Colloidal Gels Research Articles

Synergistic effect of Hypoxic Conditioning and Cell-Tethering Colloidal Gels enhanced Productivity of MSC Paracrine Factors and Accelerated Vessel Regeneration.

Microporous hydrogels have been widely used for delivering therapeutic cells. However, several critical issues, such as the lack of control over the harsh environment they are subjected to under pathological conditions and rapid egression of cells from the hydrogels, have produced limited therapeutic outcomes. To address these critical challenges, cell-tethering and hypoxic conditioning colloidal hydrogels containing mesenchymal stem cells (MSCs) are introduced to increase the productivity of paracrine factors locally and in a long-term manner. Cell-tethering colloidal hydrogels that are composed of tyramine-conjugated gelatin prevent cells from egressing through on-cell oxidative phenolic crosslinks while providing mechanical stimulation and interconnected microporous networks to allow for host-implant interactions. Oxygenating microparticlesencapsulated in tyramine-conjugated colloidal microgels continuously generated oxygen for 2 weeks with rapid diffusion, resulting in maintaining a mild hypoxic condition while MSCs consumed oxygen under severe hypoxia. Synergistically, local retention of MSCs within the mild hypoxic-conditioned and mechanically robust colloidal hydrogels significantly increased the secretion of various angiogenic cytokines and chemokines. The oxygenating colloidal hydrogels induced anti-inflammatory responses, reduced cellular apoptosis, and promoted numerous large blood vessels in vivo. Finally, mice injected with the MSC-tethered oxygenating colloidal hydrogels significantly improved blood flow restoration and muscle regeneration in a hindlimb ischemia (HLI) model.

Nonlinear viscoelasticity of filamentous fungal biofilms of Neurospora discreta

The picture of bacterial biofilms as a colloidal gel composed of rigid bacterial cells protected by extracellular crosslinked polymer matrix has been pivotal in understanding their ability to adapt their microstructure and viscoelasticity to environmental assaults. This work explores if an analogous perspective exists in fungal biofilms with long filamentous cells. To this end, we consider biofilms of the fungus Neurospora discreta formed on the air-liquid interface, which has shown an ability to remove excess nitrogen and phosphorous from wastewater effectively. We investigated the changes to the viscoelasticity and the microstructure of these biofilms when the biofilms uptake varying concentrations of nitrogen and phosphorous, using large amplitude oscillatory shear flow rheology (LAOS) and field-emission scanning electron microscopy (FESEM), respectively. A distinctive peak in the loss modulus (G″) at 30–50 % shear strain is observed, indicating the transition from an elastic to plastic deformation state. Though a peak in G″ has been observed in several soft materials, including bacterial biofilms, it has eluded interpretation in terms of quantifiable microstructural features. The central finding of this work is that the intensity of the G″ peak, signifying resistance to large deformations, correlates directly with the protein and polysaccharide concentrations per unit biomass in the extracellular matrix and inversely with the shear-induced changes in filament orientation in the hyphal network. These correlations have implications for the rational design of fungal biofilms with tuneable mechanical properties.

50550 2-Week Application of Topical Colloidal Oatmeal Gel Cream Supports the Growth of Skin Commensal Staphylococcus Epidermidis in Subjects with Mild-to-Moderate Atopic Dermatitis

50550 2-Week Application of Topical Colloidal Oatmeal Gel Cream Supports the Growth of Skin Commensal Staphylococcus Epidermidis in Subjects with Mild-to-Moderate Atopic Dermatitis

Distribution of Single-Particle Resonances Determines the Plasmonic Response of Disordered Nanoparticle Ensembles.

Understanding how colloidal soft materials interact with light is crucial to the rational design of optical metamaterials. Electromagnetic simulations are computationally expensive and have primarily been limited to model systems described by a small number of particles-dimers, small clusters, and small periodic unit cells of superlattices. In this work we study the optical properties of bulk, disordered materials comprising a large number of plasmonic colloidal nanoparticles using Brownian dynamics simulations and the mutual polarization method. We investigate the far-field and near-field optical properties of both colloidal fluids and gels, which require thousands of nanoparticles to describe statistically. We show that these disordered materials exhibit a distribution of particle-level plasmonic resonance frequencies that determines their ensemble optical response. Nanoparticles with similar resonant frequencies form anisotropic and oriented clusters embedded within the otherwise isotropic and disordered microstructures. These collectively resonating morphologies can be tuned with the frequency and polarization of incident light. Knowledge of particle resonant distributions may help to interpret and compare the optical responses of different colloidal structures, correlate and predict optical properties, and rationally design soft materials for applications harnessing light.

Surfactant-Driven Dynamic Changes in Rheology of Activated Carbon Slurry Electrodes.

Carbon black slurry electrodes are an effective means to improve flow battery performance by increasing the active surface area necessary for electrochemical reactions with a cost-effective material. Current challenges with this specific flow battery chemistry include the stability and flowability of the carbon black suspensions, especially in response to formulation choices. Advancing the manufacturing, operation, and performance of these redox flow batteries requires a deeper understanding of how slurry formulation impacts its rheological profile and ultimately battery performance. In response to this need, the linear and nonlinear rheological responses of activated carbon (AC) based slurry electrode materials used in an all-iron flow battery in the presence of a nonionic surfactant (Triton X-100) were measured. Results from these measurements show the slurry is a colloidal gel with elasticity remaining constant despite increasing surfactant concentration until α (= Csurf/CAC) < 0.65. However, at α ≥ 0.65, the slurry abruptly transitions to a fluid with no measurable yield stress. This critical surfactant concentration at which the rheological profile undergoes a dynamic change matches the concentration found previously for gel collapse of this system. Moreover, this transition is accompanied by a complete loss of electrical conductivity. From these data we conclude the site specific adsorption of surfactant molecules often used in slurry formulation has a significant and dramatic impact on the stability and flowability of these suspensions. Work presented herein demonstrates the importance of additive choices when formulating a slurry electrode.

One-pot construction of gradient colloidal gel coating for stable and efficient emulsion separation

Gradient gel coatings possess superior interfacial bonding strength and surface wettability, providing new ideas for the structure design of separation materials. However, simply and effectively combining colloidal gels that have excellent separation potential with gradient structure design remains a great challenge. Herein, a polymerization-induced microphase separation strategy based on metal ions is developed for constructing colloidal gel coatings with gradient structure on the stainless steel mesh. The colloidal gel is formed by hydrogen-bond complexation and microphase separation of acrylamide and methacrylic acid during polymerization. The metal ions generated by the hydrogen evolution corrosion of stainless steel mesh can not only be used to construct a continuous gradient structure by influencing the microphase separation process but also enhance the mechanical properties and stability of the gel coating. The preparation strategies of traditional gradient materials are limited in the manufacturing and application processes due to their complicated preparation procedures and potential requirement for special equipment assistance. In contrast, this strategy can simply and efficiently prepare colloidal gel coatings with continuous gradient structure by one-pot method under strict monomer ratio. Its unique colloid network demonstrates better wettability and permeability than conventional polymer gel. The prepared gradient colloidal gel coating exhibits excellent separation efficiency (above 99.9 %) and water flux recovery rate (≈98.75 %) in separating surfactant-stabilized emulsion. Therefore, this work provides new insights into the design and preparation of gradient colloidal gels, promoting their development in the field of water treatment.

Magnetic and pH dual responsive injectable magnetic zeolitic imidazole framework based colloidal gel for interventional treatment on hepatocellular carcinoma

Thermal ablation is frequently combined with systemic chemotherapy for treating hepatocellular carcinoma (HCC). However, the side effects of systemic chemotherapy on normal tissues limit its clinical application. Herein, we report a magnetic and pH dual-responsive colloidal gel assembled by doxorubicin (DOX)-loaded magnetic ZIF-8 and gelatin nanoparticles for HCC. The magnetic colloidal gel shows improved injectability and high functional particle loading, which could be injected through a 27G needle with an injection force as low as 8.8 N at 150 mg/mL solid content. Meanwhile, this colloidal gel could be magnetically heated and accelerated release DOX under tumor microenvironment, which presents a synergistic therapeutic effect by combining magnetic hyperthermia and localized chemotherapy. Furthermore, this colloidal gel could be manually injected interventional under ultrasound-guidance, exhibiting effective deep tumor treatment effect. Due to the high solid content, suitable injectability, and mechanical properties, the colloidal gel is also a promising embolic agent for transarterial embolization in HCC treatment.

Synthesis and Characterization of SiO2 Nanoparticles for Application as Nanoadsorbent to Clean Wastewater

By way of the sol–gel chemical synthesis method, it is possible to synthesize SiO2 nanoparticles with a defined specific particle size, a surface area, and a defined crystal structure that can be effectively used as a nanoadsorbent to remove various organic dyes. SiO2 nanoparticles were synthesized by the sol–gel method using sodium silicate (Na2SiO3) by a green method without using a tetraethyl orthosilicate (TEOS) precursor, which is very expensive and highly toxic. This sol–gel process involves the formation of a colloidal suspension (sol) and solid gelation to form a network in a continuous liquid phase (gel). In addition, it requires controlled atmospheres. XRD indicates the presence of an amorphous phase with a diffraction angle of 2θ = 23°, associated with SiO2. UV-Vis spectroscopy reveals an absorbance value in the region of 200 nm to 300 nm, associated with SiO2 nanoparticles. The application as a nanoadsorbent to remove dyes was measured, and it was found that the nanoparticles with the best performance were those that were synthesized with pH 7, showing a 97% removal with 20 mg of SiO2 nanoparticles in 60 min. Therefore, SiO2 nanoparticles can be used as a nanoadsorbent, using a low-cost and scalable method for application to remove methylene blue in an aqueous medium.

A method to assess the quality of additive manufacturing metal powders using the triboelectric charging concept

A new method to assess the quality of additive manufacturing (AM) metal powders using the triboelectric charging concept is demonstrated using CpTi, Ti6Al4V, AlSi10Mg, IN 738, and SS 316L powders. For each powder tested, the surface chemical composition was first analyzed using X-ray photoelectron spectroscopy (XPS) to determine the composition of the passivation layer. Some modifications to the current GranuCharge™ setup, developed by GranuTools™, were then performed by incorporating a flow rate measuring tool to assess how tribocharging is affected as a function of flow rate. Variations in the tribocharging response have been found with the flow rate of CpTi, AlSi10Mg and SS 316L powders. Moreover, results suggest that the tribocharging behavior might not be the same even with powders fabricated with the same passivation process. Finally, the compressed exponential model of Trachenko and Zaccone was used to reproduce the tribocharging behavior of the powders. The models were found to work best when the stretch constant β = 1.5, which is identical to the value found in other systems such as structural glasses, colloidal gels, entangled polymers, and supercooled liquids, which experience jamming when motion of individual particles become restricted, causing their motion to slow down.

Silver Nanowire Reinforced Conductive and Injectable Colloidal Gel for Effective Wound Healing Via Electrical Stimulation.

The remarkable biocapacity, injectability, and adaptability of colloidal gels lead to their widespread use in tissue engineering as irregular defect implants. However, multifunctionalities including electroconductivity and antibacterial property are highly required for colloidal gels. In addition, the inherently weak mechanical property of physically crosslinked colloidal gels limits their application. Herein, Ag nanowires (Ag NWs)-reinforced colloidal gels composed of biocompatible gelatin nanoparticles and polydopamine-modified Ag NWs through the controlled electrostatic assembly, which are injectable and conductive, are presented. 1D Ag NWs can significantly improve the mechanical and electrical properties of the colloidal gel while maintaining its inherent excellent injectability. Owing to the network of Ag NWs, the storage modulus and conductivity of the optimized Ag NW colloidal gel are 7.5 and 13 times higher, respectively, than those of the colloidal gel made up of polydopamine-modified Ag nanoparticles with equivalent Ag concentration. Further, this Ag NW colloidal gel can adapt to sharp wounds on skin, which accelerates the healing of an MRSA-infected wound via electrical stimulation.

Formation dynamics of branching structure in the slippery DLCA model.

We numerically investigated the aggregation dynamics and resulting network structures of colloidal gels using the slippery diffusion-limited cluster aggregation (DLCA) model. In this model, bonds are irreversibly formed upon the particle contacts, but the angles among them are not fixed, unlike the conventional DLCA. This allows clusters to be deformed in the process of aggregation. By characterizing the aggregation dynamics and using a reduced network scheme, our simulation revealed two distinct branching structure formation routes depending on the particle volume fraction ϕ. In lower volume fraction systems (ϕ ≤ 8%), the deformations of small-size clusters proceed prior to the percolation. When the Maxwell criterion is satisfied and the clusters become mechanically stable, the formation of the branching structure is nearly completed. After forming the branching structures, they aggregate and form a larger percolating network. Then, the aggregation proceeds through the elongation and straightening of the chain parts of the network. In higher volume fraction systems (ϕ > 8%), on the other hand, the clusters percolate, and a fine and homogeneous branching structure is formed at the early stage of the aggregation. In the aging stage, it collapses into a denser and more heterogeneous structure and becomes more stable. Our quantitative analyses of the branching structure will shed light on a new strategy for describing the network formation and elasticity of colloidal gels.

Colloidal magnetic gels for the decontamination of limited access metallic surfaces

Handling nuclear metallic waste is a crucial issue for the nuclear industry, notably by using adapted decontamination processes. Colloidal gels can be applied by spraying for nuclear decontamination of large and plane metallic surfaces, such as walls or floors. However, this implementation mode limits their use for the decontamination of inaccessible or complex geometries surfaces. For that purpose, decontamination magnetic gels have been formulated by incorporating magnetite particles in a pre-synthesized colloidal gel able to decontaminate stainless steel. Such gels can thus be attracted by a magnet, allowing remote application to surfaces with limited access. The presence of magnetite particles does not influence the inherent decontamination properties of the gel, but plays a significant role on the spreading properties by increasing the gel viscosity. Then, a linear relationship between the gel thickness and the decontamination possibilities has been highlighted. Furthermore, as the magnetite particles dissolve in the gel with time, spreading properties, and consequently the decontamination properties, are modified. Finally, a formulation compromise has to be found for a long-term storage of the gels, while maintaining their efficiency.

Noether invariance theory for the equilibrium force structure of soft matter

We give details and derivations for the Noether invariance theory that characterizes the spatial equilibrium structure of inhomogeneous classical many-body systems, as recently proposed and investigated for bulk systems (Sammüller et al 2023 Phys. Rev. Lett. 130 268203). Thereby an intrinsic thermal symmetry against a local shifting transformation on phase space is exploited on the basis of the Noether theorem for invariant variations. We consider the consequences of the shifting that emerge at second order in the displacement field that parameterizes the transformation. In a natural way the standard two-body density distribution is generated. Its second spatial derivative is thereby balanced by two further and different two-body correlation functions, which respectively introduce thermally averaged force correlations and force gradients in a systematic and microscopically sharp way into the framework. Separate exact self and distinct sum rules express this balance. We exemplify the validity of the theory on the basis of computer simulations for the Lennard–Jones gas, liquid, and crystal, the Weeks–Chandler–Andersen fluid, monatomic Molinero–Moore water at ambient conditions, a three-body-interacting colloidal gel former, the Yukawa and soft-sphere dipolar fluids, and for isotropic and nematic phases of Gay–Berne particles. We describe explicitly the derivation of the sum rules based on Noether’s theorem and also give more elementary proofs based on partial phase space integration following Yvon’s theorem.

Direct inkjet writing of polylactic acid/β-tricalcium phosphate composites for bone tissue regeneration: A proof-of-concept study.

There is an ever-evolving need of customized, anatomic-specific grafting materials for bone regeneration. More specifically, biocompatible and osteoconductive materials, that may be configured dynamically to fit and fill defects, through the application of an external stimulus. The objective of this study was to establish a basis for the development of direct inkjet writing (DIW)-based shape memory polymer-ceramic composites for bone tissue regeneration applications and to establish material behavior under thermomechanical loading. Polymer-ceramic (polylactic acid [PLA]/β-tricalcium phosphate [β-TCP]) colloidal gels were prepared of different w/w ratios (90/10, 80/20, 70/30, 60/40, and 50/50) through polymer dissolution in acetone (15% w/v). Cytocompatibility was analyzed through Presto Blue assays. Rheological properties of the colloidal gels were measured to determine shear-thinning capabilities. Gels were then extruded through a custom-built DIW printer. Space filling constructs of the gels were printed and subjected to thermomechanical characterization to measure shape fixity (Rf) and shape recovery (Rr) ratios through five successive shape memory cycles. The polymer-ceramic composite gels exhibited shear-thinning capabilities for extrusion through a nozzle for DIW. A significant increase in cellular viability was observed with the addition of β-TCP particles within the polymer matrix relative to pure PLA. Shape memory effect in the printed constructs was repeatable up to 4 cycles followed by permanent deformation. While further research on scaffold macro-/micro-geometries, and engineered porosities are warranted, this proof-of-concept study suggested suitability of this polymer-ceramic material and the DIW 3D printing workflow for the production of customized, patient specific constructs for bone tissue engineering.

Synthesis and structural characterization of CaMg0.5CoxNi0.5-xSi2O6 (0 ≤ x ≤ 0.5) solid solutions as a colouring substance

In this study, CaMg0.5CoxNi0.5-xSi2O6 (0.0 ≤ x ≤ 0.5) solid solutions with a diopside structure were prepared to reduce the cobalt and nickel amounts compared to M2SiO4 or MgMSiO4 (M = Co, Ni) compounds or CaCoxNi1-xSi2O6 solid solutions. Colloidal gels were obtained by adding an ammonia aqueous solution to the suspensions of precursors in aqua until pH = 10. Diopside structure began to develop at 800 °C and at 1000–1200 °C crystallinity and pink colour of materials (x ≠ 0) are optimal. In both CaMg0.5CoxNi0.5-xSi2O6 (0.0 ≤ x ≤ 0.5) and MgCoxNi1-xSiO4 (0.0 ≤ x ≤ 1.0) solid solutions with diopside and olivine structures the position of the third transition of octahedral Co(II), 4T1 → 4T1(P), is centred into the green absorption range and the observed colour is pink. A higher red amount in diopside than in olivine structure can be explained by the minor width of band of this third transition (minor distortion of octahedral M1 site) and shorter mean M1-O distances (M = Ni, Co).

Controlling the rheo-electric properties of graphite/carbon black suspensions by ‘flow switching’

The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of ‘granular’ active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenomena can emerge unexpectedly, with some composites exhibiting a unique rheological bi-stability between high-yield-stress and low-yield-stress states. Here we report such bi-stability in suspensions of non-Brownian graphite and colloidal carbon black in oil, a model system to mimic composite suspensions for energy applications. Steady shear below a critical stress elicits a transition to a persistent mechanically weak and poorly conducting state, which must be ‘rejuvenated’ using high-stress shear to recover a stronger, high-conductivity state. Our findings highlight the highly tunable nature of binary granular/gel composite suspensions and present new possibilities for optimising mixing and processing conditions for Li-ion battery slurries.Graphical abstract

Mechanical Self-Organization of Particle Networks during Uniaxial Compression Yielding

Colloidal gels, sparse particle networks with large voids, are fundamental model systems of disordered porous materials. Unlike dense amorphous solids, they exhibit significant volumetric deformation while expelling solvents when subjected to external compression. Despite their importance in both natural and industrial settings, the relationship between their network microstructure and compressive yielding behavior has remained elusive. To address this problem, we employ confocal microscopy and a specially designed sample cell to observe the gravity-induced collapsing of colloidal gels at a single-particle level. The experimental insight gained is complemented by simulation results for gravitational collapse and homogeneous uniaxial compression. We find that, during compression, the microstructure of gels is uniquely determined solely by the local volume fraction. This relationship remains independent of the deformation strain history but is subtly influenced by the preparation history of the initial state. In contrast, compressive stress evolves as a unique function of local volume fraction, unaffected by both preparation and strain history, as long as the interparticle interaction remains identical. Moreover, we unveil that local yielding occurs in highly strained, narrow network domains, while highly stressed particles form chainlike structures to support the external stress. These findings suggest that colloidal gels undergoing compressive plastic deformation mechanically self-organize into a unique history-independent state to satisfy mechanical balance in a quasistatic condition, providing crucial microscopic insights into the compressive yielding behavior of particle network materials. Published by the American Physical Society 2024

Tribological and Rheological Study of Thixotropic Gels of 2D Nanoparticles.

A thixotropic colloidal gel constituting an aqueous dispersion of synthetic clay Laponite with varying concentrations of salt has been studied for its rheological and tribological performance as a lubricant. We observed that the incorporation of NaCl induces notable enhancements in the colloidal gel's relaxation time, elastic modulus, and yield stress. Although an increase in NaCl concentration decreases the material's relaxation time dependence on waiting time (tw), overall, the strength of its thixotropic character has been observed to increase with an increase in salt concentration. The analysis of friction and wear indicated that the utilization of a thixotropic colloidal gel of Laponite with a higher concentration of NaCl resulted in progressively greater reductions in both the coefficient of friction and specific wear rates under various load-speed conditions. Severe abrasive wear on disc surface under dry test, gradually mitigated upon the introduction of these lubricants. Two simultaneous lubricating mechanisms, first, the smooth sliding of the friction pair, facilitated by the alignment of Laponite particles in the direction of shear forces, and second, the stable structure of Laponite, coupled with the addition of NaCl, enabling continuous replenishment of the wear track with lubricant, are attributed to lubrication effectiveness.

Rheological and microstructural characterization of lotus seed milks and their glucono-δ-lactone induced acid-set milk gels: 2. effect of oil addition

In a recent paper (Li, Li, Zhao, Cui, & Hemar, 2023) we showed that it was possible to manufacture lotus seed milks (LSM) and to use Glucono-δ-lactone (GDL) to prepare LSM acid-gels. LSM milks are known to have a very low lipid content, thus here the effect of soya oil addition is investigated in order to understand how LSM fortification with oil can affect its viscosity, and the mechanical and structural properties of the acid LSM gels. The oil was homogenized under conditions which resulted in oil droplets sizes in the range 0.1–0.4 μm. Heating the emulsions (80 °C, 30 min) resulted in a slight increase in particle size due to coalescence. The viscosity of emulsions was quasi-Newtonian and increased markedly with the increase in oil concentration. This was explained partly by the adsorption of the LSM aggregates at the interface of oil droplets, which increases considerably the effective volume fraction of the oil droplets. LSM emulsions when acidified by GDL formed colloidal gels with oil droplets embedded in the protein network, where the syneresis decreased with oil concentration, suggesting that the oil droplets should be considered as active fillers. The gel strength increased linearly with the oil concentration, but with a higher rate for the unheated emulsions than the heated ones. This is due to the decrease in the oil droplets number because of coalescence. This study demonstrates that homogenization of oil into LSM offers a route to manipulate the physico-chemical properties of the LSM emulsions and their acid gels.

A multicentre, randomized, double blind, placebo controlled pilot study to evaluate the efficacy and safety of colloidal Nano silver gel (SilverSol) in the treatment of bacterial vaginosis, vulvovaginal candidiasis and trichomoniasis

The study evaluated the efficacy and safety of colloidal nano silver gel (SilverSol Vagigel) (A patented technology from American Biotech Labs, USA) in combination with 0.2% lactic acid in the female subjects for the treatment of vaginal infections.This study was a multicenter, randomized, double-blind, placebo-controlled pilot study in which post-menarchal female subjects between 18 and 65 years of age clinically diagnosed with bacterial vaginosis and vulvovaginal candidiasis were enrolled. The participants were randomized to receive treatment with SilverSol Vagigel or placebo (vehicle) gel (both treatments as one 4 gm application inserted into the vagina with an applicator device, once daily at bedtime for internal use and 2 gm gel for local application to the vulva and vagina for external use twice daily for a period of 14 days). The primary endpoint evaluated was the proportion of subjects achieving clinical cure. The secondary endpoint was the proportion of subjects achieving microbiological cure at the end of the study visit. A total of 57 subjects were randomized in the study out of which 38 subjects were randomized in SilverSol Vagigel arm and 19 subjects were randomized in placebo arm. SilverSol Vagigel significantly improved cure rates of vaginal infections compared to placebo. The proportion of subjects achieving clinical cure of vaginal infections was higher i.e., 33 (86.84%) subjects in SilverSol Vagigel arm compared to 07 (41.18%) subjects in Placebo gel arm (p-value: 0.0009). The clinical cure rate with SilverSol Vagigel was 81.82% (P=0.1758) for bacterial vaginosis and 92.59% (P=0.0010) for vulvovaginal candidiasis patients at the end of the study. Overall SilverSol Vagigel treatment resulted in a significantly higher microbial cure of vaginal infections (P=0.0028) compared to placebo, with a microbial cure rate of 100% for bacterial vaginosis (P=0.0330) and 85.19% for vulvovaginal candidiasis (P=0.0097). No adverse events were reported in subjects treated with SilverSol Vagigel.Colloidal Nano Silver Gel (SilverSol Vagigel) was effective and safe in treating bacterial vaginosis and vulvovaginal candidiasis.