Collection 6 Research Articles

Evaluation and Comparison of MODIS Collection 6.1 and Collection 6 Dark Target Aerosol Optical Depth over Mainland China Under Various Conditions Including Spatiotemporal Distribution, Haze Effects, and Underlying Surface

AbstractModifications such as degrading the retrieval quality of mixed pixels in the coastline area and revising surface characterization scheme have been made to the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6.1 (C6.1) Dark Target (DT) aerosol optical depth (AOD) product to address inaccuracy over urban areas. In this study, comprehensive evaluations of modifications to the MODIS C6.1 DT AOD product, in comparison with Collection 6 (C6), are conducted over mainland China under different spatial distributions, seasons, and air quality for the period 2010–2017, combined with validation against Aerosol Robotic Network (AERONET) AOD measurements. The preliminary result showed that the C6.1 DT AOD product in China displayed an overall good performance with high R2 (0.87) and low root‐mean‐square error (0.23) against ground measurements. Moreover, the C6.1 DT AOD product was an overall improvement over C6, with greater correlation and lower uncertainty against ground measurements, especially for the North China Plain and Central China, although this was not the case for Western China. The improvement was also seasonal, being distinct in spring but less pronounced in winter, and negatively correlated with the level of air pollution. Furthermore, the analysis of DT AOD retrievals in different urbanized areas illustrated that the updated DT algorithm worked well in completely urbanized areas, where 97% of C6.1 DT AOD retrievals were an improvement over C6, while approximately 10% of C6.1 DT AOD retrievals were deteriorated in semiurbanized areas. Additionally, the DT AOD retrievals in areas with relatively low enhanced vegetation index and high surface reflectance were significantly improved, mitigating problems associated with the DT algorithm, further improving the reliability of MODIS DT AOD products.

Response Versus Scan-Angle Assessment of MODIS Reflective Solar Bands in Collection 6.1 Calibration

The Moderate Resolution Imaging Spectroradiometer (MODIS) instruments onboard the Aqua and Terra satellites have been operated for nearly two decades, producing high-quality earth observation data sets suitable for a broad range of scientific studies regarding the earth’s land, ocean, and atmospheric processes. The high radiometric accuracy of MODIS reflective solar band (RSB) calibration has also served as benchmark measurements for on-orbit cross-calibration studies. As the two MODIS instruments have operated well beyond their design lifespan of six years, the measurements from the onboard calibrators alone become inadequate to characterize the sensor’s response at all scan angles, as evinced by long-term drifts observed at certain scan positions of the Aqua-MODIS 0.64- and 0.86- $\mu \text{m}$ bands in Collection 6 (C6) data set. The latest MODIS Level 1B C6.1 data set incorporates earth-view response trending from invariant desert sites as supplemental inputs to characterize the scan-angle calibration dependencies for all RSB. This article presents a deep convective cloud (DCC)-based calibration approach for an independent evaluation of the MODIS RSB response versus scan-angle (RVS) performance in C6.1. The long-term calibration stability and RVS differences in C6.1 have been significantly improved for Aqua-MODIS RSB. The observed RVS differences of more than 2% in Aqua-MODIS C6 bands 1 and 2 have been reduced to within 1% in C6.1. Some RSBs of Terra-MODIS have suffered temporal drifts up to ~2% and calibration shifts up to 3%, particularly around 2016 when the Terra satellite entered into safe mode. The DCC approach has been found very effective in tracking the on-orbit RVS changes over time.

Understanding MODIS dark-target collection 5 and 6 aerosol data over China: Effect of surface type, aerosol loading and aerosol absorption

For regions where limited in-situ observations are available for use as a reference, such as in China, the understanding of how changes in the Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol retrieval algorithm impact the data quality is limited. In this paper, the MODIS-Aqua Aerosol Optical Thickness (AOT) Collection 5 (C5) and 6 (C6) Dark-Target (DT) products are evaluated by comparison with similar products from the China Aerosol Remote Sensing NETwork (CARSNET) and the Aerosol Robotic Network (AERONET) in China for the year 2008. The validation data are analyzed for key factors affecting the results of the MODIS-DT aerosol retrieval algorithm, including surface type, aerosol loading and aerosol absorption. The impacts of the change from the C5 to the C6 versions of the MODIS AOT retrieval algorithm are discussed in detail. The main findings are: (1) The agreement from retrieval aspects between both MODIS C5/C6 and CARSNET-AERONET for most AOT values over distinct regions indicates that the conclusions obtained from C5 hold for C6; (2) MODIS-DT has an extended coverage (more retrievals) with good quality due to the change of upstream data (calibration, cloud masking, etc); (3) About 64% of the MODISDT C6 AOT data over China fall within the (±0.15 AOT ± 0.05) error envelope; (4) positive AOT differences between C6 and C5 over relatively dark surfaces and negative differences over relatively bright surfaces due to the change of surface parameterization have been observed; (5) the AOT difference between MODIS and CARSNET-AERONET relating to AOT loading is not significant, especially for large AOT; (6) MODIS-DT performs well for absorbing aerosol over relatively bright surfaces.

Ice Cloud Properties From Himawari-8/AHI Next-Generation Geostationary Satellite: Capability of the AHI to Monitor the DC Cloud Generation Process

The Japan Meteorological Agency (JMA) successfully launched the Himawari-8 (H-8) new-generation geostationary meteorological satellite with the Advanced Himawari Imager (AHI) sensor on October 7, 2014. The H-8/AHI level-2 (L2) operational cloud property products were released by the Japan Aerospace Exploration Agency during September 2016. The Voronoi light scattering model, which is a fractal ice particle habit, was utilized to develop the retrieval algorithm called “Comprehensive Analysis Program for Cloud Optical Measurement” (CAPCOM-INV)-ice for the AHI ice cloud product. In this paper, we describe the CAPCOM-INV-ice algorithm for ice cloud products from AHI data. To investigate its retrieval performance, retrieval results were compared with 2000 samples of the ice cloud optical thickness and effective particle radius values. Furthermore, AHI ice cloud products are evaluated by comparing them with the MODIS collection-6 (C6) products. As an experiment, cloud property retrievals from AHI measurements, with an observation interval time of 2.5 min and ground-based rainfall observation radar data (the latter of which is supplied by the JMA, with a 1-km grid mesh), are used to investigate the generation processes of deep convective (DC) cloud in the vicinity of the Kyushu island, Japan. It revealed that AHI measurements have the capability of monitoring the growth processes, including variation of the cloud properties and the precipitation in the DC cloud.

Global validation of columnar water vapor derived from EOS MODIS-MAIAC algorithm against the ground-based AERONET observations

The water vapor is a relevant greenhouse gas in the Earth's climate system, and satellite products become one of the most effective way to characterize and monitor the columnar water vapor (CWV) content at global scale. Recently, a new product (MCD19) was released as part of MODIS (Moderate Resolution Imaging Spectroradiometer) Collection 6 (C6). This operational product from Multi-Angle Implementation for Atmospheric Correction (MAIAC) algorithm includes a high 1 km resolution CWV retrievals. This study presents the first global validation of MAIAC C6 CWV obtained from MODIS MCD19A2 product. This evaluation was performed using Aerosol Robotic Network (AERONET) observations at 265 sites (2000–2017). Overall, the results show a good agreement between MAIAC/AERONET CWV retrievals, with correlation coefficient higher than 0.95 and RMS error lower than 0.250 cm. The binned error analysis revealed an underestimation (~10%) of Aqua CWV retrievals with negative bias for CWV higher than 3.0 cm. In contrast, Terra CWV retrievals show a slope of regression close to unity and a low mean bias of 0.075 cm. While the accuracy is relatively similar between 1.0 and 5.0 cm for both sensor products, Terra dataset is more reliable for applications in humid tropical areas (>5.0 cm). The expected error was defined as ±15%, with >68% of retrievals falling within this envelope. However, the accuracy is regionally dependent, and lower error should be expected in some regions, such as South America and Oceania. Since MODIS instruments have exceeded their design lifetime, time series analysis was also presented for both sensor products. The temporal analysis revealed a systematic offset of global average between Terra and Aqua CWV records. We also found an upward trend (~0.2 cm/decade) in Terra CWV retrievals, while Aqua CWV retrievals remain stable over time. The sensor degradation influences the ability to detect climate signals, and this study indicates the need for revisiting calibration of the MODIS bands 17–19, mainly for Terra instrument, to assure the quality of the MODIS water vapor product. Finally, this study presents a comprehensive validation analysis of MAIAC CWV over land, raising the understanding of its overall quality.

VIIRS Deep Blue Aerosol Products Over Land: Extending the EOS Long‐Term Aerosol Data Records

AbstractA primary goal of the Deep Blue (DB) project is to create consistent long‐term aerosol data records, suitable for climate studies, using multiple satellite instruments. In order to continue Earth Observing System (EOS)‐era aerosol products into the Joint Polar Satellite System era, we have successfully ported the DB algorithm to process data from the Visible Infrared Imaging Radiometer Suite (VIIRS). Although the basic structure of the VIIRS algorithm is similar to that for the Moderate Resolution Imaging Spectroradiometer (MODIS), many enhancements have been made compared to the MODIS collection 6 (C6) version. Most have also been implemented in the latest MODIS Collection 6.1 (C6.1). For example, a new smoke mask was developed based on the spectral curvature of measured reflectance to distinguish biomass burning smoke from weakly absorbing urban/industrial aerosols. Consequently, a new aerosol‐type flag was added into the VIIRS DB data set. In addition, new dust models have been developed to account for the nonsphericity of mineral dust. As a result, a discontinuity in the retrieved aerosol optical depth (AOD) of Saharan dust plumes seen in MODIS C6 products near the boundary between North Africa and the Atlantic has been much reduced. We have also evaluated the VIIRS and MODIS Terra/Aqua C6.1 AOD against Aerosol Robotic Network data. VIIRS and MODIS retrievals show similar performance; around 80% of matchups agree with Aerosol Robotic Network within the expected error of ±(0.05 + 20)%, indicating that DB can provide consistent AOD through the historical EOS and present Joint Polar Satellite System eras.

Validation of Collection 6 MODIS land surface temperature product using in situ measurements

Land surface temperature (LST) is an important physical quantity at the land-atmosphere interface. Since 2016 the Collection 6 (C6) MODIS LST product is publicly available, which includes three refinements over bare soil surfaces compared to the Collection 5 (C5) MODIS LST product. To encourage the use of the C6 MODIS LST product in a wide range of applications, it is necessary to evaluate the accuracy of the C6 MODIS LST product. In this study, we validated the C6 MODIS LST product using temperature-based method over various land cover types, including grasslands, croplands, cropland/natural vegetation mosaic, open shrublands, woody savannas, and barren/sparsely vegetated. In situ measurements were collected from various sites under different atmospheric and surface conditions, including seven SURFRAD sites (BND, TBL, DRA, FPK, GCM, PSU, and SXF) in the United States, three KIT sites (EVO, KAL, and GBB) in Portugal and Namibia, and three HiWATER sites (GBZ, HZZ, and HMZ) in China. The spatial representativeness of the in situ measurements at each site was separately evaluated during daytime and nighttime using all available clear-sky ASTER LST products at 90 m spatial resolution. Only six sites during daytime are selected as sufficiently homogeneous sites despite the usually high spatial thermal heterogeneity, whereas during nighttime most sites can be considered to be thermally homogeneous and have similar LST and air temperature. The C6 MODIS LST product was validated using in situ measurements from the selected homogeneous sites during daytime and nighttime: except for the GBB site, large RMSE values (>2 K) were obtained during daytime. However, if only satellite LST with a high spatial thermal homogeneity on the MODIS pixel scale are used for LST validation, the best daytime accuracy (RMSE <1.3 K) for the C6 MODIS LST product is achieved over the BND and DRA sites. Except for the DRA site, the RMSE values during nighttime are <2 K at the selected homogeneous sites. Furthermore, the accuracy of the C6 MODIS LST product was compared with that of the C5 MODIS LST product during nighttime at the selected homogeneous sites. Except for the GBB site, there are only small differences (<0.4 K) between the RMSE values for the C5 and C6 MODIS LST products.

Differences in monitoring vegetation dynamics between Moderate Resolution Imaging Spectroradiometer Collection 5 and Collection 6 vegetation index products on the Loess Plateau, China

ABSTRACTAccurately monitoring vegetation dynamics on the Loess Plateau (LP) is critical for evaluating the benefits of ecological restoration projects. The Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation index (VI) product has been a primary data source for monitoring vegetation dynamics. However, MODIS Collection 5 (C5) VI products are known to be affected by sensor degradation, which has been addressed in the newly released MODIS Collection 6 (C6) VI products. Herein, we compared the spatiotemporal differences in vegetation dynamics between the Terra MODIS C5 and C6 data products and among different annual value retrieval methods for the LP during 2001–2016. Our results indicated a lower magnitude but a greener trend in the normalized difference vegetation index (NDVI), and areas with significant greening (p < 0.050) were found to increase by about 13%–16% from C5 to C6, depending on the retrieval method. Regions with either no particular trend or a downward trend in vegetation derived from the Terra-C5 NDVI mostly showed significant increasing trends based on the Terra-C6 NDVI. Moreover, the different retrieval methods also exhibited differences in the evaluation of vegetation dynamics, with the largest differences in terms of both magnitude and trend being identified with the annual maximum value method. This highlighted a compelling need to choose suitable methods in different regions for the retrieval of annual VI values, in order to facilitate more robust and comparable conclusions. Additionally, discrepancies also existed in the response of vegetation to climate variations between the Terra-C5 and C6 products for all three annual VI retrieval methods. Our findings, based on multiple products and analysis methods, may lead to improved understanding of both vegetation dynamics and their linkage to climate variables. The results suggest that caution be utilized when using only MODIS Terra-C5 products to evaluate vegetation dynamics and calibrate ecosystem models.

Comparison and evaluation of MODIS Multi-angle Implementation of Atmospheric Correction (MAIAC) aerosol product over South Asia

The Multiangle Implementation of Atmospheric Correction (MAIAC) is a new generic algorithm applied to collection 6 (C6) MODIS measurements to retrieve Aerosol Optical Depth (AOD) over land at high spatial resolution (1 km). This study is the first evaluation of the MAIAC AOD from MODIS Aqua (A) and Terra (T) satellites between 2006 and 2016 over South Asia. The retrieval accuracy of MAIAC was assessed by comparing it to ground-truth AErosol RObotic NETwork (AERONET) AOD, as well as to AOD retrieved by the two operational MODIS algorithms: Dark Target (DT) and Deep Blue (DB). MAIAC AOD showed higher spatial coverage and retrieval frequency than either the DT or the DB AOD retrievals. The high spatial resolution of the MAIAC retrievals enhances the capability to distinguish aerosol sources and to determine fine aerosol features, such as wildfire smoke plumes and haze over complex geographical regions, and provides more retrievals in conditions that are cloudy or when the surface is partially covered by snow. In comparison to AERONET AOD, MAIAC AOD shows a better accuracy than both DT and DB AOD. A higher number of MAIAC-AERONET AOD matchups demonstrate the capability of MAIAC to retrieve AOD over varied surfaces, different aerosol types and loadings. Our results demonstrate high retrieval accuracy in term of the Expected Error (EE) (A/T, EE: 72.22%, 73.50%), and low root mean square error (A/T, RMSE: 0.148, 0.164), root mean bias (RMB) (A/T, RMB: 0.978, 1.049) and mean absolute error (MAE) (A/T, MAE: 0.098, 0.096). Moreover, MAIAC has a lower bias as a function of the viewing geometry and the aerosol type among the three retrieval algorithms. MAIAC performed well over bright and vegetated land surfaces, showing the highest retrieval accuracy over dense vegetation and particularly well in retrieving smoke AOD, yet it underestimated dust AOD. In conclusion, MAIAC's ability to provide AOD at high spatial resolution appears promising over South Asia, thus having advantage over contemporary aerosol retrieval algorithms for epidemiological and climatological studies. CapsuleIn comparison with MODIS DT and DB AOD, and AERONET AOD, MAIAC shows improved accuracy and lower bias over South Asia, as well as with greater spatial coverage.

Evaluation and modification of SARA high-resolution AOD retrieval algorithm during high dust loading conditions over bright desert surfaces

Many studies have been carried out for the validation of Aerosol Optical Depth (AOD) retrieved using MODerate resolution Imaging Spectroradiometer (MODIS) satellite data at the spatial resolution of several to several tens of km. Most of the validation efforts have focused on urban areas with fewer studies focused on deserts with high amounts of dust. On the other hand, calculating AOD at a high spatial resolution over desert surfaces is of high interest to identify local and accurate dust source regions. In this study, two different high-resolution MODIS AOD retrieval algorithms were evaluated to investigate the nature of high dust loading events over the Middle East region. These algorithms include the Simplified Aerosol Retrieval Algorithm (SARA) at 500 m resolution based on the MOD09 Level 2 daily (original SARAMOD09) and MCD43A4 16 day (modified SARAMCD43) surface reflectance products. These algorithms were validated using AERONET AOD observations at Kuwait University, and accuracy was evaluated using descriptive statistics and Expected Error (EE) over land. Also, the results of these algorithms were evaluated with the Collection 6 (C6) Deep Blue algorithm at 10 km spatial resolution (DB10km). Results show that the SARAMCD43 and SARAMOD09 AOD retrievals are well correlated (r) with AERONET data (SARAMCD43 = 0.89 and SARAMOD09 = 0.84), with a larger number of retrievals falling within the Expected Error (SARAMCD43 = 86% and SARAMOD09 = 77%) than the DB (DB10km = 60%) AOD product. The SARAMCD43 AOD exhibited good agreement with DB10km AOD over desert surfaces areas during high aerosol loading events, with an average correlation coefficient of 0.92, RMSE of 0.09, and mean absolute error (MAE) of 0.08. While SARAMOD09 AOD over background desert areas is similar to SARAMCD43, significant differences were observed over high aerosol loading areas and SARAMOD09 dramatically underestimates AOD. The results demonstrate that: (i) the SARA algorithm (regardless of surface reflectance data used) is more robust than the MODIS AOD products (both DT and DB), and is better able to represent spatial dust aerosol conditions with an accurate AOD over desert areas over a range of low to high dust pollutant levels; (ii) SARAMCD43 is well correlated with the DB AOD observations and provides AOD with much greater accuracy and reliability than SARAMOD09 over desert areas during severe dust loading events.

Evaluation and comparison of MODIS Collection 6.1 aerosol optical depth against AERONET over regions in China with multifarious underlying surfaces

In this study, we evaluated the performance of the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6.1 (C6.1) aerosol optical depth (AOD) products and compared them with the Collection 6 (C6) products over regions in China with multifarious underlying surfaces during 2001–2016. The AOD retrievals were validated against 20 AERONET (V3) sites, and the results show that the correlation coefficient (R) for dark target (DT) retrievals in C6.1 is 0.946, while the fraction within the expected error (EE) can be considered relatively low at only 54.03%. Deep blue (DB) retrievals in C6.1 have a slightly lower R value (0.931), but the other criteria are superior to DT. Comparing the results over urban and vegetation areas in C6.1, the overall quality of the DB retrievals is better than the DT retrievals in urban areas. The performance of DT is significantly superior to DB in the low elevation vegetation (LEV) areas. For the high elevation vegetation (HEV) areas, DB performs integrally better than DT. In the spatial distribution aspect in C6.1, most of the DB AOD values are less than those of DT, and the relationship between DT and DB varies with the land cover types and surface reflectance. For the AOD coverage in C6.1, DT retrievals with high coverage mainly distribute in east-central China. However, the effects of high surface reflectance lead to low AOD coverage in the southwest. In contrast, the AOD coverage of DB tends to be high in areas where the main land cover type is arid or semiarid and tends to be low in areas affected by snow. In terms of the comparison between C6.1 and C6, the overestimation of DT over urban areas in C6 is effectively mitigated in C6.1. However, a nearly systematic decline in DT is discovered in C6.1 as well. With respect to DB, consistent AOD coverage distribution is observed, with only subtle distinction. The AOD coverage of DB in C6.1 appears higher than that in C6 in the middle, south, and northeast of China. The quality of the DB retrievals in C6.1 increases slightly compared to C6, and the major improvements are observed for the coarse aerosol particles and for high elevation areas at surface reflectance from 0.11 to 0.2, respectively.

Cloud Effective Emissivity Retrievals Using Combined Ground-Based Infrared Cloud Measuring Instrument and Ceilometer Observations

In this paper, a new inversion procedure for cloud effective emissivity retrievals using a combined ground-based infrared cloud measuring instrument with ceilometer was developed. A quantitative sensitivity and performance analysis of the proposed method was also provided. It was found that the uncertainty of the derived effective emissivity was mainly associated with errors on the measurement radiance, the simulated radiance of clear sky and blackbody cloudy sky. Furthermore, the retrieval at low effective emissivity was most sensitive to the simulated clear sky radiances, whereas the blackbody cloudy sky radiance was the prevailing source of uncertainty at high emissivity. This newly proposed procedure was applied to the measurement taken in the CMA Beijing Observatory Station from November 2011 to June 2012 by the whole-sky infrared cloud-measuring system (WSIRCMS) and CYY-2B ceilometer. The cloud effective emissivity measurements were in good agreement with that of the MODIS/AQUA MYD06 Collection 6 (C6) cloud products. The mean difference between them was 0.03, with a linear correlation coefficient of 0.71. The results demonstrate that the retrieval method is robust and reliable.

Evaluation of Collection-6 MODIS Land Surface Temperature Product Using Multi-Year Ground Measurements in an Arid Area of Northwest China

Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) products are widely used in ecology, hydrology, vegetation monitoring, and global circulation models. Compared to the collection-5 (C5) LST products, the newly released collection-6 (C6) LST products have been refined over bare soil pixels. This study aims to evaluate the C6 MODIS 1-km LST product using multi-year in situ data covering barren surfaces. Evaluation using all in situ data shows that the MODIS C6 LSTs are underestimated with a root-mean-square error (RMSE) of 2.59 K for the site in the Gobi area, 3.05 K for the site in the sand desert area, and 2.86 K for the site in the desert steppe area at daytime. For nighttime LSTs, the RMSEs are 2.01 K, 2.88 K, and 1.80 K for the three sites, respectively. Both biases and RMSEs also show strong seasonal signals. Compared to the error of C5 1-km LSTs, the RMSE of C6 1-km LST product is smaller, especially for daytime LSTs, with a value of 2.24 K compared to 3.51 K. The large errors in the sand desert region are presumably due to the lack of global representativeness of the magnitude of emissivity adjustment and misclassification for the barren surface causing error in emissivities. It indicates that the accuracy of the MODIS C6 LST product might be further improved through emissivity adjustment with globally representative magnitude and accurate land cover classification. From this study, the MODIS C6 1-km LST product is recommended for applications.

Calibration Changes to Terra MODIS Collection-5 Radiances for CERES Edition 4 Cloud Retrievals.

Previous research has revealed inconsistencies between the Collection 5 (C5) calibrations of certain channels common to the Terra and Aqua MODerate-resolution Imaging Spectroradiometers (MODIS). To achieve consistency between the Terra and Aqua MODIS radiances used in the Clouds and the Earth's Radiant Energy System (CERES) Edition 4 (Ed4) cloud property retrieval system, adjustments were developed and applied to the Terra C5 calibrations for channels 1-5, 7, 20, and 26. These calibration corrections were developed independently of those used for MODIS Collection 6 (C6) data, which became available after the CERES Ed4 processing had commenced. The comparisons demonstrate that the corrections applied to the Terra C5 data for CERES Edition 4 generally resulted in Terra-Aqua radiance consistency that is as good as or better than that of the C6 datasets. The C5 adjustments resulted in more consistent Aqua and Terra cloud property retrievals than seen in the previous CERES edition. Other calibration artifacts were found in one of the corrected channels and in some of the uncorrected thermal channels after Ed4 began. Where corrections were neither developed nor applied, some artifacts are likely to have been introduced into the Ed4 cloud property record. For example, the degradation in the Aqua MODIS 0.65-μm channel in both the C5 and C6 datasets affects trends in cloud optical depth retrievals. Thus, despite the much-improved consistency achieved for the Terra and Aqua datasets in Ed4, the CERES Ed4 cloud property datasets should be used cautiously for cloud trend studies because of those remaining calibration artifacts.

Estimation and Validation of Collection 6 Moderate Resolution Imaging Spectroradiometer Aerosol Products for East Asia

The operational aeroscthm, a substantially improved version of the collection 5 (C5) algorithm, uses an enhanced aerosol optical thickness (AOT) retrieval process consisting of new surface reflection and aerosol models. This study reports on the estimation and validation of the two latest versions, the C5 and C6 MODIS aerosol products over the East Asian region covering 20°N to 56°N and 80°E to 150°E. This study also presents a comparative validation of the two versions(C5 and C6) of algorithms with different methods (Dark Target(DT) and Deep Blue (DB) retrieval methods) from the Terra and Aqua platforms to make use of the Aerosol Robotic Network(AERONET) sites for the years 2000–2016. Over the study region, the spatially averaged annual mean AOT retrieved from C6 AOT is about 0.035(5%) less than the C5 counterparts. The linear correlations between MODIS and AERONET AOT are R = 0.89 (slope = 0.86) for C5 and R = 0.95 (slope = 1.00) for C6. Moreover, the magnitude of the mean error in C6 AOT-the difference between MODIS AOT and AERONET AOT-is 40% less than that in C5 AOT.

The Collection 6 MODIS burned area mapping algorithm and product

The two Moderate Resolution Imaging Spectroradiometer (MODIS) instruments on-board NASA's Terra and Aqua satellites have provided nearly two decades of global fire data. Here, we describe refinements made to the 500-m global burned area mapping algorithm that were implemented in late 2016 as part of the MODIS Collection 6 (C6) land-product reprocessing. The updated algorithm improves upon the heritage Collection 5.1 (C5.1) MCD64A1 and MCD45A1 algorithms by offering significantly better detection of small burns, a modest reduction in burn-date temporal uncertainty, and a large reduction in the extent of unmapped areas. Comparison of the C6 and C5.1 MCD64A1 products for fifteen years (2002–2016) on a regional basis shows that the C6 product detects considerably more burned area globally (26%) and in almost every region considered. The sole exception was in Boreal North America, where the mean annual area burned was 6% lower for C6, primarily as a result of a large increase in the number of small lakes mapped (and subsequently masked) at high latitudes in the upstream C6 input data. With respect to temporal reporting accuracy, 44% of the C6 MCD64A1 burned grid cells were detected on the same day as an active fire, and 68% within 2 days, which represents a substantial reduction in temporal uncertainty compared to the C5.1 MCD64A1 and MCD45A1 products. In addition, an areal accuracy assessment of the C6 burned area product undertaken using high resolution burned area reference maps derived from 108 Landsat image pairs is reported.

Exploring systematic offsets between aerosol products from the two MODIS sensors.

Long-term measurements of global aerosol loading and optical properties are essential for assessing climate-related questions. Using observations of spectral reflectance and radiance, the dark-target (DT) aerosol retrieval algorithm is applied to Moderate-resolution Imaging Spectroradiometer sensors on both Terra (MODIS-T) and Aqua (MODIS-A) satellites, deriving products (known as MOD04 and MYD04, respectively) of global aerosol optical depth (AOD at 0.55 μm) over both land and ocean, and Angstrom Exponent (AE derived from 0.55 and 0.86 μm) over ocean. Here, we analyse the overlapping time series (since mid-2002) of the Collection 6 (C6) aerosol products. Global monthly mean AOD from MOD04 (Terra with morning overpass) is consistently higher than MYD04 (Aqua with afternoon overpass) by ~13% (~0.02 over land and ~0.015 over ocean), and this offset (MOD04 - MYD04), has seasonal as well as long-term variability. Focusing on 2008, and deriving yearly gridded mean AOD and AE, we find that over ocean, the MOD04 (morning) AOD is higher and the AE is lower. Over land, there is more variability, but only biomass-burning regions tend to have AOD lower for MOD04. Using simulated aerosol fields from the Goddard Earth Observing System (GEOS-5) Earth system model, and sampling separately (in time and space) along each MODIS-observed swath during 2008, the magnitudes of morning versus afternoon offsets of AOD and AE are smaller than those in the C6 products. Since the differences are not easily attributed to either aerosol diurnal cycles or sampling issues, we test additional corrections to the input reflectance data. The first, known as C6+, corrects for long-term changes to each sensors' polarization sensitivity, response-versus-scan angle, and to cross-calibration from MODIS-T to MODIS-A. A second convolves the de-trending and cross-calibration into scaling factors. Each method was applied upstream of the aerosol retrieval, using 2008 data. While both methods reduced the overall AOD offset over land from 0.02 to 0.01, neither significantly reduced the AOD offset over ocean. The overall negative AE offset was reduced. A Collection (C6.1) of all MODIS-atmosphere products was released, but we expect that the C6.1 aerosol products will maintain similar overall AOD and AE offsets. We conclude that: a) users should not interpret global differences between Terra and Aqua aerosol products as representing a true diurnal signal in the aerosol. b) Because the MODIS-A product appears to have overall smaller bias compared to ground-truth, it may be more suitable for some applications, however c) since the AOD offset is only ~0.02 and within noise level for single retrievals, both MODIS products may be adequate for most applications.

Monitoring temporal–spatial variations of AOD over the Yangtze River Delta, China

Aerosol can induce visibility reduction, affect radiation balance and modify cloud property on the environmental effect, and show the harmful effects on human health. Insight of aerosol becomes an integral task in the process of control measures for environmental pollution. The present study provided an analysis of temporal–spatial variations of aerosol optical depth (AOD) using the MOD04 level-2 in collection 6 (C6) with the deep blue retrieval algorithm from January 2005 to December 2015 over Yangtze River Delta (YRD) in China. The AOD validations between MODIS and Aerosol Robotic Network (AERONET) were estimated by the methods of regression, correlation. Then, the periodic features and trends of AOD and angstrom exponent (AE) were explored with the wavelet transformation (WT) procedure. Further, the variations of AOD and AE spatial distribution on multi-time scales (annual, monthly and season) were demonstrated. Meantime, the sources of AOD are discussed. It was found that the daily AOD from MODIS has a strong correlation relationship (slope = 0.9838, r = 0.84) with AERONET over YRD. The variations of both AOD and AE on time series have been distinct temporal periodic (12, 6 and 4 months) characteristics, and show the decreasing trends on annual and semi-annual periods. On annual, the AOD on spatial distribution is slowly declining from the northwest towards the southeast, and the AE on spatial distribution is gradually decreasing from the northwest to the southeast and from the land to the coast. The variations both inter-annual AOD and AE on spatial distribution show the inverse trends, respectively. On monthly, the means of AOD range from minimum 0.46 in January to maximum 0.90 in July, and the variations of spatial distribution mainly occur in the north parts of Yangtze River and some scattered areas with high terrain and south coast. The means of AE range from minimum 1.13 in October to maximum 1.58 in April, and the variations of spatial distribution are mainly found in the south of Henan, the north of Jiangsu, the coast belt and the riverside of Yangtze River and the high terrain regions. On seasonality, the means of AOD reaches its maximum 0.68 in summer and minimum 0.50 in winter, and the variations of spatial distribution mainly occur in the coast belt, the north parts of Hongze Lake and the south parts with high terrain. The means of AE reaches its maximum 1.48 in spring and minimum 1.25 in autumn, and the variations of spatial distribution were shown the similarity with that of monthly.

Aerosol Optical Depth Retrieval From Landsat 8 OLI Images Over Urban Areas Supported by MODIS BRDF/Albedo Data

This letter presents a new algorithm that allows the retrieval of the aerosol optical depth (AOD) at a high (500 m) spatial resolution from Landsat 8 Operational Land Imager (OLI) data over urban areas. Because of the complex structure over urban surfaces, the bidirectional reflectance characteristic is obvious; however, most of the current aerosol retrieval algorithms over land do not account for the anisotropic effect of the surface. This letter improves the quality of AOD retrieval by providing the surface reflectance based on the multiyear MODIS bidirectional reflectance distribution function (BRDF)/Albedo model parameters product (MCD43A1) and the RossThick-LiSparse reciprocal kernel-driven BRDF model. The ground-based Aerosol Robotic Network (AERONET) AOD measurements from five sites located in urban and suburban areas are used to validate the AOD retrievals, and the MODIS Terra Collection 6 (C6) dark target/deep blue AOD products (MOD04) at 10-km spatial resolution are obtained for comparison. The validation results show that the AOD retrievals from the OLI images are well correlated with the AERONET AOD measurements ( $R = 0.987$ ), with a low root-mean-square error of 0.07, a mean absolute error of 0.036, and a relative mean bias of 1.029; approximately 95.3% of the collocations fall within the expected error. The analysis indicates that the BRDF is essential in ensuring the accuracy of AOD retrieval. Compared with the MOD04 AOD retrievals, the OLI AOD retrievals have better spatial continuity and higher accuracy. The new algorithm can provide continuous and detailed spatial distributions of the AOD over complex urban surfaces.

Calibration and validation of the Australian fractional cover product for MODIS collection 6

ABSTRACTFractional cover of photosynthetic vegetation (FPV), non-photosynthetic vegetation (FNPV) and bare soil (FBS) is an important input for assessment of the productivity of global pastures and rangelands. Here we describe the updating of this product using the new Moderate Resolution Imaging Spectroradiometer (MODIS) Nadir BRDF-Adjusted Reflectance (NBAR) Collection 6 reflectance product (C6) and a major expansion of the field calibration database. Fractional cover based on the C6 input exhibited reduced bias and root mean square error compared with the Collection 5 (C5) product. The expanded calibration database with more sites in arid areas provided greater separation between reflectance values of end-members for FNPV and FBS. Specific site variations in FNPV and FBS in arid areas could be traced to small but consistent changes in blue and green band, and occasional changes in short wave infrared reflectance in C6 when compared to C5. The recalibration described here provides an Australian fractional cover product with reduced uncertainty and improves the basis for a prototype global product for use in modelling of rangeland and pasture productivity.