Coli Surface Research Articles

Genetically engineered whole-cell biocatalyst for efficient CO2 capture by cell surface display of carbonic anhydrase from Bacillus cereus GLRT202 on Escherichia coli

CO2 sequestration is important for reducing greenhouse effects. Carbonic anhydrase (CA) from bacteria has a promising role because it can be modified by genetic techniques and bioengineering. In this study, the CA from B. cereus GLRT202 (Bc-CA) was genetically engineered and anchored on the surface of E. coli by using the N-domain of the ice nucleation protein from P. syringae (INPN). Both surface-displayed and cytosolic Bc-CA yielded high expression levels of CA when induced with 0.5 mM IPTG. It exhibited no adverse influence on the host cell growth. Additionally, surface-displayed Bc-CA enhanced its stability and specificity compared to cytosolic expressed Bc-CA. The CA activity of whole-cell surface-displayed cells was 1.66-fold higher (5.19 U/mL) than that of the cytosolic form. Besides the advantages of higher activity, the whole-cell displaying CA was comparatively stable, with better storage (at 4 ℃) and resting culture stability (at 37 ℃). The whole-cell biocatalyst induced the calcite precipitation, which indicated that the cell facilitated the CO2 capture. XRD, FTIR, and FESEM characterized calcite precipitates thus obtained. This study demonstrates that Bc-CA can be correctly expressed on the E. coli surface through fusion with the INPN. This leads to an effective whole-cell biocatalyst with enhanced stability and specificity of the enzyme for efficient CO2 capture applications.

Biosilica-coated carbonic anhydrase displayed on Escherichia coli: A novel design approach for efficient and stable biocatalyst for CO2 sequestration

A robust and stable carbonic anhydrase (CA) system is indispensable for effectively sequestering carbon dioxide to mitigate climate change. While microbial surface display technology has been employed to construct an economically promising cell-displayed CO2-capturing biocatalyst, the displayed CA enzymes were prone to inactivation due to their low stability in harsh conditions. Herein, drawing inspiration from biomineralized diatom frustules, we artificially introduced biosilica shell materials to the CA macromolecules displayed on Escherichia coli surfaces. Specifically, we displayed a fusion of CA and the diatom-derived silica-forming Sil3K peptide (CA-Sil3K) on the E. coli surface using the membrane anchor protein Lpp-OmpA linker. The displayed CA-Sil3K (dCA-Sil3K) fusion protein underwent a biosilicification reaction under mild conditions, resulting in nanoscale self-encapsulation of the displayed enzyme in biosilica. The biosilicified dCA-Sil3K (BS-dCA-Sil3K) exhibited improved thermal, pH, and protease stability and retained 63 % of its initial activity after ten reuses. Additionally, the BS-dCA-Sil3K biocatalyst significantly accelerated the CaCO3 precipitation rate, reducing the time required for the onset of CaCO3 formation by 92 % compared to an uncatalyzed reaction. Sedimentation of BS-dCA-Sil3K on a membrane filter demonstrated a reliable CO2 hydration application with superior long-term stability under desiccation conditions. This study may open new avenues for the nanoscale-encapsulation of enzymes with biosilica, offering effective strategies to provide efficient, stable, and economic cell-displayed biocatalysts for practical applications.

E. Coli inactivation by humidified air barrier discharge plasmas and the chemical stability of amino acids

In this study, we use atmospheric air dielectric barrier discharge (DBD) plasma to inactivate E. coli (E. coli) by changing the air humidity levels. In order to analyze the inactivation process of E. coli during the humidified air DBD plasma treatment, we analyze the byproducts of 12 representational amino acids and compare their chemical stability. The experimental results show that the E. coli surface density (CFU cm−2) on a steel disc decreased significantly when the air humidity was increased from 20% to 60%, and humidified air DBD plasma at 60% humidity is very effective in inactivating E. coli. A consistently potent deactivation effect on E. coli can be seen in plasma afterglow treatment experiments over a storage time of two minutes, indicating that plasma-activated long-lived reactive oxygen and nitrogen species play a crucial role in controlling the E. coli inactivation. Compared to the low humidity (20%) condition, the concentration of reactive species produced by the plasma at high humidity (60%) increased 2-fold for 2-hydroxyterephthalic acid and 5-fold for hydrogen peroxide while ozone production was halved. Amino acid experiments showed that amino acids may be oxidized, hydroxylated and nitroxylated by reactive species. The reduction of amino acids by air DBD plasma was even more pronounced at high air humidity compared to low air humidity. Our analysis indicates that the significant inactivation of E. coli by humified air DBD plasma is related to the chemical instability of amino acids.

Human super antibody to viral RNA-dependent RNA polymerase produced by a modified Sortase self-cleave-bacteria surface display system

BackgroundRNA-dependent RNA polymerase (RdRp) is a good target of anti-RNA virus agents; not only it is pivotal for the RNA virus replication cycle and highly conserved among RNA viruses across different families, but also lacks human homolog. Recently, human single-chain antibody (HuscFv) that bound to thumb domain of hepatitis C virus (HCV) RNA-dependent RNA polymerase (functionalized NS5B protein) was produced and engineered into cell-penetrating antibody (super antibody) in the form of cell-penetrating peptide (penetratin, PEN)-linked HuscFv (PEN-HuscFv34). The super antibody was produced and purified from inclusion body (IB) of a pen-huscfv34-vector-transformed Escherichia coli. The super antibody inhibited replication of alpha- and beta- coronaviruses, flaviviruses, and picornaviruses that were tested (broadly effective); thus, it has high potential for developing further towards a pan-anti-RNA virus agent. However, production, purification, and refolding of the super antibody molecules from the bacterial IB are laborious and hurdles to large-scale production. Therefore, in this study, Sortase-self-cleave method and bacteria surface display system were combined and modified for the super antibody production.Methods and resultsBL21 (DE3) ΔA E. coli, a strain lacking predominant outer membrane protein (OmpA) and ion and OmpT proteases, that displayed a membrane-anchored fusion protein, i.e., chimeric lipoprotein (Lpp′)-OmpA′, SUMO, Sortase protease, Sortase cleavage site (LPET↓G) and PEN-HuscFv34-6× His was generated. The soluble PEN-HuscFv34-6× His with glycine at the N-terminus could be released from the E. coli surface, simply by incubating the bacterial cells in a Sortase-cleavage buffer. After centrifugation, the G-PEN-HuscFv34-6× His could be purified from the supernatant. The purified G-PEN-HuscFv34-6× retained original cell-penetrating ability (being super antibody) and the broadly effective anti-RNA virus activity of the original IB-derived-PEN-HuscFv34.ConclusionThe functionalized super antibody to RNA virus RdRp was successfully produced by using combined Sortase self-cleave and bacterial surface display systems with modification. The display system is suitable for downstream processing in a large-scale production of the super antibody. It is applicable also for production of other recombinant proteins in soluble free-folding form.

Protein-based vaccine candidate MecVax broadly protects against enterotoxigenic Escherichia coli intestinal colonization in a rabbit model.

There are no vaccines licensed against enterotoxigenic Escherichia coli (ETEC), a leading cause of children's diarrhea and the most common cause of travelers' diarrhea. Multivalent vaccine candidate MecVax unprecedentedly targets two ETEC enterotoxins (heat-stable toxin, STa; heat-labile toxin, LT) and the seven most prevalent ETEC adhesins (colonization factor antigen, CFA/I, coli surface antigens, CS1-CS6) and has been demonstrated preclinically to protect against STa- and LT-mediated ETEC clinical diarrhea and prevent intestinal colonization from ETEC strain H10407 (CFA/I, STa, LT). However, it is unattested whether MecVax broadly protects against intestinal colonization from ETEC strains producing the other six adhesins (CS1-CS6) also targeted by this product. In this study, we immunized rabbits with MecVax and challenged them with heterogeneous ETEC strains that express CS1-CS6 adhesins to evaluate MecVax's efficacy against bacterial intestinal colonization, thus providing broad vaccine protection against ETEC infection. Data revealed that rabbits intramuscularly immunized with MecVax developed robust responses to both ETEC enterotoxins (STa, LT) and seven adhesins (CFA/I, CS1-CS6), and when challenged with ETEC isolates expressing CS1/CS3, CS2/CS3, CS4/CS6, CS5/CS6, or CS6 adhesin, the immunized rabbits prevented over two logs (>99%) of bacteria from colonization in small intestines. Additionally, compared to a CFA-toxoid fusion protein, which is another potential ETEC vaccine antigen to target two ETEC enterotoxins and the seven adhesins, MecVax exhibited better protection against ETEC intestinal colonization. These results, in conjunction with the protection data from early studies, evidenced that MecVax is broadly protective, validating MecVax's candidacy as an effective vaccine against ETEC-associated diarrhea and accelerating ETEC vaccine development.

Spatial organisation of the E. coli outer membrane from multiscale computer simulations.

The cell envelope that surrounds Gram-negative bacteria is composed of two membranes (the inner and outer) which are separated by an aqueous region known as the periplasm. Together these three regions provide the bacterium with a formidable defence against unwanted incoming molecules, including antibiotics. The outer membrane contains a range of beta-barrel proteins of varying sizes and functions and in terms of its lipidic composition, it has lipopolysaccharides (LPS) in the outer leaflet and phospholipids in the inner leaflet. We are using multiscale simulations in combination with the experimental work (including native mass spectrometry, cross-linking studies and AFM) of our colleagues to develop a picture of the spatial organisation of the outer membrane of E. coli. Our work has shown that outer membrane proteins (OMPs) are not uniformly distributed throughout the membrane but occupy high protein density regions or ‘OMP islands’. These islands are separated by regions of high LPS (upper leaflet) and phospholipid (lower leaflet), in which there are hardly any proteins. We provide details of our current view of the organisation of OMP islands and briefly describe how this is being incorporated into our efforts to study antimicrobial penetration into the outer membrane. We also discuss the advancements in our computational models that are enabling us to expand the scope of our studies to larger systems by using ultra coarse-grained approaches. Overall, our studies are now revealing a very different picture of the E. coli surface than the one presented in textbooks.

Outer Membrane Porin F in E. coli Is Critical for Effective Predation by Bdellovibrio.

Bdellovibrio and like organisms (BALOs) are a unique bacterial group that live by predating on other bacteria, consuming them from within to grow and replicate before the progeny come out to complete the life cycle. The mechanisms by which these predators recognize their prey and differentiate them from nonprey bacteria, however, are still not clear. Through genetic knockout and complementation studies in different Escherichia coli strains, we found that Bdellovibrio bacteriovorus strain 109J recognizes outer membrane porin F (OmpF) on the E. coli surface and that the activity of the E. coli EnvZ-OmpR regulatory system significantly impacts predation kinetics. OmpF is not the only signal by which BALOs recognize their prey, however, as B. bacteriovorus could eventually predate on the E. coli ΔompF mutant after prolonged incubation. Furthermore, recognizing OmpF as a prey surface structure was dependent on the prey strain, as knocking out OmpF protein homologues in other prey species, including Escherichia fergusonii, Klebsiella pneumoniae, and Salmonella enterica, did not always reduce the predation rate. Consequently, although OmpF was found to be an important surface component used by Bdellovibrio to efficiently recognize and attack E. coli, future work is needed to determine what other prey surface structures are recognized by these predators. IMPORTANCE Bdellovibrio bacteriovorus and like organisms (BALOs) are Gram-negative predatory bacteria that attack other Gram-negative bacteria by penetrating their periplasm and consuming them from within to obtain the nutrients necessary for the predator's growth and replication. How these predators recognize their prey, however, has remained a mystery. Here, we show that the outer membrane porin F (OmpF) in E. coli is recognized by B. bacteriovorus strain 109J and that the loss of this protein leads to severely delayed predation. However, predation of several other prey species was not dependent on the recognition of this protein or its homologues, indicating that there are other structures recognized by the predators on the prey surface that are yet to be discovered.

Sequence variations in the ETEC CS6 operon affect transcript and protein expression

ABSTRACT Enterotoxigenic Escherichia coli (ETEC) is a leading cause of diarrheal disease in developing nations where it accounts for a significant disease burden in children between the ages of 0 to 59 months. It is also the number one bacterial causative agent of traveler’s diarrhea. ETEC infects hosts through the fecal-oral route and utilizes colonization factors (CF) to adhere within the small intestine. Over 25 CFs have been identified; 7 are considered major CFs and a vaccine targeting these is predicted to provide protection against up to 66% of ETEC associated disease. Coli Surface Antigen 6 (CS6) is a major CF and is associated with disease-causing ETEC isolates. Analysis of the CS6 operon sequence led to the identification of two regions of variability among clinical isolates which we predicted exert effects on CS6 transcript and protein expression. A total of 7 recombinant E. coli strains were engineered to encode the CS6 operon in wild-type, hybrid, and mutant configurations. Western blot analysis and RT-qPCR provided evidence to support the importance of an intergenic hairpin structure on CS6 expression. Our results reveal the significance of CS6 sequence selection regarding ETEC vaccine development and present novel information regarding CS6 sequence variation in WT ETEC strains.

Cell surface display of Neurospora crassa glutamate decarboxylase on Escherichia coli for extracellular Gamma-aminobutyric acid production from high cell density culture

GABA is produced from the decarboxylation of glutamate by glutamate decarboxylase enzyme (GadB). Various hetrologous GadB enzymes has been indentified and introduced in Escherichia coli to improve the productivity of GABA. In this study, cell surface display strategy was employed by displaying Neurospora crassa glutamate decarboxylase (GadB) on the surface of Escherichia coli using OmpC as an anchoring motif. To construct the display system, the GadB was fused to truncated C-terminus of OmpC and expressed in E. coli. The recombinant E. coli displaying GadB has produced 3.03 g/L of GABA from 10 g/L glutamate within 12 h of culture period. When the GadB display system was cultured at high cell density, 100% GABA yeild was achieved from 50 g/L of glutamate. The results suggest that the GadB expression on the E. coli surface is stable and effective on GABA production. The surface display strategy can be applied on other potential enzyme candidates and used in Industry for bulk chemical production.

Bacteria-Mediated Tumor Therapy via Photothermally-Programmed Cytolysin A Expression.

By leveraging the ability of bacteria to express therapeutic protein cytolysin A (ClyA) through plasmid transformation, a thermally-activated biohybrid (TAB@Au) is constructed by biomineralizing gold nanoparticles (AuNPs) on the E. coli surface. Due to the feature of anaerobic bacteria homing to tumor microenvironments, the bacteria-based antitumor vehicles can be efficaciously accumulated at tumor sites. Under NIR laser irradiation, the biomineralized AuNPs harvest transdermal photons and convert them into local heat for photothermal therapy. After that, the produced heat elicits the expression of ClyA for killing tumor cells. In vitro and in vivo experiments verify the conception that the current therapeutic modality greatly inhibits the proliferation of tumor cells. In terms of the spatial specificity and non-invasiveness of NIR laser, the bacteria-based phototherapy represents an appealing way for tumor therapy.

Safety and immunogenicity of intramuscularly administered CS6 subunit vaccine with a modified heat-labile enterotoxin from enterotoxigenic Escherichia coli

IntroductionEnterotoxigenic Escherichia coli (ETEC) is a common cause of infectious diarrhoea and a leading cause of morbidity and mortality in children living in resource-limited settings. It is also the leading cause of travellers’ diarrhoea among civilian and military travellers. Its dual importance in global public health and travel medicine highlights the need for an effective vaccine. ETEC express colonization factors (CFs) that mediate adherence to the small intestine. An epidemiologically prevalent CF is coli surface antigen 6 (CS6). We assessed the safety and immunogenicity of a CS6-targeted candidate vaccine, CssBA, co-administered intramuscularly with the double-mutant heat-labile enterotoxin, dmLT [LT(R192G/L211A)]. MethodsThis was an open-label trial. Fifty subjects received three intramuscular injections (Days 1, 22 and 43) of CssBA alone (5 µg), dmLT alone (0.1 µg) or CssBA (5, 15, 45 µg) + dmLT (0.1 and 0.5 µg). Subjects were actively monitored for adverse events for 28 days following the third vaccination. Antibody responses (IgG and IgA) were characterized in the serum and from lymphocyte supernatants (ALS) to CS6 and the native ETEC heat labile enterotoxin, LT. ResultsAcross all dose cohorts, the vaccine was safe and well-tolerated with no vaccine-related severe or serious adverse events. Among vaccine-related adverse events, a majority (98%) were mild with 79% being short-lived vaccine site reactions. Robust antibody responses were induced in a dose-dependent manner with a clear dmLT adjuvant effect. Response rates in subjects receiving 45 µg CssBA and 0.5 µg dmLT ranged from 50 to 100% across assays. ConclusionThis is the first study to demonstrate the safety and immunogenicity of CssBA and/or dmLT administered intramuscularly. Co-administration of the two components induced robust immune responses to CS6 and LT, paving the way for future studies to evaluate the efficacy of this vaccine target and development of a multivalent, subunit ETEC vaccine.

Directed Evolution of a Surface-Displayed Artificial Allylic Deallylase Relying on a GFP Reporter Protein.

Artificial metalloenzymes (ArMs) combine characteristics of both homogeneous catalysts and enzymes. Merging abiotic and biotic features allows for the implementation of new-to-nature reactions in living organisms. Here, we present the directed evolution of an artificial metalloenzyme based on Escherichia coli surface-displayed streptavidin (SavSD hereafter). Through the binding of a ruthenium-pianostool cofactor to SavSD, an artificial allylic deallylase (ADAse hereafter) is assembled, which displays catalytic activity toward the deprotection of alloc-protected 3-hydroxyaniline. The uncaged aminophenol acts as a gene switch and triggers the overexpression of a fluorescent green fluorescent protein (GFP) reporter protein. This straightforward readout of ADAse activity allowed the simultaneous saturation mutagenesis of two amino acid residues in Sav near the ruthenium cofactor, expediting the screening of 2762 individual clones. A 1.7-fold increase of in vivo activity was observed for SavSD S112T-K121G compared to the wild-type SavSD (wt-SavSD). Finally, the best performing Sav isoforms were purified and tested in vitro (SavPP hereafter). For SavPP S112M-K121A, a total turnover number of 372 was achieved, corresponding to a 5.9-fold increase vs wt-SavPP. To analyze the marked difference in activity observed between the surface-displayed and purified ArMs, the oligomeric state of SavSD was determined. For this purpose, crosslinking experiments of E. coli cells overexpressing SavSD were carried out, followed by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) and Western blot. The data suggest that SavSD is most likely displayed as a monomer on the surface of E. coli. We hypothesize that the difference between the in vivo and in vitro screening results may reflect the difference in the oligomeric state of SavSD vs soluble SavPP (monomeric vs tetrameric). Accordingly, care should be applied when evolving oligomeric proteins using E. coli surface display.

Evaluation of the immunogenicity and protective efficacy of a recombinant CS6-based ETEC vaccine in an Aotus nancymaae CS6 + ETEC challenge model

Colonization factors or Coli surface antigens (CFs or CS) are important virulence factors of Enterotoxigenic E. coli (ETEC) that mediate intestinal colonization and accordingly are targets of vaccine development efforts. CS6 is a highly prevalent CF associated with symptomatic ETEC infection both in endemic populations and amongst travelers. In this study, we used an Aotus nancymaae non-human primate ETEC challenge model with a CS6 + ETEC strain, B7A, to test the immunogenicity and protective efficacy (PE) of a recombinant CS6-based subunit vaccine. Specifically, we determined the ability of dscCssBA, the donor strand complemented recombinant stabilized fusion of the two subunits of the CS6 fimbriae, CssA and CssB, to elicit protection against CS6 + ETEC mediated diarrhea when given intradermally (ID) with the genetically attenuated double mutant heat-labile enterotoxin LT(R192G/L211A) (dmLT). ID vaccination with dscCssBA + dmLT induced strong serum antibody responses against CS6 and LT. Importantly, vaccination with dscCssBA + dmLT resulted in no observed diarrheal disease (PE = 100%, p = 0.03) following B7A challenge as compared to PBS immunized animals, with an attack rate of 62.5%. These data demonstrate the potential role that CS6 may play in ETEC infection and that recombinant dscCssBA antigen can provide protection against challenge with the homologous CS6 + ETEC strain, B7A, in the Aotus nancymaae diarrheal challenge model. Combined, these data indicate that CS6, and more specifically, a recombinant engineered derivative should be considered for further clinical development.

Biological efficacy of perpendicular type-I collagen protruded from TiO2-nanotubes

The aim of this study was to evaluate the biological efficacy of a unique perpendicular protrusion of type-I collagen (Col-I) from TiO2 nanotubes (NT-EPF surface). We hypothesized that the NT-EPF surface would play bifunctional roles in stimulating platelet-mediated fibroblast recruitment and anchoring fibroblast-derived Col-I to form a perpendicular collagen assembly, mimicking the connective tissue attachment around natural teeth for the long-term maintenance of dental implants. Ti surface modification was accomplished in two steps. First, TiO2 nanotubes (NT) array was fabricated via anodization. Diameters and depths of NTs were controlled by applied voltage and duration. Subsequently, an electrophoretic fusion (EPF) method was applied to fuse Col-I into nanotube arrays in a perpendicular fashion. Surface wettability was assessed by contact angle measurement. The bioactivity of modified TiO2 surfaces was evaluated in terms of NIH3T3 fibroblast attachment, platelet activation, and collagen extension. Early attachment, aggregation, and activation of platelets as well as release of platelet-related growth factors were demonstrated on NT-EPF surfaces. Platelet-mediated NIH3T3 cells migration toward NT-EPF was significantly increased and the attached cells showed a typical fibrous morphology with elongated spindle shape. A direct linkage between pseudopod-like processes of fibroblasts to NT-EPF surfaces was observed. Furthermore, the engineered EPF collagen protrusion linked with cell-derived collagen in a perpendicular fashion. Within the limitation of this in vitro study, the TiO2 nanotube with perpendicular Col-I surface (NT-EPF) promoted better cell attachment, induced a strong platelet activation which suggested the ability to create a more robust soft tissue seal.

Cross-Reactivity, Epitope Mapping, and Potency of Monoclonal Antibodies to Class 5 Fimbrial Tip Adhesins of Enterotoxigenic Escherichia coli.

Enterotoxigenic Escherichia coli (ETEC) is a leading diarrheagenic bacterial pathogen among travelers and children in resource-limited regions. Adherence to host intestinal cells mediated by ETEC fimbriae is believed to be a critical first step in ETEC pathogenesis. These fimbriae are categorized into related classes based on sequence similarity, with members of the class 5 fimbrial family being the best characterized. The eight related members of the ETEC class 5 fimbrial family are subdivided into three subclasses (5a, 5b, and 5c) that share similar structural arrangements, including a fimbrial tip adhesin. However, sequence variability among the class 5 adhesins may hinder the generation of cross-protective antibodies. To better understand functional epitopes of the class 5 adhesins and their ability to induce intraclass antibody responses, we produced 28 antiadhesin monoclonal antibodies (MAbs) to representative adhesins CfaE, CsbD, and CotD, respectively. We determined the MAb cross-reactivities, localized the epitopes, and measured functional activities as potency in inhibition of hemagglutination induced by class 5 fimbria-bearing ETEC. The MAbs' reactivities to a panel of class 5 adhesins in enzyme-linked immunosorbent assays (ELISAs) revealed several reactivity patterns, including individual adhesin specificity, intrasubclass specificity, intersubclass specificity, and class-wide cross-reactivity, suggesting that some conserved epitopes, including two conserved arginines, are shared by the class 5 adhesins. However, the cross-reactive MAbs had functional activities limited to strains expressing colonization factor antigen I (CFA/I), coli surface antigen 17 (CS17), or CS1, suggesting that the breadth of functional activities of the MAbs was more restricted than the repertoire of cross-reactivities measured by ELISA. The results imply that multivalent adhesin-based ETEC vaccines or prophylactics need more than one active component to reach broad protection.

Molecular dynamics simulation and experimental study of the surface-display of SPA protein via Lpp-OmpA system for screening of IgG

Staphylococcal protein A (SpA) is a major virulence factor of Staphylococcus aureus. S. aureus is able to escape detection by the immune system by the surface display of protein A. The SpA protein is broadly used to purify immunoglobulin G (IgG) antibodies. This study investigates the fusion ability of Lpp′-OmpA (46–159) to anchor and display five replicate domains of protein A with 295 residues length (SpA295) of S. aureus on the surface of Escherichia coli to develop a novel bioadsorbent. First, the binding between Lpp’-OmpA-SPA295 and IgGFc and the three-dimensional structure was investigated using molecular dynamics simulation. Then high IgG recovery from human serum by the surface-displayed system of Lpp′-OmpA-SPA295 performed experimentally. In silico analysis was demonstrated the binding potential of SPA295 to IgG after expression on LPP-OmpA surface. Surface-engineered E. coli displaying SpA protein and IgG-binding assay with SDS-PAGE analysis exhibited high potential of the expressed complex on the E. coli surface for IgG capture from human serum which is applicable to conventional immune precipitation.

Virulence Profiles of Diarrheagenic <i>Escherichia coli</i> Isolated from the Western Region of Ghana

Diarrheagenic Escherichia coli (DEC), an important agent of infectious diarrhea, is constantly evolving, making its periodic monitoring necessary. However, the DEC genotypes in Ghana remain uncharacterized. We focused on characterizing the molecular serotypes, virulence factors, multilocus sequence types, and the phylogenetic relatedness among different DEC pathotypes recovered from stool samples of pediatric patients with symptoms of diarrhea from the Western region of Ghana. We detected all five common DEC pathotypes, with the majority of the isolates being enterotoxigenic E. coli (ETEC) harboring the heat-labile enterotoxin gene. The DEC strains exhibited diverse serotypic identity with novel and previously reported outbreak strains. Sequence types (ST) ST38, ST316, and ST1722 were most prevalent, and clonal complex 10 (CC10) was the most common CC. A close evolutionary distance was observed among most of the isolates. Coli surface antigen 6 was the most prevalent (44%, n = 11) ETEC-specific colonization factor. Nearly all the isolates harbored lpfA, and the frequencies of other virulence genes such as pap and cnf1 were 7.9% and 18.4%, respectively. This study provides insights into the important and novel genotypes circulating in the Western region of Ghana that should be monitored for public health.

Anti-Escherichia coli Functionalized Silver-Doped Carbon Nanofibers for Capture of E. coli in Microfluidic Systems.

Silver-doped carbon nanofibers (SDCNF) are used as the base material for the selective capture of Escherichia coli in microfluidic systems. Fibers were spun in a glovebox with dry atmosphere maintained by forced dry air pumped through the closed environment. This affected the evaporation rate of the solvent during the electrospinning process and the distribution of silver particles within the fiber. Antibodies are immobilized on the surface of the silver-doped polyacrylonitrile (PAN) based carbon nanofibers via a three-step process. The negatively charged silver particles present on the surface of the nanofibers provide suitable sites for positively charged biotinylated poly-(L)-lysine-graft-poly-ethylene-glycol (PLL-g-PEG biotin) conjugate attachment. Streptavidin and a biotinylated anti-E. coli antibody were then added to create anti-E. coli surface functionalized (AESF) nanofibers. Functionalized fibers were able to immobilize up to 130 times the amount of E. coli on the fiber surface compared to neat silver doped fibers. Confocal images show E. coli remains immobilized on fiber mat surface after extensive rinsing showing the bacteria is not simply a result of non-specific binding. To demonstrate selectivity and functionalization with both gram negative and gram-positive antibodies, anti-Staphylococcus aureus surface functionalized (ASSF) nanofibers were also prepared. Experiments with AESF performed with Staphylococcus aureus (S. aureus) and ASSF with E. coli show negligible binding to the fiber surface showing the selectivity of the functionalized membranes. This surface functionalization can be done with a variety of antibodies for tunable selective pathogen capture.

Novel Bacterial Surface Display System Based on the Escherichia coli Protein MipA.

Bacterial surface display systems have been developed for various applications in biotechnology and industry. Particularly, the discovery and design of anchoring motifs is highly important for the successful display of a target protein or peptide on the surface of bacteria. In this study, an efficient display system on Escherichia coli was developed using novel anchoring motifs designed from the E. coli mipA gene. Using the C-terminal fusion system of an industrial enzyme, Pseudomonas fluorescens lipase, six possible fusion sites, V140, V176, K179, V226, V232, and K234, which were truncated from the C-terminal end of the mipA gene (MV140, MV176, MV179, MV226, MV232, and MV234) were examined. The whole-cell lipase activities showed that MV140 was the best among the six anchoring motifs. Furthermore, the lipase activity obtained using MV140 as the anchoring motif was approximately 20-fold higher than that of the previous anchoring motifs FadL and OprF but slightly higher than that of YiaTR232. Western blotting and confocal microscopy further confirmed the localization of the fusion lipase displayed on the E. coli surface using the truncated MV140. Additionally the MV140 motif could be used for successfully displaying another industrial enzyme, α-amylase from Bacillus subtilis. These results showed that the fusion proteins using the MV140 motif had notably high enzyme activities and did not exert any adverse effects on either cell growth or outer membrane integrity. Thus, this study shows that MipA can be used as a novel anchoring motif for more efficient bacterial surface display in the biotechnological and industrial fields.

Synergistic mode of action of catechin, vanillic and protocatechuic acids to inhibit the adhesion of uropathogenic Escherichia coli on silicone surfaces.

To study the individual and combined contribution of catechin, protocatechuic and vanillic acids to inhibit the adhesion of uropathogenic Escherichia coli (UPEC) on the surface of silicone catheters. The adhesion of UPEC to silicone catheters during the exposure to nonlethal concentrations of phenolic compounds was measured, as well as changes in motility, presence of fimbriae, extra-cellular polymeric substances, surface charge, hydrophobicity and membrane fluidity. The phenolic combination reduced 26-51% of motility, 1 log CFU per cm2 of adhered bacteria and 20-40% the carbohydrate and protein content in the biofilm matrix. Curli fimbriae, surface charge and cell hydrophobicity were affected to a greater extent by the phenolic combination. In the mixture, vanillic acid was the most effective for reducing bacterial adhesion, extra-polymeric substance production, motility, curli fimbriae and biofilm structure. Notwithstanding, protocatechuic acid caused major changes in the bacterial cell surface properties, whereas catechin affected the cell membrane functionality. Catechin, protocatechuic and vanillic acids have different bacterial cell targets, explaining the synergistic effect of their combination against uropathogenic E. coli. This study shows the contribution of catechin, protocatechuic and vanillic acids in producing a synergistic mixture against the adhesion of uropathogenic E. coli on silicone catheters. The action of catechin, vanillic and protocatechuic acids included specific contributions of each compound against the E. coli membrane's integrity, motility, surface properties and production of extracellular polymeric substances. Therefore, the studied mixture of phenolic compounds could be used as an antibiotic alternative to reduce urinary tract infections associated with silicone catheters.