Cold State Research Articles

Cancer cell-selective induction of mitochondrial stress and immunogenic cell death by PT-112 in human prostate cell lines

PT-112 is a novel immunogenic cell death (ICD)-inducing small molecule currently under Phase 2 clinical development, including in metastatic castration-resistant prostate cancer (mCRPC), an immunologically cold and heterogeneous disease state in need of novel therapeutic approaches. PT-112 has been shown to cause ribosome biogenesis inhibition and organelle stress followed by ICD in cancer cells, culminating in anticancer immunity. In addition, clinical evidence of PT-112-driven immune effects has been observed in patient immunoprofiling. Given the unmet need for immune-based therapies in prostate cancer, along with a Phase I study (NCT#02266745) showing PT-112 activity in mCRPC patients, we investigated PT-112 effects in a panel of human prostate cancer cell lines. PT-112 demonstrated cancer cell selectivity, inhibiting cell growth and leading to cell death in prostate cancer cells without affecting the non-tumorigenic epithelial prostate cell line RWPE-1 at the concentrations tested. PT-112 also caused caspase-3 activation, as well as stress features in mitochondria including ROS generation, compromised membrane integrity, altered respiration, and morphological changes. Moreover, PT-112 induced damage-associated molecular pattern (DAMP) release, the first demonstration of ICD in human cancer cell lines, in addition to autophagy initiation across the panel. Taken together, PT-112 caused selective stress, growth inhibition and death in human prostate cancer cell lines. Our data provide additional insight into mitochondrial stress and ICD in response to PT-112. PT-112 anticancer immunogenicity could have clinical applications and is currently under investigation in a Phase 2 mCRPC study.

Study in the Extreme UV Range of the Spectral Transmission of Nickel Plasma Created under the Effect of an X-Ray Pulse of the Z-Pinch

Spectral properties of the high-temperature plasma obtained by exposing a nickel layer to a source of high-power X-ray radiation (a power of 6–10 TW with a duration of 7–10 ns) based on a Z-pinch, formed during implosion of tungsten multi-wire arrays at the Angara-5-1 facility, are studied. In this case, the Z-pinch radiation heats the target and turns it into the hot plasma, and the same radiation probes the target plasma to determine the spectral dependence of the transmission of this plasma. An original scheme is proposed for measuring the incident, transmitted and self-emission of a target simultaneously in one experiment in the frame mode using a grazing incidence diffraction spectrograph. Using laser shadow imaging, experimental data are obtained on the velocity of the plasma expansion on the irradiated and back sides of the target, which reached 100 km/s. Targets made of thin Ni layers deposited on a mylar film are studied. An irradiationinduced multiple increase in the transmission of the target plasma in the EUV range is observed compared to the transmittance of the target in the cold state. The dependence of the absorption spectrum of the plasma and the accompanying self-radiation of the target on the power and shape of the heating pulse is studied. The measurement results are compared with numerical calculations performed using the RALEF-2D two-dimensional radiation code, which has been repeatedly used previously to simulate similar experiments. The shape of the spectral dependence of the transmission in the experiment and calculation is similar in the range of ∼30–200 Å, but the model plasma transmission (∼0.8–0.9) is higher than that obtained using a spectrograph and X-ray multi-frame photography (∼0.5–0.6).

Experimental evaluations of Berkeley thermal sensation and comfort models in electric vehicle cabin under cold outdoor conditions

As the automobile industry is transitioning toward electric vehicles, manufacturers have started implementing local warmers alongside cabin heating, ventilation, and air conditioning (HVAC) systems for effective thermal comfort management. However, optimal operating strategies need to be developed for integrating local warmers with HVAC systems. Although the Berkeley models comprising local/overall thermal sensation and comfort models offer insights in this regard, they lack follow-up assessments for occupants transitioning from very cold states. In this study, Berkeley models were evaluated using two sets of experimental data collected in a transient vehicle cabin under cold outdoor conditions: test (A) with cabin HVAC alone and test (B) with both HVAC and local warmers. The findings confirm the satisfactory performances of the Berkeley models for predicting overall sensation and comfort, with a maximum root mean-squared error (RMSE) of 0.15. The local comfort model performed poorly with the original coefficients across both datasets (maximum RMSE of 1.96). Therefore, the model coefficients were regressed for the dataset from test A and validated against the dataset from test B to achieve a maximum RMSE of 0.49. With these regressed coefficients, it was observed that moving toward a neutral overall state diminished the potential to maximize local comfort. Conversely, the local sensation model showed poor agreement (maximum RMSE of 1.9); we confirmed that accurate adaptive setpoint temperatures are a prerequisite for ensuring good predictions from the model. These findings are expected to contribute toward future efforts in using Berkeley models to formulate effective local warmer–HVAC operational strategies in electric vehicles.

Implications for extreme midlatitude weather events of secondary flow associated with polar jets

AbstractIn the Earth's general circulation, polar jets act as baroclinic pumps of angular momentum and heat. Reanalysis datasets indicate that shear changes near jets induce upward displacements of the jet cores, suggesting a weakening thermodynamic pumping over the last 50 years. From secondary flow theory, a well‐established principle in fluid dynamics, an increased frequency of heatwaves and persistent winter storms is expected. The ageostrophic wind shear between 700 and 50 hPa indicates the strength of this secondary circulation. The weakening tendency during the reanalysis period also exists in multimodel simulations under the RCP8.5 emissions scenario for the 21st century. The reduction between the periods 2005–2025 and 2081–2100 reaches 18%, 5.3% and 19%, respectively, for the North America, Mid‐Europe and East Asia sectors of the Northern Hemisphere polar jet. Within this background, cold‐surge events are the result of synergic co‐working of several factors. The occurrence trend for transitional season winter extreme events also is examined. The winter extremes seemingly have larger temperature drops. However, in a warming climate, they emerge more rapidly from extreme cold states. The storm tracks, especially over North America, have equatorward extensions, indicating that winter storms can reach lower latitudes. Due to the temperature‐dependence of air viscosity, secondary flows decrease more slowly than the main zonal flow. This imposes an important adjustment to the traditional polar amplification effects on midlatitude winter extremes. During a warmer winter (the primary manifestation of a warmer climate), spatially uniform positive trends in cold extreme events are not expected. There are, however, regions experiencing more winter extremes. These regions show consistent patterns in both the reanalysis period and the remainder of the 21st century.

Spatial Patterns and Evolution Features of Marine Cold Spells in the Arabian Sea during the Past Three Decades

Marine Cold Spell (MCS) events are cold sea states with potentially devastating impacts on marine environments and ecosystems. In this study, we analyzed different MCS types with various severe categories in the Arabian Sea during 1994–2023. We found that all four types of MCS events shared a similar spatial pattern in terms of frequency, mean duration, mean intensity, and total days, but the frequency of 1-MCS events had a sharply decreasing trend compared with any other type of MCS events, indicating that ocean warming mainly led to the significant disappearance of short-period MCS events. Moreover, the MCS events in offshore Somalia had the highest occurring frequency, longest duration, largest intensity, and maximal total days, and were significantly different from those in other regions of the Arabian Sea. This is originated from that the cold–warm changes of the Somali current make larger fluctuations in the sea surface temperatures of the waters off Somalia, enhancing the occurring probability of MCS events, especially during the summers.

Polyurethane Based Smart Composite Fabric for Personal Thermal Management in Multi-Mode.

Textiles with thermal/moisture managing functions are of high interest. However, making the textile sensitive to the surrounding environment is still challenging. Herein, a multimodal smart fabric is developed by stitching together the Ag coated thermal-humidity sensitive thermoplastic polyurethane (Ag-THSPU) and the hybrid of polyvinylidene fluoride and polyurethane (PU-PVDF). The porous PU-PVDF layer is used for solar reflection, infrared emissivity, and water resistance. The Ag-THSPU layer is designed for regulating thermal reflection, sweat evaporation as well as convection. In cold and dry state, the Ag domains are densely packed covering the crystalline polyurethane matrix, featuring low water transmission (102.74gm-2·24h-1), high thermal reflection and 2.4°C warmer than with cotton fabric. In the hot and humid state, the THSPU layer is swollen by sweat and expands in area, resulting in the formation of micro-hook faces where the Ag domains spread apart to promote sweat evaporation (2084.88g/m-2·24h-1), thermal radiation and convection, offering 2.5°C cooler than with cotton fabric. The strategy reported here opens a new door for the development of adaptive textiles in demanding situations.

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State

Low-loss vanadium dioxide-enabled mmWave tunable reflective electromagnetic surface with complementary unit cells for wave manipulation

This study presents a novel implementation of vanadium dioxide (VO2) phase change material in an electromagnetic (EM) surface with beam steering capabilities. For the first time, we present the design, fabrication, and measurement of a globally actuated, VO2-based beamforming reflective EM surface. We propose a design featuring complementary unit cells that enable beam steering with a single excitation, marking a pioneering use of low-loss VO2 in creating a complementary EM surface for the mmWave band. The unit cells incorporating VO2 exhibit low-loss characteristics, with −0.92 and −1.9 dB in the hot state and −0.49 and −0.25 dB in the cold state, respectively. We incorporate both positive and negative phase variants alongside two temperature-independent phase unit cells. The complementary design enables us to utilize two beam operating states, effectively exploiting the otherwise unused cold state. We experimentally demonstrated beamforming at ±5° and ±10° from the broadside. In the case of ±10°, the measured gains at 35 GHz in the cold and hot states were 19.4 and 20.3 dB, respectively, which aligned well with the simulated gains of 20.9 and 21.5 dB. Manipulation of the electromagnetic wave direction with a single excitation has the potential for imaging, sensing, and communication applications. The complementary unit cell design methodology can be further adapted for mmWave beamforming, absorbing, and cloaking reconfigurable EM surfaces. Furthermore, the use of VO2 can be extended up to sub-THz frequencies due to the wideband, low-loss characteristics compared with conventional reconfigurable devices, such as PIN diodes or MEMS switches.

Fluidization characteristics of ore particles for downstream hydrogen mineral phase transformation equipment

Fluidized roasting is an effective way to deal with refractory iron ores. Fluidization is a prerequisite for the effective occurrence of physical and chemical reactions. This article conducts cold state experiments on Single-layer Overflow type Reaction Chamber, using hematite ore and quartz as bulk particles，processing pressure drop signals to analyze and explain gas-solid motion. The results indicate that the gas flow average pressure drop being stable is the criterion for the fluidized bed, the bulk properties significantly affect the critical fluidization characteristics. Pressure drop pulsation is an important characteristic of fluidized bed, fluidized gas velocity, initial bed height, and bulk properties all affect the amplitude of bed pressure drop pulsation, and the spectrum analyses of bed pressure drop signals all exhibit “High-energy and Low-frequency”. This study has certain guiding significance for the structural design optimization and engineering scaling of Downstream Hydrogen Mineral Phase Transformation Equipment.

Quaternary tectonic and climatic forcing on the spatio-temporal evolution of the Meuse fluvial terrace staircase

The Quaternary is characterized by pronounced alterations between cold and warm climatic states, with the Mid-Pleistocene Transition marking a strong increase in the intensity of cold-climate conditions. River systems are sensitive to environmental perturbation (e.g., climate, tectonics, base level) and are expected to respond to such profound changes. This study uses a combination of terrace mapping and analysis of a dense borehole database to investigate the Meuse terrace staircase (and its deposits), and gain insight on how it reflects climatic and tectonic perturbations during the Quaternary. The lower reaches of the Meuse river, which has both its main water and sediment source in the Ardennes displays a well-developed terrace staircase that was sculpted mainly throughout the Quaternary. The staircase is located near the cities of Maastricht (southern Netherlands) and Liège (northwestern Belgium). About 30 terrace levels reflect signals of environmental perturbations in the lithological composition, gradients, thicknesses, and spatial distribution. The terraces are organized in groups, based on their morphological position, from old to young; these are the East Meuse terrace group and West Meuse High-, Middle- and Low terrace groups. Our findings show a consistent increase in the gravel content from older to younger terraces. The sandier composition of the deposits of the oldest terraces (Early Pleistocene) is closely related to the supply of the Miocene-Pliocene weathered material from the Ardennes. Younger terraces (Middle and Late Pleistocene) are much richer in gravel, evidencing sediment input from fresh or partially weathered bedrock. These changes point to a downstream migration of the gravel front throughout the Quaternary. The mean thickness of the terrace groups shows a slight increase, even though the same trend is not clear when each terrace is analyzed on an individual basis. The anomalous thickness of the Caberg 1 terrace suggests increased sediment input during the cold climatic conditions of the Elsterian (MIS 12), the first Quaternary glacial during which an ice sheet extended into the northern Netherlands. Reconstruction of terrace gradients reveals that older East Meuse terraces show a (reversed) gradient opposite to reconstructed palaeo flow directions, which is attributed to a combination of low gradients during terrace formation and footwall back-tilting of the Feldbiss Fault Zone. In our analysis we do not see clear evidence for the imprint of the Mid-Pleistocene Transition, which suggests that due to its gradual nature, its signal is either buffered or assimilated by the overall climatic signal of the Quaternary. This study offers a first complete temporal analysis of the Meuse terrace staircase, providing an important basis for better understanding the effects of Quaternary climatic change and tectonics, and their resulting effects in other river systems worldwide.

Reconfigurable intelligent surface and switchable electromagnetic interference shield based on dynamically adjustable composite film of cellulose nanofibers and VO2 nanoparticles

The emerging fields of 5G and 6G telecommunication networks, Internet of Things, and artificial intelligence have intensified the demand for green nanostructured materials with adjustable and intelligent features that respond to external stimuli. By leveraging the insulator-to-metal transition of VO2 nanoparticles, responsive composite films were developed by integrating these nanoparticles within a biopolymeric network of cationic cellulose nanofibers (CNF+). These films exhibit a reversible change in GHz permittivity upon exposure to thermal or optical stimuli, facilitating dynamic control of their electrical properties. The layered structure of the films further enhances their robustness, featuring a VO2 nanoparticle core encased within CNF+ layers. This design not only strengthens the structure but also significantly boosts light-induced conductivity, particularly in layered variant, underscoring its potential in optoelectronic applications. Simulation studies reveal that the nonuniform, reconfigurable intelligent surface (RIS) of the developed mixed film adeptly manipulates incident electromagnetic waves, making it suitable for 5G/6G wireless signals. Conversely, the layered film serves as a switchable electromagnetic interference (EMI) shield, demonstrating notable differences in shielding efficiency between its hot and cold states. Consequently, CNF+/VO2 composite films designed in this work emerge as a versatile, adaptable platform for intelligent electronics, particularly in the realm of 5G/6G wireless communications.

The early Cretaceous was cold but punctuated by warm snaps resulting from episodic volcanism

The Cretaceous is characterized as a greenhouse climate from elevated atmospheric carbon dioxide concentrations, transgressive seas, and temperate ecosystems at polar paleolatitudes. Here we test the hypothesis that the early Cretaceous was a cold climate state with a new Aptian atmospheric carbon dioxide record from the C3 plant proxy and early Cretaceous sea level curve from stable oxygen isotopes of belemnites and benthic foraminifera. Results show that carbon dioxide concentrations were persistently below 840 ppm during the Aptian, validating recent General Circulation Model simulations of ice sheets on Antarctica at those concentrations. In addition, sea level was estimated to be within the ice sheet window for much of the early Cretaceous prior to the Albian. This background state appears to have been episodically interrupted by Large Igneous Province volcanism followed by long-term carbon burial from weathering. We hypothesize that the early Cretaceous was largely an icehouse punctuated by warm snaps.

Simulation of Transient Temperature and Clearance after Shutdown of Aeroengine Based on CFD and FEA Coupled Models

It is crucial to comprehend the heat soak phenomenon, which may result in a significant temperature increase after the shutdown followed by a gradual decrease. This could bring potential risks for the engine including oil coking. The temperature change of engine components dictates the clearance after shutdown, while startup strategies are primarily based on this. A simulation strategy, utilizing computational fluid dynamics (CFD) and finite element analysis (FEA) coupled models, is suggested to investigate the transient temperature and clearance after shutdown. The maximum temperature deviation between the simulation result and experimental data are less than 6%. Flow parameters, including velocity and mass flow rate obtained from the CFD result, were applied as boundaries of the FEA model. Based on the FEA model, transient temperature calculations were also conducted for 20 hours after shutdown. The results indicate that the FEA model demonstrates good agreement with the CFD simulation, with a maximum deviation of less than 5% and at only 0.2% of the simulation time. After the engine shuts down, the stator’s temperature change rate is faster than that of the rotor due to better cooling conditions and relatively small heat capacity. Consequently, the seal clearance increases in the initial period after shutdown and then decreases to a minimum value. The nondimensional minimum clearance can be 0.8 times the cold state value at the location of the high-pressure turbine seal.

Analysis of Thermoacoustic Instabilities Using the Helmholtz Method in a Swirled Premixed Combustor

The Helmholtz method is developed to predict the self-excited thermoacoustic instabilities in a gas turbine combustor, combining flame describing functions, the measured damping rates under the firing condition, and the non-uniform spatial distributions of the physical parameters. The impact of the hydrodynamic and geometrical parameters on the thermoacoustic instabilities is investigated. The measured damping rates show lower values under a hot condition compared with those in a cold state. The experimental results indicate that the relative errors of the predicted eigenfrequencies and the velocity fluctuation levels are below 10%. The pressure amplitude decreases and the phase increases in the axial direction, indicating a typical 1/4-wavelengh mode. At a higher equivalence ratio, the mode shape in the axial direction becomes steeper due to the elevated fluctuation amplitude at the pressure antinode after enhancing the thermal power. When the air flow rate increases, the discrepancies between the pressure shape on the flame tube side and that on the plenum side are reduced. The velocity fluctuation level increases as the combustor length increases at a constant damping rate. In fact, the velocity fluctuation level first increases and then declines, caused by more significant damping rates when employing longer flame tubes. Self-excited thermoacoustic instabilities can be well predicted using the proposed method.

Экспериментальные исследования воспламенения и горения каменного угля с применением плазменной активации

This work presents experimental studies of a promising method of ignition and combustion of coal fuel using plasma activation. Experimental studies were carried out on a bench with a thermal power of up to 5 MW. As an experimental sample, hard coal of the GD grade was chosen selected after a ball drum mill with a sieve residue of R90 = 15%. The conditions were close to industrial ones used when lighting coal boilers. The operating range of pulverized coal flow velocities in the electric arc unit has been determined. It has been established that a stable process of ignition and further combustion of coal is possible at flow rates on the electric arc unit from 6 to 13 m/s. The experimental stand was kindled from a cold state to a temperature of 1000 °C at excess air coefficients a from 0.5 to 0.7, the kindling time did not exceed 200 seconds. Based on the experiments, CFD modeling determined whether the process conditions were met.

Visualizing a Cold Stress-Specific Pulse Wave in Traditional Pulse Diagnosis ('Tight Pulse') Correlated with Vascular Changes in the Radial Artery Induced by a Cold Pressor Trial.

Radial pulse diagnosis is the most common method to examine the human health state in Traditional East Asian Medicine (TEAM). A cold stress-related suboptimal health state (subhealth) is often undetectable during routine medical examinations, however, it can be detected through the palpation of specific pulse waves, particularly a 'tight pulse', in TEAM. Therefore, this study examined a correlation between 'tight pulse' and vascular changes in the radial artery (RA) induced by a cold pressor trial (CPT). Twenty healthy subjects underwent sequentially control trial and CPT with room-temperature and ice-cold water, respectively, on the right forearm. The radial pulse and vascular changes were then examined on the left arm. The radial pulse scores for frequencies of 'tight pulse' with strong arterial tension increased after the CPT compared with the control trial. The pulse scores were reversely correlated with the RA thickness and volumes in ultrasonography, but not with changes in the systolic/diastolic blood pressure. The RA thickness-based vascular surface and three-dimensional images visualized a 'tight pulse' showing the vasoconstriction and bumpy-/rope-shaped vascular changes in the radial pulse diagnostic region after the CPT. These findings provide valuable insights into the potential integration of clinical radial pulse diagnosis with ultrasonography for cold-related subhealth.

Activating the Fluorescence of a Ni(II) Complex by Energy Transfer.

Luminescence of open-shell 3d metal complexes is often quenched due to ultrafast intersystem crossing (ISC) and cooling into a dark metal-centered excited state. We demonstrate successful activation of fluorescence from individual nickel phthalocyanine (NiPc) molecules in the junction of a scanning tunneling microscope (STM) by resonant energy transfer from other metal phthalocyanines at low temperature. By combining STM, scanning tunneling spectroscopy, STM-induced luminescence, and photoluminescence experiments as well as time-dependent density functional theory, we provide evidence that there is an activation barrier for the ISC, which, in most experimental conditions, is overcome. We show that this is also the case in an electroluminescent tunnel junction where individual NiPc molecules adsorbed on an ultrathin NaCl decoupling film on a Ag(111) substrate are probed. However, when an MPc (M = Zn, Pd, Pt) molecule is placed close to NiPc by means of STM atomic manipulation, resonant energy transfer can excite NiPc without overcoming the ISC activation barrier, leading to Q-band fluorescence. This work demonstrates that the thermally activated population of dark metal-centered states can be avoided by a designed local environment at low temperatures paired with directed molecular excitation into vibrationally cold electronic states. Thus, we can envisage the use of luminophores based on more abundant transition metal complexes that do not rely on Pt or Ir by restricting vibration-induced ISC.

Thermochromic Nanocellulose Films for Temperature-Adaptive Passive Cooling.

Energy efficiency in habitation spaces is a pivotal topic for maintaining energy sufficiency, cutting climate impact, and facilitating economic savings; thus, there is a critical need for solutions aimed at tackling this problem. One viable approach involves complementing active cooling methods with powerless or passive cooling ones. Moreover, considerable scope remains for the development of passive radiative cooling solutions based on sustainable materials. Cellulose, characterized by its abundance, renewability, and biodegradability, emerges as a promising material for this purpose due to its notable radiative cooling potential exploiting the mid-infrared (MIR) atmospheric transmission window (8-13 μm). In this work, we propose the utilization of thermochromic (TC) materials in conjunction with cellulose nanofibrils (CNF) to confer temperature-dependent adaptivity to hybrid CNF films. We employ a concept where high reflection, coupled with MIR emission in the heated state, facilitates cooling, while high visible light absorption in the cold state allows heating, thus enabling adaptive thermal regulation. CNF films were doped with black-to-leuco TC particles, and a thin silver layer was optionally applied to the films. The films exhibited a rapid transition (within 1 s) in their optical properties at ∼22 °C, becoming transparent above the transition temperature. Visible range transmittance of all samples ranged from 60 to 90%, with pronounced absorption in the 8-13 μm range. The cooling potential of the films was measured at 1-4 °C without any Ag layer and ∼10 °C with a Ag layer. In outdoor field testing, a peak cooling value of 12 °C was achieved during bright sunshine, which is comparable to a commercial solar film. A simulation model was also built based on the experimental results. The concept presented in this study extends beyond applications as standalone films but has applicability also in glass coatings. Overall, this work opens the door for a novel application opportunity for green cellulose-based materials.

Improving the combustion of scramjet engines with struts using grooves and bumps

Grooves and bumps are arranged on both sides of a normal strut (NS) to fabricate vortex generators, and introduce streamwise vortices. Struts with sawtooth grooves (GS-1), rectangular bumps (BS-1), and trapezoidal and triangular bumps (BS-2) have been proposed. In this study, struts with V-shaped grooves (GS-2) and trapezoidal and triangular bumps (BS-3) were configured. The flow fields in the cold and hot states of scramjet combustors with NS, GS-1, GS-2, BS-1, BS-2, and BS-3 were simulated numerically using steady RANS equations and an SST k-ω turbulence model. The results show that proper arrangement of the grooves and bumps on the strut can improve the mixing and combustion performance. Compared with the NS, for GS-1, GS-2, BS-1, BS-2, and BS-3, the distance required to achieve 100% fuel mixing efficiency is shorter by 21.2%, 9.1%, 18.2%, 12.1%, and 15.2%, respectively, and to achieve 100% combustion efficiency, the distance is shorter by 42.7%, 46.9%, 47.9%, 53.1%, and 58.3%, respectively. Therefore, improvement in combustion performance does not positively correlate with improvement in the mixing performance. Large-scale heat and mass convection in streamwise vortices play a dominant role in mixing. The larger the proportion of the fuel area affected by the streamwise vortices, the more conducive it is to achieving a higher mixing performance, whereas the wall has a negative impact. However, the large-scale heat and mass convection in the streamwise vortices and small-scale heat and mass convection in the high-turbulence zones are closely related to the supply of oxygen and fuel required for the combustion zone. Large-scale streamwise vortices combined with thick high-turbulence zones are conducive to achieving a high combustion rate. When the recirculation zone has a larger combustion area and smaller wall effects, a higher combustion performance is easily achieved. Compared with the grooves, the stronger disturbance effect of the bumps on the fluid effectively increased the thickness of the high-turbulence zone, thus obtaining a higher combustion performance. However, the greater blocking area and new oblique shockwaves generated by the bumps induced a greater total pressure loss. Therefore, combining bumps and grooves can further optimize strut configurations.

Effect of Liquid Plastic Steel and Epoxy Resin on Pipes

Using different materials to repair mechanical parts in cold state (non-fire repair), the mechanical properties of the repaired materials have different effects. In order to explore the advantages and disadvantages of liquid plastic steel repair agent and epoxy resin repair agent, the repair effects of two cold repair materials were compared. The mechanical properties of L245 pipeline steel before and after repair, such as tensile properties, shear properties and bonding properties, were tested with small size samples. The test results show that the average tensile strength of the reinforced tensile sample of plastic steel is 2MPa higher than that of the ordinary epoxy tree, and the tensile strength is increased by 0.4%; the average yield strength of the reinforced tensile sample of plastic steel is 5Mpa higher than that of the ordinary epoxy tree, and the yield strength is increased by 1.5%. The shear strength of the reinforced tensile specimen of plastic steel is 1.67MPa higher than that of the ordinary epoxy tree reinforced tensile specimen, and the shear strength is increased by 22%.