Cold Atmospheric Pressure Plasma Jet Research Articles

Physicochemical properties and antimicrobial efficacy of argon cold atmospheric pressure plasma jet activated liquids – a comparative study

Cold atmospheric pressure plasma jet activated liquids (CAPJALs) have attracted considerable scientific attention due to their peculiar antimicrobial characteristics. In the current context, there is a need to compare the bactericidal activity of CAPJALs and demonstrate the specific parameters necessary to obtain greater effectiveness. This in-vitro research examines the antimicrobial activity of liquids, such as deionized water (DI-W), drinking water (DW), tap water (TW), and normal saline (NS) activated by Ar cold atmospheric pressure plasma jet (CAPJ) against multidrug-resistant (MDR) E. coli and S. aureus. The computed D- value showed that CAPJALs' bacterial inactivation efficacy followed the trend – DI-W ≈ NS > DW > TW for both the isolates. To obtain greater bactericidal effectiveness, an optimum combination of liquid activation time by CAPJ and CAPJAL – bacteria interaction time was noticed. In addition, the rate at which the physicochemical parameters (pH, electrical conductivity (EC), total dissolved solids (TDS), and concentration of reactive species (H2O2, NO3-, and NO2-)) changed within the liquid varied in different ways. It was observed that the identified gas-phase species (Ar I, Ar+, N2, N2+, O I, OH•, OH+, NO+, O2+, N2O3-, NO3-, N2O2-, etc.) would contribute to modification of liquid physicochemical property by generating liquid phase reactive species (NO3-, NO2-, H+, H2O2, ONOOH, Cl2, HOCl, etc.) via reaction cascades. These reactive species in the liquid phase, together with other physicochemical characteristics, were found to play a part in the process of bacterial inactivation. This study into the underlying mechanism of CAPJ – liquid and CAPJAL – bacteria interaction would help to determine its potential use as a disinfectant in healthcare settings. List of microorganismsE. coli: Escherichia coli; S. aureus: Staphylococcus aureus

Cold Atmospheric Pressure Plasma May Prevent Oral Mucositis-Related Candidemia in Chemotherapy-Treated Rats.

Oral mucositis associated with candidiasis can causes systemic candidemia, posing a risk to cancer patients administered antineoplastic therapy. Cold atmospheric pressure plasma jets (CAPPJs) have antifungal and anti-inflammatory properties. This study evaluated the effects CAPPJs in preventing systemic fungal dissemination in a murine model of oral mucositis associated with candidiasis. Forty Wistar rats were divided into groups: CAPPJs (treated) and non-treated controls (for comparison), with subgroups subject to 24 and 72 h of treatment (n = 10 each). Four cycles of chemotherapy (cisplatin and 5-fluorouracil (5-FU)) were administered, followed by oral inoculation of Candida albicans for 3 days. Mucosal damage was induced on the lateral side of tongue with 50% acetic acid. CAPPJ treatment was performed on the lesion for 5 min (2 days). Body weight was assessed daily. Fungal dissemination was conducted using organ macerates and plated on Sabouraud Agar with chloramphenicol. Blood samples were obtained for blood count tests. Chemotherapy affected the general health of the animals, as evidenced by body weight loss. Treatment with CAPPJs showed an inhibitory effect on C. albicans, with a significant reduction in fungal recovery from the tongue after 24 h (p < 0.05). Interestingly, systemic fungal dissemination was significantly reduced after 24 and 72 h of treatment when compared to control (p < 0.05). Taken together, these results suggest that CAPPJs have potential for clinical application in patients with oral mucositis at risk of candidemia.

Characterization of modified low‐density polyethylene by cold atmospheric pressure plasma jet treatment in the melt state

AbstractCold plasma treatment in the melt state is a novel area of research focused on producing modified polymers, hence more research on the underlying plasma‐polymer interactions in this context is needed. In this study, low‐density polyethylene (LDPE) was treated with a cold atmospheric pressure plasma jet (CAPPJ) during melt processing in a polymer batch mixer. Electron spin resonance (ESR) results proved that plasma treatment effectively generates free radicals in the material, increasing the room temperature spin concentration by an order of magnitude to 2 × 1015 spins g−1. The generated radicals react mainly by cross‐linking, forming a gel phase of up to 31%, and consequently increasing the polymer's melt viscosity. Furthermore, oxidation was established as solely a thermal effect limited by radical availability at the interface exposed to the atmosphere, whereas plasma exposure did not lead to further oxidation. Interestingly, plasma appears to interact with the thermally created ketone groups, possibly forming unsaturated carbonyl compounds.

Sample Thickness and Edge Proximity Influence Spatial Behavior of Filaments and Treatment Uniformity of RF Cold Atmospheric Pressure Plasma Jet

AbstractThe ability of atmospheric pressure plasma jets to treat complex non-planar surfaces is often cited as their advantage over other atmospheric plasmas. However, the effect of complex surfaces on plasma parameters and treatment efficiency has seldom been studied. Herein, we investigate the interaction of the atmospheric pressure plasma slit jet (PSJ) with block polypropylene samples of different thicknesses (5 and 30 mm) moving at two different speeds. Even though the distance between the slit outlet and the sample surface was kept constant, the treatment efficiency of PSJ ignited in the Ar and $$\hbox {Ar/O}_2$$ Ar/O 2 gas feeds varied with the sample thickness due to the plasma parameters such as filament count and speed being affected by the different distances of the ground (the closer the ground is, the higher the discharge electric field). On the other hand, the $$\hbox {Ar/N}_2$$ Ar/N 2 PSJ diffuse plasma plumes were less affected by the changes in the electric field, and the treatment efficiency was the same for both sample thicknesses. Additionally, we observed a difference in the efficiency and uniformity of the PSJ treatment of the edges and the central areas in some working conditions. The treatment efficiency near the edges depended on the duration of the filament contact, i. e., how long the local electric field trapped the filaments. Conversely, the treatment uniformity near the edges and in the central areas was different if the number of filaments changed rapidly as the discharge moved on and off the sample (the 5 mm samples treated by easily sustained Ar PSJ).

Analysis of discharge parameters of an argon cold atmospheric pressure plasma jet and its impact on surface characteristics of White Grapes

An argon cold atmospheric-pressure plasma (CAP) jet operated using bipolar pulsed power supply has been characterised electro-optically and the discharge parameters are optimized. An analysis has been done on the impact of the argon CAP jet treatment on the surface properties of white grapes for different treatment time period. The developed argon CAP jet is a plasma source based on dielectric barrier discharge (DBD) that has been tuned at various input parameters including applied voltage, frequency, average power consumption, and argon flow rate. Optical Emission Spectroscopy (OES) is used to identify the generated species along with plasma parameters. The collisional–radiative (CR) model is employed to extract the electron density (ne) and electron temperature (Te) from the spectra at the optimised applied voltage of 4 kV, frequency 20 kHz and argon flow rate of 4 slpm. The OES results coupled with the CR model (ne ∼ 1014 cm−3 and Te ∼ 1 eV) and the plasma gas temperature measurement through OH (A-X) transitions (Tg ∼ 310.5 K) show the non-equilibrium nature of the argon CAP jet. A comparative analysis between untreated and treated white grapes reveals that the argon CAP jet treatment influences surface microstructure, increasing hydrophilicity (with a ∼49.3% decrease in water contact angle) along with slight changes in surface temperature (∼5 °C increase), colour (ΔE* < 1.5), and physiochemical properties such as chemical composition (no change) and Total Soluble Solid (TSS) content (∼8.3%). It is inferred that this type of CAP jet treatment of white grapes only affects the physical characteristics of the grape surface and does not alter any chemical compositions.

A comparative study of Fibre Bragg Grating for spatially and temporally resolved gas temperature measurements in cold atmospheric pressure plasma jets

Abstract Cold atmospheric pressure plasma jets (CAP-Jet) are successfully used in medical ther-apy for healing of chronic wounds and are widely researched in inactivation of patho-gens and in assisting in cancer therapy. A crucial parameter for these plasma applica-tions is that CAP-Jets operate at temperatures that are tolerable for biological tissues. While tools characterizing the plasma's gas temperature are well developed, there are only a few methods that work with an agreeable limit of uncertainty, complexity and limited perturbation properties to accurately determine that the studied plasma jet operates at tissue tolerable temperatures at all times. In the current work, time resolved measurements of the gas temperature in the effluent of a CAP-Jet are performed using the innovative technique of a Fibre Bragg Grating (FBG), in which the temperature dynamics is measured by a shift of the FBGs resonant wavelength through its thermo-optic coefficient. Comparing with other temporal and spatial diagnostic tools such as thermocouple measurement, Schlieren imaging, and optical emission spectroscopy, we demonstrate reliable calorimetric measurements at different plasma duty cycles. The plasma source maintains tissue tolerable temperatures inside the plasma active zone with values below 35°C at 1 cm distance from the jet nozzle. The calorimetric measure-ments have revealed that the heat power dissipation in comparison to electric energy of our plasma source is at least 50%.

Elucidating the bacterial inactivation mechanism by argon cold atmospheric pressure plasma jet through spectroscopic and imaging techniques.

This study aims to assess the potential bacterial inactivation pathway triggered by argon (Ar) cold atmospheric pressure plasma jet (CAPJ) discharge using spectroscopic and imaging techniques. Electrical and reactive species of the Ar CAPJ discharge was characterized. The chemical composition and morphology of bacteria pre- and post-CAPJ exposure were assessed using Fourier transform infrared (FTIR), Raman micro-spectroscopy, and transmission electron microscopy (TEM). A greater than 6 log reduction of E. coli and S. aureus was achieved within 60 and 120 s of CAPJ exposure, respectively. Extremely low D- values (< 20 s) were recorded for both the isolates. The alterations in the FTIR spectra and Raman micro-spectra signals of post-CAPJ exposed bacteria revealed the degree of destruction at the molecular level, such as lipid peroxidation, protein oxidation, bond breakages, etc. Further, TEM images of exposed bacteria indicated the incurred damages on cell morphology by CAPJ reactive species. Also, the inactivation process varied for both isolates, as evidenced by the correlation between the inactivation curve and FTIR spectra. It was observed that the identified gas-phase reactive species, such as Ar I, O I, OH•, NO+, OH+, NO2-, NO3-, etc. played a significant role in bacterial inactivation. This study clearly demonstrated the effect of CAPJ exposure on bacterial cell morphology and molecular composition, illuminating potential bacterial inactivation mechanisms.

Biochemical evaluation of wound healing efficacy of cold plasma-conditioned media under different operational conditions

Wound healing is a dynamic and intricate biological process crucial for tissue repair and regeneration. This study explores the potential therapeutic impact of non-thermal plasma generated by a hand-held cold atmospheric pressure plasma jet (C-APPJ) source on fibroblast cells (NIH/3T3) in vitro. The sequential phases of wound healing—inflammation, cell proliferation, and tissue remodelling, were assessed in the context of cell migration and oxidative stress dynamics. Typically, plasma generates a mixture of several reactive oxygen/nitrogen (ROS/RNS) species. The present study investigates the safety and efficacy of C-APPJ under distinct operating conditions (argon (GI) and argon + nitrogen (GII)) and exposure times (1 min and 3 min). Cell viability assays confirmed the non-cytotoxic nature of the cold plasma conditioned medium. The levels of ROS/RNS and malondialdehyde (biomarker of oxidative stress) in the plasma-treated samples remained comparable with the control fibroblast cells grown in normal media, suggesting the favourable modulation of ROS by the cellular antioxidant mechanisms. Accelerated wound-closure rates from 6th hour to 24th hour in all the treated groups ranged from 38.76% to 45.66%, when compared to 34.25% in the control cells. Substantial cell migration leading to 51.59% of wound closure was recorded in the argon + nitrogen (GII) group exposed for 3 min. Taken together, the potential of cold plasma to effectively heal wounds without causing prolonged oxidative stress and chronic inflammation is implicated. These outcomes suggest scope for clinical application of C-APPJ as safe and cost-effective treatment of wounds (ulcers, burns, diabetic foot) and wound disinfection.

Demonstration for cold atmospheric pressure plasma jet operation and antibacterial action in microgravity

Cold atmospheric pressure plasma (ionized gas) is an innovative medical tool for the treatment of infected wounds thanks to its potential to inactivate drug-resistant microorganisms and promote tissue regeneration and vascularization. The low power consumption, compactness, and versatility of Cold Atmospheric Pressure Plasma (CAPP) devices make them an ideal tool for risk mitigation associated with human spaceflights. This work presents results in microgravity on the operability of CAPP and its antimicrobial effect. The experiments carried out in parabolic flights make it possible to optimize the treatment conditions (i.e., the distance, the gas mixture) and to obtain the rapid inactivation (<15 s) of Escherichia coli samples. Interestingly, the inactivation efficiency of CAPP was higher during parabolic flights than under terrestrial conditions. Overall, these results encourage the further development of CAPP medical devices for its implementation during human spaceflights.

Comparative analysis of disinfection effectiveness of Helium CAP jet, sodium hypochlorite and QMix in Enterococcus faecalis infected root canals

In this work, a new geometry Helium Cold Atmospheric-pressure Plasma (CAP) jet operated using bi-polar pulsed power source is reported. Its effectiveness in disinfecting E. faecalis infected root canals is evaluated and compared to that of 5.25% NaOCl and QMix at various time intervals. Before treatment, the jet has been characterized electrically and accordingly optimized for different operating parameters. Kruskal–Wallis Rank Sum and Wilcoxon tests are performed to analyse the difference among all the treatment groups. The CAP jet has shown maximum antibacterial efficiency at 10 min of exposure. CAP Jet, NaOCl, and QMix treatment achieved maximum percentage reductions of 90.8%, 99.99% and 96%, respectively. However, NaOCl and QMix have several disadvantages. It is predicted that the controlled exposure of CAP jet can be used as root canal disinfectant and best optimized further as a non-intrusive method.

Coherent homodyne detection for amplified cross-beam electric-field induced second harmonic

The electric-field induced second harmonic (E-FISH) signal sensing is commonly used as a nonlinear optical technique to probe electric fields inside a plasma region. Cross-beam E-FISH is being investigated to improve spatial resolution by defining the interaction volume via a controlled geometry of two overlapping noncolinear optical beams. This drastic reduction in interaction length of the electric field and laser region results in a significant signal reduction. To overcome this signal reduction, we introduce coherent amplification of the cross-beam E-FISH signal by mixing the low E-FISH signal with a phase-locked bright local oscillator. We demonstrate enhancement of the signal. By introducing a local oscillator we can now derive the polarity of the measured electric field through the phase of the homodyne signal. To illustrate the technique, we, for the first time, to the best of our knowledge, measure the magnitude and the direction of the electric field in a cold atmospheric pressure plasma jet, which dynamically follows the profile of the applied bias current.

Fast synthesis of gold nanoparticles by cold atmospheric pressure plasma jet in the presence of Au+ ions and a capping agent

Homogeneous gold nanoparticles were synthesized under atmospheric pressure using a non-thermal helium plasma jet in a single-step process. A current power supply was used to generate the plasma discharge rich in diverse reactive species. These species induce rapid chemical reactions responsible for the reduction of the gold salts upon contact with the liquid solution. In this study, spherical and monodispersed gold nanoparticles were obtained within 5 min of plasma exposure using a solution containing gold (III) chloride hydrate (HAuCl4) as a precursor and polyvinylpyrrolidone (PVP) as a capping agent to inhibit agglomerations. The formation of these metal nanoparticles was initially perceptible through a visible change in the sample’s color, transitioning from light yellow to a red/pink color. This was subsequently corroborated by UV-vis spectroscopy, which revealed an optical absorption in the 520‒550 nm range for Au NPs, corresponding to the surface plasmon resonance (SPR) band. An investigation into the impact of various parameters, including plasma discharge duration, precursor and capping agent concentrations, was carried out to optimize conditions for the formation of well-separated, spherical gold nanoparticles. Dynamic light scattering (DLS) was used to measure the size of these nanoparticles, transmission electron microscopy (TEM) was used to observe their morphology and X-ray diffraction (XRD) was also employed to determine their crystallographic structure. The results confirm that homogeneous spherical gold nanoparticles with an average diameter of 13 nm can be easily synthesized through a rapid, straightforward, and environmentally friendly approach utilizing a helium atmospheric pressure plasma.

Transient charge-driven 3D conformal printing via pulsed-plasma impingement

Seamless integration of microstructures and circuits on three-dimensional (3D) complex surfaces is of significance and is catalyzing the emergence of many innovative 3D curvy electronic devices. However, patterning fine features on arbitrary 3D targets remains challenging. Here, we propose a facile charge-driven electrohydrodynamic 3D microprinting technique that allows micron- and even submicron-scale patterning of functional inks on a couple of 3D-shaped dielectrics via an atmospheric-pressure cold plasma jet. Relying on the transient charging of exposed sites arising from the weakly ionized gas jet, the specified charge is programmably deposited onto the surface as a virtual electrode with spatial and time spans of ~mm in diameter and ~μs in duration to generate a localized electric field accordantly. Therefore, inks with a wide range of viscosities can be directly drawn out from micro-orifices and deposited on both two-dimensional (2D) planar and 3D curved surfaces with a curvature radius down to ~1 mm and even on the inner wall of narrow cavities via localized electrostatic attraction, exhibiting a printing resolution of ~450 nm. In addition, several conformal electronic devices were successfully printed on 3D dielectric objects. Self-aligned 3D microprinting, with stacking layers up to 1400, is also achieved due to the electrified surfaces. This microplasma-induced printing technique exhibits great advantages such as ultrahigh resolution, excellent compatibility of inks and substrates, antigravity droplet dispersion, and omnidirectional printing on 3D freeform surfaces. It could provide a promising solution for intimately fabricating electronic devices on arbitrary 3D surfaces.

Simulation and experimental study of a cold atmospheric pressure plasma and comparison of efficiency in boosting recombinant Endoglucanase II production in Pichia pastoris.

Recombinant proteins are essential in various industries, and scientists employ genetic engineering and synthetic biology to enhance the host cell's protein production capacity. Stress response pathways have been found effective in augmenting protein secretion. Cold atmospheric pressure plasma (CAP) can induce oxidative stress and enhance protein production. Previous studies have confirmed the applicability of CAP jets on Phytase and green fluorescent protein (GFP) production in Pichia pastoris hosts. This study investigates the effect of CAP treatment on another valuable recombinant protein, Endoglucanase II (EgII), integrated into the Pichia pastoris genome. The results demonstrated that plasma induction via two different ignition modes: sinusoidal alternating current (AC) and pulsed direct current (DC) for 120, 180, and 240 s has boosted protein secretion without affecting cell growth and viability. The AC-driven jet exhibited a higher percentage increase in secretion, up to 45%. Simulation of plasma function using COMSOL software provided a pattern of electron temperature (Te) and density distribution, which determine the plasma cocktail's chemistry and reactive species production. Furthermore, electron density (ne) and temperature were estimated from the recorded optical spectrum. The difference in electron properties may explain the moderately different impressions on expression capability. However, cell engineering to improve secretion often remains a trial-and-error approach, and improvements are, at least partially, specific to the protein produced.

Investigation of the effectiveness of atmospheric pressure cold plasma on sciatic nerve injury in rats.

The aim of this study was to evaluate the efficacy of atmospheric pressure cold plasma jet and plasma activated medium (PAM) on sciatic nerve injury (SNI). Rats were divided into 6 groups (n = 10); group 1 (Sham), group 2 (SNI), group 3 (SNI + Atmospheric pressure cold plasma jet 5 min), group 4 (SNI + Atmospheric pressure cold plasma jet 10 min), group 5 (SNI + PAM 5 min), group 6 (SNI + PAM 10 min). On the 1st, 8th, 15th, 22nd days of the study, atmospheric pressure cold plasma jet was applied to rats in groups 3 and 4, and PAM was applied to rats in groups 5 and 6. Hot plate test was applied to all rats on the same days. On day 28, the experiment was terminated and sciatic nerve tissues were removed for histopathologic evaluations. According to the 4-week average of the hot plate tests, a significant relationship was found between group 2 and group 4 and group 6 (p < 0.05). When evaluated within each week, significant differences were found between group 2 and group 4 in week 1, between group 2 and group 5 and group 6 in week 2, between group 2 and group 4 in week 3, and between group 2 and group 4 and group 6 in week 4 (p < 0.05). As a result of histopathologic analysis, except for the control group, the other groups had similar characteristics in terms of axonal degeneration, periaxonal swelling and axon density. As a result of our study, we found that plasma application showed an improvement in the duration of the hot plate test, but did not show any improvement histopathologically.

Plasma water treatment for PFAS: Study of degradation of perfluorinated substances and their byproducts by using cold atmospheric pressure plasma jet

This study evaluates the effectiveness of non-thermal plasma at atmospheric pressure (NTP APPJ) for treating PFAS - contaminated water in different matrices. Successful removal of several perfluoroalkyl carboxylic acids (PFCAs) (C6 to C4), perfluroalkane sulfonic acids (PFSAs) (C8 to C4) and perfluropolyethers (PFPEs) (GenX and ADONA) PFAS compounds was achieved in laboratory scale experiments. In the deionized water (DW), high removal efficiencies (> 90%) were observed for longer-chain PFAS, PFOS (99.89%), PFHxA (94.61%) and ADONA (94.83%), while shorter- chain compounds had lower removal rates. Real water samples (tap water and synthetic effluent) showed lower overall degradation percentages (8–50%) depending on compound and matrix. Short-chain PFAS displayed around 10% removal in tap water, while PFOS and GenX achieved 50% and 32% removal, respectively. Complex matrix effects influence degradation rates. Byproducts from the plasma treatment were investigated, revealing distinct degradation mechanisms for various PFAS compounds. For PFSAs and PFCAs, degradation involved electron transfer, bond breaking and subsequent reactions. Conversely, ADONA and GenX degradation initiated with ether-group cleavage, followed by additional transformation processes. Plasma-based technology shows potential for degradation of PFAS, especially for newer substitute compounds like ADONA and GenX. However, further research is needed to optimize plasma performance for complete mineralization of PFAS. This study also proposes a degradation mechanism for ADONA, marking a novel investigation into ether-group PFAS degradation with potential implications for further research and understanding toxicological implications.

High-efficiency and low-damage modification of engineering metal materials by oxygen-mixing atmospheric pressure cold plasma jets

Engineering metal materials have been widely developed and applied in aviation, aerospace and biomedicine fields. Wettability improvement of these materials can alleviate problems caused by low adhesion and poor bioactivity, thereby facilitating their practical applications. Compared with other methods, atmospheric pressure cold plasma treatment has better versatility and can efficiently improve wettability without causing serious damages, and has therefore been widely used in polymer hydrophilization. However, when treating metal materials, the cold plasma may induce surface breakdown or have low efficiency. In this paper, we developed a new cold plasma jet by mixing oxygen into working gas to achieve high-efficiency and low-damage modification. When oxygen mixing ratio was 0.4 %, the cold plasma jet could modify TC4 titanium alloy surface to be superhydrophilic within 20 s, which was much more efficient than traditional plasma jet (120 s). We then further investigated the mechanism contributing to higher efficiency, and found that the oxygen-mixing plasma jet did not cause serious damages, while generating more polar groups by higher-concentration active particles, as confirmed by surface energy calculation and optical emission spectra. Besides titanium alloy, the oxygen-mixing plasma jet could also achieve rapid hydrophilization of various engineering metal materials, showing promising application prospects.

A large-scale cold plasma jet: generation mechanism and application effect

Atmospheric pressure cold plasma jets (APCPJs) typically exhibit a slender, conical structure, which imposes limitations on their application for surface modification due to the restricted treatment area. In this paper, we introduce a novel plasma jet morphology known as the large-scale cold plasma jet (LSCPJ), characterized by the presence of both a central conical plasma jet and a peripheral trumpet-like diffuse plasma jet. The experimental investigations have identified the factors influencing the conical and the trumpet-like diffuse plasma jet, and theoretical simulations have shed light on the role of the flow field and the electric field in shaping the formation of the LSCPJ. It is proved that, under conditions of elevated helium concentration, the distributions of impurity gas particles and the electric field jointly determine the plasma jet’s morphology. High-speed ICCD camera images confirm the dynamic behavior of plasma bullets in LSCPJ, which is consistent with the theoretical analysis. Finally, it is demonstrated that when applied to the surface treatment of silicone rubber, LSCPJ can achieve a treatment area over 28 times larger than that of APCPJ under equivalent conditions. This paper uncovers the crucial role of impurity gases and electric fields in shaping plasma jet morphology and opens up the possibility of efficiently diversifying plasma jet generation effects through external electromagnetic fields. These insights hold the promise of reducing the generation cost of plasma jets and expanding their applications across various industrial sectors.

Impact of open‐air processing on atmospheric pressure plasma deposition of poly(ethylene oxide) coatings for antifouling applications

AbstractAtmospheric pressure plasma deposition (APPD) of poly(ethylene oxide) (PEO)‐like antifouling coatings provides an attractive way to reduce biofouling for reliable biosensor operation. Cold atmospheric pressure plasma jets are designed to operate in open air. This paper demonstrates the impact of open‐air processing on the composition and properties of PEO‐like coatings by APPD with vinyl ether precursors. The open‐air environment inhibits polymerization as indicated by low deposition rates, oxygen incorporation in the coatings, and instability of the coatings in water. The composition and stability of the coatings improve by appropriate nozzle design and by deposition in an environment with lower air content. The resulting PEO‐like coatings are stable and antifouling for an antibody solution and inhibit adhesion of human fibroblast cells.

Efficacy of argon cold atmospheric pressure plasma jet on hospital surface decontamination and its impact on the surface property

The emergence of antimicrobial resistance has become a major contributor to healthcare-associated infections. Recently, the cold atmospheric pressure plasma jet (CAPJ) discharges have garnered attention of the researchers globally for their novel antimicrobial property. This research evaluated the effectiveness of an in-house developed CAPJ on the inactivation of multidrug-resistant (MDR) E. coli and S. aureus artificially inoculated over stainless steel and aluminium test surfaces. A greater than ∼5 log10 reduction of E. coli, whereas reduction of ∼3.4–4.6 log10 for S. aureus on the test surfaces was achieved on 180 s CAPJ exposure. Extremely low D- values (in the range of ∼27–63 s) were recorded for both isolates. In addition, this study assessed the impact of repeated CAPJ exposure on surface property, by replicating the process of hospital surface decontamination. Surface properties such as wettability, roughness, and elemental composition varied non-linearly on repetitive Ar CAPJ exposure on test surfaces. It was observed that the identified gas-phase species such as excited atoms (Ar I, and O I), positive ions (NO+, O2 +, OH+, O+, N2 +, Ar+, etc), negative ions (N2O2 −, N2O3 −, NO3 −, NO2 −, etc), radical RONS (OH•), and non-radical RONS (O I, NO+, OH+, N2O3 −, NO3 −, NO2 −, etc) would contribute to bacterial load reduction on the test surface along with any alteration in surface characteristic. There may be chemical and physical processes involved in the above activity. This investigation into understanding the effects of CAPJ surface decontamination on surface properties would aid in determining its potential applications in healthcare settings.