Coincidence Spectroscopy Research Articles

Catalytic pyrolysis mechanism of lignin moieties driven by aldehyde, hydroxyl, methoxy, and allyl functionalization: the role of reactive quinone methide and ketene intermediates.

The catalytic pyrolysis of guaiacol-based lignin monomers, vanillin, syringol, and eugenol over commercial HZSM-5 has been investigated using operando Photoelectron Photoion Coincidence (PEPICO) spectroscopy to unveil the reaction mechanism by detecting reactive intermediates, such as quinone methides and ketenes, and products. Vanillin shares the decomposition mechanism with guaiacol due to prompt and efficient decarbonylation, which allows us to control this reaction leading to a phenol selectivity increase by switching to a faujasite catalyst and decreasing the Si/Al ratio. Syringol first demethylates to 3-methoxycatechol, which mainly dehydroxylates to o- and m-guaiacol. Ketene formation channels over HZSM-5 are less important here than for guaiacol or vanillin, but product distributionremains similar. C3 addition to guaiacol yields eugenol, which shows a more complex product distribution upon catalytic pyrolysis. By analogies to monomers with simplified functionalization, namely allylbenzene, 4-allylcatechol, and 4-methylcatechol, the eugenol chemistry could be fully resolved. Previously postulated reactive semi-quinone intermediates are detected spectroscopically, and their involvement opens alternative pathways to condensation and phenol formation. Allyl groups, produced by dehydroxylation of the β-O-4 bond, may not only decompose via C1/C2/C3 loss, but also cyclize to indene and its derivatives over HZSM-5. This comparably high reactivity leads to an unselective branching of the chemistry and to a complex product distribution, which is difficult to control. Indenes and naphthalenes are also prototypical coke precursors efficiently deactivating the catalyst. We rely on these mechanistic insights to discuss strategies to fine-tune process conditions to increase the selectivities of desired products by enhancing either vanillin and guaiacol or supressing eugenol yields from native lignin.

Enhanced Surface Determination beyond Photoemission via Auger Photoelectron Coincidence Spectroscopy.

The study of surface properties at the nanoscale plays a crucial role in material science applications. This paper demonstrates the capabilities of Auger PhotoElectron Coincidence Spectroscopy (APECS) to obtain data with varying surface sensitivities from a single measurement. This makes it possible to extract the spectrum from the outermost surface layer even when faced with strongly overlapping surface and bulk spectral features, which we demonstrate by accurately extracting the surface component in Au 4f photoemission. Leveraging high energy resolution, transmission efficiency, tunable photon energy, and remarkable surface sensitivity of the APECS setup, we propose that optimal experimental conditions can be tailored to determine surface spectra accurately for a diverse range of materials. This opens new avenues for advancing our understanding of nanoscale surface phenomena across various material systems.

The Unimolecular Decomposition Mechanism of Trimethyl Phosphate.

Trimethyl phosphate (TMP), an organophosphorus compound (OPC), is a promising fire-retardant candidate for lithium-ion battery (LIB) electrolytes to mitigate fire spread. This study aims to understand the mechanism of TMP unimolecular thermal decomposition to support the integration of a TMP chemical kinetic model into a LIB electrolyte surrogate model. Reactive intermediates and products of TMP thermal decomposition were experimentally detected using vacuum ultraviolet (VUV) synchrotron radiation and double imaging photoelectron photoion coincidence (i2PEPICO) spectroscopy. Phosphorus-containing intermediates such as PO, HPO and HPO2 were identified. Sampling effects could successfully be obviated thanks to photoion imaging, which also showed evidence for isomerization reactions upon wall collisions in the ionization chamber. Quantum chemical calculations performed for the unimolecular decomposition of TMP revealed for the first time that isomerization channels via hydrogen and methyl transfer (barrier heights of 65.9 and 72.6 kcal/mol, respectively) are the lowest-energy primary steps of TMP decomposition followed by CH3OH/CH3/CH2O or dimethyl ether (DME) production, respectively. We found an analogous DME production channel in the unimolecular decomposition of dimethyl methylphosphonate (DMMP), another important OPC fire-retardant additive with a similar molecular structure to TMP, which are not included in currently available chemical kinetic models.

A solution for 4-propylguaiacol hydrodeoxygenation without ring saturation

We investigate solvent effects in the hydrodeoxygenation of 4-propylguaiacol (4PG, 166 amu), a key lignin-derived monomer, over Ru/C catalyst by combined operando synchrotron photoelectron photoion coincidence (PEPICO) spectroscopy and molecular dynamics simulations. With and without isooctane co-feeding, ring-hydrogenated 2-methoxy-4-propylcyclohexanol (172 amu) is the first product, due to the favorable flat adsorption configuration of 4PG on the catalyst surface. In contrast, tetrahydrofuran (THF)—a polar aprotic solvent that is representative of those used for lignin solubilization and upgrading—strongly coordinates to the catalyst surface at the oxygen atom. This induces a local steric hindrance, blocking the flat adsorption of 4PG more effectively, as it needs more Ru sites than the tilted adsorption configuration revealed by molecular dynamics simulations. Therefore, THF suppresses benzene ring hydrogenation, favoring a demethoxylation route that yields 4-propylphenol (136 amu), followed by dehydroxylation to propylbenzene (120 amu). Solvent selection may provide new avenues for controlling catalytic selectivity.

Recent Progress on the Involvement of Formaldehyde in the Methanol-to-Hydrocarbons Reaction.

The conversion of methanol-to-hydrocarbons (MTH) over zeolite catalysts has been the subject of intense research since its discovery. Great effort has been devoted to the investigation of four key topics: the initiation of C-C bonds, the establishment of hydrocarbon pool (HCP), the adjustment of product selectivity, and the deactivation process of catalysts. Despite 50 years of study, some mechanisms remain controversial. However, an intermediate species, formaldehyde (HCHO), has recently garnered considerable attention for its influence on the entire MTH process. The discovery of HCHO and its significant role in the MTH process has been facilitated by the application of in situ analytical techniques, such as synchrotron radiation photoionization mass spectrometry (SR-PIMS) and photoelectron photoion coincidence spectroscopy (PEPICO). It is now revealed that HCHO is involved in the initiation, propagation, and termination process of MTH reaction. Such mechanistic understanding of HCHO's involvement has provided valuable insights for optimizing the MTH process.

PEPICO analysis of catalytic reactor effluents towards quantitative isomer discrimination: DME conversion over a ZSM-5 zeolite.

The methanol-to-hydrocarbons (MTH) process involves the conversion of methanol, a C1 feedstock that can be produced from green sources, into hydrocarbons using shape-selective microporous acidic catalysts - zeolite and zeotypes. This reaction yields a complex mixture of species, some of which are highly reactive and/or present in several isomeric forms, posing significant challenges for effluent analysis. Conventional gas-phase chromatography (GC) is typically employed for the analysis of reaction products in laboratory flow reactors. However, GC is not suitable for the detection of highly reactive intermediates such as ketene or formaldehyde and is not suitable for kinetic studies under well defined low pressure conditions. Photoelectron-photoion coincidence (PEPICO) spectroscopy has emerged as a powerful analytical tool for unraveling complex compositions of catalytic effluents, but its availability is limited to a handful of facilities worldwide. Herein, PEPICO analysis of catalytic reactor effluents has been implemented at the FinEstBeAMS beamline of MAX IV Laboratory. The conversion of dimethyl ether (DME) on a zeolite catalyst (ZSM-5-MFI27) is used as a prototypical model reaction producing a wide distribution of hydrocarbon products. Since in zeolites methanol is quickly equilibrated with DME, this reaction can be used to probe vast sub-networks of the full MTH process, while eliminating or at least slowing down methanol-induced secondary reactions and catalyst deactivation. Quantitative discrimination of xylene isomers in the effluent stream is achieved by deconvoluting the coincidence photoelectron spectra.

Absolute Activity Measurement of 125I Seed Brachytherapy by Two-dimensional Photon-photon Coincidence Spectroscopy

Absolute Activity Measurement of 125I Seed Brachytherapy by Two-dimensional Photon-photon Coincidence Spectroscopy

X-ray radiation damage cycle of solvated inorganic ions

X-ray-induced damage is one of the key topics in radiation chemistry. Substantial damage is attributed to low-energy electrons and radicals emerging from direct inner-shell photoionization or produced by subsequent processes. We apply multi-electron coincidence spectroscopy to X-ray-irradiated aqueous solutions of inorganic ions to investigate the production of low-energy electrons (LEEs) in a predicted cascade of intermolecular charge- and energy-transfer processes, namely electron-transfer-mediated decay (ETMD) and interatomic/intermolecular Coulombic decay (ICD). An advanced coincidence technique allows us to identify several LEE-producing steps during the decay of 1s vacancies in solvated Mg2+ ions, which escaped observation in previous non-coincident experiments. We provide strong evidence for the predicted recovering of the ion’s initial state. In natural environments the recovering of the ion’s initial state is expected to cause inorganic ions to be radiation-damage hot spots, repeatedly producing destructive particles under continuous irradiation.

Gamma-gamma coincidence spectroscopy analysis with cascade summing corrections in close counting geometries

Gamma-gamma coincidence spectroscopy is a highly effective technique that becomes more challenging to implement when the distance between the detector and the sample is reduced. This difficulty arises due to cascade summing, which can complicate the acquisition of efficiency curves and introduce uncertainties, especially when using common sources like 152Eu. To address this issue, a method for correcting coincidence summing in close counting geometries is presented in this study. The approach utilizes MCNPX-Polimi and MCNP6.2, along with a 152Eu source calibration source for verification and validation. Additionally, the use of high purity germanium (HPGe) detectors coupled with Lynx digital signal analyzers (DSAs) for gamma-gamma coincidence is discussed. This work also outlines the generation, processing, and handling of time-stamped list (TLIST) mode data for dead-time corrections and coincidence gating.

Experimental Realization of Auger Decay in the Field of a Positive Elementary Charge.

Auger electron spectroscopy is an omnipresent experimental tool in many fields of fundamental research and applied science. The determination of the kinetic energies of the Auger electrons yields information about the element emitting the electron and its chemical environment at the time of emission. Here, we present an experimental approach to determine Auger spectra for emitter sites in the vicinity of a positive elementary charge based on electron-electron-electron and electron-electron-photon coincidence spectroscopy. We observe a characteristic redshift of the Auger spectrum caused by the Coulomb interaction with the charged environment. Our results are relevant for the interpretation of Auger spectra of extended systems like large molecules, clusters, liquids, and solids, in particular in high-intensity radiation fields which are nowadays routinely available, e.g., at x-ray free-electron laser facilities. The effect has been widely ignored in the literature so far, and some interpretations of Auger spectra from clusters might need to be revisited.

Photoionization and Dissociative Photoionization of Acetaldehyde in the 10.0-13.7 eV Range by Synchrotron Photoelectron Photoion Coincidence Spectroscopy.

Photoionization and dissociative photoionization of acetaldehyde (CH3CHO) in the 10.0-13.7 eV energy range are studied by using synchrotron radiation double imaging photoelectron photoion coincidence spectroscopy (i2PEPICO). The X2A' and A2A" electronic states of CH3CHO+ as well as the Franck-Condon gap region between these two states have been populated with several vibrational sequences and assigned in the high-resolution slow photoelectron spectrum (SPES). The adiabatic ionization energies (AIEs) of the X2A' and A2A" states are measured at 10.228±0.006 and 12.52±0.05 eV, respectively. The present results show that the X2A' state is a stable state while the A2A" state is fully dissociative to produce CH3CO+, CHO+ and CH4 + fragment ions. The 0 K appearance energies (AE0K) of CH3CO+ and CHO+ fragment ions are determined through the modeling of the breakdown diagram, i. e., AE0K(CH3CO+)=10.89±0.01 eV (including a reverse barrier of ~0.19 eV) and AE0K(CHO+)=11.54±0.05 eV. In addition, the dissociation mechanisms of CH3CHO+ including statistical dissociation, direct bond breaking and isomerization are discussed with the support of the calculated dissociation limits and transition state energies.

State-selective dissociative double ionization of CH3I and CH2I2 via I 4d core-hole states studied by multi-electron-ion coincidence spectroscopy.

The dissociative double ionization of CH3I and CH2I2 irradiated with extreme ultraviolet light at hv = 100eV is investigated by multi-electron-ion coincidence spectroscopy using a magnetic bottle type electron spectrometer. The spin-orbit state-resolved Auger electron spectra for the I 4d core-hole states, (I 4d3/2)-1 and (I 4d5/2)-1, provide clear identifications of electronic states of CH3I2+ and CH2I22+. The dominant ion species produced after the double ionization correlate with the Auger electron energy, showing that different fragmentation pathways are open depending on the electronic states populated by the Auger decay. Theoretical calculations are performed to understand the fragmentation from the doubly charged states and the observed spin-orbit specificity in the Auger decay.

A Blyholder mechanism in the chemisorption of N2O on Ni(111) – studied with Auger-photoelectron coincidence spectroscopy

In heterogeneous catalysis the surface-adsorbate bond strength is critical for the function of the system. Here we study a series consisting of multilayer, bilayer and monolayer N2O on Ni(111) and employ Auger-photoelectron coincidence spectroscopy (APECS) to study the interaction between the molecule and the substrate directly. We observe intensity in the nitrogen Auger spectra that arise from the interaction between molecule and surface (not observed in free molecules) whereas the oxygen spectra are thickness-independent. Since the two nitrogen atoms of N2O are chemically inequivalent we can assign the intensity present in the bilayer and monolayer cases to orbitals centered on the terminal nitrogen which is closest to the Ni(111) surface. Using ab initio, molecular dynamics and solid-state density functional theory calculations we infer a Blyholder model of the surface bond as consisting of donation from the terminal nitrogen lone-pair valence orbital with back-donation from the metal into the unoccupied orbitals on that nitrogen. This coincidence technique can readily be used to study substrate–adsorbate interactions directly with chemical and orbital specificity — this opens up prospects to study fundamental steps of molecular adsorption and heterogeneous catalysis with unprecedented detail.

Auger photoelectron coincidence spectroscopy of molecules adsorbed on a gold wire surface

In this paper, we present the results on Auger/photoelectron coincidence spectroscopy (APECS) of molecules—propanethiol and bovine serum albumin (BSA)-deposited on a gold wire surface, using a magnetic bottle electron time-of-flight spectrometer. Although this study is preliminary and conducted under low vacuum (∼10−7 mbar) conditions in comparison to surface science standards, it demonstrates the APECS methods high efficiency in probing complex molecules. We also establish its versatility and potential for easy extension to other various systems.

CO Cofeeding Affects Product Distribution in CH3Cl Coupling over ZSM‐5 Zeolite: Pressure Twists the Plot

AbstractC1 coupling reactions over zeolite catalysts are central to sustainable chemical production strategies. However, questions persist regarding the involvement of CO in ketene formation, and the impact of this elusive oxygenate intermediate on reactivity patterns. Using operando photoelectron photoion coincidence spectroscopy (PEPICO), we investigate the role of CO in methyl chloride conversion to hydrocarbons (MCTH), a prospective process for methane valorization with a reaction network akin to methanol to hydrocarbons (MTH) but without oxygenate intermediates. Our findings reveal the transformative role of CO in MCTH at the low pressures, inducing ketene formation in MCTH and boosting olefin production, confirming the Koch carbonylation step in the initial stages of C1 coupling. We uncover pressure‐dependent product distributions driven by CO‐induced ketene formation, and its subsequent desorption from the zeolite surface, which is enhanced at low pressure. Inspired by the above results, extension of the co‐feeding approach to CH3OH as another simple oxygenate showcases the additional potential for improved catalyst stability in MCTH at ambient pressure.

CO Cofeeding Affects Product Distribution in CH3Cl Coupling over ZSM-5 Zeolite: Pressure Twists the Plot.

C1 coupling reactions over zeolite catalysts are central to sustainable chemical production strategies. However, questions persist regarding the involvement of CO in ketene formation, and the impact of this elusive oxygenate intermediate on reactivity patterns. Using operando photoelectron photoion coincidence spectroscopy (PEPICO), we investigate the role of CO in methyl chloride conversion to hydrocarbons (MCTH), a prospective process for methane valorization with a reaction network akin to methanol to hydrocarbons (MTH) but without oxygenate intermediates. Our findings reveal the transformative role of CO in MCTH at the low pressures, inducing ketene formation in MCTH and boosting olefin production, confirming the Koch carbonylation step in the initial stages of C1 coupling. We uncover pressure-dependent product distributions driven by CO-induced ketene formation, and its subsequent desorption from the zeolite surface, which is enhanced at low pressure. Inspired by the above results, extension of the co-feeding approach to CH3OH as another simple oxygenate showcases the additional potential for improved catalyst stability in MCTH at ambient pressure.

Conformer-Specific Photoelectron Spectroscopy of Carbonic Acid: H2CO3.

Carbonic acid (H2CO3) is a fundamental species in biological, ecological, and astronomical systems. However, its spectroscopic characterization is incomplete because of its reactive nature. The photoionization (PI) and the photoion mass-selected threshold photoelectron (ms-TPE) spectra of H2CO3 were obtained by utilizing vacuum ultraviolet (VUV) synchrotron radiation and double imaging photoelectron photoion coincidence spectroscopy. Two carbonic acid conformers, namely, cis-cis and cis-trans, were identified. Experimental adiabatic ionization energies (AIEs) of cis-cis and cis-trans H2CO3 were determined to be 11.27 ± 0.02 and 11.18 ± 0.03 eV, and the cation enthalpies of formation could be derived as ΔfH°0K = 485 ± 2 and 482 ± 3 kJ mol-1, respectively. The cis-cis conformer shows intense peaks in the ms-TPES that are assigned to the C=O/C-OH stretching mode, while the cis-trans conformer exhibits a long progression to which two C=O/C-OH stretching modes contribute. The TPE spectra allow for the sensitive and conformer-selective detection of carbonic acid in terrestrial experiments to better understand astrochemical reactions.

Vacuum Ultraviolet Single Photon Ionization and Decomposition of 2-Aminopropionitrile in Astrophysical Objects

The molecule 2-aminopropionitrile (2-APN; H3CCH(NH2)CN) is a chiral precursor of the amino acid alanine and could play an important role in the emergence of the homochirality of life. To date, 2-APN has not yet been detected in the interstellar medium. To address the question of its absence, possibly through destruction by vacuum ultraviolet radiation in astrophysical media, we studied its photoionization and dissociative photoionization in the 9–14 eV (89–137 nm) energy range using photoelectron–photoion coincidence spectroscopy with velocity map imaging. Density functional theory calculations were performed at the PBE0/aug-cc-pVTZ level to determine structures for the various cationic fragments identified experimentally. Their appearance energies were calculated. The adiabatic ionization energy (AIE) of 2-APN is AIE = (9.85±0.01) eV and the appearance energy (AE) of the major fragment ion N≡CC(H)NH2 + is AE = (10.57±0.01) eV. Both ions, 2-APN+ and N≡CC(H)NH2 +, make up more than 90% of the formed ions. N≡CC(H)NH2 +, an isomer of the protonated HCN dimer, is also formed with high yield in the dissociative photoionization of aminoacetonitrile (NH2CH2CN), another α-aminonitrile observed in Sgr B2(N). Photoion yield spectra have been calibrated to absolute ionization cross sections. From these, we derive photoionization rates in several typical radiation fields relevant to different astrophysical objects. The rates show that, under almost all explored radiation fields, dissociative ionization is the dominant pathway for photoionization, leading to the loss of a methyl group (CH3) to form the planar thermodynamically stable amino cyano methylidynium ion N≡CC(H)NH2 +. The observed absence of 2-APN in Sgr B2 could thus be due to dominant dissociative photoionization.

Gas Phase Ionization Energy of Heptacene.

The ionization energy is a fundamental property that is relevant to charge transport in organic semiconductors. We report adiabatic ionization energies (AIEs) of heptacene at 6.21 and 7.20 eV for the X̃+B2g and Ã+Au states, respectively, as the next larger member of the acene series using mass- and isomer-selective double imaging photoelectron photoion coincidence spectroscopy. The X̃+ state energy decreases monotonically with an increase in size within the homologous series of acenes and approaches an asymptotic limit [AIE(polyacene) = 5.94 ± 0.06 eV] based on a fit with an exponential decay function. As byproducts of heptacene formation from cycloreversion of diheptacenes, 5,18-, 7,16-, and 6,17-dihydroheptacene can be detected, and their AIE is similar to that of their largest acene subunit (anthracene and tetracene, respectively), in very good agreement with computational treatments.

Time-Resolved Multielectron Coincidence Spectroscopy of Double Auger-Meitner Decay Following Xe 4d Ionization.

We introduce time-resolved multielectron coincidence spectroscopy and apply it to the double Auger-Meitner (AM) emission process following xenon 4d photoionization. The photoelectron and AM electron(s) are measured in coincidence by using a magnetic-bottle time-of-flight spectrometer, enabling an unambiguous assignment of the complete cascade pathways involving two AM electron emissions. In the presence of a near-infrared (NIR) laser pulse, the intermediate Xe^{2+*} state embedded in the Xe^{3+} continuum is probed through single NIR photon absorption and the lifetime of this intermediate Xe^{2+*} state is directly obtained as (109±22) fs.