Coiled-coil Dimers Research Articles

A nanobody toolbox targeting dimeric coiled-coil modules for functionalization of designed protein origami structures

Coiled-coil (CC) dimers are widely used in protein design because of their modularity and well-understood sequence-structure relationship. In CC protein origami design, a polypeptide chain is assembled from a defined sequence of CC building segments that determine the self-assembly of protein cages into polyhedral shapes, such as the tetrahedron, triangular prism, or four-sided pyramid. However, a targeted functionalization of the CC modules could significantly expand the versatility of protein origami scaffolds. Here, we describe a panel of single-chain camelid antibodies (nanobodies) directed against different CC modules of a de novo designed protein origami tetrahedron. We show that these nanobodies are able to recognize the same CC modules in different polyhedral contexts, such as isolated CC dimers, tetrahedra, triangular prisms, or trigonal bipyramids, thereby extending the ability to functionalize polyhedra with nanobodies in a desired stoichiometry. Crystal structures of five nanobody-CC complexes in combination with small-angle X-ray scattering show binding interactions between nanobodies and CC dimers forming the edges of a tetrahedron with the nanobody entering the tetrahedral cavity. Furthermore, we identified a pair of allosteric nanobodies in which the binding to the distant epitopes on the antiparallel homodimeric APH CC is coupled via a strong positive cooperativity. A toolbox of well-characterized nanobodies specific for CC modules provides a unique tool to target defined sites in the designed protein structures, thus opening numerous opportunities for the functionalization of CC protein origami polyhedra or CC-based bionanomaterials.

The dimeric Golgi protein Gorab binds to Sas6 as a monomer to mediate centriole duplication.

The duplication and ninefold symmetry of the Drosophila centriole requires that the cartwheel molecule, Sas6, physically associates with Gorab, a trans-Golgi component. How Gorab achieves these disparate associations is unclear. Here, we use hydrogen-deuterium exchange mass spectrometry to define Gorab's interacting surfaces that mediate its subcellular localization. We identify a core stabilization sequence within Gorab's C-terminal coiled-coil domain that enables homodimerization, binding to Rab6, and thereby trans-Golgi localization. By contrast, part of the Gorab monomer's coiled-coil domain undergoes an antiparallel interaction with a segment of the parallel coiled-coil dimer of Sas6. This stable heterotrimeric complex can be visualized by electron microscopy. Mutation of a single leucine residue in Sas6's Gorab-binding domain generates a Sas6 variant with a sixteenfold reduced binding affinity for Gorab that cannot support centriole duplication. Thus, Gorab dimers at the Golgi exist in equilibrium with Sas6-associated monomers at the centriole to balance Gorab's dual role.

Abstract 5933: Biochemical characterization of FGFR2-PPHLN1 and BCR-FGFR1, drivers of epithelial and hematological malignancies

Abstract Fibroblast growth factor receptors (FGFRs) are part of the receptor tyrosine kinase (RTK) family and are essential in the activation of various downstream signaling pathways, which are necessary for cell differentiation and proliferation. However, mutation and translocation of FGFRs leads to aberrant activation of signaling, which often results in cancer. This work focuses on the FGFR2-PPHLN1 fusion protein, a driver of intrahepatic cholangiocarcinoma (ICC), and the BCR-FGFR1 fusion protein, a driver of stem cell leukemia/lymphoma (SCLL). Both FGFR2-PPHLN1 and BCR-FGFR1 are poorly characterized, resulting in few therapies and clinical advancements for patients positive for these oncogene-driven neoplasms. Here, we aim to characterize these two FGFR fusion proteins, and analyze therapeutic options to treat these malignancies. Both FGFR2-PPHLN1 and BCR-FGFR1 contain a coiled-coil dimerization domain fused to a constitutively activated kinase provided by either FGFR2 or FGFR1, respectively. This work shows the reliance of these FGFR fusion proteins on the tyrosine kinase activity of the respective FGFR, as kinase dead mutants were not biologically active. Additionally both FGFR2-PPHLN1 and BCR-FGFR1 expressing cells exhibited an over activation of the RAS/MAPK and JAK/STAT pathways, indicating the importance of these pathways in FGFR1-PPHLN1 driven ICC, and BCR-FGFR1 driven SCLL, respectively. Transformed cells expressing FGFR2-PPHLN1 are sensitive to FGFR inhibitor BGJ398. However, this sensitivity is abolished when a kinase activating mutation is introduced with FGFR2(N549K)-PPHLN1. Residue N549 in the FGFR2 kinase domain functions as part of a molecular brake; mutation of this residue disrupts the auto-inhibitory network of hydrogen bonds, leading to increased kinase activation. The loss in sensitivity to BJG398 treatment for cells expressing FGFR2(N549K)-PPHLN1 indicates that BGJ398 treatment alone may be ineffective once secondary mutations are established in the kinase domain. Preliminary data suggests that transformed cells expressing either FGFR2-PPHLN1, or kinase activated FGFR2(N549K)-PPHLN1, may be sensitive to treatment with FGFR inhibitor TAS-120, suggesting that TAS-120 treatment could be beneficial for patients with FGFR2-PPHLN1 driven ICC. Furthermore, we establish BCR-FGFR1 as a client of the Hsp90 chaperone complex. Transformed cells expressing BCR-FGFR1 are sensitive to the Hsp90 inhibitor, Ganetespib, and also respond to combined treatment with Ganetespib and FGFR inhibitor BGJ398, suggesting novel clinical treatment options for patients positive for this fusion. Collectively, we show that the tyrosine kinase activity provided by FGFR2 or FGFR1, respectively is required for the biological activity of these fusion proteins, and we establish novel treatment options for patients with FGFR2-PPHLN1 or BCR-FGFR1 driven malignancies. Citation Format: Malalage Nicole Peiris, Fangda Li, April N. Meyer, Dalida Warda, Daniel J. Donoghue. Biochemical characterization of FGFR2-PPHLN1 and BCR-FGFR1, drivers of epithelial and hematological malignancies [abstract]. In: Proceedings of the Annual Meeting of the American Association for Cancer Research 2020; 2020 Apr 27-28 and Jun 22-24. Philadelphia (PA): AACR; Cancer Res 2020;80(16 Suppl):Abstract nr 5933.

Addressing the Molecular Mechanism of Longitudinal Lamin Assembly Using Chimeric Fusions.

The molecular architecture and assembly mechanism of intermediate filaments have been enigmatic for decades. Among those, lamin filaments are of particular interest due to their universal role in cell nucleus and numerous disease-related mutations. Filament assembly is driven by specific interactions of the elementary dimers, which consist of the central coiled-coil rod domain flanked by non-helical head and tail domains. We aimed to investigate the longitudinal ‘head-to-tail’ interaction of lamin dimers (the so-called ACN interaction), which is crucial for filament assembly. To this end, we prepared a series of recombinant fragments of human lamin A centred around the N- and C-termini of the rod. The fragments were stabilized by fusions to heterologous capping motifs which provide for a correct formation of parallel, in-register coiled-coil dimers. As a result, we established crystal structures of two N-terminal fragments one of which highlights the propensity of the coiled-coil to open up, and one C-terminal rod fragment. Additional studies highlighted the capacity of such N- and C-terminal fragments to form specific complexes in solution, which were further characterized using chemical cross-linking. These data yielded a molecular model of the ACN complex which features a 6.5 nm overlap of the rod ends.

Structural basis of self-assembly in the lipid-binding domain of mycobacterial polar growth factor Wag31.

Wag31, or DivIVA, is an essential protein and a drug target in the human pathogen Mycobacterium tuberculosis that self-assembles at the negatively curved membrane surface to form a higher-order structural scaffold, maintains rod-shaped cellular morphology and localizes key cell-wall synthesizing enzymes at the pole for exclusive polar growth. The crystal structure of the N-terminal lipid-binding domain of mycobacterial Wag31 was determined at 2.3 Å resolution. The structure revealed a highly polar surface lined with several conserved charged residues that suggest probable sites for interactions with membrane lipids. Crystal-packing analysis revealed a previously unseen 'dimer-of-dimers' assembly state of N-terminal Wag31, which is formed by antiparallel stacking of two coiled-coil dimers. Size-exclusion column-chromatography-coupled small-angle solution X-ray scattering data revealed a tetrameric form as a major assembly state of N-terminal Wag31 in solution, further supporting the crystal structure. The results suggest that, in addition to lipid binding, the N-terminal Wag31 can participate in self-assembly to form filamentous structures. Plausible models of linear self-assembly and branching of Wag31 filaments consistent with available data are suggested.

Metabolic enzyme clustering by coiled coils improves the biosynthesis of resveratrol and mevalonate

The clustering of biosynthetic enzymes is used in nature to channel reaction products and increase the yield of compounds produced by multiple reaction steps. The coupling of multiple enzymes has been shown to increase the biosynthetic product yield. Different clustering strategies have particular advantages as the spatial organization of multiple enzymes creates biocatalytic cascades with a higher efficiency of biochemical reaction. However, there are also some drawbacks, such as misfolding and the variable stability of interaction domains, which may differ between particular biosynthetic reactions and the host organism. Here, we compared different protein-based clustering strategies, including direct fusion, fusion mediated by intein, and noncovalent interactions mediated through small coiled-coil dimer-forming domains. The clustering of enzymes through orthogonally designed coiled-coil interaction domains increased the production of resveratrol in Escherichia coli more than the intein-mediated fusion of biosynthetic enzymes. The improvement of resveratrol production correlated with the stability of the coiled-coil dimers. The coiled-coil fusion-based approach also increased mevalonate production in Saccharomyces cerevisiae, thus demonstrating the wider applicability of this strategy.

Synthesis and Characterization of a Leucine-Based Block Co-Polypeptide: The Effect of the Leucine Zipper on Self-Assembly.

The self-assembly behavior of an ABC triblock copolypeptide consisting of poly(ethylene oxide-b-(leucine-s-valine)-b-lysine) (PEO-PLV-PK) was examined via dynamic light scattering in dilute aqueous solution. Leucine is a hydrophobic, α-helix forming polypeptide that exhibits a "zipper effect" in coiled-coil dimers. We hypothesize that the specific interaction afforded by the leucine zipper dominates the thermodynamics of self-assembly through the side-by-side ordering of α-helices, which drives vesicle formation in a polymer with only 6 wt % hydrophobic content. Additionally, a multitude of assembly sizes and morphologies were attainable from a single polymer, depending on the solution processing method. Thermodynamic effects of the leucine zipper can be interpreted, in part, from solubility parameters determined from molecular modeling. The combination of synthesis, solvent processing, and computational studies helps to elucidate the thermodynamic effects of this unique assembly motif on classical self-assembly processes.

Identification of a Structurally Dynamic Domain for Oligomer Formation in Rootletin

Rootletin is the main component of the ciliary rootlet and functions as a centriole linker connecting the two mother centrioles. Despite the functional importance of rootletin, the molecular architecture of the rootletin filament and its assembly mechanism are poorly understood. Here, we identify the coiled-coil domain 3 (CCD3) of rootletin as the key domain for its cellular function. The crystal structure of the CCD31108–1317 fragment containing 28 heptad repeats and 1 hendecad repeat reveals that it forms a parallel coiled-coil dimer spanning approximately 300 Å in length. Crosslinking experiments and biophysical analyses of the minimal functional region of CCD3 (CCD3–6) suggest that CCD3–6 is structurally dynamic and may be important for oligomer formation. We also show that oligomerization-defective CCD3 mutants fail in centrosomal localization and centriole linkage, suggesting that rootletin oligomerization may be important for its function.

Solution Structural Behavior of UBAN Domains Revealed by Coarse‐Grained Computer Simulations

Proteins containing a Ubiquitin‐binding domain in ABIN and NEMO (UBAN) have a broad range of biological roles. Much of the control of ubiquitin recognition by individual UBAN‐domain containing proteins is based on protein structure. Ubiquitin recognition is further modulated by post‐translational modifications. X‐ray crystal structures of UBAN domains display coiled‐coil dimers in the absence or presence of M1‐linked ubiquitin. However, the solution structural behavior of these UBAN domains is not well understood. Extensive coarse‐grained molecular dynamics simulations of UBAN domains from NEMO, optineurin (OPTN), CEP55, and ABIN1 using a predictive energy landscape based model reveal unique signatures of solution structural conformational heterogeneity in NEMO and ABIN1 but a much more homogeneous distribution of highly extended OPTN conformations. Simulating phosphorylation of OPTN S473, a known post‐translational modification that increases M1‐linked ubiquitin affinity for OPTN, greatly increases OPTN conformational heterogeneity. Furthermore, phosphorylation of ABIN1 S442, a likely post‐translational modification in vivo, shifts the ABIN1 conformational distribution. These results indicate the conformational distribution of UBAN domains provides a means to tailor cellular response in specific biological roles, and post‐translational modifications in combination with conformational heterogeneity provide a rheostat‐like means to control cellular signaling pathways.Support or Funding InformationThis work was supported by internal funding from the University of Connecticut to James Halpert.

Structure-based group A streptococcal vaccine design: Helical wheel homology predicts antibody cross-reactivity among streptococcal M protein–derived peptides

Group A streptococcus (Strep A) surface M protein, an α-helical coiled-coil dimer, is a vaccine target and a major determinant of streptococcal virulence. The sequence-variable N-terminal region of the M protein defines the M type and also contains epitopes that promote opsonophagocytic killing of streptococci. Recent reports have reported considerable cross-reactivity among different M types, suggesting the prospect of identifying cross-protective epitopes that would constitute a broadly protective multivalent vaccine against Strep A isolates. Here, we have used a combination of immunological assays, structural biology, and cheminformatics to construct a recombinant M protein-based vaccine that included six Strep A M peptides that were predicted to elicit antisera that would cross-react with an additional 15 nonvaccine M types of Strep A. Rabbit antisera against this recombinant vaccine cross-reacted with 10 of the 15 nonvaccine M peptides. Two of the five nonvaccine M peptides that did not cross-react shared high sequence identity (≥50%) with the vaccine peptides, implying that high sequence identity alone was insufficient for cross-reactivity among the M peptides. Additional structural analyses revealed that the sequence identity at corresponding polar helical-wheel heptad sites between vaccine and nonvaccine peptides accurately distinguishes cross-reactive from non-cross-reactive peptides. On the basis of these observations, we developed a scoring algorithm based on the sequence identity at polar heptad sites. When applied to all epidemiologically important M types, this algorithm should enable the selection of a minimal number of M peptide-based vaccine candidates that elicit broadly protective immunity against Strep A.

Post-ER Stress Biogenesis of Golgi Is Governed by Giantin.

Background: The Golgi apparatus undergoes disorganization in response to stress, but it is able to restore compact and perinuclear structure under recovery. This self-organization mechanism is significant for cellular homeostasis, but remains mostly elusive, as does the role of giantin, the largest Golgi matrix dimeric protein. Methods: In HeLa and different prostate cancer cells, we used the model of cellular stress induced by Brefeldin A (BFA). The conformational structure of giantin was assessed by proximity ligation assay and atomic force microscopy. The post-BFA distribution of Golgi resident enzymes was examined by 3D SIM high-resolution microscopy. Results: We detected that giantin is rather flexible than an extended coiled-coil dimer and BFA-induced Golgi disassembly was associated with giantin monomerization. A fusion of the nascent Golgi membranes after BFA washout is forced by giantin re-dimerization via disulfide bond in its luminal domain and assisted by Rab6a GTPase. GM130-GRASP65-dependent enzymes are able to reach the nascent Golgi membranes, while giantin-sensitive enzymes appeared at the Golgi after its complete recovery via direct interaction of their cytoplasmic tail with N-terminus of giantin. Conclusion: Post-stress recovery of Golgi is conducted by giantin dimer and Golgi proteins refill membranes according to their docking affiliation rather than their intra-Golgi location.

Retention of Coiled-Coil Dimer Formation in the Absence of Ion Pairing at Positions Flanking the Hydrophobic Core.

Hydrophobic interactions govern how proteins fold and interact with other molecules, but the impact of nearby polar functionality on the effective hydrophobicity of nonpolar surfaces remains unclear. Here we use a common protein quaternary structure motif, the parallel coiled-coil dimer, to ask whether the identity of basic residues (arginine vs lysine; guanidinium vs ammonium) arrayed along one side of the constituent α-helices influences the favorability of dimerization driven by burial of hydrophobic surface on the other side of each helix. Significant sequence redesign was necessary to achieve the desired juxtaposition of nonpolar and cationic functionality, because we needed to eliminate charged side chains from positions flanking the nonpolar helix surface. Natural and designed sequences that form coiled coils are almost universally rich in acidic and basic residues at these flanking positions. Our arginine coiled-coil dimer was moderately more stable than the lysine analogue, which contrasts with behavior previously observed with helical β-amino acid oligomers bearing guanidinium versus ammonium groups. We attribute this backbone-dependent difference to variations in the extent to which the helical propensities of α- and β-residues can be modulated by design. These findings highlight the challenge of identifying noncovalent forces that direct structure formed by a flexible backbone.

14-3-3 scaffold proteins mediate the inactivation of trim25 and inhibition of the type I interferon response by herpesvirus deconjugases.

The 14-3-3 molecular scaffolds promote type I interferon (IFN) responses by stabilizing the interaction of RIG-I with the TRIM25 ligase. Viruses have evolved unique strategies to halt this cellular response to support their replication and spread. Here, we report that the ubiquitin deconjugase (DUB) encoded in the N-terminus of the Epstein-Barr virus (EBV) large tegument protein BPLF1 harnesses 14-3-3 molecules to promote TRIM25 autoubiquitination and sequestration of the ligase into inactive protein aggregates. Catalytically inactive BPLF1 induced K48-linked autoubiquitination and degradation of TRIM25 while the ligase was mono- or di-ubiquitinated in the presence of the active viral enzyme and formed cytosolic aggregates decorated by the autophagy receptor p62/SQSTM1. Aggregate formation and the inhibition of IFN response were abolished by mutations of solvent exposed residues in helix-2 of BPLF1 that prevented binding to 14-3-3 while preserving both catalytic activity and binding to TRIM25. 14-3-3 interacted with the Coiled-Coil (CC) domain of TRIM25 in in vitro pulldown, while BPLF1 interacted with both the CC and B-box domains, suggesting that 14-3-3 positions BPLF1 at the ends of the CC dimer, close to known autoubiquitination sites. Our findings provide a molecular understanding of the mechanism by which a viral deubiquitinase inhibits the IFN response and emphasize the role of 14-3-3 proteins in modulating antiviral defenses.

Lateral A11 type tetramerization in lamins

The assembly of intermediate filaments (IFs) including nuclear lamins is driven by specific interactions of the elementary coiled-coil dimers in both lateral and longitudinal direction. The assembly mode A11 is dependent on lateral tetramerization of the second coiled-coil segment (coil1b) in antiparallel fashion. Recent cryo-electron microscopy studies pointed to 3.5 nm lamin filaments built from two antiparallel threads of longitudinally associated dimers but little molecular detail is available to date. Here we present the 2.6 Å resolution X-ray structure of a lamin A fragment including residues 65–222 which reveals the molecular basis of the A11 interaction. The crystal structure also indicates a continuous α-helical structure for the preceding linker L1 region. The middle part of the antiparallel tetramer reveals unique interactions due to the lamin-specific 42-residue insert in coil1b. At the same time, distinct characteristics of this insert provide for the preservation of common structural principles shared with lateral coil1b tetramers of vimentin and keratin K1/K10. In addition, structural analysis suggests that the A11 interaction in lamins is somewhat weaker than in cytoplasmic IFs, despite a 30% longer overlap. Establishing the structural detail of the A11 interaction across IF types is the first step towards a rational understanding of the IF assembly process which is indispensable for establishing the mechanism of disease-related mutations.

Structural basis for lamin assembly at the molecular level

Nuclear structure and function are governed by lamins, which are intermediate filaments that mostly consist of α-helices. Different lamin assembly models have been proposed based on low resolution and fragmented structures. However, their assembly mechanisms are still poorly understood at the molecular level. Here, we present the crystal structure of a long human lamin fragment at 3.2 Å resolution that allows the visualization of the features of the full-length protein. The structure shows an anti-parallel arrangement of the two coiled-coil dimers, which is important for the assembly process. We further discover an interaction between the lamin dimers by using chemical cross-linking and mass spectrometry analysis. Based on these two interactions, we propose a molecular mechanism for lamin assembly that is in agreement with a recent model representing the native state and could explain pathological mutations. Our findings also provide the molecular basis for assembly mechanisms of other intermediate filaments.

Critical Roles for Coiled-Coil Dimers of Butyrophilin 3A1 in the Sensing of Prenyl Pyrophosphates by Human Vγ2Vδ2 T Cells.

Vγ2Vδ2 T cells play important roles in human immunity to pathogens and tumors. Their TCRs respond to the sensing of isoprenoid metabolites, such as (E)-4-hydroxy-3-methyl-but-2-enyl pyrophosphate and isopentenyl pyrophosphate, by butyrophilin (BTN) 3A1. BTN3A1 is an Ig superfamily protein with extracellular IgV/IgC domains and intracellular B30.2 domains that bind prenyl pyrophosphates. We have proposed that intracellular α helices form a coiled-coil dimer that functions as a spacer for the B30.2 domains. To test this, five pairs of anchor residues were mutated to glycine to destabilize the coiled-coil dimer. Despite maintaining surface expression, BTN3A1 mutagenesis either abrogated or decreased stimulation by (E)-4-hydroxy-3-methyl-but-2-enyl pyrophosphate. BTN3A2 and BTN3A3 proteins and orthologs in alpacas and dolphins are also predicted to have similar coiled-coil dimers. A second short coiled-coil region dimerizes the B30.2 domains. Molecular dynamics simulations predict that mutation of a conserved tryptophan residue in this region will destabilize the dimer, explaining the loss of stimulation by BTN3A1 proteins with this mutation. The juxtamembrane regions of other BTN/BTN-like proteins with B30.2 domains are similarly predicted to assume α helices, with many predicted to form coiled-coil dimers. An exon at the end of this region and the exon encoding the dimerization region for B30.2 domains are highly conserved. We propose that coiled-coil dimers function as rod-like helical molecular spacers to position B30.2 domains, as interaction sites for other proteins, and as dimerization regions to allow sensing by B30.2 domains. In these ways, the coiled-coil domains of BTN3A1 play critical roles for its function.

Thermal unfolding of various human non-muscle isoforms of tropomyosin

Tropomyosin (Tpm) is an α-helical coiled-coil protein dimer, which forms a continuous head-to-tail polymer along the actin filament. In striated muscles, Tpm plays an important role in the Ca2+-dependent regulation of muscle contraction. However, little is known about functional and especially structural properties of the numerous non-muscle Tpm isoforms. In the present work, we have applied circular dichroism (CD) and differential scanning calorimetry (DSC) to investigate thermal unfolding and domain structure of various non-muscle human Tpm isoforms. These isoforms, the products of two different genes, TPM1 and TPM3, also significantly differ by alternatively spliced exons: N-terminal exons 1a2b or 1b, internal exons 6a or 6b, and C-terminal exons 9a, 9c or 9d. Our results clearly demonstrate that structural properties of various non-muscle Tpm isoforms can be quite different depending on the presence of different alternatively spliced exons in their genes. These data show for the first time a significant difference in the thermal unfolding between muscle and non-muscle Tpm isoforms and indicate that replacement of alternatively spliced exons alters the stability of certain domains in the Tpm molecule.

Structure and function of Spc42 coiled-coils in yeast centrosome assembly and duplication.

Centrosomes and spindle pole bodies (SPBs) are membraneless organelles whose duplication and assembly is necessary for bipolar mitotic spindle formation. The structural organization and functional roles of major proteins in these organelles can provide critical insights into cell division control. Spc42, a phosphoregulated protein with an N-terminal dimeric coiled-coil (DCC), assembles into a hexameric array at the budding yeast SPB core, where it functions as a scaffold for SPB assembly. Here, we present in vitro and in vivo data to elucidate the structural arrangement and biological roles of Spc42 elements. Crystal structures reveal details of two additional coiled-coils in Spc42: a central trimeric coiled-coil and a C-terminal antiparallel DCC. Contributions of the three Spc42 coiled-coils and adjacent undetermined regions to the formation of an ∼145 Å hexameric lattice in an in vitro lipid monolayer assay and to SPB duplication and assembly in vivo reveal structural and functional redundancy in Spc42 assembly. We propose an updated model that incorporates the inherent symmetry of these Spc42 elements into a lattice, and thereby establishes the observed sixfold symmetry. The implications of this model for the organization of the central SPB core layer are discussed.

Ets1 Plays a Critical Role in MLL/EB1-Mediated Leukemic Transformation in a Mouse Bone Marrow Transplantation Model

Leukemogenic potential of MLL fusion with the coiled-coil domain-containing partner genes and the downstream target genes of this type of MLL fusion have not been clearly investigated. In this study, we demonstrated that the coiled-coil–four-helix bundle structure of EB1 that participated in the MLL/EB1 was required for immortalizing mouse bone marrow (BM) cells and producing myeloid, but not lymphoid, cell lines. Compared to MLL/AF10, MLL/EB1 had low leukemogenic ability. The MLL/EB1 cells grew more slowly owing to increased apoptosis in vitro and induced acute monocytic leukemia with an incomplete penetrance and longer survival in vivo. A comparative analysis of transcriptome profiling between MLL/EB1 and MLL/AF10 cell lines revealed that there was an at least two-fold difference in the induction of 318 genes; overall, 51.3% (163/318) of the genes were known to be bound by MLL, while 15.4% (49/318) were bound by both MLL and MLL/AF9. Analysis of the 318 genes using Gene Ontology–PANTHER overrepresentation test revealed significant differences in several biological processes, including cell differentiation, proliferation/programmed cell death, and cell homing/recruitment. The Ets1 gene, bound by MLL and MLL/AF9, was involved in several biological processes. We demonstrated that Ets1 was selectively upregulated by MLL/EB1. Short hairpin RNA knockdown of Ets1 in MLL/EB1 cells reduced the expression of CD115, apoptosis rate, competitive engraftment to BM and spleen, and incidence of leukemia and prolonged the survival of the diseased mice. Our results demonstrated that MLL/EB1 upregulated Ets1, which controlled the balance of leukemia cells between apoptosis and BM engraftment/clonal expansion.Novelty and impact of this studyThe leukemogenic potential of MLL fusion with cytoplasmic proteins containing coiled-coil dimerization domains and the downstream target genes of this type of MLL fusion remain largely unknown. Using a retroviral transduction/transplantation mouse model, we demonstrated that MLL fusion with the coiled-coil–four-helix bundle structure of EB1 has low leukemogenic ability; Ets1, which is upregulated by MLL/EB1, plays a critical role in leukemic transformation by balance between apoptosis and BM engraftment/clonal expansion.

Design of split superantigen fusion proteins for cancer immunotherapy

Several antibody-targeting cancer immunotherapies have been developed based on T cell activation at the target cells. One of the most potent activators of T cells are bacterial superantigens, which bind to major histocompatibility complex class II on antigen-presenting cells and activate T cells through T cell receptor. Strong T cell activation is also one of the main weaknesses of this strategy as it may lead to systemic T cell activation. To overcome the limitation of conventional antibody-superantigen fusion proteins, we have split a superantigen into two fragments, individually inactive, until both fragments came into close proximity and reassembled into a biologically active form capable of activating T cell response. A screening method based on fusion between SEA and coiled-coil heterodimers was developed that enabled detection of functional split SEA designs. The split SEA design that demonstrated efficacy in fusion with coiled-coil dimer forming polypeptides was fused to a single chain antibody specific for tumor antigen CD20. This design selectively activated T cells by split SEA-scFv fusion binding to target cells.