Coherent Laser Radar System Research Articles

Coherent laser radar at 2 mu m using solid-state lasers

The development of a coherent laser radar system using 2- mu m Tm- and Tm, Ho-doped solid-state lasers, which is useful for the remote range-resolved measurement of atmospheric winds, aerosol backscatter, and differential absorption lidar (DIAL) measurements of atmospheric water vapor and CO/sub 2/ concentrations, is described. Measurements made with the 2- mu m coherent laser radar system, advances in the laser technology, and atmospheric propagation effects on 2- mu m coherent lidar performance are discussed. Results include horizontal atmospheric wind measurements to >20 km. vertical wind measurements to >5 km, near-horizontal cloud returns to 100 km, and hard target (mountainside) returns from 145 km.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Continuous wave coherent laser radar: calculation of measurement location and volume

The SNR equation of a CW, monostatic, coherent laser radar system is examined for the case of a distributed aerosol target. General analytic equations are derived which explicitly describe the contribution to total SNR from each range interval along the optic axis, the range resolution of the measurement, and the atmospheric volume contributing to the measurement. Plots are presented showing the location in range and the volume of the laser radar measurement.

Coherent lidar airborne windshear sensor: performance evaluation

National attention has focused on the critical problem of detecting and avoiding windshear since the crash on 2 Aug. 1985 of a Lockheed L-1011 at Dallas/Fort Worth International Airport. As part of the NASA/FAA National Integrated Windshear Program, we have defined a measurable windshear hazard index that can be remotely sensed from an aircraft, to give the pilot information about the wind conditions he will experience at some later time if he continues along the present flight path. A technology analysis and end-to-end performance simulation measuring signal-to-noise ratios and resulting wind velocity errors for competing coherent laser radar (lidar) systems have been carried out. The results show that a Ho:YAG lidar at a wavelength of 2.1 microm and a CO(2) lidar at 10.6 microm can give the pilot information about the line-of-sight component of a windshear threat from his present position to a region extending 2-4 km in front of the aircraft. This constitutes a warning time of 20-40 s, even in conditions of moderately heavy precipitation. Using these results, a Coherent Lidar Airborne Shear Sensor (CLASS) that uses a Q-switched CO(2) laser at 10.6 microm is being designed and developed for flight evaluation in the fall of 1991.

Spectral analysis, digital integration, and measurement of low backscatter in coherent laser radar

The operation of a surface acoustic wave spectrum analyser and digital integrator is reviewed. Expressions are derived for signal to noise ratio in the measured voltage spectrum with an approximation for the general case and rigorous treatment for the low signal case. A previous calibration study is re-evaluated to provide a final calibration for the atmospheric backscatter data accumulated by the airborne LATAS (laser true airspeed) coherent laser radar system.

Coherent laser radar at 106 μm using Nd:YAG lasers

A coherent laser radar system operating at the 1.06-microm Nd:YAG laser wavelength has been built and operated. A laser-diode-pumped monolithic ring laser served as the master oscillator. A single flash-lamp-pumped zigzag slab amplified the oscillator output to a power of 2.3 kW. Single-mode optical fiber was used to collect and mix the return signal with the local-oscillator output. Signals from clouds at a range of 2.7 km and from atmospheric aerosols at a range of 600 m were detected.