Coat Protein Of Bacteriophage M13 Research Articles

Assignment of 1H, 15N, and backbone 13C resonances in detergent-solubilized M13 coat protein via multinuclear multidimensional NMR: a model for the coat protein monomer.

The major coat protein (gVIIIp) of bacteriophage M13 complexed with SDS detergent micelles was used as a model system to study the lipid-bound conformation of the protein. Conditions were found that allowed the recording of good quality of NMR spectra. By making extensive use of three-dimensional heteronuclear (13C, 15N) NMR, we obtained a complete set of resonance assignments for 1HN, 1H alpha, 1H beta, 13C alpha, CO, and 15N and partially assigned the rest of the 1H spectrum. Analysis of NOE and chemical shift data reveals that gVIIIp is composed of two alpha-helical domains, one ranging from Pro-6 to Glu20 and the other ranging from Tyr-24 all the way to the C-terminus Ser-50. In contrast to the results reported by Henry and Sykes [Henry, G.D., & Sykes, B.D. (1992) Biochemistry 31, 5285-5297], at a high SDS to protein ratio the protein appears to be monomeric.

Formation of non-bilayer structures induced by M13 coat protein depends on the conformation of the protein

A comparison is made of the interaction of the coat protein of bacteriophage M13 in a predominant α-helix conformation and in a predominant β-sheet conformation. To perform a systematic study of the interaction between the protein in these two different forms and the surrounding lipid matrix. NMR spectra of 2H-nuclei of specific labelled phospholipid systems are measured. In addition 31P-NMR is employed to provide information about the morphological structure adopted by the reconstituted lipid/protein systems. From the 2H-NMR studies on specific headgroup and chain deuterium labelled phospholipids it is found that the protein in the predominant β-sheet conformation causes of fraction of lipids to be trapped. By combining the results from the headgroup and acyl chains of the phospholipids, it is concluded that the trapped lipids are arranged in a non-bilayer structure, probably caused by a misfitting of the hydrophobic core of the protein and the membrane bilayer. The protein in the predominant α-helix conformation perfectly fits in the lipid bilayer and has only minor influences on the surrounding lipid matrix. A new model is proposed to explain the presence of the trapped lipids in the lipid/protein systems.

Identification of potential active-site residues in the Escherichia coli leader peptidase.

Leader peptidase of Escherichia coli cleaves the leader sequence from the amino terminus of membrane and secreted proteins after these proteins insert across the membrane. Despite considerable research, the mechanism of catalysis of leader peptidase remains unknown. This peptidase cannot be classified using protease inhibitors to the serine, cysteine, aspartic acid, or metallo- classes of proteases (Zwizinski, C., Date, T., and Wickner, W. (1981) J. Biol. Chem. 256, 3593-3597). Using site-directed mutagenesis, we have attempted to place leader peptidase in one of these groups. We found that leader peptidase, lacking all of the cysteine residues, can cleave the leader peptide from procoat, the precursor to bacteriophage M13 coat protein. Replacement of each histidine residue with an alanyl residue was without effect on catalysis. Among all the serine and aspartic acid residues, serine 90 and serine 185 as well as aspartic acid 99, 153, 273, and 276 are necessary to cleave procoat in a detergent extract. However, only serine 90 and aspartic acid 153 were required for processing using a highly sensitive in vivo assay. In addition to the residues directly affecting catalysis, aspartic acid 99 plays a role in maintaining the structure of leader peptidase. Replacement of this residue with alanine results in a very unstable leader peptidase protein. This study thus defines two critical residues, serine 90 and aspartic acid 153, that may be directly involved in catalysis and provides evidence that leader peptidase belongs to a novel class of serine proteases.

Inserting foreign peptides into the major coat protein of bacteriophage M13

Foreign DNA fragments were inserted into filamentous phage gene VIII to create hybrid B-proteins with foreign sequences in the amino terminus. The hybrid proteins are incorporated into the virions which retain viability and infectivity. Virions with hybrid B-proteins have the same contour length and the same number of B-protein molecules as virions with natural B-proteins. It was shown that for one of hybrid B-proteins the position of the processing site had changed.

Stoichiometry, selectivity, and exchange dynamics of lipid-protein interaction with bacteriophage M13 coat protein studied by spin label electron spin resonance. Effects of protein secondary structure.

Bacteriophage M13 major coat protein has been isolated with cholate and reconstituted in dimyristoyl- and dioleoylphosphatidylcholine (DMPC and DOPC, respectively) bilayers by dialysis. Fourier transform infrared spectra of DMPC/coat protein recombinants confirmed that, whereas the protein isolated by phenol extraction was predominantly in a beta-sheet conformation, the cholate-isolated coat protein contained a higher proportion of the alpha-helical conformation [cf. Spruijt, R. B., Wolfs, C. J. A. M., & Hemminga, M. A. (1989) Biochemistry 28, 9158-9165]. The cholate-isolated coat protein/lipid recombinants gave different electron spin resonance (ESR) spectral line shapes of incorporated lipid spin labels, as compared with those from recombinants with the phenol-extracted protein that were studied previously [Wolfs, C. J. A. M., Horváth, L. I., Marsh, D., Watts, A., & Hemminga, M. A. (1989) Biochemistry 28, 9995-10001]. Plots of the ratio of the fluid/motionally restricted components in the ESR spectra of spin-labeled phosphatidylglycerol were linear with respect to the lipid/protein ratio in the recombinants up to 20 mol/mol. The corresponding values of the relative association constants, Kr, and number of association sites, N1, on the protein were Kr approximately 1 and N1 approximately 4 for DMPC recombinants and Kr approximately 1 and N1 approximately 5 for DOPC recombinants. Simulation of the two-component lipid spin label ESR spectra with the exchange-coupled Bloch equations gave values for the off-rate of the lipids leaving the protein surface of 2.0 x 10(7) s-1 at 27 degrees C in DMPC recombinants and 3.0 x 10(7) s-1 at 24 degrees C in DOPC recombinants.(ABSTRACT TRUNCATED AT 250 WORDS)

Transmembrane region of wild-type and mutant M13 coat proteins. Conformational role of beta-branched residues.

Although transmembrane (TM) segments of integral membrane proteins are putatively alpha-helical in conformation, beta-sheet promoters (Val, Ile, Thr) often account for approximately 40% of TM residue composition. We are examining the conformational role(s) of these residues, using as a model system the major coat protein of the filamentous bacteriophage M13. This 50-residue protein, which is located at the Escherichia coli host membrane during phage reproduction, contains a prototypic 19-residue hydrophobic midregion (residues 21-39: YIGYAWAMVVVIVGATIGI). Using "Eckstein" site-directed mutagenesis, we have generated several viable M13 coat protein mutants with beta-branched amino acid substitutions within their TM region. Mutant coat proteins, including Ile32----Val (I32V) and Ala27----Thr (A27T), were obtained in milligram quantities by growing M13 mutant phages in liter preparations, confirming that these coat proteins are capable of assuming their normal biological function(s) in phage reproduction. Circular dichroism spectroscopy performed in the membrane-mimetic medium of deoxycholate micelles indicated comparable alpha-helical contents of mutants I32V and A27T to wild-type protein. 13C nuclear magnetic resonance experiments with mutant A27T demonstrated that the combination of additional beta-branched content and introduction of an -OH substituent induced chemical shift and temperature-dependent changes and influenced the local protein environment at sites up to 12 residues remote from the mutation site. In contrast, mutant I32V (of which a salient feature is a mid-TM pentavaline segment) behaved very similarly to wild-type coat. These findings are interpreted in terms of the range of TM secondary structure and stability which can be accommodated by viable M13 coat protein mutants.

Spectroscopy of lipid-protein interactions: structural aspects of two different forms of the coat protein of bacteriophage M13 incorporated in model membranes

Spectroscopy of lipid-protein interactions: structural aspects of two different forms of the coat protein of bacteriophage M13 incorporated in model membranes

Design, construction and function of a multicopy display vector using fusions to the major coat protein of bacteriophage M13

Incorporation of numerous copies of a heterologous protein (bovine pancreatic trypsin inhibitor; BPTI) fused to the mature major coat protein (gene VII product; VIII) of bacteriophage M13 has been demonstrated. Optimization of the promoter, signal peptide and host bacterial strain allowed for the construction of a working vector consisting of the M13 genome, into which was cloned a synthetic gene composed of a lac (or tac) promoter, and sequences encoding the bacterial alkaline phosphatase signal peptide, mature BPTI and the mature coat protein. Processing of the BPTI-VIII fusion protein and its incorporation into the bacteriophage were found to be maximal in a host bacterial strain containing a prlA/secY mutation. Functional protein is displayed on the surface of M13 phage, as judged by specific interactions with antiserum, anhydrotrypsin, and trypsin. Such display vectors can be used for epitope mapping, production of artificial vaccines and the screening of diverse libraries of proteins or peptides having affinity for a chosen ligand. The VIII display phage system has practical advantages over the III display phage system in that many more copies of the fusion protein can be displayed per phage particle and the presence of the VIII fusion protein has little or no effect on the infectivity of the resulting bacteriophage.

Monovalent phage display: A method for selecting variant proteins from random libraries

A technique for rapidly searching libraries of protein variants for ones that bind tightly to a target receptor is described. Mutated proteins are fused to the gene III coat protein of the filamentous bacteriophage M13 and are displayed in a monovalent fashion. Phage particles are subjected to iterative rounds of binding selection on a receptor affinity matrix. Using this system, we have sorted several libraries containing >10 6 variants of human growth hormone for those that bind with greater affinity to the extracellular domain of the human growth hormone receptor. Mutated proteins with affinities as low as 10 6 to 10 12 m −1 can be isolated. This technique has broad applications for selecting protein variants having improved binding properties.

The in situ aggregational and conformational state of the major coat protein of bacteriophage M13 in phospholipid bilayers mimicking the inner membrane of host Escherichia coli

The major coat protein of bacteriophage M13 has been reconstituted into phospholipids with a composition comparable to that found in the host (Escherichia coli) inner membrane. Reconstitution experiments have revealed conditions in which the alpha-oligomeric state is favored over the beta-polymeric state. Discrimination between the two states of the membrane-bound coat protein (alpha-oligomeric and beta-polymeric states) has been achieved using high-performance size-exclusion chromatography and circular dichroism. Interprotein electrostatic interactions, probably induced by head-tail binding, are initiated and facilitating the aggregation-related conformational change process, in which alpha-oligomeric coat protein is converted into beta-polymeric coat protein. A model for this beta-polymerization process of the coat protein is presented. The alpha-helical protein has been studied by the in situ Trp fluorescence quantum yield. This shows that the average distances between coat proteins decrease upon lowering the L/P ratio. In situ cross-linking reactions of the coat protein at high L/P ratios reveal a monomeric state, thus excluding specific aggregation of the coat protein. A monomeric state of detergent-solubilized coat protein is also observed using SDS-PAGE and SDS-HPSEC. On the basis of these results, the smallest in situ aggregational entity of the coat protein is proposed to be a monomer. This finding is discussed in relation to the functional state of the M13 coat protein in the membrane-bound assembly and disassembly processes during infection.

Viable transmembrane region mutants of bacteriophage M13 coat protein prepared by site-directed mutagenesis

Bacteriophage M13 coat protein - a 50-residue protein located at the E. coli host membrane during phage reproduction - is subjected to cytoplasmic, membrane-bound, and DNA-interactive environments during the phage life cycle. In research to examine the specific features of primary/secondary structure in the effective transmembrane (TM) region of the protein (residues 21-39: YIGYAWAMVVVIVGATIGI) which modulate its capacity to respond conformationally to the progressive influences of these varying environments, we have prepared over two dozen viable mutant phages with alterations in their coat protein TM regions. Mutants were obtained through use of site-directed mutagenesis techniques in combination with three "randomized" oligonucleotides which spanned the TM region. No subcloning was required. Among mutations observed were those in which each of the four TM Val residues was changed to Ala, and several with increased Ser or Thr content, including one double Ser mutant (G23S-A25S). Polar substitutions arising at Gly23 and Tyr24-including G23D, Y24H, Y24D and Y24N-suggested that this local segment resides external to the host membrane. Milligram quantities of mutant coat proteins are obtained by growing M13 mutant phages in liter preparations, with isotopic (e.g., 13C) labelling at desired sites, for subsequent characterization and conformational analysis in membrane-mimetic media.

The Function of a Leader Peptide in Translocating Charged Amino Acyl Residues Across a Membrane

Insertion of bacteriophage coat proteins into the membrane of infected bacterial cells can be studied as a model system of protein translocation across membranes. The coat protein of the filamentous bacteriophage Pf3--which infects Pseudomonas aeruginosa--is 44 amino acids in length and has the same basic structure as the coat protein of bacteriophage M13, which infects Escherichia coli. However, unlike the Pf3 coat protein, the M13 coat protein is synthesized as a precursor (procoat) with a typical leader (signal) sequence, which is cleaved after membrane insertion. Nevertheless, when the gene encoding the Pf3 coat protein is expressed in E. coli, the protein is translocated across the membrane. Hybrid M13 and Pf3 coat proteins were constructed in an attempt to understand how the Pf3 coat protein is translocated without a leader sequence. These studies demonstrated that the extracellular regions of the proteins determined their cellular location. When three charged residues in this region were neutralized, the leader-free M13 coat protein was also inserted into the membrane. Differences in the water shell surrounding these residues may account for efficient membrane insertion of the protein without a leader sequence.

Efficient translocation of positively charged residues of M13 procoat protein across the membrane excludes electrophoresis as the primary force for membrane insertion.

The coat protein of bacteriophage M13 is inserted into the Escherichia coli plasma membrane as a precursor protein, termed procoat, with a typical leader peptide of 23 amino acid residues. Its membrane insertion requires the electrochemical potential but not the cellular components SecA and SecY. Since the electrochemical gradients result in the periplasmic side of the membrane being positively charged, the membrane potential could contribute to the transfer of the negatively charged central region of procoat across the membrane. Here we demonstrate that the central domain following the leader peptide can be translocated across the membrane even when the net charge of the region is changed from -3 to +3. This rules out an electrophoresis-like insertion mechanism for procoat. We also show that the sec independence of procoat insertion is linked to the presence of the second apolar domain. The deletion of most of the second apolar domain from a procoat fusion protein results in sec dependent membrane insertion of the hybrid protein. Moreover, like other proteins that require the sec genes, translocation of this sec dependent procoat protein is inhibited when positively charged residues are introduced after the leader peptide. Loop models involving one or two hydrophobic regions are presented that account for the differences in tolerance of positively charged residues.

Analysis of time-resolved fluorescence anisotropy in lipid-protein systems

Fluorescent probes located in heterogeneous environments give rise to anomalous time-resolved fluorescence anisotropy. A simple analytical expression of anisotropy has been derived for the case of a small difference in local fluorescence lifetimes. The expression has the diagnostic advantage that the time dependence of the fluorescence anisotropy can be predicted from the differences in fluorescence lifetimes and residual anisotropies of the probes located in different sites. Using this model, the local fluorescence anisotropy parameters and the relative contributions of the lipid probe octadecyl rhodamine B in a lipid environment and in the vicinity of bacteriophage M13 coat protein reconstituted in phospholipid bilayers, composed of 80% 1,2-dimyristoyl-sn-glycero-3-phosphocholine and 20% 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol have been determined experimentally. At 40 degrees C, the correlation times for bound and free probes are 2.3 and 3.0 ns, respectively, while the corresponding order parameters are 0.85 and 0.62, respectively.

Analysis of time-resolved fluorescence anisotropy in lipid-protein systems

The subnanosecond fluorescence and motional dynamics of the tryptophan residue in the bacteriophage M13 coat protein incorporated within pure dioleoylphosphatidylcholine (DOPC) as well as dioleoylphosphatidylcholine/dioleoylphosphatidylglycerol (DOPC/DOPG) and dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) bilayers (80/20 w/w) with various L/P ratio have been investigated. The fluorescence decay is decomposed into four components with lifetimes of about 0.5, 2.0, 4.5 and 10.0 ns, respectively. In pure DOPC and DOPC/DOPG lipid bilayers, above the phase transition temperature, the rotational diffusion of the protein molecules contributes to the depolarization and the anisotropy of tryptophan is fitted to a dual exponential function. The longer correlation time, describing the rotational diffusion of the whole protein, shortens with increasing temperature and decreasing protein aggregation number. In DMPC/DMPG lipid bilayers, below the phase transition, the rotational diffusion of the protein is slowed down such that the subnanosecond anisotropy decay of tryptophan in this system reflects only the segmental motion of the tryptophan residue. Because of a heterogeneous microenvironment, the anisotropy decay must be described by three exponentials with a constant term, containing a negative coefficient and a negative decay time constant. From such a decay, the tryptophan residue within the aggregate undergoes a more restricted motion than the one exposed to the lipids. At 20 degrees C, the order parameter of the transition moment of the isolated tryptophan is about 0.9 and that for the exposed one is about 0.5.

ESR of spin-labeled bacteriophage M13 coat protein in mixed phospholipid bilayers

Bacteriophage M13 major coat protein was spin-labeled with a nitroxide derivative of iodoacetamide, preferentially at the single methionine that is located in the hydrophobic region of the protein. The spin-labeled protein was incorporated at different lipid-to-protein ratios in phospholipid bilayers composed of dimyristoylphosphatidylglycerol (DMPG), dimyristoylphosphatidylcholine (DMPC), or the 1:1 molar mixture of these lipids. Both conventional and saturation transfer (ST) ESR studies were performed to investigate the rotational motions of the protein over a large dynamic range. The conventional ESR spectra indicate that the mobility of the spin labelled protein in the lipid gel phase decreases in the order: DMPG > DMPC/DMPG (1:1) > DMPC. In the liquid crystalline phase, the largest mobility is found in DMPC/DMPG (1:1, mol/mol) mixtures, but the mobility is still greater in DMPG than in DMPC. The results are interpreted in terms of different degrees of protein aggregation in the different lipids. Segmental motion with rotational correlation times on the order of tens of nanoseconds, motional anisotropy, and spectral overlap complicate the analysis of the STESR spectra. An estimate of the size of the protein aggregates is found to be in the region of 85 monomer units. Removing the polar tails from the protein by proteolytic digestion results in an enhanced aggregation in the gel phase. In the liquid crystalline phase, the segmental wobbling mobility of the protein is increased relative to the native protein, whereas the overall rotational diffusion is not changed greatly.

Structure and dynamics of detergent-solubilized M13 coat protein (an integral membrane protein) determined by 13C and 15N nuclear magnetic resonance spectroscopy

The major coat protein of the filamentous bacteriophage M13 is inserted as an integral protein in the inner membrane of the Escherichia coli host upon infection. M13 coat protein is an ideal model membrane protein and has been the target of many biophysical studies. An overview is presented here of the application of nuclear magnetic resonance spectroscopy to the study of the structure and dynamics of M13 coat protein in several lipid-mimetic environments. The coat protein may be biosynthetically enriched with 13C- and 15N-labelled amino acids, allowing the resolution and assignment of individual nuclei. Structural fluctuations at selected sites have been monitored using 13C relaxation and isotope-detected amide hydrogen exchange kinetics. A model is proposed for the structure of a coat protein dimer in detergent micelles.

Spin-label ESR of bacteriophage M13 coat protein in mixed lipid bilayers. Characterization of molecular selectivity of charged phospholipids for the bacteriophage M13 coat protein in lipid bilayers

Bacteriophage M13 major coat protein has been incorporated at different lipid/protein ratios in lipid bilayers consisting of various ratios of dimyristoylphosphatidylcholine (DMPC) to dimyristoylphosphatidylglycerol (DMPG). Spin-label ESR experiments were performed with phospholipids labeled at the C-14 position of the sn-2 chain. For M13 coat protein recombinants with DMPC alone, the relative association constants were determined for the phosphatidylcholine, phosphatidylglycerol, and phosphatidic acid spin-labels and found to be 1.0, 1.0, and 2.1 relative to the background DMPC, respectively. The number of association sites for each phospholipid on the protein was found to be 4 per protein monomer. The intrinsic off-rates for lipid exchange at the intramembranous surface of the protein in DMPC alone at 30 degrees C were found to be 5 X 10(6), 6 X 10(6), and 2 X 10(6) s-1 for the phosphatidylcholine, phosphatidylglycerol, and phosphatidic acid spin-labels, respectively. Adding DMPG to the DMPC lipid system increased the exchange rates of the lipids on and off the protein. By gel filtration chromatography, it is found that protein aggregation is reduced after addition of DMPG to the lipid system. This is in agreement with measurements of tryptophan fluorescence, which show a decrease in quenching efficiency after introduction of DMPG in the lipid system. The results are interpreted in terms of a model relating the ESR data to the size of the protein-lipid aggregates.

Aggregation-related conformational change of the membrane-associated coat protein of bacteriophage M13.

The state of the coat protein of bacteriophage M13, reconstituted into amphiphilic media, has been investigated. The in situ conformation of the coat protein has been determined by using circular dichroism. Minimum numbers for the protein aggregation in the system have been determined after disruption of the lipid-protein system and subsequent uptake of the protein in cholate micelles. The aggregational state and conformation of the protein were affected by (1) the method of coat protein isolation (phenol extraction vs cholate isolation), (2) the nature of amphiphiles used (variation in phospholipid headgroups and acyl chains), and (3) the ratio of amphiphiles and protein. Under all conditions, phenol-extracted coat protein was in a predominantly beta-structure and in a highly aggregated polymeric form. Cholate-isolated coat protein was initially oligomeric and contained a substantial amount of alpha-helix. Below an aggregation number of 20, this protein showed a reversible aggregation with no change in conformation. Upon further aggregation, a conformational change was observed, and aggregation was irreversible, resulting in predominantly beta-structured coat protein polymers. This effect was observed upon uptake in phospholipids at low lipid to protein molar ratios (L/P ratios) and with phosphatidylcholines (PC) and phosphatidic acids (PA) containing saturated acyl chains. After reconstitution in phospholipids with unsaturated acyl chains and with phosphatidylglycerols (PG) at high L/P ratios, the original alpha-helix-containing state of the coat protein was maintained. Cross-linking experiments demonstrated that the beta-polymers are able to form reversible superaggregates within the vesicle system. An aggregation-related conformational change mechanism for the coat protein in phospholipid systems is proposed.

Environmental modulation of M13 coat protein tryptophan fluorescence dynamics.

The effects of detergent [deoxycholate (DOC) and phospholipid [dimyristoylphosphatidylcholine (DMPC)] environments on the rotational dynamics of the single tryptophan residue 26 of bacteriophage M13 coat protein have been investigated by using time-resolved single photon counting measurements of the fluorescence intensity and anisotropy decay. The total fluorescence decay of tryptophan-26 is complex but rather similar in DOC as compared to DMPC when analyzed in terms of a lifetime distribution (exponential series method). This similarity, in conjunction with the almost identical steady-state fluorescence spectra, indicates only minor differences between the tryptophan environments in DOC and DMPC. The reorientational dynamics of tryptophan-26 are dominated by slow rotation of the entire protein in both detergent and phospholipid environments. The resolved anisotropy decay in DOC can be approximated by a simple hydrodynamic model of protein/detergent micelle rotational diffusion, although the data indicative slightly greater complexity in the rotational motion. The tryptophan fluorescence anisotropy is not sensitive to protein conformational changes in DOC detected by nuclear magnetic resonance on the basis of pH independence in the range 7.5-9.1. In DMPC bilayers, restricted tryptophan motion with a correlation time of approximately 2 ns is observed together with a second very slow reorientational component. Resolution of the time constant for this slow rotation is obscured by the tryptophan fluorescence time window being too short to clearly locate its anisotropic limit. The possible contribution made by axial rotational diffusion of the protein to this slow rotational process is discussed.(ABSTRACT TRUNCATED AT 250 WORDS)