The article presents the obtaining results of clinkers of sulfate resistant and road cement during the production tests process. The usage of man-made wastes such as lead slag, coal mining waste as well as clay component and additives. X-ray, chemical analyzes of starting materials, clinkers and obtained cements were carried out. The regularities of charge compositions, saturation coefficient, modules, burning regimes on chemical and mineralogical composition and quality of clinkers and cements, improvement of rotary kiln operation, reduction of greenhouse gas emissions and fuel consumption are established. Various methods of analysis were used, calculations of raw mixtures composition were carried out according to the program "Shikhta" (designed to calculate the raw mix and the mineralogical composition of the clinker for the production of Portland cement. The program was developed in the V.G. Shukhov Belgorod State Technical University, Russia) and "Calculation of raw mixtures or CRM" (designed to calculate the raw mix of clinker. The program was developed in the M. Auezov South-Kazakhstan State University, Kazakhstan). The strength of factory and experimental cements was tested after 3, 7 and 28 days and after steaming.