Coagulation Process Research Articles

A novel risk stratification approach and molecular subgroup characterization based on coagulation related genes in colon adenocarcinoma

Colon adenocarcinoma (COAD) represents a significant health concern within the population. Advancing our understanding of COAD is imperative for early detection, enabling personalized treatment interventions, and facilitating the development of effective preventive measures. The coagulation system plays a role in tumor-related pathological processes; however, its specific involvement in COAD and potential contributors remain unclear. This study aimed to establish a novel risk stratification approach by analyzing coagulation related genes (CRGs) associated with COAD. Through a comprehensive bioinformatics analysis of data from public databases, we screened COAD associated CRGs and characterized the associated molecular subtypes. After a comprehensive analysis of the characteristics of each subtype, we applied differentially expressed genes in CRG subtypes to establish a new risk stratification method. Clinical subgroup analysis, immunoinfiltration analysis, therapeutic reactivity prediction and other analytical methods suggest the potential clinical value of the established risk stratification method. As one of the selected targets, the effect of MS4A4A on the proliferation and invasion of COAD was confirmed by in vitro experiments, which partially verified the reliability of bioinformatics results. Our findings delineate CRGs potentially implicated in COAD pathogenesis and offer fresh insights into the influence of the coagulation process on tumorigenesis and progression.

Removal of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) by coagulation: Influence of coagulant and dosing conditions

Per- and polyfluoroalkyl substances (PFAS) pose significant risks to the environment and human health. Perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) are two of the most frequently detected PFAS in the environment. In most surface water drinking water treatment works (WTW), coagulation is the first processes exposed to a range of contaminants, including PFAS. While not designed to be a process for removal of micropollutants, it is important to understand the fate of PFAS in coagulation processes, intended or otherwise, to determine whether water treatment sludge can be a significant sink for this group of micropollutants. This work advances understanding of PFAS removal in coagulation processes by comparing the removal of PFOA and PFOS by four metal coagulants (Zr, Zn, Fe, and Al) from real water matrices. The coagulant performance followed the order Al > Fe > Zr > Zn. Al was taken forward for further evaluation, with significant removal of PFAS (>15 % for PFOA and > 30 % for PFOS) being observed when the pH<5.5 and the dose was > 5 mg Al·L-1. The adsorption of PFOA and PFOS onto flocs through hydrophobic interaction was the primary removal route. The impacts of background matrix on the mechanisms of coagulation for PFAS were explored using five organic compounds. Macromolecular organic compounds contributed to an increase in removal due to the sorption of PFAS and subsequent removal of the organic-PFAS aggregate during coagulation. Low molecular weight organic matter inhibited the removal of PFAS due to the ineffective removal of these compounds during coagulation.

Accelerated wound healing and reduced scar formation induced by D-mannose: a possible role of mannose binding lectin

Wounds are most commonly caused by accidents, surgery and burns, and can be internal or external. Naturally, the wound healing process can take a long time and lead to scarring. In this study we present a technique to shorten wound healing time and prevent or mitigate scarring using D-mannose that is applied directly on the wound. The results showed that the healing time is almost halved compared to treatment with povidone-iodine solution which is an antiseptic widely used in surgery. D-Mannose is neither an antisepsis nor an antibiotic. We propose a posssible mechanism by which D-mannose binds to D-mannose binding lectin and immediately activates the innate immune system that ultimately phagocytizes pathogens and clears the wound of degraded cells and materials, which reduces inflammation and implicitly wound healing time. D-Mannose also intervenes in the coagulation process by binding to fibrinogen, generating a finer and denser fibrin, which visibly reduces collagen scars. Our findings show that applying D-mannose directly on the wound as a powder shortens wound healing time and visibly attenuates scarring. Apart from the unaesthetic appearance, these scars can also cause a certain tissue dysfunction, regardless of the affected organ.Graphical abstract

Enhanced tofu quality through calcium sulfate and transglutaminase treatment: physicochemical properties and digestibility analysis

SummaryTofu, a traditional soy‐based food, is widely consumed globally and serves as a significant source of plant protein. The quality of tofu can vary greatly depending on the coagulation process and the type of coagulants used. This study investigated the impact of a compound coagulant, consisting of transglutaminase (TGase) and calcium sulfate (CaSO4), on tofu quality, specifically focusing on pH, yield, water holding capacity (WHC), cooking loss, protein content, and in vitro digestibility. Soymilk was pre‐crosslinked with TGase for different durations (0, 1, 2, and 3 h) before the addition of CaSO4. Results indicated that TGase pre‐treatment significantly improved tofu yield and WHC, with optimal outcomes at 3 and 2 h, respectively. Cooking loss decreased with TGase treatment but increased at the 3‐h mark, suggesting over‐crosslinking. Electrophoresis revealed substantial protein crosslinking with TGase treatment, while in vitro digestion showed enhanced protein digestibility and higher peptide content in TGase‐treated samples. These findings underscore the potential of TGase treatment to enhance tofu's structural integrity and digestibility, offering valuable insights for optimising plant‐based protein processing to improve nutritional quality.

Effects of platelet-rich fibrin on human endometrial stromal cells behavior in comparison to platelet-rich plasma.

Intrauterine transfusion of platelet-rich plasma (PRP) has become a new treatment for thin endometrium (TE) in recent years, but its low efficacy due to rapid release of growth factors limits its clinical use. Platelet-rich fibrin (PRF) starts the coagulation cascade reaction immediately after the blood comes into contact with the test tube. The natural coagulation process results in stable platelet activation and the slow release of growth factors. In our study, primary human endometrial stromal cells (hESCs) were extracted from endometrial tissue. PRP and PRF were prepared from the patient cubital vein blood. Stromal cells were cultured in conditioned medium supplemented with PRP and PRF. Differences in cell behavior were observed by cell proliferation test and cell migration test. The relative expression levels of apoptotic Bax and antiapoptotic Bcl-2 genes were measured by qRT-PCR. The release of growth factors from PRP and PRF was detected by ELISA. We found that both PRP and PRF inhibited apoptosis of hESCs, which favored cell proliferation and migration. In addition, PRF releases growth factors for a longer period of time compared to PRP. PRF offer a more sustained therapeutic effect compared to PRP, which provides a new idea for endometrial regeneration and repair.

Mitochondrial dysfunction in platelets from severe trauma patients - A prospective case-control study

IntroductionTrauma-induced coagulopathy (TIC) refers to an abnormal coagulation process, an imbalance between coagulation and fibrinolysis due to several pathological factors, such as haemorrhage and tissue injury. Platelet activation and subsequent clot formation are associated with mitochondrial activity, suggesting a possible role for mitochondria in TIC. Comprehensive studies of mitochondrial dysfunction in platelets from severe trauma patients have not yet been performed. MethodsIn this prospective case-control study, patients with severe trauma (ISS≥16) had venous blood samples taken at arrival to the Emergency Unit of a Level 1 Trauma Centre. Mitochondrial functional measurements (Oxygraph-2k, Oroboros) were performed to determine oxygen consumption in different respiratory states, the H2O2 production and extramitochondrial Ca2+ movements. In addition, standard laboratory and coagulation tests, viscoelastometry (ClotPro) and aggregometry (Multiplate) were performed. Measurements data were compared with age and sex matched healthy control patients. ResultsSevere trauma patients (n = 113) with a median age of 38 years (IQR, 20–51), a median ISS of 28 (IQR, 20–48) met our inclusion criteria. Oxidative phosphorylation in platelet mitochondria from severe trauma patients significantly decreased compared to controls (34.7 ± 8.8 pmol/s/mL vs. 48.0 ± 19.7 pmol/s/mL). The mitochondrial H2O2 production significantly increased and greater endogenous Ca2+ release was found in the polytrauma group. Consistent with these results, clotting time (CT) increased while maximum clot firmness (MCF) decreased with the EX-test and FIB-test in severe trauma samples. Multiplate aggregometry showed significantly decreased ADP-test (38 ± 12 AUC vs. 112 ± 14 AUC) and ASPI test (78 ± 22 AUC vs. 84 ± 28 AUC) also tended to decrease in mitochondria of polytrauma patients as compared with controls. Significant strong correlation has been demonstrated between mitochondrial OxPhos and MCF while it was negatively correlated with ISS (R2=0.448, P˂0.05), INR, CT and lactate level of patients. ConclusionsThe present study revealed that severe trauma is associated with platelet mitochondrial dysfunction resulting in reduced ATP synthesis and impaired extramitochondrial Ca2+ movement. These factors are required for platelet activation, recruitment and clot stability likely thus, platelet mitochondrial dysfunction contributes to the development of TIC.

Production of milk-coagulating protease by fungus Pleurotus djamor through solid state fermentation using wheat bran as the low-cost substrate

Proteases are enzymes that hydrolyze peptide bonds present in proteins and peptides. They are widely used for various industrial applications, such as in the detergent, food, and dairy industries. Cheese is one of the most important products of the dairy industry, and the coagulation stage is crucial during the cheese-making process. Enzymatic coagulation is the most common technique utilized for this purpose. Microbial enzymes are frequently used for coagulation due to their advantages in terms of availability, sustainability, quality control, product variety, and compliance with dietary and cultural/religious requirements. In the present study, we identified and subsequently characterized milk coagulant activity from the fungus Pleurotus djamor PLO13, obtained during a solid-state fermentation process, using the agro-industrial residue, wheat bran, as the fermentation medium. Maximum enzyme production and caseinolytic activity occurred 120 h after cultivation. When the enzyme activity against various protease-specific synthetic substrates and inhibitors was analyzed, the enzyme was found to be a serine protease, similar to elastase 2. This elastase-2-like serine protease was able to coagulate pasteurized whole and reconstituted skim milk highly efficiently in the presence and absence of calcium, even at room temperature. The coagulation process was influenced by factors such as temperature, time, and calcium concentration. We demonstrate here, for the first time, an elastase-2-like enzyme in a microorganism and its potential application in the food industry for cheese production.

The Preparation of W/O/W High-Internal-Phase Emulsions as Coagulants for Tofu: The Effect of the Addition of Soy Protein Isolate in the Internal Water Phase.

Tofu quality is determined by a controlled coagulation process using a W/O/W emulsion coagulant. The impact of adding soy protein isolate (SPI) to the inner water phase on the stability of W/O/W high-internal-phase emulsions (HIPEs) and its application as a coagulant for tofu was assessed. No creaming occurred during 7-day storage with SPI concentrations up to 0.3%, while the emulsion droplets aggregated with 0.5% and 0.7% SPI. Emulsions containing 0.3% SPI maintained a constant mean droplet size after 21 days of storage and exhibited the lowest TURBISCAN stability index value. HIPE stability against freeze-thaw cycles improved after heating. HIPEs with SPI concentrations above 0.3% demonstrated an elastic gel-like behavior. The increased viscosity and aggregation of the protein around droplets indicated that the interaction among emulsion droplets could enhance stability. W/O/W HIPE coagulants significantly increased tofu yield, reduced hardness, and produced a more homogenous tofu gel compared to a MgCl2 solution. The HIPE with 0.3% SPI was found to be optimal for use as a coagulant for tofu.

Application of Artificial Intelligence in the Management of Coagulation Treatment Engineering System

In this paper, the application of artificial intelligence, especially neural networks, in the field of water treatment is comprehensively reviewed, with emphasis on water quality prediction and chemical dosage optimization. It begins with an overview of machine learning and deep learning concepts relevant to water treatment. Key advances and challenges in using neural networks for coagulation processes are thoroughly analyzed, including the automation of coagulant dosing, dosage level optimization, and efficiency comparisons of modeling approaches. Applications of neural networks in predicting pollutant levels and supporting water quality monitoring are explored. The review identifies avenues for improving coagulation-based modeling with neural networks, such as enhancing data quality, employing feature engineering, refining model selection criteria, and improving cross-validation methods. The necessity of continuous monitoring and adaptive optimization strategies is emphasized. Challenges such as the complexity of coagulation processes, feedback control signal acquisition, and model adaptability from simulations to real-world settings are discussed. Cost control and resource management in water treatment are also highlighted, emphasizing the optimized chemical dosage to reduce expenses while maintaining water quality compliance. In summary, this review provides valuable insights into the current state of neural network applications in water treatment and highlights key areas for further research and development. Integrating AI into coagulation processes has the potential to enhance the efficiency and sustainability of drinking water treatment.

A Comparative Study of Coagulation Profiles in Preeclamptic and Normotensive Patients in Relation to Maternal and Fetal Outcomes.

Background Hypertensive complications during pregnancy play a significant role in the increased rates of maternal and perinatal morbidity and mortality on a global scale. Preeclampsia is characterized by elevated blood pressure levels and the presence of protein in the urine and is associated with diverse hematological alterations, particularly impacting the coagulation cascade. The primary objective of this research was to conduct a comparative analysis of the coagulation profiles and pregnancy outcomes in women with preeclampsia versus those with normal blood pressure during pregnancy. Methods This was a prospective case-control study with 74 participants across two groups, conducted from September 2022 to May 2024. The participants were enrolled and divided into two groups, with 37 in the clinically diagnosed preeclampsia group and 37 in the normotensive group. Coagulation parameters including platelet count, bleeding time, clotting time, international normalized ratio (INR), activated partial thromboplastin time (APTT), prothrombin time (PT), fibrinogen levels, alkaline phosphatase (ALP) levels, D-dimer levels, and fibrin degradation products (FDP) levels were assessed. Maternal and neonatal outcomes were also compared. In our study, we comprehensively examined both maternal and neonatal outcomes in preeclampsia and normotensive groups. Maternal complications analyzed included mode of delivery, incidence of eclampsia, placental abruption, hemolysis, elevated liver enzymes, and low platelets (HELLP) syndrome, postpartum hemorrhage (PPH), and peripartum cardiomyopathy (PPCM). For neonatal outcomes, we assessed birth weight, appearance, pulse, grimace, activity, and respiration (APGAR) scores, and the duration of neonatal intensive care unit (NICU) stays. Results The results showed that mean platelet count was significantly lower in the preeclampsia group (151,503 ± 59,875/µL) compared to the normotensive group (245,405 ± 69,021/µL) (p < 0.0001). Bleeding time, INR, APTT, and PT showed significant elevation in the preeclampsia group, indicating a slower coagulation process. Fibrinogen levels, ALP levels, and D-dimer levels were significantly higher in the preeclampsia group (p < 0.0001). The preeclampsia group had a higher rate of cesarean sections (65% vs. 24%) and lower neonatal birth weights (mean 2.3 kg vs. 2.5 kg). APGAR scores were comparable between groups, but a higher number of neonates went to the NICU in the preeclampsia group (64.9% vs. 10.8%). The preeclampsia group also showed higher rates of low birth weight (27%), intrauterine growth restriction (27%), respiratory distress syndrome (10.8%), and asphyxia (5.4%). Conclusion Preeclampsia is associated with significant hematological changes, particularly in coagulation parameters, and adverse fetomaternal outcomes. Early identification and monitoring of these changes are crucial for timely intervention and improving maternal and neonatal health outcomes.

Electrocoagulation process for phosphate recovery of agricultural wastewater: effect of calcium adding, voltage, and time.

Recovery of valuable resources, such as phosphate recovery from wastewater, can help close the nutrient cycle and is interesting to investigate. This study aims to evaluate phosphate recovery and set aside TOC, OC, and IC in agricultural wastewater using electrocoagulation with a helix electrode configuration. This study employed the Response Surface Methodology (RSM) for statistical analysis and modeling, utilizing a central composite design (CCD). Variation of calcium concentration (2-7mg/L), voltage (15-45V), and electrocoagulation time (5-15min) was applied in an electrocoagulation reactor with a helix-shaped stainless steel cathode and a solid cylindrical Mg anode. Based on RSM analysis, electrocoagulation with a helical electrode configuration significantly affects phosphate recovery and the removal of TOC, OC, and IC when treating agricultural wastewater. Under operating conditions of 15V, 15min time, and 2mg/L calcium concentration, we achieved the lowest phosphate concentration of 0.003mg/L (99.74% reduction). The highest TOC allowance is > 100% of the initial concentration, the TC allowance is 55.79%, and the IC allowance is 30.91%. The formation of metal hydroxides affects the efficiency of TOC removal in the electrocoagulation process, and higher electrolysis times lead to higher TOC removal efficiency. Higher voltages also improve the coagulation and flotation processes in the reactor. Calcium concentration plays a role in enhancing the flocculation process and binding phosphonates from wastewater.

Modelling the predictive analysis of turbidity removal efficiency in the in-line coagulation and flocculation process

Coagulation and flocculation processes are commonly used in conventional water treatment plants to remove suspended solids from water. However, these methods often suffer from drawbacks such as high chemical consumption, sludge generation, and the need for huge areas, leading to high construction costs. To address these limitations, this study investigated the performance of in-line coagulation and flocculation processes as an alternative to conventional methods. The objectives were to determine the efficiency of in-line coagulation and flocculation, understand the underlying mechanisms, establish optimal operating conditions and design criteria, and to develop theoretical models for predicting turbidity removal efficiency in the in-line coagulation-flocculation process. Experiments were conducted using a continuous setup consisting of a static mixer and a 35-m helically coiled hydraulic tube flocculator.Various operating parameters, including water flow rate (100 – 800 L/hr), initial turbidity (20 – 200 NTU), and coagulant types (aluminum sulfate, poly aluminum chloride, aluminum chlorohydrate, and ferric chloride), were examined. The results demonstrated that aluminum sulfate was the appropriate coagulant for the water characteristics studied, and the in-line coagulation and flocculation processes achieved turbidity removal efficiencies of approximately 91 % under all operating conditions, with a notable 97 % removal efficiency achieved at a liquid flow rate of 600 L/hr, with a Gt value of 21,715 and an overflow rate of 2 m/hr. A prediction model of turbidity removal efficiency was developed, showing good agreement between experimental and predicted removal efficiency model, with an average deviation of about 20 %. This model can aid in determining optimal operating conditions and serve as a hybrid process in future water treatment systems, potentially applicable to other separation processes as well.

Fibrinogen post-translational modifications are biochemical determinants of fibrin clot properties and interactions.

The structure of fibrinogen and resulting fibrin formed during the coagulation process have important biological functions in human physiology and pathology. Fibrinogen post-translational modifications (PTMs) increase the complexity of the protein structure and many studies have emphasized thepotential associations of post-translationally altered fibrinogen with the formation of a fibrin clot with a prothrombotic phenotype. However, the mechanisms by which PTMs exert their action on fibrinogen, and their causal association with disease pathogenesis are relatively unexplored. Moreover, the significance of fibrinogen PTMs in health has yet to be appreciated. In this review, the impact of fibrinogen PTMs on fibrinogen functionality is discussed from a biochemical perspective, emphasizing the potential mechanisms by which PTMs mediate the acquisition of altered fibrinogen properties. A brief discussion on dysfibrinogenemias of genetic origin, attributed to single point variations of the fibrinogen molecule is also provided, highlighting the influence that amino acid properties have on fibrinogen structure, properties, and molecular interactions that arise during thrombus formation.

Enhancing microplastic removal from natural water using coagulant aids

Microplastic (MP) pollution poses a significant environmental challenge, underscoring the need for improved water treatment methods. This study investigates the effectiveness of coagulation, flocculation, and sedimentation processes for removing microbeads, focusing on key factors that influence removal efficiency. Among the coagulants tested, polyaluminium chloride (PAC) demonstrated superior performance by enhancing the aggregation of microplastics with flocs. Optimal treatment conditions were determined to be 0.4 mmol/L PAC and 3 mg/L polyacrylamide (PAM) at pH 8 (before adding PAC), with rapid stirring at 240 rpm for 1 min, followed by slow stirring at 35 rpm for 13 min, and a sedimentation period of 25 min. Under these conditions, removal efficiencies exceeded 95 % for a range of microbeads (10–1000 μm: Polystyrene (PS), Polypropylene (PP), Polyvinyl chloride (PVC), Polyamide (PA), Polyethylene (PE), and Polyurethane (PU)) from natural water samples. Without PAM, PAC alone achieved a 97 % removal rate for PS microbeads. The addition of PAM maintained high removal efficiency, while aluminium sulphate and ferric chloride were less effective, with removal rates of 67 % and 48 % for PS microbeads, respectively. PAM enhanced MP removal across various coagulants and microbead types, with maximum efficiency observed at PAM concentrations of ≥3 mg/L. The treatment also demonstrated that organic matter in Regent's Park pond water could further improve MP removal. Size significantly impacts removal efficiency: larger microbeads (1 mm to >250 μm) were removed more effectively (95 %) compared to smaller ones (10 to <250 μm), which had a lower removal rate of 49 %. Denser microbeads like PVC (density 1.38 g/cm³) settled more efficiently than lighter microbeads such as PE (density 0.97 g/cm³). These findings suggest a need for advanced technologies to better remove lighter, smaller MPs from water.

Calcium Ion-Coupled Polyphosphates with Different Degrees of Polymerization for Bleeding Control.

The development of efficient hemostatic materials is crucial for achieving rapid hemorrhage control and effective wound healing. Inorganic polyphosphate (polyP) is recognized as an effective modulator of the blood coagulation process. However, the specific effect of polyP chain length on coagulation is not yet fully understood. Furthermore, calcium ions (Ca2+) are essential for the coagulation process, promoting multiple enzyme-catalyzed reactions within the coagulation cascade. Hence, calcium ion-coupled polyphosphate powders with three different degrees of polymerization (CaPP-n, n = 20, 50, and 1500) are synthesized by an ion-exchange reaction. CaPP exhibits a crystalline phase at a low polymerization degree and transitions to an amorphous phase as the polymerization degree increases. Notably, the addition of Ca2+ enhances the wettability of polyP, and CaPP promotes hemostasis, with varying degrees of effectiveness related to chain length. CaPP-50 exhibits the most promising hemostatic performance, with the lowest blood clotting index (BCI, 12.1 ± 0.7%) and the shortest clotting time (302.0 ± 10.5 s). By combining Ca2+ with polyP of medium-chain length, CaPP-50 demonstrates an enhanced ability to accelerate the adhesion and activation of blood cells, initiate the intrinsic coagulation cascade, and form a stable blood clot, outperforming both CaPP-20 and CaPP-1500. The hemostatic efficacy of CaPP-50 is further validated using rat liver bleeding and femoral artery puncture models. CaPP-50 is proven to possess hemostatic properties comparable to those of commercial calcium-based zeolite hemostatic powder and superior to kaolin. In addition, CaPP-50 exhibits excellent biocompatibility and long-term storage stability. These results suggest that CaPP-50 has significant clinical and commercial potential as an active inorganic hemostatic agent for rapid control of bleeding.

The Potential of Elephantorrhiza goetzei Seed Extract as a Coagulant for Household Drinking Water Treatment

ABSTRACTPoor access to adequate, clean, and safe water is one of the greatest world problems people encounter. There has been considerable attention in recent times toward the use of natural coagulants for water treatment. This study seeks to promote this by investigating the potential of Elephantorrhiza goetzei (E. goetzei) seed extract as natural coagulants for water treatment. This included the determination of key ingredients responsible for the coagulation process and optimal dosages for the removal of turbidity, fluoride, manganese, and iron. The residual content of organic matter in the treated water and the quality of sludge produced were also investigated. The methodology consisted of a proximate analysis procedure to investigate the active ingredient(s) responsible for coagulation and standard jar tests. Standard methods were used for the analyses. Coagulant dosages ranging from 0 to 300 mg/L at a rapid mixing speed of 120 rpm for 1 min, a slow mixing speed of 30 rpm for 15 min, and a settling time of 15 min were used for the jar test. The analysis of variance (ANOVA) using IBM SPSS Version 20 was conducted, and regression models were developed to determine the effect of coagulant dosage on turbidity, pH, total dissolved solids, fluoride, iron, manganese, chemical oxygen demand (COD), nitrogen, and phosphorus. The results obtained from the proximate analysis of E. goetzei seed extract show that values of 5.25%, 21.40%, 8.23%, 32.99%, 2.20%, and 29.93% were obtained for moisture, crude protein, crude fiber, fat, ash, and carbohydrate content, respectively. Moreover, seed extract of E. goetzei achieved removal efficiencies up to 94.8%, 50.1%, 90.0%, and 53.9% for turbidity, fluoride, iron, and manganese in water, respectively. The coagulant has the potential to achieve the desired World Health Organization (WHO) drinking water standards for turbidity, fluoride, iron, and manganese. The COD increased from 55.3 to 419.3 mg/L as the coagulant dosage increased from 0 to 100 mg/L. This could cause an unwanted rise in microbial activities, affecting the microbiological quality of the treated water. The total nitrogen and phosphorus concentrations obtained in the sludge at 100 mg/L were 0.343 and 0.194 µg/kg, respectively, and this compromises its attractiveness for agricultural reuse purposes.

Study of Temperature Effect on Ferric Chloride Performance in Water Coagulation

Temperature has an essential function and becomes an important parameter in a coagulation process as itinfluences metal ion hydrolysis reaction rate. In order to get further explanation, a research using ferric chloride as a coagulant has been performed. The research aims tofind out more about the effect of temperature on coagulation performance using turbidity, floc size, ferric, and water content parameter. The temperature 5℃ - 45℃ with an interval of 5ºC has been investigated to simulate field (i.e. outside) measurements in winter, spring and autumn, and summer, respectively. The result shows coagulation performance isaffected by temperature elevation. Turbidity gets lower for temperature between 5℃-40℃ and gets higher for temperature 45℃. Floc size becomes larger for temperature 5℃-40℃ and becomes smaller as temperature increase.At temperature between 5ºC and 15ºC, the higher the temperature, the lower the ferric residue produced in coagulation water. For floc water contents, there is no virtually link between temperature and floc water contents. Temperature correlated well with turbidity value (-0.876) and floc size (0.985) but not correlated with ferric residue (0.366)and floc water content (0.179).

Applying the experiment design approach to minimize pollutants in olive mill wastewater using aluminum sulfate and ferric chloride as coagulants. West Bank—occupied Palestinian territories

A significant environmental contaminant in the West Bank and the Mediterranean Basin is olive mill wastewater (OMWW). OMWW was released between mid-September and mid-November, when harvesting was taking place. This led to environmental issues with soil, water resources, and the ecology. The optimization of the removal of organic compounds as total suspended solids (TSS), chemical oxygen demand (COD), and total polyphenols group (TP) pollutants is the main goal of this study. Both aluminum sulfate (AS) and ferric chloride (FC) are utilized as coagulants. The ideal dosages, coagulant types, and pH values to reduce the concentration of these pollutants were determined using the Design of Expert program (DoE). For the AS and FC, the optimal pH range is between 4 and 5, which reduces the TSS by roughly 93 % and 80 %, respectively. By using AS and FC, respectively, COD was removed at rates of 68 % and 58 %, and 0.5 g/l was the ideal coagulant concentration dose. The most important factor affecting the elimination procedure was the pH level. The outcomes show that those three contaminants can be successfully eliminated by the coagulation process. TSS ranges between 90 % and 96 %, COD between 53 % and 73 %, and TP between 11 % and 37 % when the two coagulate salts are used

Increasing the Efficiency of Wastewater Treatment by Using a Mixing Chamber in a Combined Filter

A combined scheme for wastewater treatment is proposed using a combined filter, which includes a reagent treatment section, a mixing chamber, a contact flocculation chamber and a sand-loaded filter. The main features of the operation of the mixing chamber located inside the filter housing are considered, which ensures the intensification of the coagulation process, due to the continuity of the coagulating and filtering process in a single housing without interrupting the process, due to which the flakes are not destroyed when moving from stage to stage. To confirm the efficiency of the mixing chamber, a number of laboratory experiments were carried out on model and river water. It has been confirmed that the use of the developed mixing chamber improves the filtration process by 15 to 30%. It was concluded that intensification of the filtration process would improve the efficiency of treatment facilities as a whole and ensure the quality of water for discharge into water bodies.

Simulation of the effect of hemolysis on thrombosis in blood-contacting medical devices

Heart failure, broadly characterized by the gradual decline of the ability of the heart to maintain adequate blood flow throughout the body's vascular network of veins and arteries, is one of the leading causes of death worldwide. Mechanical Circulatory Support is one of the few available alternative interventions for late-stage heart failure with reduced ejection fraction. A ventricular assist device is surgically implanted and connected to the left and or right heart ventricles to provide additional bloodflow, off-loading the work required by the heart to maintain circulation. Modern mechanical circulatory support devices generate non-physiological flow conditions that can lead to the damage and rupture of blood cells (hemolysis), and the formation of blood clots (thrombosis), which pose severe health risks to the patient. It is essential to improve prediction tools for blood damage to reduce the risk of hemolysis and thrombosis. A simulation-based approach examines the interaction between hemolysis and thrombosis. Incompressible finite-volume computational fluid dynamics simulations are executed on an open-hub axial flow ventricular assist device. A continuum model of thrombosis and the intrinsic coagulation process is extended to include the effect of hemolysis. The model accounts for the effect of activation of platelets by shear stress, paracrine signaling, adhesion, and hemoglobin and ADP released during hemolysis. The effect of hemolysis with thrombosis is modelled by accounting for the hyper-adhesivity of von-Willebrand Factor on extracellular hemoglobin, and the increased rate of platelet activation induced by ADP release. Thrombosis is assessed at varying inflow rates and rotor speeds, and cases are executed where thrombosis is affected by ADP release and Hb-induced hyper-adhesivity. It is found that there is a non-negligible effect from hemolysis on thrombosis across a range of rotor speeds, and that hyperadhesivity plays a dominant role in thrombus formation in the presence of hemolysis.