Coacervate Droplets Research Articles

An inorganic mineral-based protocell with prebiotic radiation fitness

Protocell fitness under extreme prebiotic conditions is critical in understanding the origin of life. However, little is known about protocell’s survival and fitness under prebiotic radiations. Here we present a radioresistant protocell model based on assembly of two types of coacervate droplets, which are formed through interactions of inorganic polyphosphate (polyP) with divalent metal cation and cationic tripeptide, respectively. Among the coacervate droplets, only the polyP-Mn droplet is radiotolerant and provides strong protection for recruited proteins. The radiosensitive polyP-tripeptide droplet sequestered with both proteins and DNA could be encapsulated inside the polyP-Mn droplet, and form into a compartmentalized protocell. The protocell protects the inner nucleoid-like condensate through efficient reactive oxygen species’ scavenging capacity of intracellular nonenzymic antioxidants including Mn-phosphate and Mn-peptide. Our results demonstrate a radioresistant protocell model with redox reaction system in response to ionizing radiation, which might enable the protocell fitness to prebiotic radiation on the primitive Earth preceding the emergence of enzyme-based fitness. This protocell might also provide applications in synthetic biology as bioreactor or drug delivery system.

Interfacial Assembly of Bacterial Microcompartment Shell Proteins in Aqueous Multiphase Systems.

Compartments are a fundamental feature of life, based variously on lipid membranes, protein shells, or biopolymer phase separation. Here, this combines self-assembling bacterial microcompartment (BMC) shell proteins and liquid-liquid phase separation (LLPS) to develop new forms of compartmentalization. It is found that BMC shell proteins assemble at the liquid-liquid interfaces between either 1) the dextran-rich droplets and PEG-rich continuous phase of a poly(ethyleneglycol)(PEG)/dextran aqueous two-phase system, or 2) the polypeptide-rich coacervate droplets and continuous dilute phase of a polylysine/polyaspartate complex coacervate system. Interfacial protein assemblies in the coacervate system are sensitive to the ratio of cationic to anionic polypeptides, consistent with electrostatically-driven assembly. In both systems, interfacial protein assembly competes with aggregation, with protein concentration and polycation availability impacting coating. These two LLPS systems are then combined to form a three-phase system wherein coacervate droplets are contained within dextran-rich phase droplets. Interfacial localization of BMC hexameric shell proteins is tunable in a three-phase system by changing the polyelectrolyte charge ratio. The tens-of-micron scale BMC shell protein-coated droplets introduced here can accommodate bioactive cargo such as enzymes or RNA and represent a new synthetic cell strategy for organizing biomimetic functionality.

Biofunctional coacervate-based artificial protocells with membrane-like and cytoplasm-like structures for the treatment of persistent hyperuricemia

Coacervate droplets formed by liquid-liquid phase separation have attracted considerable attention due to their ability to enrich biomacromolecules while preserving their bioactivities. However, there are challenges to develop coacervate droplets as delivery vesicles for therapeutics resulting from the lack of physiological stability and inherent lack of membranes in coacervate droplets. Herein, polylysine-polynucleotide complex coacervate droplets with favorable physiological stability are formulated to efficiently and facilely concentrate small molecules, biomacromolecules and nanoparticles without organic solvents. To improve the biocompatibility, the PEGylated phospholipid membrane is further coated on the surface of the coacervate droplets to prepare coacervate-based artificial protocells (ArtPC) with membrane-like and cytoplasm-like structures. The ArtPC can confine the cyclic catalytic system of uricase and catalase inside to degrade uric acid and deplete the toxicity of H2O2. This biofunctional ArtPC effectively reduces blood uric acid levels and prevents renal injuries in mice with persistent hyperuricemia. The ArtPC-based therapy can bridge the disciplines of synthetic biology, pharmaceutics and therapeutics.

Construction of Membraneless and Multicompartmentalized Coacervate Protocells Controlling a Cell Metabolism-like Cascade Reaction.

In recent years, there has been growing attention to designing synthetic protocells, capable of mimicking micrometric and multicompartmental structures and highly complex physicochemical and biological processes with spatiotemporal control. Controlling metabolism-like cascade reactions in coacervate protocells is still challenging since signal transduction has to be involved in sequential and parallelized actions mediated by a pH change. Herein, we report the hierarchical construction of membraneless and multicompartmentalized protocells composed of (i) a cytosol-like scaffold based on complex coacervate droplets stable under flow conditions, (ii) enzyme-active artificial organelles and a substrate nanoreservoir capable of triggering a cascade reaction between them in response to a pH increase, and (iii) a signal transduction component based on the urease enzyme capable of the conversion of an exogenous biological fuel (urea) into an endogenous signal (ammonia and pH increase). Overall, this strategy allows a synergistic communication between their components within the membraneless and multicompartment protocells and, thus, metabolism-like enzymatic cascade reactions. This signal communication is transmitted through a scaffold protocell from an "inactive state" (nonfluorescent protocell) to an "active state" (fluorescent protocell capable of consuming stored metabolites).

Progress in constructing functional coacervate systems using microfluidics

AbstractCoacervates formed by liquid‐liquid phase separation play significant roles in a variety of intracellular and extracellular biological processes. Recently, substantial efforts have been invested in creating protocells using coacervates. Microfluidic technology has rapidly gained prominence in this area due to its capability to construct monodisperse and stable coacervate droplets. This review highlights recent advancements in utilizing microfluidic devices to construct coacervate‐core‐vesicle (COV) systems. These COV systems can be employed to realize the sequestration and release of biomolecules as well as to control enzymatic reactions within the coacervate systems in a spatiotemporal manner. Lastly, we delve into the current challenges and opportunities related to the development of functional coacervate systems based on microfluidic technology.

Understanding the Impacts of Molecular and Macromolecular Crowding Agents on Protein-Polymer Complex Coacervates.

Complex coacervation refers to the liquid-liquid phase separation (LLPS) process occurring between charged macromolecules. The study of complex coacervation is of great interest due to its implications in the formation of membraneless organelles (MLOs) in living cells. However, the impacts of the crowded intracellular environment on the behavior and interactions of biomolecules involved in MLO formation are not fully understood. To address this knowledge gap, we investigated the effects of crowding on a model protein-polymer complex coacervate system. Specifically, we examined the influence of sucrose as a molecular crowder and polyethylene glycol (PEG) as a macromolecular crowder. Our results reveal that the presence of crowders led to the formation of larger coacervate droplets that remained stable over a 25-day period. While sucrose had a minimal effect on the physical properties of the coacervates, PEG led to the formation of coacervates with distinct characteristics, including higher density, increased protein and polymer content, and a more compact internal structure. These differences in coacervate properties can be attributed to the effects of crowders on individual macromolecules, such as the conformation of model polymers, and nonspecific interactions among model protein molecules. Moreover, our results show that sucrose and PEG have different partition behaviors: sucrose was present in both the coacervate and dilute phases, while PEG was observed to be excluded from the coacervate phase. Collectively, our findings provide insights into the understanding of crowding effects on complex coacervation, shedding light on the formation and properties of coacervates in the context of MLOs.

The Role of Chemically Innocent Polyanions in Active, Chemically Fueled Complex Coacervate Droplets.

Complex coacervation describes the liquid-liquid phase separation of oppositely charged polymers. Active coacervates are droplets in which one of the electrolyte's affinity is regulated by chemical reactions. These droplets are particularly interesting because they are tightly regulated by reaction kinetics. For example, they serve as a model for membraneless organelles that are also often regulated by biochemical transformations such as post-translational modifications. They are also a great protocell model or could be used to synthesize life-they spontaneously emerge in response to reagents, compete, and decay when all nutrients have been consumed. However, the role of the unreactive building blocks, e.g., the polymeric compounds, is poorly understood. Here, we show the important role of the chemically innocent, unreactive polyanion of our chemically fueled coacervation droplets. We show that the polyanion drastically influences the resulting droplets' life cycle without influencing the chemical reaction cycle-either they are very dynamic or have a delayed dissolution. Additionally, we derive a mechanistic understanding of our observations and show how additives and rational polymer design help to create the desired coacervate emulsion life cycles.

Coacervate droplets: Emerging vehicles for intracellular delivery

Coacervate droplets: Emerging vehicles for intracellular delivery

Competition between β-Sheet and Coacervate Domains Yields Diverse Morphologies in Mixtures of Oppositely Charged Homochiral Polypeptides.

Biomolecular assembly processes involving competition between specific intermolecular interactions and thermodynamic phase instability have been implicated in a number of pathological states and technological applications of biomaterials. As a model for such processes, aqueous mixtures of oppositely charged homochiral polypeptides such as poly-l-lysine and poly-l-glutamic acid have been reported to form either β-sheet-rich solid-like precipitates or liquid-like coacervate droplets depending on competing hydrogen bonding interactions. Herein, we report studies of polypeptide mixtures that reveal unexpectedly diverse morphologies ranging from partially coalescing and aggregated droplets to bulk precipitates, as well as a previously unreported re-entrant liquid-liquid phase separation at high polypeptide concentration and ionic strength. Combining our experimental results with all-atom molecular dynamics simulations of folded polypeptide complexes reveals a concentration dependence of β-sheet-rich secondary structure, whose relative composition correlates with the observed macroscale morphologies of the mixtures. These results elucidate a crucial balance of interactions that are important for controlling morphology during coacervation in these and potentially similar biologically relevant systems.

Coacervate Droplets for Synthetic Cells.

The design and construction of synthetic cells - human-made microcompartments that mimic features of living cells - have experienced a real boom in the past decade. While many efforts have been geared toward assembling membrane-bounded compartments, coacervate droplets produced by liquid-liquid phase separation have emerged as an alternative membrane-free compartmentalization paradigm. Here, the dual role of coacervate droplets in synthetic cell research is discussed: encapsulated within membrane-enclosed compartments, coacervates act as surrogates of membraneless organelles ubiquitously found in living cells; alternatively, they can be viewed as crowded cytosol-like chassis for constructing integrated synthetic cells. After introducing key concepts of coacervation and illustrating the chemical diversity of coacervate systems, their physicochemical properties and resulting bioinspired functions are emphasized. Moving from suspensions of free floating coacervates, the two nascent roles of these droplets in synthetic cell research are highlighted: organelle-like modules and cytosol-like templates. Building the discussion on recent studies from the literature, the potential of coacervate droplets to assemble integrated synthetic cells capable of multiple life-inspired functions is showcased. Future challenges that are still to be tackled in the field are finally discussed.

Autonomic Integration in Nested Protocell Communities.

The self-driven organization of model protocells into higher-order nested cytomimetic systems with coordinated structural and functional relationships offers a step toward the autonomic implementation of artificial multicellularity. Here, we describe an endosymbiotic-like pathway in which proteinosomes are captured within membranized alginate/silk fibroin coacervate vesicles by guest-mediated reconfiguration of the host protocells. We demonstrate that interchange of coacervate vesicle and droplet morphologies through proteinosome-mediated urease/glucose oxidase activity produces discrete nested communities capable of integrated catalytic activity and selective disintegration. The self-driving capacity is modulated by an internalized fuel-driven process using starch hydrolases sequestered within the host coacervate phase, and structural stabilization of the integrated protocell populations can be achieved by on-site enzyme-mediated matrix reinforcement involving dipeptide supramolecular assembly or tyramine-alginate covalent cross-linking. Our work highlights a semi-autonomous mechanism for constructing symbiotic cell-like nested communities and provides opportunities for the development of reconfigurable cytomimetic materials with structural, functional, and organizational complexity.

Effect of Polypeptide Complex Coacervate Microenvironment on Protonation of a Guest Molecule.

Complex coacervate droplets formed by the liquid-liquid phase separation of polyelectrolyte solutions capture several important features of membraneless organelles including their ability to accumulate guest molecules and to provide distinct microenvironments. Here, we examine how polyions in complex coacervates can influence localized guest molecules, leading to a shifted protonation state of the guest molecule in response to its electrostatic environment. A fluorescent ratiometric pH indicator dye was used as a model guest molecule able to report its protonation state in the coacervate phase. Experimentally observed differences in dye-reported local apparent pH inside versus outside of coacervate droplets were largest for polyion pairs having lower salt stabilities and/or larger polyion length mismatch, which we attribute to the relative concentration of open sites on polyions within the coacervates based on theoretical calculations. Using the transfer matrix method, we confirmed that theoretical phase diagrams and critical salt stabilities generated for each polyion pair were consistent with experimental turbidity measurements and estimated the amount of available binding sites on polyions for guest molecules. We conclude that dye molecules likely experience an effective pKa shift due to interactions with coacervate polyions rather than reporting directly on local proton concentrations. Such a local pKa shift can also be anticipated for other guest molecules having protonatable groups, including, for example, many metabolites, ligands, and/or drug molecules that partition into coacervates or membraneless organelles based on ion pairing interactions.

Physical, interfacial and foaming properties of different mung bean protein fractions

Mung bean is an upcoming source of plant proteins with good foaming properties. The relation between its foaming properties and interfacial properties has not received much attention and was addressed in this work. To this end, five different mung bean protein fractions were produced. First, a protein-rich flour was obtained using dry fractionation, which was further processed into a protein mixture using mild wet fractionation to remove starch granules and other insoluble components. The protein mixture was further treated by isoelectric point precipitation to obtain a globulin- and albumin-rich fraction. Finally, we used the protein nativity of the dry fractionated flour to create protein coacervate droplets via liquid-liquid phase separation of the proteins at slightly acidic pH. The protein-rich coacervate droplets were heated and cross-linked into gelled particles, or “protein colloids”. The interfacial and foam-stabilising properties of the flour and protein mixture were dominated by the globulins, producing a foam with a poor stability. Also, non-proteinaceous components, such as starch granules, phenols and phospholipids, seemed to reduce foam stability. Albumins formed substantially stiffer interfaces, leading to foams with a high stability. The highest foam stability was observed for the protein colloids, which we attribute to the formation of stiff interfacial layers and probably also pinning of the lamellae in the foams by the protein colloids. In summary, mung bean albumins were found to possess substantially better foaming properties than the globulins, but especially mung bean protein colloids are a promising candidate for a plant-based foam ingredient.

Coacervate-Based Plexcitonic Assembly toward Peroxidase-like Activity and Ultrasensitive Glucose Sensing

Inbuilt catalytic centers anchored inside the confined architecture of artificial nanoreactors have gained tremendous attention owing to their vast applicability in various catalytic transformations. However, designing homogeneously distributed catalytic units with exposed surfaces in confined environment is a challenging task. Here, we have utilized quantum dot (QD)-embedded coacervate droplets (QD-Ds) as a confined compartment for the in situ synthesis of gold nanoparticles (Au NPs) without any additional reducing agent. High-resolution transmission electron microscopy images reveal homogeneous distribution of 5.6 ± 0.2 nm-sized Au NPs inside the QD-Ds (Au@QD-Ds). The in situ synthesized Au NPs are found to be stable over a period of 28 days without any agglomeration. Control experiments reveal that the free surface carboxylic acid groups of embedded QDs simultaneously act as reducing and stabilizing agents for Au NPs. Notably, these Au@QD-Ds exhibit superior peroxidase-like activity compared to bulk aqueous Au NPs and Au@QDs under similar experimental conditions. The observed peroxidase-like activity follows the classical Michaelis–Menten model inside the Au@QD-Ds via the fast electron-transfer pathway. The enhanced peroxidase-like activity has been explained by considering confinement, mass action, and the ligand-free surface of embedded Au NPs. The present plexcitonic nanocomposites exhibit excellent recyclability over several consecutive cycles without any compromise in their catalytic activity. Finally, a cascade reaction with glucose oxidase (GOx)-loaded Au@QD-Ds have been utilized for colorimetric detection of glucose with a limit of detection of 272 nM in solution as well as on filter paper. The present work highlights a facile and robust methodology for the fabrication of optically active functional hybrid plexcitonic assemblies and may find importance in various fields including bioanalytical chemistry and optoelectronics.

Development of Highly Fluorogenic Styrene Probes for Visualizing RNA in Live Cells.

Styrene dyes are useful imaging probes and fluorescent sensors due to their strong fluorogenic responses to environmental changes or binding macromolecules. Previously, indole-containing styrene dyes have been reported to selectively bind RNA in the nucleolus and cytoplasm. However, the application of these indole-based dyes in cell imaging is limited by their moderate fluorescence enhancement and quantum yields, as well as relatively high background associated with these green-emitting dyes. In this work, we have investigated the positional and electronic effects of the electron donor by generating regioisomeric and isosteric analogues of the indole ring. Select probes exhibited large Stokes shifts, enhanced molar extinction coefficients, and bathochromic shifts in their absorption and fluorescence wavelengths. In particular, the indolizine analogues displayed high membrane permeability, strong fluorogenic responses upon binding RNA, compatibility with fluorescence lifetime imaging microscopy (FLIM), low cytotoxicity, and excellent photostability. These indolizine dyes not only give rise to rapid, sensitive, and intense staining of nucleoli in live cells but can also resolve subnucleolar structures enabling highly detailed studies of nucleolar morphology. Furthermore, our dyes can partition into RNA coacervates and resolve the formation of multiphase complex coacervate droplets. These indolizine-containing styrene probes offer the highest fluorescence enhancement among the RNA-selective dyes reported in the literature; thus, these new dyes are excellent alternatives to the commercially available RNA dye, SYTO RNASelect, for visualizing RNA in live cells and in vitro.

Non-enzymatic oligonucleotide ligation in coacervate protocells sustains compartment-content coupling

Modern cells are complex chemical compartments tightly regulated by an underlying DNA-encoded program. Achieving a form of coupling between molecular content, chemical reactions, and chassis in synthetic compartments represents a key step to the assembly of evolvable protocells but remains challenging. Here, we design coacervate droplets that promote non-enzymatic oligonucleotide polymerization and that restructure as a result of the reaction dynamics. More specifically, we rationally exploit complexation between end-reactive oligonucleotides able to stack into long physical polymers and a cationic azobenzene photoswitch to produce three different phases—soft solids, liquid crystalline or isotropic coacervates droplets—each of them having a different impact on the reaction efficiency. Dynamical modulation of coacervate assembly and dissolution via trans-cis azobenzene photo-isomerization is used to demonstrate cycles of light-actuated oligonucleotide ligation. Remarkably, changes in the population of polynucleotides during polymerization induce phase transitions due to length-based DNA self-sorting to produce multiphase coacervates. Overall, by combining a tight reaction-structure coupling and environmental responsiveness, our reactive coacervates provide a general route to the non-enzymatic synthesis of polynucleotides and pave the way to the emergence of a primitive compartment-content coupling in membrane-free protocells.

Osmotic-Induced Reconfiguration and Activation in Membranized Coacervate-Based Protocells.

The design and construction of synthetic protocells capable of stimuli response and homeostatic regulation is an important challenge for synthetic protobiology. Here, we develop a step toward the construction of model protocells capable of a hypotonic stress-induced volume response that facilitates an increase in membrane permeability and the triggering of endogenous enzyme reactions. We describe a facile self-transformation process for constructing single- or multichambered molecularly crowded protocells based on the osmotic reconfiguration of lipid-coated coacervate droplets into multicompartmentalized coacervate vesicles. Hypotonic swelling broadens membrane permeability and increases transmembrane transport such that protease-based hydrolysis and enzyme cascades can be triggered and enhanced within the protocells by osmotically induced expansion. Specifically, we demonstrate how the enhanced production of nitric oxide (NO) within the swollen coacervate vesicles can be used to induce in vitro blood vessel vasodilation in thoracic artery rings. Our approach provides opportunities for designing reconfigurable model protocells capable of homeostatic volume regulation, dynamic structural reorganization, and adaptive functionality in response to changes in environment osmolarity, and could find applications in biomedicine, cellular diagnostics, and bioengineering.

Encoding Coacervate Droplets with Paramagnetism for Dynamical Reconfigurability and Spatial Addressability.

It is an ongoing endeavor in chemistry and materials science to regulate coacervate droplets on a physiologically relevant spatiotemporal scale to ultimately match or even surpass living cells' precision, complexity, and functionality. Herein, we develop a magnetic strategy orthogonal to the thermal, pH, light, or chemical counterparts that are commonly employed by biotic or artificial systems; its successful implementation thus adds a missing piece to the current arsenal of manipulative methodologies. Specifically, we paramagnetize the otherwise diamagnetic coacervate droplets by cooperatively combining paramagnetic ingredients (including organic radicals, metal ions, and Fe3O4 nanoparticles) and coacervate ingredients to obtain "MagCoa" droplets. A simple model is derived theoretically to account for migration and division of MagCoa droplets in an uneven magnetic field. Experimentally, we produce an array of compartmentalized and monodispersed droplets using microfluidics and magnetically steer them with uniformity and synchronicity. We design and fabricate spatial magnetic modulators to engineer the landscape of a magnetic field that, in turn, directs the MagCoa droplets into predesigned patterns in a reconfigurable fashion. These programmable liquid patterns can be potentially extended to dynamic assembly and information encryption. We envision that the toolbox established here is of generality and multitudes to serve as a practical guide to control droplets magnetically.

Assembly of biomimetic microreactors using caged-coacervate droplets.

Complex coacervates are liquid-like droplets that can be used to create adaptive cell-like compartments. These compartments offer a versatile platform for the construction of bioreactors inspired by living cells. However, the lack of a membrane significantly reduces the colloidal stability of coacervates in terms of fusion and surface wetting, which limits their suitability as compartments. Here, we describe the formation of caged-coacervates surrounded by a semipermeable shell of silica nanocapsules. We demonstrate that the silica nanocapsules create a protective shell that also regulates the molecular transport of water-soluble compounds as a function of nanocapasule size. The adjustable semipermeability and intrinsic affinity of enzymes for the interior of the caged-coacervates allowed us to assemble biomimetic microreactors with enhanced colloidal stability.

Designing negative feedback loops in enzymatic coacervate droplets.

Membraneless organelles within the living cell use phase separation of biomolecules coupled with enzymatic reactions to regulate cellular processes. The diverse functions of these biomolecular condensates motivate the pursuit of simpler in vitro models that exhibit primitive forms of self-regulation based on internal feedback mechanisms. Here, we investigate one such model based on complex coacervation of the enzyme catalase with an oppositely charge polyelectrolyte DEAE-dextran to form pH-responsive catalytic droplets. Upon addition of hydrogen peroxide "fuel", enzyme activity localized within the droplets causes a rapid increase in the pH. Under appropriate conditions, this reaction-induced pH change triggers coacervate dissolution owing to its pH-responsive phase behavior. Notably, this destabilizing effect of the enzymatic reaction on phase separation depends on droplet size owing to the diffusive delivery and removal of reaction components. Reaction-diffusion models informed by the experimental data show that larger drops support larger changes in the local pH thereby enhancing their dissolution relative to smaller droplets. Together, these results provide a basis for achieving droplet size control based on negative feedback between pH-dependent phase separation and pH-changing enzymatic reactions.