CO2 Reduction Reaction Activity Research Articles

Understanding the Electrochemical Carbon Dioxide Reduction Reaction Mechanism of Lattice Tuning of Copper by Silver Single-Crystal Surface.

Intermolecular interactions and adsorbate coverage on a metal electrode's surface/interface play an important role in CO2 reduction reaction (CO2RR). Herein, the activity and selectivity of CO2RR on bimetallic electrode, where a full monoatomic Cu layer covers on Ag surface (CuML/Ag) are investigated by using density functional theory calculations. The surface geometric and electronic structure results indicate that there is high electrocatalytic activity for CO2RR on the CuML/Ag electrode. Specifically, the CuML/Ag surface can accelerate the H2O and CO2 adsorption and hydrogenation while lowering the reaction energy of the rate-determining step. The structure parameters of chemisorbed CO2 with and without H2O demonstrate that activated H2O not only promotes the C-O dissociation but also provides the protons required for CO2RR on the CuML/Ag electrode surface. Furthermore, the various reaction mechanism diagrams indicate that the CuML/Ag electrode has high selectivity for CO2RR, and the efficiency of products can be regulated by modulating the reaction's electric potential.

Data-Driven Design of Single-Atom Electrocatalysts with Intrinsic Descriptors for Carbon Dioxide Reduction Reaction

AbstractThe strategic manipulation of the interaction between a central metal atom and its coordinating environment in single-atom catalysts (SACs) is crucial for catalyzing the CO2 reduction reaction (CO2RR). However, it remains a major challenge. While density-functional theory calculations serve as a powerful tool for catalyst screening, their time-consuming nature poses limitations. This paper presents a machine learning (ML) model based on easily accessible intrinsic descriptors to enable rapid, cost-effective, and high-throughput screening of efficient SACs in complex systems. Our ML model comprehensively captures the influences of interactions between 3 and 5d metal centers and 8 C, N-based coordination environments on CO2RR activity and selectivity. We reveal the electronic origin of the different activity trends observed in early and late transition metals during coordination with N atoms. The extreme gradient boosting regression model shows optimal performance in predicting binding energy and limiting potential for both HCOOH and CO production. We confirm that the product of the electronegativity and the valence electron number of metals, the radius of metals, and the average electronegativity of neighboring coordination atoms are the critical intrinsic factors determining CO2RR activity. Our developed ML models successfully predict several high-performance SACs beyond the existing database, demonstrating their potential applicability to other systems. This work provides insights into the low-cost and rational design of high-performance SACs.

Proton-Coupled Electron Transfer on Cu2O/Ti3C2Tx MXene for Propane (C3H8) Synthesis from Electrochemical CO2 Reduction.

Electrochemical CO2 reduction reaction (CO2RR) to produce value-added multi-carbon chemicals has been an appealing approach to achieving environmentally friendly carbon neutrality in recent years. Despite extensive research focusing on the use of CO2 to produce high-value chemicals like high-energy-density hydrocarbons, there have been few reports on the production of propane (C3H8), which requires carbon chain elongation and protonation. A rationally designed 0D/2D hybrid Cu2O anchored-Ti3C2Tx MXene catalyst (Cu2O/MXene) is demonstrated with efficient CO2RR activity in an aqueous electrolyte to produce C3H8. As a result, a significantly high Faradaic efficiency (FE) of 3.3% is achieved for the synthesis of C3H8 via the CO2RR with Cu2O/MXene, which is ≈26 times higher than that of Cu/MXene prepared by the same hydrothermal process without NH4OH solution. Based on in-situ attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and density functional theory (DFT) calculations, it is proposed that the significant electrocatalytic conversion originated from the synergistic behavior of the Cu2O nanoparticles, which bound the *C2 intermediates, and the MXene that bound the *CO coupling to the C3 intermediate. The results disclose that the rationally designed MXene-based hybrid catalyst facilitates multi-carbon coupling as well as protonation, thereby manipulating the CO2RR pathway.

Theoretical study on the electrochemical CO2 reduction performance of MoS2-supported Ni single atoms with transition metal substrate doping

In the context of increasing energy issues and climate change, the development of electrochemical CO2 reduction strategies using single atom catalysts (SACs) presents a viable solution by converting CO2 into high-value-added products. Transition metal dichalcogenides (TMDs) have emerged as the main candidates for SACs in electrocatalytic CO2 reduction reaction (CO2RR) catalysts. The regulation of the second coordination sphere of SACs is known to modulate their electronic structure and catalytic behavior. This study delves into the effect of transition metal-doped substrates on SACs. We employed spin-polarization density functional theory (DFT) to design a series of Ni/TM-MoS2 monolayer MoS2 materials, with transition metals (including Cr, Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, W, Re, Os, Ir, Pt and Au) substituting the Mo atoms and anchoring single atom Ni. Among them, six Ni/TM-MoS2 catalysts doped with Mn, Fe, Co, Ru, Rh, and Ir demonstrate enhanced CO2RR activity and selectivity when compared to unmodified Ni/MoS2. The Ni/Ru-MoS2 SAC exhibits the best catalytic activity and selectivity for formic acid production, with a limiting potential (UL) of -0.06 V. The incorporation of the metal-doped substrate lowers the work function of the catalyst, facilitating electron transfer and reaction progression. Furthermore, a volcanic relationship was observed between the work function and UL. This study provides strategic insights into the design and development of SACs, highlighting the potential for future modifications and applications.

Sulfur Modified Copper Nitride for Electrochemical CO2 Reduction Reaction

Metallic copper has been attracted attention as efficient catalyst for electrochemical CO2 reduction reaction (CO2RR). However, the activity of the catalyst with a single adsorption site is limited by the imbalance of the intermediate binding energy, so-called “scaling relationship”. [1] Therefore, it is crucial to break the scaling relationship between reaction intermediates in order to increase product selectivity and lower overpotential. One of the candidates to overcome this scaling relationship is metal sulfide. According to the computational study, since sulfur atoms work as an adsorption site, metal sulfide is expected to be a suitable catalyst for CO2RR with multiple adsorption sites.[2] In addition, surface modification by sulfur is also effective approach to enhance product selectivity in CO2RR. Increase of formate (HCOO-) selectivity by sulfur introduction on Cu has been reported in some previous reports.[3]-[5] On the other hand, the repulsion between the oxygen lone pair electrons of the CO2 molecule and the electronic clouds of the surface sulfur atoms become an obstacle on CO2RR.[6] A potential solution to this problem is the construction of sulfide-nitride composite. Because of the difference in electronegativity between nitrogen and metal or sulfur, it is considered that the electronic structure of the metal sulfide is altered to reduce the repulsion between oxygen and sulfur.[7] Based on these backgrounds, it is expected that the CO2RR activity of copper nitride (Cu3N) will be enhanced by sulfur introduction.Here, sulfur modified Cu3N with different amount of sulfur were synthesized by reflux method with some modification of previously reported method.[8] X-ray diffraction pattern and SEM-EDX elemental analysis result indicate that the sulfur ratio increases and copper sulfide (Cu2S) crystal phase appears with the amount of sulfur source precursor. CO2RR activity was evaluated in 0.1M KHCO3 electrolyte, and volcano trend was identified between the amount of sulfur and methane selectivity. Among all the catalysts including pure Cu3N and Cu2S which were synthesized by the same method, 4.2 mol% sulfur containing Cu3N showed the highest methane faradaic efficiency (41.4 %). This faradaic efficiency is more than 10 times higher than that of Cu3N (0.48 %) and Cu2S (1.3 %). This finding offers valuable insights into the sulfur role on the modified catalyst.

(Invited) Atomically Dispersed Metal Electrocatalysts for CO2 to CO Conversion: From Single to Dual Metal Sites

Carbon-supported nitrogen-coordinated single-metal site catalysts (i.e., M−N−C, M: Fe, Co, or Ni) are active for the electrochemical CO2 reduction reaction (CO2RR) to CO.(1) We comprehensively engineered FeN4 and NiNx sites for electrochemical CO2 reduction to CO considering the particle sizes of the catalysts, metal content, and the M−N (M: Fe or Ni) bond structures.(2, 3)The unique M-N-C model allows us to elucidate each factor′s role exclusively regarding the promotion of CO2 reduction.(4)Optimal particle sizes and Fe content provide favorable external factors to improve mass activity. Structural changes of M−N bonds controlled by thermal activation temperatures can intrinsically enhance CO selectivity and kinetic activity. Notably, the NiN3 active sites with optimal local structures formed at higher temperatures (e.g., 1200 °C) are intrinsically more active and CO-selective than NiN4, providing a new opportunity to design a highly active catalyst via populating NiN3 sites with increased density. Further improving their intrinsic activity and selectivity by tuning their N−M bond structures and coordination is limited. We further expand the coordination environments of M−N−C catalysts by designing dual-metal active sites.(5)The Ni-Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N-coordinated dual-metal site configurations are 2N-bridged (Fe-Ni)N6, in which FeN4 and NiN4 moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual-metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single-metal sites (FeN4 or NiN4) with improved intrinsic catalytic activity and selectivity.References Pan F, Zhang H, Liu K, Cullen D, More K, Wang M, et al. Unveiling Active Sites of CO2 Reduction on Nitrogen-Coordinated and Atomically Dispersed Iron and Cobalt Catalysts. ACS Catalysis. 2018;8(4):3116-22.Li Y, Adli NM, Shan W, Wang M, Zachman MJ, Hwang S, et al. Atomically dispersed single Ni site catalysts for high-efficiency CO2 electroreduction at industrial-level current densities. Energy & Environmental Science. 2022;15(5):2108-19.Mohd Adli N, Shan W, Hwang S, Samarakoon W, Karakalos S, Li Y, et al. Engineering Atomically Dispersed FeN4 Active Sites for CO2 Electroreduction. Angewandte Chemie International Edition. 2021;60(2):1022-32.Li J, Zhang H, Samarakoon W, Shan W, Cullen DA, Karakalos S, et al. Thermally Driven Structure and Performance Evolution of Atomically Dispersed FeN4 Sites for Oxygen Reduction. Angewandte Chemie International Edition. 2019;58(52):18971-80.Li Y, Shan W, Zachman MJ, Wang M, Hwang S, Tabassum H, et al. Atomically Dispersed Dual-Metal Site Catalysts for Enhanced CO2 Reduction: Mechanistic Insight into Active Site Structures. Angewandte Chemie International Edition. 2022;61(28):e202205632.

Quantitative Analysis and Manipulation of Alkali Metal Cations at the Cathode Surface in Membrane Electrode Assembly Electrolyzers for CO2 Reduction Reactions.

The stable operation of the CO2 reduction reaction (CO2RR) in membrane electrode assembly (MEA) electrolyzers is known to be hindered by the accumulation of bicarbonate salt, which are derived from alkali metal cations in anolytes, on the cathode side. In this study, we conducted a quantitative evaluation of the correlation between the CO2RR activity and the transported alkali metal cations in MEA electrolyzers. As a result, although the presence of transported alkali metal cations on the cathode surface significantly contributes to the generation of C2+ compounds, the rate of K+ ion transport did not match the selectivity of C2+, suggesting that a continuous supply of high amount of K+ to the cathode surface is not required for C2+ formation. Based on these findings, we achieved a faradaic efficiency (FE) and a partial current density for C2+ of 77 % and 230 mA cm-2, respectively, even after switching the anode solution from 0.1 M KHCO3 to a dilute K+ solution (<7 mM). These values were almost identical to those when 0.1 M KHCO3 was continuously supplied. Based on this insight, we successfully improved the durability of the system against salt precipitation by intermittently supplying concentrated KHCO3, compared with the continuous supply.

Trilayer Polymer Electrolytes Enable Carbon-Efficient CO2 to Multicarbon Product Conversion in Alkaline Electrolyzers.

The electrochemical CO2 reduction reaction (CO2RR) is an appealing method for carbon utilization. Alkaline CO2 electrolyzers exhibit high CO2RR activity, low full-cell voltages, and cost-effectiveness. However, the issue of CO2 loss caused by (bi)carbonate formation leads to excessive energy consumption, rendering the process economically impractical. In this study, we propose a trilayer polymer electrolyte (TPE) comprising a perforated anion exchange membrane (PAEM) and a bipolar membrane (BPM) to facilitate alkaline CO2RR. This TPE enables the coexistence of high alkalinity near the catalyst surface and the H+ flux at the interface between the PAEM and the cation exchange layer (CEL) of the BPM, conditions favoring both CO2 reduction to multicarbon products and (bi)carbonate removal in KOH-fed membrane electrode assembly (MEA) reactors. As a result, we achieve a Faradaic efficiency (FE) of approximately 46 % for C2H4, corresponding to a C2+ FE of 64 % at 260 mA cm-2, with a CO2-to-C2H4 single-pass conversion (SPC) of approximately 32 % at 140 mA cm-2-nearly 1.3 times the limiting SPC in conventional AEM-MEA electrolyzers. Furthermore, coupling CO2 reduction with formaldehyde oxidation reaction (FOR) in the TPE-MEA electrolyzer reduces the full-cell voltage to 2.3 V at 100 mA cm-2 without compromising the C2H4 FE.

Molecular Engineering of Porous Fe-N-C Catalyst with Sulfur Incorporation for Boosting CO2 Reduction and Zn-CO2 Battery.

Transition metal-nitrogen-carbon (M-N-C) catalysts have emerged as promising candidates for electrocatalytic CO2 reduction reaction (CO2RR) due to their uniform active sites and high atomic utilization rate. However, poor efficiency at low overpotentials and unclear reaction mechanisms limit the application of M-N-C catalysts. In this study, Fe-N-C catalysts are developed by incorporating S atoms onto ordered hierarchical porous carbon substrates with a molecular iron thiophenoporphyrin. The well-prepared FeSNC catalyst exhibits superior CO2RR activity and stability, attributes to an optimized electronic environment, and enhances the adsorption of reaction intermediates. It displays the highest CO selectivity of 94.0% at -0.58V (versus the reversible hydrogen electrode (RHE)) and achieves the highest partial current density of 13.64mA cm-2 at -0.88V. Furthermore, when employed as the cathode in a Zn-CO2 battery, FeSNC achieves a high-power density of 1.19mW cm-2 and stable charge-discharge cycles. Density functional theory calculations demonstrate that the incorporation of S atoms into the hierarchical porous carbon substrate led to the iron center becoming more electron-rich, consequently improving the adsorption of the crucial reaction intermediate *COOH. This study underscores the significance of hierarchical porous structures and heteroatom doping for advancing electrocatalytic CO2RR and energy storage technologies.

Trilayer Polymer Electrolytes Enable Carbon‐Efficient CO2 to Multicarbon Product Conversion in Alkaline Electrolyzers

AbstractThe electrochemical CO2 reduction reaction (CO2RR) is an appealing method for carbon utilization. Alkaline CO2 electrolyzers exhibit high CO2RR activity, low full‐cell voltages, and cost‐effectiveness. However, the issue of CO2 loss caused by (bi)carbonate formation leads to excessive energy consumption, rendering the process economically impractical. In this study, we propose a trilayer polymer electrolyte (TPE) comprising a perforated anion exchange membrane (PAEM) and a bipolar membrane (BPM) to facilitate alkaline CO2RR. This TPE enables the coexistence of high alkalinity near the catalyst surface and the H+ flux at the interface between the PAEM and the cation exchange layer (CEL) of the BPM, conditions favoring both CO2 reduction to multicarbon products and (bi)carbonate removal in KOH‐fed membrane electrode assembly (MEA) reactors. As a result, we achieve a Faradaic efficiency (FE) of approximately 46 % for C2H4, corresponding to a C2+ FE of 64 % at 260 mA cm−2, with a CO2‐to‐C2H4 single‐pass conversion (SPC) of approximately 32 % at 140 mA cm−2—nearly 1.3 times the limiting SPC in conventional AEM‐MEA electrolyzers. Furthermore, coupling CO2 reduction with formaldehyde oxidation reaction (FOR) in the TPE‐MEA electrolyzer reduces the full‐cell voltage to 2.3 V at 100 mA cm−2 without compromising the C2H4 FE.

Cobalt-Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO2 Reduction to Electrolyte-Free Formic Acid.

Electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO-) is a promising strategy for carbon neutrality. Enhancing CO2RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO2RR performance compared to pristine Bi, achieving ~90 % HCOO- selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm-2. In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm-2, generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO2, due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. This study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO2RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

Promises of MOF‐Based and MOF‐Derived Materials for Electrocatalytic CO2 Reduction

AbstractElectrocatalytic CO2 reduction (ECR) powered by renewable electricity is a promising technology to mitigate carbon emissions and lessen the dependence on fossil fuels toward a carbon‐neutral energy cycle. Metal–organic frameworks (MOFs) and their derivatives, due to their excellent intrinsic activity, have emerged as promising materials for the ECR to high‐demand products. However, challenges such as unsatisfactory energy efficiency, selectivity, and relatively low production rates hinder their industrial scalability. Here, a comprehensive and critical review is presented that summarizes the state‐of‐the‐art progress in MOF‐based and MOF‐derived CO2 electroreduction catalysts from design and functionality perspectives. The fundamentals of CO2 reduction reaction (CO2RR) over heterogeneous catalysts, reaction mechanisms, and key challenges faced by ECR are described first to establish a solid foundation for forthcoming in‐depth analyses. MOF's building blocks, properties, and shortcomings pertinent to ECR including low conductivity and stability, are systematically discussed. Moreover, comprehensive discussions are provided on MOF‐based and MOF‐derived catalysts design, fabrication, characterization, and CO2RR activity to pinpoint the intricate structure‐property‐performance relationship. Finally, promising recommendations are put forward for enhancing MOF electrocatalysts activity, selectivity, and durability. This work may serve as a guideline for developing high‐performance MOF‐related catalysts for CO2RR, benefiting researchers working in this growing and potentially game‐changing area.

Gas-phase electrochemical CO2 reduction on silver-copper BTC MOF in a zero-gap membrane electrode assembly

Bimetallic AgCu-BTC MOFs, derived from Cu-BTC (HKUST-1), have been synthesized by fast co-precipitation method and evaluated for CO2 reduction reaction (CO2RR) using humidified CO2 gas in a zero-gap configuration. Three compositions with varying Ag content – AgCu-1 (9.4 at.%), AgCu-2 (12.5 at.%), and AgCu-3 (16.5 at.%) – were characterized by SEM-EDS, PXRD, FTIR, and XPS. These structural analyzes confirmed the formation of a low-crystalline AgCu-BTC MOF with Ag+1 ions coordinated to the BTC framework. Electrochemical tests (CV and LSV) revealed that AgCu-3 MOF, with the highest Ag content (16.5 at.%), exhibited a more positive onset potential at -0.65 V vs Ag/AgCl compared to HKUST-1 MOF, indicating enhanced CO2RR activity, owing to Ag incorporation. Constant potential (CP) experiments showed that AgCu-3 MOF predominantly produced CO and H2, achieving faradaic efficiency of approximately 65 % for CO production and 5 % for H2 production. Moreover, lowering the relative humidity (RH%) in the inlet CO2 gas stream from 80% to 20% increased CO production by 2-fold from 6.2 µmol s-1 cm-2 to 13 µmol s-1 cm-2, simultaneously suppressing the hydrogen evolution reaction (HER). This reduction in humidity resulted in an increased local concentration of CO2 at the catalyst site, leading to an enhanced CO2RR rate. However, substantial morphological changes have been observed in the AgCu-3 MOF after the CP experiment under humid CO2 reduction conditions.

Electrolyte Composition-Dependent Product Selectivity in CO2 Reduction with a Porphyrinic Metal-Organic Framework Catalyst.

A copper porphyrin-derived metal-organic framework electrocatalyst, FICN-8, was synthesized and its catalytic activity for CO2 reduction reaction (CO2RR) was investigated. FICN-8 selectively catalyzed electrochemical reduction of CO2 to CO in anhydrous acetonitrile electrolyte. However, formic acid became the dominant CO2RR product with the addition of a proton source to the system. Mechanistic studies revealed the change of major reduction pathway upon proton source addition, while catalyst-bound hydride (*H) species was proposed as the key intermediate for formic acid production. This work highlights the importance of electrolyte composition on CO2RR product selectivity.

Understanding the Temperature Effect on Carbon‐Carbon Coupling during CO2 and CO Electroreduction in Zero‐Gap Electrolyzers†

Comprehensive SummaryCu‐catalyzed electrochemical CO2 reduction reaction (CO2RR) and CO reduction reaction (CORR) are of great interest due to their potential to produce carbon‐neutral and value‐added multicarbon (C2+) chemicals. In practice, CO2RR and CORR are typically operated at industrially relevant current densities, making the process exothermal. Although the increased operation temperature is known to affect the performance of CO2RR and CORR, the relationship between temperatures and kinetic parameters was not clearly elaborated, particularly in zero‐gap reactors. In this study, we detail the effect of the temperature on Cu‐catalyzed CO2RR and CORR. Our electrochemical and operando spectroscopic studies show that high temperatures increase the activity of CO2RR to CO and CORR to C2H4 by enhancing the mass transfer of CO2 and CO. As the rates of these two processes are highly influenced by reactant diffusion, elevating the operating temperature results in high local CO2 and CO availability to accelerate product formation. Consequently, the *CO coverage in both cases increases at higher temperatures. However, under CO2RR conditions, *CO desorption is more favorable than carbon‐carbon (C—C) coupling thermodynamically at high temperatures, causing the reduction in the Faradaic efficiency (FE) of C2H4. In CORR, the high‐temperature‐augmented CO diffusion overcomes the unfavorable adsorption thermodynamics, increasing the probability of C—C coupling.

Boosting the Electroreduction of CO2 to CO by Ligand Engineering of Gold Nanoclusters

AbstractThe electrochemical CO2 reduction reaction (CO2RR) has been widely studied as a promising means to convert anthropogenic CO2 into valuable chemicals and fuels. In this process, the alkali metal ions present in the electrolyte are known to significantly influence the CO2RR activity and selectivity. In this study, we report a strategy for preparing efficient electrocatalysts by introducing a cation‐relaying ligand, namely 6‐mercaptohexanoic acid (MHA), into atom‐precise Au25 nanoclusters (NCs). The CO2RR activity of the synthesized Au25(MHA)18 NCs was compared with that of Au25(HT)18 NCs (HT=1‐hexanethiolate). While both NCs selectively produced CO over H2, the CO2‐to‐CO conversion activity of the Au25(MHA)18 NCs was significantly higher than that of the Au25(HT)18 NCs when the catholyte pH was higher than the pKa of MHA, demonstrating the cation‐relaying effect of the anionic terminal group. Mechanistic investigations into the CO2RR occurring on the Au25 NCs in the presence of different catholyte cations and concentrations revealed that the CO2‐to‐CO conversion activities of these Au25 NCs increased in the order Li+&lt;Na+&lt;K+&lt;Cs+, and are gated by the cation‐coupled electron transfer step. These results were confirmed by the Nernstian shifts of the polarization curves at different cation concentrations.

Boosting the Electroreduction of CO2 to CO by Ligand Engineering of Gold Nanoclusters.

The electrochemical CO2 reduction reaction (CO2RR) has been widely studied as a promising means to convert anthropogenic CO2 into valuable chemicals and fuels. In this process, the alkali metal ions present in the electrolyte are known to significantly influence the CO2RR activity and selectivity. In this study, we report a strategy for preparing efficient electrocatalysts by introducing a cation-relaying ligand, namely 6-mercaptohexanoic acid (MHA), into atom-precise Au25 nanoclusters (NCs). The CO2RR activity of the synthesized Au25(MHA)18 NCs was compared with that of Au25(HT)18 NCs (HT=1-hexanethiolate). While both NCs selectively produced CO over H2, the CO2-to-CO conversion activity of the Au25(MHA)18 NCs was significantly higher than that of the Au25(HT)18 NCs when the catholyte pH was higher than the pKa of MHA, demonstrating the cation-relaying effect of the anionic terminal group. Mechanistic investigations into the CO2RR occurring on the Au25 NCs in the presence of different catholyte cations and concentrations revealed that the CO2-to-CO conversion activities of these Au25 NCs increased in the order Li+<Na+<K+<Cs+, and are gated by the cation-coupled electron transfer step. These results were confirmed by the Nernstian shifts of the polarization curves at different cation concentrations.

Covalent organic framework with bioinspired N,S-anchored single atom sites for photocatalytic CO2 reduction reaction

Photocatalytic CO2 reduction reaction (CO2RR) has promising potential to address global energy and environmental challenges but is severely limited by sluggish kinetics and poor selectivity, where the chemical microenvironments and electronic structures of the catalytic center play pivotal roles. Herein, inspired by carbon monoxide dehydrogenase, which can accelerate CO2 to CO reduction, we delicately design a covalent organic framework (THD-COF) with bioinspired N,S-coordination sites from thiophene and imine modules on the skeleton and construct Co-THD-COF by anchoring single Co atoms on the N,S-sites. Under visible light, employing binary mixed sacrificial agents, with the help of photosensitizer [Ru(bpy)3]Cl2·6H2O, Co-THD-COF displays dramatically enhanced photocatalytic CO2RR activity, exhibiting an astounding CO generating rate of 9357 μmol g−1h−1 with the selectivity of 95.1 %. Additionally, Co-THD-COF can photocatalyze CO2 conversion smoothly in real seawater without loss of CO selectivity. Experimental and computational analysis further manifest that the single Co atom is the catalytic active center. Co-THD-COF significantly promotes CO2 adsorption and activation, charge separation dynamics, and is also beneficial to the formation of the crucial *COOH intermediates. The current study offers deep insights into the effective conversion of CO2 and enlightens the design of novel bioinspired coordination sites for single-atom photocatalysts.

Internal electric field-modulated dual S-scheme ZnO@Co3O4/CsPbBr3 nanocages for highly active and selective photocatalytic CO2 reduction

The rational design of a step-scheme (S-scheme) heterojunction with strong internal electric field (IEF) and high redox capacity is a promising strategy for photocatalytic CO2 reduction reaction (CO2RR). However, the precise process of charge transport on the multi-interfaces remains a great challenge. Herein, a dual S-scheme heterojunction constructed in the ZnO@Co3O4/CsPbBr3 hierarchical nanocage was prepared for enhancing CO2RR activity. Without sacrificial agent and photosensitizer, the optimal photocatalyst exhibits a competitive CH4 yield rate of 238.8 μmol g−1h−1 with high selectivity (90.9%), affording an apparent quantum efficiency of 4.6 % at 400 nm, outperforming most previously comparable photocatalysts. In situ X-ray photoelectron spectroscopy (in situ XPS), photoelectrochemical measurement and theoretical calculation verifies the dual S-schematic charge-transport pathway. The remarkably improved performance in CO2RR is due to the rapid charge separation through O-Co-Br bridge driven by the strong internal electric field. This research furnishes a new insight to reveal dynamic charge transfer mechanism for CO2 conversion applications.

Coordination-based synthesis of Fe single-atom anchored nitrogen-doped carbon nanofibrous membrane for CO2 electroreduction with nearly 100 % CO selectivity

Carbon-based materials with single-atom (SA) transition metals coordinated with nitrogen (M-Nx) have attracted extensive attention due to their superior electrochemical CO2 reduction reaction (CO2RR) performance. However, the uncontrolled recombination of metal atoms during the typical high-temperature synthesis process in M-Nx causes deterioration of CO2RR activity. Herein, by using electrospinning, we propose a novel strategy for constructing a highly active and selective SA Fe-modified N-doped porous carbon fiber membrane catalyst (Fe-N-CF). This carbon membrane has an interconnected three-dimensional structure and a hierarchical porous structure, which can not only confine Fe to be single atom as active centers, but also provide a diffusion channel for CO2 molecules. Relying on its special structure and stable mechanical properties, Fe-N-CF is directly used for CO2RR, which presents an excellent selectivity (CO Faradaic efficiency of 97 %) and stability. DFT calculations reveals that the synthesized Fe-N4-C can significantly reduce the energy barrier for intermediate COOH* formation and CO desorption. This work highlights the specific advantages of using electrospinning method to prepare the optimal SA catalysts.