CO2 H2O Inclusions Research Articles

Nature, origin, and evolution of carbon-rich fluids in orogenic gold deposits: Insights from fluid inclusion and C-H-O isotope studies of the Tokuzbay gold deposit, Chinese Altai

Carbon-rich or carbonic fluids are identified in some orogenic-type gold deposits worldwide. Their nature, origin, evolution, and relations with gold mineralization are still poorly understood. The Tokuzbay large-size orogenic-type gold deposit in Chinese Altai is characterized by enormous CO2-rich fluid inclusions (FIs), providing an ideal case to investigate the genetic relationship between carbon-rich hydrothermal systems and orogenic-type gold mineralization. The mineralization process in the Tokuzbay includes four stages: (1) stage I quartz-magnetite veins; (2) stage II quartz-pyrite veins; (3) stage III quartz-polymetallic sulfide veins; and (4) stage IV quartz-carbonate veins. Based on the microscopic investigation, cathodoluminescence (CL) imaging, Raman spectrum analysis, and mircothermometric measurements, three types of FIs are identified in the veins, including the N2-bearing carbonic or CO2-rich inclusions (PC-type), the CO2-H2O inclusions (C-type), and the H2O-dominated or aqueous inclusions (W-type). The FIs in the stage I minerals are dominated by PC- and C-types, with minor amount of W-type, and occur as primary and pseudosecondary within quartz grains. These inclusions show a salinity of 5.0—9.5 wt% NaCl eqv. and homogenize to liquid phase during 272℃ to 399℃, indicating their entrapment from an initially homogeneous carbon-rich CO2-H2O-NaCl metamorphic fluid system. From early to late stages, the PC- and C-type FIs are getting infertile, while the W-type FIs become more abundant, indicating the escapes of CO2 and compositional transition from CO2-rich to H2O-rich system. Moreover, the decreasing in temperature (272–399 ℃, 238—326 ℃, 173—267 ℃ and 135—182 ℃ from stages I to IV, respectively) and salinity (5.0—9.5, 2.6—9.2, 2.3—7.8 and 1.4—4.3 wt% NaCl eqv. from stages I to IV, respectively), together with the decrease of the δ18O values, suggests an input of meteoric water during mineralization. In the main mineralization stages (II and III), some FIs show divergent homogenization direction (liquid vs vapor) at similar homogeneous temperatures, yielding quite different salinities. For example, the coexisting W-type and C-type FIs yield similar homogenization temperatures, and the liquid-rich and vapor-rich FIs divergently homogenize to liquid and vapor at similar temperatures with different salinities. This indicates that the fluid effervescence drove phase separation and caused the CO2 escape from the fluid system which promoted the gold precipitation at the ductile-to-brittle transition zone that revealed by the depth (8—11 km) calculated by the C-type FIs of the immiscible inclusion assemblages.The δ13C values of the CO2 extracted from fluid inclusions range from –7.6 to –22.8‰, suggesting that the CO2 might be derived from the hydrolysis of organic matter in the source sediments during metamorphism, rather than simply sourced from magma or the mantle. This understanding is supported by the widespread observation of the low δ13C values from most of orogenic-type gold deposits hosted in sedimentary rocks worldwide.

Ore Mineralogy, Fluid Inclusion Geochemistry, and Zircon U-Pb Geochronology of the Nanmingshui Gold Deposit in East Junggar, Xinjiang, Northwest China: Implications for Ore Genesis

The Nanmingshui gold deposit, located in the eastern segment of the Kalamaili gold belt (KGB), is hosted by the sub-greenschist facies rocks of the Lower Carboniferous Jiangbasitao Formation. The genesis of this deposit, however, has been debated for decades because of controversial constraints on the P-T-X conditions and origins of hydrothermal fluid and mineralization age. In this study, we present gold-bearing sulfide compositions, fluid inclusions, H-O isotopes, and the results of hydrothermal zircon U-Pb dating to provide new insights into the genesis of the gold deposit. Three gold mineralization stages are recognized: quartz–pyrite–minor native gold veins (early), quartz–tourmaline–arsenopyrite–pyrite–gold–polymetallic sulfide veins (middle), and quartz–calcite veinlets (late). Gold predominantly occurs as native gold with high fineness ranging from 941 to 944 in sulfides and quartz, and some as solid solutions (Au+) within the lattice of pyrite and arsenopyrite. Three types of primary fluid inclusions are identified in hydrothermal quartz: CO2-H2O (C-type), aqueous (W-type), and pure CO2 (PC-type) inclusions. The early-stage quartz mainly contains C-type and minor W-type inclusions, with total homogenization temperatures (Th) of 220–339 °C, salinities of 0.4–3.7 wt.% NaCl eqv., and bulk densities of 0.66–1.01 g/cm3. All three types of inclusions are observed in the middle-stage quartz, of which the C- and W-type inclusions yield Th values of 190–361 °C, with salinities of 0.4–6.0 wt.% NaCl eqv. and bulk densities of 0.69–0.99 g/cm3. The late-stage quartz contains only W-type inclusions that have lower Th values of 172–287 °C, higher salinities of 1.4–6.9 wt.% NaCl eqv., and bulk densities of 0.79–0.95 g/cm3. Trapping pressures estimated from C-type inclusions in the early and middle stages cluster at 280–340 MPa and 220–310 MPa, respectively, corresponding to metallogenic depths of 10–13 km and 8–11 km. The H-O isotopic compositions (δ18Owater = 1.8–10.9‰, δD = −99 to −62.9‰) and microthermometric data indicate that the ore-forming fluids belong to medium–high-temperature, low-salinity, medium-density, and CO2-rich-H2O-NaCl ± CH4 ± N2 systems, probably originating from metamorphic water. Fluid immiscibility is a crucial mechanism for gold precipitation. Additionally, the U-Pb dating of hydrothermal zircons, from the auriferous quartz–tourmaline vein, yield a weighted mean 206Pb/238U age of 314.6 ± 9.6 Ma. Taking all of the above, the Nanmingshui deposit can be reasonably classed as a typical mesozonal orogenic gold deposit in the KGB, which was formed in a Late Carboniferous tectonic transition from syn-collision between the Jiangjunmiao accretionary complex and Yemaquan arc to post-collision in the East Junggar Orogen. Our results serve to better understand the gold mineralization and genesis of the Late Paleozoic orogenic system in the Kalamaili area, Xinjiang.

Fluid mineralization of the Dongtongyu gold deposit in the southern margin of North China craton: Evidence from microthermometry and composition of fluid inclusions

In this study, petrographic, microthermometric, and synchrotron radiation X-ray fluorescence (SRXRF) analyses of fluid inclusions were conducted to shed light on the mineralization mechanism of the Dongtongyu deposit and provide some evidence of the relationship among CO2, Au, and other ore elements (e.g., Cu, Fe, Zn, and Pb) in ore-forming fluids. The ore-forming fluid is characterized as the H2O–CO2–NaCl system with medium–high temperatures and low salinities. Four structural mineralization stages are distinguished: Pyrite-quartz (Stage 1), gold-quartz-pyrite (Stage 2), gold-quartz-polymetallic sulfide (Stage 3), and quartz-calcite (Stage 4). Fluid inclusions in Stages 1–3 are dominated by the H2O–CO2 type, and most of them contain liquid H2O and liquid CO2 at room temperature. The melting temperatures (Tm-CO2 = −82.1°C to −57.5°C) of solid CO2 in Stage 1 are relatively low. The values of Tm-CO2 in Stages 2–3 are quite close, with ranges of −60.5°C to −56.5°C and −59.2°C to −58.6°C, respectively. The melting temperatures of clathrate in Stages 1–3 are −2.7°C to +7.8°C, −5.5°C to +7.8°C, and +3.7°C to +7.2°C. The homogenization temperatures of the CO2 phase in the H2O–CO2 inclusions of the three stages are measured as −7.5°C to +31.7°C, −7.5°C to +29.3°C, and 7.1°C to +24.1°C. The total homogenization temperatures in Stages 1–3 are 180°C–394°C, 202°C–305°C, and 224°C–271°C, with salinities of 4.3 wt.%–18.2 wt% NaCl, 4.3 wt.%–20.0 wt% NaCl, and 5.3 wt.%–11.0 wt% NaCl, respectively. The laser Raman spectroscopy results show that the CO2–H2O inclusions in the quartz veins contain abundant CO2 and CH4. The SRXFR results show that most of the elements, especially As, Te, and Cu, are more enriched in liquid CO2 than in liquid H2O. The elements of Au, Fe, Ni, Cu, and Pb have higher concentrations in H2O–CO2-type fluid inclusions in Stage 2 than other fluid inclusions in Stages 1–2, suggesting that gold mineralization is closely related to CO2-rich fluids. During the fluid evolution process, fluid immiscibility is an important mineralization mechanism of gold. The increase in CO2 and CH4 and the decrease in the fluid temperature might promote fluid immiscibility.

Fluid Inclusions and Stable Isotope Geochemistry of Gold Mineralization Associated with Fine-Grained Granite: A Case Study of the Xiawolong Gold Deposit, Jiaodong Peninsula, China

The Xiawolong gold deposit, located in the Muping–Rushan gold metallogenic belt (eastern Jiaodong Peninsula), is a newly discovered deposit that developed in the late Early Cretaceous as fine-grained granite. Gold mineralization, which mainly occurs in the middle of fresh fine-grained granite dikes, consists of stockwork-style and disseminated ores. They are characterized by middle-high-temperature mineral assemblages, such as molybdenite and magnetite, associated with gold-bearing pyrite. Four types of primary fluid inclusions, contained within the quartz grains from the gold-bearing disseminated and stockwork-style fine-grained granitic ores, were identified based on microthermometry and Raman spectroscopy. The types identified were type 1 aqueous inclusions with middle-high temperature (201 to 480 °C) and middle-low salinity of 0.18 to 17.00 wt.% NaCl equiv.; type 2 H2O–CO2 inclusions, which show middle-high temperatures (218 to 385 °C), middle-low salinities (1.23 to 13.26 wt.% equiv. NaCl), and variable XCO2 (0.031 to 0.044); type 3 daughter mineral-bearing inclusions with high temperature (416 to 446 °C) and relatively constant and high salinity (28.59 to 32.87 wt.% NaCl equiv.); and type 4 CO2 fluid inclusions, which possess a bulk density of 0.405 to 0.758 g/cm3 and a constant XCO2 (0.952 to 0.990) (according to the decreasing abundance of fluid inclusions). The δ18Owater range is between 3.4 and 5.9‰, and the range of the δD is from −97.1 to −77.4‰, which indicates that the ore-forming process is of a magmatic water origin. The δ34S values possess a narrow range between 4.5 and 9.3‰, indicating the source of the Mesozoic Kunyushan granitoids. The Pb isotopic compositions of pyrite show that the Mesozoic Kunyushan granitoids are the main lead source for pyrites. Types 1, 2, and 3 fluid inclusions coexist in the same view field of the quartz grain, which are suggested to occur as the result of fluid immiscibility because of the boiling of a single homogeneous NaCl-CaCl2-KCl-CO2-H2O system. The fluid immiscibility, rather the fluid mixing and wall-rock sulfidation, is the mechanism of gold precipitation in the Xiawolong deposit. Compared with both the “Linglong-type” and “Jiaojia-type” gold deposits in the Jiaodong Peninsula in terms of geological–petrographic evidence and all of the available geochemical data, it can be concluded the Xiawolong gold deposit is of magmatic hydrothermal origin, having a genetic relation to the fine-grained granite.

Fluid Evolution and Ore Genesis of the Juyuan Tungsten Deposit, Beishan, NW China

The newly discovered Juyuan tungsten deposit is hosted in Triassic granite in the Beishan Orogen, NW China. The tungsten mineralization occurred as quartz veins, and the main ore minerals included wolframite and scheelite. The age, origin, and tectonic setting of the Juyuan tungsten deposit, however, remain poorly understood. According to the mineralogical assemblages and crosscutting relationships, three hydrothermal stages can be identified, i.e., the early stage of quartz veins with scheelite and wolframite, the intermediate stage of quartz veinlets with sulfides, and the late stage of carbonate-quartz veinlets with tungsten being mainly introduced in the early stage. Quartz formed in the two earlier stages contained four compositional types of fluid inclusions, i.e., pure CO2, CO2-H2O, daughter mineral-bearing, and NaCl-H2O, but the late-stage quartz only contained the NaCl-H2O inclusions. The inclusions in quartz formed in the early, intermediate, and late stages had total homogenization temperatures of 230–344 °C, 241−295 °C, and 184−234 °C, respectively, with salinities no higher than 7.2 wt.% NaCl equiv (equivalent). Trapping pressures estimated from the CO2-H2O inclusions were 33−256 MPa and 36−214 MPa in the early and intermediate stages, corresponding to mineralization depths of 3–8 km. Fluid boiling and mixing caused rapid precipitation of wolframite, scheelite, and sulfides. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO2-rich to CO2-poor in composition and from magmatic to meteoric, as indicated by decreasing δ18Owater values from early to late stages. The sulfur and lead isotope compositions in the intermediate-stage suggest that the Triassic granite was a significant source of ore metals. The biotite 40Ar/39Ar age from the W-bearing quartz shows that the Juyuan tungsten system was formed at 240.0 ± 1.0 Ma, coeval with the emplacement of granitic rocks at the deposit. Integrating the data obtained from the studies including regional geology, ore geology, biotite Ar-Ar geochronology, fluid inclusion, and C-H-O-S-Pb isotope geochemistry, we conclude that the Juyuan tungsten deposit was a quartz-vein type system that originated from the emplacement of the granites, which was induced by collision between the Tarim and Kazakhstan–Ili plates. A comparison of the characteristics of tungsten mineralization in East Tianshan and Beishan suggests that the Triassic tungsten metallogenic belt in East Tianshan extends to the Beishan orogenic belt and that the west of the orogenic belt also has potential for the discovery of further quartz-vein-type tungsten deposits.

Evolution of pegmatite ore-forming fluid: The Lijiagou spodumene pegmatites in the Songpan-Garze Fold Belt, southwestern Sichuan province, China

The late to post-tectonic Lijiagou spodumene pegmatites are located in the Ke’eryin orefield, which lies in the Triassic central Songpan-Garze Fold Belt (SGFB) in southwestern Sichuan Province, China. Fluid inclusion petrography, microthermometry and Raman spectroscopic analyses were carried out on quartz and spodumene in granites and four types of pegmatite in the Ke’eryin orefield. A Hydrothermal Diamond Anvil Cell (HDAC) was used to observe the microthermometric behavior of crystal-rich inclusions. Five types of fluid inclusions were identified. Crystal-rich inclusions (Type 1) in spodumene pegmatites were trapped at high temperature (658 to 741 °C) and high pressure (>4.7 kbar). Other inclusion types were found in granite and all types of pegmatite. Triphase CO2-H2O (CO2 + V + L, Type 2) inclusions show medium homogenization temperatures (324 to 339 °C), medium trapping pressures (2.09 to 2.54 kbar) and low to moderate salinities (3.1 to 11.3 wt% NaCl equiv). Biphase aqueous inclusions (L + V, Type 3) show similar homogenization temperatures (319 to 347 °C), and low to moderate salinities (5.5 to 18.0 wt% NaCl equiv). Monophase liquid CO2 (Type 4) inclusions have very low homogenization temperatures (15.4 to 19.1 °C). Monophase liquid H2O (Type 5) inclusions have moderate ice melting temperatures (–18.6 to –9.8 °C), and moderate salinities (18.4 to 18.5 wt% NaCl equiv). The various types of fluid inclusion reveal the P–T conditions of pegmatite formation, which records the transition from a magmatic to a hydrothermal environment and indicate that the ore-forming fluid resulted from the unmixing of magmatic melt. Fluid immiscibility is the key mechanism responsible for formation of the Lijiagou spodumene pegmatites and lithium mineral precipitation occurred from a high to medium temperature CO2-rich fluid. The absence of temperature and salinity gradients between granite and progressively more distal and evolved pegmatite compositions is inconsistent with formation of pegmatite magmas by fractional crystallization of granitic magmas, but consistent with separate anatectic origins of each type of pegmatite magma.

Genesis of the Nailenggele Mo-Cu-Pb-Zn polymetallic orefield in the Boluokenu Metallogenic Belt, Western Tianshan, China: Constraints from geochronology, fluid inclusions and isotope geochemistry

The Nailenggele orefield, located in the northwestern Chinese Tianshan Orogenic Belt, is composed of the Lailisigao’er Mo deposit, No. 3571 Cu prospect and Qixing Pb-Zn deposit. Lailisigao’er is a typical porphyry deposit with characteristic veinlet-disseminated ores and potassic, phyllic and propylitic alterations. No. 3571, situated in the peripheral of Lailisigao’er, is characterized by large amounts of oxidized ores at surface with limited intrusions outcropped. Qixing, about 3 km from Lailisigao’er, is characterized by quartz-sulfide veins controlled by fractures. This study aims to examine the genetic relationships between these deposits and/or occurrences, and discuss the significance for further exploration in the orefield and elsewhere in the region. LA-ICP-MS U-Pb dating on zircons from the ore-bearing porphyry in the Lailisigao’er deposit yielded an age of 367.5 ± 4.8 Ma. The molybdenite Re-Os and sphalerite Rb-Sr isochron ages recalculated from previously published data are 365.9 ± 2.1 Ma for Lailisigao’er and 362.0 ± 5.7 Ma for Qixing, respectively, suggesting that they are coeval and both related to the granodiorite porphyries. Three types of fluid inclusions occur in the Mo-bearing quartz from Lailisigao’er, including two-phase aqueous inclusions (Type I), solid mineral-bearing aqueous inclusions (Type II) and CO2-H2O inclusions (Type III). The total homogenization (Th) temperatures cluster from 260 to 320 °C (to liquid) for type I inclusions, 310 to 332 °C (to liquid) for type II inclusions, and 268 to 324 °C (to CO2 phase) for type III inclusions. The salinities are mainly in the ranges of 2.0–8.0, 32.9–42.0, and 1.4–5.5 wt% NaCleq for types I, II and III inclusions, respectively. By contrast, only type I inclusions were identified in the Pb-Zn-bearing quartz from Qixing, with Th values of 149–261 °C and salinities of 1.7–5.3 wt% NaCleq. The δ34SCDT values of hydrothermal sulfides from Lailisigao’er, No. 3571 and Qixing range from 2.8‰ to 4.0‰, 4.0‰ to 4.6‰ and 0.7‰ to 4.9‰, respectively. Sulfides from these three locations have uniform Pb isotopic compositions. The (87Sr/86Sr)0 ratios of fluid inclusions (average 0.70971) in Mo-bearing quartz at Lailisigao’er and sphalerite (average 0.71020) at Qixing are similar to those of Mo-mineralized porphyries (average of 0.70886) from Lailisigao’er. The δ18OH2O and δDH2O values of Pb-Zn-bearing quartz from Qixing are similar to those of Mo-bearing quartz from Lailisigao’er, both plotting close to the field of magmatic water but shifted toward the meteoric line. These geochronological, fluid inclusions and isotopic data suggest that the mineralization at different localities in the Nailenggele orefield constitutes part of an integrated magmatic-hydrothermal system centered on the Lailisigao’er porphyry Mo deposit, with the Qixing Pb-Zn polymetallic deposit representing a distal end-member. Both metals and sulfur were dominantly derived from porphyritic intrusions, whereas the ore-forming fluids were initially derived from the magmatic intrusions, with increasing involvement of meteoric water in time and distance from magmatic-hydrothermal center. Fluid immiscibility in the early stage and fluid mixing in the later stage, together with cooling, were responsible for ore precipitation. Based on this mineralization model, it is inferred that concealed porphyry Cu-Mo mineralization may be developed underneath the No. 3571 and Qixing.

New constraints on the genesis and geodynamic setting of the Wulong gold deposit, Liaodong Peninsula, northeast China: evidence from geology, geochemistry, fluid inclusions, and C–H–O–S–Pb isotopes

The Wulong lode gold deposit is located in the Liaoning Province, northeast part of North China Craton. Gold ore bodies are mainly hosted in the Late Jurassic granite and structurally controlled by northeast-trending faults. Gold occurs in disseminated and auriferous quartz–sulfide veins and veinlets within hydrothermally altered rocks. Mineralization can be divided into three stages: (1) quartz–pyrite stage, (2) quartz–polymetallic sulfides stage, and (3) quartz–carbonate stage. Gold formed mainly in the middle stage. Quartz formed in the two earlier stages contains three compositional types of fluid inclusions, i.e., pure CO2, CO2–H2O and NaCl–H2O, but the late-stage minerals only contain NaCl–H2O inclusions. The inclusions in quartz formed in the early, main, and late stages yield total homogenization temperatures of 317–383 °C, 260–380 °C and 159–234 °C, respectively, with salinities of 5.14–9.44, 2.95–6.20, 1.23–4.34 wt% NaCl equivalent, respectively. Trapping pressures estimated from CO2–H2O inclusions are 200–390 MPa in the main stage. Fluid boiling and immiscibility caused rapid precipitation of sulfides and gold. Through immiscibility and inflow of meteoric water, the ore-forming fluid system evolved from CO2-rich to CO2-poor in composition, and from magmatic to meteoric, as indicated by δ18Owater values (4.5‰–7.3‰). The carbon (−12.2‰ to −11.5‰), sulfur (0.9‰–2.6‰), and lead isotope (207Pb/204Pb of 15.606–15.618) compositions suggest the host rocks to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, fluid inclusion, and C–H–O–S–Pb isotope geochemistry, we conclude that the Wulong deposit is a decratonization gold deposit formed during lithospheric thinning associated with destruction of the North China Craton triggered by the subduction of the Paleo-Pacific Oceanic plate in the Early Cretaceous.

Nature and ore formation of the Erdaohezi Pb-Zn deposit in the Great Xing’an Range, NE China

The Erguna metallogenic belt is a large Erdaohezi epithermal polymetallic sulfide Pb-Zn deposit in the northern Great Xing’an Range that is associated with andesitic porphyry. Mineralization mainly occurs at the edges of andesitic porphyry and adjacent Jurassic quartz porphyry and volcanic strata. Hydrothermal alteration minerals mainly include quartz, sericite, adularia, chlorite and calcite, while ore minerals include pyrite, galena and sphalerite, with minor argentite, chalcopyrite and tetrahedrite. Three hydrothermal-mineralization stages are recognized. Three categories of fluid inclusions (FIs) are distinguished in quartz, fluorite and sphalerite veins: liquid-rich, gas-rich and a few H2O–CO2 inclusions. The stage I FIs include all three inclusion types and present high homogenization temperatures (197–233℃) and salinities (0.7–6.8 wt% NaCl eq.). The stage II FIs mainly comprise liquid-rich inclusions with a few H2O–CO2 types and present higher homogenization temperatures (167–190℃) and slightly higher salinities (0.9–7.6 wt% NaCl eq.) than those of stage I. Stage III only contains liquid-rich inclusions and presents the lowest homogenization temperatures (120–157℃) and salinities (0.5–4.8 wt% NaCl eq.). The ore-forming fluids have low temperatures and salinities in an H2O–NaCl–CO2 ± CH4 system. The O–H isotope data (-2.2 to −5.0‰ and −160.0 to −152.5‰, respectively) suggest that ore-forming fluids gradually evolved from mantle primarywater to meteoric water. Sulfur, strontium and lead isotopes imply a mixed crustal and mantle source for the ore-forming materials. Sulfide Rb–Sr dating yields a well-defined isochron age of 130.5 ± 3.6 Ma from the main mineralization stage, which is similar to the zircon age of 134.9 ± 0.9 Ma for the andesitic porphyry related to mineralization. We therefore proposed that Erdaohezi is a low-sulfidation epithermal Pb-Zn polymetallic deposit, and fluid immiscibility was the dominant mechanism of ore deposition. Mineralization occurred in an Early Cretaceous back-arc extensional setting that was related to the subduction of the Paleo-Pacific Plate.

Genesis of the Jinchanggouliang gold deposit, Chifeng, China: Constraints from fluid inclusions and isotopic geochemistry

The Jinchanggouliang gold deposit which located south of the Hingan-Mongolian Orogenic Belt is a large gold deposit in the Chifeng-Chaoyang region. Field evidence and petrographic observations indicate that the mineralization processes can be divided into three stages: including milky or grey quartz (stage I), quartz-pyrite (stage II), quartz-polymetallic sulfides (stage III). Five types of FIs have been identified in the Jinchanggouliang deposit: (1) solid-bearing inclusions (type 1), liquid-rich inclusions (type 2); vapor-rich inclusions (type 3); pure vapor inclusions (type 4) and CO2–H2O inclusions (type 5). The first stage contains mainly type 2, but also minor type 3 and 4 FIs; the FIs display homogenization temperatures of 317–384 °C and salinities of 4.0–12.5 wt% NaCl eq. The stage II contains all types of FIs (mainly type 2, less abundant type 3 and 5, rarely type 1 and 4) which show homogenization temperatures of 288–382 °C and salinities of 1.6–41.4 wt% NaCl eq. The types of FIs in stage III are the same as stage II; These FIs yield the lowest homogenization temperatures of 245–363 °C and salinities of 1.1–36.8 wt% NaCl eq. The ore-forming fluids are characterized by moderate-high temperature and great fluctuating salinity magmatic hydrothermal fluids. The type 2 and 3 FIs commonly coexist with simultaneously trapped type 5 FIs, and the type 2 and 3 FIs have similar homogenization temperatures but contrasting homogenization modes (to the liquid and vapor, respectively) in the main mineralization stages which suggests fluid boiling occurred in these two stages. Combined with the previous H-O isotopic data it can be concluded that the ore-forming fluids are of granitic magmatic origin. The S-Pb isotopes indicate that the ore materials were mainly derived from deep magma. Petrographic observations and microthermometric analysis indicating that fluid boiling was the main mineral precipitation mechanism, and fluid boiling mainly occurred in the temperature range from 290 °C to 370 °C. In general, from the view of fluid inclusions and isotopes geochemistry, the Jinchanggouliang gold deposit is most probably a magmatic hydrothermal deposit.

Genesis of the Dachang Sn-polymetallic and Baoshan Cu ore deposits, and formation of a Cretaceous Sn-Cu ore belt from southwest China to western Myanmar

Large scale Cretaceous magmatism and SnCu mineralization occurred in an E-W-trending ore belt from southwest China to western Myanmar. We investigated the genesis of the world-class Dachang Sn-polymetallic and newly discovered Baoshan Cu deposit in Guangxi Province, southwest China, and the tectonic setting of this belt. The Dachang ore field contains a giant vein ore body (No. 100) and stratiform ore bodies (No. 91 and 92). The cassiterite U-Pb age (92.5 ± 4.4 Ma) of the No. 100 ore body is similar to the zircon U-Pb age of the Longxianggai biotite granite (90.8 ± 1.0 Ma), suggesting the vein ore body was related to Cretaceous magmatism. The fluid inclusions in the No. 92 ore body are similar to those in the No. 100 ore body, and contain CO2-H2O, liquid-rich and halite-bearing fluid inclusions, with homogenization temperatures of 300–410 °C. These data further suggest that mineralization was related to Cretaceous magmatism. The mineralization in the Baoshan Cu deposit occurs as veins in the Baoshan porphyry and adjacent country rocks. The Baoshan porphyry yielded a zircon U-Pb age of 90.6 ± 1.3 Ma, EuN/Eu* = 0.05, CeN/Ce* = 12.2 and εHf(t) = −11.39 to −7.37. These data indicate that the porphyry magma was reduced and crustally derived. Low Sr/Y ratios (<0.1) and large negative Eu anomalies (EuN/Eu* = 0.03–0.06), along with rare earth element tetrad effects further imply the porphyry magma was highly fractionated. The Baoshan porphyry was genetically associated with Cu mineralization, but is distinct from the typical Cu-mineralizing porphyry magmas.This Cretaceous Sn-Cu ore belt was likely related to subduction and roll-back of the Neo-Tethys Plate rather than northwestward subduction of the Paleo-Pacific Plate.

Genesis of the Koka Gold Deposit in Northwest Eritrea, NE Africa: Constraints from Fluid Inclusions and C–H–O–S Isotopes

The Koka gold deposit is located in the Elababu shear zone between the Nakfa terrane and the Adobha Abiy terrane, NW Eritrea. Based on a paragenetic study, two main stages of gold mineralization were identified in the Koka gold deposit: (1) an early stage of pyrite–chalcopyrite–sphalerite–galena–gold–quartz vein; and (2) a second stage of pyrite–quartz veins. NaCl-aqueous inclusions, CO2-rich inclusions, and three-phase CO2–H2O inclusions occur in the quartz veins at Koka. The ore-bearing quartz veins formed at 268 °C from NaCl–CO2–H2O(–CH4) fluids averaging 5 wt% NaCl eq. The ore-forming mechanisms include fluid immiscibility during stage I, and mixing with meteoric water during stage II. Oxygen, hydrogen, and carbon isotopes suggest that the ore-forming fluids originated as mixtures of metamorphic water and magmatic water, whereas the sulfur isotope suggests an igneous origin. The features of geology and ore-forming fluid at the Koka deposit are similar to those of orogenic gold deposits, suggesting that the Koka deposit might be an orogenic gold deposit related to granite.

Ore-Fluid Evolution of the Sizhuang Orogenic Gold Deposit, Jiaodong Peninsula, China

The Sizhuang gold deposit with a proven gold resource of &gt;120 t, located in northwest Jiaodong Peninsula in China, lies in the southern part of the Jiaojia gold belt. Gold mineralization can be divided into altered rock type, auriferous quartz vein type, and sulfide-quartz veinlet in K-feldspar altered granite. According to mineral paragenesis and mineral crosscutting relationships, three stages of metal mineralization can be identified: early stage, main stage, and late stage. Gold mainly occurs in the main stage. The petrography and microthermometry of fluid inclusion shows three types of inclusions (type 1 H2O–CO2 inclusions, type 2 aqueous inclusions, and type 3 CO2 inclusions). Early stage quartz-hosted inclusions have a trapped temperatures range 303–390 °C. The gold-rich main stage contains a fluid-inclusion cluster with both type 1 and 2 inclusions (trapped between 279 and 298 °C), and a wide range of homogenization temperatures of CO2 occurs to the vapor phase (17.6 to 30.5 °C). The late stage calcite only contains type 1 inclusions with homogenization temperatures between 195 and 289 °C. With evidences from the H–O isotope data and the study of water–rock interaction, the metamorphic water of the Jiaodong Group is considered to be the dominating source for the ore-forming fluid. The ore-fluid belonged to a CO2–H2O–NaCl system with medium-low temperature (160–360 °C), medium-low salinity (3.00–11.83 wt% NaCl eq.), and low density (1.51–1.02 g/cm3). Fluid immiscibility caused by pressure fluctuation is the key mechanism in inducing gold mineralization in the Sizhuang gold deposit.

Origin and Evolution of Ore-Forming Fluid and Gold-Deposition Processes at the Sanshandao Gold Deposit, Jiaodong Peninsula, Eastern China

The Early Cretaceous Sanshandao gold deposit, the largest deposit in the Sanshandao-Cangshang goldfield, is located in the northwestern part of the Jiaodong peninsula. It is host to Mesozoic granitoids and is controlled by the north by northeast (NNE) to northeast (NE)-trending Sanshandao-Cangshang fault. Two gold mineralizations were identified in the deposit’s disseminated and stockwork veinlets and quartz–sulfide veins, which are typically enveloped by broad alteration selvages. Based on the cross-cutting relationships and mineralogical and textural characteristics, four stages have been identified for both styles of mineralization: Pyrite–quartz (stage 1), quartz–pyrite (stage 2), quartz–pyrite–base metal–sulfide (stage 3), and quartz–carbonate (stage 4), with gold mainly occurring in stages 2 and 3. Three types of fluid inclusion have been distinguished on the basis of fluid-inclusion assemblages in quartz and calcite from the four stages: Pure CO2 gas (type I), CO2–H2O inclusions (type II), and aqueous inclusions (type III). Early-stage (stage 1) quartz primary inclusions are only type II inclusions, with trapping at 280–400 °C and salinity at 0.35 wt %–10.4 wt % NaCl equivalent. The main mineralizing stages (stages 2 and 3) typically contain primary fluid-inclusion assemblages of all three types, which show similar phase transition temperatures and are trapped between 210 and 320 °C. The late stage (stage 4) quartz and calcite contain only type III aqueous inclusions with trapping temperatures of 150–230 °C. The δ34S values of the hydrothermal sulfides from the main stage range from 7.7‰ to 12.6‰ with an average of 10.15‰. The δ18O values of hydrothermal quartz mainly occur between 9.7‰ and 15.1‰ (mainly 10.7‰–12.5‰, average 12.4‰); calculated fluid δ18O values are from 0.97‰ to 10.79‰ with a median value of 5.5‰. The δDwater values calculated from hydrothermal sericite range from −67‰ to −48‰. Considering the fluid-inclusion compositions, δ18O and δD compositions of ore-forming fluids, and regional geological events, the most likely ultimate potential fluid and metal would have originated from dehydration and desulfidation of the subducting paleo-Pacific slab and the subsequent devolatilization of the enriched mantle wedge. Fluid immiscibility occurred during the main ore-forming stage due to pressure decrease from the early stage (165–200 MPa) to the main stage (90–175 MPa). Followed by the changing physical and chemical conditions, the metallic elements (including Au) in the fluid could no longer exist in the form of complexes and precipitated from the fluid. Water–rock sulfidation and pressure fluctuations, with associated fluid unmixing and other chemical changes, were the two main mechanisms of gold deposition.

The polymetallic magmatic-hydrothermal Xiangdong and Dalong systems in the W–Sn–Cu–Pb–Zn–Ag Dengfuxian orefield, SE China: constraints from geology, fluid inclusions, H–O–S–Pb isotopes, and sphalerite Rb–Sr geochronology

Vein-type deposits, including the Xiangdong W–Sn and Dalong Pb–Zn deposits, occur in or near the Dengfuxian composite granite pluton, comprising predominantly Triassic and minor Jurassic intrusions. Liquid-rich NaCl-aqueous inclusions, vapor-rich NaCl-aqueous inclusions, liquid-rich CaCl2-NaCl-aqueous inclusions, two-phase CH4-rich inclusions, three-phase CO2-H2O inclusions, and three-phase calcite-bearing inclusions occur in the quartz veins at Xiangdong, whereas only liquid-rich NaCl-aqueous inclusions occur at Dalong. The Xiangdong veins formed at temperatures near 241 °C, from NaCl-CaCl2-H2O-CH4-CO2 fluids averaging 11.4 wt% NaCl eq. The Dalong deposit formed at temperatures near 186 °C from NaCl-H2O(-CH4) fluids averaging 6.2 wt% NaCl eq. The ore-forming mechanisms at Xiangdong include fluid immiscibility during stage I, fluid mixing during stage II, and mixing with meteoric water accompanied by cooling during stage III. The ore-forming mechanisms at Dalong include cooling and mixing with meteoric water. Oxygen and hydrogen isotopes suggest that the ore-forming fluids from both deposits originated as mixtures of magmatic water with various amounts of meteoric water. Sulfur and strontium isotopes suggest an igneous origin for both deposits and possibly mixing with S and Sr from sedimentary rock for Dalong. Lead isotopes indicate that ore metals originated mainly from the upper crust with minor mantle contributions. Sphalerite from Dalong gives a Rb-Sr isochron age of 151.6 ± 7.1 Ma, consistent with the mineralization age of Xiangdong. Both the W–Sn and Pb–Zn ore-forming events are closely related to Late Jurassic magmatism, which occurred in an environment of lithospheric extension and thinning.

Fluid inclusion constraints on the genesis of the Puladi muscovite deposit in Gongshan County, Yunnan Province

This paper focuses on beryl mines in the Maji region of Yunnan Province, which are characterized by fluid inclusions. Based on petrography theory, mineralogy, and ore-forming geological conditions, beryl can be divided as CO2 and CO2-H2O inclusions. In addition, the characteristics of inclusions in the coordinate of A/B is summarized. The homogenization temperature of fluid inclusions in the coordinate of A ranges from 250 °C to 397 °C, while the salinity of fluid inclusions ranges from 0.18% to 4.27%. By contrast, the homogenization temperature in the coordinate of B ranges from 210 °C to 340 °C, and the salinity is from 0.22% to 5.11%. The pressure of ore-forming fluid in the coordinate of A/B is approximately 83 MPa with densities of 0.8034 g/m3 and 0.8363 g/m3, which are characteristic of mediumtemperature, low-salinity, and medium-density fluids. Based on Raman spectra and different metallogenic depths, the two types of beryl belong to different metallogenic belts. The beryl deposits in Gongshan are of medium-temperature gas–hydrothermal type.

Geology, Fluid Inclusion Characteristics and H–O–C Isotopes of Large Lijiagou Pegmatite Spodumene Deposit in Songpan–Garze Fold Belt, Eastern Tibet: Implications for ore Genesis

AbstractThe large, newly discovered Lijiagou pegmatite spodumene deposit, is located southeast of the Ke'eryin pegmatite ore field, in the central Songpan–Garze Fold Belt (SGFB), Eastern Tibet. The Lijiagou albite spodumene pegmatites are unzoned, granite‐pegmatites of the subtype LCT (Lithium, Cesium, and Tantalum) and consist of medium‐ to coarse‐grained spodumene, lepidolite, microcline, albite, quartz, muscovite, and accessory amounts of beryl, cassiterite, columbite–tantalite and zircon. Secondary fluid inclusions in quartz and spodumene include two‐phase aqueous inclusions (V + L), mono‐phase vapor inclusions (V); three‐phase CO2‐rich CO2–H2O inclusions (CO2 + V + L) and less abundant liquid inclusions (L). The homogenization temperature of the fluid inclusions are low (257.3 to 204.3°C in early stage, 250.3 to 199.6°C in middle stage, 218.7 to 200.6°C in late stage). Fluid inclusions were formed during the long cooling period from the temperature of the pegmatite emplacement. Liquid–vapor–gas boiling was extensive during the middle and late stages. The salinity of the corresponding stages are 15.4 to 13.0 wt.% NaCl equiv., 12.5 to 9.1 wt.% NaCl equiv. and 9.8 to 7.8 wt.% NaCl equiv., respectively. δ18O values of fluid are 7.2 to 5.2‰, 5.6 to 3.9‰ and 2.7 to −0.2‰ from early to late stages; and δD range from −75.1 to −76.8‰, −59.0 to −73.5‰ and −61.6 to −85.5‰ respectively. The δ13C of CO2 values are −5.6 to −6.6‰, −8.5 to −19.9‰, −11.8 to −18.7‰ from early to late stages, suggesting that CO2 in the fluids were probably sourced from a magmatic system, possibly with some mixing of CO2 dissolved in groundwater. δD and δ18O values of fluid indicate that the fluids were originally magmatic water and mixed with some meteoric water in late stage. The magma evolution sequence in the Ke'eryin orefield, from the central two‐mica granite through the Lijiagou deposit out to the distal pegmatites, with the ages gradually decreasing, indicates that the Ke'eryin complex rocks are the product of multistage magmatic activity. The large Lijiagou spodumene deposit is a typical magmatic, fractional crystallization related pegmatite deposit.

Geology and fluid inclusion geochemistry of the Zijinshan high-sulfidation epithermal Cu-Au deposit, Fujian Province, SE China: Implication for deep exploration targeting

The giant Zijinshan Cu-Au deposit in the Zijinshan orefield, Fujian Province, southeastern China, is the first high-sulfidation epithermal deposit identified in mainland China. The Cu and Au orebodies occur as veins and pods in the NW-trending faults and breccias zones. Intensive and pervasive alteration is characterized by downward and outward zoning from intensively leached silicic alteration (or vuggy quartz, Q), through alunite-quartz-pyrite alteration (advanced aragillic alteration, Q-Alu) and the quartz-alunite alteration overprinting the sericite alteration (Q-Alu-Di-Srt), to sericite (or phyllic) alteration zone. Gold mineralization mainly occurs in the silicic alteration zone, while the copper mineralization is confined in the alunite-quartz alteration zone. On the basis of detailed petrographic study, an early porphyry type mineralization stage, characterized by chalcopyrite-bornite-molybdenite-pyrite-sericite assemblage is recognized at Zijinshan, which is subsequently and strongly overprinted by the sulfate alteration and high-sulfidation Cu-Au mineralization stages. A supergene stage is also identified at shallow depth of the deposit, with gold largely enriched but copper commonly leached. The ore-forming fluids related to the early sericite alteration and possibly porphyry type mineralization are high-temperature, high-salinity magmatic water, characterized by the presence of the halite-bearing inclusions. The CO2-H2O (C-type) inclusions are mostly vapor-rich and abundantly identified in the samples with advance argillic alteration (alunite alteration). They are regarded to be the buoyant vapor phase by fluid boiling of a single-phase, low- to moderate-salinity magmatic fluid at depth, where a separated saline phase and related porphyry mineralization might be expected. A group of secondary inclusions coexisting with enargite grains are recognized in the samples with alunite alteration and suggested to be trapped from the ore-forming fluids of the Cu-Au mineralization stage. The total homogenization temperatures and salinities of the secondary inclusions are below 300°C (peaking at 260–280°C) and under 10wt% NaCl eqv., respectively. Intensive fluid boiling is the major mechanism for the formation of the giant high-sulfidation Cu (covellite-, digenite-dominated) orebodies in the Zijinshan deposit. It is a deep-seated high-sulfidation epithermal deposit according to the estimated depth of 1.4–2.1km from the C-type inclusions in quartz grains from the alunite alteration zone. By fluid inclusion mapping of a nearly NW-trending cross section profile, the isotherms are extrapolated using the average total homogenization temperatures and the possible heat source is suggested. It is indicated that the heat source and possible concealed porphyry mineralization nearly coeval to the high-sulfidation Cu-Au mineralization at Zijinshan might be located at the southeastern Zijinshan deposit or the northern area between the Zijinshan and Wuziqilong deposits, where deep drilling is encouraged.

Geology, Fluid Inclusions, and Isotopic Geochemistry of the Jinman Sediment‐Hosted Copper Deposit in the Lanping Basin, China

AbstractThe Jinman Cu polymetallic deposit is located within Middle Jurassic sandstone and slate units in the Lanping Basin of southwestern China. The Cu mineralization occurs mainly as sulfide‐bearing quartz–carbonate veins in faults and fractures, controlled by a Cenozoic thrust–nappe system. A detailed study of fluid inclusions from the Jinman deposit distinguishes three types of fluid inclusions in syn‐ore quartz and post‐ore calcite: aqueous water (type A), CO2–H2O (type B), and CO2‐dominated (type C) fluid inclusions.The homogenization temperatures of CO2–H2O inclusions vary from 208°C to 329°C, with corresponding salinities from 0.6 to 4.6 wt.% NaCl equivalent. The homogenization temperatures of the aqueous fluid inclusions mainly range from 164°C to 249°C, with salinities from 7.2 to 20.2 wt.% NaCl equivalent. These characteristics of fluid inclusions are significantly different from those of basinal mineralization systems, but similar to those of orogenic or magmatic mineralization systems. The H and O isotope compositions suggest that the ore‐forming fluid is predominantly derived from magmatic water, with the participation of basinal brine. The δ34S values are widely variable between −9.7 ‰ and 9.7 ‰, with a mode distribution around zero, which may be interpreted by the variation in physico‐chemical conditions or by compositional variation of the sources. The mixing of a deeply sourced CO2‐rich fluid with basinal brine was the key mechanism responsible for the mineralization of the Jinman deposit.

Fluid Inclusions and Hydrogen, Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit, Northern Taihang Mountains, China

AbstractThe Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO2–H2O inclusions, and pure CO2 inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to &gt;500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO2–H2O to the NaCl–H2O system. The δ18OH2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and −117.5‰ to −134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (208Pb/204Pb, 36.320–37.428; 207Pb/204Pb, 15.210–15.495; 206Pb/204Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.