CO2 Reduction Research Articles

Controlling the Polarity of Metal–Organic Frameworks to Promote Electrochemical CO2 Reduction

AbstractThe addition of polar functional groups to porous structures is an effective strategy for increasing the ability of metal–organic frameworks (MOFs) to capture CO2 by enhancing interactions between the dipoles of the polar functional groups and the quadrupoles of CO2. However, the potential of MOFs with polar functional groups to activate CO2 has not been investigated in the context of CO2 electrolysis. In this study, we report a mixed‐ligand strategy to incorporate various functional groups in the MOFs. We found that substituents with strong polarity led to increased catalytic performance of electrochemical CO2 reduction for these polarized MOFs. Both experimental and theoretical evidence indicates that the presence of polar functional groups induces a charge redistribution in the micropores of MOFs. We have shown that higher electron densities of sp2‐carbon atoms in benzimidazolate ligands reduces the energy barrier to generate *COOH, which is simultaneously controlled by the mass transfer of CO2. Our research offers an effective method of disrupting local electron neutrality in the pores of electrocatalysts/supports to activate CO2 under electrochemical conditions.

Evaluation of solar distiller performance using steel wool pads, internal reflectors, and woven wire mesh: economic, environmental, and sustainability analysis

Abstract Different researches were performed by using thermal storage materials, solar concentrators, reflectors, and other technologies to increase the productivity of solar stills. The main objective of the present study is to enhance the basin solar still productivity by using ecomaterials from the wastes of workshops and factories. So, this study presents an experimental investigation of basin solar still performance using steel wool pads, internal reflectors, and woven wire mesh. The experimental setup was performed at Suez Canal University, Ismailia City, Egypt. Two solar stills were included: one represents the conventional design (CSS), and the second one is the modified with steel wool pads, internal reflectors, and woven wire mesh (MSS). Both solar stills were evaluated under identical climate conditions, considering water depths of 1, 2, 3, and 4 cm, and the required parameters were measured and tabulated during the working days. The results indicated that incorporating these modifications led to a notable increase in accumulative productivity and daily thermal efficiency with minimum cost per liter. The MSS enhanced the daily yield and thermal efficiency by 22.1% and 28.0%, respectively, versus CSS at a water depth of 1 cm. In addition, the energy production factor (EPF), energy payback time (EPT), and the average exergy waste were 1.2 years, 0.85, and 400.2 J, respectively, for MSS. The annual exergy output, environmental effect factor (EEF), improvement potential (IP), and sustainability index were 462.7 kWh, 10.4, 290.6 W, and 1.09, respectively, for MSS. Finally, the cost per liter and the annual CO2 reduction over a lifetime for CSS and MSS were 0.023 $/l, 17.4 tons, and 0.11 $/l, 20.4 tons, respectively. These results align with and reinforce previous publications on desalination, highlighting the potential of these modifications for addressing the pressing challenges of affordable and efficient water using solar energy.

Molecular level insights on the pulsed electrochemical CO2 reduction.

Electrochemical CO2 reduction reaction (CO2RR) occurring at the electrode/electrolyte interface is sensitive to both the potential and concentration polarization. Compared to static electrolysis at a fixed potential, pulsed electrolysis with alternating anodic and cathodic potentials is an intriguing approach that not only reconstructs the surface structure, but also regulates the local pH and mass transport from the electrolyte side in the immediate vicinity of the cathode. Herein, via a combined online mass spectrometry investigation with sub-second temporal resolution and 1-dimensional diffusion profile simulations, we reveal that heightened surface CO2 concentration promotes CO2RR over H2 evolution for both polycrystalline Ag and Cu electrodes after anodic pulses. Moreover, mild oxidative pulses generate a roughened surface topology with under-coordinated Ag or Cu sites, delivering the best CO2-to-CO and CO2-to-C2+ performance, respectively. Surface-enhanced infrared absorption spectroscopy elucidates the potential dependence of *CO and *OCHO species on Ag as well as the gradually improved *CO consumption rate over under-coordinated Cu after oxidative pulses, directly correlating apparent CO2RR selectivity with dynamic interfacial chemistry at the molecular level.

Design of Bimetallic Boronene Structures Leveraging Neighboring Effects for Efficient Electrocatalytic CO2 Reduction Reaction

AbstractElectrocatalytic CO2 reduction (CO2RR) offers a promising avenue to address rising atmospheric CO2 levels by producing high‐value chemicals. However, the development of efficient, long‐lasting catalysts remains challenging. In this study, particle swarm optimization is employed to design a novel bimetallic boronene structure, thereby enhancing CO2RR activity through precise tuning of the metal‐substrate microenvironment. Through high‐throughput screening, seven CuMB4 (M = V, Zn, Nb, Ag, Cd, Ta, Au) monolayers are identified as promising CO2RR catalysts based on stability, conductivity, catalytic activity, and selectivity. These materials, characterized by hyper‐coordination and neighboring bimetallic effects, are proposed for synthesis via self‐assembled surface growth. Notably, CuZnB4 exhibited exceptional theoretical catalytic activity, characterized by remarkably low limiting potentials (UL) of −0.16 V for CH4 and −0.27 V for C2H4, as well as low kinetic barriers of 0.65 and 0.53 eV, respectively. The enhanced activity results from neighboring effects optimizing densely populated boron active sites and the ability to suppress hydrogen evolution reactions. Additionally, this study explored intrinsic properties influencing catalytic activity using volcano plots, descriptor analysis, and electron density evaluation. Unlike traditional catalysts prone to oxidation, CuMB4 varieties possess self‐activating properties, facilitating the conversion of *O/*OH to H2O and enhancing CO2 conversion. This research introduces robust CO2RR catalysts and provides insights into manipulating neighboring effects, thus guiding future catalyst design.

Unveiling the Structural Effects in Hybrid Copper Phosphonate Frameworks for Selective Electrocatalytic CO2 Reduction Reaction.

Electrochemical CO2 reduction holds tremendous promise for transforming carbon dioxide into several value-added energy feedstocks and utilizing renewable energy sources. Herein, we have developed two novel copper-based organophosphonates for selective electrocatalytic conversion of CO2 to CH3OH conversion. The two-dimensional layer structure of Cu3[(Hhedp)2(C4H4N2)].2H2O (I) and the three-dimensional Cu3[(H3hedp)2(C4H4N2)4(SO4)].2H2O (II) have been isolated as single crystals via a hydrothermal strategy. Compound I consists of Cu2+ oxidation states exclusively, while compound II has Cu1+ oxidation states in a network wherein a Cu2+-phosphonate template is embedded inside the framework. Depending on mixed valent oxidation states, compound II exhibits high selectivity compared to compound I for the electrocatalytic reduction of CO2 to CH3OH (C1) as the primary product and CH3COOH (C2) as the secondary product. Notably, product selectivity is enhanced as the Faradaic efficiency (FE) of the competing hydrogen evolution reaction (HER) is significantly reduced in compound II relative to that of I, particularly at higher applied reduction potentials. The optimal ratio of Cu1+ active sites in compound II plays a pivotal role in enhancing methanol selectivity, stabilizing critical intermediates, and maintaining ideal reduction potentials as a noble-metal free electrocatalyst. Moreover, the optical band gap and the Mott-Schottky measurements further suggest the title Cu-phosphonate materials could be promising and effective photocatalysts.

Buildings in Hot Climate Zones—Quantification of Energy and CO2 Reduction Potential for Different Architecture and Building Services Measures

Reducing energy and associated greenhouse gas emissions in buildings is one of the key aspects of climate change on a global level. To put the building sector on a low carbon development path, policies and adequate financing play a crucial role in each region. In the global South, policies and regulations related to the decarbonization of the building stock are increasingly being implemented. For policy and decision makers, adequate data on the status quo of the building stock, as well as the quantification of energy reduction measures, are essential to make informed decisions on the building regulatory and funding framework. The objective of this study is to provide data-driven insights into the potential for energy and CO2 reduction in buildings across various hot climate zones in the Global South. A simulation-based approach was employed to model five different building types, ranging from residential homes to office buildings, under a variety of architectural and building services scenarios. The simulations were conducted using the dynamic building energy simulation tool EnergyPlus, which assessed the impact of various energy-saving measures under both current and projected future climate conditions. This study concludes that optimizing passive design features, such as improved windows, solar shading, and reflective surfaces, in conjunction with active systems like decentralized cooling units and renewable energy integration, can result in a notable reduction in energy demand and emissions. Our findings provide a robust basis for policymakers to develop targeted energy efficiency strategies for buildings in hot climate zones, which will play a crucial role in achieving climate goals in the Global South.

Regulating the Microenvironment of Zn‐Based Metal‐Organic Framework for Enhanced CO2 Electroreduction to Formate

Electrocatalytic CO2 reduction (ECR) has emerged as one of the most promising strategies to alleviate the energy crisis and CO2 pollution, for which a wide variety of catalysts are under development. Metal‐organic frameworks (MOFs) with clear and designable structures are an excellent platform for ECR. Here, two isostructural N, O‐coordinated Zn‐MOFs, FJU‐126‐4F and FJU‐126‐CH3, based on terephthalic acid ligand with different groups (one is ‐4F, the other is ‐CH3) on the benzene ring, have been constructed for ECR catalysts. Significantly, the different functional groups make the performance difference of ECR. The maximum Faraday efficiency of formate (FEformate) for FJU‐126‐4F is 60.5% with the partial current density of formate (jformate) of ‐19.35 mA cm‐2 at ‐1.47 V, while the optimum FEformate of FJU‐126‐CH3 is 50.2% with the jformate of ‐10.04 mA cm‐2 at ‐1.57 V. The work provides insight into the rational design of MOF catalysts for ECR.

Simultaneous Photocatalytic CO2 Reduction and H2O Oxidation Under Non-Sacrificial Ambient Conditions.

The utilization of CO2, H2O, and solar energy is regarded as a sustainable route for converting CO2 into chemical feedstocks, paving the way for carbon neutrality and reclamation. However, the simultaneous photocatalytic CO2 reduction and H2O oxidation under non-sacrificial ambient conditions is still a significant challenge. Researchers have carried out extensive exploration and achieved dramatic developments in this area. In this review, we first primarily elucidate the principles of two half-reactions in the photocatalytic conversion of CO2 with H2O, i. e., CO2 reduction by the photo-generated electrons and protons, and H2O oxidation by the photo-generated holes without sacrificial agents. Subsequently, the strategies to promote two half-reactions are summarized, including the vacancy/facet/morphology design, adjacent redox site construction, and Z-scheme heterojunction development. Finally, we present the advanced in situ characterizations and future perspectives in this field. This review aims to provide fresh insights into effectively simultaneous photocatalytic CO2 reduction and H2O oxidation under non-sacrificial ambient conditions.

Proton Pool for the Mitigation of Salt Precipitate Enhancing CO2 Electroreduction in a Flow Cell

Flow cells featuring a gas diffusion electrode (GDE) have emerged as an attractive platform for electrochemical CO2 reduction, offering high current densities (~300 mA·cm−2) and low energy consumption. However, the formation of salt precipitates, particularly carbonate and bicarbonate, poses a significant deficiency by reducing the cell’s operational longevity. In this study, we present a novel approach to mitigate salt precipitates in real-time through acid–base interaction. Recovery efficiency and partial current density of the cell were used to evaluate the capability of removing salt precipitates and the maintenance of CO2 reduction reactions (CO2RRs). It was suggested that the direct treatment of intermittent acid rinse recovers the performance of CO2RRs to a large extent (>97%), and the modification of the proton exchange resin reduces the reduction rate of partial current densities to 1/15 than that of the unmodified. This improvement enhances the cell’s catalytic performance, enabling the stability test for catalysts within the GDE-based flow cell.

Parameter Dependency of Electrochemical Reduction of CO2 in Acetonitrile - A Data Driven Approach.

The electrochemical CO2 reduction reaction (CO2RR) is a promising technology for the utilization of captured CO2. Though systems using aqueous electrolytes is the state-of-the-art, CO2RR in aprotic solvents are a promising alternative that can avoid the parallel hydrogen evolution reaction (HER). While system parameters, such as electrolyte composition, electrode material, and applied potential are known to influence the reaction mechanism, there is a lack of intuitive understanding as to how. We show that by using multivariate data analysis on a large dataset collected from the literature, namely random forest modelling, the most important system parameters can be isolated for each possible product. We find that water content, current density, and applied potential are powerful determinants in the reaction pathway, and therefore in the Faradaic efficiency of CO2RR products.

Tuning the Electronic Properties of CumAgn Bimetallic Clusters for Enhanced CO2 Activation

The urgent demand for efficient CO2 reduction technologies has driven enormous studies into the enhancement of advanced catalysts. Here, we investigate the electronic properties and CO2 adsorption properties of CumAgn bimetallic clusters, particularly Cu4Ag1, Cu1Ag4, Cu3Ag2, and Cu2Ag3, using generalized gradient approximation (GGA)/density functional theory (DFT). Our results show that the atomic arrangement within these clusters drastically affects their stability, charge transfer, and catalytic performance. The Cu4Ag1 bimetallic cluster emerges as the most stable structure, revealing superior charge transfer and effective chemisorption of CO2, which promotes effective activation of the CO2 molecule. In contrast, the Cu1Ag4 bimetallic cluster, in spite of comparable adsorption energy, indicates insignificant charge transfer, resulting in less pronounced CO2 activation. The Cu3Ag2 and Cu2Ag3 bimetallic clusters also display high adsorption energies with remarkable charge transfer mechanisms, emphasizing the crucial role of metal composition in tuning catalytic characteristics. This thorough examination provides constructive insights into the design of bimetallic clusters for boosted CO2 reduction. These findings could pave the way for the development of cost-effective and efficient catalysts for industrial CO2 reduction, contributing to global efforts in carbon management and climate change mitigation.

Reductive Transformation of CO2 to Organic Compounds.

Carbon dioxide is a major greenhouse gas and a safe, abundant, easily accessible, and renewable C1 resource that can be chemically converted into high value-added chemicals, fuels and materials. The preparation of urea, organic carbonates, salicylic acid, etc. from CO2 through non-reduction conversion has been used in industrial production, while CO2 reduction transformation has become a research hotspot in recent years due to its involvement in energy storage and product diversification. Designing suitable catalysts to achieve efficient and selective conversion of CO2 is crucial due to its thermodynamic stability and kinetic inertness. From this perspective, the redistribution of charges within CO2 molecules through the interaction of Lewis acid/base or metal complexes with CO2, or the forced transfer of electrons to CO2 through photo- or electrocatalysis, is a commonly used effective way to activate CO2. Based on understanding of the activation/reaction mechanism on a molecular level, we have developed metal complexes, metal salts, inorganic/organic salts, ionic liquids, as well as nitrogen rich and porous materials as efficient catalysts for CO2 reductive conversions. The goal of this personal account is to summarize the catalytic processes of CO2 reductive conversion that have been developed in the past 7 years: 1) For the reductive functionalization of CO2, the major challenge lies in accurately adjusting reaction parameters (such as pressure) to achieve high catalytic efficiency and the product selectivity; 2) For photocatalytic or electrocatalytic reduction of CO2, how to suppress competitive hydrogen evolution reactions and improve catalyst stability are key points that requires continuous attention.

Ionomer and Membrane Designs for Low-temperature CO2 and CO Electrolysis.

Low-temperature electroreduction of CO2 and CO (CO(2)RR) into valuable chemicals and fuels offers a promising pathway to reduce greenhouse gas emissions and achieve carbon neutrality. Today's low-temperature CO(2)RR technology relies on the use of ionomers, polymers with ionized groups, primarily as catalyst layer (CL) additives. In the meantime, ionomers can assemble into ion-exchange membranes (IEMs), serving as important components of electrolyzers. According to the ion-exchange functions, ionomer additives are classified as cation-exchange ionomers (CEIs) and anion-exchange ionomers (AEIs); similarly, IEMs are divided into cation-exchange membranes (CEMs) and anion-exchange membranes (AEMs), as well as the multilayer polymer electrolytes (MPEs). Recent studies show that ionomer additives can regulate the catalytic microenvironment and thereby enhance performance towards desired products. This Review discusses the roles of ionomer additives and IEMs in CO2 and CO reduction reactions, highlighting the latest mechanistic insights and performance advances. It outlines challenges in designing ionomer additives and IEMs to improve product selectivity, energy efficiency (EE), and operational lifetime of CO(2)RR electrolyzers, while also providing perspectives on future research directions. The aim is to connect the current status of ionomer and membrane development with performance metrics analysis, offering insights for the advancement of commercially relevant low-temperature CO(2)RR electrolyzers.

Triazolium-Catalyzed Metal-Free Photochemical Reduction of CO2 into Formate

Triazolium-Catalyzed Metal-Free Photochemical Reduction of CO₂ into Formate

Recent advances and future perspectives of metal-organic frameworks as efficient electrocatalysts for CO2 reduction

AbstractThe conversion of carbon dioxide (CO2) to the reduced chemical compounds offers substantial environmental benefits through minimizing the emission of greenhouse gas and fostering sustainable practices. Recently, the unique properties of metal-organic frameworks (MOFs) make them attractive candidates for electrocatalytic CO2 reduction reaction (CO2RR), providing many opportunities to develop efficient, selective, and environmentally sustainable processes for mitigating CO2 emissions and utilizing CO2 as a valuable raw material for the synthesis of fuels and chemicals. Here, the recent advances in MOFs as efficient catalysts for electrocatalytic CO2RR are summarized. The detailed characteristics, electrocatalytic mechanisms, and practical approaches for improving the electrocatalytic efficiency, selectivity, and durability of MOFs under realistic reaction conditions are also clarified. Furthermore, the outlooks on the prospects of MOF-based electrocatalysts in CO2RR are provided.

Cold Plasma Techniques for Sustainable Material Synthesis and Climate Change Mitigation: A Review

In recent years, the emission of greenhouse gases (GHGs) has increased significantly, contributing to global warming. Among these GHGs, CH4, CO2, and CO are particularly potent contributors. Remediation techniques primarily rely on materials capable of capturing, storing, and converting these gases. Catalytic processes, particularly heterogeneous catalysis, are essential to chemical and petrochemical industries as well as environmental remediation. Due to the growing demand for catalysts, efforts are being made to reduce energy consumption and make technologies more environmentally friendly. Green chemistry emphasizes minimizing the use of hazardous reactants and harmful solvents in chemical processes. Achieving these principles should be paired with processes that reduce time and costs in catalyst preparation while improving their efficiency. Non-thermal plasma (NTP) has been widely used for the preparation of supported metal catalysts. NTP has attracted significant attention for its ability to improve the physicochemical properties of catalysts, enhancing process efficiency through low-temperature operation and shorter processing times. NTP has been applied to various catalyst synthesis techniques, including reduction, oxidation, metal oxide doping, surface etching, coating, alloy formation, surface treatment, and surface cleaning. Plasma-prepared transition-metal catalysts offer advantages over conventionally prepared catalysts due to their unique material properties. These properties enhance catalytic activity by lowering the activation energy barrier, improving stability, and increasing conversion and selectivity compared to untreated samples. This review demonstrates how plasma activation modifies material properties and, based on extensive literature, illustrates its potential to combat climate change by converting CO2, CH4, CO, and other gases, showcasing the benefits of plasma-treated materials and catalysts. A succinct introduction to this review outlines the advantages of plasma-based synthesis and modification over traditional synthesis techniques. The introduction also highlights the various types of plasma and their physical characteristics across different factors. Additionally, this review addresses methods by which materials are synthesized and modified using plasma. The latter section of this review discusses the use of non-thermal plasma for greenhouse gas mitigation, covering applications such as the dry reforming of CH4, CO and CH4 oxidation, CO2 reduction, and other uses of plasma-modified catalysts.

Isolated FeN3 sites anchored hierarchical porous carbon nanoboxes for hydrazine‐assisted rechargeable Zn‐CO2 batteries with ultralow charge voltage

AbstractZn‐CO2 batteries (ZCBs) are promising for CO2 conversion and electric energy release. However, the ZCBs couple the electrochemical CO2 reduction (ECO2R) with the oxygen evolution reaction and competitive hydrogen evolution reaction, which normally causes ultrahigh charge voltage and CO2 conversion efficiency attenuation, thereby resulting in ~90% total power consumption. Herein, isolated FeN3 sites encapsulated in hierarchical porous carbon nanoboxes (Fe‐HPCN, derived from the thermal activation process of ferrocene and polydopamine‐coated cubic ZIF‐8) were proposed for hydrazine‐assisted rechargeable ZCBs based on ECO2R (discharging process: CO2 + 2H+ → CO + H2O) and hydrazine oxidation reaction (HzOR, charging process: N2H4 + 4OH− → N2 + 4H2O + 4e−). The isolated FeN3 endows the HzOR with a lower overpotential and boosts the ECO2R with a 96% CO Faraday efficiency (FECO). Benefitting from the bifunctional ECO2R and HzOR catalytic activities, the homemade hydrazine‐assisted rechargeable ZCBs assembled with the Fe‐HPCN air cathode exhibited an ultralow charge voltage (decreasing by ~1.84 V), excellent CO selectivity (FECO close to 100%), and high 89% energy efficiency. In situ infrared spectroscopy confirmed that Fe‐HPCN can generate rate‐determining *N2 and *CO intermediates during HzOR and ECO2R. This paper proposes FeN3 centers for bifunctional ECO2R/HzOR performance and further presents the pioneering achievements of ECO2R and HzOR for hydrazine‐assisted rechargeable ZCBs.

Efficient UV-Vis-NIR Responsive CO2 Reduction Photocatalyst with Black Pinecone-Shaped Carbon Nitride Loaded with Lanthanum Oxide.

Photothermal catalysis combines the advantages of photocatalysis and thermal activation, which provides a new research angle for CO2 catalytic reduction. In this study, Black carbon nitride with a three-dimensional (3D) pinecone-shaped structure (BPCN) was prepared by a simple solvothermal method using melamine as a precursor without the aid of a template. Lanthanum oxide doping on the BPCN catalysts (BPCN-La) was achieved by ultrasonic impregnation. This unique pinecone-shaped structure consists of self-assembled and interlaced carbon nitride rods (by SEM). The lanthanum element was distributed on the surface of the CN framework in the form of La2O3 (by XPS). The chemical structures of the samples were characterized by solid-state 13C nuclear magnetic resonance (13C NMR) and elaborated by density functional theory (DFT) analysis. This black carbon nitride expanded the light absorption band edge into the near-infrared (NIR) (300-1400 nm, by UV-vis absorption spectra) and had excellent photothermal conversion activity. La atom doping can significantly boost photogenerated electron excitation (by photocurrent test) and promote carrier separation and transfer (by PL). Upon incorporation of La atoms into BPCN, the highest occupied molecular orbital (HOMO) orbital is more concentrated on the oxygen atoms of La2O3. BPCN-La considerably narrowed the band gap width, exhibited an exceptional photothermal effect, and provided a large surface area, which significantly enhanced the photocatalytic reduction of CO2 reactions. The yields of CO reached 58.2 and 104.9 μmol·h-1·g-1 for BPCN and BPCN-La, respectively, with GCN as the control (6.3 μmol·h-1·g-1). Theoretical reaction pathways and selectivity for the photoreduction of CO2 on BPCN and BPCN-La were studied by DFT simulation. This work provides a new vision for the design of photothermal synergistic without extra-thermal input and full spectral response photocatalysts with high efficiency.

Amyloid-Like Protein-Modified Carbon Nitride as a Bioinspired Material for Enhanced Photocatalytic CO2 Reduction.

Modification of g-C3N4 with metal-free biomaterials through an environmentally friendly, low-energy, facile, and rapid single-step method is desired for the preparation of photocatalysts with efficient activity and high selectivity of CO2 reduction but remains a great challenge. Herein, we develop a phase-transitioned protein modification strategy for photocatalysts through superfast amyloid-like protein assembly on surfaces using a one-step sequential coating method. Metal-free carbon nitride/protein heterojunction composite photocatalysts (the phase-transitioned lysozyme (PTL), phase-transitioned bovine serum albumin (PTB), and phase-transitioned ovalbumin (PTO)-coated carbon nitride@SiO2 (CN@SiO2) and bioinspired carbon nitride hollow nanospheres (CN-HS) obtained by etching of CN@SiO2) are prepared using lysozyme, bovine serum albumin, and ovalbumin. The insulator-semiconductor heterojunctions formed at the protein-carbon nitride interface promote the migration and separation of photogenerated charges. The exposed hydrophobic alkyl and aryl groups of the surface-modified protein enable the formation of a CO2-aqueous solution-photocatalyst three-phase interface on the catalyst surface and the exposed -NH2 groups provide sites for CO2 adsorption, which effectively increases CO2 mass transfer and its adsorption as well as hydrophobicity, promoting CO2 reduction and inhibiting hydrogen production. Therefore, protein modification effectively improves the CO2 reduction activity and CO selectivity. For instance, compared to CN-HS, the CO yield of the PTL-modified CN-HS (1346.5 μmol g-1) increased by 24.5 times and the CO selectivity reached 90.5%. These findings represent a critical advancement in the surface modification of carbon nitride for CO2 reduction and the design of bioinspired materials for various applications.

TM and P dual sites on polymeric carbon nitride enable highly selective CO reduction to C2 products with low potentials: A theoretical perspective.

The CO reduction reaction (CORR) for the production of high-value-added multi-carbon (C2+) products is currently being actively investigated, where searching for high-efficiency catalysts with moderate CO intermediate binding strength and low kinetic barrier for C-C coupling poses a significant challenge. In this study, we employed density functional theory computations to design four synergistic coupling dual sites catalysts for CORR to C2 products, namely, TM-P@melon, by co-doping transition metals (TM = Mn, Fe, Co, and Ni) and phosphorus (P) into the polymeric carbon nitride (i.e., melon-CN). Mn-P@melon and Ni-P@melon exhibit higher selectivity toward C2H5OH and C2H6, respectively, with limiting potentials (C-C coupling kinetic energy barriers) of -0.43V (0.52eV) and -0.17V (0.26eV), respectively. The introduction of TM and P atoms not only narrows the band gap of melon-CN but also favors the coupling of CO and *CHO, providing an active site for C-C coupling, thus facilitating the catalytic reaction. Our work provides rational insights for the design of stable, low-cost, and efficient CORR dual sites catalysts that facilitate the sustainable production of high-value C2 chemicals and fuels.