CNN-based Model Research Articles

Artificial intelligence derived electrocardiograms: a comparative study of network architectures predicting sex and left ventricular dysfunction

Abstract Background Within cardiovascular medicine, AI-driven electrocardiogram (ECG) analysis has emerged as a powerful tool, capable of predicting clinically significant abnormalities. The increasing growth of wearable technologies for ECG monitoring underscores the importance of advancing AI methodologies. While Convolutional Neural Networks (CNNs) have traditionally been the go-to choice for ECG analysis, the rise of Vision Transformers (ViTs), a novel computer vision paradigm, raises the question of their potential superiority. Purpose To compare the performance of CNNs and ViTs in ECG analysis, and to assess the efficiency of lean models using truncated ECG recordings. Methods We trained a model using 12-lead ECGs as input for the binary classification of two outputs: Sex (Male or Female) and Left ventricular dysfunction (LVD, defined as below 35%), determined by echocardiography within 2 weeks of the ECG. Models were developed using full standard ECGs, single lead and truncated recordings (1,2 and 4 10 seconds). We compared CNNs (PyTorch) and ViTs (HuggingFace) performance. We analyzed the explainability of our findings, representing the AI model's focus of interest on ECGs from normal cases versus those with reduced ejection fraction, thereby validating its diagnostic discernment (Fig 1) Results We identified 150,691 and 29,422 patients with valid ECG tests for the Sex and LVD prediction models, respectively. For the Sex outcome, the AUROCs were 0.911 (95% CI: 0.908-0.914) and 0.898 (95% CI: 0.894-0.901) for the CNN-based model and the ViT-based models, respectively, with the difference statistically significant (P-Value < 0.001). For the LVD outcome, the AUROCs were comparable at 0.878 (95% CI: 0.864-0.892) and 0.866 (95% CI: 0.853-0.879) for the CNN-based model and the ViT-based models, respectively, (P-Value = 0.056). Furthermore, we found that 98.8% for the maximal predictive power of the models was achieved within a 2 second time frame of a 12 lead ECG. Similarly, a single lead based model achieved a relatively high AUC for the prediction of LVD. Conclusions AI-ECG models developed with ViT architecture did not surpass CNN-based models in sex classification and LVD identification. Our study highlights the significance of lean models allowing for rapid prediction within 2-second tracings or using a single lead, demonstrates the potential for streamlined AI-ECG applications in clinical practice.

Transfer Learning for Turkish Cuisine Classification

Thanks to developments in data-oriented domains like deep learning and big data, the integration of artificial intelligence with food category recognition has been a topic of interest for decades. The capacity of image classification to produce more precise outcomes in less time has made it a popular topic in computer vision. For the purpose of food categorization, three well-known CNN-based models—EfficientNetV2M, ResNet101, and VGG16—were fine-tuned in this research. Moreover, the pre-trained Vision Transformer (ViT) was used for feature extraction, followed by classification using a Random Forest (RF) algorithm. All the models were assessed on the TurkishFoods-15 dataset. It was found that the ViT and RF models were most effective in accurately capturing food images, with precision, recall, and F1-score values of 0.91, 0.86, and 0.88 respectively.

Evaluation of root canal filling length on periapical radiograph using artificial intelligence.

This work proposes a novel method to evaluate root canal filling (RCF) success using artificial intelligence (AI) and image analysis techniques. 1121 teeth with root canal treatment in 597 periapical radiographs (PARs) were anonymized and manually labeled. First, RCFs were segmented using 5 different state-of-the-art deep learning models based on convolutional neural networks. Their performances were compared based on the intersection over union (IoU), dice score and accuracy. Additionally, fivefold cross validation was applied for the best-performing model and their outputs were later used for further analysis. Secondly, images were processed via a graphical user interface (GUI) that allows dental clinicians to mark the apex of the tooth, which was used to find the distance between the apex of the tooth and the nearest RCF prediction of the deep learning model towards it. The distance can show whether the RCF is normal, short or long. Model performances were evaluated by well-known evaluation metrics for segmentation such as IoU, Dice score and accuracy. CNN-based models can achieve an accuracy of 88%, an IoU of 79% and Dice score of 88% in segmenting root canal fillings. Our study demonstrates that AI-based solutions present accurate and reliable performance for root canal filling evaluation.

Breast Lesion Detection for Ultrasound Images Using MaskFormer

This study evaluates the performance of the MaskFormer model for segmenting and classifying breast lesions using ultrasound images, addressing ultrasound’s limitations. Ultrasound used for breast cancer detection faces challenges like low image contrast and difficulty in the detection of small or multiple lesions, further complicated by variability based on operator skill. Initial experiments with U-Net and other CNN-based models revealed constraints, such as early plateauing in model loss, which indicated suboptimal learning and performance. In contrast, MaskFormer demonstrated continuous improvement, achieving higher precision in breast lesion segmentation and significantly reducing both false positives and false negatives. Comparative analysis showed MaskFormer’s superior performance, with the highest precision and recall rates for malignant lesions and an overall mean average precision (mAP) of 0.943. The model’s ability to detect a diverse range of breast lesions, including those potentially missed by the human eye, especially by less experienced practitioners, underscores its potential. These findings suggest that integrating AI models like MaskFormer could greatly enhance ultrasound performance for breast cancer detection, providing reliable, operator-independent image analysis and potentially improving patient outcomes on a global scale.

Auto encoder-based defense mechanism against popular adversarial attacks in deep learning.

Convolutional Neural Network (CNN)-based models are prone to adversarial attacks, which present a significant hurdle to their reliability and robustness. The vulnerability of CNN-based models may be exploited by attackers to launch cyber-attacks. An attacker typically adds small, carefully crafted perturbations to original medical images. When a CNN-based model receives the perturbed medical image as input, it misclassifies the image, even though the added perturbation is often imperceptible to the human eye. The emergence of such attacks has raised security concerns regarding the implementation of deep learning-based medical image classification systems within clinical environments. To address this issue, a reliable defense mechanism is required to detect adversarial attacks on medical images. This study will focus on the robust detection of pneumonia in chest X-ray images through CNN-based models. Various adversarial attacks and defense strategies will be evaluated and analyzed in the context of CNN-based pneumonia detection. From earlier studies, it has been observed that a single defense mechanism is usually not effective against more than one type of adversarial attack. Therefore, this study will propose a defense mechanism that is effective against multiple attack types. A reliable defense framework for pneumonia detection models will ensure secure clinical deployment, facilitating radiologists and doctors in their diagnosis and treatment planning. It can also save time and money by automating routine tasks. The proposed defense mechanism includes a convolutional autoencoder to denoise perturbed Fast Gradient Sign Method (FGSM) and Projected Gradient Descent (PGD) adversarial images, two state- of-the-art attacks carried out at five magnitudes, i.e., ε (epsilon) values. Two pre-trained models, VGG19 and VGG16, and our hybrid model of MobileNetV2 and DenseNet169, called Stack Model, have been used to compare their results. This study shows that the proposed defense mechanism outperforms state-of-the-art studies. The PGD attack using the VGG16 model shows a better attack success rate by reducing overall accuracy by up to 67%. The autoencoder improves accuracy by up to 16% against PGD attacks in both the VGG16 and VGG19 models.

Predicting physicochemical properties of papayas (Carica papaya L.) using a convolutional neural networks model approach.

The current state of quality assessment methods for agricultural produce, particularly fruits, heavily relies on manual inspection techniques, which could be subjective, time-consuming, and prone to human errors. Consequently, there have been emerging trends and needs for non-destructive methods to evaluate fruit quality accurately and practically. This research aimed to develop a novel approach for predicting the physicochemical properties of papayas using a convolutional neural network (CNN) model that combines image analysis and weight assessment. This study involved capturing images of papayas at different ripening stages, measuring papaya weights, and determining various physicochemical properties such as texture, pH, total soluble solids, and seed weight. A total of 532 images were obtained from 132 papayas, and an additional 1064 images were generated through image augmentation. The dataset was divided into three sets with an 8:1:1 ratio for training, validation, and testing. The CNN model was trained using papaya images and weights as input values to predict and estimate the physicochemical property values. Model performance was evaluated using mean squared error (MSE) and the coefficient of determination (R2) as metrics. The CNN model, integrated with image processing, could predict the diverse physicochemical properties of papayas with high accuracy. The MSE values estimated for the training and validation sets were 0.0284 and 0.1729, respectively. The R2 values for the test dataset ranged from 0.71 to 0.94. These findings demonstrate that CNN-based models could provide detailed and quantitative insights, facilitating improved understanding and management of papaya quality while enhancing predictive modeling accuracy in agriculture. PRACTICAL APPLICATION: This research introduces a new method for accurately predicting the quality of papayas using a computer model. Instead of relying on manual inspection, which can be slow and prone to errors, this model uses images of papayas and their weights to predict properties, including texture, pH, total soluble solids, and seed weight. This can help manage papaya quality better while also improving agricultural production and transportation processes.

Comparative Study of GPT-4Vision and Convolutional Neural Networks in Histopathological Image Analysis

Abstract Introduction/Objective Recent advancements in artificial intelligence (AI), particularly with Large Language Models like ChatGPT-4Vision (GPT-4V), have expanded the potential for automated interpretation of medical images. This study evaluates the diagnostic accuracy of GPT-4V in histopathological analysis of neurodegenerative diseases and compares its performance with traditional Convolutional Neural Networks (CNNs). Methods/Case Report We utilized 1515 histopathological images, including hematoxylin and eosin (H&E) staining and tau immunohistochemistry, from patients with various neurodegenerative diseases, such as Alzheimer’s disease, progressive supranuclear palsy, and corticobasal degeneration. GPT-4V’s performance was assessed through multi- step prompts to assess how textual context influences the image interpretation. In the quantitative analysis, the diagnostic accuracy of GPT-4V and the CNN-based model YOLOv8 was assessed for classifying three tau lesions—astrocytic plaques, neuritic plaques, and tufted astrocytes. The analysis used both zero-shot and few-shot learning methods, where GPT-4V and YOLOv8 were evaluated on their ability to distinguish these lesions using ten hold-out test images and 490 training images per lesion. Results (if a Case Study enter NA) GPT-4V accurately recognized Lewy bodies in all cases, but it showed limited accuracy in identifying neurofibrillary tangles (20%) and Pick bodies (0%) on H&E slides. Notably, GPT-4V often suggested Alzheimer’s disease as a potential diagnosis, relying more on contextual clues, such as the prevalence of certain diseases, rather than direct image analysis. In the tau immunohistochemical analysis, GPT-4V’s diagnoses were strongly influenced by additional information about staining and brain region. However, few-shot learning markedly improved GPT-4V’s diagnostic capabilities from 40% accuracy with zero-shot learning to 90% with few-shot learning, reaching best accuracy with 20-shot learning. This performance compared favorably against YOLOv8, which also achieved 90% accuracy but required 100-shot learning. Conclusion While GPT-4V faces challenges in independently interpreting histopathological images, few-shot learning significantly improves its accuracy. This approach is particularly promising for neuropathology, where acquiring extensive labeled datasets is challenging. The findings highlight the need for ongoing refinement of AI applications in pathology, emphasizing balanced integration of textual and visual data to optimize diagnostic efficacy and reliability.

Enhanced COVID-19 Detection from X-ray Images with Convolutional Neural Network and Transfer Learning.

The global spread of Coronavirus (COVID-19) has prompted imperative research into scalable and effective detection methods to curb its outbreak. The early diagnosis of COVID-19 patients has emerged as a pivotal strategy in mitigating the spread of the disease. Automated COVID-19 detection using Chest X-ray (CXR) imaging has significant potential for facilitating large-scale screening and epidemic control efforts. This paper introduces a novel approach that employs state-of-the-art Convolutional Neural Network models (CNNs) for accurate COVID-19 detection. The employed datasets each comprised 15,000 X-ray images. We addressed both binary (Normal vs. Abnormal) and multi-class (Normal, COVID-19, Pneumonia) classification tasks. Comprehensive evaluations were performed by utilizing six distinct CNN-based models (Xception, Inception-V3, ResNet50, VGG19, DenseNet201, and InceptionResNet-V2) for both tasks. As a result, the Xception model demonstrated exceptional performance, achieving 98.13% accuracy, 98.14% precision, 97.65% recall, and a 97.89% F1-score in binary classification, while in multi-classification it yielded 87.73% accuracy, 90.20% precision, 87.73% recall, and an 87.49% F1-score. Moreover, the other utilized models, such as ResNet50, demonstrated competitive performance compared with many recent works.

Reduction of Misclassifications in Wildfire Detection: A Weighted Ensemble Deep Learning Approach

Governments worldwide are increasingly prioritizing early wildfire detection to safeguard lives, property, and the environment. Although CNN-based models have demonstrated exceptional performance in various computer vision applications, the evolving nature of wildfire images poses significant challenges for a single CNN-based model in wildfire detection. In this study, we addressed this issue by integrating and weighting the differential learning capabilities of three individual transfer learning models: InceptionV3, ResNet50, and VGG16. Experimental results show that the ensemble deep learning models significantly outperformed all single classifiers across all performance metrics. Both the ensemble and weighted ensemble deep learning models achieved 99.7% accuracy, 99.5% precision, 100% recall, 99.8% F1-score, 0.5%false positive rate, 0.0% false negative rate and 0.3% error rate. Additionally, these models reduced the error rate by 98%, 91%, and 40% compared to the error rates of ResNet50, InceptionV3, and VGG16 respectively. A false negative rate of 0% indicates that our proposed ensemble deep learning models identified and predicted all the wildfire instances present in the test set correctly without a single misclassification. This positions our proposed ensemble deep learning models as superior choices for reducing misclassifications in wildfire detection.

Machine/deep learning-assisted hemoglobin level prediction using palpebral conjunctival images.

Palpebral conjunctival hue alteration is used in non-invasive screening for anaemia, whereas it is a qualitative measure. This study constructed machine/deep learning models for predicting haemoglobin values using 150 palpebral conjunctival images taken by a smartphone. The median haemoglobin value was 13.1 g/dL, including 10 patients with <11 g/dL. A segmentation model using U-net was successfully constructed. The segmented images were subjected to non-convolutional neural network (CNN)-based and CNN-based regression models for predicting haemoglobin values. The correlation coefficients between the actual and predicted haemoglobin values were 0.38 and 0.44 in the non-CNN-based and CNN-based models, respectively. The sensitivity and specificity for anaemia detection were 13% and 98% for the non-CNN-based model and 20% and 99% for the CNN-based model. The performance of the CNN-based model did not improve with a mask layer guiding the model's attention towards the conjunctival regions, however, slightly improved with correction by the aspect ratio and exposure time of input images. The gradient-weighted class activation mapping heatmap indicated that the lower half area of the conjunctiva was crucial for haemoglobin value prediction. In conclusion, the CNN-based model had better results than the non-CNN-based model. The prediction accuracy would improve by using more input data with anaemia.

Improved Urdu-English Neural Machine Translation with a fully Convolutional Neural Network Encoder

Neural machine translation (NMT) approaches driven by artificial intelligence (AI) has gained more and more attention in recent years, mainly due to their simplicity yet state-of-the-art performance. Despite NMT models with attention mechanism relying heavily on the accessibility of substantial parallel corpora, they have demonstrated efficacy even for languages with limited linguistic resources. The convolutional neural network (CNN) is frequently employed in tasks involving visual and speech recognition. Implementing CNN for MT is still challenging compared to the predominant approaches. Recent research has shown that the CNN-based NMT model cannot capture long-term dependencies present in the source sentence. The CNN-based model can only capture the word dependencies within the width of its filters. This unnatural character often causes a worse performance for CNN-based NMT than the RNN-based NMT models. This study introduces a simple method to improve neural translation of a low-resource language, specifically Urdu-English (UR-EN). In this paper, we use a Fully Convolutional Neural Network (FConv-NN) based NMT architecture to create a powerful MT encoder for UR-EN translation that can capture the long dependency of words in a sentence. Although the model is quite simple, it yields strong empirical results. Experimental results show that the FConv-NN model consistently outperforms the traditional CNN-based model with filters. On the Urdu-English Dataset, the FConv-NN model produces translation with a gain of 18.42 BLEU points. Moreover, the quantitative and comparative analysis shows that in a low-resource setting, FConv-NN-based NMT outperforms conventional CNN-based NMT models.

Siamese InternImage for Change Detection

For some time, CNN was the de facto state-of-the-art method in remote sensing image change detection. Although transformer-based models have surpassed CNN-based models due to their larger receptive fields, CNNs still retain their value for their efficiency and ability to extract precise local features. To overcome the limitations of the restricted receptive fields in standard CNNs, deformable convolution allows for dynamic adjustment of sampling locations in convolutional kernels, improving the network’s ability to model global contexts. InternImage is an architecture built upon deformable convolution as its foundational operation. Motivated by InternImage, in this paper, a CNN-based change detection vision foundation model is proposed. By introducing deformable convolution into Siamese InternImage architecture, the proposed CNN-based change detection vision foundation model is capable of capturing long-range dependencies and global information. A refinement block is utilized to merge local detail, where channel attention is incorporated. The proposed approach achieved excellent performance on the LEVIR-CD and WHU-CD datasets.

Gel strength prediction in ultrasonicated chicken mince: Fusing near-infrared and Raman spectroscopy coupled with deep learning LSTM algorithm

The meat processing industry faces challenges in maintaining the gel quality in minced chicken products, which affects consumer appeal and overall product quality. This study investigates the use of ultrasonic treatment to improve the gel quality of minced chicken and employs Near-Infrared (NIR) and Raman spectroscopy for rapid, non-destructive gel strength assessment. Initially, ultrasonic treatment was applied at various durations, with optimal results observed at approximately 30 min, significantly improving gel strength, texture profile, and reducing centrifugal loss rate. To comprehensively assess gel strength, Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM) models were established using individual NIR and Raman spectral data, as well as their fusion. The LSTM model with fused NIR-Raman data demonstrated superior performance (Rp2 = 0.9882, RPD = 9.2091), outperforming individual techniques and CNN-based models. This study demonstrates that ultrasonic treatment can effectively improve minced chicken gel quality, while the fusion of NIR and Raman spectroscopy coupled with LSTM deep learning offers a reliable, non-destructive, and rapid method for predicting gel strength. This approach addresses the industry's need for innovative quality assessment methods, potentially improving product quality and consumer satisfaction in the processed chicken market.

HTR-VT: Handwritten text recognition with vision transformer

We explore the application of Vision Transformer (ViT) for handwritten text recognition. The limited availability of labeled data in this domain poses challenges for achieving high performance solely relying on ViT. Previous transformer-based models required external data or extensive pre-training on large datasets to excel. To address this limitation, we introduce a data-efficient ViT method that uses only the encoder of the standard transformer. We find that incorporate a Convolutional Neural Network (CNN) for feature extraction instead of the original patch embedding and employ Sharpness-Aware Minimization (SAM) optimizer to ensure that the model can converge towards flatter minima yield notable enhancements. Furthermore, our introduction of the span mask technique, which masks interconnected features in the feature map, acts as an effective regularizer. Empirically, our approach competes favorably with traditional CNN-based models on small datasets like IAM and READ2016. Additionally, it establishes a new benchmark on the LAM dataset, currently the largest dataset with 19,830 training text lines. The code will be publicly available at: https://github.com/YutingLi0606/HTR-VT.

HybridCSF model for magnetic resonance image based brain tumor segmentation

&lt;p&gt;The human brain comprises a complex interconnection of nerve cells and vital organs, which regulates crucial bodily processes. Although neurons commonly undergo developmental stages, they may occasionally experience abnormalities, leading to abnormal growths known as brain tumors. The objective of brain tumor segmentation is to produce precise boundaries of brain tumor regions. This study extensively analyzes deep learning methods for brain tumor detection, evaluating their effectiveness across diverse datasets. It introduces a hybrid model, which is proposed by the name HybriCSF: hybrid convolutional-SVM-fuzzy C-means model combining convolutional neural network (CNN) with the classifier support vector machine (SVM) and clustering technique fuzzy C-means (FCM). The proposed model was implemented on Br35H, BraTs 2020 and BraTs2021 datasets. The suggested model outperformed the existing methods by achieving 98.6% of accuracy on Br35H dataset and dice score of 0.63, 0.87, 0.81 on BraTs 2020 dataset for enhancing tumor (ET), whole tumor (WT), and tumor core (TC), respectively. The achieved dice scores on the BraTs 2021datasets are 0.89, 0.95, and 0.89 for ET, WT, and TC, respectively. The results show that the suggested model HybriCSF outperforms the other CNN-based models in terms of accuracy.&lt;/p&gt;

Scalable CNN-based classification of selective sweeps using derived allele frequencies.

Selective sweeps can successfully be distinguished from neutral genetic data using summary statistics and likelihood-based methods that analyze single nucleotide polymorphisms (SNPs). However, these methods are sensitive to confounding factors, such as severe population bottlenecks and old migration. By virtue of machine learning, and specifically convolutional neural networks (CNNs), new accurate classification models that are robust to confounding factors have been recently proposed. However, such methods are more computationally expensive than summary-statistic-based ones, yielding them impractical for processing large-scale genomic data. Moreover, SNP data are frequently preprocessed to improve classification accuracy, further exacerbating the long analysis times. To this end, we propose a 1D CNN-based model, dubbed FAST-NN, that does not require any preprocessing while using only derived allele frequencies instead of summary statistics or raw SNP data, thereby yielding a sample-size-invariant, scalable solution. We evaluated several data fusion approaches to account for the variance of the density of genetic diversity across genomic regions (a selective sweep signature), and performed an extensive neural architecture search based on a state-of-the-art reference network architecture (SweepNet). The resulting model, FAST-NN, outperforms the reference architecture by up to 12% inference accuracy over all challenging evolutionary scenarios with confounding factors that were evaluated. Moreover, FAST-NN is between 30× and 259× faster on a single CPU core, and between 2.0× and 6.2× faster on a GPU, when processing sample sizes between 128 and 1000 samples. Our work paves the way for the practical use of CNNs in large-scale selective sweep detection. https://github.com/SjoerdvandenBelt/FAST-NN.

Automated identification of building features with deep learning for risk analysis

Accurate and up-to-date information about the building stock is fundamental to better understand and mitigate the impact caused by catastrophic earthquakes, as seen recently in Turkey, Syria, Morocco and Afghanistan. Planning for such events is necessary to increase the resilience of the building stock and to minimize casualties and economic losses. Although in several parts of the world new constructions follow more strict compliance with modern seismic codes, a large proportion of existing building stock still demands a more detailed and automated vulnerability analysis. Hence, this paper proposes the use of computer vision deep learning models to automatically classify buildings and create large scale (city or region) exposure models. Such approach promotes the use of open databases covering most cities in the world (cf. OpenStreetMap, Google Street View, Bing Maps and satellite imagery), Therefore providing valuable geographical, topological and image data that may cheaply be used to extract valuable information to feed exposure models. Our previous work using deep learning models achieved, in line with the results from other projects, high classification accuracy concerning building materials and number of storeys. This paper extends the approach by: (i) implementing four CNN-based models to perform classification of three sets of different/extended buildings’ characteristics; (ii) training and comparing the performance of the four models for each of the sets; (iii) comparing the risk assessment results based on data extracted from the best CNN-based model against the results obtained with traditional ground data. In brief, the best accuracy obtained with the three tested sets of buildings’ characteristics is higher than 80%. Moreover, it is shown that the error resulting from using exposure models fed by automatic classification is not only acceptable, but also far outweighs the time and costs of obtaining a manual and specialised classification of building stocks. Finally, we recognize that automatic assessment of certain complex buildings’ characteristics compares to similar limitations of traditional assessments performed by specialized civil engineers, typically related with the identification of the number of storeys and the construction material. However, the identified limitations do not show worse results when compared against the use of manual buildings’ assessment.

A CNNbased energy management strategy for a Hybrid energy storage system in electric vehicles

When approaching a large-scale performance, the choice, size, and administration of an Energy Storage System (ESS) for an Electric Vehicle (EV) are crucial. As the peak-to-average power demand ratio is relatively large, particularly for an urban ride that is frequently marked by rapid deceleration as well as acceleration, the complementary characteristics of the battery and Ultra-Capacitor (UC)render this arrangement a viable Hybrid energy storage system (HESS) for EV. Enhanced dynamic responsiveness, increased miles per charge, and extended battery life provided by the HESS increase the Electric Vehicle (EV’s) effectiveness. The primary objective of the study that has been suggested is to create a smart Energy Management Strategy (EMS) for EVs. A battery package and a properly sized Ultra-Capacitor (UC) together give the required high power along with energy density. This research proposes a CNN-based power management technique to aid in efficient EMS. Additionally, by adjusting the Convolution Neural Network (CNN) classifier’s weights through Improved Honey Badger Optimization (IHBO), the adaptive approach of the Standard HBO Algorithm, the performance of the classifier is improved. In MATLAB, the suggested CNN-based model for BESS EM is simulated and experimental assessment and analysis are done in terms of converter current and battery SoC. By contrasting the suggested approach against several standardized models, the performance analysis of the proposed work is assessed to validate its performance.

Deep Convolutional Neural Network Model for the Differential Diagnosis of Schizophrenia Using EEG Signals

Objective: One of the serious mental disorders in which people interpret reality in an abnormal situation is schizophrenia. A combination of extremely disordered thoughts, delusions, and hallucinations occurs due to schizophrenia, and the person's daily functions are seriously impaired due to this disease. For general cognitive activity analysis, electroencephalography signals are widely used as a low-resolution diagnostic tool. This study aimed to diagnose schizophrenia using the transfer learning method by including the EEGs of 73 patients diagnosed with schizophrenia, and 67 patients from the healthy group. Material and Method: In the first step of the study, digital electroencephalography signal data was converted into spectrograms to make them usable. In the classification phase, ResNet18, ResNet50 and EfficientNet models, which are FastAI, and Convolutional Neural Network (CNN) based deep learning models, were used. Results: Despite the complexity of electroencephalography data, CNN-based models in the study were successful in capturing different aspects of neurophysiological activity. The best performance was obtained from the ResNet-50 model with an accuracy rate of 97%. Afterwards, the classification process was finalized with 95% ResNet-18, and 83% EfficientNet models, respectively. Conclusion: It is thought that the classification performance of the result obtained in the application is promising, and may be a guide for future studies.

Sub-national scale mapping of individual olive trees integrating Earth observation and deep learning

The olive tree holds great cultural, environmental, and economic significance in the Mediterranean region. In particular, Morocco has been making dedicated investments over $10 billion since 2008 to fuel the transition from cereal to olive production. Understanding the spatial extent of this large-scale land conversion is critical for a variety of socioeconomic purposes. In response to this demand, we conducted a study to map individual olive trees in northern Morocco using satellite imagery and deep learning techniques at a sub-national scale. This study utilized cloud-free, very-high-resolution DigitalGlobe imagery collected between 2018 and 2022 to identify each individual olive tree in six northern Morocco provinces. We compared various deep learning models, including both transformer-based and CNN-based models, to generate patch-level spatial constraints and pixel-level tree identification. We found that transformer-based models outperformed CNN-based models in both tasks. Additionally, spatially constraining the pixel-level results improved olive tree mapping accuracy to varying degrees, depending on the initial performance of the model. The evaluation of the olive map generated from this study shows high accuracy in both surveyed and unsampled regions. This research represents the first-of-its-kind individual olive tree mapping at the sub-national scale that can help monitor the large-scale land conversions such as about 110,000 ha of olive plantings in the six Moroccan provinces studies here. Meanwhile it demonstrates a cost-effective and efficient prototype approach that can be adapted to identify similar tree crop expansion occurring in other parts of the world.