Cluster Binding Site Research Articles

Diversity of 16S rRNA and dioxygenase genes detected in coal-tar-contaminated site undergoing active bioremediation

In order to develop effective bioremediation strategies for polyaromatic hydrocarbons (PAHs) degradation, the composition and metabolic potential of microbial communities need to be better understood, especially in highly PAH contaminated sites in which little information on the cultivation-independent communities is available. Coal-tar-contaminated soil was collected, which consisted of 122.5 mg g(-1) total extractable PAH compounds. Biodegradation studies with this soil indicated the presence of microbial community that is capable of degrading the model PAH compounds viz naphthalene, phenanthrene and pyrene at 50 ppm each. PCR clone libraries were established from the DNA of the coal-tar-contaminated soil, targeting the 16S rRNA to characterize (i) the microbial communities, (ii) partial gene fragment encoding the Rieske iron sulfur center (alpha-subunit) common to all PAH dioxygenase enzymes and (iii) beta-subunit of dioxygenase. Phylotypes related to Proteobacteria (Alpha-, Epsilon- and Gammaproteobacteria), Acidobacteria, Actinobacteria, Firmicutes, Gemmatimonadetes and Deinococci were detected in 16S rRNA derived clone libraries. Many of the gene fragment sequences of alpha-subunit and beta-subunit of dioxygenase obtained from the respective clone libraries fell into clades that are distinct from the reference dioxygenase gene sequences. Presence of consensus sequence of the Rieske type [2Fe-2S] cluster binding site suggested that these gene fragments encode for alpha-subunit of dioxygenase gene. Sequencing of the cloned libraries representing alpha-subunit gene fragments (Rf1) and beta-subunit of dioxygenase showed the presence of hitherto unidentified dioxygenase in coal-tar-contaminated soil. The combination of the Rieske primers and bacterial community profiling represents a powerful tool for both assessing bioremediation potential and the exploration of novel dioxygenase genes in a contaminated environment.

Crystal Structure of the L Protein of Rhodobacter sphaeroides Light-Independent Protochlorophyllide Reductase with MgADP Bound: A Homologue of the Nitrogenase Fe Protein

The L protein (BchL) of the dark-operative protochlorophyllide reductase (DPOR) from Rhodobacter sphaeroides has been purified from an Azotobacter vinelandii expression system; its interaction with nucleotides has been examined, and the X-ray structure of the protein has been determined with bound MgADP to 1.6 A resolution. DPOR catalyzes the reduction of protochlorophyllide to chlorophyllide, a reaction critical to the biosynthesis of bacteriochlorophylls. The DPOR holoenzyme is comprised of two component proteins, the dimeric BchL protein and the heterotetrameric BchN/BchB protein. The DPOR component proteins share significant overall similarities with the nitrogenase Fe protein (NifH) and the MoFe (NifDK) protein, the enzyme system responsible for reduction of dinitrogen to ammonia. Here, BchL was expressed in A. vinelandii and purified to homogeneity using an engineered polyhistidine tag. The purified, recombinant BchL was found to contain 3.6 mol of Fe/mol of BchL homodimer, consistent with the presence of a [4Fe-4S] cluster and analogous to the [4Fe-4S] cluster present in the Fe protein. The MgATP- and MgADP-induced conformational changes in BchL were examined by an Fe chelation assay and found to be distinctly different from the nucleotide-stimulated Fe release observed for the Fe protein. The recombinant BchL was crystallized with bound MgADP, and the structure was determined to 1.6 A resolution. BchL is found to share overall structural similarity with the nitrogenase Fe protein, including the subunit bridging [4Fe-4S] cluster and nucleotide binding sites. Despite the high level of structural similarity, however, BchL is found to be incapable of substituting for the Fe protein in a nitrogenase substrate reduction assay. The newly determined structure of BchL and its comparison to its close homologue, the nitrogenase Fe protein, provide the basis for understanding how these highly related proteins can discriminate between their respective functions in microbial systems where each must function simultaneously.

Novel aromatic ring-hydroxylating dioxygenase genes from coastal marine sediments of Patagonia

BackgroundPolycyclic aromatic hydrocarbons (PAHs), widespread pollutants in the marine environment, can produce adverse effects in marine organisms and can be transferred to humans through seafood. Our knowledge of PAH-degrading bacterial populations in the marine environment is still very limited, and mainly originates from studies of cultured bacteria. In this work, genes coding catabolic enzymes from PAH-biodegradation pathways were characterized in coastal sediments of Patagonia with different levels of PAH contamination.ResultsGenes encoding for the catalytic alpha subunit of aromatic ring-hydroxylating dioxygenases (ARHDs) were amplified from intertidal sediment samples using two different primer sets. Products were cloned and screened by restriction fragment length polymorphism analysis. Clones representing each restriction pattern were selected in each library for sequencing. A total of 500 clones were screened in 9 gene libraries, and 193 clones were sequenced. Libraries contained one to five different ARHD gene types, and this number was correlated with the number of PAHs found in the samples above the quantification limit (r = 0.834, p < 0.05). Overall, eight different ARHD gene types were detected in the sediments. In five of them, their deduced amino acid sequences formed deeply rooted branches with previously described ARHD peptide sequences, exhibiting less than 70% identity to them. They contain consensus sequences of the Rieske type [2Fe-2S] cluster binding site, suggesting that these gene fragments encode for ARHDs. On the other hand, three gene types were closely related to previously described ARHDs: archetypical nahAc-like genes, phnAc-like genes as identified in Alcaligenes faecalis AFK2, and phnA1-like genes from marine PAH-degraders from the genus Cycloclasticus.ConclusionThese results show the presence of hitherto unidentified ARHD genes in this sub-Antarctic marine environment exposed to anthropogenic contamination. This information can be used to study the geographical distribution and ecological significance of bacterial populations carrying these genes, and to design molecular assays to monitor the progress and effectiveness of remediation technologies.

Structural investigations of the ferredoxin and terminal oxygenase components of the biphenyl 2,3-dioxygenase from Sphingobium yanoikuyae B1

BackgroundThe initial step involved in oxidative hydroxylation of monoaromatic and polyaromatic compounds by the microorganism Sphingobium yanoikuyae strain B1 (B1), previously known as Sphingomonas yanoikuyae strain B1 and Beijerinckia sp. strain B1, is performed by a set of multiple terminal Rieske non-heme iron oxygenases. These enzymes share a single electron donor system consisting of a reductase and a ferredoxin (BPDO-FB1). One of the terminal Rieske oxygenases, biphenyl 2,3-dioxygenase (BPDO-OB1), is responsible for B1's ability to dihydroxylate large aromatic compounds, such as chrysene and benzo[a]pyrene.ResultsIn this study, crystal structures of BPDO-OB1 in both native and biphenyl bound forms are described. Sequence and structural comparisons to other Rieske oxygenases show this enzyme to be most similar, with 43.5 % sequence identity, to naphthalene dioxygenase from Pseudomonas sp. strain NCIB 9816-4. While structurally similar to naphthalene 1,2-dioxygenase, the active site entrance is significantly larger than the entrance for naphthalene 1,2-dioxygenase. Differences in active site residues also allow the binding of large aromatic substrates. There are no major structural changes observed upon binding of the substrate. BPDO-FB1 has large sequence identity to other bacterial Rieske ferredoxins whose structures are known and demonstrates a high structural homology; however, differences in side chain composition and conformation around the Rieske cluster binding site are noted.ConclusionThis is the first structure of a Rieske oxygenase that oxidizes substrates with five aromatic rings to be reported. This ability to catalyze the oxidation of larger substrates is a result of both a larger entrance to the active site as well as the ability of the active site to accommodate larger substrates. While the biphenyl ferredoxin is structurally similar to other Rieske ferredoxins, there are distinct changes in the amino acids near the iron-sulfur cluster. Because this ferredoxin is used by multiple oxygenases present in the B1 organism, this ferredoxin-oxygenase system provides the structural platform to dissect the balance between promiscuity and selectivity in protein-protein electron transport systems.

A tale of two ferredoxins: sequence similarity and structural differences

BackgroundSequence similarity between proteins is usually considered a reliable indicator of homology. Pyruvate-ferredoxin oxidoreductase and quinol-fumarate reductase contain ferredoxin domains that bind [Fe-S] clusters and are involved in electron transport. Profile-based methods for sequence comparison, such as PSI-BLAST and HMMer, suggest statistically significant similarity between these domains.ResultsThe sequence similarity between these ferredoxin domains resides in the area of the [Fe-S] cluster-binding sites. Although overall folds of these ferredoxins bear no obvious similarity, the regions of sequence similarity display a remarkable local structural similarity. These short regions with pronounced sequence motifs are incorporated in completely different structural environments. In pyruvate-ferredoxin oxidoreductase (bacterial ferredoxin), the hydrophobic core of the domain is completed by two β-hairpins, whereas in quinol-fumarate reductase (α-helical ferredoxin), the cluster-binding motifs are part of a larger all-α-helical globin-like fold core.ConclusionFunctionally meaningful sequence similarity may sometimes be reflected only in local structural similarity, but not in global fold similarity. If detected and used naively, such similarities may lead to incorrect fold predictions.

Characterization of the Iron-Sulfur Cluster N7 (N1c) in the Subunit NuoG of the Proton-translocating NADH-quinone Oxidoreductase from Escherichia coli

The proton-pumping NADH-quinone oxidoreductase from Escherichia coli houses nine iron-sulfur clusters, eight of which are found in its mitochondrial counterpart, complex I. The extra putative iron-sulfur cluster binding site with a CXXCXXXCX(27)C motif in the NuoG subunit has been assigned to ligate a [2Fe-2S] (N1c). However, we have shown previously that the Thermus thermophilus N1c fragment containing this motif ligates a [4Fe-4S] (Nakamaru-Ogiso, E., Yano, T., Ohnishi, T., and Yagi, T. (2002) J. Biol. Chem. 277, 1680-1688). In the current study, we individually inactivated four sets of the iron-sulfur binding motifs in the E. coli NuoG subunit by replacing all four ligands with Ala. Each mutant subunit, designated Delta N1b, Delta N1c, Delta N4, and Delta N5, was expressed as maltose-binding protein fusion proteins. After in vitro reconstitution, all mutant subunits were characterized by EPR. Although EPR signals from cluster N1b were not detected in any preparations, we detected two [4Fe-4S] EPR signals with g values of g(x,y,z) = 1.89, 1.94, and 2.06, and g(x,y,z) = 1.91, 1.94, and 2.05 at 6-20 K in wild type, Delta N1b, and Delta N5. The former signal was assigned to cluster N4, and the latter signal was assigned to cluster N1c because of their disappearance in Delta N4 and Delta N1c. Confirming that a [4Fe-4S] cluster ligates to the N1c motif, we propose to replace its misleading [2Fe-2S] name, N1c, with "cluster N7." In addition, because these mutations differently affected the assembly of peripheral subunits by in trans complementation analysis with the nuoG knock-out strain, the implicated structural importance of the iron-sulfur binding domains is discussed.

A Narf-like gene from Cryptosporidium parvum resembles homologues observed in aerobic protists and higher eukaryotes

Here we report a Narf-like gene from the apicomplexan Cryptosporidium parvum ( CpNARF). CpNARF is an intronless, single-copy gene of 1680 bp which encodes a putative protein of 560 amino acids with a calculated molecular mass of 63.1 kDa. This gene contains a single highly conserved N-terminal iron–sulfur cluster ([4Fe–4S]) binding site, as well as most of the H-cluster conserved residues. Reverse transcription polymerase chain reaction analysis indicates that CpNARF is expressed by the intracellular stages of C. parvum. Although the function of this gene is as yet unknown, phylogenetic analyses suggest that CpNARF belongs to the group of NARF-like proteins from aerobic protists and higher eukaryotes, which are thought to have had an ancestor in common with [Fe]-hydrogenases.

A conserved histidine in vertebrate-type ferredoxins is critical for redox-dependent dynamics.

Adrenodoxin (Adx) belongs to the family of Cys(4)Fe(2)S(2) vertebrate-type ferredoxins that shuttle electrons from NAD(P)H-dependent reductases to cytochrome P450 enzymes. The vertebrate-type ferredoxins contain a conserved basic residue, usually a histidine, adjacent to the third cysteine ligand of the Cys(4)Fe(2)S(2) cluster. In bovine Adx the side chain of this residue, His 56, is involved in a hydrogen-bonding network within the domain of Adx that interacts with redox partners. It has been proposed that this network acts as a mechanical link between the metal cluster binding site and the interaction domain, transmitting redox-dependent conformational or dynamical changes from the cluster binding loop to the interaction domain. H/D exchange studies indicate that oxidized Adx (Adx(o)) is more dynamic than reduced Adx (Adx(r)) on the kilosecond time scale in many regions of the protein, including the interaction domain. Dynamical differences on picosecond to nanosecond time scales between the oxidized (Adx(o)) and reduced (Adx(r)) adrenodoxin were probed by measurement of (15)N relaxation parameters. Significant differences between (15)N R(2) rates were observed for all residues that could be measured, with those rates being faster in Adx(o) than in Adx(r). Two mutations of His 56, H56R and H56Q, were also characterized. No systematic redox-dependent differences between (15)N R(2) rates or H/D exchange rates were observed in either mutant, indicating that His 56 is required for the redox-dependent behavior observed in WT Adx. Comparison of chemical shift differences between oxidized and reduced H56Q and H56R Adx confirms that redox-dependent changes are smaller in these mutants than in the wild-type Adx.

The Structure of the Soluble Domain of an Archaeal Rieske Iron–Sulfur Protein at 1.1 Å Resolution

The first crystal structure of an archaeal Rieske iron–sulfur protein, the soluble domain of Rieske iron–sulfur protein II (soxF) from the hyperthermo-acidophile Sulfolobus acidocaldarius, has been solved by multiple wavelength anomalous dispersion (MAD) and has been refined to 1.1 Å resolution. SoxF is a subunit of the terminal oxidase supercomplex SoxM in the plasma membrane of S. acidocaldarius that combines features of a cytochrome bc 1 complex and a cytochrome c oxidase. The [2Fe–2S] cluster of soxF is most likely the primary electron acceptor during the oxidation of caldariella quinone by the cytochrome a 587/Rieske subcomplex. The geometry of the [2Fe–2S] cluster and the structure of the cluster-binding site are almost identical in soxF and the Rieske proteins from eucaryal cytochrome bc 1 and b 6 f complexes, suggesting a strict conservation of the catalytic mechanism. The main domain of soxF and part of the cluster-binding domain, though structurally related, show a significantly divergent structure with respect to topology, non-covalent interactions and surface charges. The divergent structure of soxF reflects a different topology of the soxM complex compared to eucaryal bc complexes and the adaptation of the protein to the extreme ambient conditions on the outer membrane surface of a hyperthermo-acidophilic organism.

Modular organization and identification of a mononuclear iron-binding site within the NifU protein.

The NifS and NifU nitrogen fixation-specific gene products are required for the full activation of both the Fe-protein and MoFe-protein of nitrogenase from Azotobacter vinelandii. Because the two nitrogenase component proteins both require the assembly of [Fe-S]-containing clusters for their activation, it has been suggested that NifS and NifU could have complementary functions in the mobilization of sulfur and iron necessary for nitrogenase-specific [Fe-S] cluster assembly. The NifS protein has been shown to have cysteine desulfurase activity and can be used to supply sulfide for the in vitro catalytic formation of [Fe-S] clusters. The NifU protein was previously purified and shown to be a homodimer with a [2Fe-2S] cluster in each subunit. In the present work, primary sequence comparisons, amino acid substitution experiments, and optical and resonance Raman spectroscopic characterization of recombinantly produced NifU and NifU fragments are used to show that NifU has a modular structure. One module is contained in approximately the N-terminal third of NifU and is shown to provide a labile rubredoxin-like ferric-binding site. Cysteine residues Cys35, Cys62, and Cys106 are necessary for binding iron in the rubredoxin-like mode and visible extinction coefficients indicate that up to one ferric ion can be bound per NifU monomer. The second module is contained in approximately the C-terminal half of NifU and provides the [2Fe-2S] cluster-binding site. Cysteine residues Cys137, Cys139, Cys172, and Cys175 provide ligands to the [2Fe-2S] cluster. The cysteines involved in ligating the mononuclear Fe in the rubredoxin-like site and those that provide the [2Fe-2S] cluster ligands are all required for the full physiological function of NifU. The only two other cysteines contained within NifU, Cys272 and Cys275, are not necessary for iron binding at either site, nor are they required for the full physiological function of NifU. The results provide the basis for a model where iron bound in labile rubredoxin-like sites within NifU is used for [Fe-S] cluster formation. The [2Fe-2S] clusters contained within NifU are proposed to have a redox function involving the release of Fe from bacterioferritin and/or the release of Fe or an [Fe-S] cluster precursor from the rubredoxin-like binding site.

Two different respiratory Rieske proteins are expressed in the extreme thermoacidophilic crenarchaeon Sulfolobus acidocaldarius: cloning and sequencing of their genes

We have isolated two genes encoding Rieske iron sulfur proteins from the genomic DNA of the thermoacidophilic crenarchaeon Sulfolobus acidocaldarius (DSM 639). One of the genes, named soxL, codes for the previously isolated novel Rieske-I protein [1]. The second gene ( soxF) [2] codes for the Rieske-II protein associated with the second terminal oxidase of Sulfolobus [3]. Both proteins exhibit only 24% identical residues. The Rieske-I protein shows a number of unusual features. (i) The distance between the two cluster binding sites is significantly larger than in all known proteins. (ii) An unexpected Pro → Asp exchange in one of the cluster binding sites. (iii) It shows some resemblance to the mitochondrial and plastidic Rieske proteins insofar as the soxL gene codes for a pre-sequence which is no longer present in the mature Rieske-I protein. Both proteins cluster together on a separate branch of the phylogenetic tree. To our knowledge this is the first proven case of two significantly different Rieske proteins in a prokaryote.

Microbial hydrogenases: Primary structure, classification, signatures and phylogeny

Thirty sequenced microbial hydrogenases are classified into six classes according to sequence homologies, metal content and physiological function. The first class contains nine H 2-uptake membrane-bound NiFe-hydrogenases from eight aerobic, facultative anaerobic and anaerobic bacteria. The second comprises four periplasmic and two membrane-bound H 2 -uptake NiFe(Se)-hydrogenases from sulphate-reducing bacteria. The third consists of four periplasmic Fe-hydrogenases from strict anaerobic bacteria. The fourth contains eight methyl-viologen- (MV), factor F420- (F420) or NAD-reducing soluble hydrogenases from methanobacteria and Alcaligenes eutrophus H16. The fifth is the H 2-producing labile hydrogenase isoenzyme 3 of Escherichia coli. The sixth class contains two soluble tritium-exchange hydrogenases of cyanobacteria. The results of sequence comparison reveal that the 30 hydrogenases have evolved from at least three different ancestors. While those of class I, II, IV and V hydrogenases are homologous, i.e. sharing the same evolutionary origin, both class III and VI hydrogenases are neither related to each other nor to the other classes. Sequence comparison scores, hierarchical cluster structures and phylogenetic trees show that class II falls into two distinct clusters composed of NiFe- and NiFeSe-hydrogenases, respectively. These results also reveal that class IV comprises three distinct clusters: MV-reducing, F420-reducing and NAD-reducing hydrogenases. Specific signatures of the six classes of hydrogenases as well as some subclusters have been detected. Analyses of motif compositions indicate that all hydrogenases, except those of class VI, must contain some common motifs probably participating in the formation of hydrogen activation domains and electron transfer domains. The regions of hydrogen activation domains are highly conserved and can be divided into two categories. One corresponds to the ‘nickel active center’ of NiFe(Se)-hydrogenases. It consists of two possible specific nickel-binding motifs, RxCGxCxxxH and DPCxxCxxH, located at the N- and C-termini of so-called large subunits in the dimeric hydrogenases, respectively. The other is the H-cluster of the Fe-hydrogenases. It might comprise three motifs on the C-terminal half of the large subunits. However, the motifs corresponding to the putative electron transfer domains, as well as their polypeptides chains, are poorly or even not at all conserved. They are present essentially on the small subunits in NiFe-hydrogenases. Some of these motifs resemble the typical ferredoxin-like Fe-S cluster binding site. The variation of the sequences in these regions might determine the specific interaction between the external electron transfer domains of hydrogenases and their electron carriers. For example, the C-terminal cysteine-histidine rich region of the small subunits are distinguishable between those of H 2-uptake, H 2-producing, MV-reducing, F420-reducing and NAD-reducing NiFe(Se)-hydrogenases.

Microbial hydrogenases: primary structure, classification, signatures and phylogeny.

Thirty sequenced microbial hydrogenases are classified into six classes according to sequence homologies, metal content and physiological function. The first class contains nine H2-uptake membrane-bound NiFe-hydrogenases from eight aerobic, facultative anaerobic and anaerobic bacteria. The second comprises four periplasmic and two membrane-bound H2-uptake NiFe(Se)-hydrogenases from sulphate-reducing bacteria. The third consists of four periplasmic Fe-hydrogenases from strict anaerobic bacteria. The fourth contains eight methyl-viologen- (MV), factor F420- (F420) or NAD-reducing soluble hydrogenases from methanobacteria and Alcaligenes eutrophusH16. The fifth is the H2-producing labile hydrogenase isoenzyme 3 of Escherichia coli. The sixth class contains two soluble tritium-exchange hydrogenases of cyanobacteria. The results of sequence comparison reveal that the 30 hydrogenases have evolved from at least three different ancestors. While those of class I, II, IV and V hydrogenases are homologous, i.e. sharing the same evolutionary origin, both class III and VI hydrogenases are neither related to each other nor to the other classes. Sequence comparison scores, hierarchical cluster structures and phylogenetic trees show that class II falls into two distinct clusters composed of NiFe- and NiFeSe-hydrogenases, respectively. These results also reveal that class IV comprises three distinct clusters: MV-reducing, F420-reducing and NAD-reducing hydrogenases. Specific signatures of the six classes of hydrogenases as well as some subclusters have been detected. Analyses of motif compositions indicate that all hydrogenases, except those of class VI, must contain some common motifs probably participating in the formation of hydrogen activation domains and electron transfer domains. The regions of hydrogen activation domains are highly conserved and can be divided into two categories. One corresponds to the 'nickel active center' of NiFe(Se)-hydrogenases. It consists of two possible specific nickel-binding motifs, RxCGxCxxxH and DPCxxCxxH, located at the N- and C-termini of so-called large subunits in the dimeric hydrogenases, respectively. The other is the H-cluster of the Fe-hydrogenases. It might comprise three motifs on the C-terminal half of the large subunits. However, the motifs corresponding to the putative electron transfer domains, as well as their polypeptides chains, are poorly or even not at all conserved. They are present essentially on the small subunits in NiFe-hydrogenases. Some of these motifs resemble the typical ferredoxin-like Fe-S cluster binding site.(ABSTRACT TRUNCATED AT 400 WORDS)

Solvation effects on the molecular 3s Rydberg state: AZAB/CYCLO octanes clustered with argon

Two color, 1+1, mass resolved excitation spectroscopy (MRES) is used to obtain molecular Rydberg (3s←n) spectra of azabicyclo[2.2.2]octane (ABCO) and diazabicyclo[2.2.2]octane (DABCO) clustered with argon. Nozzle/laser timing delay studies are employed together with time-of-flight mass spectroscopy to identify cluster composition. Population depletion techniques are used to differentiate between clusters with the same mass, but different geometries. A Lennard-Jones 6–12 potential is used to model the intermolecular interactions and predict minimum energy cluster geometries and cluster binding energies. The experimental results are combined with the cluster geometry calculations to assign spectral features to specific cluster geometries. Three different excited state interactions are required to model the experimentally observed line shapes, spectral shifts, and cluster dissociation. The relationship between these model potentials and the cluster binding sites suggests that the form of the cluster intermolecular potential in the Rydberg excited state is dictated by the distance between the argon and chromophore atoms. A comparison of results for ABCO(Ar)1 and DABCO(Ar)1 leads to the conclusion that the nitrogen 3s Rydberg orbital in clusters of DABCO is delocalized.

The Interaction of Sodium Dodecylsulfate with (Hydroxypropyl)Cellulose

(Hydroxypropyl)cellulose (HPC) in aqueous solution interacts with sodium dodecylsulfate (SDS) to give micelle-like SDS clusters bound to the polymer at concentrations well below the critical micelle concentration of SDS itself. We have used the steady-state fluorescence quenching method (fluorophore: pyrene, quencher: benzophenone) to determine mean aggregation numbers (N̅, molecules of SDS per cluster) for the system. These N̅ values vary with both surfactant and HPC concentrations. The data are consistent with a constant number of cluster binding sites per polymer. These clusters increase in size as the ratio of SDS to HPC is increased. This behavior is very different from that described for the interaction of SDS with poly(ethylene oxide).

Chemistry of Isolated Transition Metal Clusters

Clusters containing two to several hundred atoms are generated by pulsed laser vaporization of a metal target located in a flow tube reactor. A continuous flow of inert carrier gas entrains and cools the vaporized plume of metal, resulting in rapid cluster growth. Reactant gases are injected into the flow downstream of the target, at a point where cluster growth has finished. After reagent mixing and chemical reactions occur, the products exit the tube into a vacuum, and are formed into a molecular beam by collimators located in successive stages of differential pumping. In the highest vacuum stage the reaction products are identified by pulsed laser ionization and time-of-flight mass spectrometry. Studies to be discussed include measurements of absolute reaction rate constants, hydrogen uptake experiments, laser-induced desorption of adsorbates from clusters, and cluster-catalyzed chemical reactions. Such work provides us with information about the dependence of reactivity on cluster size, the geometrical configuration of cluster binding sites, the thermodynamics of adsorbate bonding, and the mechanisms of chemical reactions of cluster surfaces. These studies are bringing us closer to a detailed understanding of the interactions of metal surfaces with atoms and simple molecules.