Cloud-Aerosol Lidar With Orthogonal Polarization Measurements Research Articles

Improvements in Shortwave Bulk Scattering and Absorption Models for the Remote Sensing of Ice Clouds

AbstractThis study summarizes recent improvements in the development of bulk scattering/absorption models at solar wavelengths. The approach combines microphysical measurements from various field campaigns with single-scattering properties for nine habits including droxtals, plates, solid/hollow columns, solid/hollow bullet rosettes, and several types of aggregates. Microphysical measurements are incorporated from a number of recent field campaigns in both the Northern and Southern Hemisphere. A set of 12 815 particle size distributions is used for which Tcld ≤ −40°C. The ice water content in the microphysical data spans six orders of magnitude. For evaluation, a library of ice-particle single-scattering properties is employed for 101 wavelengths between 0.4 and 2.24 μm. The library includes the full phase matrix as well as properties for smooth, moderately roughened, and severely roughened particles. Habit mixtures are developed for generalized cirrus, midlatitude cirrus, and deep tropical convection. The single-scattering properties are integrated over particle size and wavelength using an assumed habit mixture to develop bulk scattering and absorption properties. In comparison with global Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) data, models built with severely roughened particles compare best for all habit mixtures. The assumption of smooth particles provided the largest departure from CALIOP measurements. The use of roughened rather than smooth particles to infer optical thickness and effective diameter from satellite imagery such as the Moderate Resolution Imaging Spectroradiometer (MODIS) will result in a decrease in optical thickness and an increase in particle size.

Effective lidar ratios of dense dust layers over North Africa derived from the CALIOP measurements

Lidar ratio (i.e., extinction-to-backscatter ratio) is a key parameter required for retrieving extinction profiles and optical depths from elastic backscatter lidar measurements, and the quality of any extinction retrieval depends critically on the accuracy of the assumed or measured lidar ratio. In this study, we analyze the first two and a half years of the Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) data acquired during nighttime. Distributions of the effective lidar ratio (ELR), which is the product of the lidar ratio and an instrument-dependent multiple scattering factor, are derived for opaque dust layers observed by CALIOP over the North Africa. The median and mean ELR values are, respectively, 36.4 and 38.5 sr at 532 nm and 47.7 and 50.3 sr at 1064 nm. For these opaque dust layers, the derived ELR decreases as the volume depolarization ratio (VDR) increases, reflecting the impact of multiple scattering within the dense layers. The particulate depolarization ratio is typically ∼0.3 at 532 nm for African dust observed by CALIOP. This ratio can increase to ∼0.4 in the presence of significant multiple scattering. Correspondingly, the calculated ELR will decrease to ∼20 sr at 532 nm and to ∼30 sr at 1064 nm. The median and mean effective lidar ratio values approach, respectively, to 38 and 40 sr at 532 nm and 52 and 55 sr at 1064 nm for smaller VDR values measured in less dense layers where the multiple scattering is relatively insignificant. These values are very close to those derived in previous case studies for moderately dense dust. Case studies are also performed to examine the impacts of multiple scattering. The results obtained are generally consistent with Monte-Carlo simulations.

Lidar beams in opposite directions for quality assessment of Cloud-Aerosol Lidar with Orthogonal Polarization spaceborne measurements

We present the "lidar beams in opposite directions" (LIBOD) technique and applications for quality assessment of spaceborne observations made by Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation satellite. LIBOD is applicable to standard total backscatter lidar because it does not require a priori knowledge of the particle extinction-to-backscatter ratio. In this paper, we present (i) an objective assessment of the lidar signal quality and representativity of correlative ground-based lidar and CALIOP measurements only using normalized range-corrected lidar signals and (ii) a numerical filtering and optimization technique for reducing the spurious oscillations induced by noisy signal differentiation as needed for retrieval of particle extinction coefficients and extinction-to-backscatter ratio profiles. Numerical simulations and Monte Carlo tests are conducted for assessing the performance of the LIBOD technique. The applications are illustrated with examples of actual correlative 532 nm lidar profiles from CALIOP and a ground-based lidar deployed in Tamanrasset in the heart of Sahara in 2006 and near Strasbourg, France, in 2007.

CALIPSO Lidar Calibration Algorithms. Part I: Nighttime 532-nm Parallel Channel and 532-nm Perpendicular Channel

Abstract The Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission was launched in April 2006 and has continuously acquired collocated multisensor observations of the spatial and optical properties of clouds and aerosols in the earth’s atmosphere. The primary payload aboard CALIPSO is the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), which makes range-resolved measurements of elastic backscatter at 532 and 1064 nm and linear depolarization ratios at 532 nm. CALIOP measurements are important in reducing uncertainties that currently limit understanding of the global climate system, and it is essential that these measurements be accurately calibrated. This work describes the procedures used to calibrate the 532-nm measurements acquired during the nighttime portions of the CALIPSO orbits. Accurate nighttime calibration of the 532-nm parallel-channel data is fundamental to the success of the CALIOP measurement scheme, because the nighttime calibration is used to infer calibration across the day side of the orbits and all other channels are calibrated relative to the 532-nm parallel channel. The theoretical basis of the molecular normalization technique as applied to space-based lidar measurements is reviewed, and a comprehensive overview of the calibration algorithm implementation is provided. Also included is a description of a data filtering procedure that detects and removes spurious high-energy events that would otherwise introduce large errors into the calibration. Error estimates are derived and comparisons are made to validation data acquired by the NASA airborne high–spectral resolution lidar. Similar analyses are also presented for the 532-nm perpendicular-channel calibration technique.

Application of CALIOP Measurements to the Evaluation of Cloud Phase Derived from MODIS Infrared Channels

Abstract In this study, Moderate Resolution Imaging Spectroradiometer (MODIS) infrared-based cloud thermodynamic phase retrievals are evaluated using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) retrievals for the 6 months from January to June of 2008. The CALIOP 5-km cloud-layer product provides information on cloud opacity, cloud-top height, midlayer cloud temperature, and cloud thermodynamic phase. Comparisons are made between MODIS IR phase and CALIOP observations for single-layer clouds (54% of the cloudy CALIOP scenes) and for the top layer of the CALIOP scenes. Both CALIOP and MODIS retrieve larger fractions of water clouds in the single-layer cases than in the top-layer cases, demonstrating that focusing on only single-layer clouds may introduce a water-cloud bias. Of the single-layer clouds, 60% are transparent and 40% are opaque (defined by the lack of a CALIOP ground return). MODIS tends to classify single-layer clouds with midlayer temperatures below −40°C as ice; around −30°C nearly equally as ice, mixed, and unknown; between −28° and −15°C as mixed; and above 0°C as water. Ninety-five percent of the single-layer CALIOP clouds not detected by MODIS are transparent. Approximately ⅓ of transparent single-layer clouds with temperatures below −30°C are not detected by MODIS and close to another ⅓ are classified as ice, with the rest assigned as water, mixed, or unknown. CALIOP classes nearly all of these transparent cold clouds as ice.

Atmospheric correction of ocean color imagery over turbid coastal waters using active and passive remote sensing

This paper demonstrates an atmospheric correction method to process MODIS/Aqua (Moderate-resolution Imaging Spectroradiometer) ocean color imagery over turbid coastal waters with the aid of concurrent CALIOP (Cloud-Aerosol LIdar with Orthogonal Polarization) aerosol data, assuming that there exists “nonturbid” water in the study area where MODIS aerosol optical properties can be retrieved accurately. Aerosol properties from CALIOP measurements were obtained and related to those from MODIS. This relationship, combined with CALIOP aerosol data, was extended to turbid water to derive MODIS aerosol properties, where atmospheric correction using MODIS data alone often fails. By combining MODIS and CALIOP data, aerosol signals were separated from the total signals at the satellite level, and water-leaving radiances in turbid waters were subsequently derived. This method was tested on several MODIS/Aqua ocean color images over South China turbid waters. Comparison with field data shows that this method was effective in reducing the errors in the retrieved water-leaving radiance values to some extent. In the Zhujiang (Pearl) River Estuary, this method did not overestimate the aerosol effects as severely, and provided far fewer negative water-leaving radiance values than the NASA (National Aeronautics and Space Administration) default methods that used MODIS data alone.