Clay Loam Soil Research Articles

Understanding Environmental Fate: Soil Variability and Rainfall Influence on Triafamone and Ethoxysulfuron Leaching.

Considering the environmental impact of triafamone and ethoxysulfuron, it is crucial to investigate their leaching behaviour under different geographical conditions. The present study evaluates the effects of application rate, soil properties and rainfall conditions on leaching of these herbicides and their metabolites. Ethoxysulfuron leached up to 50-60cm with 82.95 to 89.23% detected in leachates while triafamone leached only to 10-20cm and was < 0.01µg mL-1 in leachates. Highest leachability was observed in loamy sand followed by sandy loam and clay loam soil. M1 metabolite (N-(2-((4,6-dimethoxy-1,3,5-triazin-2-yl) (hydroxy) methyl) -6-fluorophenyl) -1,1-difluoro-N-methyl methane sulfonamide) was majorly present in 0 to 10cm soil depth. With increase in rainfall, downward mobility of both parent and M1 increased. Amendment of loamy sand soil with farmyard manure reduced the leachability indicating it could mitigate groundwater pollution. However, the effect of different exogenous OM amendments on leaching behaviour of herbicides needs to be evaluated.

The effects of herbicide application on the properties of agricultural soil in Algeria

Phytosanitary products, particularly herbicides, are essential for weed control in agriculture. This study examined the concentration and persistence of Pinoxaden residues in different soil textures. Seventy-two soil samples from two farms in Tiaret, Algeria, were analyzed using liquid chromatography (HPLC) to measure herbicide residues. The analysis used a mobile phase of acetonitrile and methanol (50/50, V/V) with a retention time of 2 minutes. Results indicated significant differences in residue persistence based on soil texture. Clay-loam soils showed higher residue persistence, averaging 6.01 × 10^-4 ± 8.7 × 10^-5 μg/g, while sandy soils had lower persistence, averaging 6.4 × 10^-5 ± 5.9 × 10^-6 μg/g. This underscores the impact of soil characteristics on herbicide behavior and the need for tailored management strategies. Despite herbicides' benefits, their environmental impacts are concerning. Persistent residues can contaminate soil and harm ecosystems. Raising awareness among stakeholders about these risks is essential. The study recommends sustainable alternatives, such as biological control methods, to reduce dependency on chemical herbicides. Biological controls offer eco-friendly solutions, promoting ecosystem balance and reducing agriculture's ecological footprint. Implementing crop rotation and other integrated pest management (IPM) strategies can enhance weed control effectiveness while decreasing reliance on chemical herbicides. These practices mitigate environmental risks and improve soil health and agricultural productivity. In conclusion, while herbicides are indispensable in modern agriculture, responsible use and management are crucial for environmental sustainability and the long-term viability of agricultural systems. By adopting sustainable practices and innovative technologies, it is possible to balance agricultural productivity with environmental protection.

Assessing critical plant sulfur concentration and nitrogen to sulfur ratio in spring canola production

AbstractAimsPlant S concentration (Sc) and nitrogen (N) to S ratio (N:S) in canola are important indicators for diagnosing S deficiency. A field study was conducted on sandy and clay loam soils at two sites in eastern Canada for three growing seasons to determine plant critical Sc and N:S ratios across various growth stages (GSs).MethodsFor each site year, factorial experiments consisting of combinations of four N levels (0, 80, 160, and 240 kg N ha–1) as urea (46–0–0) and four S levels (0, 20, 30, and 40 kg S ha–1) as potassium sulfate (0–0–50–18) were classified orthogonally to form 16 combinations. Muriate of potash (0–0–60) was also applied as needed to ensure all plots receiving the equal amount of potassium (K).ResultsOur study found that S fertilization increased plant Sc at each GS but reduced the whole‐plant N:S ratio, and the effect was stronger during the flowering stage. Both whole‐plant Sc and N:S ratios varied with GS, environment, and soil type and declined with plant aging. Our results showed that whole‐plant S analysis combined with visual signs of plant S deficiency (purple‐edged and cup‐shaped leaves with less green; stunted growth, slow blooming, and fewer flowers) appeared to be the best way to identify S problems in the field, and whole‐plant Sc and N:S ratios could confirm S deficiencies.ConclusionOur findings indicated that if the whole‐plant Sc in the rosette stage is &lt;0.35% and the N:S ratio is &gt;9.6, the plant may be S‐deficient, and timely supplementary S fertilization measures may be beneficial to canola crop yield.

Survival of Twelve Pathogenic and Generic Escherichia coli Strains in Agricultural Soils as Influenced by Strain, Soil Type, Irrigation Regimen, and Soil Amendment

Biological soil amendments of animal origin (BSAAO) play an important role in agriculture but can introduce pathogens into soils. Pathogen survival in soil is widely studied, but data are needed on the impacts of strain variability and field management practices. This study monitored the population of 12 Escherichia coli strains (generic, O157, and non-O157) in soils while evaluating the interactions of soil type, irrigation regimen, and soil amendment in three independent, greenhouse-based, randomized complete block design trials. Each E. coli strain (4–5 log10 CFU/g) was homogenized in bovine manure amended or nonamended sandy-loam or clay-loam soil. E. coli was enumerated in 25 g samples on 0, 0.167 (4 h), 1, 2, 4, 7, 10, 14, 21, 28, 56, 84, 112, 168, 210, 252, and 336 days postinoculation (dpi). Regression analyses were developed to understand the impact of strain, soil type, irrigation regimen, and soil amendment on inactivation rates. E. coli survived for 112 to 336 dpi depending on the treatment combination. Pathogenic and generic E. coli survived 46 days [95% Confidence interval (CI) = 20.85, 64.72; p = 0.001] longer in soils irrigated weekly compared to daily and 146 days (CI = 114.50, 184.50; p < 0.001) longer in amended soils compared to unamended soils. Pathogenic E. coli strains were nondetectable 69 days (CI = 39.58, 98.66, p = 0.015) earlier than generic E. coli strains. E. coli inactivation rates demonstrated a tri-phasic pattern, with breakpoints at 26 dpi (CI = 22.3, 29.2) and 130 dpi (CI = 121.0, 138.1). The study findings demonstrate that using bovine manure as BSAAO in soil enhances E. coli survival, regardless of strain, and adequate food safety practices are needed to reduce the risk of crop contamination. The findings of this study contribute data on E. coli concentrations in amended soils to assist stakeholders and regulators in making risk-based decisions on time intervals between the application of BSAAO and the production and harvest of fruits and vegetables.

Evaluation of effects of earthworm density and species on the permeability of clay loam soils for managing stormwater in urban systems

Evaluation of effects of earthworm density and species on the permeability of clay loam soils for managing stormwater in urban systems

Impact of Crop Bio-Intensification and Nutrient Management on Production and Productivity of Maize Crop under North West Himalayan Region of Jammu -Kashmir

A field experiment was conducted during for two years (2015 and 2016) at the Research Farm, FSR center, Main Campus, Chatha of SKUAST–Jammu, during rabi, zayad and kharif seasons on clay loam soil to study the effect of crop bio-intensification and nutrient management on productivity and sustainability of various cropping. The experiment was laid out in Factorial Randomized Block Design with three replications. Under different treatments (crop bio-intensification and nutrient management) the grain yield, straw yield and total bio-mass (q/ha) of maize was found varying. The grain yield, straw yield and total bio-mass of maize was observed more in second year kharif 2015 than first year kharif 2016. Among crop bio-intensification, maize crop sown under Lentil (BB) + Mustard (B) – Summer Moongbean –Maize (BB) + Sorghum (F) practice produced higher grain yield ( 30.16 q/ha and 31.50 q/ha ) than the crop sown under wheat + mustard (6:1) –Summer moongbean – maize (bed) + Cowpea (B) (26.03 q/ha and 26.78 q/ha ) during both of the years of experimentations. The same trend was observed with straw yield and total bio-mass. Among nutrient management, application of 100% in- organic showed higher grain yield, straw yield and total bio-mass than 100% organic (FYM) and INM (50:50) during 1st and 2nd years of experimentations.

Optimization of Foliar Nutrition and Nipping for Quality of Pigeonpea [Cajanus cajan (L). Millsp.

A field experiment was conducted in red sandy clay loam soil at UAS, GKVK, Bengaluru during kharif to know the influence of foliar nutrition and nipping on crop growth, seed yield and quality in pigeonpea. The experiment replicated six times in split plot design with treatments of foliar spray of water soluble fertilizer (WSF)with three different concentration F0 (100% RDF), F1 (75% RDF + 25% WSF (19: 19:19), F2 (75% RDF + 12.5% WSF (19: 19:19) in combination with nipping (N1) and no nipping (N0). The results revealed that seed quality parameters viz.,germination (85.75 %) mean seedling length (48.28 cm), mean seedling dry weight (47.33 mg), seedling vigour index-I (4137), seedling vigour index -II (4112), lower electrical conductivity (1.07 mS ppt-1), total dehydrogenase activity (3.30 A480nm) and total soluble protein (23.19%) recorded higher in F2N1 (75% RDF + 12.5% WSF (19: 19:19) + nipping) over control (81.42%, 44.59 cm, 41.67 mg seedling-1, 3724, 3346, 1.44 mS ppt-1, 2.22 A480nm, 20.22 %,) respectively.

Impact of Stress Induced by Unfavorable Soil Conditions on the Germination, Seedling Developmentand Stress Tolerance Indices of Browntop Millet (Brachiaria ramosa L.)

Background: Browntop millet, a traditionally cultivated yet underutilized millet, is abundant in iron, zincand fiber. It can thrive in diverse soils and climates, adapting well to a broad spectrum of ecological conditions. Assessing the performance of Brown top millet in various challenging soils prevalent across Tamil Nadu could provide valuable insights into its adaptability and potential for cultivation in different soil conditions. The evaluation focuses on its germination, seedling growthand stress tolerance indices in these diverse soil environments. Methods: The pot experiment was carried out in the Department of Agronomy, Tamil Nadu Agricultural University, Coimbatore during Kharif 2023 season. Six soil types were collected from different zones in Tamil Nadu and tested in a completely randomized design with four replications. Germination, seedling growth and stress tolerance indices were calculated by using standard formula. Result: Results of the investigation revealed that the treatment with sandy clay loam soils of Eastern Block 37B TNAU, Coimbatore (T1) recorded higher germination and seedling growth indices. The lowest values were recorded with the sodic soils of ADAC and RI, Trichy (T6). The higher stress tolerance indices were recorded with the heavy clay soils of Cotton Research Station (CRS), Veppanthattai, Perambalur district (T2)and acidic soils of Anaikatti, Coimbatore district (T3).

Evaluation and comparison of infiltration models for estimating infiltration capacity of different textures of irrigated soils

Accurate estimation of infiltration rates is crucial for effective irrigation system design and evaluation by optimizing irrigation scheduling, preventing soil erosion, and enhancing water use efficiency. This study evaluates and compares selected infiltration models for estimating water infiltration rates in the Shillanat-iv irrigation scheme in northern Ethiopia. Soil samples were collected to determine textural classes using hydrometer soil texture analysis and the United States Department of Agriculture (USDA) textural triangle. The soil textural map of the study was created using the inverse distance weight interpolation technique in ArcGIS version 10.4. Infiltration rates were measured using the double-ring infiltrometer for five soil textures: clay loam, loam, sandy clay loam, clay, and sandy loam. Six infiltration models (Kostiakov, Modified Kostiakov, Revised Modified Kostiakov, Philip, Horton, and Novel) were employed and evaluated using statistical parameters. Model calibration and validation were conducted using data from 38 points within the study area. The parameter values of the infiltration models were optimized using SPSS statistical software using least-squares errors. The results showed that, Revised Modified Kostiakov, Modified Kostiakov, and Novel infiltration models demonstrated superior capability in estimating infiltration rates for clay loam, loam, and sandy loam soil textures, respectively. Horton's model outperformed other models in estimating infiltration rates for both sandy clay loam and clay soil textures. The appropriately fitted infiltration models can be utilized in designing the irrigation system to estimate the infiltration rate of soil textures within the selected irrigation scheme and at similar sites with comparable soil textures.

Design and Fabrication of an Autonomous Rice Transplanter

The goal of this study was to create a prototype of an automatically guided rice transplanter using a Pixhauk flight controller, 3DR telemetry, Raspberry Pi, Tof sensor, gyro sensor, and other GPS navigation sensors to determine the field performance of that machine. GPS was used to obtain data such as location, direction, and speed, whereas machine vision can provide a navigation line. The next position of the transplanter can be determined using feature points extracted from the navigation line. The controller area network bus complies with the actuator control command and data communication protocols. Electrical actuators control steering and transmission based on a vehicle's location in a field. The percentage of missing, buried, and floating hills was observed to be 1.6%, 1.4%, and 3.0%, respectively, as the maximum values were found in clay soil at T1. Over time, percentages of losses decreased, and the lowest percentage of losses was given. The lowest percentage of missing, buried, and floating hills was found at 0.8%, 0.2%, and 0.8%, respectively, in clay loam soil at T5. Planting efficiency improved, and losses decreased as treatment levels upgraded. Clay loam soil in T5 had the highest planting efficiency percentage (88%), whereas clay soil in T1 had the lowest (61%) proportion. The findings indicated that T4 and T5 enhanced rice output by decreasing the losses incurred during seedling transplantation. The study suggested that the developed rice transplanter might be suitable for planting rice seedlings to establish meaningful mechanization through precision agriculture technology.

Effect of agricultural management system (“cash crop”, “livestock” and “climate optimized”) on nitrous oxide and ammonia emissions

AbstractThe study aimed to measure soil-atmosphere N2O fluxes and their controlling factors, as well as NH3 emissions and yields for two soils (silt loam and clay loam) in three management systems over two years under subsequent wheat and maize cultivation. The management systems were characterized as follows: (1) cash crop (C) with mineral fertilizer and conventional tillage; (2) livestock (L) with biogas residue fertilization and its incorporation prior to sowing in maize and reduced tillage; and (3) climate optimized (O) with minimum tillage, 8-year crop rotation, with biogas residue fertilization, in maize without incorporation in clay loam soil or incorporation by strip-tillage prior to seeding in silt loam soil. Stable isotope ratios of N2O and mineral N were determined to identify N2O processes. Within the organically fertilized maize treatments, cumulative N2O fluxes were highest in the O-system treatments of both sites (4.0 to 9.4 kg N ha− 1 a− 1), i.e. more than twice as high as in the L-system (1.5 to 3.1 kg N ha− 1 a− 1). Below root-strip till fertilizer application did not enhance N2O fluxes. Fluxes with mineral fertilization of wheat (1.1 to 3.1 kg N ha− 1 a− 1) were not different from those with organic fertilization. Isotopic values of emitted N2O revealed that bacterial denitrification dominated most of the peak flux events, while the N2O/(N2 + N2O) ratio of denitrification was mostly between 0.1 and 0.5. It can be concluded that, contrary to the intention to lower greenhouse gas fluxes by the O-system management, the highest N2O fluxes occurred in the O-system without biogas digestate incorporation in maize. With respect to NH3 fluxes, we could confirm that the application of digestate application in growing crops without incorporation or late incorporation in fertilization before sowing induces high fluxes. The beneficial aspects of the O-system including more stable soil structure and resource conservation, are thus potentially counteracted by increased N2O and NH3 emissions.

Optimizing application of dairy effluent with synthetic N fertilizer reduced nitrogen leaching in clay loam soil

High application rates of dairy effluent and manure are often associated with nitrogen (N) leaching, which can affect groundwater quality. Here, we used a lysimeter to examine N leaching losses and biomass yield following application of dairy effluent and manure under wheat-maize cropping. The field experiment included seven treatments: no N fertilizer (Control); 200/300 kg N ha−1 synthetic N fertilizer only (wheat/maize) (CN); 100/150 kg N ha−1 synthetic N fertilizer plus 100/150 (DE1), 150/200 (DE2) and 250/350 (DE3) kg N ha−1 dairy effluent; 100/150 kg N ha−1 synthetic fertilizer plus 100/150 kg N ha−1 dairy manure (SM1); and 150/225 kg N ha−1 synthetic fertilizer plus 50/75 kg N ha−1 dairy manure (SM2). Compared with CN, DE1 treatment increased maize yield by 10.0 %, wheat N use efficiency (NUE) by 26.5 %, and wheat and maize N uptake by 7.7–16.3 %, while reduced N leaching by 22.4 % in wheat season and by 40.4 % in the maize season. In contrast, DE2 and DE3 treatment increased N leaching by 27.2–241 % and reduced NUE by 26.2–55.2 %. SM2 treatment increased yield and NUE by 8.8 % and 7.8 %, respectively, and reduced N leaching by 42.9 % during the wheat but not the maize season. Annual N leaching losses were 37.6 kg N ha−1 under CN treatment, but decreased to 27.4 kg N ha−1 under DE1. In contrast, N leaching increased to 52.8 and 84.1 kg N ha−1 under DE2 and DE3 treatment, respectively (P < 0.05). Meanwhile, under SM1 and SM2 treatment, N leaching decreased by 71.2 % and 32.0 %, respectively, compared with CN. These results suggest that replacing 50 % and 25 % synthetic N fertilizer with dairy farm effluent and manure could reduce N leaching losses but had varied effects on crop productivity under wheat-maize cropping.

Unveiling the salinity tolerance potential of Armenian Dandur (Portulaca oleracea L.) genotypes: Enhancing sustainable agriculture and food security

This study examines the adaptation of an undocumented halophyte, Dandur, to salt stress in different soil mediums. The Dandur plant physiological, morphological, and biochemical analyses show that it can withstand salinity stress. Dandur plants grown in clay and clay loam soil experienced significant decreases in height and stem diameter under extreme salinity conditions compared to non-saline soil. The fresh weight of root and shoot decreased by 70.4% and 84.8%, respectively, and dry weight by 48.5% and 79.7%. These findings underscore the importance of maintaining saline soil conditions for plant growth. Dandur unique ability to avoid dehydration and maintain growth traits, particularly in clay soil, holds promise for further exploration in agricultural research and food security-related issues caused by climate change in saline areas of Armenia and other European countries.

Calculating the Total Costs of the Tractor and the Chisel Plow under Variable Speeds and Depth of Tillage

Factorial experiments were conducted in a silt clay loam soil with a randomized complete block design with three replications for each treatment. This study aimed to calculate machinery unit costs and some indicators during primary tillage, under variable tractor speeds of 1.8, 3.5 and 5.7 km.h-1 and depth of plowing 20, 30 and 40 cm. A higher speed of 5.7 km.h-1 is associated with higher practical productivity of 0.9696 ha.h-1; specific productivity of tillage 4309 m.h-1; a volume of soil disturbed 2884 m3. h-1. The best fixed, management, total tractor, total plow and total machinery unit costs were 2.27, 0.80, 9.02,1.01 and 10.04 $.ha-1 respectively. Additionally, lower fuel consumption was 8.56 l.ha-1, and the actual time for plowing one hectare was 1.02 h. The depth of tillage 20 cm recorded a higher productivity of 0.6412 ha.h-1, the specific productivity of tillage was 2849 m.h-1, less fuel consumption of 7.74 l.ha-1, less actual time of plowing one hectare of 1.95 hThe least fixed, variable, management, total tractor, total plow and total machinery unit costs were 4.32, 4.71, 0.89, 9.94,1.94 and 11.89 $.ha-1 respectively. All interactions among the treatments were significant. The experiment concluded that the plowing depth has a greater effect than speed on all operating costs of the tractor and chisel plow and performance indicators. The correlations among the indicators studied were direct (positive) and inverse (negative) significantly and were also non-significant.

Selenium Nanoparticles Boost the Drought Stress Response of Soybean by Enhancing Pigment Accumulation, Oxidative Stress Management and Ultrastructural Integrity

Drought is a persistent and devastating obstacle to crop production, affecting both humanity and livestock. The application of selenium (Se) effectively mitigates various types of abiotic stresses and enhances crop yield under unfavorable conditions. However, our understanding of how nano-Se (nSe) alleviates drought stress (DS) in soybeans is still limited. To address this gap, our study focused on assessing the effectiveness of foliar nSe application during the reproductive stage of soybeans. Three concentrations of nSe were applied to plants grown in pots filled with clay loam soil, simulating DS conditions. Our findings reveal that nSe spraying significantly promoted the accumulation of above-ground dry biomass and enhanced relative water content (RWC) and photosynthetic pigment over alone-DS treatment. Furthermore, nSe application boosted the activity and contents of protective enzymes and osmolytes, resulting in a dose-dependent reduction in electrolyte leakage (EL), reactive oxygen species (ROS) accumulation, and malondialdehyde (MDA) content. Additionally, nSe improved stomatal characteristics and mesophyll cell ultrastructure, further mitigating the adverse effects of drought stress. These findings suggest the potential of nSe as an effective strategy to enhance soybean tolerance and potentially improve crop yields under drought conditions.

Application of different organic amendments influences the different forms of sulphur in the soil of pea – onion – cauliflower cropping system

A study was conducted in sandy clay loam soils in a subtropical zone of Bihar to evaluate the effect of frequent application of organic amendments on sulphur fractions. Different organic amendments, including farmyard manure (FYM), vermicompost, azotobacter, phosphate solubilizing bacteria (PSB), panchagawya, and neem cake, were applied through nine treatments that resulted in a significant increase of water-soluble S, available S, heat-soluble S, adsorbed S, and organic S in organic treatment compared to the recommended dose of fertilizer (RDF) and control treatment. The maximum increment was observed in the treatment where the recommended dose of nitrogen was replaced by 75% recommended dose of nitrogen substituted farmyard manure + 25% recommended dose of nitrogen (vermicompost) along with azotobacter + PSB + one foliar spray of panchagawya. The total S content varied widely from 382 to 736 mg kg-1. Increment in all the forms of sulphur is observed as a result of the application of different organic nutrient sources. All the forms of sulphur share a mutual positive and significant correlation with each other. Regression analysis suggested that the availability of sulphur was dominated by organic sulphur, which alone can explain 97.8% of the variation in availability of available sulphur in soil.

Performance of kharif maize under conservation tillage in silty clay loam soil

Maize is a major staple food as well as potential cash crop for millions of people, mostly grown in the winter season in Bangladesh under conventional tillage practice. But huge area of cultivable land remains fallow in kharif-1 season in Sylhet region as well as other parts of Bangladesh. Hence, we aimed to identify the best variety and tillage method to grow maize in silty clay loam soil in kharif season. An experiment was conducted to study the performance of six maize varieties in the Kharif-I season (summer) under three tillage methods in silty clay loam soil of Eastern Surma-Kushiyara floodplain (AEZ-20). The experiment was arranged in RCBD with three replications to observe yield contributing traits and yield performance of maize. Among the varieties, BARI Hybrid Maize-16 showed the highest yield attributes and grain yield followed by BARI Hybrid Maize-13 and BARI Hybrid Maize-9. Based on tillage, the maximum number of leaves per plant, cob length and diameter, kernel rows per cob, kernels per row, kernels per cob, highest grain yield, and stover yields were recorded in conventional tillage. Therefore, considering the yield and tillage methods, BARI Hybrid Maize-16 showed the best yield performance under conventional tillage in the kharif-I season in silty clay loam soil of Eastern Surma-Kushiyara floodplain of Bangladesh.

Effect of Nutrient Management on Physico-chemical Properties of Soil in Indian Mustard

A field experiment was conducted at the IFS Unit Instructional Farm of Banda University of Agriculture &amp; Technology, Banda (UP) during the winter (rabi) seasons of 2022-23 and 2023-24. The study aimed to examine the impact of nutrient management on the soil properties of Indian mustard (Brassica juncea L.) grown in clay loam soil. Mustard, an essential oilseed crop in India, encounters issues like low productivity and diminished soil fertility caused by excessive use of chemical fertilizers. The paper highlights the importance of integrating chemical and organic sources, such as vermicompost. Vermicompost enriched with biofertilizers, especially Azotobacter, PSB, PMB, NPK Consortia, and ZSB demonstrates significant potential in improving the soil conditions for mustard crops. The experiment utilized a split plot design (SPD) with four main factors in the main plot and four levels in the sub-plot, resulting in sixteen treatment combinations, each applied three times. The soil at the experimental site was characterized by a clay loam texture and low levels of organic carbon, available nitrogen, phosphorus, zinc and sulfur, with moderate levels of available potash. The main plot treatments consisted of different fertility levels: 50% RNPKS, 75% RNPKS, 100% RNPKS and 125% RNPKS. Each main plot was further divided into four sub-plots, each with a combination of micronutrients and enriched vermicompost. The results indicated that the treatment of either 125% or 100% RNPKS and 2.5 kg Zn + 0.5 kg B + 500 kg enriched vermicompost ha-1 was superior in improving the soil properties for Indian mustard.

Development of spoke structure for agricultural non-pneumatic tire based on the decrease in soil compaction

Pneumatic tires are unsuitable for agricultural machinery due to their susceptibility to punctures from stumps in plantations. To address this, non-pneumatic tires (NPTs) were developed. This study experimented with and simulated the Michelin TWEEL NPT on sandy clay loam soil. An integrated method combining the finite element method and an empirical model was used to simulate NPT-soil compaction. A custom tire-soil compaction machine measured soil sinkage, aligning well with the experimental data. A novel arrow-shaped spoke for agricultural NPTs, made from polyurethane, significantly reduced soil compaction. Future work will involve prototyping and manufacturing this innovative agricultural NPT.

Influence of drip Fertigation on Maize Growth Parameters

Field experiment was conducted during kharif 2018, rabi 2018-19 and kharif 2019 at Dr. NTR College of Agricultural Engineering, Bapatla, Andhra Pradesh to study the influence of drip fertigation on maize growth parameters. The experiment was laid out in split plot design consisting of three irrigation levels (0.6 ETc (I1), 0.8 ETc (I2) and 1.0 ETc (I3)) and four nitrogen levels consisting of fertigation levels (80% RDN (N1), 100% RDN (N2), 120% RDN (N3) and Manual application (N4) on sandy clay loam soil. A drip fertigation system with venturi assembly was designed and fertigation date and quantity of nitrogen in each fertigation were calculated and applied. The results shown that, in all the seasons, the plant height at all the stages of observation, drip fertigation at 120% RDN (N3) recorded tallest plant height followed by N2, N4 and N1. The lowest days for maturity was observed in I1 treatment followed by I2 and I3 during kharif 2018. During rabi 2018-19, the lowest days for maturity was observed in I1 treatment followed by I2 and I3. During kharif 2019, the lowest days for maturity was observed in I1 treatment followed by I2 and I3.