Classical Direct Torque Control Research Articles

Enhanced inverter switching for fast response direct torque control [of induction motor drives

In classical direct torque control (DTC), an inverter switching event can occur once in each control update period. Because the nature of the inverter switching event is unconstrained, it is essential to limit the inverter switching frequency, and hence the control update period, to ensure that under no circumstances is the allowable switching frequency of any individual power device exceeded. Consequently the switching capability of individual power devices is generally under-utilized, and the control scheme produces high levels of ripple in the motor current and torque. This paper describes a new strategy for device switching and voltage vector selection in DTC. The basis of the strategy is an increase in the control update frequency, while limiting the switching rate of each inverter leg. Although the rate at which device switching events may occur is unchanged, the higher control update frequency leads to higher resolution timing of switching events. The advantages of the strategy, demonstrated by experimental results on a 3 kW induction motor drive, are a significant reduction in the steady-state torque ripple as well as a faster transient response.

A modified direct torque control for induction motor sensorless drive

Direct torque control (DTC) is known to produce quick and robust response in AC drives. However, during steady state, notable torque, flux and current pulsations occur. They are reflected in speed estimation, speed response, and also in increased acoustical noise. This paper introduces a new direct torque and flux control based on space-vector modulation (DTC-SVM) for induction motor sensorless drives. It is able to reduce the acoustical noise, the torque, flux, current, and speed pulsations during steady state. The DTC transient merits are preserved, while better quality steady-state performance is produced in sensorless implementation for a wide speed range. The flux and torque estimator is presented and an improved voltage-current model speed observer is introduced. The proposed control topologies, simulations, implementation data, and test results with DTC and DTC-SVM are given and discussed. It is concluded that the proposed control topology produces better results for steady-state operation than the classical DTC.