Circular Polarization Characteristics Research Articles

Design of a miniaturized dual circularly polarized implantable antenna by using characteristic mode method

The characteristic mode method is used to design a miniaturized dual-band dual circularly polarized (CP) implantable antenna operating in ISM bands. The miniaturization and dual-band characteristics are gained by using the slotting method and by inserting a short-circuit probe between the radiation patch and the ground plane. We use the characteristic mode method to study the current distribution of circular radiation patches with T-shaped slots in different modes. After opening a cross-shaped slot at the center of the radiation patch and the ground plane, we obtained two orthogonal modes with equal amplitude and phase difference of 90° in two operating frequency bands, ultimately achieving CP characteristics of the antenna. Its overall size is only π\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\pi$$\\end{document}×(0.014 λ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\uplambda$$\\end{document}0)2 × 0.0027 λ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\uplambda$$\\end{document}0, smaller than other CP implantable antennas with similar performances, and it has satisfactory radiation efficiency and gain characteristics. Measurements show that it can operate in the ISM bands of 0.9 and 2.4 GHz with an effective 3 dB axial ratio bandwidth greater than 220 MHz (0.87 to 1.09 GHz, 22.45%) and 230 MHz (2.31 to 2.54 GHz, 9.48%), and its peak gain is − 29.5 dBi and − 19.2 dBi, respectively. And, this design complies with IEEE safety guidelines.

A compact dielectric resonator antenna with wideband circular polarization characteristics for C and X‐band applications

AbstractA wideband circularly polarized (CP) stacked rectangular dielectric resonator antenna (RDRA) is proposed in this article. The 3 dB axial ratio (AR) and 10 dB impedance bandwidth overlap of more than 66% is obtained. For increased bandwidth, the antenna comprises two dielectric resonators separated by an air gap. The upper dielectric layer is rotated at relative to the lower layer to obtain orthogonal modes for CP Both layers have dielectric constant . The rotation aids excitation of orthogonal modes , and in RDRA. The higher‐order modes generate left‐hand circular polarization at frequencies 6.75, 7.8, and 10.7 GHz, respectively. The upper layer consists of three holes giving a 10 dB impedance bandwidth of 66.7% from 6.52 to 11.02 GHz. The CP gain of 8.7, 6.8, and 6.4 dBi for 6.75, 7.8, and 10.7 GHz, respectively, is measured. The conformal orthogonal feeds enable a 72 3 dB AR bandwidth across the entire frequency band. The radiation efficiency is observed above 89 in the entire band (6.5–11 GHz). This work demonstrates a 66.7 overlap of 10 dB impedance and 3 dB AR bandwidth along with high gain in a single design which is suitable for 5G applications in C‐band as well as other X‐band applications.

Circularly polarized beam-scanning antenna with eliminated open-stopband

In the paper, a circularly polarized (CP) frequency beam-scanning antenna based on photonic crystal (PC) is proposed, which possesses the characteristics of eliminating open-stopband (OSB). In the microwave field, the PC is typically constructed by embedding the air or metal column into the material. However, it is difficult for the PC with perfect magnetic conductor walls to accomplish the degeneracy of eigenmodes at the Γ point. Additionally, antennas based on the PC with perfect electric conductor walls exhibit a narrow scanning angle. The proposed unit based on 1D PC possesses perfect electric and magnetic conductor walls. The unit can not only eliminate OSB but also has a wide scanning range. In addition, the unit breaks into the original symmetrical field distributions of 1D PC. Based on the perturbation theory, leaky-wave slots can be designed to generate electromagnetic waves with the CP characteristics. And a CP antenna based on the unit is designed. The antenna can achieve a 70° beam-scanning within the entire operating band (7.6–9.2 GHz), and the variation of the realized gains is below 1.0 dBi around the broadside frequency. Simultaneously, the antenna is fabricated and measured. The measured results are in accordance with the simulation, which validates the success of the design.

Designing a Dual-Feed Circular Polarization Antenna

This paper describes a novel dual-feed circularly polarized antenna, and the dual feeding mode is realized by grooving on the antenna radiator. The antenna utilizes air dielectric material to meet the requirements of low weight and cost. Test results demonstrate that the antenna exhibits capacitive loading between the metal antenna patch and the ground floor, allowing for adjustment of the working frequency of the dual-feed circularly polarized microstrip antenna. Specifically, the original center frequency of 2.264 GHz was reduced to 1.582 GHz, facilitating antenna miniaturization and broad bandwidth. With a return loss (S11) below -10 dB, a bandwidth of 72 MHz (1.552-1.624 GHz) was obtained. Additionally, the dual-feed microstrip antenna incorporates a 90° bridge, resulting in circular polarization gains of 2.26 dBi at 1.561 GHz and 2.45 dBi at 1.575 GHz. Overall, the antenna design offers a large working bandwidth and excellent circular polarization characteristics, making it suitable for a wide range of applications in satellite navigation and positioning terminals.

Metasurface-based dual-sense circularly polarized antenna for MIMO/full-duplex applications.

This paper introduces a two-element antenna array with dual-sense circular polarization, wideband operation, and high isolation characteristics. The antenna consists of two conventional truncated corner patches and an extra layer of metasurface (MS) located above the radiating patches. The overall dimensions of the proposed antenna are 0.92 λ0 × 0.73 λ0 × 0.05 λ0 and the element spacings are 0.02 λ0 and 0.39 λ0 with respect to edge-to-edge and center-to-center spacings. For validation, measurements on a fabricated antenna prototype are carried out. The measured data demonstrate that the presented MS-based antenna has a wide operating bandwidth of 14.5% with high isolation of better than 26 dB. The excellent performance could be concluded from the results of the investigation, which indicates that the proposed MS-based antenna could be a good candidate for multiple-input multiple-output (MIMO) and full-duplex applications.

Circular polarization characterization analysis: A case study of the scaled model of the ship and water body

Addressing the inadequate analysis of circular polarization characteristics, this study constructs a laboratory detection system. Utilizing the ship model against the water body background, this study focuses on analyzing the circular polarization characteristics and proposes a quantitative algorithm for analyzing circular polarization contrast. Results indicate that the circular polarization of the target increases in the forward scattering and decreases in the backward scattering region as the zenith angle of observation increases. The band characteristics of circular polarization in the water body are evident, with the peak located in the specular reflection zone. In contrast, the values in the backward scattering region exhibit reduced variability. Quantitative analysis of circular polarization contrast reveals peak values exceeding 0.7, which can effectively separate the target from the water body information. This paper provides critical insights for utilizing circular polarization data and establishes a theoretical foundation for target detection by incorporating comprehensive polarization information.

Metasurface loaded ceramic based MIMO antenna with improved gain and circular polarization characteristics

In this communication, the conceptualization involves the design of a multiple input multiple output (MIMO) (dual-port) ring dielectric resonator antenna and the integration of a meta-surface onto this configuration. It introduces three distinctive attributes, which characterize the novelty of the proposed design: (a) facilitates the conversion of linearly polarized waves into circularly polarized counterparts; (b) contributes to a substantial enhancement in gain in between the working band; and (c) there is notable improvement in the isolation between the antenna ports to more than 25 dB. The experimental measurements validate the simulated results of proposed design and confirms its applicability in between 2.45–3.0 GHz. Notably, a 3-dB axial ratio is created in the frequency span of 2.56–2.99 GHz, along with an impressive gain of approximately 8.3 dBi. Its consistent radiation pattern and excellent diversity performance make it suitable for WiMAX (2.6 GHz) use.

Spin angular momentum-encoded single-photon emitters in a chiral nanoparticle-coupled WSe2 monolayer.

Spin angular momentum (SAM)-encoded single-photon emitters, also known as circularly polarized single photons, are basic building blocks for the advancement of chiral quantum optics and cryptography. Despite substantial efforts such as coupling quantum emitters to grating-like optical metasurfaces and applying intense magnetic fields, it remains challenging to generate circularly polarized single photons from a subwavelength-scale nanostructure in the absence of a magnetic field. Here, we demonstrate single-photon emitters encoded with SAM in a strained WSe2 monolayer coupled with chiral plasmonic gold nanoparticles. Single-photon emissions were observed at the nanoparticle position, exhibiting photon antibunching behavior with a g(2)(0) value of ~0.3 and circular polarization properties with a slight preference for left-circular polarization. Specifically, the measured Stokes parameters confirmed strong circular polarization characteristics, in contrast to emitters coupled with achiral gold nanocubes. Therefore, this work provides potential insights to make SAM-encoded single-photon emitters and understand the interaction of plasmonic dipoles and single photons, facilitating the development of chiral quantum optics.

Stub Asymmetry-Enabled Self-Phase-Shift Circularly Polarized Antenna under Dual-Mode Resonance

In this article, a novel design approach to wideband dual-mode resonant circularly polarized (CP) antenna is advanced. An analytical design approach with low complexity as supported by a set of closed-form formulas is presented. Thus, the wideband dual-mode CP characteristics can be forward predicted and simply realized by incorporating stub asymmetry-enabled self-phase-shift dipoles and unequal feeding branches. At first, stubs are employed to broaden the impedance bandwidth by simultaneously exciting dual resonant modes. Then, the phase quadrature and equal magnitude conditions for wideband CP can be automatically realized by incorporating unequal Y-shaped microstrip branches and asymmetric slotline stubs. Finally, the coincidence between the simulated and measured results of the fabricated prototype antenna further confirms the feasibility of the design approach. It is shown that the presented antenna can exhibit an impedance bandwidth of 20.1% and a 3 dB axial ratio bandwidth of 16.3% in the boresight direction.

Slots and stubs incorporated annular ring-shaped compact microstrip antenna with circular polarization characteristics for wireless UWB communication systems

A circularly polarized (CP) antenna with ultra-wideband resonance and a broad axial ratio bandwidth is designed for UWB communication systems. The prescribed design comprises of a modified annular ring-shaped radiator and a modified step-graded slots loaded partial ground plane. The projected antenna is prototyped on FR4 substrate of 35 × 30 × 1.6 mm3. To achieve wide axial ratio bandwidth, a rectangular vertical slot is inserted into the radiating patch and two stubs are embedded into the monopole ground plane, which is configured with step graded rectangular slots. The simulation results are verified by testing the fabricated protype. The proposed design operates at UWB spectrum with an ultra-wide impedance bandwidth (IBW) of 134.57%, centered at 10.7 GHz, covering 3.5 GHz to 17.9 GHz frequency spectrum. Furthermore, it demonstrates circular polarization characteristics with a broad axial ratio bandwidth (ARBW) of 96.29% expanding from 3.5–10 GHz (6500 MHz). Its peak gain reaches to 8.7 dBi and a maximum radiation efficiency of 95% is achieved within the operating band. The results (measured and simulated) obtained in terms of S11, axial ratio, gain and efficiency and radiation patterns exhibit high agreement. The presented antenna could be a suitable choice for 5.5 GHz Worldwide Interoperability for Microwave Access (Wi-Max), 5.2/5.8 GHz Wireless local area network (WLAN), X-band satellite communication (downlink: 7.25–7.745 GHz, uplink: 7.9–8.4 GHz), UWB communication systems, and other applications in microwave C, X, Ku bands due to its superior characteristics.

A Novel Dual-Band Circularly Polarized Wearable Antenna.

A circularly polarized wearable antenna operating in the 2.45/5.8 GHz ISM dual bands is proposed, which consists of a coplanar waveguide-fed rectangular monopole antenna and two parasitic branches. The monopole rectangular radiation patch can generate 2.45 and 7 GHz frequency bands and has linear polarization characteristics. By adding L-shaped parasitic branches and L-like grounded branches on both sides of the monopole, the 7 GHz operating frequency band can be moved to the 5.8 GHz frequency band, and circular polarization characteristics can be achieved in both the 2.45 and 5.8 GHz frequency bands. The size of the antenna is 48.7 mm × 42.1 mm × 1.016 mm. The simulated -10 dB impedance bandwidths of the antenna are 1.8-2.66 GHz and 5.48-6.98 GHz, respectively. The 3 dB axial ratio bandwidths are 2.34-2.67 GHz and 5.58-6.39 GHz, respectively, and it has dual-band circular polarization characteristics. In addition, the radiation characteristics of the antenna and its safety performance near the human body were analyzed. The antenna prototype has been constructed, and the measurement and simulation results have good consistency. The proposed antenna is suitable for application in wearable devices.

Circularly polarized implantable MIMO antenna for skin, brain and heart implantation with wide axial ratio bandwidth

SummaryA unique MIMO antenna with circular polarization characteristics that works similarly for skin, brain and heart phantoms has been proposed in this paper. The twin rectangular X‐shaped slot that serves as the basic structure of the proposed antenna is entirely planar and low‐profile but has a defective ground plane. For three different phantoms, the proposed antenna resonates at 2.4–2.45 GHz ISM band. With a dimension of , the antenna exhibits compactness. Rogers RT/duroid 6010 substrate material has been used to fabricate the antenna in order to validate the designed antenna structure. Utilizing the high dielectric material for both substrate and superstrate, both skin‐mimicking gel and minced hog meat were employed in the experiment setup at 2.45 GHz ISM band. At ISM band, −28.3 dBi has been observed has realized peak gain. The obtained fractional bandwidth (FBW) and Axial Ratio Bandwidth (ARBW) values are 30.67% and 45%, respectively. Also, the maximum specific absorption rate (SAR) values are found to be in the acceptable limit regulated by IEEE.

Design of a Circularly Polarized Planar Monopole Antenna with a Simplified Radiator Structure for UWB Applications

The demand for wideband circularly polarized (CP) antennas in wireless communication applications has been increasing, given that it offers reliable signals with reduced interference. In particular, planar monopole antennas are a popular choice for use in CP applications due to their compact size and ease of integration. However, achieving CP characteristics often requires complex modifications, an increased antenna size, and design complexity. To address these challenges, this study proposes a simplified radiator structure modification for CP planar monopole antennas and validates the performance of the proposed antenna for ultra-wideband (UWB) applications by conducting both frequency-domain and time-domain analyses. The size of the proposed antenna is 34 mm × 41 mm × 1.6 mm, with FR-4 as the substrate. Both the -10 dB <i>S</i><sub>11</sub> bandwidth and 6 dB axial ratio axial ratio is 3.46–5.5 GHz, with the radiation patterns in the frequency range of interest being omni-directional. The proposed UWB CP antenna also yields decent antenna performance in time-domain analyses, such as the antenna fidelity factor and the system fidelity factor.

Dual-port tunable graphene–silicon ceramic-based hybrid filtering antenna with circular polarization characteristics in THz regime

Dual-port tunable graphene–silicon ceramic-based hybrid filtering antenna with circular polarization characteristics in THz regime

Tri-Band Circularly Polarized Annular Slot Antenna for GPS and CNSS Applications

A single-feed tri-band circularly polarized (CP) annular slot antenna is presented. The antenna structure is composed of two non-concentric annular slots that are fed by an L-shaped series step impedance microstrip line configuration. The proposed antenna is designed to operate at the L1 & L2 bands of the Global Positioning System (GPS) and the frequency band of the Compass Navigation Satellite System (CNSS). The measured results show that the impedance bandwidths are good for all bands. And the radiation patterns with good CP characteristics are obtained at the three resonant frequencies.

Miniaturized circularly polarized metasurface antenna based on characteristic mode analysis

AbstractA miniaturized circularly polarized (CP) metasurface (MTS) antenna is investigated based on characteristic mode theory (CMT). The 4 × 4 square patch structure was used as the initial structure for characteristic mode analysis (CMA) and improvement using CMT to guide the evolution of antenna structures. The square ring is bent and the capacitive strips are introduced to obtain the final miniaturized MTS. Comparing the proposed MTS with traditional MTS, the proposed antenna size is significantly reduced. To give the proposed antenna a CP, a feeding structure with a 90° phase difference is designed to excite a pair of orthogonal target patterns. The final antenna structure has a reduced overall size and has circular polarization characteristics. For verification, the proposed CP MTS antenna is fabricated and measured. The measured results show an impedance bandwidth of 2.9–3.65 GHz and 3 dB axial ratio bandwidth of 3.1–3.57 GHz, and a stable gain in the operating frequency band.

Fractal Cross-Slot-Coupled Antenna with Dielectric Resonator Elements having Circular Polarization

This article presents the design and analysis of an “ultra-wideband (UWB)” Fractal Cross-slot-Coupled Antenna with “Dielectric Resonator Elements (DREs)” exhibiting circular polarization and band-notched characteristics. The proposed antenna aims to reject the frequency range of 5.1 GHz to 5.9 GHz while maintaining high impedance bandwidth and radiation efficiency. A coplanar waveguide feeds the planar UWB antenna, featuring a narrow slot on the radiating element and a dielectric resonator mounted on top. Simulation results demonstrate excellent performance in terms of impedance bandwidth and radiation efficiency. To further improve the design for wireless applications, Fractal-slot-aperture coupled DRE antennas are employed. The proposed configuration takes into account the radiative efficiency and concomitant excitation of the rectangular DRE by a “Circularly Polarized Dielectric Resonator Antenna (CPDRA)” coupled through a fractal cross-slot. By appropriately adjusting the fractal cross-slot size, a wider “axial ratio (AR)” bandwidth is achieved through the combination of its resonance with the dielectric resonator. The antenna is designed utilizing the proposed fractal cross-slot-coupled CPDRA, with its architecture and efficiencies thoroughly investigated. The performance of the proposed antenna demonstrates its potential for various wireless communication applications, highlighting the advantages of integrating Fractal Cross-slot-coupled DREs in antenna design.

A Four Slot Dual Feed and Dual Band Reconfigurable Antenna for Fixed Satellite Service Applications

A dual feed and dual-band reconfigurable antenna is designed, analyzed, and prototyped in this work for fixed satellite service communication applications. The designed model occupies the compact dimension of 24X21X1.2 mm on FR4 substrate and provides an input impedance of 50 ohms at both ports. The proposed model offers additional circular polarization characteristics at both the resonating bands. The PIN diode-based switching conditions, and the frequency reconfigurability analysis in both simulation and measurement are almost match. The combination of dual-band resonance, frequency reconfigurable nature, and compact dimension makes this model an attractive candidate in the specified field with considerable gain (8.5 dB) and efficiency (80%).

A Compact Wideband Printed 4 × 4 MIMO Antenna with High Gain and Circular Polarization Characteristics for mm-wave 5G NR n260 Applications

A Compact Wideband Printed 4 × 4 MIMO Antenna with High Gain and Circular Polarization Characteristics for mm-wave 5G NR n260 Applications

Wideband circularly polarized SIW cavity‐backed patches antenna for wide‐angle scanning phased arrays

AbstractA single‐feed wideband circularly polarized (CP) substrate‐integrated waveguide (SIW) cavity‐backed antenna and its phased array are presented in this paper. The proposed element consists of SIW cavity, stacked patches, and a 50‐Ω coaxial probe. The coaxial pin is directly connected to the two patch radiators. By chamfering on each rectangular patch, the proposed SIW cavity‐backed patch antenna realizes wideband circular polarization characteristic. The proposed element exhibits a simulated impedance bandwidth of 22.5% (14–17.6 GHz) for |S11| < −10 dB, an axial‐ratio (AR) bandwidth of 12.9% (14.5–16.5 GHz) for AR ≤ 3 dB. Simulation results illustrate that the infinite array can scanning up to ±60° in all planes over the operating frequency, under the criterion of active VSWR ≤ 3 and AR ≤ 3 dB. For verification purpose, an 8 × 8 array prototype was manufactured and measured. To achieve better CP characteristics, the sequential rotation technique is applied to the full array configuration. The measured results show good agreement with simulation results.