Chloroplast Genome Research Articles

Extraction and analysis of high-quality chloroplast DNA with reduced nuclear DNA for medicinal plants

BackgroundObtaining high-quality chloroplast genome sequences requires chloroplast DNA (cpDNA) samples that meet the sequencing requirements. The quality of extracted cpDNA directly impacts the efficiency and accuracy of sequencing analysis. Currently, there are no reported methods for extracting cpDNA from Erigeron breviscapus. Therefore, we developed a suitable method for extracting cpDNA from E. breviscapus and further verified its applicability to other medicinal plants.ResultsWe conducted a comparative analysis of chloroplast isolation and cpDNA extraction using modified high-salt low-pH method, the high-salt method, and the NaOH low-salt method, respectively. Subsequently, the number of cpDNA copies relative to the nuclear DNA (nDNA ) was quantified via qPCR. As anticipated, chloroplasts isolated from E. breviscapus using the modified high-salt low-pH method exhibited intact structures with minimal cell debris. Moreover, the concentration, purity, and quality of E. breviscapus cpDNA extracted through this method surpassed those obtained from the other two methods. Furthermore, qPCR analysis confirmed that the modified high-salt low-pH method effectively minimized nDNA contamination in the extracted cpDNA. We then applied the developed modified high-salt low-pH method to other medicinal plant species, including Mentha haplocalyx, Taraxacum mongolicum, and Portulaca oleracea. The resultant effect on chloroplast isolation and cpDNA extraction further validated the generalizability and efficacy of this method across different plant species.ConclusionsThe modified high-salt low-pH method represents a reliable approach for obtaining high-quality cpDNA from E. breviscapus. Its universal applicability establishes a solid foundation for chloroplast genome sequencing and analysis of this species. Moreover, it serves as a benchmark for developing similar methods to extract chloroplast genomes from other medicinal plants.

Sequence characteristics, genetic diversity and phylogenetic analysis of the Cucurbita ficifolia (Cucurbitaceae) chloroplasts genome.

Curcubita ficifolia Bouché (Cucurbitaceae) has high value as a food crop and medicinal plant, and also has horticultural value as rootstock for other melon species. China is home to many different cultivars, but the genetic diversity of these resources and the evolutionary relationships among them, as well as the differences between C. ficifolia and other Cucurbita species, remain unclear. We investigated the chloroplast (cp) genomes of 160 C. ficifolia individuals from 31 populations in Yunnan, a major C. ficifolia production area in China. We found that the cp genome of C. ficifolia is ~151kb and contains 128 genes, of which 86 are protein coding genes, 34 encode tRNA, and eight encode rRNAs. We also identified 64 SSRs, mainly AT repeats. The cp genome was found to contain a total of 204 SNP and 57 indels, and a total of 21 haplotypes were found in the 160 study individuals. The reverse repeat (IR) region of C. ficifolia contained a few differences compared with this region in the six other Cucurbita species. Sequence difference analysis demonstrated that most of the variable regions were concentrated in the single copy (SC) region. Moreover, the sequences of the coding regions were found to be more similar among species than those of the non-coding regions. The phylogenies reconstructed from the cp genomes of 61 representative species of Cucurbitaceae reflected the currently accepted classification, in which C. ficifolia is sister to the other Cucurbita species, however, different interspecific relationships were found between Cucurbita species. These results will be valuable in the classification of C. ficifolia genetic resources and will contribute to our understanding of evolutionary relationships within the genus Cucurbita.

Futuristic opportunities for pretreatment processes in biofuel production from microalgae

AbstractMicroalgal biofuel is a promising solution to replace fossil fuel as a renewable and environmental‐friendly energy source, thereby contributing to the United Nations (UN) Sustainable Development Goals (SDGs), in particular SDG‐7, or Affordable and Clean Energy. Unlike energy crops (like oil palm and sugar cane), microalgae benefit from faster growth rate, higher lipid content, smaller land area required, ability to flourish using waste or brackish water, and posing zero competition with food crops. Microalgae‐derived biofuels (like biodiesel, bioethanol, biomethane, and biohydrogen) are sustainable energy sources that can be produced using well‐developed techniques (e.g., transesterification, fermentation, anaerobic digestion, and Fisher–Tropsch process). To prevent dire climate conditions resulting from the global temperature rise of 1.5°C and resolve worldwide energy security issue, our generation will need to establish and implement renewables on a global scale. To improve the industrial production of microalgal biofuel, the efficiencies of biomass and metabolite production to post‐cultivation biofuel synthesis processes must be enhanced. For the cultivation step, there exist three key techniques that can directly change the traits, structure, and behavior of microalgal cells, and induce them to accumulate targeted metabolites rapidly and in large amounts. These techniques are genetic engineering, chemical modulation, and nanomaterial approach. Genetic engineering commonly alters the chloroplast DNA of microalgae to overexpress or down‐regulate key genes in various metabolic pathways so that the cells accumulate more lipids. Chemicals can also be used to modulate microalgal growth and lipid accumulation by inducing oxidative stress or prevent conversion of lipid molecules. Nanomaterials and nanoparticles can also enhance microalgal lipid production by microenvironmental stress induction, vitamin supplementation, and light backscattering. Therefore, in this review, the recent progress as well as the pros and cons of genetic engineering, chemical modulation, and nanomaterial approach in achieving greater biofuel production from microalgae are comprehensively examined.

Comparative analysis of chloroplast genomes of Pulsatilla species reveals evolutionary and taxonomic status of newly discovered endangered species Pulsatilla saxatilis.

Pulsatilla saxatilis, a new species of the genus Pulsatilla has been discovered. The morphological information of this species has been well described, but its chloroplast genome characteristics and comparison with species of the same genus remain to be reported. Our results showed that the total length of chloroplast (cp.) genome of P. saxatilis is 162,659bp, with a GC content of 37.5%. The cp. genome contains 134 genes, including 90 known protein-coding genes, 36 tRNA genes, and 8 rRNA genes. P. saxatilis demonstrated similar characteristics to other species of genus Pulsatilla. Herein, we compared cp. genomes of 10 species, including P. saxatilis, and found that the cp. genomes of the genus Pulsatilla are extremely similar, with a length of 162,322-163,851bp. Furthermore, The SSRs of Pulsatilla ranged from 10 to 22bp in length. Among the four structural regions of the cp. genome, most long repeats and SSRs were detected in the LSC region, followed by that in the SSC region, and least in IRA/ IRB regions. The most common types of long repeats were forward and palindromic repeats, followed by reverse repeats, and only a few complementary repeats were found in 10 cp. genomes. We also analyzed nucleotide diversity and identified ccsA_ndhD, rps16_trnK-UUU, ccsA, and rbcL, which could be used as potential molecular markers for identification of Pulsatilla species. The results of the phylogenetic tree constructed by connecting the sequences of high variation regions were consistent with those of the cp. gene phylogenetic tree, and the species more closely related to P. saxatilis was identified as the P. campanella. It was determined that the closest species to P. saxatilis is P. campanella, which is the same as the conclusion based on pollen grain characteristics, but different from the P. chinensis determined based on morphological characteristics. By revealing information on the chloroplast characteristics, development, and evolution of the cp. genome and the potential molecular markers, this study provides effective molecular data regarding the evolution, genetic diversity, and species identification of the genus Pulsatilla.

Variations and reduction of plastome are associated with the evolution of parasitism in Convolvulaceae.

Parasitic lifestyle can often relax the constraint on the plastome, leading to gene pseudogenization and loss, and resulting in diverse genomic structures and rampant genome degradation. Although several plastomes of parasitic Cuscuta have beenreported, the evolution of parasitism in the family Convolvulaceae which is linked to structural variations and reduction of plastome has not been well investigated. In this study, we assembled and collected 40 plastid genomes belonging to 23 species representing four subgenera of Cuscuta and ten species of autotrophic Convolvulaceae. Our findings revealed nine types of structural variations and six types of inverted repeat (IR) boundary variations in the plastome of Convolvulaceae spp. These structuralvariations were associated with the shift of parasitic lifestyle, and IR boundary shift, as well as the abundance of long repeats. Overall, the degradation of Cuscuta plastome proceeded gradually, with one clade exhibiting an accelerated degradation rate. We observed five stages of gene loss in Cuscuta, including NAD(P)H complex → PEP complex → Photosynthesis-related → Ribosomal protein subunits → ATP synthase complex. Based on our results, we speculated that the shift of parasitic lifestyle in early divergent time promoted relaxed selection on plastomes, leading to the accumulation of microvariations, which ultimately resulted in the plastome reduction. This study provides new evidence towardsa better understanding of plastomic evolution, variation, and reduction in the genus Cuscuta.

The Characterization of G-Quadruplexes in Tobacco Genome and Their Function under Abiotic Stress.

Tobacco is an ideal model plant in scientific research. G-quadruplex is a guanine-rich DNA structure, which regulates transcription and translation. In this study, the prevalence and potential function of G-quadruplexes in tobacco were systematically analyzed. In tobacco genomes, there were 2,924,271,002 G-quadruplexes in the nuclear genome, 430,597 in the mitochondrial genome, and 155,943 in the chloroplast genome. The density of the G-quadruplex in the organelle genome was higher than that in the nuclear genome. G-quadruplexes were abundant in the transcription regulatory region of the genome, and a difference in G-quadruplex density in two DNA strands was also observed. The promoter of 60.4% genes contained at least one G-quadruplex. Compared with up-regulated differentially expressed genes (DEGs), the G-quadruplex density in down-regulated DEGs was generally higher under drought stress and salt stress. The G-quadruplex formed by simple sequence repeat (SSR) and its flanking sequence in the promoter region of the NtBBX (Nitab4.5_0002943g0010) gene might enhance the drought tolerance of tobacco. This study lays a solid foundation for further research on G-quadruplex function in tobacco and other plants.

Phylogeny and re‐circumscription of Cheniella (Leguminosae: Cercidoideae) based on plastome data and morphology, with description of three new species

AbstractSubfamily Cercidoideae is an early‐diverging lineage of Leguminosae, within which the number and classification of genera have been controversial. Cheniella is a recently described genus in the Cercidoideae which requires revision and testing of its monophyly and circumscription. Here we infer the phylogenetic position and infrageneric relationships of Cheniella as well as the intergeneric relationships of Cercidoideae using 48 newly sequenced plastid genomes, including 34 individuals representing all species of Cheniella. Our phylogenetic analyses yield a well‐resolved tree of Cercidoideae with robust support at most nodes. We also present morphological studies through field work and herbarium studies to re‐assess the classification and circumscription of the genus. Based on the results of molecular analyses and morphological studies combined with distribution data, we broaden the circumscription of Cheniella to comprise a total of 15 species and 3 subspecies, including three new species (C. hechiensis, C. longistaminea, C. pubicarpa), one new combination (C. tianlinensis) and one new status and combination (C. longipes).

The complete Chloroplast genome of Stachys geobombycis and comparative analysis with related Stachys species

Herb genomics, at the forefront of traditional Chinese medicine research, combines genomics with traditional practices, facilitating the scientific validation of ancient remedies. This integration enhances public understanding of traditional Chinese medicine’s efficacy and broadens its scope in modern healthcare. Stachys species encompass annual or perennial herbs or small shrubs, exhibiting simple petiolate or sessile leaves. Despite their wide-ranging applications across various fields, molecular data have been lacking, hindering the precise identification and taxonomic elucidation of Stachys species. To address this gap, we assembled the complete chloroplast (CP) genome of Stachys geobombycis and conducted reannotation and comparative analysis of seven additional species within the Stachys genus. The findings demonstrate that the CP genomes of these species exhibit quadripartite structures, with lengths ranging from 14,523 to 150,599 bp. Overall, the genome structure remains relatively conserved, hosting 131 annotated genes, including 87 protein coding genes, 36 tRNA genes, and 8 rRNA genes. Additionally, 78 to 98 SSRs and long repeat sequences were detected , and notably, 6 highly variable regions were identified as potential molecular markers in the CP genome through sequence alignment. Phylogenetic analysis based on Bayesian inference and maximum likelihood methods strongly supported the phylogenetic position of the genus Stachys as a member of Stachydeae tribe. Overall, this comprehensive bioinformatics study of Stachys CP genomes lays the groundwork for phylogenetic classification, plant identification, genetic engineering, evolutionary studies, and breeding research concerning medicinal plants within the Stachys genus.

An Integrative Study of Scrophularia takesimensis Nakai in an Ovalbumin-Induced Murine Model of Asthma: The Effect on T Helper 2 Cell Activation.

Scrophularia have traditionally been used as herbal medicines to treat neuritis, sore throats, and laryngitis. In particular, S. takesimensis, a Korean endemic species with restricted distribution on Ulleung Island, holds significant resource and genetic value. However, its pharmacological properties have not been thoroughly evaluated. Thus, we provide detailed morphological characteristics and genomic information for S. takesimensis in this study. Moreover, its pharmacological activity was evaluated in an ovalbumin-induced asthma rat model, using extracts of S. takesimensis roots (100 or 200 mg/kg). The distinguishing features of S. takesimensis from related species include the presence or absence of stem wings, leaf shape, and habitat. The chloroplast (cp) genome of this species is 152,420 bp long and exhibits a conserved quadripartite structure. A total of 114 genes were identified, which included 80 protein-coding genes, 30 transfer RNA (tRNA) genes, and 4 ribosomal RNA (rRNA) genes. The gene order, content, and orientation of the S. takesimensis cp genome was highly conserved and consistent with the general structure observed in S. buergeriana and S. ningpoensis cp genomes. Confirming the anti-inflammatory effects of S. takesimensis extract (STE) using an established mouse model of ovalbumin-induced asthma, we observed reduced asthmatic phenotypes, including inflammatory cell infiltration, mucus production, and suppression of T helper 2 (Th2) cell. Furthermore, STE treatment reduced Th2 cell activation and differentiation. This study underscores the medicinal value of S. takesimensis. The importance of preserving S. takesimensis was revealed and crucial insights were provided for further research on its utilization as a medicinal resource.

Plastid phylogenomics and fossil evidence provide new insights into the evolutionary complexity of the ‘woody clade’ in Saxifragales

BackgroundThe “woody clade” in Saxifragales (WCS), encompassing four woody families (Altingiaceae, Cercidiphyllaceae, Daphniphyllaceae, and Hamamelidaceae), is a phylogenetically recalcitrant node in the angiosperm tree of life, as the interfamilial relationships of the WCS remain contentious. Based on a comprehensive sampling of WCS genera, this study aims to recover a robust maternal backbone phylogeny of the WCS by analyzing plastid genome (plastome) sequence data using Bayesian inference (BI), maximum likelihood (ML), and maximum parsimony (MP) methods, and to explore the possible causes of the phylogenetic recalcitrance with respect to deep relationships within the WCS, in combination with molecular and fossil evidence.ResultsAlthough the four WCS families were identically resolved as monophyletic, the MP analysis recovered different tree topologies for the relationships among Altingiaceae, Cercidiphyllaceae, and Daphniphyllaceae from the ML and BI phylogenies. The fossil-calibrated plastome phylogeny showed that the WCS underwent a rapid divergence of crown groups in the early Cretaceous (between 104.79 and 100.23 Ma), leading to the origin of the stem lineage ancestors of Altingiaceae, Cercidiphyllaceae, Daphniphyllaceae, and Hamamelidaceae within a very short time span (∼4.56 Ma). Compared with the tree topology recovered in a previous study based on nuclear genome data, cytonuclear discordance regarding the interfamilial relationships of the WCS was detected.ConclusionsMolecular and fossil evidence imply that the early divergence of the WCS might have experienced radiative diversification of crown groups, extensive extinctions at the genus and species levels around the Cretaceous/Paleocene boundary, and ancient hybridization. Such evolutionarily complex events may introduce biases in topological estimations within the WCS due to incomplete lineage sorting, cytonuclear discordance, and long-branch attraction, potentially impacting the accurate reconstruction of deep relationships.

Chloroplast genome structure analysis of Equisetum unveils phylogenetic relationships to ferns and mutational hotspot region.

Equisetum is one of the oldest extant group vascular plants and is considered to be the key to understanding vascular plant evolution. Equisetum is distributed almost all over the world and has a high degree of adaptability to different environments. Despite the fossil record of horsetails (Equisetum, Equisetaceae) dating back to the Carboniferous, the phylogenetic relationship of this genus is not well, and the chloroplast evolution in Equisetum remains poorly understood. In order to fill this gap, we sequenced, assembled, and annotated the chloroplast genomes of 12 species of Equisetum, and compared them to 13 previously published vascular plants chloroplast genomes to deeply examine the plastome evolutionary dynamics of Equisetum. The chloroplast genomes have a highly conserved quadripartite structure across the genus, but these chloroplast genomes have a lower GC content than other ferns. The size of Equisetum plastomes ranges from 130,773 bp to 133,684 bp and they encode 130 genes. Contraction/expansion of IR regions and the number of simple sequences repeat regions underlie large genomic variations in size among them. Comparative analysis revealed we also identified 13 divergence hotspot regions. Additionally, the genes accD and ycf1 can be used as potential DNA barcodes for the identification and phylogeny of the genus Equisetum. Twelve photosynthesis-related genes were specifically selected in Equisetum. Comparative genomic analyses implied divergent evolutionary patterns between Equisetum and other ferns. Phylogenomic analyses and molecular dating revealed a relatively distant phylogenetic relationship between Equisetum and other ferns, supporting the division of pteridophyte into Lycophytes, Equisetaceae and ferns. The results show that the chloroplast genome can be used to solve phylogenetic problems within or between Equisetum species, and also provide genomic resources for the study of Equisetum systematics and evolution.

The genome sequence of subterranean clover, Trifolium subterraneum L. (Fabaceae)

We present a genome assembly from an individual Trifolium subterraneum (subterranean clover; Tracheophyta; Magnoliopsida; Fabales; Fabaceae). The genome sequence is 483.8 megabases in span. Most of the assembly is scaffolded into 8 chromosomal pseudomolecules. The mitochondrial and plastid genome assemblies have lengths of 309.28 kilobases and 144.76 kilobases in length, respectively.

Characteristics and Comparative Analysis of the Complete Plastomes of Apostasia fujianica and Neuwiedia malipoensis (Apostasioideae)

Apostasioideae, the early divergent subfamily of Orchidaceae, comprises Apostasia and Neuwiedia genera with approximately 20 species. Despite extensive research on Apostasioideae, previous studies have struggled to resolve taxonomic issues, particularly concerning the position of species within this subfamily. Here, we sequenced and annotated plastomes of Apostasia fujianica and Neuwiedia malipoensis, unveiling their phylogenetic relationships and shared plastome features with the other five published plastomes. We identified and analyzed the length, GC content, repeat sequences, and RSCU values of the chloroplast genomes. It is noteworthy that the chloroplast genome of N. malipoensis stands out as the largest among all known chloroplast genomes within the Apostasioideae subfamily, primarily due to contributions from both the LSC and SSC regions. Furthermore, our analysis revealed three unique structural rearrangements located approximately 10k–47k bp (ycf3–trnS-GCU) and 58k–59k bp(accD) in the LSC region and 118k–119k (ndhI) bp in the SSC region of the chloroplast genomes across all five species within the Apostasia genus, which presents a potential avenue for identifying distinctive chloroplast genetic markers, setting them apart from other orchid plants. And a total of four mutational hotspots (rpoC2, atpH, rps4, ndhK, and clpP) were identified. Moreover, our study suggested that Apostasia and Neuwiedia formed a monophyletic group, with Apostasia being sister to Neuwiedia. Within the Apostasia genus, five species were classified into two major clades, represented as follows: (A. odorata (A. shenzhenica and A. fujianica) (A. ramifera and A. wallichii)). These findings hold significance in developing DNA barcoding of Apostasioideae and contribute to the further phylogenetic understanding of Apostasioideae species.

Mitochondrial genome variation and intergenomic sequence transfers in Hevea species.

Among the Hevea species, rubber tree (Hevea brasiliensis) is the most important source of natural rubber. In previous studies, we sequenced the complete nuclear and chloroplast genomes of Hevea species, providing an invaluable resource for studying their phylogeny, disease resistance, and breeding. However, given that plant mitochondrial genomes are more complex and more difficult to assemble than that of the other organelles, little is known about their mitochondrial genome, which limits the comprehensive understanding of Hevea genomic evolution. In this study, we sequenced and assembled the mitochondrial genomes of four Hevea species. The four mitochondrial genomes had consistent GC contents, codon usages and AT skews. However, there were significant differences in the genome lengths and sequence repeats. Specifically, the circular mitochondrial genomes of the four Hevea species ranged from 935,732 to 1,402,206 bp, with 34-35 unique protein-coding genes, 35-38 tRNA genes, and 6-13 rRNA genes. In addition, there were 17,294-46,552 bp intergenomic transfer fragments between the chloroplast and mitochondrial genomes, consisting of eight intact genes (psaA, rrn16S, tRNA-Val, rrn5S, rrn4.5S, tRNA-Arg, tRNA-Asp, and tRNA-Asn), intergenic spacer regions and partial gene sequences. The evolutionary position of Hevea species, crucial for understanding its adaptive strategies and relation to other species, was verified by phylogenetic analysis based on the protein-coding genes in the mitochondrial genomes of 21 Malpighiales species. The findings from this study not only provide valuable insights into the structure and evolution of the Hevea mitochondrial genome but also lay the foundation for further molecular, evolutionary studies, and genomic breeding studies on rubber tree and other Hevea species, thereby potentially informing conservation and utilization strategies.

Chloroplast genomes of Caragana tibetica and Caragana turkestanica: structures and comparative analysis

BackgroundThe genus Caragana encompasses multiple plant species that possess medicinal and ecological value. However, some species of Caragana are quite similar in morphology, so identifying species in this genus based on their morphological characteristics is considerably complex. In our research, illumina paired-end sequencing was employed to investigate the genetic organization and structure of Caragana tibetica and Caragana turkestanica, including the previously published chloroplast genome sequence of 7 Caragana plants.ResultsThe lengths of C. tibetica and C. turkestanica chloroplast genomes were 128,433 bp and 129,453 bp, respectively. The absence of inverted repeat sequences in these two species categorizes them under the inverted repeat loss clade (IRLC). They encode 110 and 111 genes (4 /4 rRNA genes, 30 /31tRNA genes, and 76 /76 protein-coding genes), respectively. Comparison of the chloroplast genomes of C. tibetica and C. turkestanica with 7 other Caragana species revealed a high overall sequence similarity. However, some divergence was observed between certain intergenic regions (matK-rbcL, psbD-psbM, atpA-psbI, and etc.). Nucleotide diversity (π) analysis revealed the detection of five highly likely variable regions, namely rps2-atpI, accD-psaI-ycf4, cemA-petA, psbN-psbH and rpoA-rps11. Phylogenetic analysis revealed that C. tibetica’s sister species is Caragana jubata, whereas C. turkestanica’s closest relative is Caragana arborescens.ConclusionsThe present study provides worthwhile information about the chloroplast genomes of C. tibetica and C. turkestanica, which aids in the identification and classification of Caragana species.

Chloroplast genome of Ecbolium viride: Plastome evolution and Phylogenomics of Justiceae (Acanthaceae, Acanthoideae).

Justicieae is the most taxonomically complex tribe in Acanthaceae. Here, we sequenced the plastome of Ecbolium viride, a medicinally important species. The genome was analyzed with previously reported plastome of Justiceae. The plastome of E. viride has quadripartite structure with a length of 151, 185 bp. The comparative genomic analyses revealed no structural inversion in Justiceae and some regions (rpoC2, ycf2, ycf1 and ndhH rps16-trnQ-UGG, and trnL-CAA-ycf15) exhibiting a significant level of nucleotide divergence. The positive selection analyses revealed that some species in the tribe have undergone adaptive evolution. The visualization of the boundaries between the single copy and inverted repeat regions revealed that Justiceae chloroplast genome experienced some levels of variation which give an insight into the evolution of the species. The longest genome was in the earliest diverged taxa of the tribe P. haikangense and from this genome, a series of contraction and expansion occurred contributing to the evolution of other lineages. The plastome-based phylogeny revealed and confirmed the monophyly of Justiceae, polyphyly of Justicia and supported the tribal classification Graptophyllinae, Tetrameriinae, Isoglossinae. We proposed that Declipterinae should be treated as subtribe and the status of Justiciinae can only be confirmed after the resolution of the polyphyletic Justicia.

Description of Naviculavanseea sp. nov. (Naviculales, Naviculaceae), a new species of diatom from the highly alkaline Lake Van (Republic of Türkiye) with complete characterisation of its organellar genomes and multigene phylogeny.

The current article describes Naviculavanseeasp. nov., a new species of diatom from Lake Van, a highly alkaline lake in Eastern Anatolia (Türkiye). The description is based on light and scanning electron microscopy performed on two monoclonal cultures. The complete nuclear rRNA clusters and plastid genomes have been sequenced for these two strains and the complete mitogenome for one of them. The plastome of both strains shows the probable loss of a functional ycf35 gene. They also exhibit two IB4 group I introns in their rrl, each encoding for a putative LAGLIDADG homing endonuclease, with the first L1917 IB4 intron reported amongst diatoms. The Maximum Likelihood phylogeny inferred from a concatenated alignment of 18S, rbcL and psbC distinguishes N.vanseea sp. nov. from the morphologically similar species Naviculacincta and Naviculamicrodigitoradiata.

Wasabi Gone Wild? Origin and Characterization of the Complete Plastomes of Ulleung Island Wasabi (Eutrema japonicum; Brassicaceae) and Other Cultivars in Korea.

Korean wasabi occurs naturally on the young oceanic, volcanic Ulleung Island off the east coast of the Korean Peninsula. Although the Ulleung Island wasabi is reported as Eutrema japonicum and has been suggested to be morphologically identical to cultivars in Korea, very little is known about its taxonomic identity and relationship with other cultivars. In this study, we sequenced the complete chloroplast DNA sequences of three naturally occurring Ulleung Island wasabi plants and six cultivars ('Daewang', 'Daruma', 'Micado', 'Orochi', 'Green Thumb', and 'Shogun') from continental Korea and determined the taxonomic identity of Korean wasabi on Ulleung Island. The size and organization of the complete chloroplast genomes of the nine accessions were nearly identical to those of previously reported wasabi cultivars. In addition, phylogenetic analysis based on the complete plastomes suggested that Ulleung Island wasabi most likely comprises various wasabi cultivars with three chlorotypes ('Shogun', 'Green Thumb', and a unique Chusan type). Based on the complete plastomes, we identified eight chlorotypes for the major wasabi cultivars and the Ulleung Island wasabi. Two major groups (1-'Mazuma' and 'Daruma', and 2-'Fujidaruma'/'Shimane No. 3'/Ulleung Island wasabi/five cultivars in Korea) were also identified based on mother line genealogical history. Furthermore, different types of variations (mutations, insertions/deletions (indels), mononucleotide repeats, and inversions) in plastomes were identified to distinguish different cultivar lines and five highly divergent hotspots. The nine newly obtained complete plastomes are valuable organelle genomic resources for species identification and infraspecific phylogeographic studies on wild and cultivated wasabi.

Long-read datasets of Kayu Bawang (Azadirachta excelsa (Jack) Jacobs) from 3 different identified seed stands in Bengkulu (Sumatra), Indonesia and its phylogenetic relationships

Abstract* Azadirachta excelsa (Jack) Jacobs, Kayu bawang (Meliaceae) is economically valuable and widely used by the local community in Bengkulu (Sumatra) as carpentry and construction wood because of its good durability class. However, it still has ambiguous scientific multiple names, such as Azadirachta excelsa, Protium javanicum, and Dysoxylum mollissimum. Additional tools such as molecular approaches can be used to verify whether it is true or not that Kayu bawang is scientifically named as Azadirachta excelsa based on previous morphological identification. This study aimed to construct draft chloroplast genome and verify the scientific name based on molecular identification using a single rbcL gene marker. Genomic DNA was extracted from bark cambium originated from three different provenances in Bengkulu, Indonesia, namely TBT-A, TBT-K, and TBT-S. MinION from Oxford Nanopore Technologies was used to sequence the samples following manufacture protocols SQK-LSK109 yielding 481.6 Mb for TBT-A, 597.4 Mb for TBT-K, and 853.1 Mb for TBT-S, respectively. Generated data were assembled and constructed, namely 58,780 bp (14 tRNAs and 47 encoding genes) for TBT-A, 142,139 bp (4 rRNAs, 24 tRNAs, and 78 encoding genes) for TBT-K, and 84,906 bp (24 tRNAs and 53 encoding genes) for TBT-S. Based on the phylogenetic tree, Azadirachta excelsa from three identified tree stands were placed in the same group with other Azadirachta excelsa accessions.

Optimizing DNA Extraction and Selecting Suitable Regions for Biodiversity Assessment: A Study on Shorea leprosula

The extraction method plays a crucial role in obtaining high-quality DNA samples, which is indispensable for various molecular biology techniques and analyses, enabling a deeper comprehension of genetic information and biological processes. The objectives of the study were: a) to optimize the chloroplast DNA extraction protocol by comparing modified CTAB methods and GeneAid for both leaf and wood samples of Shorea leprosula, a major commercial timber species, and b) to identify a suitable cpDNA region that exhibits variability and universality across taxa. Total DNA was analyzed by gel electrophoresis followed by Sanger sequencing to determine the amplification success. The results revealed that trnL intron, trnL-trnF, and trnG yielded readable sequences of the expected length (maximum 586 bp, 480 bp, and 908 bp, respectively), while the rps 16 intron failed to assemble a contig. The petL-psbE region provided long readability for reverse sequences (769 bp) but not for the forward sequence (195 bp). Higher successful DNA extraction was achieved from the leaves compared to the woods. The lower sequencing quality may be attributed to suboptimal primer design, the structural features of the regions resulting from extensive repetitive sequences, and the suboptimal condition of the extraction method in eliminating wood chemical compounds.