Chloride Research Articles

Optimizing mechanical and durability properties of recycled aggregate concrete using pozzolanic slurries and modified mixing approach

A sustainable and reliable methodology to strengthen the mortar adhered to recycled concrete aggregate (RCA) is crucial for optimizing its utilization in construction. This research proposes a mortar strengthening method by soaking RCA in different dosages (weight percentages) of pozzolanic slurries, i.e., fly ash and silica powder (F-S), fly ash and cement (F-C), cement and silica powder (C-S) for various durations. The influence of each slurry dosage and soaking duration on RCA's physical and mechanical properties and surface morphology were examined. Further, a modified two-stage mixing approach (M-TSMA) was employed to produce recycled aggregate concrete (RAC) incorporating 100% untreated and surface-treated RCA. The impact of M-TSMA and treated RCA on concrete was demonstrated regarding its mechanical and durability properties, such as compressive strength, ultrasonic pulse velocity, rebound hammer, sorptivity, and resistance to chloride ions. Results show that soaking RCA in 30% C-S slurry for 6 h enhances RCA's overall properties by increasing the calcium silicate hydrate (C-S-H) content. Moreover, employing M-TSMA and incorporating treated RCA improves the mechanical and durability properties of RAC by reducing microcracks and densifying the microstructure. Overall, the proposed surface treatment and M-TSMA can potentially enhance RAC performance with complete RCA utilization.

Allosteric Cholesterol Site in Glycine Receptors Characterized through Molecular Simulations.

Glycine receptors are pentameric ligand-gated ion channels that conduct chloride ions across postsynaptic membranes to facilitate fast inhibitory neurotransmission. In addition to gating by the glycine agonist, interactions with lipids and other compounds in the surrounding membrane environment modulate their function, but molecular details of these interactions remain unclear, in particular, for cholesterol. Here, we report coarse-grained simulations in a model neuronal membrane for three zebrafish glycine receptor structures representing apparent resting, open, and desensitized states. We then converted the systems to all-atom models to examine detailed lipid interactions. Cholesterol bound to the receptor at an outer-leaflet intersubunit site, with a preference for the open and desensitized versus resting states, indicating that it can bias receptor function. Finally, we used short atomistic simulations and iterative amino acid perturbations to identify residues that may mediate allosteric gating transitions. Frequent cholesterol contacts in atomistic simulations clustered with residues identified by perturbation analysis and overlapped with mutations influencing channel function and pathology. Cholesterol binding at this site was also observed in a recently reported pig heteromeric glycine receptor. These results indicate state-dependent lipid interactions relevant to allosteric transitions of glycine receptors, including specific amino acid contacts applicable to biophysical modeling and pharmaceutical design.

Corrosion Behavior of Ni-Cr Alloys with Different Cr Contents in NaCl-KCl-MgCl2.

This study investigates the corrosion behavior of Ni-Cr binary alloys, including Ni-10Cr, Ni-15Cr, Ni-20Cr, Ni-25Cr, and Ni-30Cr, in a NaCl-KCl-MgCl2 molten salt mixture through gravimetric analysis. Corrosion tests were conducted at 700 °C, with the maximum immersion time reaching up to 100 h. The corrosion rate was determined by measuring the mass loss of the specimens at various time intervals. Verifying corrosion rates by combining mass loss results with the determination of element dissolution in molten salts using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Detailed examinations of the corrosion products and morphology were conducted using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Micro-area elemental analysis on the corroded surfaces was performed using an energy dispersive spectrometer (EDS), and the elemental distribution across the corrosion cross-sections was mapped. The results indicate that alloys with lower Cr content exhibit superior corrosion resistance in the NaCl-KCl-MgCl2 molten salt under an argon atmosphere compared to those with higher Cr content; no corrosion products were retained on the surfaces of the lower Cr alloys (Ni-10Cr, Ni-15Cr). For the higher Cr alloys (Ni-20Cr, Ni-25Cr, Ni-30Cr), after 20 h of corrosion, a protective layer was observed in certain areas. The formation of a stable Cr2O3 layer in the initial stages of corrosion for high-Cr content alloys, which reacts with MgO in the molten salt to form a stable MgCr2O4 spinel structure, provides additional protection for the alloys. However, over time, even under argon protection, the MgCr2O4 protective layer gradually degrades due to chloride ion infiltration and chemical reactions at high temperatures. Further analysis revealed that chloride ions play a pivotal role in the corrosion process, not only facilitating the destruction of the Cr2O3 layer on the alloy surfaces but also possibly accelerating the corrosion of the metallic matrix through electrochemical reactions. In conclusion, the corrosion behavior of Ni-Cr alloys in the NaCl-KCl-MgCl2 molten salt environment is influenced by a combination of factors, including Cr content, chloride ion activity, and the formation and degradation of protective layers. This study not only provides new insights into the corrosion resistance of Ni-Cr alloys in high-temperature molten salt environments but also offers significant theoretical support for the design and optimization of corrosion-resistant alloy materials.

Inducing α-Helicity in Peptides by Silver Coordination to Cysteine.

Short peptide sequences consisting of two cysteine residues separated by three other amino acids display complete change from random coil to α-helical secondary structure in response to addition of Ag+ ions. The folded CXXXC/Ag+ complex involves formation of multinuclear Ag+ species and is stable in a wide pH range from below 3 to above 8. The complex is stable through reversed-phase HPLC separation as well as towards a physiological level of chloride ions, based on far-UV circular dichroism spectroscopy. In electrospray MS under acidic conditions a peptide dimer with four Ag+ ions bound was observed, and modelling based on potentiometric experiments supported this to be the dominating complex at neutral pH together with a peptide dimer with 3 Ag+ and one proton at lower pH. The complex was demonstrated to work as a N-terminal nucleation site for inducing α-helicity into longer peptides. This type of silver-mediated peptide assembly and folding may be of more general use for stabilizing not only peptide folding but also for controlling oligomerization even under acidic conditions.

Numerical modeling of the behavior of concrete exposed to chloride ions by coupling age and mechanical stresses

This study proposes a quantitative examination of the issue of chloride ion infiltration in concrete under mechanical strain in a hostile setting while considering the influence of time, commonly referred to as the aging effect. The relationship between the diffusion coefficient and age, when subjected to specific levels of uniaxial or biaxial stresses for various W/C ratios, has allowed us to assess the concentration of chloride ions and the time needed for corrosion to begin through the coating layer in three dimensions. The numerical model results corroborate the notion that the corrosion process is affected by the fluctuation of the diffusion coefficient, which is directly linked to the age factor and the mechanical stresses exerted on the concrete. The model also emphasizes the extended distribution of chloride ion concentration at a certain depth, which is connected to the ratio of water to cement, influenced by the diffusion coefficient and the degree of mechanical stress in older structures.

Dynamic Marine Atmospheric Corrosion Behavior of AZ91 Mg Alloy Sailing from Yellow Sea to Western Pacific Ocean.

In this work, the dynamic marine atmospheric corrosion behavior of AZ91 Mg alloy sailing from Yellow Sea to Western Pacific Ocean was studied. The corrosion rates were measured using the weight loss method. The microstructure, phase, and chemical composition of corroded samples were investigated by SEM, EDS, XRD, and XPS. The results show that the evolution of corrosion rates of AZ91 Mg alloy was divided into three stages: rapidly increasing during the first 3 months, then remaining stable for the next three months, and finally decreasing after 6 months. The annual corrosion rate of Mg alloy reached 32.50 μm/y after exposure for 12 months in a dynamic marine atmospheric environment, which was several times higher than that of the static field exposure tests. AZ91 magnesium alloy was mainly subjected to localized corrosion with more destructiveness to Mg parts, which is mainly due to the synergistic effect of high relative humidity, the high deposition rate of chloride ion, sulfur dioxide acidic gas produced by fuel combustion, and rapid temperature changes caused by the alternating changes in longitude and latitude during navigation. As the exposure time increased, the corrosion pits gradually increased and deepened. The maximum depth of the corrosion pit was 197 μm after 12 months of exposure, which is almost 6 times the average corrosion depth. This study provides scientific data support for the application of magnesium alloys in shipborne aircraft and electronic equipment. The results could provide guidance for the design of new magnesium alloys and development of anti-corrosion technologies.

Physico-chemical and correlation study of ground drinking water of Tonk district of Rajasthan (India)

This study investigates the qualitative analysis of groundwater obtained from the Tonk district of Rajasthan to determine its suitability as potable water. Around 321 ground drinking water samples were collected and analysed for various physico-chemical characteristics including pH, electrical conductivity (EC), total dissolved solid (TDS), HCO3−, F−, Cl−, SO42−, NO3−, Ca2+, Mg2+, total hardness (TH) and total alkalinity (TA) in Tonk district of Rajasthan (India). The groundwater in the region is a little alkaline and hard. The EC during the pre-monsoon period varies from 434 to 7271 µS/cm, while in the post-monsoon period, it ranges from 356 to 8871 µS/cm. TDS of samples ranged between 285 to 5090 mg/L in the pre-monsoon and 247 to 6140 mg/L post-monsoon seasons. Few samples have EC, TDS, and TH levels higher than the permissible limit, restricts its usage as drinking water. The water quality in the study area varies from soft-fresh to hard-brackish in both pre- and post-monsoon seasons. Anion concentrations in analysed samples followed the order: HCO3− > Cl− > SO42− > NO3− > F−. Notably, the Water quality index (WQI) results for all collected samples fall within the range of 4.55–96.83, indicating they are considered safe and suitable for drinking purposes. Water quality data was analysed by correlation study and geochemical processes. A strong correlation between the Water Quality Index (WQI) and fluoride levels is found in both seasons. The geochemical analysis shows that most of the samples are in the rock water interaction zone, with some in the evaporation zone due to the high content of chloride ions. The groundwater chemistry appears to be influenced by rock-water interaction and evaporation sedimentation. The molar ratio of Ca2+/Mg2+ denotes calcite dissolution and silicate weathering revealing enrichment of Ca2+ and HCO3− ions in aquifer.

Photogeneration of Hydrogen: Insights from a Pt(II)‐Complex Incorporated into a Covalent Organic Framework

AbstractPt(II)‐based molecular catalysts stand as a prototypical system in hydrogen evolution reactions (HER) owing to their consistently elevated activity levels. Their integration into heterogeneous systems thus provides an ideal platform to develop catalytic materials with optimal atom economy. In this work, by rational molecular design, we have synthesized a novel two‐dimensional photoactive Covalent Organic Framework (COF), wherein the pore walls host a quinoline‐based α‐diimine ligand serving as a coordination site for anchoring a Pt(II) molecular catalyst. Thorough structural analyses, employing X‐ray photoelectron spectroscopy (XPS), infrared spectroscopy (FT‐IR), diffuse reflectance spectroscopy (DR), coupled with DFT calculations, distinctly confirm the Pt(II) complexation through the coordination site of the α‐diimine ligand. The Pt(II)‐metalated COF exhibits photocatalytic activity with a hydrogen evolution rate reaching up to 1300 μmol g−1 h−1. Nevertheless, the occurrence of platinum nanoparticles in post‐catalysis samples, along with reduced photocatalytic activity in the presence of chloride ions, suggests that Pt(II) anchored into the COF backbone might not be the primary catalytic site.

Performance of limestone calcined clay cement (LC3) incorporating low-grade marine clay

Clay is a globally abundant material and can potentially be used as a cement substitute after calcination. Though kaolinitic clay exhibits notable reactivity, the potential of low-grade clay with relatively low kaolinite content remains underexplored. This study comprehensively analyzed the chemical and mineralogical composition of marine clays at various locations and depths in Singapore, assessing their feasibility for preparing limestone calcined clay cement (LC3). The hydration kinetics and microstructure development of LC3 pastes, incorporating calcined marine clay, were investigated by XRD, isothermal calorimetry, SEM, and MIP. Additionally, a mini-migration test was employed to investigate chloride ion diffusion in LC3 pastes. The results revealed that Singapore marine clays contain relatively low kaolinite content (16–20% by QXRD). Despite a 25% reduction of 28 days compressive strength compared to reference OPC, LC3 samples exhibited outstanding resistance against chloride penetration regardless of kaolinite content (<40%) or replacement level (LC3-70 or LC3-50). The chloride diffusion coefficient (LC3-50) is one order of magnitude lower than the OPC system. Overall, our findings broaden the selection of raw materials for LC3 preparation and underscore the robustness of LC3 to resist chloride penetration, irrespective of variations in the clay's quality or source.

Experimental and dynamic molecular study of zinc extraction from sphalerite concentrate in ternary deep eutectic solvent

The utilization of deep eutectic solvents (DESs) as a novel class of solvents in metal production offers a promising alternative to aqueous solutions due to their biocompatibility and non-aqueous nature. This study investigated the leaching of sphalerite concentrate using a ternary stable DES composed of choline chloride (ChCl), p-toluene sulfonic acid (PTSA), and ethylene glycol (EG) (at a molar ratio of 1:1:1). The effects of time, temperature, and milling time on zinc recovery were examined within specific ranges (20–1440 min, 40–100 °C, and 0–24 h, respectively). The study revealed the significant influence of time and temperature on zinc dissolution efficiency within ChCl:PTSA:EG. Higher temperatures and longer leaching times were found to improve efficiency substantially. The research emphasized the crucial role of milling time, demonstrating that longer durations enhanced zinc efficiency by introducing more defects on the sphalerite surface and reducing particle size. Under optimized conditions, including a temperature of 100 °C, 24 h of ball milling, and 1440 min of leaching, a zinc recovery of 99.7% was achieved. Infrared analysis confirmed the chemical stability of the solvents during the leaching process. The sphalerite leaching process involved the formation of zinc chloride ion complexes and evolution H2S gas. An unexpected finding is the presence of lead sulfate in the leach residue, which may be attributed to sulfide oxidation to sulfate species. The Avrami kinetic model provided an excellent fit with the sphalerite dissolution data in ChCl:PTSA:EG DES, indicating that the rate-controlling step was primarily influenced by the diffusion process. R2 values for kinetics fitting data were in the range of 0.87–0.97 for temperature of 40–100 °C. The molecular dynamic (MD) simulation findings indicated robust electrostatic interactions between the metal ions Zn2+ and Fe2+ and the Cl− ions of the ChCl molecules. Additionally, the MD calculations showed that the metal ions formed complexes with some O-S-O atoms within the PTSA molecule.

Effects of calcium and barium chloride salts on the solubility and dissolution thermodynamics of glycine and DL-alanine from 288.15 K to 328.15 K

This investigation primarily examines the solubility at equilibrium and the dissolution thermodynamics of two crucial amino acids, glycine and DL-alanine, in aqueous solutions containing calcium and barium chloride salts. The solubilities were measured from 288.15 K to 328.15 K using the analytical gravimetric method. The resulting solubilities were then used to deduce the thermodynamics of the solutions. Subsequently, the free energies associated with solvation through transfer were examined.Furthermore, the research delved into various thermophysical characteristics within electrolyte solutions in aqueous media, establishing correlations. In addition, this study elucidated various non-covalent processes, including the solubility and stability of amino acids, by considering short-range interactions such as solute–solvent, solvent–solvent, and acid–base interactions. This analysis primarily provides insights into the involved molecular interactions and energetics that govern the solubility and behavior of amino acids in various solution environments.

Constructing in-situ polymerized electrolyte for room-temperature solid-state chloride ion battery with enhanced electrochemical performance

Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries (CIB), the construction of solid polymer electrolytes (SPE) for efficient chloride ion transport is intriguing. However, this is hindered by low ionic conductivity of chloride SPEs and poor cycling performance of CIBs. Herein, an in-situ polymerized and cross-linked poly(ethylene glycol) diacrylate-based chloride SPE with a low plasticizer content of succinonitrile is designed, yielding a room-temperature ionic conductivity of 7.6 × 10−5 S cm−1, which is higher than that of previously reported SPEs for CIBs. Moreover, the use of the as-prepared SPE achieves an integrated organic cathode with significantly enhanced rate performance and capacity retention of 96.1 % after 100 cycles at room temperature, which is much higher than 49.9 % (80 cycles) of the cathode in the CIB with a sandwiched structure. These improved properties are also superior to that of other reported cathodes coupled with different chloride SPEs. The chloride ion transfer mechanism of the cathode is revealed by X-ray photoelectron spectroscopy and energy dispersive spectroscopy.

Developing a novel expression for chloride ion concentration threshold in reinforced concrete: Integration of electrochemical analysis and time-dependent modeling

Chloride ion concentration threshold is a crucial parameter for evaluating the durability of reinforced concrete. This study aimed to develop a novel expression method for this threshold by analyzing the open-circuit potential of steel in simulated mortar pore solution across three pH values. Concurrently, the correlation between pitting potential and chloride ion concentration was examined through potentiodynamic polarization testing. Additionally, Mott-Schottky analysis facilitated the investigation of the passivation film structure on the steel under both passivation and depassivation conditions. By integrating the analysis of the open-circuit potential and pitting potential models in the simulated solution, a time-dependent relationship curve between the chloride ion threshold and time was established. The findings reveal that the steel’s passivation film comprises a dual-layer structure, with its corrosion resistance enhancing as the pH value of the simulated mortar pore solution increases. Furthermore, within the simulated mortar pore solution, the chloride ion concentration threshold exhibited a decreasing trend over time, suggesting a minimum threshold value exists. This research provides a significant foundation for forecasting the corrosion state of steel in steel-reinforced engineering projects.

White-green photoluminescence of manganese(II) complexes with pyrazolo[1,5-a][1,10]phenanthroline-3-carbonitrile

Five manganese(II) complexes with a bidentate pyrazolo[1,5-a][1,10]phenanthroline-3-carbonitrile ligand (L) have been prepared and their structures have been determined. The anion effect on the structural diversity of the complexes has been studied using manganese(II) salts with different anions such as Cl¯, ClO4¯, and Ts¯. A reaction between manganese(II) chloride and L in organic solvents leads to complexes [MnL2Cl2]·xCH2Cl2 (1) and [Mn2L2(H2O)Cl4]·L (2), the use of manganese(II) tosylate in the rection yields in [MnL(H2O)3Ts]Ts·L·H2O (3) and [MnL(H2O)3Ts]Ts (4), and finally, in the case of manganese(II) perchlorate [MnL2(H2O)2](ClO4)2·L (5) is formed. According to the single-crystal X-ray analysis the coordination environment of the Mn(II) ions in the complexes is a distorted octahedron with MnN4Cl2 (1), MnN2O4 (3) and MnN4O2 (5) chromophores; the complex 2 is binuclear, in which two manganese atoms have different coordination geometries – distorted octahedron (MnN2Cl3O) and square pyramid (MnN2Cl3). Chloride ions are coordinated anions; perchlorate ions are in the outer coordination sphere. Tosylate ions can play both coordinating and non-coordinating roles in complexes. X-ray analysis shows that in 2 and 5 one molecule of L has no bonds with manganese atoms, and reveals only intermolecular interactions through π-π stacking. This leads to the formation of cocrystals [Mn2L2(H2O)Cl4]·L or [MnL2(H2O)2](ClO4)2·L, that affects the photophysical properties of these compounds. In order to compare the effect of L coordination on the photoluminescence properties of manganese(II) complexes, the complexes [Mn(phen)3](ClO4)2·xSolv with unsubstituted 1,10-phenanthroline have been synthesized. In contrast to [MnL2(H2O)2](ClO4)2·L, the 1,10-phenanthroline-based compound [Mn(phen)3](ClO4)2·H2O has no emission. Complexes 1, 3, 4 and 5 exhibit a white-green emission in the microsecond range with maxima at 530–565 nm in the solid state, and the photoluminescence properties of 5 are studied in solution.

Strong and tough conductive hydrogels via an amphiphilic macromolecular crosslinker for flexible strain sensor

The strength and toughness of hydrogel are usually achieved through the synergy of chemical cross-linking and physical cross-linking from multi-component contributions. However, there are few reports on hydrogels that rely on a single component to obtain two cross-linked structures. Herein, we successfully synthesized an amphiphilic macromolecular crosslinker (polyoxyethylene 20 oleyl ether acrylate (O20AC)), and introduced it into a system composed of acrylamide (AAm), sodium chloride (NaCl) and water to prepare the P(AAm-O20AC)/NaCl hydrogel with high strength, outstanding toughness, and excellent good conductivity. Notably, the O20AC possess both crosslinker properties, which not only provide hydrogels with a stable chemical cross-linking network, but also its long hydrophobic chain act as physical crosslinking points to give the hydrogel a new pathway of energy dissipation.Depending on the O20AC crosslinker, the P(AAm-O20AC)/NaCl hydrogels exhibit good strength (tensile stress 714.46 kPa), toughness (elongation at break 3005 %), and fatigue resistance (overlap of hysteresis curves in repeated loading–unloading cycles). Besides, the existence of sodium ions and chloride ions also provides the hydrogel with highly sensitive deformation-dependent conductivity (GF is 5.8 in the 400 %-500 % strain range). Collectively, the strategy of preparing chemical and physical double-crosslinked hydrogels by amphiphilic O20AC will provide a bran-new insights for the development of hydrogel sensing materials.

Mn-doped nickel-copper phosphides as oxygen evolution reaction electrocatalyst in alkaline seawater solution

Compared with traditional water electrolysis, electrolysis of seawater has larger resources and a brighter future. However, seawater contains more elements that have greater corrosive effects on electrodes; especially chloride ions (seawater contains more chloride ions) have the greatest impact. The existence of the corrosion problem creates greater difficulties in electrolyzing seawater, further limiting the efficiency of the electrocatalyst for electrolysis of seawater. In this paper, we report a Mn-doped Ni2P/Cu3P as an environmentally friendly monofunctional electrode for seawater electrolysis, which was made by a simple hydrothermal phosphatization operation method. The experimental results show that Mn-doped Ni2P/Cu3P presents overpotential of only 161 mV for oxygen evolution reaction (OER) at iR compensation of 90 and a current density of 10 mA cm−2. It has a small Tafel slope (25.15 mV dec−1) and a large capacitance (9.58 mF cm−2 on 1 × 1 nickel foam), which exceeds most reported oxygen evolution activities of non-precious metal-based electrocatalysts for electrolysis of alkaline seawater. The performance of Ni2P/Cu3P was probably significantly enhanced due to Mn doping by some characterization means. Through Density functional theory (DFT) analysis, it is known that the doping of Mn gives a large enhancement in the adsorption energy of water when Ni2P/Cu3P is electrolyzed with seawater. This paper provides train of thought for the exploration of excellent electrocatalysts for electrolysis of alkaline seawater.

Electrodeposited ZIF-67 reinforced polypyrrole coating on ferritic stainless steel substrate with durable anticorrosion performance

The harsh acidic environment containing chloride ions has created serious corrosion hazards for ferritic stainless steels. Zeolitic imidazole frameworks (ZIFs) are a promising material for corrosion protection due to their microstructural and physicochemical properties. In this study, we proposed the electrodeposited ZIF-67 reinforced polypyrrole (PPY) coating (PPY/ZIF-67) for corrosion protection of 430 ferritic stainless steel (430SS). The morphology, microstructure, and anticorrosion behavior of the pristine PPY and hybrid PPY/ZIF-67 coating systems were characterized. The successful electrodeposition of ZIF-67 nanoparticles on the surface of the PPY layer resulted in a uniform distribution and a compact coating structure, which contributed to the overall uniformity of the coating and enhanced both the barrier and activity inhibition functions of the coating. The protective performance of PPY/ZIF-67 coatings was evaluated through electrochemical tests, the results indicated that the anticorrosion efficiency of PPY/ZIF-67 coating (with 0.4 mol/L pyrrole monomer content) reached to 99 %, and the coating demonstrated a durable corrosion protection ability (744 h) in 0.1 mol/L HCl solution. Such performance of can be attributed to the combined effect of the anodic protection provided by the inner PPY film, the active corrosion inhibiting properties of the ZIF-67 nanoparticle layer, and the hindrance of aggressive species by the compact coating structure over the prolonged service time.

Structure and corrosion properties of multilayer metal/nitride/oxide ceramic coatings formed on austenitic-martensitic steel by magnetron deposition

The design of protective coatings preventing the degradation and failure of austenitic steels in humid climate is a relevant issue. In this work, a conventional magnetron sputtering method was utilized in order to fabricate a four-layer Ni/Al-Si-N/Ni/Al-Si-O coating onto austenitic-martensitic steel. At the first stage of deposition, a three-layer coating was formed in an Ar+N2 atmosphere using a mosaic target (Ni or Al-Si), while the second stage included the deposition of the outer ceramic Al-Si-O layer in an Ar+O2 gas mixture. The studies of the structure, hardness, adhesion strength and electrochemical behavior (in 3.5 wt.% NaCl) of the «coating/steel» system were performed by means of X-ray Diffraction, electron microscopy, mechanical (indentation and scratch) tests and electrochemical impedance spectroscopy. The ceramic Al-Si-O layer exhibits an amorphous structure. The adjacent nickel layers have submicrocrystalline columnar grains. The ceramic Al-Si-N layer possesses a nanocrystalline columnar structure based on AlN + Si3N4 phases. Hardness behavior of the multilayer coating varies nonmonotonically due to a contribution of the soft amorphous phase in the upper surface layer and high-strength nanocrystalline phases in the underlying sublayers. It has been revealed that as-deposited multilayer coating decreases a corrosion rate of the substrate. The layered structure of the coating hinders the transport and diffusion of chloride ions to the substrate and decreases the corrosion rate of the substrate. However, a transport of chloride ions into the inner layers of the coating may occur through the microstructural defects preserved in the amorphous Al-Si-O layer. The scheme describing an initiation of corrosion damage and formation of corrosion products under critical corrosion conditions was proposed.

Chloride Corrosion Process of Concrete with Different Water-Binder Ratios under Variable Temperature Drying-Wetting Cycles.

In this paper, four water-binder ratios (w/b) of 0.29, 0.33, 0.39, and 0.46 were designed. A variable test temperature was implemented in the drying-wetting cycle test according to the temperature fluctuations in the actual service environment, and the constant temperature test was established as the control group. The mechanical properties and chloride corrosion resistance of concrete with different w/b ratios under variable temperature drying-wetting cycles, as well as the microstructure changes, phase composition, and damage mechanism inside the concrete, were investigated. The results showed that the mechanical properties of concrete increased first and then decreased with drying-wetting cycles increasing, whereas the chloride corrosion resistance continued to decline. A higher w/b exacerbated the deterioration of the concrete performance. A higher w/b increased the porosity, chloride diffusion depth, and chloride content, thus reducing the resistance of chloride corrosion. Compared with w/b = 0.29, the compressive strength, splitting tensile strength, mass, and relative dynamic elasticity modulus of w/b = 0.46 exposed to 60 drying-wetting cycles decreased by 54.50%, 52.44%, 0.96%, and 6.50%, respectively, while the porosity, peak chloride content, and erosion depth increased by 45.12%, 70.45%, and 45.00%. Compared with the drying-wetting cycle with a constant temperature, the cumulative damage caused by the drying-wetting cycle with a variable temperature was greater, resulting in more severe deterioration of concrete performance. The increase in the test temperature significantly accelerated the diffusion rate, penetration depth, and chemical binding capacity of chloride ions. After 60 drying-wetting cycles, the peak chlorine content and erosion depth of w/b = 0.46 under variable temperature cycles were 15.38% and 10.32% higher than those under a constant temperature, while the compressive strength, splitting tensile strength, mass, and relative dynamic elastic modulus were reduced by 7.76%, 14.81%, 0.33%, and 2.40%, respectively. Microscopic analysis confirmed that higher w/b and variable temperature cycles accelerated the decay of mechanical properties and the decline of chloride corrosion resistance. According to the numerical fitting analysis, the w/b should be 0.29~0.39 under the condition that the mechanical properties and chloride corrosion resistance of concrete are met.

High-quality recycled concrete aggregates developed through an integrated thermomechanical approach

This study demonstrates an integrated thermomechanical treatment process to produce high quality recycled concrete aggregate (RCA) for structural concrete. RCA is mechanically treated after 90 min of heating at 250 °C in this process. The material properties of RCA produced through 15 combinations of charges and drum revolutions are compared using a statistical method. The highest ranking of an RCA identifies it as a high-quality class. Concrete composed of 100% RCA (recycled aggregate concrete, RAC) has 1.7% higher compressive strength than natural aggregate concrete (NAC). RAC has tensile and flexural strengths of 0.95 and 1.03 in fraction of NAC. RAC meets durability criteria such as UPV greater than 4.4 km/s, rapid chloride ion penetration test (RCPT) less than 1000 C, electrical resistivity greater than 208 Ohm-m, and sorptivity closer to NAC. Water absorption and abrasion resistance are similar to or superior to those of NAC. Coherent and uniform surface morphology of RCA enhances the ITZ microstructure in RAC.