Aqueous Chloride Solutions Research Articles

Optimization of Matrix Components for Improved Catalytic Activities of Cellulase Immobilized on Biochar-Chitosan Beads

Bioethanol is a renewable energy that is gaining popularity globally. It’s biochemical production requires the use of enzyme, especially cellulase. Cellulase is an enzyme that catalyzes the degradation of cellulose and related polysaccharides which finds applications in food, textiles, detergents, biofuels etc. However, the worldwide use of cellulase is limited by its relatively high production costs and low biological activity. This study was design to locally produce biochar-chitosan beads at optimized conditions to immobilize cellulase for improved thermal and storage stability as well as ensure reusability of the enzyme so as to improve biological activity and avoid the continuous production of free cellulase thereby reducing the production cost. Biochar was produced by pyrolyzing sugarcane bagasse in a local airtight chamber for 1 hour. Beads were formed from different ratios of biochar and chitosan in varying concentrations of calcium chloride solution as generated by design expert software version 13. The beads were dried in an oven at 50 0C for 24 hours and functionalized in 25% glutaraldehyde (GDA). The beads were loaded with enzyme (10.06 µmole/min/mL) at room temperature (27 ± 3 oC). Enzyme activity, thermal stability, storage stability and reusability tests were carried out according to standard procedures. The half-life and activation energy were also evaluated. The result showed that the optimum activity of the loaded enzyme (2.63 µmole/min/mL) was obtained when 2.46 g of porous biochar was mixed with 2.48 g chitosan in 5 % Calcium chloride aqueous solution. The immobilized enzyme was able to maintain thermal stability between 30 oC and 70 oC while the activity for free enzyme started declining after 50 oC. Also, the activation energy for immobilized cellulase enzyme (23.17 KJ/mol) was lower than the activation energy (55.146 KJ/mol) for free cellulase. The half-life, when stored at ambient Temperature (27 ± 3 oC), for free enzyme was 0.4 days while the half-life for immobilized enzyme was 3.59 days. Therefore, cellulase immobilized on support locally produced at optimal conditions had improved catalytic properties when compared to the free enzyme. Hence, more indigenous materials and practices may be employed for a cost effective and cheaper industrial processes.

Effects of different freezing methods on muscle qualities and myofibrillar protein properties of red drum (Sciaenops ocellatus) during storage

The freezing of aquatic products without causing significant changes in quality is recently attracting much attention. In this study, the effects of air freezing (AF, -20 °C), blast freezing (BF, -35 °C), liquid nitrogen freezing (LNF), and immersion freezing (IF, -35 °C) by 20 % ethanol, 20 % propylene glycol, 10 % glycerol, and 10 % sodium chloride aqueous solutions, respectively, on muscle qualities and myofibrillar protein properties of the red drum were investigated. The results indicated that the freezing rate of IF was 2.66 cm/h, which was 6.33 times higher than that in AF groups. Compared with AF and BF, the ice crystals were smaller and more uniformly shaped, with properties of lower water migration and less texture softening after cryogenic liquid freezing of IF and LNF group aquatic products. Immersion freezing showed the same superiority in maintaining the freshness of fish fillets and retaining the protein structure as liquid nitrogen storage. Overall, IF has similar effects to LNF in maintaining muscle qualities and myofibrillar protein properties. This study describes a new freezing method that uses 20 % ethanol, 20 % propylene glycol, 10 % glycerol, and 10 % sodium chloride aqueous solutions as immersion freezing medium. The multi-compound freezing medium has the potential to be used for the freezing of aquatic products.

Synthesis of high-performance polymethylsilsesquioxane xerogels by improving acid catalytic conditions in aluminum chloride aqueous solution

Organic and inorganic acids are common catalysts to promote the hydrolysis of methyltrialkoxysilanes, but they are challenging to modulate the inherent CH3SiO1.5 backbone of polymethylsilsesquioxane (PMSQ) xerogels. Here, an aluminum chloride aqueous solution is proposed for the first time as an acid catalyst to enhance the hydrolysis of methyltriethoxysilane (MTES). This approach allows the PMSQ xerogels to have a more flexible [-Al-O-]m-[SiO]n backbone structure. The optimal concentration of aluminum chloride and surfactant cetyltrimethylammonium bromide in the MTES sol was 1.069 mmol/L and 0.885 mmol/L, respectively, endowing the as-synthesized PMSQ xerogel with a high compression strength of 0.450 MPa and maximum compression strain of 76.1%. Notably, the tiny incorporation of alumina phase (0.4 mol%) in the Si-O-Si backbone made the PMSQ xerogels hydrophobic up to 400 °C for 1 h in the air. The PMSQ xerogels possessed superior thermal insulation properties (32.0–38.0 mW/(m·K)) and could be processed into desired large-sized shapes.

Metal-Organic Framework for Aluminum based Energy Storage Devices: Utilizing Redox Additives for Significant Performance Enhancement.

There are various methods being tried to address the sluggish kinetics observed in Al-ion batteries (AIBs). They mostly deal with morphology tuning, but have led to limited improvement. A new approach is proposed to overcome this limitation. It focuses on the use of a redox additive modified electrolyte in combination with framework like materials, which have wider channels. The ordered microporous and interconnected framework of ZIF 67, with large surface area, effectively facilitates the diffusion of aluminum ions. Therefore, AIBs are able to exhibit a superior discharge capacity of 288 mAh g-1 at 0.2 A g-1 current density with robust cycling stability. The addition of potassium ferricyanide as a redox-active species in an aqueous solution of aluminum chloride (supporting electrolyte) leads to significant enhancement in the specific capacity with much higher cycling stability. Al-ion based BatCap devices can be assembled by using ZIF 67 as the cathode, ZIF 67 derived porous carbon as the anode, and a redox additive modified electrolyte. The BatCap device exhibits excellent energy density of 86 Wh kg-1 at a power density of 2 KW kg-1, which is higher than reported aqueous AIBs. The ex situ characterization clearly explains the unexplored mechanism of redox additives in AIBs.

Experimental investigation of a mixed desiccant solution of potassium formate and ionic liquid

Liquid desiccant technology is a promising energy-efficient alternative to conventional temperature and humidity control systems. In the quest to identify the optimal fluid for liquid desiccant systems, alternative desiccant solutions have been explored in terms of their feasibility and compatibility in dehumidification systems. This study proposes and characterises a new type of less expensive mixture of potassium formate (HCO2K) and 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]). This novel desiccant solution was investigated in terms of corrosiveness to metals, moisture absorption and desorption ability, cost-effectiveness compared to conventional desiccant solutions. The corrosiveness of desiccant solutions to copper-nickel, copper and steel was tested at room temperature and at 60 °C. Experiments were conducted in a climatic chamber with temperatures of 25–31 °C and relative humidities of 80–90% for the absorption process and temperatures of 50–70 °C and relative humidities of 20–30% for the desorption process to assess the moisture absorption and desorption capacities and mass fraction variations of the desiccant solutions. The mixed desiccant of HCO2K/[EMIM][OAc] in the ratio 60/10% wt. showed a moisture absorption capacity of 0.146 gH2O/gsol (compared to 0.18 gH2O/gsol for aqueous lithium chloride at 33.3% wt.) for a temperature and relative humidity of the climatic chamber of 25 °C and 90%, respectively. Its low corrosiveness, good moisture absorption and desorption capacity and higher cost-effectiveness make it a promising alternative to conventional desiccants, such as aqueous solutions of lithium chloride.

Range and sensitivity of 17O nuclear spin-lattice relaxation as a probe of aqueous electrolyte dynamics.

The study of electrolytic solutions is of relevance in many research fields, ranging from biophysics, materials, and colloid science to catalysis and electrochemistry. The dependence of solution dynamics on the nature of electrolytes and their concentrations has been the subject of many experimental and computational studies, yet it remains challenging to obtain a full understanding of the factors that govern solution behavior. Here, we provide additional insights into the behavior of aqueous solutions of alkali chlorides by combining 17O relaxation data with diffusion and viscosity data and contrast their behavior with 1H nuclear magnetic resonance relaxation data. The main findings are that 17O relaxation correlates well with viscosity data but not with diffusion data, while 1H relaxation correlates with neither. Certain ionic trends match known ion-specific series behavior, especially at high concentrations. Notably, we also examine the ranges of the interactions and conclude that the majority of the effects are tied to local water reorientation dynamics.

Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution: An electrochemical study

AbstractThe corrosion behavior of two different Cu–Al–Mn–Ni alloys, pseudoelastic and pseudoplastic, was studied in a 0.6 M sodium chloride aqueous solution by monitoring the open circuit potential for 100 h and characterizing the resulting corrosion products. Electrochemical impedance spectroscopy analysis detected three processes related to the electrochemical double layer, a passive film and a diffusive contribution associated with the dissolution/precipitation of corrosion products. Potentiodynamic scans revealed a cathodically controlled corrosion mechanism and the presence of active–passive behavior at anodic potentials for both alloys studied. Polarization of the samples at selected potentials in the anodic branch allowed the investigation of the reactions involved, highlighting an improved corrosion resistance of the pseudoelastic alloy. The corrosion rates of the pseudoelastic and pseudoplastic alloys, after 100 h of immersion, were determined to be 0.007 and 0.011 mmpy, respectively. The post‐experiment characterization was carried out by means of scanning electron microscopy, micro‐Raman spectroscopy and X‐ray diffraction, supporting the electrochemical results.

Surface Acoustic Wave Resonator Chip Setup for the Elimination of Interfering Conductivity Responses.

A surface acoustic wave (SAW) resonator chip setup is presented that eliminates interfering signal responses caused by changes in the electrical environment of the surrounding media. When using a two-port resonator, applying electrically shielding layers between the interdigital transducers (IDTs) can be challenging due to the limited dimensions. Therefore, a layered setup consisting of an insulating polymer layer and a conductive gold layer was preferred. The SAW resonators were provided with polycarbonate housings, resulting in SAW resonator chips. This setup enables easy application of a wide range of coatings to the active part of the resonator surface, while ensuring subsequent electrical and fluidic integration of the resonator chips into a microfluidic array for measurements. The signal responses of uncoated SAW resonators and those with polymer coatings with and without a gold layer were tested with aqueous potassium chloride (KCl) solutions up to 3 mol/L, corresponding to conductivities up to 308 mS/cm. The use of a polymer coating at the thickness of the first Love mode resonance and a conductive gold layer completely reduced the electrical impact on the SAW resonator signal response, making small signals resulting from changes in viscosity and density of the KCl solutions visible.

The Chemistry of Spinel Ferrite Nanoparticle Nucleation, Crystallization, and Growth.

The nucleation, crystallization, and growth mechanisms of MnFe2O4, CoFe2O4, NiFe2O4, and ZnFe2O4 nanocrystallites prepared from coprecipitated transition metal (TM) hydroxide precursors treated at sub-, near-, and supercritical hydrothermal conditions have been studied by in situ X-ray total scattering (TS) with pair distribution function (PDF) analysis, and in situ synchrotron powder X-ray diffraction (PXRD) with Rietveld analysis. The in situ TS experiments were carried out on 0.6 M TM hydroxide precursors prepared from aqueous metal chloride solutions using 24.5% NH4OH as the precipitating base. The PDF analysis reveals equivalent nucleation processes for the four spinel ferrite compounds under the studied hydrothermal conditions, where the TMs form edge-sharing octahedrally coordinated hydroxide units (monomers/dimers and in some cases trimers) in the aqueous precursor, which upon hydrothermal treatment nucleate through linking by tetrahedrally coordinated TMs. The in situ PXRD experiments were carried out on 1.2 M TM hydroxide precursors prepared from aqueous metal nitrate solutions using 16 M NaOH as the precipitating base. The crystallization and growth of the nanocrystallites were found to progress via different processes depending on the specific TMs and synthesis temperatures. The PXRD data show that MnFe2O4 and CoFe2O4 nanocrystallites rapidly grow (typically <1 min) to equilibrium sizes of 20-25 nm and 10-12 nm, respectively, regardless of applied temperature in the 170-420 °C range, indicating limited possibility of targeted size control. However, varying the reaction time (0-30 min) and temperature (150-400 °C) allows different sizes to be obtained for NiFe2O4 (3-30 nm) and ZnFe2O4 (3-12 nm) nanocrystallites. The mechanisms controlling the crystallization and growth (nucleation, growth by diffusion, Ostwald ripening, etc.) were examined by qualitative analysis of the evolution in refined scale factor (proportional to extent of crystallization) and mean crystallite volume (proportional to extent of growth). Interestingly, lower kinetic barriers are observed for the formation of the mixed spinels (MnFe2O4 and CoFe2O4) compared to the inverse (NiFe2O4) and normal (ZnFe2O4) spinel structured compounds, suggesting that the energy barrier for formation may be lowered when the TMs have no site preference.

Sustainable, Low‐Cost Sorbents Based on Calcium Chloride‐Loaded Polyacrylamide Hydrogels

AbstractSorbents are promising materials for applications in atmospheric water harvesting, thermal energy storage, and passive cooling, thereby addressing central challenges related to water scarcity and the global energy transition. Recently, hygroscopic hydrogel composites have emerged as high‐performance sorbents. However, many of these systems are fabricated with unsustainable and costly sorbent materials, which hinders their wide deployment. Here, the synthesis of high‐performance, cost‐efficient polyacrylamide hydrogels loaded with unprecedented amounts of calcium chloride is demonstrated. To this end, the swelling procedure of polyacrylamide hydrogels in aqueous calcium chloride solutions is optimized. The achievable salt loading in the hydrogel is characterized as a function of temperature, calcium chloride concentration in the swelling solution, and the hydrogel preparation conditions. The obtained hydrogel‐salt composites are shown to be stable under repeated sorption‐desorption cycling and enable water uptakes of 0.92 and 2.38 grams of water per gram of dry materials at 30% and 70% relative humidity, respectively. The resulting cost‐performance ratio substantially exceeds lithium chloride‐based systems. Further, the mechanistic insights on hydrogel salt interactions can guide the design of sustainable and low‐cost sorbent materials for future applications in water and energy.

Role of Oxidants in Metal Extraction from Sulfide Minerals in a Deep Eutectic Solvent.

Metallurgical applications of deep eutectic solvents (DESs), known as ionometallurgy, have received significant research attention in recent years. While many studies claim that DESs are generally green and enhance process efficiency, others believe that industrial applications of ionometallurgy are generally not viable. Here, we report on leaching experiments of a sulfide flotation concentrate using ethaline, a chloride-based DES, in the presence of common oxidants. Following a mineral-based approach, we compare results with those obtained from aqueous chloride solutions to assess the influence of the leaching medium. We aim to contribute to a basic understanding of key differences between DESs and aqueous solutions and hope that this will help to make informed decisions about the suitability of DESs for leaching applications. Experiments were performed on a feed concentrate comprising a mixture of sulfide minerals along with substantial concentrations of Au, Ag, and Te. We found similar leaching behaviors for ethaline and aqueous solutions in nonoxidative leaching. However, when oxidizing agents were introduced, ethaline exhibited higher leaching efficiencies. Notably, the oxidation rate of pyrite in ethaline was very low, while chalcopyrite exhibited high oxidation rates. Furthermore, the results highlight significant variations in leaching rates depending on the type of oxidant, with the highest rate observed for I2, followed by CuCl2, and FeCl3. H2O2 and O2 were less effective. The leaching of gold-silver tellurides was possible in ethaline. This could be of particular significance, given that Au-Ag-Te compounds pose challenges in conventional cyanide treatment.

Experimental measurement and thermodynamic modeling of hydrate stability conditions in the methane + cyclopentane + tetra-n‑butyl ammonium chloride (TBAC) aqueous solution system

The present study investigates hydrate dissociation conditions in methane + cyclopentane (CP) and tetra-n‑butyl ammonium chloride (TBAC) aqueous solution. The experimental work was done using an isochoric vessel with varying compositions of the promoters in the pressure and temperature ranges of (1.42 to 4.90) MPa and (291.2 to 298.9) K, respectively. The methane hydrate dissociation pressure was predicted by the Gibbs minimization method. The findings denote that adding CP to the TBAC-containing system shifts the hydrate dissociation temperature of methane to higher values. The results also show an average increase of 12, 9, 5, and 3 K in hydrate dissociation temperature for 5, 10, 20, and 30 wt% TBAC in aqueous solution within the pressures. These results can be caused by the existence of more dodecahedral cages that are inhabited by methane. Thus, it makes hydrates more stable and increases the temperature of hydrate dissociation. On the other hand, adding TBAC to CP containing system has an inhibitor effect. The methane hydrate dissociation temperature was not changed sensibly when a 5 wt% TBAC was added to CP containing system. When the addition of the TBAC weight percentage to CP containing system is increased to 10, the average hydrate dissociation temperature decreases by 1 K within the pressures. When adding 20 and 30 wt% TBAC to CP containing system an average decrease of 2 K and 3 K in the hydrate dissociation temperature is resulted, respectively, within the pressures. The reduction in the hydrate dissociation temperatures can be attributed to salting-out and ion clustering. The experimental data and modeling results for the hydrate dissociation pressures exhibit an AARD of 2.4 %.

Interfacial bonding and corrosion inhibition of 2-mercaptobenzimidazole organic films formed on copper surfaces under electrochemical control in acidic chloride solution

The interfacial bonding and the layered structure of 2-mercaptobenzimidazole (2-MBI) organic films adsorbed on electrochemically controlled copper surfaces and their corrosion inhibition effects in acidic chloride aqueous solution were investigated using an integrated approach of electrochemical methods and advanced surface analyses by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. It is shown that organic films formed on the copper surfaces are bi-layered with a chemisorbed inner layer and a physisorbed outer layer. In the chemisorbed inner layer, 2-MBI is bonded primarily by its nitrogen atoms with metallic and oxidized copper surfaces. Sulphur atoms are also involved in the bonding mechanism when metallic copper is directly accessible to the 2-MBI molecules. The initial presence of native copper oxides at the interface promotes the formation of Cu(I)-2-MBI metal-organic complexes in the chemisorbed inner layer using cathodic reduction to dissociate the oxide. Metal-organic complexes also form upon anodic polarisation due to Cu(I) ions generated by oxidation of the copper metal. 2-MBI effectively inhibits copper anodic dissolution in varying degrees, between 84% and 93%, depending on the pre-treatment used for the formation of the organic bi-layers. An enhanced protection of the substrate is obtained by adsorbing the 2-MBI inhibitor on an initially oxide-free surface, which is achieved by cathodic pre-treatment in absence of the inhibitor followed by 1 hour exposure to the inhibitor.

Sonochemical synthesis of SnS and SnS2 quantum dots from aqueous solutions, and their photo- and sonocatalytic activity

Our study reports the ultrasound-assisted synthesis of SnS and SnS2 in the form of nanoparticles using aqueous solutions of respective tin chloride and thioacetamide varying sonication time. The presence of both compounds is confirmed by powder X-ray diffraction, energy-dispersive X-ray spectroscopy, as well as Raman and FT-IR spectroscopic techniques. The existence of nanoparticles is proven by powder X-ray diffraction investigation and by high resolution transmission electron microscopy observations. The size of nanocrystallites are in the range of 3–8 nm and 30 50 nm for SnS, and 1.5–10 nm for SnS2. X-ray photoelectron spectroscopy measurements, used to investigate the chemical state of tin and sulphur atoms on the surface of nanoparticles, reveal that they are typically covered with tin on the same oxidation degree as respective bulk compound. Values of optical bandgaps of synthesized nanoparticles, according to the Tauc method, were 2.31, 1.47 and 1.05 eV for SnS (60, 90 and 120 min long synthesis, respectively), and 2.81, 2.78 and 2.70 eV for SnS2 (60, 90 and 120 min long synthesis, respectively). Obtained nanoparticles were utilized as photo- and sonocatalysts in the process of degradation of model azo-dye molecules by UV-C light or ultrasound. Quantum dots of SnS2 obtained under sonication lasting 120 min were the best photocatalyst (66.9 % color removal), while quantum dots of SnS obtained under similar sonication time were the best sonocatalyst (85.2 % color removal).

Corrosion Behavior of Chromium Conversion Coated AZ91C Magnesium Alloy in Sodium Borate and Sodium Chloride Aqueous solutions

A chromium containing film was deposited on the surface of the investigated AZ91C magnesium alloy by chemical conversion process. The microstructure and surface morphology of the as- received and coated alloys were initially characterized by optical microscope. The corrosion behavior of AZ91C before and after coating was studied through weight loss technique by immersion in 3.5% NaCl and borate solutions at various concentrations and pH values. Surface corrosion products and passivation films were analyzed by X-ray diffraction. The obtained results showed that AZ91C coated with chromium conversion coating exhibits enhanced corrosion resistance, furthermore X-ray diffraction revealed that corrosion damage was mainly caused by formation of crystalline phase Mg(OH)2. The addition of borate with different concentration enhanced the protection with efficiency of 86% recorded at 0.2N sodium borate concentration and 3.5% NaCl.Corrosion behavior

Changes in Mechanism and Transition State Structure for Solvolysis Reactions of Ring Substituted Benzyl Chlorides in Aqueous Solution.

Rate and product data are reported for the solvolysis reactions of twenty-seven mono, di (3,4) and tri (3,4,5) ring-substituted benzyl chlorides. The first order rate constant for solvolysis in 20% acetonitrile in water decrease from k solv = 2.2 s-1 for 4-methoxybenzyl chloride to 1.1 x 10-8 s-1 for 3,4-dinitrobenzyl chloride. The product rate constant ratios k MeOH/k TFE for solvolysis in 70/27/3 (v/v/v) HOH/TFE/MeOH range from a minimum of k MeOH/k TFE = 8 to a maximum of 110. The rate data were fit to a four-parameter Hammett equation that separates the resonance and polar effects of the aromatic ring substituents on the reaction rate. Increases in the values of the Hammett reaction constants and are observed as the substituent constants or are increased. A sharp decrease in the product selectivity k MeOH/k TFE = 26 for stepwise solvolysis of 4-methoxybenzyl chloride is observed as electron-withdrawing meta-substituents are added to 4-methoxybenzyl ring due to a Hammond-effect on the position of the transition state for solvent addition to the substituted 4-methoxybenzyl carbocation reaction intermediates. Sharp increases in the selectivity k MeOH/k TFE are observed with decreasing reactivity of other 3,4,5-subsituted benzyl chlorides due to anti-Hammond shifts on a two-dimensional More-O'Ferrall reaction coordinate diagram in the position of the transition state for a concerted solvolysis reaction.

Kinetic analysis of CO2 hydrate formation in the aqueous solutions of transition metal chlorides

AbstractCO2 hydrate technology can be applied to seawater desalination. However, the kinetics of CO2 hydrate formation were inhibited in the aqueous solution with inorganic salts, and the kinetic mechanism of CO2 hydrate formation for inorganic salts with different metal cations and anions was still unclear. In this work, CO2 hydrate nucleation and growth were studied in aqueous solutions of metal chlorides. Instead of Na+ and K+ ions, CO2 hydrate nucleation was promoted in the presence of Ni2+, Mn2+, Zn2+ and Fe3+ ions due to the co‐ordination bonds between transition metal ions and water molecules to enhance the formation of the critical crystal nuclei. The induction time was increased by 61.1% in aqueous solution with 0.32 mol/L NaCl, while it was shortened by 55.6% in FeCl3 aqueous solution at the same concentration of Cl− anions. In the process of CO2 hydrate growth, Cl− ions played a more important role than the metal ions in affecting the stability of CO2 hydrate cages. The gas storage capacity was reduced by 10.3% in the presence of NaCl, and was lower than that of other metal chlorides. Cl− anions were absorbed on the hydrate surface and involved in hydrate cages to inhibit the hydrate growth due to the hydrogen bonds between the Cl− ions and water molecules of the hydrate cages. © 2024 Society of Chemical Industry and John Wiley &amp; Sons, Ltd.

Novel biologically active paddlewheel-like palladium thiocyanate complex catalyzed cyanation of alkyl bromide utilizing Q-tube system: A green perspective

A novel paddlewheel-like complex of [Pd(SCN)2(3-Acpy)2], (1) was produced at ambient temperature by adding an aqueous solution of palladium chloride to an aqueous acetonitrile solution of 3-acetylpyridine (3-Acpy) and potassium thiocyanate. Elemental analysis, Fourier-transform infrared (FT-IR), ultraviolet–visible (UV–vis), and nuclear magnetic resonance (NMR) spectroscopic methods were used to characterize complex 1 comprehensively. Single crystal X-ray diffraction was used to analyze the crystal structure of complex 1. The palladium atom is bonded to two 3-Acpy ligands and two thiocyanates groups in trans mode giving square planer geometry in complex 1. The discrete units of paddlewheel-like complex 1 through hydrogen bonding extend to form a 3D supramolecular network structure. The synthesized and characterized new palladium complex 1 was utilized as a precatalyst for the cyanation of alkyl bromide using potassium ferrocyanide as a benign cyanide source reagent. The suggested catalytic test reaction under high-pressure conditions via a Q-tube system in green solvent cyclopentyl methyl ether introduced high yields and a short reaction time. Moreover, the cytotoxic activity of complex 1 was assessed using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay against HePG-2 of liver cancer and MCF7 of breast cancer cell lines. According to the findings, complex 1 has significant strong activity against the cancer cell lines HePG-2 and MCF-7. Additionally, the luminescence spectra of complex 1 were investigated.

Examination of the Effects of Taheri Consciousness Fields on the Physicochemical Properties of Water in Pure and Normal Saline Forms

In this issue, water, as a crucial molecule in Earth's structure and the formation of life, has been selected. The application of TCFs in diverse experiments on water molecules, in both normal saline and pure forms, provides the opportunity to elucidate the effects of TCFs on the level of these vital molecules. In this issue, besides examining the effects of these fields on various properties of pure water molecules, a 0.9% sodium chloride aqueous solution, commonly known as normal saline, has also been utilized. This solution is considered the most abundant aqueous solution in nature and a medicinal compound for humans. These studies investigate some of the physical and chemical properties of water, such as pH, temperature, electrical conductivity, optical absorption, and light scattering, under the treatment of TCFs in comparison to the control group.

Interfacial structure and transport properties of concentrated lithium chloride solutions under an electrostatic field

Efficient moisture exchange between liquid desiccants and air is essential for optimizing dehumidification and air-conditioning systems, with the interfacial layer playing a critical role. This work investigates the influence of electrostatic fields (E-fields) on the structural and transport properties of the liquid-vapor interface between aqueous lithium chloride solutions and air at a microscopic scale using molecular dynamics (MD) simulations. Our research reveals that negative normal E-fields deplete ions within the interfacial layer, weakening their interactions with water molecules. Conversely, positive normal E-fields enrich surface ions, attracting a higher concentration of water molecules to the interface. The E-field enhances interactions between water molecules, increasing hydrogen bonds (H-bonds) at the interface. This weakens cohesion between water molecules and the liquid phase, ultimately reducing surface tension and the associated interfacial free energy barrier, facilitating the departure of water molecules from the liquid phase. Negative normal E-fields demonstrate greater advantages due to their pronounced alteration of the interface structure and the polarization of water molecules.