Chiral Diols Research Articles

Conformational Selection in Enzyme-Catalyzed Depolymerization of Bio-based Polyesters.

Enzymatic degradation of polymers holds promise for advancing towards a bio-based economy. However, bulky polymers presents challenges in accessibility for biocatalysts, hindering depolymerization reactions. Beyond the impact of crystallinity, polymer chains can reside in different conformations affecting binding efficiency to the enzyme. We previously showed that the gauche and trans chain conformers associated with crystalline and amorphous regions of the synthetic polyethylene terephthalate (PET) display different affinity to PETase, thus affecting the depolymerization rate. However, structural-function relationships for biopolymers remain poorly understood in biocatalysis. In this study, we explored biodegradation of by-us previously synthesized bio-polyesters made from a rigid bicyclic chiral terpene-based diol and copolymerized with various renewable diesters. Herein, four of those polyesters spanning from semi-aromatic to aliphatic were subjected to enzymatic degradations in concert with induced-fit docking (IFD) analyses. Our findings demonstrate the importance of conformational selection in enzymatic depolymerization of biopolymers. A straight or twisted conformation of the polymer chain is crucial in biocatalytic degradation by showing different affinities to enzyme ground-state conformers. This work highlights the importance of considering the conformational match between the polymer and the enzyme to optimize the biocatalytic degradation efficiency of biopolymers, providing valuable insights for the development of sustainable bioprocesses.

Asymmetric Synthesis of Trisubstituted Vicinal Diols through Copper(I)‐Catalyzed Diastereoselective and Enantioselective Allylation of Ketones with Siloxypropadienes

AbstractChiral trisubstituted vicinal diols are a type of important organic compounds, serving as both common structure units in bioactive natural products and chiral auxiliaries in asymmetric synthesis. Herein, by using siloxypropadienes as the precursors of allyl copper(I) species, a copper(I)‐catalyzed diastereoselective and enantioselective reductive allylation of ketones was achieved, providing both syn‐diols and anti‐diols in good to excellent enantioselectivity. DFT calculations show that cis‐γ‐siloxy‐allyl copper species are generated favorably with either 1‐TBSO‐propadiene or 1‐TIPSO‐propadiene. Moreover, the steric difference of TBS group and TIPS group distinguishes the face selectivity of acetophenone, leading to syn‐selectivity for 1‐TBSO‐propadiene and anti‐selectivity for 1‐TIPSO‐propadiene. Easy transformations of the products were performed, demonstrating the synthetic utility of the present method. Moreover, one chiral diol prepared in the above transformations was used as a suitable organocatalyst for the catalytic asymmetric reductive self‐coupling of aldimines generated in situ with B2(neo)2.

Asymmetric Synthesis of Trisubstituted Vicinal Diols through Copper(I)-Catalyzed Diastereoselective and Enantioselective Allylation of Ketones with Siloxypropadienes.

Chiral trisubstituted vicinal diols are a type of important organic compounds, serving as both common structure units in bioactive natural products and chiral auxiliaries in asymmetric synthesis. Herein, by using siloxypropadienes as the precursors of allyl copper(I) species, a copper(I)-catalyzed diastereoselective and enantioselective reductive allylation of ketones was achieved, providing both syn-diols and anti-diols in good to excellent enantioselectivity. DFT calculations show that cis-γ-siloxy-allyl copper species are generated favorably with either 1-TBSO-propadiene or 1-TIPSO-propadiene. Moreover, the steric difference of TBS group and TIPS group distinguishes the face selectivity of acetophenone, leading to syn-selectivity for 1-TBSO-propadiene and anti-selectivity for 1-TIPSO-propadiene. Easy transformations of the products were performed, demonstrating the synthetic utility of the present method. Moreover, one chiral diol prepared in the above transformations was used as a suitable organocatalyst for the catalytic asymmetric reductive self-coupling of aldimines generated in situ with B2(neo)2.

New Strategy for the Synthesis of Some Valuable Chiral 1,3-Diols with High Enantiomeric Purity: New Organocatalyst, Asymmetric Aldol Reaction, and Reduction.

Chiral 1,3-diols are highly valuable molecules used in industries such as pharmaceuticals, cosmetics, and agriculture. Therefore, in this study, a new strategy was developed to synthesize enantiomerically pure (>99% ee) 1,3-diols. New chiral 1,3-diols (5a-5q) with high enantiomeric purity were synthesized from aldol products chiral 1,3-keto alcohols (4a-4q), which are aldol products with different structures. Chiral 1,3-keto alcohols (4a-4q) were synthesized by a new asymmetric aldol method in the first step. This method was developed using a new proline-derived organocatalyst (3g) and Cu(OTf)2 as an additive in DMSO-H2O for the first time. Almost >99% ee was obtained using our developed aldol procedure. In the second step, original chiral diols (5a-5q) of high enantiomeric purity were obtained by asymmetric reduction of chiral keto alcohols with chiral oxazaborolidine reagents. In this way, a two-step asymmetric reaction was developed for chiral 1,3-diol enantiomers with high enantiomeric purity. The structures of all the original chiral compounds obtained were elucidated by infrared and nuclear magnetic resonance spectroscopy, mass spectrometry, and elemental analysis methods. Their enantiomeric excesses were determined by the chiral high-performance liquid chromatography method. Both keto alcohols and their corresponding chiral diols synthesized can be used as chiral starting materials and chiral source materials or intermediates in the synthesis of many biologically active molecules, or they can be used as chiral ligands in asymmetric synthesis, serving as organocatalysts.

Synthesis of Boronic Esters from Organometallic Reagents and Bis(pinacolato)diboron.

Synthesis of alkyl, aryl, and vinyl boronic esters carrying various chiral and achiral diol-protecting groups were synthesized starting from the corresponding alkyl, aryl, and vinyl lithium or Grignard reagents. Good to excellent yields were obtained for a large range of substrates. The reaction can be conducted in a gram scale to obtain the product over 80 % yield. This approach provides direct access to neopentyl, pinene, and other boronic esters that are difficult to achieve. Using trimethoxyborane or 2-isopropoxy pinacolboronic ester. Detailed mechanistic studies have been conducted to understand the mechanism behind the formation of boronic ester starting from organometallic reagents.

Asymmetric permanganate dihydroxylation of enoates: substrate scope, mechanistic insights and application in bicalutamide synthesis

Chiral cinchoninium catalysed permanganate dihydroxylation of enoates with different substitution types, including challenging tetrasubstituted ones, provides good yields of chiral vicinal diols in up to 98% ee.

Biosynthesis of chiral diols from alkenes using metabolically engineered type II methanotroph

Methanotrophs are environmentally friendly microorganisms capable of converting gas to liquid using methane monooxygenases (MMOs). In addition to methane-to-methanol conversion, MMOs catalyze the conversion of alkanes to alcohols and alkenes to epoxides. Herein, the efficacy of epoxidation by type I and II methanotrophs was investigated, and type II methanotrophs were observed to be more efficient in converting alkenes to epoxides. Subsequently, three (Epoxide hydrolase) EHs of different origins were overexpressed in the type II methanotroph Methylosinus trichosporium OB3b to produce 1,2-diols from epoxide. Methylosinus trichosporium OB3b expressing Caulobacter crescentus EH produced the highest amount of (R)-1,2-propanediol (251.5 mg/L) from 1-propene. These results demonstrate the possibility of using methanotrophs as a microbial platform for diol production and the development of a continuous bioreactor for industrial applications.

Atropselektive Silylierung von 1,1′‐Biaryl‐2,6‐diolen mittels chiraler gegenaniondirigierter Desymmetrisierung und anschließender Verbesserung durch kinetische Racematspaltung

AbstractEs wird über eine desymmetrisierende Silylierung von aromatischen Diolen berichtet. Die zuvor unbekannte asymmetrische Silyletherbildung von Phenolderivaten wird mit der List'schen gegenaniondirigierten Silylierungsmethode erreicht. Ein silyliumionartiges Siliciumelektrophil, welches aus der Paarung eines Allylsilans und eines Imidodiphosphorimidats (IDPi) hervorgeht, erlaubt eine enantioselektive Unterscheidung von achiralen 1,1′‐Biaryl‐2,6‐diolen. Die Enantioselektivität dieser Desymmetrisierung wird zusätzlich durch eine nachgeschaltete kinetische Racematspaltung verbessert, indem das monosilylierte Mindermengenenantiomer in das entsprechende, abermals achirale bissilylierte Diol überführt wird.

SPSiPs, a Class of Diphosphine Ligands Based on SPSiOL with a Large Dihedral Angle

The development and the synthetic applications of a novel class of diphosphine ligands (SPSiPs) based on chiral spirosilabiindane diol (SPSiOL) are presented. Starting from SPSiOL, the diphosphine ligands could be readily prepared in three steps with high efficiency. This novel class of diphosphine ligands features rigid configuration, a large dihedral angle, a large P-M-P angle, and a long P-P distance. The potentials of SPSiPs in asymmetric catalysis have also been preliminarily disclosed.

Synthesis of a C2-Symmetric Chiral Borinic Acid and Its Application in Catalytic Desymmetrization of 2,2-Disubstituted-1,3-Propanediols.

Notwithstanding the common use of boronic acids in catalysis, the design and synthesis of efficient chiral boronic acids remains a formidable challenge. Herein we disclose a rational design and a concise synthesis of a series of novel C2-symmetric disubstituted boronic acids, or borinic acids. Chiral borinic acids have been found to be excellent agents that can achieve highly enantioselective desymmetrization of 2,2-disubstituted-1,3-propanediols, providing chiral diols with a quaternary stereocenter, which has been regarded in recent years as challenging. A wide range of substrates are tolerated in this reaction, providing a series of chiral diols with high enantioselectivity. The presence of the tetracoordinate borinate in the catalytic cycle has been proven by 11B NMR studies, and a stereocontrol model has been proposed.

Lipase-catalyzed two-step transesterification of diols: Estimation of selectivities

Reactions for the lipase-catalyzed kinetic resolution of chiral diols or the desymmetrization of achiral meso-diols involve two alternative routes, each of which contains two steps. During such reactions, up to four different nucleophiles compete to attack the acyl-enzyme intermediate of the catalytic cycle. The selectivities of the lipase for these different nucleophiles determines the success of the desymmetrization or resolution process and are important parameters for time-based mathematical models of these processes. Current methods for estimating these selectivities are not sufficiently accurate. In the current work, we develop a new approach to determining selectivities in lipase-catalyzed desymmetrization or resolution reactions with diols. The method is based on a model in which the only parameters are selectivities. We demonstrate the application of the method using literature data for three case studies of increasing complexity: (i) the two-step acetylation of phlorizin; (ii) the kinetic resolution of racemic 1,3-butanediol and (iii) the two-step desymmetrization of a meso-diol to produce a monoacetylated diol that is a key intermediate in the synthesis of biotin. We demonstrate the advantages of our estimation method over previously proposed estimation methods. The selectivities estimated by our method will be important parameters in models describing the desymmetrization and resolution of diols.

Sharpless Asymmetric Dihydroxylation: An Impressive Gadget for the Synthesis of Natural Products: A Review.

Sharpless asymmetric dihydroxylation is an important reaction in the enantioselective synthesis of chiral vicinal diols that involves the treatment of alkene with osmium tetroxide along with optically active quinine ligand. Sharpless introduced this methodology after considering the importance of enantioselectivity in the total synthesis of medicinally important compounds. Vicinal diols, produced as a result of this reaction, act as intermediates in the synthesis of different naturally occurring compounds. Hence, Sharpless asymmetric dihydroxylation plays an important role in synthetic organic chemistry due to its undeniable contribution to the synthesis of biologically active organic compounds. This review emphasizes the significance of Sharpless asymmetric dihydroxylation in the total synthesis of various natural products, published since 2020.

Enzymatic (2R,4R)‐Pentanediol Synthesis – “Putting a Bottle on the Table”

Abstract(2R,4R)‐Pentanediol is an interesting precursor for the synthesis of chiral ligands. A ketoreductase (KRED) was employed for the asymmetric reduction of acetylacetone to this diol. Biocatalysis often suffers from low concentrations of hydrophobic substrates and low stability of the enzyme in unconventional media. Here, we present an engineered KRED variant applicable in a neat substrate system, including upscaling to the multi‐liter scale and downstream processing (DSP). Our engineered KRED applied in a neat substrate system is a powerful technique for the synthesis of chiral diols yielding product concentrations of 208 g L−1.

Mechanochemical asymmetric three-component Mannich reaction involving unreactive arylamines.

We report here a mechanochemical protocol for an asymmetric three-component Mannich reaction involving unreactive arylamines with simple cyclic ketones and arylaldehydes catalyzed by (S)-proline with a chiral diol. In this mechanochemical protocol, ball milling enables reaction acceleration and enantioselectivity control. The reported asymmetric three-component Mannich reactions usually involve reactive arylamines such as p-anisidine and phenylamine, while the catalytic asymmetric Mannich reactions involving unreactive arylamines in solution did not proceed smoothly or gave low yields and enantioselectivities. However, the use of ball-milling techniques overcomes the deficiency of the batch systems in solution and avoids the use of toxic organic solvents. The desired products were obtained in moderate-to-good yields (49%-80%) with good-to-high enantioselectivities (up to 99% ee). This is the first example of a mechanochemically activated catalytic asymmetric three-component Mannich reaction involving unreactive arylamines.

Synthesis and evaluation of simple multimers based on biosourced central cores as donor materials for photovoltaic applications

Arylamine-based push–pull molecules were successfully grafted onto various chiral diols (isomannide and isosorbide) or glycerol moieties, used as central biosourced cores, for the preparation of multichromophoric materials.

Effective Production of Selected Dioxolanes by Sequential Bio- and Chemocatalysis Enabled by Adapted Solvent Switching.

Most combinations of chemo- and biocatalysis take place in aqueous media or require a solvent change with complex intermediate processing. Using enzymes in the same organic solvent as the chemocatalyst eliminates this need. Here, it was shown that a complete chemoenzymatic cascade to form dioxolanes could be carried out in a purely organic environment. The result, including downstream processing, was compared with a classical mode, shifting solvent. First, a two-step enzyme cascade starting from aliphatic aldehydes to chiral diols (3,4-hexanediol and 4,5-octanediol) was run either in an aqueous buffer or in the potentially biobased solvent cyclopentyl methyl ether. Subsequently, a ruthenium molecular catalyst enabled the conversion to dioxolanes [e. g., (4S,5S)-dipropyl-1,3-dioxolane]. Importantly, the total synthesis of this product was not only highly stereoselective but also based on the combination of biomass, CO2 , and hydrogen, thus providing an important example of a bio-hybrid chemical.

Design and Synthesis of a Ferrocene-Based Diol Library and Application in the Hetero-Diels-Alder Reaction.

Diol scaffolds have been utilized as highly effective catalysts and ligands in a wide range of catalytic asymmetric transformations. For scaffolds to be successful as broadly used motifs, they should be prepared cheaply through facile routes and be easily handled. Herein, the synthesis of a family of planar chiral diols based on a modular and robust three-step route is described, which yields catalytically active diols in >99 % de and >99 % ee, with up to seven different chiral elements. These diols have been characterized by X-ray crystallographic analysis, which provides clear evidence for the likely transition state when applied in the asymmetric hetero-Diels-Alder reaction. Without altering the stereochemistry of the catalyst backbone, it is possible to access both enantiomers of the product by varying the substitution of the catalyst at the α-position.

Expansion and Compression of a Helicate with Central Diol Units as Stereocontrolling Moieties

The dicatechol ester ligand 2-H4 forms the compressed helicate Li4[(2)3 Ti2] which upon removal of the internally bound lithium cations expands. In the compressed form, the chiral diol units control the stereochemistry of the complex which is lost upon expansion of the system.

Pseudo-resonance structures in chiral alcohols and amines and their possible aggregation states.

We now report that some chiral compounds, like alcohols, which are not sterically hindered atropisomers nor epimer mixtures, exhibit two sets of simultaneous NMR spectra in CDCl3. Some other chiral alcohols also simultaneously exhibit two different NMR spectra in the solid state because two different conformers, A and B had different sizes because their corresponding bond lengths and angles are different. These structures were confirmed in the same solid state by X-ray. We designate these as pseudo-resonance for a compound exhibiting several different corresponding lengths that simultaneously coexist in the solid state or liquid state. Variable-temperature NMR, 2D NMR methods, X-ray, neutron diffraction, IR, photo-luminesce (PL) and other methods were explored to study whether new aggregation states caused these heretofore unknown pseudo-resonance structures. Finally, eleven chiral alcohols or diols were found to co-exist in pseudo-resonance structures by X-ray crystallography in a search of the CDS database.

The Rational Design and Atroposelective Synthesis of Axially Chiral C2-Arylpyrrole-Derived Amino Alcohols.

Axially chiral biaryl diols have achieved great success in asymmetric catalysis. By contrast, axially chiral biaryl amino alcohols are far less developed. Herein, we have rationally designed a versatile C1 -symmetric biaryl amino alcohol scaffold 1-(1-amino-pyrrol-2-yl)naphthalen-2-ol (NPNOL) on the basis of axially chiral C2-arylpyrrole framework. For its enantioselective synthesis, the chiral phosphoric acid-catalyzed asymmetric Attanasi reaction between 1,3-dicarbonyl compounds and azoalkenes had been established. By using this practical method, a wide range of NPNOLs were readily prepared in high yields and excellent atroposelectivities (38 examples, up to 89 % yield and 99 % ee). DFT calculations were performed to reveal the reaction mechanism and the origins of the enantioselectivity. The easy transformations of NPNOL-derived products into organocatalysts/ligands and their preliminary applications in asymmetric catalytic reactions demonstrated the promising utility of NPNOL.