Chicken Avidin Research Articles

Mapping the low abundant plasma glycoproteome using Ranachrome-5 immobilized magnetic terpolymer as improved HILIC sorbent

HILIC (hydrophilic interaction liquid chromatography) materials enrich glycopeptides. The non-specific interactions because of support material and inadequate hydrophilicity render loss of less abundant glycopeptides in SPE-based enrichments. In this work, magnetic terpolymer (Fe3O4@MAA/DVB/1,2-Epoxy-5-hexene) is functionalized with Ranachrome-5 to generate enhanced hydrophilicity. Amine, carboxylic, and amide groups of ranachrome-5 provide zwitterionic chemistry. Material’s magnetic core contributes to ease of operation while higher surface area 97.0711 m2 g−1 immobilizes better quantities of Ranachrome-5. Homogeneous morphology, nano-size, and super hydrophilicity enhance enrichment. Ranachrome-5 functionalized polymeric core-shell beads enrich 25, 18 and 16 N-linked glycopeptides via SPE strategy from tryptic digests of model glycoproteins i.e., immunoglobulin G (IgG), horseradish peroxidase (HRP) and chicken avidin, respectively. Zwitterionic chemistry of ranachrome-5 helps in achieving higher selectivity (1:250, HRP / Bovine Serum Albumin), and lower detection limit (100 attomole, HRP digest) with complete glycosylation profile of each standard digest. High binding capacity (137.1 mg/g) and reuse of affinity material up to seven cycles reduce the cost and amount of affinity material for complex sample analysis. A recovery of 91.76% and relative standard deviation (RSD) values less than 1 define the application of HILIC beads for complex samples like plasma. 508 N-linked intact low abundant glycopeptides corresponding to 50 glycoproteins are identified from depleted human plasma samples via nano-Liquid Chromatography-Tandem Mass Spectrometry (nLC-MS/MS). Using Single Nucleotide Variances (BioMuta) for low abundant plasma glycoproteins, the potential association of proteins to four cancers, i.e., breast, lung, uterine, and melanoma is evaluated. Via the bottom-up approach, HILIC beads can analyze clinically important low-abundant glycoproteins.

Iminodiacetic acid (IDA)-generated mesoporous nanopolymer: a template to relate surface area, hydrophilicity, and glycopeptides enrichment.

A three-step strategy is introduced to develop inherent iminodiacetic (IDA)-functionalized nanopolymer. SEM micrographs show homogenous spherical beads with a particle size of 500nm. Further modification to COOH-functionalized 1,2-epoxy-5-hexene/DVB mesoporous nanopolymer enriches glycopeptides via hydrophilic interactions followed by their MS determination. Significantly high BET surface area 433.4336 m2g-1 contributes to the improved surface hydrophilicity which is also shown by high concentration of ionizable carboxylic acids, 14.59 ± 0.25mmolg-1. Measured surface area is the highest among DVB-based polymers and in general much higher in comparison to the previously reported BET surface areas of co-polymers, terpolymers, MOFs, and graphene-based composites. Thirty-one, 19, and 16N-glycopeptides are enriched/identified by nanopolymer beads from tryptic digests of immunoglobulin G, horseradish peroxidase, and chicken avidin, respectively, without additional desalting steps. Material exhibits high selectivity (1:400 IgG:BSA), sensitivity (down to 0.1 fmol), regeneration ability up to three cycles, and batch-to-batch reproducibility (RSD > 1%). Furthermore, from 1 μL of digested human serum, 343N-glycopeptide characteristics of 134 glycoproteins including 30 FDA-approved serum biomarkers are identified via nano-LC-MS/MS. The developed strategy to self-generate IDA on polymeric surface with improved surface area, porosity, and ordered morphology is insignia of its potential as chromatographic tool contributing to future developments in large-scale biomedical glycoproteomics studies.

A suitable and effective stepwise oxidative refolding procedure for highly‐cationic tetrameric avidin in nucleic acid free conditions

Optimized conditions are needed to refold recombinant proteins from bacterial inclusion bodies into their biologically active conformations. In this study, we found two crucial requirements for efficient refolding of cationic tetrameric chicken avidin. The first step is to eliminate nucleic acid contaminants from the bacterial inclusion body. The electrostatic interactions between the remaining nucleic acids and proteins strongly enhanced protein aggregation during the refolding process. The cysteine specific reversible S-cationization procedure was successfully employed for large-scale preparation of nucleic acid free denatured protein without purification tag system. The second step is the intramolecular disulfide formation prior to refolding in dialysis removing denaturant. Disulfide intact monomeric avidin showed efficient formation of biologically active tetrameric conformation during the refolding process. Using this optimized refolding procedure, highly cationic avidin derivative designed as an intracellular delivery carrier of biotinylated protein was successfully prepared.

Fabrication of Piperazine Functionalized Polymeric Monolithic Tip for Rapid Enrichment of Glycopeptides/Glycans.

Enrichment strategies are designed for the pretreatment of low-abundance glycans and glycopeptides prior to mass spectrometric (MS) analysis. Here, a tip-based strategy is being reported for the enrichment of glycopeptides and glycans using a piperazine modified polymeric monolithic tip. The tip is fabricated using the free radical polymerization. Fast separation (2 min) is achieved under optimized conditions with 20 cycles per step of loading, incubation, washing, and elution followed by MALDI-MS analysis. A total of 25, 22, and 34 glycopeptides covering all glycosylation sites are enriched by the modified tips from tryptic digests of horse radish peroxidase, chicken avidin, and human immunoglobulin G, respectively. Piperazine exhibits high selectivity 1:400 horse radish peroxidase/bovine serum albumin, sensitivity to 100 attomoles, recovery 89.51%, and batch to batch reproducibility (RSD > 1) in glycopeptides enrichment. Piperazine tips also enrich glycans from ovalbumin and human immunoglobulin G. High selectivity (1:1200, ovalbumin/BSA) and detection limit of 100 attomole is attained for glycans and furthermore 58 glycans are enriched from human serum. Thus, piperazine tips can be used as an enrichment tool for swift, cost-effective routine analysis of biological samples for separation of glycopeptides and glycans.

(Strept)avidin as a template for ligands other than biotin: An overview.

Chicken avidin and bacterial streptavidin are workhorses in biotechnology. We have used avidin as a scaffold protein to develop avidin variants with novel ligand-binding affinity, so-called antidins. This article covers the strategy applied in the development of antidins. Using a phage display developed for avidin, immobilized ligands were used to select binders from a phage pool displaying avidin variants with randomized sequence in the protein loops. Antidins binding various ligands with nanomolar affinity were obtained. Antidins have already been demonstrated to be suitable for a diagnostic assay measuring serum progesterone levels and they offer a promising alternative to antibodies for the recognition of small molecules.

Molecular features of steroid-binding antidins and their use for assaying serum progesterone.

Chicken avidin (Avd) and streptavidin from Streptomyces avidinii are extensively used in bionanotechnology due to their extremely tight binding to biotin (Kd ~ 10−15 M for chicken Avd). We previously reported engineered Avds known as antidins, which have micro- to nanomolar affinities for steroids, non-natural ligands of Avd. Here, we report the 2.8 Å X-ray structure of the sbAvd-2 (I117Y) antidin co-crystallized with progesterone. We describe the creation of new synthetic phage display libraries and report the experimental as well as computational binding analysis of progesterone-binding antidins. We introduce a next-generation antidin with 5 nM binding affinity for progesterone, and demonstrate the use of antidins for measuring progesterone in serum samples. Our data give insights on how to engineer and alter the binding preferences of Avds and to develop better molecular tools for modern bionanotechnological applications.

Structural characterization of core-bradavidin in complex with biotin.

Bradavidin is a tetrameric biotin-binding protein similar to chicken avidin and bacterial streptavidin, and was originally cloned from the nitrogen-fixing bacteria Bradyrhizobium diazoefficiens. We have previously reported the crystal structure of the full-length, wild-type (wt) bradavidin with 138 amino acids, where the C-terminal residues Gly129-Lys138 (“Brad-tag”) act as an intrinsic ligand (i.e. Gly129-Lys138 bind into the biotin-binding site of an adjacent subunit within the same tetramer) and has potential as an affinity tag for biotechnological purposes. Here, the X-ray structure of core-bradavidin lacking the C-terminal residues Gly114-Lys138, and hence missing the Brad-tag, was crystallized in complex with biotin at 1.60 Å resolution [PDB:4BBO]. We also report a homology model of rhodavidin, an avidin-like protein from Rhodopseudomonas palustris, and of an avidin-like protein from Bradyrhizobium sp. Ai1a-2, both of which have the Brad-tag sequence at their C-terminus. Moreover, core-bradavidin V1, an engineered variant of the original core-bradavidin, was also expressed at high levels in E. coli, as well as a double mutant (Cys39Ala and Cys69Ala) of core-bradavidin (CC mutant). Our data help us to further engineer the core-bradavidin–Brad-tag pair for biotechnological assays and chemical biology applications, and provide deeper insight into the biotin-binding mode of bradavidin.

Hydrazide-functionalized affinity on conventional support materials for glycopeptide enrichment.

In affinity chromatography, enrichment of biomolecules is dependent on the selection of affinity sites immobilized onto a suitable support material. A few hydrazide - functionalized materials with surface modification protocols compatible to conventional support materials like silica and cellulose are reported. The study demonstrates the modification/derivatization pathways that can be adopted to modify the support materials with similar surface chemistry like cellulose, poly(GMA/DVB), or diamond. Poly(GMA/DVB) and cellulose represent hydrophilic supports whereas diamond isa hydrophobic support material. SEM images of three materials provide surface morphology whereas FT-IR confirms reaction completion and derivatization. These hydrazide - functionalized materials are applied to fetuin digest for glycopeptides enrichment and subsequently for selectivity and sensitivity assessment. Statistically, poly(GMA/DVB) shows 85.7% sensitivity with specificity of 88.8% in the enrichment experiments. Diamond offers hydrophobic interactions to non-glycopeptides and they co-elute with glycopeptides, resulting in reduced sensitivity down to 69.2%. Poly(GMA/DVB) shows recovery up to 89%, while recovery for cellulose and diamond is 83 and 71%, respectively. The materials enrich mono-N-linked-glycosylated peptide from tryptic digest of chicken avidin spiked in fetuin digest. The hydrazide group density on cellulose, poly(GMA/DVB), and diamond is 2.8, 2.3, and 2.1mmol/g, respectively; this contributes towards the specificity and sensitivity of designed materials. The materials are also applied to serum samples and enriched glycopeptides characteristic of serum glycoproteins of clinical importance. Therefore this study provides routes for the economical surface modifications of support materials and to fabricate affinity materials with improved efficiency. Graphical Abstract Glycopeptides enrichment by hydrazine affinity.

Efficient enrichment of glycopeptides with sulfonic acid-functionalized mesoporous silica

This work presents an efficient and selective enrichment method for glycoprotein/glycopeptides with sulfonic acid-functionalized mesoporous silica (SBA-15-SO3H), which is synthesized via simple oxidation of -SH groups with H2O2. The functionalized SBA-15 shows large surface area and accessible pores, and can selectively adsorb glycopeptides via hydrogen bond and hydrophilic interaction. Upon the selective enrichment prior to the mass spectrometric (MS) analysis, the signals of glycopeptides are significantly enhanced, which leads to the identifiable signals of 21 glycopeptides from the digest of HRP, 16 glycopeptides from the digest of human IgG, and 16 glycopeptides from the digest of chicken avidin. The SBA-15-SO3H gives significant selectivity for glycopeptides even at a low molar ratio of glycopeptides to nonglycopeptides with an enrichment time of 15min. Therefore, this work provides a powerful material for selective enrichment and identification of low abundant glycopeptides in glycoproteomic analysis.

Hydrazino-s-triazine based labelling reagents for highly sensitive glycan analysis via liquid chromatography–electrospray mass spectrometry

Labelling strategy plays an important role in mass spectrometry (MS) based glycan analysis due to the high hydrophilicity and low ionization efficiency of glycans. Ten hydrazino-s-triazine based labelling reagents were synthesized under facile and controllable conditions for highly sensitive liquid chromatography–electrospray mass spectrometry glycan analysis in this work. Attached to N-glycans through non-reductive reactions, these new labelling reagents were evaluated in aspect of the differently enhanced glycan response to mass spectrometry. Three of the ten labelling reagents demonstrated to be reliable and remarkable for glycan analysis with satisfactory linearity and lowered limits of detection using maltoheptaose (DP7) as model. Furthermore, the most optimal labelling reagent was taken as an example for highly sensitive profiling of N-linked glycans both cleaved from chicken avidin and glycoproteins in human serum, indicating prospective availability for these labelling reagents in frontier of glycomics researches.

Switchavidin: reversible biotin-avidin-biotin bridges with high affinity and specificity.

Switchavidin is a chicken avidin mutant displaying reversible binding to biotin, an improved binding affinity toward conjugated biotin, and low nonspecific binding due to reduced surface charge. These properties make switchavidin an optimal tool in biosensor applications for the reversible immobilization of biotinylated proteins on biotinylated sensor surfaces. Furthermore, switchavidin opens novel possibilities for patterning, purification, and labeling.

The highly dynamic oligomeric structure of bradavidin II is unique among avidin proteins

Bradavidin II is a biotin-binding protein from Bradyrhizobium japonicum that resembles chicken avidin and bacterial streptavidin. A biophysical characterization was carried out using dynamic light scattering, native mass spectrometry, differential scanning calorimetry, and isothermal titration calorimetry combined with structural characterization using X-ray crystallography. These observations revealed that bradavidin II differs from canonical homotetrameric avidin protein family members in its quaternary structure. In contrast with the other avidins, bradavidin II appears to have a dynamic (transient) oligomeric state in solution. It is monomeric at low protein concentrations but forms higher oligomeric assemblies at higher concentrations. The crystal structure of bradavidin II revealed an important role for Phe42 in shielding the bound ligand from surrounding water molecules, thus functionally replacing the L7,8 loop essential for tight ligand binding in avidin and streptavidin. This bradavidin II characterization opens new avenues for oligomerization-independent biotin-binding protein development.

Uniformly Cationized Protein Efficiently Reaches the Cytosol of Mammalian Cells

Protein cationization techniques are powerful protein transduction methods for mammalian cells. As we demonstrated previously, cationized proteins with limited conjugation to polyethylenimine have excellent ability to enter into cells by adsorption-mediated endocytosis [Futami, J., et al. (2005) J. Biosci. Bioeng. 99, 95-103]. In this study, we show that proteins with extensive and uniform cationization covering the protein surface reach the cytoplasm and nucleus more effectively than proteins with limited cationic polymers or proteins that are fused to cationic peptides. Although extensive modification of carboxylates results in loss of protein function, chicken avidin retains biotin-binding ability even after extensive amidation of carboxylates. Using this cationized avidin carrier system, the protein transduction ability of variously cationized avidins was investigated using biotinylated protein as a probe. The results revealed that cationized avidins bind rapidly to the cell surface followed by endocytotic uptake. Small amounts of uniformly cationized avidin showed direct penetration into the cytoplasm within a 15 min incubation. This penetration route seemed to be energy dependent and functioned under cellular physiological conditions. A biotinylated exogenous transcription factor protein that penetrated cells was demonstrated to induce target gene expression in living cells.

DNA family shuffling within the chicken avidin protein family – A shortcut to more powerful protein tools

Avidins represent an interesting group of proteins showing high structural similarity and ligand-binding properties but low similarity in primary structure. In this study, we show that it is possible to create functional chimeric proteins from the avidin protein family when applying DNA family shuffling to the genes of the avidin protein family: avidin, avidin related gene 2 and biotin-binding protein A. The novel chimeric proteins were selected by phage display biopanning against biotin, and the selected enriched proteins were characterized, displaying diverse features distinct from the parental genes, including binding to cysteine.

Covalent Biofunctionalization of Cellulose Acetate with Thermostable Chimeric Avidin

A stable, bioactive cellulose acetate (CA) surface was developed by functionalizing the surface with highly thermostable avidin form. The CA films were first functionalized with a mixture of 3-aminopropyltrimethoxysilane and tetraethoxysilane to introduce free amino groups onto the surface of CA films. Free amino groups were functionalized with glutaraldehyde to obtain an activated surface for covalent biomolecule immobilization. A genetically engineered, high-affinity biotin-binding protein chimeric avidin, ChiAVD(I117Y), was used for biofunctionalization of the surface. The chimeric avidin protein has an increased stability in chemically harsh conditions and at high temperature when compared to wt (strept)avidin. The biological activity, i.e., biotin-binding capacity, of the immobilized protein was probed by [(3)H]-biotin. The activity of the chimeric avidin on functionalized CA films was fully retained over the three months' study period. The biotin-binding capacity of the immobilized chimeric avidin was compared to that of immobilized streptavidin, chicken avidin, and rhizavidin and significant differences between proteins were detected. The developed material offers a valuable platform for the development of inexpensive in vitro diagnostics and also supports biosensing applications that are required to operate under demanding conditions.

Construction of Chimeric Dual-Chain Avidin by Tandem Fusion of the Related Avidins

BackgroundAvidin is a chicken egg-white protein with high affinity to vitamin H, also known as D-biotin. Many applications in life science research are based on this strong interaction. Avidin is a homotetrameric protein, which promotes its modification to symmetrical entities. Dual-chain avidin, a genetically engineered avidin form, has two circularly permuted chicken avidin monomers that are tandem-fused into one polypeptide chain. This form of avidin enables independent modification of the two domains, including the two biotin-binding pockets; however, decreased yields in protein production, compared to wt avidin, and complicated genetic manipulation of two highly similar DNA sequences in the tandem gene have limited the use of dual-chain avidin in biotechnological applications.Principal FindingsTo overcome challenges associated with the original dual-chain avidin, we developed chimeric dual-chain avidin, which is a tandem fusion of avidin and avidin-related protein 4 (AVR4), another member of the chicken avidin gene family. We observed an increase in protein production and better thermal stability, compared with the original dual-chain avidin. Additionally, PCR amplification of the hybrid gene was more efficient, thus enabling more convenient and straightforward modification of the dual-chain avidin. When studied closer, the generated chimeric dual-chain avidin showed biphasic biotin dissociation.SignificanceThe improved dual-chain avidin introduced here increases its potential for future applications. This molecule offers a valuable base for developing bi-functional avidin tools for bioseparation, carrier proteins, and nanoscale adapters. Additionally, this strategy could be helpful when generating hetero-oligomers from other oligomeric proteins with high structural similarity.

Expression of various biotin-binding proteins in transgenic tobacco confers resistance to potato tuber moth, Phthorimaea operculella (Zeller) (fam. Gelechiidae)

The high affinity biotin-binding proteins (BBPs) avidin and streptavidin are established insecticidal agents, effective against a range of insect pests. Earlier work showed that, when expressed in planta, full length avidin and a truncated form of streptavidin are highly insecticidal. More recently, a wide range of BBPs, found in diverse organisms or engineered for various biotechnological applications have been reported. However, their effectiveness as plant-based insecticides has not been established. Here we report in planta expression of three different genes, designed to produce BBP variant proteins in the vacuole. The first was mature full length chicken avidin, the second a circularly permuted dual chain chicken avidin, and the third was an avidin homologue, a native bradavidin from Bradyrhyzobium japonicum. All three proteins were expressed in Nicotiana tabacum (tobacco). The transgenic tobacco lines were healthy, phenotypically normal and, when subjected to bioassay, resistant to the important cosmopolitan pest, potato tuber moth (Phthorimaea operculella) larvae at concentrations of ~50ppm.

Insecticidal activity of recombinant avidin produced in yeast

An expression construct encoding chicken ( Gallus gallus) avidin was assembled from amplified fragments of genomic DNA. Recombinant, functional avidin was produced in Pichia pastoris, with yields of up to 80 mg/l of culture supernatant. The recombinant avidin had similar insecticidal activity to egg white avidin when assayed against larvae of a lepidopteran crop pest, cabbage moth ( Mamestra brassicae), causing >90% reduction in growth and 100% mortality when fed in optimised diets at levels of 1.5 μM and 15 μM (100 ppm and 1000 ppm wet weight of recombinant protein). The recombinant protein was also highly toxic to a hemipteran pest, the pea aphid ( Acyrthosiphon pisum), when fed in liquid artificial diet, causing 100% mortality after 4 days when present at concentrations ≥3.8 μM (0.25 mg/ml, 250 ppm). Mortality was dose-dependent, with an estimated LC 50 of 2.1 μM. Toxicity to A. pisum was prevented by biotin supplementation of diet. In contrast, avidin had no significant effects on the survival of cereal aphid ( Sitobion avenae) at concentrations up to 30 μM in liquid diet. Analysis of genomic DNA showed that symbionts from both aphid species lack the ability to synthesise biotin de novo. Cereal aphids appear to be less sensitive to recombinant avidin in the diet through proteolysis of the ingested protein, which would allow recovery of bound biotin.

Biochemical and Biological Characterization of a New Oxidized Avidin with Enhanced Tissue Binding Properties

Chicken avidin and bacterial streptavidin are widely employed in vitro for their capacity to bind biotin, but their pharmacokinetics and immunological properties are not always optimal, thereby limiting their use in medical treatments. Here we investigate the biochemical and biological properties of a new modified avidin, obtained by ligand-assisted sodium periodate oxidation of avidin. This method allows protection of biotin-binding sites of avidin from inactivation caused by the oxidation step and delay of avidin clearance from injected tissue by generation of aldehyde groups from avidin carbohydrate moieties. Oxidized avidin shows spectroscopic properties similar to that of native avidin, indicating that tryptophan residues are spared from oxidation damage. In strict agreement with these results, circular dichroism and isothermal titration calorimetry analyses confirm that the ligand-assisted oxidation preserves the avidin protein structure and its biotin binding capacity. In vitro cell binding and in vivo tissue residence experiments demonstrate that aldehyde groups provide oxidized avidin the property to bind cellular and interstitial protein amino groups through Schiff's base formation, resulting in a tissue half-life of 2 weeks, compared with 2 h of native avidin. In addition, the efficient uptake of the intravenously injected (111)In-BiotinDOTA (ST2210) in the site previously treated with modified avidin underlines that tissue-bound oxidized avidin retains its biotin binding capacity in vivo. The results presented here indicate that oxidized avidin could be employed to create a stable artificial receptor in diseased tissues for the targeting of biotinylated therapeutics.

Structural and functional characteristics of xenavidin, the first frog avidin from Xenopus tropicalis

BackgroundAvidins are proteins with extraordinarily high ligand-binding affinity, a property which is used in a wide array of life science applications. Even though useful for biotechnology and nanotechnology, the biological function of avidins is not fully understood. Here we structurally and functionally characterise a novel avidin named xenavidin, which is to our knowledge the first reported avidin from a frog.ResultsXenavidin was identified from an EST sequence database for Xenopus tropicalis and produced in insect cells using a baculovirus expression system. The recombinant xenavidin was found to be homotetrameric based on gel filtration analysis. Biacore sensor analysis, fluorescently labelled biotin and radioactive biotin were used to evaluate the biotin-binding properties of xenavidin - it binds biotin with high affinity though less tightly than do chicken avidin and bacterial streptavidin. X-ray crystallography revealed structural conservation around the ligand-binding site, while some of the loop regions have a unique design. The location of structural water molecules at the entrance and/or within the ligand-binding site may have a role in determining the characteristic biotin-binding properties of xenavidin.ConclusionThe novel data reported here provide information about the biochemically and structurally important determinants of biotin binding. This information may facilitate the discovery of novel tools for biotechnology.