Chemically Research Articles

Electrical monitoring of single-event protonation dynamics at the solid-liquid interface and its regulation by external mechanical forces

Detecting chemical reaction dynamics at solid-liquid interfaces is important for understanding heterogeneous reactions. However, there is a lack of exploration of interface reaction dynamics from the single-molecule perspective, which can reveal the intrinsic reaction mechanism underlying ensemble experiments. Here, single-event protonation reaction dynamics at a solid-liquid interface are studied in-situ using single-molecule junctions. Molecules with amino terminal groups are used to construct single-molecule junctions. An interfacial cationic state present after protonation is discovered. Real-time electrical measurements are used to monitor the reversible reaction between protonated and deprotonated states, thereby revealing the interfacial reaction mechanism through dynamic analysis. The protonation reaction rate constant has a linear positive correlation with proton concentration, whereas the deprotonation reaction rate constant has a linear negative correlation. In addition, external mechanical forces can effectively regulate the protonation reaction process. This work provides a single-molecule perspective for exploring interface science, which will contribute to the development of heterogeneous catalysis and electrochemistry.

Investigation into transport behavior of platinum‐Nafion interface with functionalized graphene oxide

AbstractIn the catalytic layer of proton exchange membrane fuel cells, water molecules in ionomers tend to be accumulated at the ionomer/Pt interface, preventing oxygen from reaching the Pt surface to participate in chemical reactions. It is necessary to take measures to improve the water molecules distribution and proton transport performance in the ionomer on the Pt surface. In this work, the effect of “acid–base pair” functionalized graphene oxide (AB‐GO) as the additive on the distribution of water molecules and transport property in the ionomer is evaluated. The results demonstrate that with the addition of AB‐GO, the distribution uniformity of water molecules and hydronium ions in the ionomer on the Pt surface is improved. The connectivity of water cluster is also increased. When the doping ratio of BAF‐GO and TF‐GO is 1:3, the connectivity coefficient of water cluster is about 1.37 times that of Nafion ionomer without the doping.

A Lab Prototype for Rapid Electrochemical Detection of Escherichia coli in Water Using Modified Screen-Printed Electrodes.

Recognizing the need for a hand-held device capable of quantitatively measuring the concentration of bacteria in water, this paper describes a label-free method for rapid detection of Escherichia coli (E. coli) in water via H2O2 decomposition using screen-printed electrodes (SPE) modified with nanostructured metal oxide layers. The study encompasses sensor preparation, bacteria culture, synthesis and characterization of nanostructures, and development of a readout circuitry for lab prototyping. During sensing measurements, the bacteria are first made to interact with H2O2 and subsequently, the H2O2 solution is exposed on the sensing surface. The electrochemical sensors are fabricated by modifying the working electrode of SPE with nanostructured metal oxide layers of MnO2 and TiO2 as these play a crucial role in the detection of E. coli in water. The sensing experiments of MnO2-modified SPE show a significant response to bacteria with a sensitivity of 0.82 mV.mL/log CFU and a limit of detection (LOD) of 1.8 CFU/mL, while the TiO2-modified SPE exhibits a linear response over a wide range of bacterial concentrations with a sensitivity of 1.12 mV·mL/log CFU and a limit of detection of 2.23 CFU/mL. Both sensors demonstrate a rapid response, stability, repeatability, and a recovery time of 70 ms. Additionally, selectivity with respect to other bacteria, wastewater components such as glucose, ammonium sulfate, and sodium carbonate, and testing with RO, DI, and tap water samples are conducted to evaluate the sensors' performance. A detailed sensing mechanism has been developed to comprehend the results, including chemical and biological reactions, metal oxide interfaces, morphology, and other surface studies of the sensing surface. A prototype comprising a sensor chip, an Arduino board, and other necessary circuit components is tested with various bacterial solutions. This enables its use for on-field rapid detection of bacteria in water using smaller volumes and a portable system.

Nonlinear Dynamics for the Ising Model

We introduce and analyze a natural class of nonlinear dynamics for spin systems such as the Ising model. This class of dynamics is based on the framework of mass action kinetics, which models the evolution of systems of entities under pairwise interactions, and captures a number of important nonlinear models from various fields, including chemical reaction networks, Boltzmann’s model of an ideal gas, recombination in population genetics and genetic algorithms. In the context of spin systems, it is a natural generalization of linear dynamics based on Markov chains, such as Glauber dynamics and block dynamics, which are by now well understood. However, the inherent nonlinearity makes the dynamics much harder to analyze, and rigorous quantitative results so far are limited to processes which converge to essentially trivial stationary distributions that are product measures. In this paper we provide the first quantitative convergence analysis for natural nonlinear dynamics in a combinatorial setting where the stationary distribution contains non-trivial correlations, namely spin systems at high temperatures. We prove that nonlinear versions of both the Glauber dynamics and the block dynamics converge to the Gibbs distribution of the Ising model (with given external fields) in times O(nlogn)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$O(n\\log n)$$\\end{document} and O(logn)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$O(\\log n)$$\\end{document} respectively, where n is the size of the underlying graph (number of spins). Given the lack of general analytical methods for such nonlinear systems, our analysis is unconventional, and combines tools such as information percolation (due in the linear setting to Lubetzky and Sly), a novel coupling of the Ising model with Erdős-Rényi random graphs, and non-traditional branching processes augmented by a “fragmentation” process. Our results extend immediately to any spin system with a finite number of spins and bounded interactions.

Robustly Flexible, Highly Transparent, and Polymerization-Regulated Polyimide Aerogel Membranes as Efficient Thermal Insulators for Solar Collection.

Efficient thermal insulators that can maintain their efficacy at extreme temperatures are in pressing demand, particularly in fields such as energy saving, aerospace, and sophisticated equipment. Herein, a novel and facile polymerization-regulated optimal strategy is adapted to realize the comprehensive performance of polyimide (PI) aerogel membranes with mechanical robustness, high flexibility, hydrophobicity, light transmittance, and efficient thermal insulation. Benefiting from the hydrolysis of monomers and chemical imidization reaction process verified by a thermo-chemo-mechanically coupled theoretical model, the viscosity of precursors, shrinkage rate, and microstructure of aerogels are precisely controlled, leading to a low thermal conductivity range of 0.023-0.044 W/(m·K). The fabricated PI aerogel membranes, which undergo a remarkable transformation from their initial brittle and opaque nature to a state of high flexibility and transparency, exhibit a 3.0 times increase in tensile strength (4.6 MPa) and a 8.4 times improvement in elongation at break (20.6%) over previous studies while demonstrating an exceptional light transmittance of 92.5% across a wide spectral range from 500 to 2500 nm. Additionally, the PI aerogel membranes possess superior mechanical properties and a wide temperature resistance range extending from -196 to 300 °C. These flexible PI aerogel membranes can be effectively adjusted to meet the practical application of a circular ring solar thermal collector, which displayed a high solar heat collection temperature of 135 °C at a thickness of 0.5 mm. The coordination between the thermophysical properties and mechanical properties of the PI aerogel membranes in this work holds great promise for application requirements of thermal insulators in optical elements under harsh environments.

Strong Dependence of Point Defect Properties in Metal Halide Perovskites on Description of van der Waals Interaction.

Weaker than ionic and covalent bonding, van der Waals (vdW) interactions can have a significant impact on structure and function of molecules and materials, including stabilities of conformers and phases, chemical reaction pathways, electro-optical response, electron-vibrational dynamics, etc. Metal halide perovskites (MHPs) are widely investigated for their excellent optoelectronic properties, stemming largely from high defect tolerance. Although MHPs are primarily ionic compounds, we demonstrate that vdW interactions contribute ∼5% to the total energy, and that static, dynamics, electronic and optical properties of point defects in MHPs depend significantly on the vdW interaction model used. Focusing on widely studied CsPbBr3 with the common Br vacancy and interstitial defects, we compare the PBE, PBE+D3, PBE+TS, PBE+TS/HI and PBE+MBD-NL models and show that vdW interactions strongly alter the global and local geometric structure, and change the fundamental bandgap, midgap state energies and electron-vibrational coupling. The vdW interaction sensitivity stems from involvement of heavy and highly polarizable chemical elements and the soft MHP structure.

Global modeling of aerosol nucleation with a semi-explicit chemical mechanism for highly oxygenated organic molecules (HOMs)

Abstract. New particle formation (NPF) involving organic compounds has been identified as an important process affecting aerosol particle number concentrations in the global atmosphere. Laboratory studies have shown that highly oxygenated organic molecules (HOMs) can make a substantial contribution to NPF, but there is a lack of global model studies of NPF with detailed HOM chemistry. Here, we incorporate a state-of-the-art biogenic HOM chemistry scheme with 96 chemical reactions to a global chemistry–climate model and quantify the contribution to global aerosols through HOM-driven NPF. The updated model captures the frequency of NPF events observed at continental surface sites (normalized mean bias changes from −96 % to −15 %) and shows reasonable agreement with measured rates of NPF and sub-20 nm particle growth. Sensitivity simulations show that compared to turning off the organic nucleation rate, turning off organic initial growth results in a more substantial decrease in aerosol number concentrations. Globally, organics contribute around 45 % of the annual mean vertically integrated nucleation rate (at 1.7 nm) and 25 % of the vertically averaged growth rate. The inclusion of HOM-related processes leads to a 39 % increase in the global annual mean aerosol number burden and a 33 % increase in cloud condensation nuclei (CCN) burden at 0.5 % supersaturation compared to a simulation with only inorganic nucleation. Our work predicts a greater contribution of organic nucleation to NPF than previous studies due to the semi-explicit HOM mechanism and an updated inorganic NPF scheme. The large contribution of biogenic HOMs to NPF on a global scale could make aerosol sensitive to changes in biogenic emissions.

Tetrahydropyrimidine Ionizable Lipids for Efficient mRNA Delivery.

Lipid nanoparticles (LNPs) have emerged as an effective and promising technology for messenger RNA (mRNA) delivery, offering a potential solution to physiological barriers and providing an alternative approach to gene therapy without the drawbacks associated with viral delivery. However, efficiently delivering mRNA remains a significant challenge in nucleic acid-based therapies due to the limitations of current LNP platforms in achieving optimal endosomal escape and mRNA release, which largely relies on finding a suitable ionizable lipid. Additionally, the synthesis of these ionizable lipids involves multiple chemical reactions, often making the process time-consuming and difficult to translate. In this study, we employed a facile, catalyst-free, and versatile one-pot multicomponent reaction (MCR) to develop a library of ionizable lipids featuring a pharmacologically significant tetrahydropyrimidine (THP) backbone, tailored for enhanced mRNA delivery. A library of 26 THP ionizable lipids was systematically synthesized in just 3 h and formulated with luciferase mRNA for initial in vitro screening. The THP LNPs exhibited tunable particle sizes, favorable ζ-potentials, and high encapsulation efficiencies. Among them, THP1 demonstrated the highest transfection efficiency both in vitro and in vivo after intramuscular administration, comparable to DLin-MC3-DMA (MC3), a conventional benchmark. Further optimization of THP1 with phospholipids significantly enhanced intramuscular mRNA delivery and showed sustained protein expression in vivo for up to 5 days. More importantly, it demonstrated successful intravenous delivery in a dose-dependent manner with minimal toxicity, as indicated by hematological, histopathological, and proinflammatory cytokine assessments. Furthermore, THP1 LNPs also demonstrated the ability to edit genes in specific liver tissues in a tdTomato transgenic mouse model, highlighting their precision and utility in targeted therapeutic applications. These findings position THP1 LNPs as promising candidates for advancing mRNA-based therapies, with significant implications for clinical translation in vaccine delivery and CRISPR/Cas9-mediated gene editing in the liver.

Tracked evolution of single biochar particle’s morphology during pyrolysis in operando x-ray micro-computed tomography

The engineering of biochars with desired morphologies and pore structures is a far-reaching objective towards sustainable pore-dependent environmental technologies, such as water and soil remediation or catalysis. We hereby report a series of experiments that allow the direct following of the shape and porosity of single biochar particles during pyrolysis. Particles ~ 1–2 mm in diameter of unwashed and water-washed raw walnut shells were continuously 3D imaged during pyrolysis to 575 ℃ at a 10 K min−1 in Ar to obtain time- and temperature-resolved x-ray micro computed tomographies to a 0.82 μm resolution. Results showed visual evidence of a 30% and 70% v/v particle shrinkage for unwashed and washed samples, respectively. Particle swelling between 200 and 300 ℃ in the unwashed sample provided evidence of the softening of native biopolymers associated with lignin in untreated biomass. A purpose-defined parameter Λ shows the temperature-dependence of pore re-distribution towards the center of the particle to be linear for both samples. Λ was found to be 3.2×10-4K-1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$3.2\ imes {10}^{-4}{K}^{-1}$$\\end{document} in the washed sample, approximately 3.5 times faster than in the unwashed one. Such linear dependence is significantly slower than an exponential Arrhenius-like trend thereby providing a qualitative measure of the heat and mass transport phenomena limiting the chemical reactions in the porous medium. This evidence is key to resolving the pathways to the thermochemical decomposition of biomass leading to preparation of precision-engineered biochars.Graphical

Entropy generation in Casson nanofluid flow over a lubricated wall in the presence of induced magnetic field and activation energy

ABSTRACT The research on entropy generation in a mechanical system is quite imperative owing to its immense applications in the production of advanced cooling devices and medical appliances. The basic need on this research is how to optimize the irreversibilities within the systems and channelize that energy towards the benefit. This study elucidates the entropy generation analysis of a Casson nanofluid near a stagnation point over a lubricated vertical wall. A thin film of shear-thinning liquid with power law index of 0.5 is employed on the wall to ensure the lubrication. The effect of induced magnetic field and the chemical reaction stimulated by the activation energy is also incorporated within the flow. The non-linear PDEs of the substantive problem along with the compatible interfacial and boundary conditions are reverted into ODEs with the aid of suitable similarity transformation, and then cracked numerically using the sixth-order Runge Kutta method assisted with Nachtsheim–Swigert shooting practice. One of the significant findings reveals that the fluid friction irreversibilities in the entropy generation are diminished with the magnetic parameter and the Casson parameter, whereas the thermal irreversibility predominates over the total entropy generation for the escalating values of the activation energy parameter.

Electric-Field Catalysis on Carbon Nanotubes in Electromicrofluidic Reactors: Monoterpene Cyclizations.

The control over the movement of electrons during chemical reactions with oriented external electric fields (OEEFs) has been predicted to offer a general approach to catalysis. Recently, we suggested that many problems to realize electric-field catalysis in practice under scalable bulk conditions could possibly be solved on multiwalled carbon nanotubes in electromicrofluidic reactors. Here, we selected monoterpene cyclizations to assess the scope of our system in organic synthesis. We report that electric-field catalysis can function by stabilizing both anionic and cationic transition states, depending on the orientation of the applied field. Moreover, electric-field catalysis can promote reactions which are barely accessible by general Brønsted and Lewis acids and field-free anion-π and cation-π interactions, and drive chemoselectivity toward intrinsically disfavored products without the need for pyrene interfacers attached to the substrate to prolong binding to the carbon nanotubes. Finally, interfacing with chiral organocatalysts is explored and evidence against contributions from redox chemistry is provided.

Controlled chemical transformation of lignin by nitric acid treatment and carbonization

This study focuses on understanding the chemical reactions and results of Kraft lignin transformation through nitric acid treatment and subsequent carbonization. With its rich carbon content, lignin stands out as a promising candidate for the manufacturing of high-value carbon materials. The lignin underwent effective nitration, depolymerization, and oxidation under ambient conditions and at 40 °C, while a slight increase in reaction temperature significantly reduced the reaction time. The molecular weight Mw was effectively reduced from 4371 g/mol to 767 g/mol. The acid-treated lignin samples with incorporated nitro groups were further carbonized to create nitrogen-doped carbon structures. The resulting materials show stable nitrogen content (about at 5 wt%) even after carbonization due to the transformation of nitro groups into thermally stable pyridinic moieties, thereby exhibiting enhanced electrocatalytic properties compared to nitrogen-free carbon materials derived from Kraft lignin. The nitric acid-assisted treatment of lignin obviates the need for catalysts, and additional extraction or purification steps for preparing bio-derived carbon precursors, rendering it facile, fast, and cost-efficient.

Fast Collective Hydrogen-Bond Dynamics in HexafluoroisopropanolRelated to its Chemical Activity.

Using fluorinated mono-alcohols, in particular hexafluoro-isopropanol (HFIP), as a solvent can enhance chemical reaction rates in a spectacular manner. Previous work has shown evidence that this enhancement is related to the hydrogen-bond structure of these liquids. Here, we investigate the hydrogen-bond dynamics of HFIP and compare it to thatof its non-fluorinated analog, isopropanol. Ultrafast infrared spectroscopy show that the dynamics of individual hydrogen-bonds is about twice as slow in HFIP as in isopropanol. Surprisingly, from dielectric spectroscopy we find the opposite behavior for the dynamics of hydrogen-bonded clusters: collective rearrangements are3 times faster in HFIP than in isopropanol. This difference indicates that the hydrogen-bonded clusters in HFIP are smaller than in isopropanol. The differences in cluster size can be traced to changes in the hydrogen-bond donor and acceptor strengths upon fluorination. The smaller cluster size canboostreaction rates in HFIP by increasing the concentration of reactive, terminal OH-groups of the clusters, whereas the fast collective dynamics can increase the rate of formation of hydrogen bonds with the reactants. The longer lifetime of the individual hydrogen bonds in HFIP can enhance the stability of the hydrogen-bonded clusters, and so increase the probability of reactant-solvent hydrogen bonding.

Shannon entropy variation as a global indicator of electron density contraction at interatomic regions in chemical reactions.

The negative of the Shannon entropy derivative is proposed to account for electron density contraction as the chemical bonds are breaking and forming during a chemical reaction. We called this property the electron density contraction index, EDC, which allows identifying stages in a reaction that are dominated by electron contraction or expansion. Four different reactions were analyzed to show how the EDC index changes along the reaction coordinate. The results indicate that the rate of change of Shannon entropy is directly related to the rate of change of the electron density at the bond critical points between all the atomic pairs in the molecular systems. It is expected that EDC will complement the detailed analysis of reaction mechanisms that can be performed with the theoretical tools available to date. Density functional theory calculations at the B3LYP/6-31G(d,p) level of theory were carried out using Gaussian 16 to analyze the reaction mechanisms of the four reactions studied. The reaction paths were obtained via the intrinsic reaction coordinate method, which served as the reaction coordinate to obtain the reaction force and the EDC profiles in each case. Shannon entropy and electron density at the bond critical points were calculated using the Multiwfn 3.7 package.

Interface Stability and Reaction Mechanisms of Li3YCl5Br with High-Voltage Cathodes and Li Metal Anode: Insights from Ab Initio Simulations.

Recent advancements in battery technology emphasize the critical role of solid electrolytes in enhancing the performance and safety of next-generation batteries. In this study, we investigate the interface stability and reaction mechanisms of Li3YCl5Br, a promising halide-based solid electrolyte, in contact with high-voltage Ni-Mn-Co (NMC) cathodes and a Li metal anode using ab initio molecular dynamics simulations. Our findings reveal that Li3YCl5Br reacts with charged NMC cathodes. This reaction involves changes in the oxidation states of Br- anions in Li3YCl5Br and d-element cations in NMC, as well as the diffusion of Li ions from the solid electrolyte to the cathode to maintain charge balance. The reaction is confined to the interface, suggesting bulk stability. Conversely, the Li/Li3YCl5Br interface exhibits significant instability, with a chemical reaction that results in substantial structural changes and the formation of LiCl and LiBr at the solid electrolyte surface and metallic Y at the Li anode surface. These insights provide valuable information for optimizing interfacial design, aiming at improving the performance and reliability of all-solid-state batteries using halide solid electrolytes.

Impact of high-speed nanodroplets on various pathogenic bacterial cell walls.

Although existing disinfection techniques demonstrate bactericidal effects through chemical reactions, concerns regarding human toxicity and environmental contamination have been raised. To the best of our knowledge, this study is the first in the world to reveal that the use of this technology, with nanodroplets of less than 100 nm, can destroy and sterilize bacterial cells by colliding with biofilm-forming bacteria at 75 MPa. Furthermore, because this technology uses only water, it can solve the problems of human toxicity and environmental contamination caused by existing disinfection techniques. Because of its minimal water usage, it can be employed for sanitation worldwide without being limited to specific regions. Our report proposes an unprecedented physical disinfection approach that utilizes a high-speed nanodroplet generation technology.

Advanced CuO-Ag2WO4-Ni nanophotocatalyst in the synthesis of some chromeno[4,3-b]chromenes as effective lung cancer drugs

A novel heterogeneous nanocomposite CuO-Ag2WO4-Ni embedded within a foam matrix has been biosynthesized from Cressa Cretica leaves extract and comprehensively characterized using various techniques, including FT-IR, XRD, EDX, FE-SEM, DRS, TEM, and BET. This innovative nanocomposite demonstrates exceptional photocatalytic efficiency in the synthesis of some chromeno[4,3-b]chromenes, which have shown promise as effective medications in lung cancer treatment. The photocatalytic reactions are facilitated under a green laser light using ethanol as solvent. Compared to individual components of CuO-Ag2WO4-Ni, the nanocomposite exhibited superior performance in terms of light absorption, surface tunability, charge carrier generation, and stability. Noteworthy advantages of this nanocomposite include high reusability and ease of separation from the reaction mixture, thereby ensuring strong reproducibility. The foam structure plays a pivotal role in enhancing photocatalytic activity due to its high surface area and distinctive morphology. Mechanistic studies indicate that the generated holes and electrons effectively drive selective oxidation and reduction reactions, providing a reliable method for synthesizing a range of chromenes. The CuO-Ag2WO4-Ni exhibited remarkable stability across multiple catalytic cycles, with minimal morphological degradation and low leaching of the catalytic species, ensuring long-term effectiveness and cost efficiency for industrial applications. At the final part of this study, the MTT experiment was planned to investigate cytotoxicity of CuO-Ag2WO4-Ni on A549 lung cancer cells. This study affirmed that the performed nanomaterial has effective toxicity agaings the selected cell line.

Catalytic functionalization of MCM-41 and MCM-48 with copper by modified template ion-exchange method for low-temperature NH3-SCR process: the role of complexing agents for copper dispersion

AbstractMesoporous silicas of MCM-41 and MCM-48 types were synthesized and modified with copper by template ion-exchange (TIE) technique. A high dispersion of deposited copper species was managed by subsequent treatment of the samples with ammonia, urea, or acetonitrile solution. Copper-modified silicas were analysed in terms of their chemical composition (ICP-OES), ordering of porous structure (XRD), textural parameters (low-temperature N2 sorption), dispersion and form of introduced copper species (UV–vis-DR, XRD, H2-TPR, NH3-TPD). Mesoporous silicas modified with copper exhibited promising catalytic efficiency in selective catalytic reduction of NO with ammonia (NH3-SCR). The samples containing dispersed copper species (predominantly monomeric copper cations) presented enhanced catalytic activity compared to catalysts containing CuO aggregates. On the other hand, CuO aggregates showed greater catalytic activity in the side process of direct ammonia oxidation by oxygen present in the reaction mixture. It was demonstrated that TIE post-treatment of the samples with urea resulted in most effective improving dispersion of deposited copper and is less destructive for ordered porous structures of mesoporous silica comparing to treatment with ammonia solution. Graphical abstract

A DFT study on antimonene as a drug delivery vehicle for carmustine, lomustine and nitrosourea anticancer drugs

We used antimonene (Sb) as a delivery vehicle for transporting drugs like Carmustine (CMT), Lomustine (LOMU) and Nitrosourea (NU) in both gaseous and liquid states. The Sb nanosheet structure is stable, and its potential for drug adsorption has been investigated in both parallel and perpendicular directions. The parallel configuration is most stable with a higher adsorption energy of −1.18 eV, −0.63 eV and −1.14 eV for LOMU, CMT and NU respectively. We investigated structural parameters, electronic properties, work function and chemical reactivity. Only NU alters the Sb’s semiconductor behaviour to metallic and has the shortest recovery time in the parallel direction. Hirshfield charge analysis revealed that nanosheet displays electron accepting properties, whereas drugs act as electron donors. The decreased work function for CMT and LOMU enhances substrate activity, indicating stronger interactions that may improve drug delivery. We confirmed the drug’s effective interaction with amino acids without impairing proteins. Furthermore, calculated results predicted a minimal acidic environment of malignant growth, CM, NU and LOMU drugs could start to release from the Sb surface without significantly altering the structural properties. This study illustrates how Sb nanosheet holds promise as an effective carrier for drug delivery in biomedical applications.

Electrochemical C-O and C-N Arylation using Alternating Polarity in Flow for Compound Libraries.

Etherification and amination of aryl halide scaffolds are commonly used reactions in parallel medicinal chemistry to rapidly scan structure-activity relationships with abundant building blocks. Electrochemical methods for aryl etherification and amination demonstrate broad functional group tolerance and extended nucleophile scope compared to traditional methods. Nevertheless, there is a need for robust and scale-transferable workflows for electrochemical compound library synthesis. Herein we describe a platform for automated electrochemical synthesis of C-X arylation (X = NH, OH) in flow to access compound libraries. A comprehensive Design of Experiment (DoE) study identifies an optimal protocol which generates high yields across > 30 aryl halide scaffolds, diverse amines (including electron-deficient sulfonamides, sulfoximines, amides, and anilines) and alcohols (including serine residues within peptides). Reaction sequences are automated on commercially available equipment to generate libraries of anilines and aryl ethers. The unprecedented application of potentiostatic alternating polarity in flow is essential to avoid accumulating electrode passivation. Moreover, it enables reactions to be performed in air, without supporting electrolyte and with high reproducibility over consecutive runs. Our method represents a powerful means to rapidly generate nucleophile independent C-X arylation compound libraries using flow electrochemistry.