Charged Monolayers Research Articles

Interaction of Amyloid-β-(1-42) Peptide and Its Aggregates with Lipid/Water Interfaces Probed by Vibrational Sum-Frequency Generation Spectroscopy.

In this study, we use surface-sensitive vibrational sum-frequency generation (VSFG) spectroscopy to investigate the interaction between model lipid monolayers and Aβ(1-42) in its monomeric and aggregated states. Combining VSFG with atomic force microscopy (AFM) and thioflavin T (ThT) fluorescence measurements, we found that only small aggregates with probably a β-hairpin-like structure adsorbed to the zwitterionic lipid monolayer (DOPC). In contrast, larger aggregates with an extended β-sheet structure adsorbed to a negatively charged lipid monolayer (DOPG). The adsorption of small, initially formed aggregates strongly destabilized both monolayers, but only the DOPC monolayer was completely disrupted. We showed that the intensity of the amide-II' band in achiral (SSP) and chiral (SPP) polarization combinations increased in time when Aβ(1-42) aggregates accumulated at the DOPG monolayer. Nevertheless, almost no adsorption of preformed mature fibrils to DOPG monolayers was detected. By performing spectral VSFG calculations, we revealed a clear correlation between the amide-II' signal and the degree of amyloid aggregates (e.g., oligomers or (proto)fibrils) of various Aβ(1-42) structures. The calculations showed that only structures with a significant amyloid β-sheet content have a strong amide-II' intensity, in line with previous Raman studies. The combination of the presented results substantiates the amide-II(') band as a legitimate amyloid marker.

Interactions of Microorganisms with Lipid Langmuir Layers.

Preventing microbial contamination of aquatic environments is crucial for the proper supply of drinking water. Hence, understanding the interactions that govern bacterial and virus adsorption to surfaces is crucial to prevent infection transmittance. Here, we describe a new approach for studying the organization and interactions of various microorganisms, namely, Escherichia coli (E. coli) bacteria, E. coli-specific bacteriophage T4, and plant cucumber green mottle mosaic viruses (CGMMV), at the air/water interface using the Langmuir-Blodgett (LB) technique. CGMMV were found as applicable candidates for further studying their interactions with Langmuir lipid monolayers. The zwitterionic, positively, and negatively charged LB lipid monolayers with adsorbed viruses were deposited onto solid supports and characterized by atomic force microscopy. Using polymerase chain reaction, we indicated that the adsorption of CGMMV onto the LB monolayer is a result of electrostatic interactions. These insights are useful in engineering membrane filters that prevent biofouling for efficient purification systems.

Effects of the Chemical and Structural Properties of Silane Monolayers on the Organization of Water Molecules and Ions at Interfaces, from Molecular Dynamics Simulations.

Understanding the organization of the hydration layer at functionalized silica surfaces is relevant for a large range of biosensing applications or surface phenomena such as biomolecule adsorption. Silane monolayers are widely used to functionalize silica surfaces. Using molecular dynamics simulations, we have investigated the role of silane molecule head-group charge, alkyl chain length, and surface coverage in the structural organization and dynamic properties of Na+ ions, Cl- ions, and water molecules at the interface. The silane molecules studied are 3-aminopropyldimethylethoxysilane, n-propyldimethylmethoxysilane, octadecyldimethylmethoxysilane, and (dimethylamino)dimethylsilylundecanoate. Our results suggest that the distribution of interfacial ions is sensitive to the 2D dispersion of the silane-charged head groups. Also, while charged silane monolayers show a strong orientation of interfacial water molecules, which leads to a rupture in the hydrogen bond network and disturbs their tetrahedral organization, the arrangement of water molecules at the interface with uncharged silane monolayers seems to be related to the surface roughness and to alkyl chain length. In line with these results, the diffusion of ions and water molecules is higher at the CH3 long monolayer interface than at the CH3 short monolayer interface and at the charged monolayer interfaces. Also, whatever the silane molecules studied, bulk properties are recovered around 0.7 nm above the interface. The interfacial water organization is known to impact biomolecule adsorption. Therefore, these results could further help in optimizing the functionalization layers to capture analytes.

Iron Binding in an Ethylenediaminetetracetic Acid‐Based Gemini Surfactant Monolayer Film

AbstractThe ability of Fe3+ to bind to Langmuir monolayers of an N, N, N′, N′‐dialkyl‐N, N′‐diacetate ethylenediamine gemini surfactant has been explored. Fe3+ in the subphase resulted in the formation of compacted, liquid‐phase monolayers with a mesh‐like morphology at the micron length scale in comparison with expanded, unstructured liquid‐phase monolayers in the absence of iron. The response of the monolayer to subphase Fe3+ was different from that reported for Na+ and Ca2+ for an affiliated, shorter‐tail gemini surfactant. Combined surface potential and X‐ray reflectivity measurements indicated that Fe3+ induced minor conformational changes in the monolayer, suggesting ionic association with the head group. Direct evidence for the binding of iron was provided by total reflection X‐ray fluorescence measurements, which revealed that multiple ions were associated with each head group as opposed to chelating with 1:1 stoichiometry as observed with bulk ethylenediaminetetracetic acid. Cumulative data suggest the adsorption of Fex(OH)y(3x−y)+ complexes with the monolayer surface as has been reported with other charged and uncharged monolayers.

Effects of insecticide acephate on membrane mimetic systems: The role played by electrostatic interactions with lipid polar headgroups

Pesticides are important agrochemicals to yield high crop productivity but their indiscriminate use may harm the environment and human health. In order to seek a compromise between effectiveness as insecticide and safety for humans, it is essential to correlate their physiological action with molecular-level interaction with cell membranes. In this study, we found that acephate interacts preferentially with positively charged Langmuir monolayers that represent simplified cell membranes. This was proven by comparing surface pressure-molecular area (π-A) isotherms and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) data on monolayers of the zwitterionic 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC), the cationic dimethyldioctadecyl ammonium bromide (DODAB) and 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP), and the anionic dihexadecyl phosphate (DHP) and 1,2-dipalmitoyl-sn-glycero-3-phosphate (DPPA). While acephate induced a closer packing of DODAB and DPTAP monolayers upon binding to their quaternary ammonium and choline groups, respectively, almost no effects were observed in the π-A isotherms of the other lipids. Such preferred interaction between acephate and the positively-charged groups was confirmed with density-functional theory (DFT) calculations. Acephate also changed the size and zeta potential of large unilamellar vesicles (LUVs) formed with cationic lipids. Taken together these results point to a physiological action related to acephate binding to positively charged groups owing to its negative character, which may help establish conditions for the safe use of this insecticide.

Dengue fusion peptide in Langmuir monolayers: A binding parameter study

Membrane fusion is known to be the primary mechanism of entry of flaviviruses into host cells. Several studies reported the investigation of the membrane fusion mechanism mediated by the fusion peptide, a component of the membrane protein surrounding the flaviviruses. In this study, we investigated the interaction of Dengue fusion peptide (FLAg) with Langmuir monolayers to uncover the role of membrane charges and organization in its membrane binding. Binding parameters of FLAg were obtained by measuring its adsorption onto Langmuir monolayers of different types of individual lipids, as well as their mixtures. Specific peptide binding was observed in the presence of charged lipid monolayers at different pHs, revealing that the lipid composition of the membrane modulates peptide interaction, and the preference of the peptide for negatively charged lipids.

Exciton g-factors in monolayer and bilayer WSe2 from experiment and theory

The optical properties of monolayer and bilayer transition metal dichalcogenide semiconductors are governed by excitons in different spin and valley configurations, providing versatile aspects for van der Waals heterostructures and devices. Here, we present experimental and theoretical studies of exciton energy splittings in external magnetic field in neutral and charged WSe2 monolayer and bilayer crystals embedded in a field effect device for active doping control. We develop theoretical methods to calculate the exciton g-factors from first principles for all possible spin-valley configurations of excitons in monolayer and bilayer WSe2 including valley-indirect excitons. Our theoretical and experimental findings shed light on some of the characteristic photoluminescence peaks observed for monolayer and bilayer WSe2. In more general terms, the theoretical aspects of our work provide additional means for the characterization of single and few-layer transition metal dichalcogenides, as well as their heterostructures, in the presence of external magnetic fields.

Optical properties of charged nonspherical particles determined using the discrete dipole approximation

The optical properties of non-spherical particles have been studied for decades and there are a number of solution techniques to model distinct geometries. Of these methods, the Discrete Dipole Approximation (DDA) is known to compute electromagnetic scattering from irregularly shaped, heterogeneous particles. DDSCAT, which is the numerical implementation of DDA, is identified as a potential solver for electrically charged particles; however, there is a set of limitations and shortcomings to be addressed. The main concern is the conductivity, which introduces an infinitesimally thin charged monolayer on the particle surface. The side effect of this concept is a steep increase of refractive index and impedance. The DDSCAT can have trouble converging to a solution when the thin shell at the particle surface produces large losses due to having electromagnetic properties significantly different from the media on either side of the particle interface.In this paper we introduce a method to calculate the optical response of charged particles at wavelengths where charge-induced resonances typically occur. The method takes advantage of the interfaces to DDSCAT, while the conductive shell is simulated by a multi-level material distribution. The discretization involves both the 3D model of the particle and the charge distribution. The latter is determined numerically by solving the Laplace equation. The surface- and volume-averaging parameter is used to avoid large refractive indices, but the results are still accurate within a few percent. The method is validated for sensitivity and specificity in modeling optical resonances that are analytically retrievable for ideal spheres. The applicability to an irregularly shaped particle is demonstrated consequently. Implementation algorithms and numerical solvers are made publicly available, which allows light-scattering modelers to study particles in different media under different conditions.

Probing Hydrogen-Bonding Properties of a Negatively Charged MoS2 Monolayer by Powder X-ray Diffraction and Density Functional Theory Calculations.

The contributions of various noncovalent interactions in stabilization of the assembled and delaminated MoS2–hexamethylenetetramine (HMTA)-layered compound resulted from the assembly of protonated HMTA molecules and negatively charged 1T-MoS2 monolayers have been considered on the basis of powder X-ray diffraction pattern modeling, density functional theory calculations, and atoms in molecules quantum theory analysis. The structure with HMTA cations involved in NH···S bonding with MoS2 layers was concluded to be more advantageous than the alternative one with NH···N bonding between the cations. Delamination was demonstrated to essentially influence the hierarchy of interactions and leads to significant strengthening of the NH···S hydrogen bond established between HMTA and the MoS2 monolayer surface. The method applied in this study for evaluation of the monolayer MoS2 properties on the basis of the 3D structure of the MoS2–organic compound is expected to be helpful to gain insights into the interactions occurring in many MoS2-based systems.

Simulated revelation of the adsorption behaviours of acetylcholinesterase on charged self-assembled monolayers.

An acetylcholinesterase (AChE)-based electrochemical biosensor, as a promising alternative to detect organophosphates (OPs) and carbamate pesticides, has gained considerable attention in recent years, due to the advantages of simplicity, rapidity, reliability and low cost. The bio-activity of AChE immobilized on the surface and the direct electron transfer (DET) rate between an enzyme and an electrode directly determined the analytical performances of the AChE-based biosensor, and experimental studies have shown that the charged surfaces have a strong impact on the detectability of the AChE-based biosensor. Therefore, it is very important to reveal the behaviour of AChE in bulk solution and on charged surfaces at the molecular level. In this work, the adsorption orientation and conformation of AChE from Torpedo californica (TcAChE) on oppositely charged self-assembled monolayers (SAMs), COOH-SAM and NH2-SAM with different surface charge densities, were investigated by parallel tempering Monte Carlo (PTMC) and all-atom molecular dynamics simulations (AAMD). Simulation results show that TcAChE could spontaneously and stably adsorb on two oppositely charged surfaces by the synergy of an electric dipole and charged residue patch, and opposite orientations were observed. The active-site gorge of TcAChE is oriented toward the surface with the "end-on" orientation and the active sites are close to the surface when it is adsorbed on the positively charged surface and the tunnel cost for the substrate is lower than that on the negatively charged surface and in bulk solution, while for TcAChE adsorbed on the negatively charged surface, the active site of TcAChE is far away from the surface and the active-site gorge is oriented toward the solution with a "back-on" orientation. It suggests that the positively charged surface could provide a better microenvironment for the efficient bio-catalytic reaction and quick DET between TcAChE and the electrode surface. Moreover, the RMSD, RMSF, dipole moment, gyration radius, eccentricity and superimposed structures show that only a slight conformational change occurred on the relatively flexible structure of TcAChE during simulations, and the native conformation is well preserved after adsorption. This work helps us better comprehend the adsorption mechanism of TcAChE on charged surfaces and might provide some guidelines for the development of new TcAChE-based amperometric biosensors for the detection of organophosphorus pesticides.

Interaction of synthetic and lignin-based sulfonated polymers with hydrophilic, hydrophobic, and charged self-assembled monolayers.

There is a need to understand the role of polymer structure on its interaction with surfaces to produce effective functional surfaces. In this work, we produced two anionic polymers of lignin-3-sulfopropyl methacrylate (L-S) and poly(vinyl alcohol-co-vinyl acetate)-3-sulfopropyl methacrylate (PVA-S) with similar charge densities and molecular weights. On the gold-coated surface, we deposited self-assembled monolayers (SAM) bearing different terminal moieties namely, hydroxyl, carboxyl, methyl, and amine groups of alkanethiols. This study highlighted the difference between the interaction of L-S and PVA-S and functionalized self-assembled surfaces. The information was generated using advanced tools, such as an X-ray photoelectron spectroscopy (XPS), and a quartz crystal microbalance with dissipation (QCM-D), which facilitated the correlation development between polymer properties and deposition performance on the functionalized surfaces. The higher deposition of PVA-S than L-S onto OH and COOH surfaces was observed due to its greater hydrogen bonding development and higher solubility. The solubility and structure of PVA-S were also beneficial for its higher adsorption than L-S onto CH3 and NH2 surfaces. However, the variation in pH, temperature, and salt significantly affected the adsorption of the macromolecules.

The Role of Specific Ion Effects in Ion Transport: The Case of Nitrate and Thiocyanate

The selective transport of trivalent rare earth metals from aqueous to organic environments with the help of amphiphilic "extractants" is an industrially important process. When the amphiphilic extractant is positively charged or neutral, the coextracted background anions are not only necessary for charge balance but also have a large impact on extraction efficiency and selectivity. In particular, the opposite selectivity trends observed throughout the lanthanide series in the presence of nitrate and thiocyanate ions have not been explained. To understand the role of background anions in the phase transfer of lanthanide cations, we use a positively charged long-chain aliphatic molecule, modeling a common extractant, and gain molecular level insight into interfacial headgroup-anion interactions. By combining surface sensitive sum frequency generation spectroscopy with X-ray reflectivity and grazing incidence X-ray diffraction, we observed qualitative differences in the orientational and overall interfacial structure of nitrate and thiocyanate solutions at a positively charged Langmuir monolayer. Though nitrate adsorbs without dramatic changes to the solvation structure at the interface or the monolayer ordering, thiocyanate significantly alters the water structure and reduces monolayer ordering. We suggest that these qualitatively different adsorption trends help explain a reversal in system selectivity toward lighter or heavier lanthanides in solvent extraction systems in the presence of nitrate or thiocyanate anions.

Comparative study of multiple thiol-based self-assembled monolayer coatings for the SERS detection of nitrite, nitrate, and perchlorate anions in water.

Raman-based sensors represent a promising solution to enable both detection and fingerprinting of anionic pollutants in the water distribution network. Due to the weak nature of Raman scattering, a signal intensity enhancement mechanism, such as surface enhanced Raman spectroscopy (SERS), is required. Given the combination of SERS being a first layer effect and the low affinity for metallic surfaces shown by anions, functionalization of the SERS substrates using positively charged self-assembled monolayers (SAMs) is required to guarantee a strong SERS signal. In this work, the performance of three thiol-based coatings, namely, 2-mercapto-4-methyl-pyrimidine, cysteamine, and 2-dimethyl-amino-ethanethiol, is systematically compared for the detection of nitrite, nitrate, and perchlorate ions in water. For each coating, the limit of detection of those analytes is studied in combination with commercial SERS substrates. Cysteamine-coated SERS substrates are shown to provide the lowest limit of detection for the three analytes of this study. Evaluation of this coating on real drinking water samples is reported.

Doping-induced enhancement of CO2 adsorption on negatively charged C3N nanosheet: Insights from DFT calculations

It is an increasing need to explore advanced materials and technologies for CO2 capture to weaken its impact on the environment. For the first time, it is demonstrated that a suitable doping can dramatically increase CO2 adsorption capacity of negatively charged C3N nanosheets using density functional theory calculations. For example, the CO2 adsorption energy on 2e− negatively charged P doped C3N (P-C3N) nanosheet can reach −2.233 eV, which is about 600% larger than that on 2e− negatively charged C3N nanosheet. Additionally, the negatively charged P-C3N nanostructure exhibits good CO2/CH4, CO2/H2 and CO2/N2 selectivity. Therefore, P-C3N nanosheet may be a very promising negatively charge-regulated CO2 sorbent. More importantly, charge modulation strategies offer the potential for spontaneous, controllable CO2 storage and release. Furthermore, it is manifested that the increased interactions between CO2 and negatively charged P-C3N monolayer are attributed to the heterogeneous charge density distribution of P-C3N monolayer and the hybridization of p orbits of C and P atoms. These theoretical predictions could shed new light on designing feasible high-performance CO2 sorbents.

Efficient and Long-Lasting Current Rectification by Laminated Yet Separated, Oppositely Charged Monolayers

When two oppositely charged self-assembled monolayers of thiolates on gold are laminated—but with their (±) end groups kept apart by just a few angstroms—and then electrically poled, they form a sandwich structure featuring a large, permanent internal dipole. This supramolecular assembly acts as an efficient current rectifier, achieving rectification ratios exceeding 103, switching times on the order of tens of μs, and undiminished performance over at least 104 seconds of continuous operation under bias.

The influence of charge and lipophilicity of daunorubicin and idarubicin on their penetration of model biological membranes – Langmuir monolayer and electrochemical studies

The interactions of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA), with phospholipid monolayers used as simple models of cell membranes, were investigated. The results of Langmuir experiments together with Brewster angle microscopy showed that both drugs strongly affect cancer cell membranes composed of 1,2-dimyristoyl-sn-glycero-3-phospho-l-serine (DMPS). Electrostatic interactions allow positively charged DNR and IDA to interact with negatively charged DMPS polar heads but increased lipophilicity of IDA allows it to penetrate the layer more effectively than DNR and prevents from its expulsion at higher surface pressures. The analysis of the thermodynamical functions of hysteresis proves the presence of the enthalpically favorable interactions within the monolayer during its compression in the presence of idarubicin, which may form aggregates with DMPS molecules. The influence of the drugs was significantly less pronounced for a healthy cell model composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) due to the lack of strong electrostatic attractions. The interactions of drugs with pre-compressed phospholipid monolayers were also examined. The physical state of the monolayer and its packing determined only to some extent the penetration of anthracyclines. Since drug molecules first approach the polar region of the monolayer, the increase in surface pressure in time was more pronounced for negatively charged DMPS monolayers than for zwitterionic DMPC. Additionally, idarubicin was able to penetrate the precompressed DMPS monolayers more effectively than daunorubicin due to increased lipophilicity. This property of the drug was also responsible for IDA better penetration of hydrocarbon chains of supported DMPS monolayers compared to DNR, as shown by electrochemical studies.

Tunable Chemical Coupling in Two-Dimensional van der Waals Electrostatic Heterostructures.

Heterostructures of two-dimensional (2D) atomic crystals provide fascinating molecular-scale design elements for emergent physical phenomena and functional materials, as integrating distinct monolayers into vertical heterostructures can afford coupling between disparate properties. However, the available examples have been limited to either van der Waals (vdW) or electrostatic (ES) heterostructures that are solely composed of noncharged and charged monolayers, respectively. Here, we propose a "vdW-ES heterostructure" chemical design in which charge-neutral and charged monolayer-building blocks with highly disparate chemical and physical properties are conjugated vertically through asymmetrically charged interfaces. We demonstrate vdW-ES heteroassembly of semiconducting MoS2 and dielectric Ca2Nb3O10- (CNO) monolayers using an amphipathic molecular starch, resulting in the emergence of trion luminescence observed at the lowest energy among MoS2-related materials, probably due to interfacial confinement effects given by vdW-ES dual interactions. In addition, interface engineering leads to tailored exciton of the vdW/ES heterostructures owing to the pronounced dielectric proximity effects, bringing an intriguing interlayer chemistry to modify 2D materials. Furthermore, the current approach was successfully extended to create a graphene/CNO heterostructure, which verifies the versatility of the preparative method.

Self-Assembled Fluid Phase Floating Membranes with Tunable Water Interlayers.

We present a reliable method for the fabrication of fluid phase, unsaturated lipid bilayers by self-assembly onto charged Self-Assembled Monolayer (SAM) surfaces with tunable membrane to surface aqueous interlayers. Initially, the formation of water interlayers between membranes and charged surfaces was characterized using a comparative series of bilayers deposited onto charged, self-assembled monolayers by sequential layer deposition. Using neutron reflectometry, a bilayer to surface water interlayer of ∼8 Å was found between the zwitterionic phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) membrane and an anionic carboxyl terminated grafted SAM with the formation of this layer attributed to bilayer repulsion by hydration water on the SAM surface. Furthermore, we found we could significantly reduce the technical complexity of sample fabrication through self-assembly of planar membranes onto the SAM coated surfaces. Vesicle fusion onto carboxyl-terminated monolayers yielded high coverage (>95%) bilayers of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) which floated on a 7-11 Å solution interlayer between the membrane and the surface. The surface to membrane distance was then tuned via the addition of 200 mM NaCl to the bulk solution immersing a POPC floating membrane, which caused the water interlayer to swell reversibly to ∼33 Å. This study reveals that biomimetic membrane models can be readily self-assembled from solution onto functionalized surfaces without the use of polymer supports or tethers. Once assembled, surface to membrane distance can be tailored to the experimental requirements using physiological concentrations of electrolytes. These planar bilayers only very weakly interact with the substrate and are ideally suited for use as biomimetic models for accurate in vitro biochemical and biophysical studies, as well as for technological applications, such as biosensors.

The expression and characterization of recombinant cp19k barnacle cement protein from Pollicipes pollicipes.

Adhesive proteins of barnacle cement have potential as environmentally friendly adhesives owing to their ability to adhere to various substrates in aqueous environments. By understanding the taxonomic breath of barnacles with different lifestyles, we may uncover commonalities in adhesives produced by these specialized organisms. The 19 kDa cement protein (cp19k) of the stalked barnacle Pollicipes pollicipes was expressed in Escherichia coli BL21 to investigate its adhesive properties. Initial expression of hexahistidine-tagged protein (rPpolcp19k-his) yielded low levels of insoluble protein. Co-overproduction of E. coli molecular chaperones GroEL-GroES and trigger factor (TF) increased soluble protein yields, although TF co-purified with the target protein (TF-rPpolcp19k-his). Surface coat analysis revealed high levels of adsorption of the TF-rPpolcp19k-his complex and of purified E. coli TF on both hydrophobic and hydrophilic surfaces, while low levels of adsorption were observed for rPpolcp19k-his. Tag-free rPpolcp19k protein also exhibited low adsorption compared to fibrinogen and Cell-Tak controls on hydrophobic, neutral hydrophilic and charged self-assembled monolayers under surface plasmon resonance assay conditions designed to mimic the barnacle cement gland or seawater. Because rPpolcp19k protein displays low adhesive capability, this protein is suggested to confer the ability to self-assemble into a plaque within the barnacle cement complex. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

Interactions of Na+ Cations with a Highly Charged Fatty Acid Langmuir Monolayer: Molecular Description of the Phase Transition

Vibrational sum frequency spectroscopy has been used to study the molecular properties upon compression of a highly charged arachidic acid Langmuir monolayer, which displays a first-order phase tra...