Charge Transport Characteristics Research Articles

Dithienopyran-based narrow-bandgap donor polymers: Unveiling the potential for semitransparent organic solar cells with enhanced NIR absorption

Semitransparent organic solar cells (ST-OSCs) have recently received considerable attention in the field of photovoltaics owing to their great potential in applications such as building-integrated photovoltaics, self-powered greenhouses, and vehicle coatings. Because the near-infrared (NIR) region is an invisible region whose photon content is higher than that of the visible region, it is preferable to apply photoactive materials with narrow bandgaps in ST-OSCs. Tremendous efforts have been made to develop narrow-bandgap non-fullerene acceptors, however, donor polymers with NIR absorption ability for efficient ST-OSCs have rarely been reported. In this study, two novel narrow-bandgap donor polymers, PDTP-TBT and PDTTP-TBT, are designed and synthesized. Both polymers exhibit strong NIR absorption and high transmittance in the visible region, suggesting their potential for use in ST-OSCs. An opaque OSC with a PDTTP-TBT-based photoactive layer achieves a higher power conversion efficiency (PCE) of 8.87% than a PDTP-TBT-based OSC (PCE of 3.65%) due to its better charge transport characteristics. Furthermore, an ST-OSC using PDTTP-TBT-based blend film exhibits a PCE of 6.72%, average visible transmittance of 43.9%, and light utilization efficiency of 2.95%.

Enhancing charge transport and photoluminescence characteristics via transition metals doping in ITO thin films

Abstract This study presents the synthesis and characterization of pristine and transition metal (Co, Fe, and Zr)-doped indium tin oxide (ITO) thin films fabricated via RF magnetron sputtering. The effect of transition metal doping on ITO thin films properties was comprehensively examined using numerous spectroscopic and microscopic methods such as XRD, FTIR, and SEM coupled with EDX, UV–visible and PL spectroscopy, and four-probe and J–V measurements. The cubic crystal structure of the materials was confirmed through XRD spectroscopy, while FTIR results validated the existence of chemical bonds, signified by sharp peaks at 608 cm−1 and 667 cm−1 in the fingerprint region. SEM imaging revealed a granular-like agglomerated structure, with EDX confirming the elemental composition of the samples. The incorporation of Co, Fe, and Zr ions into ITO is aimed at improving photoconductivity and the optical bandgap, with the ultimate objective of enhancing performance in photovoltaic applications. Our findings showed a significant decrease in optical transmission in the visible spectrum. The bandgap also experienced a minor decrease from 3.67 eV to 3.53 eV. Analysis of the photoluminescence spectra exhibited the majority of emission peaks in the UV region, ascribed to electronic transitions occurring via band-to-band and band-to-impurity interactions within the ITO. Electrical measurements indicated lower resistance, higher current flow, and increased carrier concentration in transition metals–doped ITO compared to the undoped ITO, with Zr-doped ITO exhibiting the highest conductivity and optimal charge flow among all dopants. These promising findings in terms of optical, structural, and electrical attributes signal the potential of these materials for photovoltaic system applications.

Meticulous Molecular Engineering of Crystal Orientation and Morphology in Conjugated Polymer Thin Films for Field-Effect Transistors.

The ability to precisely tailor molecular packing and film morphology in conjugated polymers offers a robust means to control their optoelectronic properties. This, however, remains a grand challenge. Herein, we report the dependency of molecular packing of an important conjugated polymer, poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), on a set of intrinsic parameters and unveil the correlation between their crystalline structures and charge transport characteristics. Specifically, a family of PBTTT with varying side chains (i.e., hexyl, octyl, decyl, dodecyl, tetradecyl, and hexadecyl referred to as C6, C8, C10, C12, C14, and C16, respectively) and molecular weights (MWs) with a focus on C14 are judiciously designed and synthesized. Various crystalline structures are yielded by tuning the alkyl chain and MW of PBTTT together with thermal annealing. It reveals that extending the alkyl chain length of PBTTT to C14, along with a larger MW and heating at 180 °C, promotes the formation of edge-on crystallites with significantly improved orientation and ordering. Furthermore, these distinct crystalline structures greatly impact their charge mobilities. This study sheds light on the tailored design of crystalline structures in PBTTT through a synergetic approach, which paves the way for potential applications of PBTTT and other conjugated polymers in optoelectronic devices with enhanced performance.

Electrolyte‐Gated Vertical Transistor Charge Transport Enables Photo‐Switching

AbstractProposals for new architectures that shorten the length of the transistor channel without the need for high‐end techniques are the focus of very recent breakthrough research. Although vertical and electrolyte‐gate transistors are previously developed separately, recent advances have introduced electrolytes into vertical transistors, resulting in electrolyte‐gated vertical field‐effect transistors (EGVFETs), which feature lower power consumption and higher capacitance. Here, EGVFETs are employed to study the charge transport mechanism of spray‐pyrolyzed zinc oxide (ZnO) films to develop a new photosensitive switch concept. The EGVFET's diode cell revealed a current‐voltage relationship arising from space‐charge‐limited current (SCLC), whereas its capacitor cell provided the field‐effect role in charge accumulation in the device's source perforations. The findings elucidate how the field effect causes a continuous shift in SCLC regimes, impacting the switching dynamics of the transistor. It is found ultraviolet light may mimic the field effect, i.e., a pioneering demonstration of current switching as a function of irradiance in an EGVFET. The research provides valuable insights into the charge transport characterization of spray‐pyrolyzed ZnO‐based transistors, paving the way for future nano‐ and optoelectronic applications.

Acetylene-extended triarylamines for solution-processable p-channel OFETs

New acetylene-extended molecules were developed as a semiconducting layer for application in solution-processable organic field-effect transistors through coupling reactions using substituted triphenylamines as wings and diacetylene as spacer units. The influence of donor ability and spacer strength on the electrical properties was explored by developing different acetylene-extended triarylamines with D–π and D–π–π–D architectures and their structure–properties analysis. Their optical studies revealed narrow Stoke's shift and optical bandgap values, especially for highly electron-rich systems. Encouraging results supported by their electrochemical studies that revealed high HOMO energy levels ranging from –5.1 to –5.3 eV suggested a low energy barrier and good hole-transporting ability, hence, their applicability as p-channel OFETs. Furthermore, the extended conjugation in D–π–π–D based molecules relative to their corresponding D–π system caused enhanced molecular orbital overlap along the triphenylamine and facilitated good charge transport characteristics. Upon fabrication as the semiconducting channel in top-gate/bottom-contact OFET devices, the acetylene-extended D–π–π–D system showed good p-channel properties with hole mobilities up to 1.2 cm2/Vs and the highest on/off ratio of 107.

Metal oxide-embedded carbon-based materials for polymer solar cells and X-ray detectors.

This study examines the effects of hybrid nanoparticles made of NiO@rGO (reduced graphene oxide) and NiO@CNT (carbon nanotubes) on PCDTBT and PCBM active layers in glass/ITO/HTL/active-layer/LiF/Al structured bulk heterojunction (BHJ) polymer solar cells (PSCs) and X-ray photodetectors. These hybrid nanoparticles were used to create BHJ solar cells and photodetectors, and microscopic research was conducted to determine how they affect the structure of the devices. The findings show that compared to conventional matrices, the active layers with NiO@rGO and NiO@CNT incorporation have increased the charge carrier capacities and exciton dissociation properties. In order to assess their impact on the characteristics of charge transport, various weight ratios of these hybrid nanoparticles dispersed in polymer junctions are being investigated. Notably, compared to the pure PCDTBT:PCBM active layer (power conversion efficiency (PCE) = 4.35%), the NiO@CNT device has the highest PCE = 6.42% which, among the tested configurations, demonstrates its superior performance in converting sunlight into electricity. Among the tested X-ray detector materials, "NiO@CNT" achieves the best performance with a sensitivity of 1.92 mA Gy-1 cm-2. Through improved interfacial behaviors and effective charge transport, this work highlights the potential of these cutting-edge hybrid nanoparticles to enhance the performance of organic electronic devices.

Charge and spin thermoelectric transport in benzene-based molecular nano-junctions: a quantum many-body study.

Within the Coulomb blockade regime, our study delves into the charge, spin, and thermoelectric transport characteristics of a benzene-based molecular nano-junction using the Pauli master equation and linear response theory. The charge- and spin-transport studies show strong negative differential conductance features in the current-voltage (I-V) characteristics for the ortho and meta connections of electrodes on either side. Contrarily, the para-connection displays Coulomb staircase behavior. By exploring spin current behavior in the presence of spin-polarized electrodes or an external Zeeman field, we establish a methodology that facilitates precise control over the specific spin flow. Various charge and spin thermoelectric transport coefficients have been studied with varying chemical potentials. We focus on spin-polarized conductance, the Seebeck coefficient, and the figure of merit. By adjusting electrode polarization or employing an external magnetic field, we achieve an impressive peak value for the spin thermoelectric figure of merit, approximately 4.10. This outcome underscores the strategic value of harnessing both spin-polarized electrodes and external magnetic fields within the domain of spin caloritronics.

Stimuli-responsive and self-healing supramolecular Zn(II)-guanosine metal-organic gel for Schottky barrier diode application.

Spontaneous formation of a supramolecular metal-organic hydrogel using unsubstituted guanosine as a ligand and Zn2+ ions is reported. Guanosine, in the presence of NaOH, self-assembled into a stable G-quadruplex structure, which underwent crosslinking through Zn2+ ions to afford a stable hydrogel. The gel has been characterized using several spectroscopic as well as microscopic studies. The hydrogel demonstrated excellent stimuli responsiveness towards various chemicals and pH. Furthermore, the gel exhibited intrinsic thixotropic behavior and showed self-healing and injectable properties. The optical properties of the Zn-guanosine metallo-hydrogel suggested a semiconducting nature of the gel, which has been exploited for fabricating a thin film device based on a Schottky diode interface between metal and a semiconductor. The fabricated device shows excellent charge transport characteristics and linear rectifying behavior. The findings are likely to pave the way for newer research in the area of soft electronic devices fabricated using materials synthesized by employing simple biomolecules.

Towards Operando Secondary Ion Mass Spectrometry Imaging of Lithium Redistribution in Solid-State Lithium-Ion Batteries: Correlation of Structural, Chemical and Electrochemical Characteristics

Innovations in lithium-ion batteries rely crucially on the availability of advanced characterization techniques. High-resolution chemical imaging of low-Z elements e.g., lithium (Li) is often difficult in many conventional chemical analysis techniques such as Energy-Dispersive X-ray Spectroscopy. High-resolution Secondary Ion Mass Spectrometry (SIMS) imaging is a well-known technique for the analysis of all elements including isotopes. For this reason, SIMS imaging is used in numerous studies related to Li-ion battery research. While direct imaging of Li in post-mortem battery components is helpful to understand parts of the degradation mechanisms, a complete dynamic view of the evolution of the Li distribution at high resolution during operation (‘operando’) of batteries is required to fully understand the local interfacial processes, charge transport characteristics and the degradation mechanisms. A few reports presenting operando Time-of-Flight SIMS imaging of batteries have recently been published [1], but the lateral resolution demonstrated in these reports is not adequate to study local processes that occur at nanoscale.In order to demonstrate operando SIMS chemical imaging with sub-20 nm lateral resolution, we developed a novel operando methodology suitable for Focused Ion Beam (FIB)-SIMS imaging and analysis (see Fig. 1). An in-house designed magnetic-sector mass spectrometer [2] attached to a ThermoFisher SCIOS Ga+ FIB is used for SIMS chemical imaging. A special operando sample holder was designed to enable electrochemical cycling of batteries within the FIB-SIMS instrument. The micromanipulator inside the FIB (typically used for preparing thin lamellae for Transmission Electron Microscopy) is used to contact one of the battery electrodes through the operando sample holder and complete the electrical circuit. An external potentiostat is then connected to the instrument to drive the charging/discharging of batteries. The proof-of-concept experiments were performed using Li|Li7La3Zr2O12|Li symmetric half-cells. Galvanostatic cycling was performed in-situ inside the FIB-SIMS instrument until the sample failed. SIMS chemical mapping revealed a redistribution of Li during cycling. Lithium rich phases appeared during cycling which likely percolated through grain-boundaries and pores of the solid electrolyte causing a short-circuit failure. These results validate our methodology for operando analysis of Li-ion batteries with the possibility to obtain SIMS chemical images with sub-20 nm lateral resolution [3].This work was funded by the Luxembourg National Research Fund (FNR) through the grant INTER/MERA/20/13992061 (INTERBATT).[1] Y. Yamagishi, et al., J. Phys. Chem. Lett. 2021, 12, 19, 4623–4627[2] O. De Castro, et al., Analytical Chemistry, 2022, 94, 30, 10754–10763.[3] L. Cressa, et al., Analytical Chemistry, 2023, under review. Figure 1

Solar CO2 Reduction Enabled by Cascade Hole Migration.

Solar-powered photocatalytic conversion of CO2 to hydrocarbon fuels represents an emerging approach to solving the greenhouse effect. However, low charge separation efficiency, deficiency of surface catalytic active sites, and sluggish charge-transfer kinetics, together with the complicated reaction pathway, concurrently hinder the CO2 reduction. Herein, we show the rational construction of transition metal chalcogenides (TMCs) heterostructure CO2 reduction photosystems, wherein the TMC substrate is tightly integrated with amorphous oxygen-containing cobalt sulfide (CoSOH) by a solid non-conjugated polymer, i.e., poly(vinyl alcohol) (PVA), to customize the unidirectional charge-transfer pathway. In this well-defined multilayered nanoarchitecture, the PVA interim layer intercalated between TMCs and CoSOH acts as a hole-relaying mediator and meanwhile boosts CO2 adsorption capacity, while CoSOH functions as a terminal hole-collecting reservoir, stimulating the charge transport kinetics and boosting the charge separation over TMCs. This peculiar interface configuration and charge transport characteristics endow TMC/PVA/CoSOH heterostructures with significantly enhanced visible-light-driven photoactivity and CO2 conversion. Based on the intermediates probed during the photocatalytic CO2 reduction reaction, the photocatalytic mechanism was determined. Our work would inspire sparkling ideas to mediate the charge transfer over semiconductor for solar carbon neutral conversion.

Ni-based metal organic frameworks doped with reduced graphene oxide as an effective anode catalyst in direct ethanol fuel cell

Direct ethanol fuel cells (DEFCs), with their boosted energy density and efficiency, are poised to supplant secondary batteries in the near future. However, the pricy and low-durability of Pt-based anode catalyst used in these cells have hampered the development of this technology. We successfully created a Ni-MOF @ nickel foam (NF) to operate as an anode for a DEFC. We next enhanced the electrical conductivity of these produced electrodes with graphene and tested them towards ethanol oxidation in a basic solution. The study looked at the electrodes' surface shape, crystalline structure, chemical and electrical properities, among other things. Furthermore, the electrochemical activity and durability of the prepared electrodes were examined. These tests demonstrated the successful formation of the MOF @ the surface of the NF, with and without reduced graphene oxide. The produced materials outperformed plain Ni foam in terms of ethanol oxidation activity, and the graphene doping significantly enhanced this activity. A 0.35 V onset potential was obtained, with current output increasing concurrently with ethanol oxidation up to 0.5 M before stabilizing. The superior activity was attributed to the prepared electrodes' perfect nano-sheet structure, high porosity, and outstanding mass and charge transport characteristics. The addition of reduced graphene oxide enhanced charge transfer and thus improved the overall performance.

Stacking textured films on lattice-mismatched transparent conducting oxides via matched Voronoi cell of oxygen sublattice.

Transparent conducting oxides are a critical component in modern (opto)electronic devices and solar energy conversion systems, and forming textured functional films on them is highly desirable for property manipulation and performance optimization. However, technologically important materials show varied crystal structures, making it difficult to establish coherent interfaces and consequently the oriented growth of these materials on transparent conducting oxides. Here, taking lattice-mismatched hexagonal α-Fe2O3 and tetragonal fluorine-doped tin oxide as the example, atomic-level investigations reveal that a coherent ordered structure forms at their interface, and via an oxygen-mediated dimensional and chemical-matching manner, that is, matched Voronoi cells of oxygen sublattices, [110]-oriented α-Fe2O3 films develop on fluorine-doped tin oxide. Further measurements of charge transport characteristics and photoelectronic effects highlight the importance and advantages of coherent interfaces and well-defined orientation in textured α-Fe2O3 films. Textured growth of lattice-mismatched oxides, including spinel Co3O4, fluorite CeO2, perovskite BiFeO3 and even halide perovskite Cs2AgBiBr6, on fluorine-doped tin oxide is also achieved, offering new opportunities to develop high-performance transparent-conducting-oxide-supported devices.

Charge Transport Characteristics of Core-Shell SiC Filled Epoxy Nanocomposites

Charge Transport Characteristics of Core-Shell SiC Filled Epoxy Nanocomposites

Enhancing the Carrier Transport in Monolayer MoS2 through Interlayer Coupling with 2D Covalent Organic Frameworks.

The coupling of different 2D materials (2DMs) to form van der Waals heterostructures (vdWHs) is a powerful strategy for adjusting the electronic properties of 2D semiconductors, for applications in opto-electronics and quantum computing. 2D molybdenum disulfide (MoS2 ) represents an archetypical semiconducting, monolayer thick versatile platform for the generation of hybrid vdWH with tunable charge transport characteristics through its interfacing with molecules and assemblies thereof. However, the physisorption of (macro)molecules on 2D MoS2 yields hybrids possessing a limited thermal stability, thereby jeopardizing their technological applications. Herein, the rational design and optimized synthesis of 2D covalent organic frameworks (2D-COFs) for the generation of MoS2 /2D-COF vdWHs exhibiting strong interlayer coupling effects are reported. The high crystallinity of the 2D-COF films makes it possible to engineer an ultrastable periodic doping effect on MoS2 , boosting devices' field-effect mobility at room temperature. Such a performance increase can be attributed to the synergistic effect of the efficient interfacial electron transfer process and the pronounced suppression of MoS2 's lattice vibration. This proof-of-concept work validates an unprecedented approach for the efficient modulation of the electronic properties of 2D transition metal dichalcogenides toward high-performance (opto)electronics for CMOS digital circuits.

A Joint Theoretical and Experimental Study on a Tetrazole‐Anchored BODIPY‐Based Dye at the Surface of TiO2 for Dye‐Sensitized Solar Cell Applications

The performance of the created BODIPY‐based dye compound in dye‐sensitized solar cells is evaluated. The electrical and charge transport characteristics of the dye are examined using the density functional theory and time‐dependent density functional theory. By calculating EHOMO, ELUMO, λmax, Eex, light‐harvesting efficiency, reorganization energy, and the free injection energy (ΔGinj), attributes of the dye are identified. In comparison to the performance of N719 dye (5.16%), the device performance of synthesized BODIPY dye is reported to have an efficiency of 0.34%. Electrochemical outcomes are consistent with the efficiency outcomes and have a larger charge transport resistance for BODIPY (85.9 Ω) than for N719 (6.1 Ω).

Tissue Equivalent Curved Organic X-ray Detectors Utilizing High Atomic Number Polythiophene Analogues.

Organic semiconductors are a promising material candidate for X-ray detection. However, the low atomic number (Z) of organic semiconductors leads to poor X-ray absorption thus restricting their performance. Herein, the authors propose a new strategy for achieving high-sensitivity performance for X-ray detectors based on organic semiconductors modified with high -Z heteroatoms. X-ray detectors are fabricated with p-type organic semiconductors containing selenium heteroatoms (poly(3-hexyl)selenophene (P3HSe)) in blends with an n-type fullerene derivative ([6,6]-Phenyl C71 butyric acid methyl ester (PC70 BM). When characterized under 70, 100, 150, and 220kVp X-ray radiation, these heteroatom-containing detectors displayed a superior performance in terms of sensitivity up to 600 ± 11nCGy-1 cm-2 with respect to the bismuth oxide (Bi2 O3 ) nanoparticle (NP) sensitized organic detectors. Despite the lower Z of selenium compared to the NPs typically used, the authors identify a more efficient generation of electron-hole pairs, better charge transfer, and charge transport characteristics in heteroatom-incorporated detectors that result in this breakthrough detector performance. The authors also demonstrate flexible X-ray detectors that can be curved to a radius as low as 2mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard ultra-low dark current of 0.03 ± 0.01pAmm-2 .

Chain-Kinked Design: Improving Stretchability of Polymer Semiconductors through Nonlinear Conjugated Linkers.

The manipulation of the polymer backbone structure has a profound influence on the crystalline behavior and charge transport characteristics of polymers. These strategies are commonly employed to optimize the performance of stretchable polymer semiconductors. However, a universal method that can be applied to conjugated polymers with different donor-acceptor combinations is still lacking. In this study, we propose a universal strategy to boost the stretchability of polymers by incorporating the nonlinear conjugated linker (NCL) into the main chain. Specifically, we incorporate meta-dibromobenzene (MB), characterized by its asymmetric linkage sites, as the NCL into the backbone of diketopyrrolopyrrole-thiophene-based (DPP-based) polymers. Our research demonstrates that the introduction of MB prompts chain-kinking, thereby disrupting the linearity and central symmetry of the DPP conjugated backbone. This modification reshapes the polymer conformation, decreasing the radius of gyration and broadening the free volume, which consequently adjusts the level of crystallinity, leading to a considerable increase in the stretchability of the polymer. Importantly, this method increases stretchability without compromising mobility and exhibits broad applicability across a wide range of donor-acceptor pair polymers. Leveraging this strategy, fully stretchable transistors were fabricated using a DPP polymer that incorporates 10 mol % of MB. These transistors display a mobility of approximately 0.5 cm2 V-1 s-1 and prove remarkably durable, maintaining 90% of this mobility even after enduring 1000 cycles at 25% strain. Overall, we propose a method to systematically control the main-chain conformation, thereby enhancing the stretchability of conjugated polymers in a widely applicable manner.

Metal-Free Hydrazinium Halide Perovskitoid Single Crystals for X-ray Detection.

Metal-free perovskitoids (MFPs) with N2H5+ as B-site component possess higher crystal density and hydrogen bonding networks and have been recently expanded into X-ray detection. However, research on this material is in its infancy and lacks an understanding of the function of halide components on physical properties and device performance. Here, N2H5-based MFP single crystals (SCs) with different halides are fabricated, and the influence of halides on the crystal structure, band nature, charge transport characteristics, and final device performance is actively explored. Based on theory and experiments, the tolerance factor and octahedral factor jointly determine the octahedral composition. Further, halides with different electronegativities and ionic radii also affect octahedral distortion and energy band bending, further influencing carrier transport and device performance. Finally, a sensitivity of 1284 μC Gyair-1 cm-2 and low detection limits (LoD) of 5.62 μGyair s-1 were obtained by the Br-based device due to its superior physical properties.

Molecular Design Concept for Enhancement Charge Carrier Mobility in OFETs: A Review.

In the last two decades, organic field-effect transistors (OFETs) have garnered increasing attention from the scientific and industrial communities. The performance of OFETs can be evaluated based on three factors: the charge transport mobility (μ), threshold voltage (Vth), and current on/off ratio (Ion/off). To enhance μ, numerous studies have concentrated on optimizing charge transport within the semiconductor layer. These efforts include: (i) extending π-conjugation, enhancing molecular planarity, and optimizing donor-acceptor structures to improve charge transport within individual molecules; and (ii) promoting strong aggregation, achieving well-ordered structures, and reducing molecular distances to enhance charge transport between molecules. In order to obtain a high charge transport mobility, the charge injection from the electrodes into the semiconductor layer is also important. Since a suitable frontier molecular orbitals' level could align with the work function of the electrodes, in turn forming an Ohmic contact at the interface. OFETs are classified into p-type (hole transport), n-type (electron transport), and ambipolar-type (both hole and electron transport) based on their charge transport characteristics. As of now, the majority of reported conjugated materials are of the p-type semiconductor category, with research on n-type or ambipolar conjugated materials lagging significantly behind. This review introduces the molecular design concept for enhancing charge carrier mobility, addressing both within the semiconductor layer and charge injection aspects. Additionally, the process of designing or converting the semiconductor type is summarized. Lastly, this review discusses potential trends in evolution and challenges and provides an outlook; the ultimate objective is to outline a theoretical framework for designing high-performance organic semiconductors that can advance the development of OFET applications.

Tailoring Interlayer Charge Transfer Dynamics in 2D Perovskites with Electroactive Spacer Molecules.

The family of hybrid organic-inorganic lead-halide perovskites are the subject of intense interest for optoelectronic applications, from light-emitting diodes to photovoltaics to X-ray detectors. Due to the inert nature of most organic molecules, the inorganic sublattice generally dominates the electronic structure and therefore the optoelectronic properties of perovskites. Here, we use optically and electronically active carbazole-based Cz-Ci molecules, where Ci indicates an alkylammonium chain and i indicates the number of CH2 units in the chain, varying from 3 to 5, as cations in the two-dimensional (2D) perovskite structure. By investigating the photophysics and charge transport characteristics of (Cz-Ci)2PbI4, we demonstrate a tunable electronic coupling between the inorganic lead-halide and organic layers. The strongest interlayer electronic coupling was found for (Cz-C3)2PbI4, where photothermal deflection spectroscopy results remarkably reveal an organic-inorganic charge transfer state. Ultrafast transient absorption spectroscopy measurements demonstrate ultrafast hole transfer from the photoexcited lead-halide layer to the Cz-Ci molecules, the efficiency of which increases by varying the chain length from i = 5 to i = 3. The charge transfer results in long-lived carriers (10-100 ns) and quenched emission, in stark contrast to the fast (sub-ns) and efficient radiative decay of bound excitons in the more conventional 2D perovskite (PEA)2PbI4, in which phenylethylammonium (PEA) acts as an inert spacer. Electrical charge transport measurements further support enhanced interlayer coupling, showing increased out-of-plane carrier mobility from i = 5 to i = 3. This study paves the way for the rational design of 2D perovskites with combined inorganic-organic electronic properties through the wide range of functionalities available in the world of organics.