Separation Of Charge Carriers Research Articles

Huge redshift of absorption edge in a novel Z-type Bi2Sn2O7/α-Bi2O3 junction for highly efficiently visible light degradation of norfloxacin and bisphenol AF

Heterojunction was mainly used to realize the separation of charge carrier in current studies, but it did not bring about any other effect. In this paper, Bi2Sn2O7 was introduced into α-Bi2O3 to construct a direct Z-type Bi2Sn2O7/α-Bi2O3 heterojunction. It not only accelerated the rapid separation of electrons and holes, but also induced a huge redshift of absorption edge to enlarge the visible light absorption range. Such result led into the optimal sample being able to degrade 95% of norfloxacin and 92% of bisphenol AF for 90min of visible light irradiation. Under the same testing conditions, the removal efficiency of these two pollutants in the drinking water also attained 94% and 90% to demonstrate a good application. Moreover, the cycling test results indicated that the Bi2Sn2O7/α-Bi2O3 could be sustainably utilized. The electrons, holes, superoxide radical (•O2-) and hydroxyl radical (•OH) were the active substances in the process of degradation. The numbers of the Escherichia coli were 0.69×106 CFU/mL and 0.75×106 CFU/mL in the solutions after degradation to denote non-toxicity of the final products. Thus the Bi2Sn2O7/α-Bi2O3 composite could be applied in purification of various waste waters.

Ultrathin 2D Alloyed Cu−Ga−Zn−S Curved Nanobelts for Boosting Visible‐Light Photocatalytic Hydrogen Evolution

Abstract2D semiconductor nanomaterials have received significant attention as photocatalysts for solar‐to‐hydrogen conversion due to their robust light absorption capacity, large specific surface area, and superior electron transport characteristics. Nevertheless, it is challenging to develop 2D quaternary copper‐based sulfides (QCSs) with functional integration of conducive structural features for photocatalysis from multiple elements and intricate control conditions. Herein, ultrathin 2D alloyed Cu−Ga−Zn−S (CGZS) curved nanobelts (NBs) are fabricated by using a facile one‐pot colloidal method. Subsequently, the derived Cu31S16‐CGZS Janus heterostructures are designed by increasing Cu concentrations. The formation mechanism of 2D curved alloys and Janus heterostructures is systematically investigated. Without cocatalysts, curved alloyed CGZS NBs demonstrated superior photocatalytic activities of 1264.2 µmol g−1 h−1 compared to Janus heterostructured Cu31S16−CGZS (463.1 µmol g−1 h−1) under visible light (> 400 nm). Experimental and theoretical results unveiled that the improved photocatalytic activities of curved CGZS NBs can be attributed to enhanced charge–carrier separation efficiency resulting from high crystallinity and ultrathin 2D structure, abundant active sites from curved structure, high‐active (0001) crystal facet with the lowest reaction Gibbs energy, work function, and metal‐like properties. This work offers new insights into functional integration into ultrathin 2D QCSs with enhanced visible‐light photocatalytic performance.

BiVO4 Photoanode with NiV2O6 Back Contact Interfacial Layer for Improved Hole-Diffusion Length and Photoelectrochemical Water Oxidation Activity.

The short hole diffusion length (HDL) and high interfacial recombination are among the main drawbacks of semiconductor-based solar energy systems. Surface passivation and introducing an interfacial layer are recognized for enhancing HDL and charge carrier separation. Herein, we introduced a facile recipe to design a pinholes-free BiVO4 photoanode with a NiV2O6 back contact interfacial (BCI) layer, marking a significant advancement in the HDL and photoelectrochemical activity. The fabricated BiVO4 photoanode with NiV2O6 BCI layer exhibits a 2-fold increase in the HDL compared to pristine BiVO4. Despite this improvement, we found that the front surface recombination still hinders the water oxidation process, as revealed by photoelectrochemical (PEC) studies employing Na2SO3 electron donors and by intensity-modulated photocurrent spectroscopy measurements. To address this limitation, the surface of the NiV2O6/BiVO4 photoanode was passivated with a cobalt phosphate electrocatalyst, resulting in a dramatic enhancement in the PEC performance. The optimized photoanode achieved a stable photocurrent density of 4.8 mA cm-2 at 1.23 VRHE, which is 12-fold higher than that of the pristine BiVO4 photoanode. Density Functional Theory (DFT) simulations revealed an abrupt electrostatic potential transition at the NiV2O6/BiVO4 interface with BiVO4 being more negative than NiV2O6. A strong built-in electric field is thus generated at the interface and drifts photogenerated electrons toward the NiV2O6 BCI layer and photogenerated holes toward the BiVO4 top layer. As a result, the back-surface recombination is minimized, and ultimately, the HDL is extended in agreement with the experimental findings.

Long-lasting, fast-switchable photochromism in Na0.5Bi0.5TiO3 induced by photocatalytic memory effect, and its subsequently enhanced piezoelectric response and catalytic performances

A ferroelectric ceramic material of Na0.5Bi0.5TiO3 was found to possess a pronounced, long-lasting, and fast-switchable photochromic behavior responsive to visible light. The working mechanism of its photochromism could be attributed to an interesting photocatalytic memory effect, during which photogenerated electrons were trapped by Bi3+/Ti4+ and oxygen vacancies generated in Na0.5Bi0.5TiO3. The release kinetics of trapped electrons could be modulated by controlling environment conditions to make its photochromism phenomenon both long-lasting and fast-switchable to meet various application requirements. In the meantime, the photochromism process changed its inner electronic structure, resulting in stronger oxidation capability, increased piezoelectric response, improved charge carrier separation and transfer, and more active oxygen species production. Thus, its photocatalytic, piezocatalytic and photopiezocatalytic performances were all significantly enhanced as demonstrated by its TC-HCl degradation performances. This work offered a novel approach to search for and design inorganic photochromic materials with good reversibility for various technical applications.

Fluoride Ions Post-Treatment Regulates Interfacial Charge Separation and Transport to Promote Solar Water Splitting of Bismuth Vanadate.

Herein, we propose a simple and effective fluoride (F-) ions post-treatment method to improve the solar water splitting performance of BVO. The surface modification of BVO with functional F- ions not only facilitates the transfer and separation efficiency of carriers at the electrode/electrolyte interface but also promotes the adsorption and activation of water, resulting in a photocurrent of 3.2 mA/cm2 at a bias voltage of 1.2 VRHE. Furthermore, the transfer and separation of carriers in the bulk and on the surface are further regulated by the oxygen vacancies induced by F- ions, thereby enhancing the PEC water splitting performance of BVO. Notably, the experimental findings demonstrate that the inclusion of F- ions in the KBi electrolyte enhances the photo-charging process of BVO. Specifically, at a bias voltage of 0.6 VRHE, the BVO-0.12F sample exhibits a stable photocurrent of 1.2 mA/cm2, which is twice as high as that of the initial BVO sample. Remarkably, our study unveils that the addition of F- ions into the KBi electrolyte solution plays a pivotal role in facilitating the separation of charge carriers and promoting interfacial charge transport. Consequently, this further leads to a substantial enhancement in the solar water splitting performance for BVO-0.12F photoanode.

C3N5 nanosheets decorated with Cu–Pt alloy nanoparticles toward efficient photocatalytic hydrogen evolution

The construction of highly efficient photocatalysts for generating high-purity hydrogen (H2) through a sustainable water decomposition system is a feasible option to replace conventional non-renewable energy resources. Here, we report a simple chemical reduction approach to embed Cu–Pt alloy nanocrystals on the C3N5 (CN) matrix, creating a Schottky heterojunction. The structural morphology, crystal phase, light-harvesting capacity, and photo-electrochemical properties of as-prepared heterostructures were investigated. The uniformly anchored Cu–Pt alloy nanocrystals improve the photocatalytic H2 evolution (PHE) activity by promoting the separation and transfer of photogenerated carriers and inhibiting recombination. Meanwhile, the alloyed nanocrystals strengthen the absorption of incident light energy, inducing photothermal energy. This improves the charge carrier separation and promotes the surface reaction kinetics. The PHE performance of as-developed catalysts could be adjusted by optimizing the molar ratio of Cu/Pt ions. Among them, the optimal Cu1Pt3/CN photocatalyst yields a higher PHE performance (672.85 μmol g−1 h−1). Notably, the Cu1Pt3/CN catalyst also reveals an enhanced photocatalytic activity for H2 evolution in natural seawater. The possible PHE mechanism in CuPt/CN heterostructures is discussed toward the role of CuPt alloy deposition in boosting photocatalytic efficiency.

Regulation of Charge Transfer Pathway in Ag-ZnIn2S4 Nanowires for Visible Photodynamic Therapy on Candida Albicans Infections.

Photodynamic therapy (PDT) is receiving extensive attention as an antimicrobial strategy that does not cause drug resistance by reactive oxygen species (ROS). Herein, hierarchical Ag-ZnIn2S4 (Ag-ZIS) core-shell nanowires are synthesized by in situ Metal-Organic Framework derived method for efficient PDT of Candida albicans (C. albicans). The core-shell structure enables spatial synergy strategy to regulate the charge transfer pathway under visible light excitation, in which the Ag nanowires are like the highway for the photogenerated electrons. The enhanced charge carrier separation efficiency greatly increased the chances for the generation of ROS. As expected, the optimized Ag-ZIS nanowires exhibit excellent performance for inactivation of C. albicans under visible light irradiation (λ ≥ 420 nm, 15 min), and the effective sterilization concentration is as high as 107CFU mL-1. Moreover, in vivo infection experiments suggested that the PDT effect of Ag-ZIS nanowires on the mouse wound healing is better than that of the clinical Ketoconazole drug. The PDT antifungal mechanism of Ag-ZIS nanowires is also investigated, and superoxide anion is found to be the predominant active species to causes C. albicans damage. This work provides a new perspective for designing novel interface structures to regulate charge transfer to achieve efficient PDT antifungal therapy.

Full-Space Electric Field in Mo-Decorated Zn2In2S5 Polarization Photocatalyst for Oriented Charge Flow and Efficient Hydrogen Production.

Integration of photocatalytic hydrogen (H2) evolution with oxidative organic synthesis presents a highly attractive strategy for the simultaneous production of clean H2 fuel and high-value chemicals. However, the sluggish dynamics of photogenerated charge carriers across the photocatalysts result in low photoconversion efficiency, hindering the wide applications of such a technology. Herein, we overcome this limitation by inducing the full-space electric field via charge polarization engineering on a Mo cluster-decorated Zn2In2S5 (Mo-Zn2In2S5) photocatalyst. Specifically, this full-space electric field arises from a cascade of the bulk electric field (BEF) and local surface electric field (LSEF), triggering the oriented migration of photogenerated electrons from [Zn-S] regions to [In-S] regions and eventually to Mo cluster sites, ensuring efficient separation of bulk and surface charge carriers. Moreover, the surface Mo clusters induce a tip enhancement effect to optimize charge transfer behavior by augmenting electrons and proton concentration around the active sites on the basal plane of Zn2In2S5. Notably, the optimized Mo1.5-Zn2In2S5 catalyst achieves exceptional H2 and benzaldehyde production rates of 34.35 and 45.31mmol gcat -1 h-1, respectively, outperforming pristine ZnIn2S4 by 3.83- and 4.15-fold. Our findings mark a significant stride in steering charge flow for enhanced photocatalytic performance. This article is protected by copyright. All rights reserved.

Performance optimization of CsPbIBr2-based perovskite solar cells through device modeling

Among all-inorganic perovskite materials, CsPbIBr2 provides the optimal equilibrium between optical bandgap and phase stability. However, notwithstanding these advantageous, interfacial defects and improper band alignment continue to diminish the photovoltaic efficacy of CsPbIBr2-based PSCs. This study used the SCAPS-1D software to undertake a thorough examination of operating mechanism of CsPbIBr2-based devices. A comprehensive analysis is conducted on a range of physical parameters pertaining to the FTO/ZnOS/CsPbIBr2/CZTS configuration, encompassing doping concentration, operating temperature, defect density, electron affinity, thickness, series and shunt resistance. The simulation outcomes revealed that PSCs characterized by a low defect density and an ideal band structure enhance the performance of the devices by facilitating the transport and separation of charge carriers. The optimized device achieved an efficiency of 16.68%, short-circuits current density (JSC) of 11.52 mA cm−2, open-circuit voltage (VOC) of 1.64 V, and Fill factor (FF) of 87.83%. These simulation findings will provide useful information for experimental fabrication of efficient CsPbIBr2-based inorganic PSC.

Efficiency and Mechanistic Insights of Photocatalytic Decomposition of Tetracycline and Rhodamine B utilizing Z-scheme g-C3N4/SnWO4 Heterostructures under Visible Light Irradiation

The hydrothermal approach was used in the design and construction of the SnWO4 (SW) nanoplates anchored g-C3N4 (gCN) nanosheet heterostructures. Morphology, optical characteristics, and phase identification were investigated. The heterostructure architect construction and successful interface interaction were validated by the physicochemical characteristics. The test materials were used as a photocatalyst in the presence of visible light to break down the antibiotic tetracycline (TC) and the organic Rhodamine B (RhB). The best photocatalytic degradation efficiency of TC (97%) and RhB (98%) pollutants was demonstrated by the optimized 15 mg of gCNSW-7.5 in 72 and 48 minutes, respectively, at higher rate constants of 0.0409 and 0.0772 min–1. The interface contact between gCN and SW, which successfully enhanced charge transfer and restricted recombination rate in the photocatalyst, is responsible for the enhanced performance of the gCNSW heterostructure photocatalyst. In addition, the gCNSW heterostructure photocatalyst demonstrated exceptional stability and reusability over the course of four successive testing cycles, highlighting its durable and dependable function. Superoxide radicals and holes were shown to be key players in the degradation of contaminants through scavenger studies. The charge transfer mechanism in the heterostructure is identified as Z-scheme mode with the help of UV-vis DRS analysis. Attributed to its unique structural features, and effective separation of charge carriers, the Z-scheme gCNSW-7.5 heterostructure photocatalyst exhibits significant promise as an exceptionally efficient catalyst for the degradation of pollutants. This positions it as a prospective material with considerable potential across various environmental applications.

Ultrathin TiS2@N,S-Doped Carbon Hybrid Nanosheets as Highly Efficient Photoresponsive Antibacterial Agents.

Nanobactericides are employed as a promising class of nanomaterials for eradicating microbial infections, considering the rapid resistance risks of conventional antibiotics. Herein, we present a pioneering approach, reporting the synthesis of two-dimensional titanium disulfide nanosheets coated by nitrogen/sulfur-codoped carbon nanosheets (2D-TiS2@NSCLAA hybrid NSs) using a rapid l-ascorbic acid-assisted sulfurization of Ti3C2Tx-MXene to achieve efficient alternative bactericides. The as-developed materials were systematically characterized using a suite of different spectroscopy and microscopy techniques, in which the X-ray diffraction/Raman spectroscopy/X-ray photoelectron spectroscopy data confirm the existence of TiS2 and C, while the morphological investigation reveals single- to few-layered TiS2 NSs confined by N,S-doped C, suggesting the successful synthesis of the ultrathin hybrid NSs. From in vitro evaluation, the resultant product demonstrates impressive bactericidal potential against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria, achieving a substantial decrease in the bacterial viability under a 1.2 J dose of visible-light irradiation at the lowest concentration of 5 μg·mL-1 compared to Ti3C2Tx (15 μg·mL-1), TiS2-C (10 μg·mL-1), and standard antibiotic ciprofloxacin (15 μg·mL-1), respectively. The enhanced degradation efficiency is attributed to the ultrathin TiS2 NSs encapsulated within heteroatom N,S-doped C, facilitating effective photogenerated charge-carrier separation that generates multiple reactive oxygen species (ROS) and induced physical stress as well as piercing action due to its ultrathin structure, resulting in multimechanistic cytotoxicity and damage to bacterial cells. Furthermore, the obtained results from molecular docking studies conducted via computational simulation (in silico) of the as-synthesized materials against selected proteins (β-lactamasE.coli/DNA-GyrasE.coli) are well-consistent with the in vitro antibacterial results, providing strong and consistent validation. Thus, this sophisticated study presents a simple and effective synthesis technique for the structural engineering of metal sulfide-based hybrids as functionalized synthetic bactericides.

Synthesis and Characterization of WO3/BiVO4/Graphene Ternary Nanocomposites for the Photodegradation of Methlyene Blue and Tetracycline

In this study, a hydrothermal method was employed to synthesize the ternary nanocomposites comprising WO3/BiVO4/Graphene, all driven by visible light. The characteristics of these nanocomposites were interpreted through techniques such as UV–Vis, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and photoluminescence spectroscopy (PL). The enhanced performance of the composite, attributed to its heightened capability for separating charge carriers, outperformed that of the individual semiconductor components. The PL results validated the composite's improved charge separation. The nanocomposites have weaker PL peaks, indicating slower e−/h+ recombination. The balanced concentrations of the mixed semiconductors in the composite affected both PL intensity and photodegradation efficiency. The photocatalytic degradation of methylene blue (MB) and tetracycline (TC) was observed by nanocomposites. The heterogeneous nanocomposite WOBV/G-5 with 0.03 mg graphene content has a better photocatalytic activity for both MB (63 %) and TC (80 %) than other concentrations. It has also been investigated using TOC and COD analysis. Moreover, zeta potential analysis and pH analysis have been done to check the conductivity of optimized photocatalyst. Additionally, to check the stability of WOBV/G-5 photocatalyst, recyclability test that shows 58 % degradation rate after five cycles and analysis of XRD after recyclability have also been performed. Role of active species (h+, O2−, and OH.) was observed by using different scavengers (EDTA, BQ, and IPA) in trapping experiment that plays a vital role in photocatalytic degradation process.

Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration

AbstractPhotocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD‐COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 μmol g−1 h−1 in O2 and air) than TBC‐COF with hcb topology through the O2‐O2⋅−‐H2O2, O2‐O2⋅−‐O21‐H2O2, and H2O‐H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅− generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O21, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high‐performance photocatalysts for H2O2 production by topological structure modulation.

Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration.

Photocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD-COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 μmol g-1 h-1 in O2 and air) than TBC-COF with hcb topology through the O2-O2⋅--H2O2, O2-O2⋅--O2 1-H2O2, and H2O-H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅- generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O2 1, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high-performance photocatalysts for H2O2 production by topological structure modulation.

MoS2@MWCNTs with Rich Vacancy Defects for Effective Piezocatalytic Degradation of Norfloxacin via Innergenerated-H2O2: Enhanced Nonradical Pathway and Synergistic Mechanism with Radical Pathway.

Molybdenum disulfide (MoS2)-based materials for piezocatalysis are unsatisfactory due to their low actual piezoelectric coefficient and poor electrical conductivity. Herein, 1T/3R phase MoS2 grown in situ on multiwalled carbon nanotubes (MWCNTs) was proposed. MoS2@MWCNTs exhibited the interwoven morphology of thin nanoflowers and tubes, and the piezoelectric response of MoS2@MWCNTs was 4.07 times higher than that of MoS2 via piezoresponse force microscopy (PFM) characterization. MoS2@MWCNTs exhibited superior activity with a 91% degradation rate of norfloxacin (NOR) after actually working 24 min (as for rhodamine B, reached 100% within 18 min) by pulse-mode ultrasonic vibration-triggered piezocatalysis. It was found that piezocatalysis for removing pollutants was attributed to the synergistic effect of free radicals (•OH and O2•-) and nonfree radical (1O2, key role) pathways, together with the innergenerated-H2O2 promoting the degradation rate. 1O2 can be generated by electron transfer and energy transfer pathways. The presence of oxygen vacancies (OVs) induced the transformation of O2 to 1O2 by triplet energy transfer. The fast charge transfer in MoS2@MWCNTs heterostructure and the coexistence of sulfur vacancies and OVs enhanced charge carrier separation resulting in a prominent piezoelectric effect. This work opens up new avenues for the development of efficient piezocatalysts that can be utilized for environmental purification.

A novel type-II–II heterojunction for photocatalytic degradation of LEV based on the built-in electric field: carrier transfer mechanism and DFT calculation

Heterojunctions play a crucial role in improving the absorption of visible light and performance of photocatalysts for organic contaminants degradation in water. In this work, a novel type-II–II Ag2CO3/Bi2WO6 (AB) heterojunction was synthesized by hydrothermal reaction and in situ-precipitation methods. The mechanisms of charge transfer and carrier separation at the interface of heterojunctions and the influence on the photocatalytic activity were investigated. The degradation of levofloxacin (LEV) under visible light irradiation was employed to evaluate the photocatalytic performance of AB. The results showed that 85.4% LEV was degraded by AB, which was 1.38 and 1.39 times higher than that of Bi2WO6 and Ag2CO3, respectively. The work functions of the different crystal planes in the AB heterojunction, which was calculated by density functional theory, are a significant difference. The Fermi energy (Ef) of Ag2CO3 (− 6.005 eV) is lower than Bi2WO6 (− 3.659 eV), but the conduction band (CB) is higher. Therefore, using AB heterojunctions as an example, the research explored the mechanism of type-II–II which CB and Ef of one semiconductor cannot simultaneously surpass those of another material, based on the built-in electric field theory. Through this analysis, a deeper understanding of type-II heterojunctions was achieved, and providing valuable insights into the behavior of this specific heterojunction system.

Unraveling Interfacial Photoinduced Charge Transfer and Localization in CsPbBr3 Nanocrystals/Naphthalenediimide.

Halide perovskites have attracted much attention for energy conversion. However, efficient charge carrier generation, separation, and mobility remain the most important issues limiting the higher efficiency of solar cells. An efficient interfacial charge transfer process associated with exciton dynamics between all-inorganic CsPbBr3 nanocrystals and organic electron acceptors has been suggested. We observed a strong PL quenching of 78% in thin films when silane-functionalized naphthalenediimides (SNDI), used as electron-acceptors, are anchored on CsPbBr3 nanocrystals. Optical and structural characterizations confirm the charge transfer process without QDs degradation. The issue of whether these transferred charges are indeed available for utilization in solar cells remains uncertain. Our results reveal that the CsPbBr3 nanocrystals capped with these electron-acceptor SNDI molecules show a drastic increase in the electrical resistance and the absence of a photoconductivity effect. The results suggest charge transfer followed by strong localization of the charge carriers, preventing their extraction toward the electrodes of solar cell devices. We hope that this crucial aspect to attract attention and unveil a potential mechanism for charge delocalization, which could, in turn, lead to a groundbreaking enhancement in solar cell efficiency.

Sensitizer created defective metal organic framework as a new platform for boosting visible-light photocatalysis of g-C3N4

We developed herein for the first time a sensitizer created defective MOF (SCD-MOF), simultaneously possessing sensitizers and defects as visible-light harvester and electron trapper, respectively, which can synergistically improve the visible-light photocatalysis of polymeric graphitic carbon nitride (g-C3N4). Based on this discovery, the resulting 5.0 wt% FeTCPP⊂UiO-66@g-C3N4 shows a significant 6.6 and 3.9 times improvement in catalytic efficiency compared with its parent materials of FeTCPP⊂UiO-66 and g-C3N4 in degrading organic pollutants. Moreover, it shows a 10.4 times enhancement in catalytic efficiency compared with commercial TiO2 (P25). Mechanism studies suggest that sensitizer molecules and defects in SCD-MOF can synergistically improve photocatalytic efficiency because of broadening the visible-light response and strengthening the charge carrier separation. This work illustrates a remarkably triple synergetic effect among visible-light harvester, electron/hole separator, and semiconductor and thus established SCD-MOF as a class of new platform to greatly improve the visible-light photocatalytic performance of conventional semiconductors.

Surface-Grafted Single-Atomic Pt-Nx Complex with a Precisely Regulating Coordination Sphere for Efficient Electron Acceptor-Inducing Interfacial Electron Transfer.

Based on the electron-withdrawing effect of the Pt(bpy)Cl2 molecule, a simple post-modification amide reaction was firstly used to graft it onto the surface of NH2-MIL-125, which formed a highly efficient electron acceptor that induced the conversion of the photoinduced charge migration pathway from internal BDC→TiOx migration to external BDC→PtNx migration, significantly improving the efficiency of photoinduced electron transfer and separation. Furthermore, precise control over the first coordination sphere of Pt single atoms was achieved using further post-modification with additional bipyridine to investigate the effect of Pt-Nx coordination numbers on reaction activity. The as-synthesized NML-PtN2 exhibited superior photocatalytic hydrogen evolution activity of 7.608 mmol g-1 h-1, a remarkable improvement of 225 and 2.26 times compared to pristine NH2-MIL-125 and NML-PtN4, respectively. In addition, the superior apparent quantum yield of 4.01% (390 nm) and turnover frequency of 190.3 h-1 (0.78 wt% Pt SA; 129 times compared to Pt nanoparticles/NML) revealed the high solar utilization efficiency and hydrogen evolution activity of the material. And macroscopic color changes caused by the transition of carrier migration paths was first observed. It holds profound significance for the design of MOF-Molecule catalysts with efficient charge carrier separation and precise regulation of single-atom coordination sphere.

Surface‐Grafted Single‐Atomic Pt‐Nx Complex with a Precisely Regulating Coordination Sphere for Efficient Electron Acceptor‐Inducing Interfacial Electron Transfer

Based on the electron‐withdrawing effect of the Pt(bpy)Cl2 molecule, a simple post‐modification amide reaction was firstly used to graft it onto the surface of NH2‐MIL‐125, which formed a highly efficient electron acceptor that induced the conversion of the photoinduced charge migration pathway from internal BDC→TiOx migration to external BDC→PtNx migration, significantly improving the efficiency of photoinduced electron transfer and separation. Furthermore, precise control over the first coordination sphere of Pt single atoms was achieved using further post‐modification with additional bipyridine to investigate the effect of Pt‐Nx coordination numbers on reaction activity. The as‐synthesized NML‐PtN2 exhibited superior photocatalytic hydrogen evolution activity of 7.608 mmol g−1 h−1, a remarkable improvement of 225 and 2.26 times compared to pristine NH2‐MIL‐125 and NML‐PtN4, respectively. In addition, the superior apparent quantum yield of 4.01% (390 nm) and turnover frequency of 190.3 h−1 (0.78 wt% Pt SA; 129 times compared to Pt nanoparticles/NML) revealed the high solar utilization efficiency and hydrogen evolution activity of the material. And macroscopic color changes caused by the transition of carrier migration paths was first observed. It holds profound significance for the design of MOF‐Molecule catalysts with efficient charge carrier separation and precise regulation of single‐atom coordination sphere.