Characterization Of Films Research Articles

Trends Research Characterization of TiO2 Thin Films as Solar Cell Materials (2015-2024): A Systematic Review

Research in the field of solar cells continues to increase along with the development of the times and human needs for renewable energy sources. One of the fields of study that is often used as a research topic is the development of Thin Film Solar Cells or known as Thin Film Solar Cells (TFSC). This research aims to identify and analyze research trends of synthesis of Ti02 thin films as solar cell materials. This research method is descriptive and analytical. The data used in this research was obtained from documents indexed by Google Scholar from 2015-2024 using Publish or Perish and Dimension.ai. Research procedures use PRISMA guidelines. The data identified and analyzed are the type of publication, publication source, and the title of research on synthesis of Ti02 thin films as solar cell materials that is widely cited. The data analysis method uses bibliometric analysis assisted by VOS viewer software. The results of the analysis show that research trend on synthesis of TiO2 thin films as solar cell materials indexed by Google Scholar from 2015 to 2024 has experienced increases and decreases. There are many documents in the form of articles, proceedings, chapters, preprints, monograph and edited books that discuss research about synthesis of Ti02 thin films as solar cell materials. Key words that are often used in research about it are dye sensitized cell, electrode, electron, characterization, etc.

Effect of Deposition Temperature on Zn Interstitials and Oxygen Vacancies in RF-Sputtered ZnO Thin Films and Thin Film-Transistors.

ZnO thin films were deposited using RF sputtering by varying the argon:oxygen gas flow rates and substrate temperatures. Structural, optical and electrical characterization of ZnO thin films were systematically carried out using X-Ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible spectroscopy, X-Ray photoelectron spectroscopy (XPS) and Hall measurements. Film deposited at room temperature and annealed at 300 °C exhibited low O2 incorporation with localized defects and a high percentage of Zn interstitials. A large crystalline size and fewer grain boundaries resulted in a high Hall mobility of 46.09 cm2/V-s Deposition at higher substrate temperatures resulted in improvement in O2 incorporation through the annihilation of localized defects and decrease in oxygen vacancies and Zn interstitials. Urbach tails within the bandgap were identified using the absorption spectrum and compared with the % defects from XPS. Bottom-gate thin-film transistors were subsequently fabricated on a SiO2/p-Si substrate using the combination of RF sputtering, wet etching and photolithography. Variation in the substrate temperature showed performance enhancement in terms of the leakage current, threshold voltage, sub-threshold swing and ION/IOFF ratio. Thin-film transistor (TFT) devices deposited at 300 °C resulted in an O2-rich surface through chemisorption, which led to a reduction in the leakage current of up to 10-12 A and a 10-fold reduction in the sub-threshold swing (SS) from 30 V to 2.8 V. Further TFT optimization was carried out by reducing the ZnO thickness to 50 nm, which resulted in a field-effect mobility of 1.1 cm2/V-s and ION/IOFF ratio of 105.

Dual-Responsive PIL Films with Gold Nanoparticles: Tailoring Electrical Responses to pH and Thermal Stimuli.

In recent years, stimuli-responsive poly(ionic liquids) (PILs) have attracted great attention. The stimuli-dependent properties, particularly the electrical properties, of multiresponsive PILs incorporating functionalized nanoparticles, however, have been less investigated. In this work, we present the synthesis, characterization, and application of PIL films incorporating pH- and thermoresponsive hybrid materials composed of gold nanoparticles functionalized with poly(2-(dimethylamino)ethyl methacrylate) (Au@PDMAEMA). The Au@PDMAEMA nanoparticles exhibit distinct responsiveness to changes in environmental pH and temperature, thereby altering the electrical properties of the PIL films blended with responsive gold nanoparticles (PIL w/Au). This research not only fills a gap in the study of electrical properties of multiresponsive nanoparticle-incorporated PILs but also extends the potential applications of PILs in various fields, including smart sensors and electronic devices.

Preparation and Characterization of Nanostructured ITO Thin Films by Spray Pyrolysis Technique: Dependence on Annealing Temperature

Transparent conducting oxides (TCOs) like Indium tin oxide (ITO) have wide attention from all scientists which have low resistance and high visible light transmittance, used as transparent electrodes in many optoelectronic devices such as liquid crystal displays, touch screens, light emitting diodes, and solar cells. In this research, the relationship between the crystallization, optical transmittance, and surface roughness of nanostructured ITO thin films and the change in annealing temperature was investigated. To enhance the efficiency of this material in optoelectronic applications, both the optical transmittance in the visible region and the crystallite size must be increased. These results can be obtained by the heat treatment of the films. Nanostructured ITO thin layer films have been successfully prepared at a substrate temperature equal to (350)℃ by chemical spray pyrolysis (CSP) technique. The physical characterizations of nanostructured ITO thin layer films were investigated at different annealing temperatures (400,450 and 500)℃. The presence of diffraction peaks indicates that the as-deposited and post annealed films are polycrystalline cubic structure and the peak (400) is a preferred growth orientation. For all samples the value of intensity of diffraction peaks increases with increasing substrate temperature. The crystallite size of nanostructured ITO thin films is strongly related to the annealing temperature. The crystallite size estimated from XRD was found to rise with rising annealing temperature. The surface roughness of nanostructured ITO thin layer films increases with rising annealing temperature. High values of transmittance have been measured in the visible region 550 nm equal to (70, 82, 84 and 88)% corresponding to annealing temperature (350,400,450 and 500)℃ respectively.

Fabrication and Characterization of Aluminum-Doped Nickel Oxide Thin Films for Optoelectronic Applications using the SILAR Method

Study’s Excerpt The effect of varying annealing times on 10% Aluminum-doped Nickel Oxide (ANO) thin films, deposited via the SILAR technique is presented. SEM and RBS analyses were used for detailed correlation between annealing time and the film's microstructural improvements. ANO thin films could be used for advanced technological applications. Full Abstract The effect of varying the annealing time of %10 aluminium-doped Nickel Oxide thin film was studied to understand the possible effect on the optical, structural, and electrical properties of %10 aluminium-doped Nickel Oxide (ANO) for possible application. The thin films were deposited on glass substrates using the successive ionic layer adsorption reaction (SILAR) deposition technique. The samples formed were annealed at 3000C, and the annealing time varied at 1.35 hrs., 1.45 hrs., 1.55 hrs., and 2 hrs, respectively. The deposited films were characterized to obtain the optical, electrical, and structural characteristics and the compositional constituent of the film using the double beam photo spectrometer, Four-Point Probe, Scanned electron Microscope, Energy Dispersion Spectroscopy, and X-ray Diffractometer. The films were observed to have low absorbance in the range of 0.1 to 0.01 and high % transmittance within the range of 80% - 98% in the visible region of the spectrum. The reflectance of the film was observed to decrease with an increase in annealing time in the range of 10% - 2.5%, all in the visible region of the spectrum. The crystallite size of the deposited films decreased with increased annealing time with the structural formation of simple cubic phase NiO thin film. SEM micrograph of the thin films reveals that an increase in annealing time improved the crystallinity of the films with the grain size evenly distributed. The EDS result of the deposited films revealed the presence of nickel, aluminum and Oxygen as the major constituent of the deposited films. The Ruther Ford Backscattering (RBS) analysis of the thickness of the films shows an increase in the thickness with an increase in annealing time. Clearer compositions of the films were also seen from the RBS analysis. Their electrical properties revealed that the films formed had low electrical resistivity and high conductivity, so they could be useful in making optoelectronics devices and corrosion resistance.

Effects of heavy alkali metals (Rb, Cs) post-deposition treatments on CuInGaSe2 using a spin-coating technique

Abstract This study used a controlled environment to explore the post-deposition treatment (PDT) effects on CuInGaSe2 (CIGSe2) semiconducting thin films using a non-vacuum spin-coating technique for doping the CIGSe layers with Cs and Rb. The structural characterization confirmed the successful deposition of chalcopyrite structures with no phases belonging to any alkali metals after the PDT, with crystallite sizes in the range between 40-67 nm, and with a slight change in the X Ray Diffraction (XRD) peak positions indicating a change from copper-rich to copper-poor phases. The morphological studies confirmed the increase in grain sizes after the PDT. The EDS chemical studies showed that there is a reduction in the copper content after PDT. The topographical studies showed a change in the surface morphology with modifications of the grain parameters. In addition, the electrical characterization showed a significant increase of the effective carrier mobility after the treatments, consistent with the grain size increase observed by both microscopic (SEM and AFM) studies. Raman characterization of the CIGSe2 films showed the A1 optical phonon mode of CIGS chalcopyrite structures and peaks at lower frequencies belonging to ordered vacancy compounds (OVCs). The deconvolution of the Raman spectroscopy broad peaks for the CIGSe2 films after their PDT confirmed the formation of alk-InSe2 OVC phases on top of the absorber layer.

Preparation and Characterization of PLA-Based Films Fabricated with Different Citrus Species Peel Powder

The present study aimed to investigate whether different citrus peel powders (orange, mandarin, and lemon) could be incorporated into polylactic acid (PLA), for the preparation and characterization of biodegradable films made of this fruit waste. In particular, films were prepared by the solvent casting method and tested in terms of physicochemical and biochemical parameters, along with mechanical properties. Furthermore, the citrus peel powders were tested for their physicochemical and biochemical properties after ethanolic extraction. The results showed that the addition of citrus powders into PLA proved to be efficient compared to the control films (PLA). The citrus peel-based films showed high antioxidant capacity (38.37%–32.54%), a considerable total phenolic content (17.2–12.58 mg GAE/L), good lightness (L*: 42.83–41.93), elastic Young’s modulus (257.95–175.38 MPa), oxygen transmission rate (976.5 mL m−2 day−1–1218 mL m−2 day−1), elongation at break (183.06%–135.95%), and tensile strength (6.15–4.56 MPa), which were affected significantly (p < 0.05) by the botanical origin of citrus peel. Concerning the citrus peel extracts, the highest values in antioxidant capacity (52.56%), total phenolic content (724.8 mg GAE/L), and titratable acidity (714.67 mg of citric acid/L) were recorded in the extract of lemon peel powders. The corresponding values for orange peel powder extracts were 39.43%, 563.8 mg GAE/L, and 576 mg of citric acid/L, while those for mandarin were 33.01%, 558.46 mg GAE/L, and 54.67 mg of citric acid/L. The application of multivariate analysis of variance and linear discriminant analysis on the mechanical properties, physicochemical, and biochemical data resulted in the differentiation of pure PLA and PLA-based films fabricated with citrus peel powder. From the above findings, it is concluded that citrus peel powders are sources of phytochemicals and can be used for the preparation of PLA-based films for potential applications in food preservation.

Preparation and characterization of a novel tara gum-based antioxidant film with epigallocatechin gallate nanoparticles and its application in blueberry packaging

Preparation and characterization of a novel tara gum-based antioxidant film with epigallocatechin gallate nanoparticles and its application in blueberry packaging

Characterization of polyethylene films drawn by machine direction orientation and consequences on their photooxidation

The effect of uniaxial drawing by Machine Direction Orientation (MDO) on polyethylene films was first studied by complementary analytical methods. XRD and polarized FTIR spectroscopy revealed the transformation of the initial spherulitic structure of PE into microfibrils composed of small crystalline blocks connected by amorphous chains oriented along the drawing direction. No stress-induced crystallization was observed upon MDO processing, but the permeability to oxygen was reduced by 30 % owing to this morphology change. In a second time, the effect of photooxidation on undrawn and MDO-drawn films was studied. There was no difference in the photooxidation kinetics and stoichiometry between them. A slight reorganization of the polymer structure due to physical ageing was observed before any photooxidation, but no change in orientation occurred upon photochemical ageing. Finally, the oxygen permeability of undrawn and MDO-drawn films decreased owing to the changes brought by photooxidation, especially the formation of polar functions within the initially apolar polyethylene and the occurrence of chemicrystallization.

Synthesize and Investigate Structural, Surface Morphology, Optical, and Electrical Characterization of Cu2Se Thin Films by Thermal Evaporation Technique

Synthesize and Investigate Structural, Surface Morphology, Optical, and Electrical Characterization of Cu2Se Thin Films by Thermal Evaporation Technique

Micromechanical Characterization of AlCu Films for MEMS Using Instrumented Indentation Method.

The micromechanical properties (i.e., hardness, elastic modulus, and stress-strain curve) of AlCu films were determined by an instrumented indentation test in this work. For three AlCu films with different thicknesses (i.e., 1 µm, 1.5 µm, and 2 µm), the same critical ratio (hmax/t) of 0.15 and relative indentation depth range of 0.15-0.5 existed, within which the elastic modulus (i.e., 59 GPa) and nanoindentation hardness (i.e., 0.75 GPa, 0.64 GPa and 0.63 GPa for 1 µm, 1.5 µm and 2 µm films) without pile-up and substrate influence can be determined. The yield strength (i.e., 0.754 GPa, 0.549 GPa and 0.471 GPa for 1 µm, 1.5 µm and 2 µm films) and hardening exponent (i.e., 0.073, 0.131 and 0.150 for 1 µm, 1.5 µm and 2 µm films) of Al-(4 wt.%)Cu films for MEMS were successfully reported for the first time using a nanoindentation reverse method. In dimensional analysis, the ideal representative strain εr was determined to be 0.038. The errors of residual depth hr between the simulations and the nanoindentation experiments was less than 5% when the stress-strain curve obtained by the nanoindentation reverse method was used for simulation.

Electrosynthesis and characterization of nanostructured manganese dioxide thin film on stainless steel electrode for electrochemical degradation of phenol

Electrosynthesis and characterization of nanostructured manganese dioxide thin film on stainless steel electrode for electrochemical degradation of phenol

Lanthanum doped hafnium oxide thin films deposited on a lateral high aspect ratio structure using atomic layer deposition: A comparative study of surface composition and uniformity using x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry

Hafnium oxide (HfO2) thin films doped with lanthanum (La) can achieve ferroelectricity, making the material applicable in transistor and memory technologies. To downscale future devices in the semiconductor industry, the application of the doped HfO2 material requires deposition on complex microscopic three-dimensional (3D) structures. A widely used process for the preparation of doped HfO2 thin films is atomic layer deposition (ALD). With 3D geometries, it is challenging to deposit materials homogeneously and to effectively characterize them. To forego the difficulties in film characterization, two-dimensional (2D) PillarHall lateral high aspect ratio (LHAR) test structures are used. These structures expose a lateral surface to facilitate the conformality analysis of thin films deposited using two different ALD processes. In this work, we aim to further advance the arsenal of analysis techniques used to characterize La doped HfO2 thin films by using x-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to analyze uniformity and composition. The XPS technique can be applied and established as a method for the optimal analysis of thin films deposited on LHAR structures. Both techniques provide a complementary analysis of material formation, elemental distribution, measurement along the LHAR depth range, and can probe differences between deposition processes.

Optical and nonlinear characterization of Er-doped SnO2 thin films fabricated by thermal evaporation: potential for advanced optical device applications

Optical and nonlinear characterization of Er-doped SnO2 thin films fabricated by thermal evaporation: potential for advanced optical device applications

Synthesis and sensing characterizations of nanostructured tin-doped Fe2O3 thin films

Synthesis and sensing characterizations of nanostructured tin-doped Fe2O3 thin films

Sol-Gel Spin Coating Synthesis and Characterization of Cadmium Zinc Phosphate Thin Films: Structural, Optical, and Electrical Properties

This study successfully implemented the sol-gel and spin coating technique to grow cadmium zinc phosphate cadmium zinc phosphate (CZP) thin films on a glass substrate and p-Si wafer. Structural and morphological analyses were conducted via X-ray diffraction (XRD) and field-emission scanning electron microscopy (SEM). Additionally, the films’ linear and nonlinear optical properties, encompassing absorbance performance, energy gap, refractive index, dielectric, conductivity, and electronegativity, were systematically studied through UV–vis spectroscopy. XRD analysis uncovers the zinc ions substitution by cadmium ions in zinc phosphate’s unit cell, generating oxygen vacancies crucial for maintaining charge neutrality. SEM images then showcase the intricate and organized nano CZP framework. Shifting to optical studies, CZP film analysis spanning 190–2500 nm reveals an indirect energy band gap of 2.92 eV. Transitioning to electrical characteristics, the CZP/p-Si junction undergoes dark mode I-V-T analysis, elucidating the ideality factor, series resistance, and barrier height.

Synthesis, characterization, and application of films made from highly substituted N-perfluoroacylated chitosan

Highly substituted perfluoroacylated chitosan can alter the physicochemical properties of chitosan; however, the currently synthesized perfluoroacylated chitosan has a low degree of substitution. In this study, we present a simple method for the homogeneous preparation of highly substituted N-perfluoroacylated chitosan, conducted at room temperature without requiring strict anhydrous or oxygen-free conditions. Various perfluorocarbon chains were successfully attached to chitosan through a reaction between perfluorinated acid esters and amines, catalyzed by DBU. The synthesized N-perfluoroacylated chitosan, with high degree of substitution, demonstrated excellent solubility in common organic solvents. Comprehensive characterization was performed using elemental analysis, nuclear magnetic resonance (including two-dimensional NMR), gel permeation chromatography, infrared spectroscopy, X-ray diffraction, and thermal analysis. The resulting films exhibited high water contact angles. Notably, as the fluorocarbon chain length increased, tensile strength gradually decreased, while elongation at break improved. Additionally, water uptake, water vapor transmission rate, and oxygen transmission rate all exhibited a declining trend. The films exhibited good biocompatibility, and in the grape preservation experiment, HFBC treatment effectively delayed grape aging and deterioration while enhancing quality preservation. These results suggest that HFBC film holds promising potential for food packaging applications.

Preparation and characterization of porous corn starch-based antibacterial sustained-release intelligent film

A novel porous corn starch-based antibacterial sustained-release intelligent film was prepared with the porous corn starch as the substrate, purple corn cob anthocyanin (PCA) as the indicator, and tangerine peel essential oil as the antibacterial agent, and its properties were studied. The results showed that the porous corn starch-based antimicrobial sustained-release indicator film had good mechanical strength, surface hydrophobicity and light transmittance. The tensile strength of the sustained-release indicator film (PLSt-12) prepared by porous corn starch with an enzymatic hydrolysis time of 12 h was 14.35 MPa and the elongation at break was 6.55 %. The water contact angle was 89.10°, and the water vapor transmittance was 6.62 × 10−4 g·mm2·s−1·Pa−1. The PLSt-12 was brown at pH 10 and had a sensitive color response. The PLSt-12 reduced the release rate of anthocyanins by 25.01 %, and the sustained-release mechanism was non-Fick diffusion. It showed a significant color change when the pork quality deteriorated, which can be used to monitor the freshness of the pork. This type of antibacterial sustained-release intelligent film had considerable application potential in indicating food freshness.

Characterization of degenerate Zn-doped CdO thin films for optoelectronic devices

Characterization of degenerate Zn-doped CdO thin films for optoelectronic devices

Fabrication and characterization of long-lasting antifungal film containing cinnamaldehyde-loaded complex coacervation microcapsules based on gelatin and gum Arabic

A novel long-acting antifungal active film was successfully created, as an alternative to conventional chemical food preservatives. The antifungal films incorporated with cinnamaldehyde (CA) microcapsules achieved long-lasting antifungal activity, mitigated yellowing caused by the direct addition of CA, and showed improved flexibility properties. CA multinuclear microcapsules were produced using gelatin with a Bloom value of 200 and gum arabic, resulting in increased encapsulation efficiency (99.86 %), good dispersibility and enhanced antifungal ability (inhibition zone diameter of 32 mm). These microcapsules can be incorporated into films as a sustained-release antifungal agent. Compared to unencapsulated CA, the addition of 1 % CA microcapsules reduced the ultraviolet transmittance (<36.40 %) of the film while maintaining visible-light transmittance (36.40 %–65.20 %), and improving its elongation at break (23.49 %). The water vapor permeability of the film was not affected by the inclusion of CA microcapsules below 0.25 %. Moreover, microcapsules can enhance the thermal properties of the film. Antifungal films incorporated with 0.5 %–2 % microcapsules may offer better long-acting inhibition against A. brasiliensis. This study presents a new promising pathway for food storage.