Wave Characteristics Research Articles

Monitoring evolutionary damage of bended concrete beams subjected to freeze-thaw cycling through piezoelectric-enabled wave propagation method

Tunnels in cold regions are often subjected to freeze-thaw cycling, which poses a great challenge to a large number of tunnels in operation or to be built in these regions. Therefore, structural health monitoring (SHM) for lining concrete in cold regions is essential to ensure the safety and long-term operation of tunnels. In this study, the wave propagation method (WPM) is applied for the first time to monitor the cyclic freeze-thaw damage of lining concrete. First of all, the failure behaviors of concrete beams subjected to the coupling effect of flexural loading and freeze-thaw cycling are investigated. Particularly, the authors propose a refined numerical model to simulate the freeze-thaw cycling damage process of concrete beams considering the ice-water phase transition and concrete elastoplastic damage. Based on the numerical results, the internal damage expansion and flexural strength attenuation of concrete beams are revealed. Furthermore, the dynamic attenuation characteristics of stress waves are analyzed by using the wavelet packet decomposition and continuous wavelet transform to reveal. In addition, the WPM-based energy index is proposed to characterize the freeze-thaw damage degree of the lining concrete. A strong correlation is found between the stress wave signal and freeze-thaw damage, with a favorable correlation coefficient of 0.932, suggesting the excellent performance of the WPM in assessing the freeze-thaw damage of lining concrete. This research sufficiently manifests the applicability of the WPM method to monitoring the freeze-thaw damage within cold regional tunnel linings.

Evidence for a survival-driven traveling wave in a keystone boreal predator population

Cyclical population dynamics are a common phenomenon in populations worldwide, yet the spatial organization of these cycles remains poorly understood. In this study, we investigated the spatial form and timing of a population collapse from 2018 to 2022 in Canada lynx (Lynx canadensis) across the northwest boreal forest. We analyzed survival, reproduction, and dispersal data from 143 individual global positioning system (GPS) collared lynx from populations across five study sites spanning interior Alaska to determine whether lynx displayed characteristics of a population wave following a concurrent wave in snowshoe hare (Lepus americanus) abundance. Reproductive rates declined across the study sites; however, site-level reproduction declined first in our easternmost study sites, supporting the idea of a population wave. Despite a clear increase in percent of dispersing lynx, there was no evidence of directional bias in dispersal following a hare population wave. Analysis did show increasingly poor survival for lynx dispersing to the east compared to combined resident and westward dispersal. This pattern is consistent with a survival-mediated population wave in lynx as the driver of the theorized population wave. The combination of these factors supports the idea of a hierarchical response to snowshoe hare population declines with a drop in lynx reproduction followed by increased dispersal, and finally reduced survival. All of this evidence is consistent with the expected characteristics of a population undergoing a traveling wave and supports the hypothesis that lynx presence may facilitate and mirror the underlying wave patterns in snowshoe hare.

Low-frequency bandgap and vibration suppression mechanism of a novel square hierarchical honeycomb metamaterial

AbstractThe suppression of low-frequency vibration and noise has always been an important issue in a wide range of engineering applications. To address this concern, a novel square hierarchical honeycomb metamaterial capable of reducing low-frequency noise has been developed. By combining Bloch’s theorem with the finite element method, the band structure is calculated. Numerical results indicate that this metamaterial can produce multiple low-frequency bandgaps within 500 Hz, with a bandgap ratio exceeding 50%. The first bandgap spans from 169.57 Hz to 216.42 Hz. To reveal the formation mechanism of the bandgap, a vibrational mode analysis is performed. Numerical analysis demonstrates that the bandgap is attributed to the suppression of elastic wave propagation by the vibrations of the structure’s two protruding corners and overall expansion vibrations. Additionally, detailed parametric analyses are conducted to investigate the effect of θ, i.e., the angle between the protruding corner of the structure and the horizontal direction, on the band structures and the total effective bandgap width. It is found that reducing θ is conducive to obtaining lower frequency bandgaps. The propagation characteristics of elastic waves in the structure are explored by the group velocity, phase velocity, and wave propagation direction. Finally, the transmission characteristics of a finite periodic structure are investigated experimentally. The results indicate significant acceleration amplitude attenuation within the bandgap range, confirming the structure’s excellent low-frequency vibration suppression capability.

Brain electrical activity in female Major Depressive Disorder patients

Background: Quantitative EEG provides insight to the brain activity associated with depressive illness. Frontal asymmetry and changes of slow wave frequencies brain activity have been found as the characteristic features of Major Depressive Disorder (MDD). Objective: To assess the brain activity by power spectral analysis of EEG in female patients with MDD. Methods: This observational study was carried on 20 female MDD patients (age 20-40 years) enrolled from the Department of Psychiatry, Bangabandhu Sheikh Mujib Medical University, Shahbag, Dhaka. Twenty (20) healthy volunteers of the same age were considered the control group. For the study, EEG was recorded for 3 minutes in eye closed position by EEG data acquisition device, EEG Traveler BrainTech 32+ CMEEG-01, India. Power spectral analysis of EEG data was done by BT40 analysis software. For statistical analysis, the Mann-Whitney U test was done. Results: Significantly higher Absolute power of delta and theta brain wave, and lower alpha and beta brain wave activity was observed in female MDD patients compared to control in all most all electrodes in all cortical regions. Conclusion: MDD patients showed low excitable brain state and characteristic feature of high slow frequency wave and low fast frequency wave in MDD which can be diagnosed by quantitative EEG analysis. J Bangladesh Soc Physiol 2023;18(2): 53-62

A Review of Microstrip Patch Antenna-Based Passive Sensors.

This paper briefly overviews and discusses the existing techniques using antennas for passive sensing, starting from the antenna operating principle and antenna structural design to different antenna-based sensing mechanisms. The effects of different electrical properties of the material used to design an antenna, such as conductivity, loss tangent, and resistivity, are discussed to illustrate the fundamental sensing mechanisms. Furthermore, the key parameters, such as operating frequency and antenna impedance, along with the factors affecting the sensing performance, are discussed. Overall, passive sensing using an antenna is mainly achieved by altering the reflected wave characteristics in terms of center frequency, return loss, phase, and received/reflected signal strength. The advantages and drawbacks of each technique are also discussed briefly. Given the increasing relevance, millimeter-wave antenna sensors and resonator sensors are also discussed with their applications and recent advancements. This paper primarily focuses on microstrip-based radiating structures and insights for further sensing performance improvement using passive antennas, which are outlined in this study. In addition, suggestions are made for the current scientific and technical challenges, and future directions are discussed.

DISPERSION OF LAMB WAVES IN MULTILAYER STRUCTURES

Low cost, the possibility of online monitoring and high sensitivity distinguish the method of structural monitoring using Lamb waves from other available methods. Structural analysis based on Lamb waves in heterogeneous materials requires fundamental knowledge of the behavior of Lamb waves in such materials. This basic knowledge is critical for signal processing in determining possible damage that can be detected by the propagating wave. Recently, Lamb wave methods have been used to simultaneously survey large areas of composite structures. However, such methods are more complex than traditional ultrasonic testing because Lamb waves have dispersive characteristics, namely, the wave speed varies depending on the frequency, modes and thickness of the plates. Experimentally measured group velocities of Lamb waves in composite materials with anisotropic characteristics do not coincide with theoretical group velocities, which are calculated using the dispersion equation of Lamb waves. This discrepancy arises because in anisotropic materials there is an angle between the direction of the group velocity and the direction of the phase velocity. This work investigates the propagation characteristics of Lamb waves in composites, focusing on group velocity and characteristic wave curves. For symmetric laminates, a robust method is proposed by imposing boundary conditions on the mid-plane and top surface to separate symmetric and antisymmetric wave modes. The dispersive and anisotropic behavior of Lamb waves in two different types of symmetrical laminates is theoretically studied in detail. The dispersion of Lamb waves was studied for 10 symmetric and asymmetric modes. It is shown that only fundamental modes are not characterized by a cutoff frequency, which indicates the interaction of fundamental modes with composite layers in the low-frequency range. A high level of group velocity dispersion was discovered for the SH0 and S0 modes. It is concluded that in isotropic laminates, dispersion is characteristic of symmetric modes. It is shown that the frequency dependence of the group velocity of Lamb waves of laminar composites can be represented in polynomial form.

Active encoding of flexural wave with non-diffractive Talbot effect

In this paper, a flexural Mikaelian lens in thin plate is designed by using conformation transformation. The propagation characteristics of flexural waves in the lens are investigated through rays trajectory equation, simulation analyses, and experimental tests, confirming the self-focusing properties of the Mikaelian lens. Additionally, the study explores the Talbot effect for flexural waves, revealing through simulation studies that the Talbot effect within the Mikaelian lens exhibits nearly diffraction-free properties. Building on the non-diffractive nature of the Talbot effect within the Mikaelian lens, we explore the potential for encoding flexural waves using active interference sources. The simulation and experiment results demonstrate the good performance of the designed active encoding system. This work opens up new avenues for the encoding of flexural waves, presenting promising implications for applications in communication such as structural health monitoring, wireless communication in solid media and data transmission in robotics and other areas related to flexural wave technology.

T-matrix of piezoelectric shunt inclusions on a thin plate

Developing piezoelectric-based plate-like metamaterials necessitates an effective modeling method to elucidate the omnidirectional wave properties of piezoelectric coupled inclusions on a thin plate. The commonly used methods, such as the transfer-matrix method and finite element method, are inadequate for analyzing the transmission and reflection of omnidirectional waves in a two-dimensional elastic medium. Unlike the existing methods, the multiple scattering method employs Bessel functions as the displacement-basis methods which can accurately describe the propagation and scattering characteristics of omnidirectional waves. This paper develops a novel T-matrix formulation to support the multiple scattering method, representing the input-output relationship between incident and reflected waves from a piezoelectric shunt inclusion on a host thin plate. The piezoelectric shunt inclusion comprises a varying-thickness substrate bonded with piezoelectric shunting patches. The T-matrix of the piezoelectric shunt inclusion is formulated by integrating the wave-based method with Rayleigh-Ritz method. The derived T-matrix is then used to semi-analytically analyze the far-field scattering and reflection properties of a single inclusion. Numerical results capture the scattering properties resulting from trapped mode resonances of the piezoelectric shunt inclusion. Additionally, the capability of the piezoelectric shunt damping to design and tune multiple critical coupling conditions for axisymmetric modes of thin plates is parametrically investigated by varying the values of inductors and resistors.

Interaction of second-mode instability and distributed roughness elements in the hypersonic boundary layer over a sharp cone

The ablation of the thermal protection system (TPS) on the aircraft surface generates distributed roughness elements (DRE), which is expected to affect the hypersonic boundary-layer instability seriously. This work presents the experimental investigation of hypersonic boundary-layer instability waves on a 7° half-angle sharp cone with DRE allocated downstream of synchronization point at 0° angle of attack using surface flush-mounted pressure sensors, focused laser differential interferometer (FLDI), infrared thermography and schlieren technique. The experimental results showed that when the DRE (lower than the local boundary-layer height) was located downstream of the synchronization point, the Mack second mode still dominate the boundary-layer instability, and the transition onset was not significantly affected by DRE at various Reynolds numbers. Based on further analysis in the region downstream of roughness, the DRE didn't influence the nonlinear interaction among instability waves materially, although it promoted the growth of instability waves compared with the smooth case. However, the nonlinear interactions were decaying adjacent to the DRE, as the Mack second-mode instability waves cannot penetrate into the separation bubble because of the flow separation induced by the DRE. The FLDI measurement along the wall-normal direction revealed the second-mode instability waves were suppressed close to the wall by the complex roughness surface at the DRE region, and also confirmed the existence of second-mode instability waves at these streamwise locations. The evolution of instability waves followed the linear stability theory (LST), despite the existence of complex wall surfaces. This work enriches the understanding of the effect of DRE on hypersonic boundary-layer transition and demonstrates the spatial characteristics of instability waves above the complex surface.

Electromagnetic field produced by radiation source submerged in non-homogeneous seawater

Electromagnetic (EM) waves are one of the important carriers for information exchange in seawater. The EM parameters of seawater are important factors that affect the performance of EM wave propagation. In the real marine environment, non-constant EM parameters make it impossible to consider seawater as a homogeneous media in the model. However, there are few targeted analyses in the existing studies. In this paper, an N-layered media model was established to investigate the influence of non-constant EM parameters on EM wave propagation in seawater. A direct global matrix method is proposed to solve the EM fields, whose result accuracy does not decrease with the increasing number of layers. The necessity and correctness of the model and methods are verified through numerical simulations and sea experiments. Combined with the existing marine environment database, the propagation characteristics of EM waves in different EM parameter profiles of seawater were analyzed through numerical experiments. The results indicated that the non-homogeneous seawater has a great impact on the intensity, phase, change rate, and spatial distribution of EM waves. Furthermore, the influence is not only reflected in the underwater EM field but also in the air and increases with frequency.

Field trial of a seismoacoustic method for ice cover parameters monitoring on the Franz Josef Land archipelago

Among the physical parameters of the freezing seas ice cover, ice thickness is of key importance, and its measurement is one of the most important tasks. The increased interest in the state of the sea ice cover as an indicator of global climatic changes, as well as the growth of comprehensive development of the Arctic shelf has caused intensive development of technical and methodological bases for ice observations. Despite the great variety of approaches to ice thickness estimation, all of them are not without weaknesses. Thus, most contact methods imply direct human presence, which significantly complicates the procedure, taking into account, among other factors, the rough weather conditions of the Arctic. Remote methods depend on weather conditions and cannot always provide high spatial resolution. In this connection, it is promising to use satellite observations coupled with the results of autonomous “ground” measurements, which can be seismoacoustic data containing information on the characteristics of elastic waves propagating in the ice-covered sea, is promising. The purpose of this work is to experimentally test a new passive method for monitoring ice cover parameters along long profiles based on the analysis of natural seismoacoustic fields. The article analyzes the data of a full-scale seismoacoustic experiment with a multichannel group of geophones placed on the floating ice of Alexandra Island in the Franz Josef Land archipelago within the framework of a complex expedition of the Russian Geographical Society. The demonstrates that it is in principle possible to use flexural-gravity waves propagating in the floating ice to estimate its characteristics, both in the active mode and by analyzing the ambient noise, is demonstrated. The results of ice parameter reconstruction obtained in a nondestructive manner using seismoacoustic waves and averaged over long profiles are compared with the data of direct contact measurements. This can be further used for monitoring seasonal and multiyear variability of sea ice thickness of freezing seas, including shelf zones.

Hirota [formula omitted]-operator forms, multiple soliton waves, and other nonlinear patterns of a 2D generalized Kadomtsev–Petviashvili equation

In the present paper, extensive research is conducted on a 2D generalized Kadomtsev–Petviashvili (2D-gKP) equation which models water waves with long wavelengths. The study starts by establishing Hirota D-operator forms of the governing equation using the Bell polynomial method (BPM). Through checking the three-soliton condition for the 2D-gKP equation, its integrability is then examined, and as a consequence, single-, double-, and (special) triple-soliton waves are derived from the modified Hirota method. In the end, after deriving lump and breather waves of the 2D-gKP equation through ansatz methods, a theoretical discussion along with its proof is presented. Attempts have been made to elucidate the physical features of nonlinear waves by displaying such waves in 2D and 3D postures. The paper’s findings contribute certainly to research on nonlinear waves of KP-type equations.

Aurorally Driven Supersonic Gravity Waves in Saturn's Atmosphere

AbstractSimulations with the Saturn Thermosphere‐Ionosphere General Circulation Model have revealed global‐scale gravity waves in Saturn's upper atmosphere that have not been observed or predicted before. They are forced by diurnally varying zonally non‐uniform distributions of Joule heating and ion drag at the high‐latitude auroral regions in both hemispheres and propagate outward from the source region. The supersonic zonal phase speed imposed by Saturn's rotation and the subsonic meridional phase velocity of about 800 m form a distinct spiral wave structure. They exhibit features of gravity waves: vertical phase progression opposite to the propagation of wave energy and long vertical wavelengths consistent with the dispersion relation for gravity waves. The amplitudes of the perturbations grow with height, reaching 6%–10% for relative temperature variations and up to 350 m for the meridional velocity perturbations. The main effect of these waves is to accelerate the retrograde westerly jets.

Permeability monitoring of underground concrete structures using elastic wave characteristics with modified Biot’s model

This study aims to develop a theoretical model for predicting the permeability of concrete in underground structures using compressive elastic waves. This research is motivated by the necessity of monitoring the permeability of concrete used in critical underground infrastructure, such as tunnels and radioactive waste disposal sites, to ensure their long-term safety. Increased permeability owing to crack generation can lead to groundwater inflow, undermining the structural integrity of these facilities. Traditional methods for permeability monitoring face challenges at depths of 500 m–1 km owing to high temperatures, high pressures, and limited space conditions. To address these issues, Biot’s model, which correlates the P-wave characteristics with the properties of porous media, was applied in this study. The P-wave velocity and attenuation were studied according to the permeability of concrete based on Biot’s model. Subsequently, concrete specimens were prepared to measure the permeability, P-wave velocity, and attenuation. The permeability results from the experiment were compared with those obtained from the model for validation. The findings indicate that the modified Biot’s model can effectively monitor permeability through elastic wave characteristics, offering a non-destructive and reliable method for assessing the condition of concrete structures in underground environments. This approach is expected to enhance the safety of underground infrastructure through accurate permeability monitoring.

Numerical and experimental investigation on the operating characteristics of fan-shaped pulse detonation combustor

The internal flow channel of a turbine engine is typically annular. When circular pulse detonation combustors (PDCs) are installed in this channel, there is a problem with low section utilization rates. To solve this problem, a single-tube fan-shaped PDC test system was developed. The effects of ignition distance on the operating characteristics of the fan-shaped PDC using air and gasoline under different frequencies were studied through both experiment and 3-D numerical simulation. Numerical simulation was also used to investigate the formation and propagation characteristics of detonation waves. The results show that the fan-shaped PDC can operate stably at frequencies ranging from 5 to 25 Hz when the ignition distance is either 2.30 or 2.70 times the equivalent circle diameter from the thrust wall, and it is found to be better to ignite at a distance of 2.30 times the equivalent circle diameter. The blockage ratio of the lower arc surface is larger than that of the other surfaces. This results in more intense collision and reflection. A larger local high pressure area forms near the lower arc surface, which is conducive to the formation of detonation waves. However, the larger blockage ratio makes the flow loss larger, which weakens the intensity of the pressure waves near the lower arc surface. The detonation waves in the fan-shaped PDC travel closer to the upper arc surfaces.

Numerical Simulation of Subaerial Granular Landslide Impulse Waves and Their Behaviour on a Slope Using a Coupled Smoothed Particle Hydrodynamics–Discrete Element Method

Numerical simulations were conducted to investigate the wave features of subaerial granular landslide-generated impulse waves and their impact on slopes. A numerical solution was obtained by coupling smoothed particle hydrodynamics (SPH) and the discrete element method (DEM). Several predictive equations were tested for their applicability in predicting the maximum crest amplitude of impulse waves generated by slides of different shapes. The results indicated that the predictive model developed by Heller and Hager, utilising slide centroid impact velocity, showed favourable prediction accuracy for the maximum crest amplitude, almost independent of the slide shape at impact. Regarding the leading wave, although the wave profile and velocity distribution deviated significantly from a solitary wave of the same wave amplitude, the maximum run-up could be satisfactorily estimated using solitary wave theory. In addition, the increase in the maximum dynamic forces exerted by the impulse waves on the slope followed a power law with the incident wave amplitude.

Kalman tracking and parameter estimation of continuous gravitational waves with a pulsar timing array

Abstract Continuous nanohertz gravitational waves from individual supermassive black hole binaries may be detectable with pulsar timing arrays. A novel search strategy is developed, wherein intrinsic achromatic spin wandering is tracked simultaneously with the modulation induced by a single gravitational wave source in the pulse times of arrival. A two-step inference procedure is applied within a state-space framework, such that the modulation is tracked with a Kalman filter, which then provides a likelihood for nested sampling. The procedure estimates the static parameters in the problem, such as the sky position of the source, without fitting for ensemble-averaged statistics such as the power spectral density of the timing noise, and therefore complements traditional parameter estimation methods. It also returns the Bayes factor relating a model with a single gravitational wave source to one without, complementing traditional detection methods. It is shown via astrophysically representative software injections in Gaussian measurement noise that the procedure distinguishes a gravitational wave from pure noise down to a characteristic wave strain of h0 ≈ 2 × 10−15. Full posterior distributions of model parameters are recovered and tested for accuracy. There is a bias of ≈0.3 rad in the marginalised one-dimensional posterior for the orbital inclination ι, introduced by dropping the so-called ‘pulsar terms’. Smaller biases $\lesssim 10~{{\%}}$ are also observed in other static parameters.

Enhancing NiCrBSi coating by the spatial selectivity of in-situ shock wave assisted laser cladding

The composite energy field laser cladding (LC) can improve the mechanical properties of coatings. Based on the spatial selectivity of laser shock, in-situ shock wave assisted LC (in-situ SWALC) was proposed to fabricate NiCrBSi coatings. Firstly, based on the self-developed in-situ SWALC system, four NiCrBSi coatings were prepared on the 16Mn substrate by changing the centre-to-centre distance (CTCD) of two laser spots. Then, the differences of microstructure and element content between LC coating and in-situ SWALC coatings were analyzed. Vickers hardness tester and wear tester were used to compare the influence of CTCD. Finally, based on the theoretical calculation and propagation characteristics of the shock wave, combined with real-time monitoring of the molten pool during the in-situ SWALC process using high-speed imaging, the strengthening mechanism of the in-situ SWALC coatings was revealed. When the CTCD was 0.9 mm, the NiCrBSi coating had the highest hardness and wear properties, which was attributed to the effects of shock wave on the molten pool flow and solidification process. Therefore, the spatial selectivity of in-situ SWALC will play a important role in improving coating performance and energy efficiency, which contributes to the UN Sustainable Development Goal 9 (UN SDG 9).

Experimental investigation of equilibrium and temporal scour around the round head of the rubble mound breakwater in case of breaking and non-breaking waves

In this study, local sediment movements caused by regular wave effects around the head section of rubble mound breakwater were investigated experimentally. The experiments were performed in a wave channel with a length of 33 m, a width of 3.6 m and a depth of 1.2 m. A plunger-type wave generator was located at the offshore side, generating regular waves of varying heights and periods. Uniform sandbed material of three different grain sizes was used, alongside two distinct breakwater slopes and six different wave characteristics. Experiments were performed under both breaking and non-breaking wave conditions. Time-dependent scour depth and water level measurements were determined by using measuring equipment working with an ultrasonic method. In the paper, new empirical relations were derived for temporal relative scour depths and the non-dimensional time scale parameter and the non-dimensional time scale parameter. The determination coefficient and scatter index of these derived relations were calculated and evaluated statistically. It was observed that the relations are in good agreement with those obtained from experiments. Additionally, the findings indicate that wave breaking significantly reduces the equilibrium scour depth.

FORMATION OF A NEW PARADIGM OF GLOBAL POLITICAL AND MIGRATION PROCESSES UNDER THE INFLUENCE OF MILITARY OPERATIONS IN UKRAINE

The events of February 2022, related to the military aggression of the Russian Federation and a full-scale attack on Ukraine, became the greatest catastrophe of the twenty-first century and the most brutal war on European soil since the Second World War, and is gradually being defined as World War III in terms of its impact on global political and economic relations and the use of military weapons. Although no final assessment has been made (the war is ongoing), the undeniable consequence of Russian aggression has been the violation of the world order built after World War II and the risk of global chaos. One of the most powerful consequences of the war was an unprecedented wave of Ukrainian migration, the lion's share of which was to Europe. And while European countries, faced with an unprecedented influx of refugees, are withstanding the socio-economic burden with dignity, Ukraine has found itself in a demographic catastrophe. The wave of forced migration coincided with long-term demographic problems: a decline in the birth rate, an increase in the number of middle-aged people, and the outflow of population during the war. All these processes will have a steady impact on global migration and political processes. New instruments of state and global regulation of these processes will be required. They will also require the formation of a new paradigm of global economic development. The authors aim to deepen the study of the issue of identifying and assessing the preconditions and consequences of migration processes in the world under the influence of military operations in Ukraine. The paper examines the impact of migration processes on globalisation and economic processes in Europe and the world; the dynamics of the share of labour migrants in the total labour force by income level of destination countries in 2013, 2017, 2020; features of the migration wave of Ukrainians evacuated due to the military aggression of the Russian Federation in 2022; generalised statistical information on the migration processes of Ukrainians during the period of 01.02.2023 – 21.06.2023; detailed statistical data on the number of Ukrainian citizens abroad (as of 01.02.2023), broken down by migrant countries; political and socio-cultural context of the formation of a new paradigm of migration processes. The full implications for Ukrainian migration will be summarised after the war is over, but the following interim conclusions are relevant today. The analysis of migration processes in the world and Europe in the current context suggests that migration is actively taking place and contributes to the development of international integration, as it reduces the number of barriers and increases opportunities. The war in Ukraine will have a significant impact on the economy in terms of the following effects: disruption of global supply chains, increased inflationary pressures, higher energy and raw material prices; food prices will also increase as supplies of wheat and cereals from the Russian Federation and Ukraine are disrupted. and Ukraine have been disrupted; higher energy and commodity prices will cause further inflation, deteriorating economic prospects, reduced confidence and increased financial market risk associated with greater geopolitical tensions; worsening food security in some developing countries in the Middle East and Africa. On the other hand, migration is currently seen as a tool for long-term growth in the EU. The analysis shows that migration provides significant economic benefits, primarily to host countries. Today, the EU is facing a growing shortage of skilled labour due to unfavourable demographic trends in Europe. Given the massive emigration of Ukrainian citizens to the EU, migrants are solving the problem of staff shortages. This is especially true given that Ukrainian emigration provides for adequate social protection and legal support, which guarantees the right to settlement, work and education. The right to employment is readily exercised by Ukrainian migrants, as they are largely people of working age, primarily women. In general, it can be argued that the prospects for regional migration are currently linked to many factors and very uncertain prospects for a return to the pre-2022 or pre-pandemic models of the Eastern Partnership. The war in Ukraine is already escalating into a protracted conflict that will threaten both the economic situation of millions of people and the hopes of temporarily displaced Ukrainians to return home for a long time. As a result, displaced Ukrainians, their host EU countries, and the Ukrainian government will have to deal with the new circumstances, adapting temporary modalities to longer-term solutions.