Ultra-wideband Characteristics Research Articles

Highly compact UWB-MIMO antenna with sharp multi-stop band characteristics

With multi-band rejection characteristics, a new low-profile antenna of size 34 × 34 mm2 is conferred in this article. It consists of quad identical monopole elements (originated orthogonally), contributing ultra-wideband characteristics in the system. The single unit of the proposed design consists of a modified spinning-top shape radiator (MSTSR), excited by a tapered microstrip line feed (TMLF) and semi-circular ground. An excellent bandwidth of 3–12.9 GHz (where S11 < − 10 dB) is obtained at each port. By inserting the structure of four spiral coils, a sharp notch ranging from 7.9 to 8.5 GHz is achieved to filter the X-band satellite communication uplink. In addition, a circular spiral slot in the radiator near the ground plane creates a stop band at 7.35–7.565 GHz band (satellite communication downlink band). Furthermore, symmetrical rectangular trapezoid resonators and inverted symmetrical rectangular trapezoid structures near the feed line are responsible for the elimination of interferences at 5.5 GHz lower WLAN and 3.5 GHz WiMAX respectively. The FR-4 substrate used for the UWB-MIMO design fabrication process and fabricated results are found in good match with the simulated results. Also, the design provides good performance metrics such as total active reflection coefficient, diversity gain, channel capacity loss, isolation, and envelope correlation coefficient.

Ultra-Wideband Vertical Transition in Coplanar Stripline for Ultra-High-Speed Digital Interfaces.

A design method for an ultra-wideband coplanar-stripline-based vertical transition that can be used for ultra-high-speed digital interfaces is proposed. A conventional via structure, based on a differential line (DL), inherently possesses performance limitations (<10 GHz) due to difficulties in maintaining constant line impedance and smooth electric field transformation, in addition to the effects of signal skews, FR4 fiber weave, and unbalanced EM interferences. DL-based digital interfaces may not meet the demands of ultra-high-speed digital data transmission required for the upcoming 6G communications. The use of a coplanar stripline (CPS), a type of planar balanced line (BL), for the vertical transition, along with the ultra-wideband DL-to-CPS transition, mostly removes the inherent and unfavorable issues of the DL and enables ultra-high-speed digital data transmission. The design process of the transition is simplified using the analytical design formulas, derived using the conformal mapping method, of the transition. The characteristic line impedances of the transition are calculated and found to be in close agreement with the results obtained from EM simulations. Utilizing these results, the CPS-based vertical transition, maintaining the characteristic line impedance of 100 Ω, is designed and fabricated. The measured results confirm its ultra-wideband characteristics, with a maximum of 1.6 dB insertion loss and more than 10 dB return loss in the frequency range of DC to 30 GHz. Therefore, the proposed CPS-based vertical transition offers a significantly wider frequency bandwidth, i.e., more than three times that of conventional DL-based via structures.

Fractal Engineering Integration in Antenna Arrays: A Comparative-review for Advanced Transceiver Systems with 5G/IoT Connectivity

The growing demand for space-efficient antennas compatible with portable electronic gadgets inspired the integration of recursively iterated fractal geometries (characterized by self-similarity, space-filling, and multiband/wideband capabilities) in antenna designs. Therefore, this article conducts an extensive survey on fractal-based single-port and multi-port patch antenna designs with multiband and ultrawideband characteristics for their implementation in 5G/IoT (Internet of Things) devices. The survey begins with a basic overview of fractal geometries and the iterated function system (IFS) technique employed for their generation. Further, it highlights the limitation of multipath fading prevalent in single-port antenna arrays that can be overcome by adopting multiple-input multiple-output (MIMO) technology. The MIMO antenna systems are vital for 5G networks to enhance data transmission rate, network capacity, and system reliability. Apart from these admirable attributes, the closely packed antenna elements in the MIMO configuration result in a severe mutual coupling. To address this limitation, various isolation enhancement techniques developed by distinguished researchers are thoroughly discussed in this article, detailing their merits and demerits. At last, this article portrays diverse band-notch structures integrated into the antenna designs to eradicate the existing interfering narrow bands in the ultrawideband (UWB) spectrum. The underlying reason for conducting this survey is to aid antenna designers and academicians with a thorough knowledge of distinct fractal geometries, various isolation improvement approaches, and band-notch techniques on a single platform, desired for designing 5G/IoT-based antenna systems.

A Compact Planar Ultra-Wideband Array Antenna

Ultra-wideband (UWB) antennas have recently gained prominence in communication, radar technology, and electronic warfare domains. The quick development of these antennas is due to the wide bandwidth requirements of pulse radar, ground penetrating radar, electromagnetic compatibility, spaceborne communication systems, stealth target detection, and more. Aiming to address the defects of existing UWB antennas, which often have narrow bandwidth and low gain, a planar ultra-wideband microstrip array antenna was designed to achieve good ultra-wideband characteristics and effectively improve the gain of the antenna. The initial bandwidth of the rectangular monopole antenna was 10 GHz–20 GHz. After loading multiple steps on the monopole patch, the bandwidth was increased to between 10 and 38 GHz. Using the new ultra-wideband array method that combines series feed and angle feed and the defective ground structure (DGS), the array maintains the ultrawide bandwidth span of 10–38 GHz of the array element, and the maximum gain of the antenna in the bandwidth was increased from 5.18 dBi to 9.55 dBi. The challenge of impedance matching of antenna units in ultra-wideband is resolved by the novel array technique, which also increases the antenna’s gain within the bandwidth. The antenna simulation is consistent with the measurement results. With its extensive operating frequency band, high gain, compactness, and favorable radiation attributes, this newly designed antenna holds significant promise for application in UWB radar systems.

Two Elements Orthogonally Placed UWB-MIMO for RADAR, Satellite and Terrestrial Communications

In this paper, a novel approach to design a compact ultrawideband (UWB) Multi-Input-Multi-Output (MIMO) antenna is presented. The proposed design consists of two elliptical monopoles placed orthogonal to each other for mutual coupling reduction. The design is integrated with three parallel coupled line strips for further mutual coupling reduction between the antenna elements. The physical dimension of the proposed design is 35 x 35 x 1.6 mm designed in low cost FR-4 substrate resulting in UWB characteristics in the WLAN range. The proposed design demonstrates good performance in the frequency range of 4.66 GHz to 12.42 GHz having large bandwidth of 7.76 GHz, with a mutual coupling of better than-20 dB in the entire band. The diversity performance, as measured by the correlation coefficient (ECC) and diversity gain (DG), is excellent, and within the acceptable range which proves that the proposed compact UWB MIMO antenna is a suitable candidate for RADAR, Satellite and Terrestrial Communications.

Ultrawideband Strip-Loaded Slotted Circular Patch Antenna Array for Millimeter-Wave Applications

A novel ultra-wideband millimeter wave (mmWave) slotted circular patch antenna and array are proposed in this paper, where each circular patch antenna element is loaded with three pairs of folded strips for enhancing the bandwidth and fed by a substrate integrated waveguide (SIW) through a coupling slot. As a result, a multimode antenna element with the ultra-wideband characteristic can be realized and the impedance fractional bandwidth (FBW) with | <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">S</i> <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> |< -10 dB is up to 66.9%. Furthermore, an 8×8 antenna array prototype is designed and fabricated. Measured impedance FBW with | <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">S</i> <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> |< -10 dB of 56% and measured average radiation efficiency of 73.8% are achieved. With the wideband and low-profile features, this antenna can be a promising candidate for mmWave communications.

A planar UWB-MIMO antenna with high isolation and reconfigurable single band-elimination characteristics

A compact ultra-wideband (UWB) triple mode frequency reconfigurable multiple-input multiple-output (MIMO) antenna with electronically controllable single band elimination properties is presented in this work. The reported antenna comprises of two rotationally symmetric identical modified circular radiators each having tapered microstrip feed lines and separate partial defected ground structures (DGS). The slotted radiating patches consist of C-shaped parasitic strips placed at their centers. Two PIN diode switches were utilized to join and detach the C-shaped strip and slotted circular radiator, and thus total four PIN diodes are employed in the dual-port MIMO configuration to achieve switchable operation between UWB and single band-notched UWB characteristics. The recommended antenna possesses ultrawide bandwidth with Snn ≤ −10 dB except at the rejected bands and attains isolation better than −21 dB in all reconfigurable modes. The proposed MIMO antenna shows good diversity behavior which has been proved through the study of various parameters, such as envelope correlation coefficient (ECC), CCL and diversity gain with values fulfilling the acceptable standard for practical usage. High diversity gain and ECC value below 0.0006 are obtained for all the modes. The suggested antenna structure is ideally suited for ultrawideband MIMO systems with on-demand suppression of WiMAX or WLAN signals.

Design and analysis of metasurface-based CPW-Fed UWB MIMO antenna for wireless communication systems

A compact 4-port coplanar waveguide (CPW) fed ultra-wideband (UWB) multiple-input-multiple-output (MIMO) antenna with enhanced isolation is proposed to operate from 3.66 GHz to 16.61 GHz with 127.78% impedance bandwidth. The proposed antenna system consists of 4 orthogonal arrays of monopole antennas improved by four iterations. The UWB characteristic of the antenna is obtained from an improved monopole antenna fed by CPW. The final MIMO antenna is machined on a Rogers 4003C substrate with dimensions of mm3. The orthogonal arrangement of antennas brings about the polarization diversity and certain isolation of MIMO antennas. Four rows of orthogonal metasurface elements with via holes and the ring of the backplane further improve the isolation between antenna elements in the MIMO system. The MIMO antenna has an impedance bandwidth of 12.95 GHz with dB and good isolation ( dB and dB). In particular, S31 is always less than −25 dB at frequencies greater than 6 GHz. The measured results of MIMO antenna agree with the simulated results. The optimized MIMO antenna has excellent performance in many aspects, such as UWB, compact size, omnidirectional radiation, enhanced isolation and high efficiency, which means that it has application potential in UWB wireless communication systems.

An ultrawideband Koch fractal patch antenna

PurposeCompact and wideband antennas are the need of modern wireless systems that preferably work with compact, low-profile and easy-to-install devices that provide a wider coverage of operating frequencies. The purpose of this paper is to propose a novel compact and ultrawideband (UWB) microstrip patch antenna intended for high frequency wireless applications.Design/methodology/approachA square microstrip patch antenna was initially modeled on finite element method-based electromagnetic simulation tool high frequency structure simulator. It was then loaded with a rectangular slit and Koch snowflake-shaped fractal notches for bandwidth enhancement. The fabricated prototype was tested by using vector network analyzer from Agilent Technologies, N5247A, Santa Clara, California, United States (US).FindingsThe designed Koch fractal patch antenna is highly compact with dimensions of 10 × 10 mm only and possesses UWB characteristics with multiple resonances in the operating band. The −10 dB measured impedance bandwidth was observed to be approximately 13.65 GHz in the frequency range (23.20–36.85 GHz).Originality/valueOwing to its simple and compact structure, positive and substantial gain values, high radiation efficiency and stable radiation patterns throughout the frequency band of interest, the proposed antenna is a suitable candidate for high frequency wireless applications in the K (18–27 GHz) and Ka (26.5–40 GHz) microwave bands.

High Repetition Frequency Subnanosecond Avalanche Marx Generator

Ultrawideband electromagnetic pulses have sub-nanosecond rise time and repetition frequency above 100 kHz. Ultrawideband characteristics make it increasingly used in biomedical, intentional electromagnetic interference, and other fields. Avalanche Marx circuits are an important way to generate high-voltage sub-nanosecond pulses with high repetition rates. However, traditional avalanche Marx circuits (TAMCs) are difficult to achieve a repetition rate of 100 kHz and often fail when they reach kilohertz. The second-stage transistor is extremely vulnerable to damage, which is the principal cause of circuit failure. In this article, through the analysis of its discharge mechanism, it is found that the damage to the second-stage transistor is related to the slow on-speed of the first-stage transistor. In fact, the first-stage transistor is the last to be avalanche broken down, causing the already-opened second-stage transistor to be subjected to enormous electrical stress for an instant. This electrical stress is the passive lift voltage of the second-stage transistor, which is the direct cause of easy damage to the second-stage transistor. Therefore, an improved avalanche Marx circuit (IAMC) is proposed. By connecting a protection resistor in series with the second-stage transistor, the passive lift voltage is suppressed. In order to verify the high refrequency capability of this circuit, a 20-stage pulse generator using an IAMC is developed. It achieves a rise time of 230 ps in a 50- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega $</tex-math> </inline-formula> load, an amplitude of 1.65 kV, and a repetition rate of 100 kHz. After adding the necessary cooling device, it finally achieves a stable output of 230-ps rise time, 730-V amplitude, and 700-kHz repetition rate on a 50- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega $</tex-math> </inline-formula> load.

UWB Circular Fractal Antenna with High Gain for Telecommunication Applications.

The present study proposes a new, highly efficient fractal antenna with ultra-wideband (UWB) characteristics. The proposed patch offers a wide simulated operating band that reaches 8.3 GHz, a simulated gain that varies between 2.47 and 7.73 dB throughout the operating range, and a high simulated efficiency that comes to 98% due to the modifications made to the antenna geometry. The modifications carried out on the antenna are composed of several stages, a circular ring extracted from a circular antenna in which four rings are integrated and, in each ring, four other rings are integrated with a reduction factor of 3/8. To further improve the adaptation of the antenna, a modification of the shape of the ground plane is carried out. In order to test the simulation results, the prototype of the suggested patch was built and tested. The measurement results validate the suggested dual ultra-wideband antenna design approach, which demonstrates good compliance with the simulation. From the measured results, the suggested antenna with a compact volume of 40 × 24.5 × 1.6 mm3 asserts ultra-wideband operation with a measured impedance bandwidth of 7.33 GHz. A high measured efficiency of 92% and a measured gain of 6.52 dB is also achieved. The suggested UWB can effectively cover several wireless applications such as WLAN, WiMAX, and C and X bands.

An inkjet-printed bendable antenna for wearable electronics.

104Flexible antennas, which can conform to the skin and transfer signals to terminals, are particularly useful for wearable electronics. Bending, which frequently occurs to flexible devices, significantly affects the performance of flexible antennas. Inkjet printing has been used as an additive manufacturing technology for fabricating flexible antenna in recent years. However, there is little research on the bending performance of inkjet printing antenna in both simulation and experiment. This paper proposes a bendable coplanar waveguide antenna with a small size of 30 × 30 × 0.05 mm3 by combining the advantages of fractal antenna and serpentine antenna, which realizes the ultra-wideband feature and avoids the problems of large dielectric layer thickness (greater than 1 mm) and large volume of traditional microstrip antenna at the same time. The structure of the antenna was optimized by simulation using the Ansys high-frequency structure simulator, and the antenna was fabricated on a flexible polyimide substrate by inkjet printing. The experimental characterization results show that the central frequency of the antenna is 2.5 GHz, the return loss is -32 dB, and the absolute bandwidth is 850 MHz, which is consistent with the simulation results. The results demonstrate that the antenna has anti-interference capability and can meet the ultra-wideband characteristics. When the traverse and longitudinal bending radius are greater than 30 mm and skin proximity greater than 1 mm, the resonance frequency offsets are mostly within 360 MHz, and return losses of the bendable antenna are within the -14 dB compared with the no bending condition. The results exhibit that the proposed inkjet-printed flexible antenna is bendable and promising for wearable applications.

Generation of optical UWB signals based on combined bright solitons

We investigate the generation of ultra-wide band (UWB) signal in all optical domain based on combined bright solitons by numerical method. The combined solitons with ultra-wideband characteristics can be obtained by multiple bright solitons. The power spectrum can be modulated by pulse interval, pulse width and phase difference of combined bright solitons to satisfy with the Federal Communications Commission (FCC) spectrum mask. Meanwhile, the transmissions of combined bright solitons in single-mode fibers are discussed. The fiber loss and dispersion effects have the influence on the transmissions of combined bright solitons. In order to eliminate dispersion effects, the stable transmission of signals in dispersion decreasing fibers is proposed.

Ultrawideband Shared-Aperture Crossed Tapered Slot Antenna for 5G Applications

A shared aperture scheme based on a tapered slot configuration is proposed in this letter. The main structure of the proposed antenna is an ultrawideband (UWB) crossed tapered slot with ground. In order to improve the practicality, four 1 × 4 dipole arrays containing feeding networks in the millimeter-wave (mm-wave) band are embedded in the four arms of the crossed tapered slot antenna. Four metal reflectors (or flares) are introduced to increase the gain of the dipole array. Owing to the ultrawideband characteristics of the tapered slot antenna, the proposed slot antenna can cover most sub-6 GHz communication frequency bands (such as LTE bands, N77–N79 bands, etc.). The proposed antenna has a compact volume of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$0.5 \lambda \times 0.5 \lambda \times 0.38 \lambda$</tex-math></inline-formula> , where λ is the free-space wavelength at 1.5 GHz. A prototype is designed, fabricated and tested. The measured results show that a −10 dB impedance bandwidth of 107% (1.5–5 GHz) and 15.8% (25–29.3 GHz) is realized in the sub-6 GHz band and mm-wave band, respectively. The isolation between all ports is higher than 30 dB. The gain variation of the antenna in the low-frequency range is 3.8–7.8 dBi. The peak gain of a single dipole array is approximately 14 dBi. The proposed antenna has the characteristics of shared aperture, low cost, and UWB, which is suitable for 5G microbase station applications.

A Frequency Reconfigurable Fractal UWB Antenna Using Ground Stub and PIN

A hexagonal shaped repeated loop structure with reconfigurable ground stub technique is proposed for ultra-wideband (UWB) application. Effects of repeated loops in the fractal structure and position of reconfigurable ground stub are optimized for ultra-wideband characteristics with better performance of the antenna. Two PIN diodes are used in the ground stub to achieve reconfigurability. The proposed fractal antenna is designed with FR4 substrate with an overall dimension of 40×44×1.6 mm3. The design shows frequency reconfiguration from Ultra-wideband characteristics to multiband for different possible switching conditions. The entire design is carried out in CST 2018 environment and the simulated results show that the proposed design is suitable for sub 6GHz wireless LAN, Bluetooth, WiMAX and other wireless applications.

SEMICIRCULAR SLOT BASED UWB MICROSTRIP PATCH ANTENNA FOR VARIABLE BAND NOTCHED APPLICATIONS

The patch antenna with Ultra-Wide Band (UWB) characteristics is a promising candidate for wireless communication. It is a major research problem to mitigate electromagnetic interference (EMI) with narrowband technologies such as 5G lower band, Wi-MAX, WLAN and satellite band, which are all in the UWB region. This study describes a UWB antenna with variable band rejection that can be used to avoid interference with Wi-MAX and 5G lower band applications. The UWB characteristics of a simple rectangle patch antenna with a faulty ground structure has been designed for operational bandwidth (2.7–13) GHz. A novel method semicircular slot (SCS) at the radiation patch creates a band notched from (3.25–3.80) GHz and (3.4–4) GHz. Variable band rejection between (2.95–4.40) GHz can be achieved by adjusting the “Wa” values. When measured over the band rejection frequency, the return loss (S11) and VSWR values are very close to 0 dB and larger than 2. The simulated and measured results such as return loss, VSWR, 2-D polar pattern and gain have almost similar agreement. The design of the suggested antenna is simple, compact and efficient for Wi-MAX application, this is an ideal UWB antenna with the band notch characteristics.

Identification and Compensation for D-Dot Measurement System in Transient Electromagnetic Pulse Measurement.

The measurement of the transient pulsed electromagnetic (EM) field is essential for analyzing electromagnetic compatibility. Due to their good performance, D-dot sensors, combined with numerical integration computation for signal recovery, are commonly used to measure electromagnetic pulses (EMPs). However, the integration approach is occasionally flawed due to a non-ideal frequency response or noise, causing distortions in the reconstructed signal. In order to better understand the dynamic performance of the sensor, a nonlinear Hammerstein model is employed in the system identification for the sensor with the calibration data collected in the laboratory environment. When identifying the linear component based on the ultra-wideband characteristics of the measured transient pulse, a two-step identification approach with two different pulse excitation modes, low frequency and high frequency, is utilized to conduct the modeling across the entire frequency range. Based on the reliable identification and modeling of the D-dot sensor, a compensation system that corresponds to the nonlinear Hammerstein model has been developed for the practical signal recovery of the incident E-field. After compensation, the dynamic characteristics of the sensor are significantly improved, and the system compensation approach outperforms the integration method in signal recovery for the incident E-field.

Dual-Band Orthogonally-Polarized Dual-Beam Reflect-Transmit-Array With a Linearly Polarized Feeder

This communication presents a novel bifunctional metasurface (MS) combining the reflectarray (RA) and transmitarray (TA) with dual-band orthogonally polarized dual-beam characteristics. The proposed reflect-transmit-array (RTA) is capable of reflecting the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$x$ </tex-math></inline-formula> -polarized incidence without changing its polarization state around 10 GHz while transmitting the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$y$ </tex-math></inline-formula> -polarized incidence and converting it into the circularly polarized (CP) waves around 14 GHz. To completely cover the working frequency bands of both modes, an antipodal Vivaldi antenna (AVA) is introduced as the source feed due to its intrinsic ultrawideband characteristics. As a proof of concept demonstration, a prototype consisting of 20 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times20$ </tex-math></inline-formula> elements is also designed, fabricated, and measured. We observe a good agreement between the measurement and simulation results that shows a peak gain of 26.2 dBi and 27.3 dBic, 1 dB gain bandwidth (BW) of 9.8–11.3 GHz (14.2%) and 12.8–14.2 GHz (10.4%), and peak aperture efficiency (AE) of 48.7% and 35.1% for the reflection and transmission modes, respectively.

HRP UWB 채널임펄스응답의 측정 및 분석

Ultrawideband (UWB) wireless communication technology, which appeared 20 years ago, is becoming popular in various fields because the ability to measure the precise distance between UWB devices beyond wireless communication is being re-examined. The currently commercialized UWB technology is high-rate pulse repetition frequency (HRP) UWB technology, which uses high-speed UWB pulses of several tens of megahertz, and precise distance and direction measurements are made by using the characteristic changes of the channel impulse responses (CIRs). Therefore, to understand HRP UWB technology, it is necessary to understand the CIR characteristics first. However, because HRP UWB technology is commercially successful, the disclosure of the technology has been insufficient, so the understanding of the meaning of the CIR of HRP UWB technology is inadequate. Therefore, in this study, the CIR characteristics of HRP UWB integrated circuits are explained, and the CIR was measured in various environments using a DWM3000 HRP UWB module (Qorvo). These results are expected to be helpful in understanding UWB technology and applying it to various fields.

DESIGN AND REALIZATION OF WEARABLE ULTRAWIDEBAND ANTENNA TRIANGULAR PATCH FOR HEALTH APPLICATIONS WITH DEFECTED GROUND STRUCTURE METHODS

Wearable antenna is currently a very popular topic because it has the advantages of small size, light weight, and flexible shape. Because of their versatility, wearable antennas are often used in healthcare, as well as military applications. In this research, a wearable triangular patch antenna is designed at the Industrial, Scientific, Medical (ISM Band) 2.4 GHz frequency using Cordura Delinova 2000 textile as a substrate and copper tape as a conductor for the patch and ground plane. To obtain ultra-wideband characteristics, the Defected Ground Structure technique is used. From the simulation results carried out under normal conditions, a bandwidth of 1403.9 MHz is obtained with a VSWR value of 1.004 and a gain of 2.355 dBi. By adding a phantom with hand characteristics, the simulation results show a bandwidth of 1354.1 MHz, VSWR 1.36, Gain 7.35 dBi, and SAR 0.4 W/Kg at a distance of 30 mm from the phantom. From the measurements made under normal conditions, a bandwidth of 684.3 MHz, a VSWR of 1.1045 and a gain of 2.01 dBi are obtained. From the on-body measurement using wrist, the antenna obtains a bandwidth of 615.2 MHz and VSWR of 1.4027, at a distance of 30 mm from the phantom. Based on the parameters obtained in the measurement and simulation, the antenna can be used in the 2.4 GHz frequency.