Discharge Characteristics Research Articles

Effect of dielectric material on the uniformity of nanosecond pulsed dielectric barrier discharge

Dielectric barrier discharge (DBD) is considered as a promising technique to produce large volume uniform plasma at atmospheric pressure, and the dielectric barrier layer between the electrodes plays a key role in the DBD processes and enhancing discharge uniformity. In this work, the uniformity and discharge characteristics of the nanosecond (ns) pulsed DBD with dielectric barrier layers made of alumina, quartz glass, polycarbonate (PC), and polypropylene (PP) are investigated via discharge image observation, voltage-current waveform measurement and optical emission spectral diagnosis. Through analyzing discharge image by gray value standard deviation method, the discharge uniformity is quantitatively calculated. The effects of the space electric field intensity, the electron density (N e), and the space reactive species on the uniformity are studied with quantifying the gap voltage U g and the discharge current I g, analyzing the recorded optical emission spectra, and simulating the temporal distribution of N e with a one-dimensional fluid model. It is found that as the relative permittivity of the dielectric materials increases, the space electric field intensity is enhanced, which results in a higher N e and electron temperature (T e). Therefore, an appropriate value of space electric field intensity can promote electron avalanches, resulting in uniform and stable plasma by the merging of electron avalanches. However, an excessive value of space electric field intensity leads to the aggregation of space charges and the distortion of the space electric field, which reduce the discharge uniformity. The surface roughness and the surface charge decay are measured to explain the influences of the surface properties and the second electron emission on the discharge uniformity. The results in this work give a comprehensive understanding of the effect of the dielectric materials on the DBD uniformity, and contribute to the selection of dielectric materials for DBD reactor and the realization of atmospheric pressure uniform, stable, and reactive plasma sources.

Study on the treatment of oil production wastewater by corona discharge coupling Fenton reagent

As the main by-product of oil production, oil production wastewater has the characteristics of high organic content and poor biodegradability, which makes the low temperature plasma wastewater treatment technology get new development. The Ground electrode atomization negative corona discharge（GEANCD） technology increases the discharge current on the basis of traditional corona discharge, but the uneven atomization of liquid is a key challenge at present, which will have a great impact on the degradation of wastewater pollutants. In this study, the GEANCD reactor was redesigned and a self-developed spiral wire hole electrode (SWHE) was used to replace the conventional wire electrode (WE). The discharge characteristics of the reactor under the two electrode structures were investigated and the optimal discharge parameters were determined. Under the optimum discharge parameters, the treatment effect of the two electrode structures with or without coupling Fenton reagent on oil production wastewater was also compared. The experimental results show that under the optimal discharge parameters of flow rate of 25 mL/min, plate electrode distance of 50 mm and discharge voltage of 14 kV, the reactor equipped with SWHE has higher discharge current, and the treatment effect of oil production wastewater is better when coupled with Fenton reagent.

Effect of power supply parameters on discharge characteristics and sterilization efficiency of magnetically driven rotating gliding arc

Plasma sterilization is a new generation of high-tech sterilization method that is fast, safe, and pollution free. It is widely used in medical, food, and environmental protection fields. Home air sterilization is an emerging field of plasma application, which puts higher requirements on the miniaturization, operational stability, and operating cost of plasma device. In this study, a novel magnetically driven rotating gliding arc (MDRGA) discharge device was used to sterilize Lactobacillus fermentation. Compared with the traditional gas-driven gliding arc, this device has a simple structure and a more stable gliding arc. Simulation using COMSOL Multiphysics showed that adding permanent magnets can form a stable magnetic field, which is conducive to the formation of gliding arcs. Experiments on the discharge performance, ozone concentration, and sterilization effect were conducted using different power supply parameters. The results revealed that the MDRGA process can be divided into three stages: starting, gliding, and extinguishing. Appropriate voltage was the key factor for stable arc gliding, and both high and low voltages were not conducive to stable arc gliding and ozone production. In this experimental setup, the sterilization effect was the best at 6.6 kV. A high modulation duty ratio was beneficial for achieving stable arc gliding. However, when the duty ratio exceeded a certain value, the improvement in the sterilization effect was slow. Therefore, considering the sterilization effect and energy factors comprehensively, we chose 80% as the optimal modulation duty ratio for this experimental device.

Surface degradation of epoxy resin exposed to corona discharge under bipolar square wave field: From phenomenon to the insights

The unavoidable corona discharge induced by distorted field is detrimental to the safety of power equipment, especially the equipment with high voltage magnitude and high frequency. In this paper, the degradation morphology, residual components, lifetime of endurance, partial discharge characteristics, and evolution of surface traps of epoxy insulation under bipolar square wave field is investigated. The results show that degraded zone exhibits as three layers with round pits and channel-like ravines on the surface of epoxy resin exposed to corona discharge. It is demonstrated that more oxygen element during corona discharge while more carbon element during breakdown appeared, and nano-Al2O3 fillers migrates to the discharged zone. The maximum temperature and number of emitted phonons increase with voltage amplitude and frequency in power law and exponential form, respectively, corresponding to the fitting function of endurance lifetime. The emitted light is concentrated on the near ultraviolet (UV) and infrared ray (IR) band, indicating the energy pooling and thermal effect of corona discharge, which interprets the distinct degradation behavior of samples under sinusoidal and bipolar square wave voltage. The effect of space charge and thermal conductivity should be considered simultaneously in the degradation of epoxy insulation under bipolar square wave field due to polarity reversal and high frequency, which is proved by the disparate behavior of EP/nano-Al2O3 composites resistance to corona discharge and the breakdown moment at falling edge of bipolar square wave voltage. This work may contribute to the advancement of resistance to corona discharge degradation in equipment with high power density, high voltage amplitude and high frequency.

Identification of illicit discharges in sewer networks by an SWMM-Bayesian coupled approach.

Illicit discharges into sewer systems are a widespread concern within China's urban drainage management. They can result in unforeseen environmental contamination and deterioration in the performance of wastewater treatment plants. Consequently, pinpointing the origin of unauthorized discharges in the sewer network is crucial. This study aims to evaluate an integrative method that employs numerical modeling and statistical analysis to determine the locations and characteristics of illicit discharges. The Storm Water Management Model (SWMM) was employed to track water quality variations within the sewer network and examine the concentration profiles of exogenous pollutants under a range of scenarios. The identification technique employed Bayesian inference fused with the Markov chain Monte Carlo sampling method, enabling the estimation of probability distributions for the position of the suspected source, the discharge magnitude, and the commencement of the event. Specifically, the cases involving continuous release and multiple sources were examined. For single-point source identification, where all three parameters are unknown, concentration profiles from two monitoring sites in the path of pollutant transport and dispersion are necessary and sufficient to characterize the pollution source. For the identification of multiple sources, the proposed SWMM-Bayesian strategy with improved sampling is applied, which significantly improves the accuracy.

Investigation on the Regulation of the Combustion Characteristics of a Propane/Air Mixture by Repetitive nSDBD Pretreatment.

This paper investigates the effect of the transient repetitive nanosecond surface dielectric barrier discharge (nSDBD) pretreatment on the combustion characteristics of combustible mixtures. A method of using nSDBD online pretreatment of a combustible mixture to regulate the combustion characteristics of the mixture is proposed. The study is conducted in a constant-volume combustion chamber at atmospheric pressure and temperature using a propane/air mixture as fuel. The discharge characteristics of repetitive nSDBD and the effects of pretreatment discharge energy and interval time between the pretreatment and ignition on combustion rate are discussed. The results show that (1) For 12.5 kHz pulses, the filament length generated with the annular dielectric barrier electrode discharge can reach up to 7 mm, and the number of discharge filaments per pulse can reach 40. (2) Pretreating mixtures using repetitive nSDBD at millisecond time scale can significantly improve the combustion process. (3) Repetitive nSDBD pretreatment can enhance the activity of the mixture near the surface of nSDBD electrode, which leads to obvious wrinkles on the flame surface and significantly improves the combustion rate. (4) The flame rise time decreases with the increase of discharge energy and increases with the increase of the interval time between the pretreatment and ignition. The effect of the repetitive nSDBD pretreatment on flame propagation during the flame development period becomes more pronounced with the increase of the excess air coefficient. The research results of the paper reveal the law of online regulation of combustion characteristics of combustible mixtures by the nSDBD, providing experimental data support for the mechanism research of online regulation of combustion characteristics of combustible mixtures by the nSDBD.

Study on the application of atomized corona discharge combined with screen electrode in dust collection

This paper presents the design of a novel atomized corona discharge coupled screen electrode dust collector, which integrates electrostatic capture and wet electrostatic dust removal technologies. The upper part of the dust collector features an atomized corona discharge electrode utilizing a threaded-wire hole design with uniform water distribution. This design effectively addresses the issue of electrode fatness that may arise from uneven distribution of the discharge electrode. In contrast, the lower part of the collector is equipped with four side-by-side silk screen electrodes, which serve to expand the dust collection area, facilitate secondary particle capture, and consequently enhance dust removal efficiency. The study delves into a detailed analysis of the impact of various parameters on discharge characteristics and dust removal efficiency, culminating in the identification of optimal parameters.

Methods for calculating the moisture discharge characteristics of insulators

This paper presents a detailed analysis and comparison of methods for calculating the moisture discharge voltage of insulators. The initial section provides a brief overview of the principles underlying air discharge along the surface of insulators, which is crucial for understanding moisture discharge processes. Two primary calculation methods for moisture discharge voltage are considered. The first method is based on Tepler's formula, which requires specific input data that can only be obtained experimentally. Although this approach is classical, it complicates practical application due to the difficulty of acquiring the necessary parameters under real-world conditions. The second method, described in the literature, relies on readily available data, significantly simplifying the calculation process. Based on this method, an automated tool for calculating the moisture discharge characteristics of insulators has been developed. The use of this tool reduces dependency on experimental data, providing accurate results with minimal time and resource expenditure. To demonstrate the effectiveness of the proposed tool, a moisture discharge characteristic calculation was performed for the insulator type LK 70-110. According to the analysis results, the moisture discharge voltage for this insulator is 549 kV, with a stress of 2.1 kV per centimeter of leakage current path length. These figures align with the average values obtained using the first method, confirming the reliability and accuracy of the new approach. The conclusions indicate that the second calculation method is fully satisfactory for standard insulator calculations. It can also be applied in specific conditions, such as under-chemo-substations, where precision and efficiency are critically important. Thus, the proposed calculation method can become an effective tool for engineers and researchers involved in the design and analysis of insulation systems. This work significantly contributes to the development and improvement of methods for assessing the moisture discharge characteristics of insulators, representing an essential step towards enhancing the reliability and safety of electrical networks and their operation.

Effect of electrohydrodynamic (EHD) drying on active ingredients, textural properties and moisture distribution of yam (Dioscorea opposita)

This paper systematically investigates the changes in material properties during electrohydrodynamic (EHD) drying, the discharge characteristics of the EHD system as well as the active ingredients, textural properties (hardness, adhesiveness, etc.) and moisture distribution of yam under EHD, air drying and hot air drying were investigated. The results showed that the active particles and the ionized wind generated during the discharge process of the electrohydrodynamic drying device had a significant effect on the drying. Compared to thermal drying, 21 kV drying resulted in the most complete cellular structure, the best internal bound water content as well as textural properties of yam. It played a positive role in the retention of internal nutrients in yam, and the total phenol and allantoin contents were increased by 25.74% and 81.99%, respectively. These results elucidate the advantages of electrohydrodynamic drying in yam drying and provide a reference for the application of EHD in drying.

Analysis of gap distance of ultra high voltage AC transmission lines in areas with altitude above 2000m

Abstract Research on long-wave front discharge characteristics of lines and long gaps of substation equipment in high-altitude areas needs to be conducted in a systematic manner immediately in order to guarantee the safety and economy of high-altitude UHV lines with respect to external insulation. However, at present, the gap discharge test of transmission lines is mainly carried out in areas below 2000m above sea level. The actual test is challenging to conduct in the high altitude region, and the test data is incomplete. To further confirm the validity of extrapolation of existing altitude test data to high altitude areas, this paper conducts theoretical analysis based on the real test data under standard meteorological conditions provided by GB/T 24842 standard. The altitude correction methods in IEC 60071-2: 2018 and IEC 60060-1: 2010, the m-coefficient method and g-parameter method, are used to correct the lightning impulse, power frequency, and standard switching impulse of AC transmission line gaps. The discharge voltage in areas below 5000m above 2000m is obtained, and several significant discharge characteristic parameters are obtained. Based on the 50% discharge voltage requirements of various voltage types of 1000kV transmission lines, combined with the discharge voltage curves at multiple altitudes, the minimum air gap distance of transmission lines at the altitude of 2000m-5000m is obtained. The comparative analysis of the correction results of the two methods provides a way of thinking for the next step to carry out the true test of UHV AC transmission line gap discharge in higher elevation regions.

Research on Partial Discharge Characteristics of Suspension Defect in GIS under the Action of Voltage and Current

Abstract Gas insulated switchgear (GIS) is a critical component in power system, and the insulation testing is crucial before putting it into operation. Despite passing AC withstand tests, some GIS equipment exhibit insulation faults during operation. Existing AC withstand tests fall short in detecting all insulation faults in GIS equipment. To address this issue, a proposal is made to conduct a comprehensive simulation of actual GIS equipment operating conditions through a combined voltage and current boost test, aiming to address the limitations of existing tests. This study, based on a 330kV GIS test platform, compares the partial discharge characteristics of suspension defects under traditional voltage-boosting mode and the combined voltage and current boost mode. The research investigates the influence of simultaneously applying voltage and current on discharge characteristics. It is observed that the voltage and current boost combined mode significantly increase the partial discharge inception voltage (PDIV) and the corresponding apparent discharge compared to other modes. The apparent discharge quantity after a certain period of current flow during the discharge development process is greater than that observed in other modes. The current notably enhances the ultrasonic amplitude of partial discharge. These findings establish an experimental foundation for conducting voltage and current combined boost tests in the field.

Discharge mode and particle transport in radio frequency capacitively coupled Ar/O2 plasma discharges

Abstract Simulations are conducted on capacitively coupled Ar/O2 mixed gas discharges employing a one-dimensional fluid coupled with an electron Monte Carlo (MC) model. The research explores the impact of different O2 ratio and pressures on the discharge characteristics of Ar/O2 plasma. At a fixed Ar/O2 gas ratio, with the increasing pressure, higher ion densities, as well as a slight increase in electron density in the bulk region can be observed. The discharge remains dominated by the drift–ambipolar (DA) mode, and the flux of O(3P) at the electrode increases with the increasing pressure due to higher background gas density, while the fluxes of O(1D) and Ar* decrease due to the pronounced loss rate. With the increasing proportion of O2, a change in the dominant discharge mode from α mode to DA mode can be detected, and the O2-associated charged particle densities are significantly increased. However, Ar+ density shows a trend of increasing and then decreasing, while for neutral fluxes at the electrode, Ar* flux decreases, and O(3P) flux increases with the reduced Ar gas proportion, while trends in O(1D) flux show slight differences. The evolution of the densities of the charged particle and the neutral fluxes under different discharge parameters are discussed in detail using the ionization characteristics as well as the transport properties. Hopefully, more comprehensive understanding of Ar/O2 discharge characteristics in this work will provide a valuable reference for the industry.

Transformer Fault Diagnosis Based on Intelligent Algorithm and Partial Discharge

Abstract As an important part of power transmission and transformation equipment and power systems, transformers’ operating conditions will have a direct impact on the stability and reliability of the power system. In view of the problems of high diagnosis cost and low accuracy of diagnosis results in existing fault diagnosis technology, this paper uses the pulse current method to detect the pulse signal generated by the discharge model based on the partial discharge experimental platform data, analyzes and studies the discharge characteristics of different discharge defects, and draws For the partial discharge phase distribution (PRPD) spectrum of each defect type, the statistical characteristic parameters characterizing the characteristics of the spectrum were extracted. The partial discharge statistical characteristics were used as classification feature quantities and input into three network models: RBF, GRNN, and PSO-GRNN. The results show that PSO-GRNN has a good recognition effect and is suitable for partial discharge type identification. It has important practical significance and application value for the all-round health management of power transformers.

Research on discharge characteristics of synthetic ester-paper insulation under power frequency and low frequency

Abstract Synthetic ester insulating oil transformer has broad application prospects in offshore wind power low-frequency power transmission. This paper carried out discharge tests on synthetic ester-paper insulated used sharp plate electrodes at a power frequency of 50 Hz and a low frequency of 17 Hz based on the pulse current method. The research results show that some basic characteristics do not change under 50 Hz and 17 Hz, that is, the discharge is distributed near the voltage peak in a peak shape. The main differences are that the positive peak characteristics at 17 Hz tend to be blurred; the positive maximum discharge amount, and discharge times show an overall downward trend; the phase-resolved partial discharge pattern (PRPD) and the statistical map (n-φ, n-q) have the same overall shape, but different distribution ranges. The test results can be used as a reference for partial discharge pattern identification and insulation design in synthetic ester low-frequency transformers.

Experimental study on the discharge characteristics of an air rotating gliding arc

In this study, the discharge characteristics of an air rotating gliding arc (RGA) are investigated by synchronous measurements of a digital oscilloscope and a high-speed camera, and the emission spectrum measurement. The discharge evolution in one complete motion cycle exhibits a ‘breakdown-elongation-extinction’ process accompanied by a jump phenomenon of the arc root and a back-breakdown phenomenon. The discharge evolves from the unstable breakdown mode (U-B), to the transition mode and finally to the stable gliding mode (S-G) by increasing the input voltage or decreasing the tangential and axial gas flow rates. The U-B mode at an input voltage of 120 V is featured by the large reduced electric field and high electron temperature of 1.90 eV, but the arc length and existence time are very short. The S-G mode at an input voltage of 270 V has a relatively low breakdown frequency of 0.33 kHz and an average breakdown current of 1.31 A, implying that the arc steadily glides and rotates along the spiral electrode. The average electron temperature is 0.64 eV in the S-G mode, while the arc length and existence time are longer. The rotational and vibrational temperatures of the N2(C3∏u) state are respectively measured at 2200 K and 4400 K in the U-B mode, and in the S-G mode are 2600 K and 4820 K. From the evolution of emission intensities of measured excited species, it is found that the NOγ band emission intensity generally rises from the U-B mode to the S-G mode since the gas temperature and arc existence time rise, indicating that the S-G mode may be beneficial for the vibrationally promoted Zeldovich reactions. This study could deepen the understanding of arc characteristics in air RGA for selecting a suitable mode to achieve better plasma performance in practical applications.

Effects of wire size on electrical and shock-wave characteristics in underwater electrical explosions of aluminum wires

Initial wire resistance is an important parameter in an underwater electrical wire explosion because it directly affects the discharge characteristics of the circuit and indirectly affects the explosion and shock-wave generation. This paper presents a study on how the initial resistance affects electrical and shock-wave characteristics of underwater electrical explosions of aluminum wires with an initial energy storage of ∼53.5 kJ under the optimal mode. Load voltage, circuit current, and shock-wave pressure were recorded and analyzed. The experimental results show that the average of the discharge channel resistance and the total energy deposition all increase with the initial resistance. In addition, there is no simple functional relationship between the energy deposition during the phase transition process and the initial resistance, while the energy deposition during the plasma growth process increases with the initial resistance. As for shock waves at ∼33 cm, it is observed that when the initial resistance increases from 674.82 to 1581.60 μΩ, the peak pressure, energy density, and impulse increase from 12.65 MPa, 2.67 kJ/m2, and 964.51 Pa s to 42.37 MPa, 18.21 kJ/m2, and 1940.42 Pa s, respectively. In other words, for the optimal mode, an underwater electrical explosion with thinner and longer wire is more conducive to generating strong shock waves in the far-field regime. These results should help select loads for underwater electrical wire explosions in engineering applications.

Mxene-based capacitive enzyme-free biofuel cell Self-Powered sensor for lead ion detection in human plasma

In response to the health risks posed by heavy metal lead, we have developed a self-powered sensor specifically designed for detection of lead ions in this work. This sensor is designed based on an enzyme-free biofuel cell as a self-powered source. The biofuel cell utilizes two-dimensional lamellar Au NPs-Ti3C2Tx heterostructures as the capacitive anode substrate material. The Ti3C2Tx MXene with the excellent charge storage capacity and fast discharge characteristics, provides a large instantaneous current for signal amplification. Furthermore, the DNA walker technique was combined to regulate the loading of ultra-small Au NPs exhibiting glucose oxidase-like properties. Meanwhile, Co, Mn nitrogen-doped carbon-based nanosheets were designed as the cathode with outstanding oxygen reduction reaction catalytic activity. As a result, the constructed enzyme-free biofuel cell has been used to detect Pb2+ with a wide linear range (0.01–7500 nM) and a low detection limit (0.43 pM). It has been successfully applied to the determination of Pb2+ in human plasma, achieving excellent recovery rates (94.0–110.5 %). The developed capacitive anodes not only significantly optimized the performance of the biofuel cell self-powered sensors, but also provided important insights for the future design and construction of biofuel cells.

Soil freeze/thaw dynamics strongly influences runoff regime in a Tibetan permafrost watershed: Insights from a process-based model

The Tibetan Plateau (TP) is a region rich in extensive frozen ground and the source of many major Asian rivers. However, how soil freeze/thaw (F/T) dynamics influence runoff production at the catchment scale in the TP is poorly understood. This study employs a process-based permafrost hydrology model with a new soil parameterization to investigate soil F/T dynamics and their impact on runoff in a TP permafrost watershed, i.e., the source region of Yangtze River (SRYR). The revised model separates soil evaporation and plant transpiration, and accounts for the influence of soil gravel and organic carbon content, as well as variation in saturated hydraulic conductivity along the soil profile. Validation results demonstrate that the revised model accurately simulates daily soil temperature (mean RMSE of 1.3 °C), soil moisture (mean ubRMSE of 0.05 cm3 cm−3), and runoff discharge (NSE = 0.82). The results reveal different altitudinal patterns of warming trend between permafrost and seasonally frozen ground (SFG). Warming rates in SFG area increase monotonously with elevation, while a turning point is observed in permafrost region around 4800 m. With active layer deepening, deep-soil water content increases but primarily replenishes soil water storage rather than directly contributing to runoff recharge, while rootzone and the middle part of the active layer become drier. Soil F/T cycles in the permafrost region exert stronger influences on runoff process compared to SFG. Delayed soil thaw onset generally results in higher spring runoff coefficient, while delayed soil freeze onset is related to slower runoff recession. The freezing zero-curtain period is likely to impact the continuity of runoff recession processes by affecting the connectivity of groundwater flow channels. These findings uncover the regulatory mechanisms of soil F/T dynamics on runoff production and river discharge characteristics, providing a fundamental basis for predicting permafrost hydrology responses to future climate change in the TP.

Hints to lightning breakdown enhancement for synthetic ester insulating oil: Unraveling the impact of molecular chain length on electron structural parameters under electric field stress

The high flash point and biodegradability of synthetic ester insulating oil offer transformers both operational stability and environmental protection. However, its poor lightning breakdown characteristics under long oil gaps and inhomogeneous electric field often lead to rapid streamer discharges, posing challenges and limits to the use of synthetic ester insulating oil and hinders the development of low-carbon, eco-friendly high voltage power transformers. To address this issue, we propose improving the lightning breakdown characteristics through molecular chain length design. Using density functional theory, time-dependent density functional theory, and wave function analysis, we investigate how microscopic factors like molecular polarity, discharge active sites, frontier orbitals, traps, ionization and electron affinity, and excitation processes influence macroscopic discharge characteristics. Our findings show that under an electric field, chain length is positively correlated with electron transfer, enhancing charge polarization. Chain length also correlates positively with dipole moment, facilitating the formation of space charge centers. While chain length minimally affects discharge active sites, the electric field can intensify their formation. Additionally, a longer chain length decreases the energy gap, increasing electron trap levels more than hole trap levels, thus capturing charges longer. Chain length is negatively correlated with ionization energy, promoting electron impact ionization, and has little effect on the excitation energy of S(0) → S(1), making excitation under high electric fields unlikely.

Relationship between progressive improvement in gait ability one year after discharge and skeletal muscle characteristics of stroke survivors

BackgroundThe clinical importance of skeletal muscle characteristics for improving gait ability of stroke survivors is increasing. We aimed to examine the association between muscle quantity and quality at discharge and changes in gait independence at the time of 1 year after discharge in patients with stroke. MethodsThis prospective observational study included 100 patients with stroke who were admitted to a convalescent rehabilitation ward. We defined muscle quantity and quality operationally as muscle thickness and echo intensity observed in ultrasonography images, respectively, and measured quadriceps muscle on the paretic and non-paretic sides at the time of discharge. The outcome measured in our study was changes in gait independence 1 year after discharge, as assessed by the Functional Independence Measure gait assessment tool score. ResultsAmong the study participants, 23 (23.0 %) were assessed to have reduced gait independence, while 77 (77.0 %) were evaluated to have improved or maintained gait independence. Our multivariate logistic regression analysis revealed that only muscle quantity on the paretic side was significantly associated with an improvement or maintenance of gait independence (odds ratios 3.32; 95 % confidence interval 1.01–10.95; p = 0.049). ConclusionsOur findings revealed that an improvement in gait independence 1 year after discharge was influenced by quadriceps muscle quantity on the paretic side at the time of discharge in patients with subacute stroke. This finding highlights the importance of lower limb muscle quantity on the paretic side as a clinically significant factor that influences the improvement in gait ability after hospital discharge.