Channel Estimation Process Research Articles

Review on Preamble-Based Channel Estimation Method for FBMC/OQAM Toward 6G: Advantages, Challenges and Future Works

Filter bank multicarrier/offset quadrature amplitude modulation (FBMC/OQAM) is a multicarrier modulation that is expected to replace orthogonal frequency division multiplexing (OFDM) in future sixth-generation (6G) networks. FBMC/OQAM has high spectrum efficiency, cyclic prefix (CP)-free transmission, decreased out-of-band emission (OOBE), and asynchronous environment robustness. However, the orthogonality criteria of FBMC/OQAM are only in the real field. Therefore, imaginary components of complex-valued OQAM symbols cause imaginary interferences among subcarriers, affecting channel estimation (CE) processing operations. Channel estimation is a critical component of wireless communication systems. Channel estimate allows the receiver to approximate channel impulse response (CIR) to determine the impacts of the communication channel on the sent symbols. So, an accurate channel estimate is critical in FBMC/OQAM. In this review, we focus on the Preamble-based method, one of the basic methods for channel estimation in FBMC. Three preamble-based approaches have been studied: the interference approximation method (IAM), the interference cancellation method (ICM), and pairs of pilots (POP) using a single antenna and multiple input multiple outputs (MIMO). Compare them regarding bit error rate (BER) and mean square error. Also, it compares different interference approximation methods in terms of bit error rate (BER), magnitude, and peak average power ratio (PAPR). The review found the superiority of M-IAM and NPS in spectrum efficiency and PAPR. Future work that can help the researcher in this field.

Adaptive Hybrid Deep Learning Based Effective Channel Estimation in MIMO-Noma for Millimeter-Wave Systems with an Enhanced Optimization Algorithm

The channel estimation is crucial in the “millimeter Wave (mmWave) Massive Multiple-Input MultipleOutput (MIMO) and Non-Orthogonal Multiple Access (NOMA)” devices. Hybrid beamforming techniques are employed nowadays to minimize the complexity and equipment price. However, the absence of digital beam forming in mmWave affects the dynamic range and accuracy of the channel estimation. Previous research has concentrated mainly on predicting narrow-band mmWave channels using deep learning networks, as the wideband channels of mmWave create a considerable range and noise issue. Accurate channel estimation in the MIMO system is challenging because of the increased number of antennas and radio frequency (RF) chains. MIMO system communications using mmWave are frequently chosen because of their massive spectrum resources. Therefore, it is essential to tackle the obstacles obtained in the standard channel estimation framework by developing a MIMO-NOMA network with the help of deep learning methods Hence, this paper proposes an efficient hybrid deep learning model for channel estimation in MIMO-NOMA for mmWave systems. At first, the channel estimation is carried out using the Adaptive Hybrid Deep Learning (AHDL) model, where it combines both Autoencoder and Recurrent Neural Network (RNN). Here, the parameters are optimized using the Improved Red-tailed Hawk Algorithm (IRHA). Later the hardware cost and system complexity are reduced by performing the hybrid beam-forming process. Numerical results show that the proposed channel estimation and pilot estimation process outperforms the state-of-the-art approaches.

Adaptive Frame Structure Design for Sensing-Assisted Downlink Communication in the Vehicle-to-Infrastructure Scenario.

Vehicle-to-everything (V2X) is considered a key factor in driving the future development of intelligent transport, which requires high-quality communication and fast sensing of vehicle information in high-speed mobile scenarios. However, high-speed mobility makes the wireless channel change rapidly, which requires frequent channel estimation and channel feedback between a vehicle and the roadside unit (RSU), resulting in an increase in communication overhead. At the same time, the high maneuverability of vehicles leads to frequent switching and misalignment of communication beams, so the RSU must have better beam prediction and tracking capabilities. To address this problem, this paper proposes an adaptive frame structure design scheme for sensing-assisted downlink (DL) communication. The basic idea of the scheme involves analyzing the communication model during the vehicle's movement. This analysis aims to establish a theoretical relationship between the Symbol Error Rate (SER) and the following two key factors: the vehicle's starting position and the distance it travels across. Subsequently, the scheme leverages the vehicle's position data, as detected by the RSU, to calculate the real-time SER for DL communication. The SER threshold is set based on the requirements of DL communication. If the real-time SER is below this threshold, channel estimation becomes unnecessary. This decreases the frequency of channel estimation and frees up time and frequency resources that would otherwise be occupied by channel estimation processes within the frame structure. The design of an adaptive frame structure, as detailed in the above scheme, is presented. Furthermore, the performance of the proposed method is analyzed and compared with that of the traditional communication protocol frame structure and the beam prediction-based frame structure. The simulation results indicate that the communication throughput of the proposed method can be improved by up to 6% compared with the traditional communication protocol frame structure while maintaining SER performance.

Optimized CNN and adaptive RBFNN for channel estimation and hybrid precoding approaches for multi user millimeter wave massive MIMO

ABSTRACT The millimetre-wave (mmWave) communication satisfies the demand for high data rates due to the characteristic of wide bandwidth. Using massive multiple-input multiple-output (MIMO) technology, a significant propagation loss of mmWave communication is effectively compensated. However, it is challenging to provide a specialised radio frequency chain for each antenna due to the constrained physical area with closely spaced antennas and prohibitive power consumption in mmWave massive MIMO systems. This paper presents novel approaches for effective channel estimation and hybrid precoding in mmWave communication systems. To address the challenges of channel estimation, a convolutional neural network (CNN) is utilised, and network parameters are optimised using enhanced whale optimization algorithm (EWOA). The proposed CNN-based channel estimation method aims to accurately estimate the channel in mmWave systems with enhanced efficiency and reduced complexity. By training CNN using EWOA optimisation algorithm, the network parameters are fine-tuned to improve accuracy and generalisation capability of channel estimation process. Furthermore, hybrid precoding is achieved using adaptive radial-basis function neural networks (adaptive RBFNNs) which enables efficient precoding while minimising complexity. Moreover, the adaptive RBFNN approach determines the optimal precoding weights based on channel state information, resulting in a improved performance and a reduced computational overhead. The performance analysis is validated using the MATLAB/Simulink software and offers to provide effectual and reliable mmWave communication systems, facilitating the realisation of high-speed and high-capacity wireless networks.

Energy‐aware power allocation using Ladybug Beetle Honey Badger Optimization in multiple‐input multiple‐output‐non‐orthogonal multiple access with multiple users

SummaryThe non‐orthogonal multiple access (NOMA) is highly capable of serving multiple users at similar times and frequencies. The power allocation (PA) is widely considered as a main factor in NOMA for efficient communication. Here, the application of multiple‐input multiple‐output (MIMO) is added to NOMA to fulfill demands of enriched spectral efficiencies and extra user data. In this research, the Ladybug Beetle Honey Badger Optimization (LBHBO) is proposed for efficient PA in MIMO‐NOMA. Initially, the received signals from the user are modulated for amplitude and frequency. Then, user grouping is conducted by fuzzy local information c‐means (FLICM) clustering followed by using PA done by proposed LBHBO. This power is then moved to the transmitter and then to the channel estimation process. Moreover, cyclic prefix (CP) removal is carried out that tends to discrete Fourier transform (DFT). Finally, quadrature amplitude modulation (QAM) demodulation is performed for reallocated output. Furthermore, LBHBO is formed by combining Ladybug Beetle Optimization (LBO) and Honey Badger Algorithm (HBA). The performance offered by the LBHBO‐PA with maximal values with energy efficiency (EE) of 25.38 Mbits/s, sum rate of 1.29 Mbits/s, and achievable rate of 100.47 Mbits/s.

Maximizing the Downlink Data Rates in Massive Multiple Input Multiple Output with Frequency Division Duplex Transmission Mode Using Power Allocation Optimization Method with Limited Coherence Time

The expected development of the future generation of wireless communications systems such as 6G aims to achieve an ultrareliable and low-latency communications (URLLCs) while maximizing the data rates. These requirements push research into developing new advanced technologies. To this end, massive multiple input multiple output (MMIMO) is introduced as a promising transmission approach to fulfill these requirements. However, maximizing the downlink-achievable sum rate (DASR) in MMIMO with a frequency division duplex (FDD) transmission mode and limited coherence time (LCT) is very challenging. To address this challenge, this paper proposes a DASR maximization approach using a feasible power allocation optimization method. The proposed approach is based on smartly allocating the total transmit power between the data transmission and training sequence transmission for channel estimation. This can be achieved by allocating more energy to the training signal than the data transmission during the channel estimation process to improve the quality of channel estimation without compromising more training sequence length, thus maximizing the DASR. Additionally, the theory of random matrix approach is exploited to derive an asymptotic closed-form expression for the DASR with a regularized zero-forcing precoder (RZFP), which allows the power optimization process to be achieved without the need for computationally complex Monte Carlo simulations. The results provided in this paper indicate that a considerable enhancement in the DASR performance is achieved using the proposed power allocation method in comparison with the conventional uniform power allocation method.

Simplified Deep Reinforcement Learning Approach for Channel Prediction in Power Domain NOMA System.

In this work, the impact of implementing Deep Reinforcement Learning (DRL) in predicting the channel parameters for user devices in a Power Domain Non-Orthogonal Multiple Access system (PD-NOMA) is investigated. In the channel prediction process, DRL based on deep Q networks (DQN) algorithm will be developed and incorporated into the NOMA system so that this developed DQN model can be employed to estimate the channel coefficients for each user device in NOMA system. The developed DQN scheme will be structured as a simplified approach to efficiently predict the channel parameters for each user in order to maximize the downlink sum rates for all users in the system. In order to approximate the channel parameters for each user device, this proposed DQN approach is first initialized using random channel statistics, and then the proposed DQN model will be dynamically updated based on the interaction with the environment. The predicted channel parameters will be utilized at the receiver side to recover the desired data. Furthermore, this work inspects how the channel estimation process based on the simplified DQN algorithm and the power allocation policy, can both be integrated for the purpose of multiuser detection in the examined NOMA system. Simulation results, based on several performance metrics, have demonstrated that the proposed simplified DQN algorithm can be a competitive algorithm for channel parameters estimation when compared to different benchmark schemes for channel estimation processes such as deep neural network (DNN) based long-short term memory (LSTM), RL based Q algorithm, and channel estimation scheme based on minimum mean square error (MMSE) procedure.

Design of Multi-User Noncoherent Massive SIMO Systems for Scalable URLLC.

This paper develops and optimizes a non-orthogonal and noncoherent multi-user massive single-input multiple-output (SIMO) framework, with the objective of enabling scalable ultra-reliable low-latency communications (sURLLC) in Beyond-5G (B5G)/6G wireless communication systems. In this framework, the huge diversity gain associated with the large-scale antenna array in the massive SIMO system is leveraged to ensure ultra-high reliability. To reduce the overhead and latency induced by the channel estimation process, we advocate for the noncoherent communication technique, which does not need the knowledge of instantaneous channel state information (CSI) but only relies on large-scale fading coefficients for message decoding. To boost the scalability of noncoherent massive SIMO systems, we enable the non-orthogonal channel access of multiple users by devising a new differential modulation scheme to ensure that each transmitted signal matrix can be uniquely determined in the noise-free case and be reliably estimated in noisy cases when the antenna array size is scaled up. The key idea is to make the transmitted signals from multiple geographically separated users be superimposed properly over the air, such that when the sum signal is correctly detected, the signal sent by each individual user can be uniquely determined. To further enhance the average error performance when the array antenna number is large, we propose a max-min Kullback-Leibler (KL) divergence-based design by jointly optimizing the transmitted powers of all users and the sub-constellation assignments among them. The simulation results show that the proposed design significantly outperforms the existing max-min Euclidean distance-based counterpart in terms of error performance. Moreover, our proposed approach also has a better error performance compared to the conventional coherent zero-forcing (ZF) receiver with orthogonal channel training, particularly for cell-edge users.

Model-Driven Deep-Learning-Based Underwater Acoustic OTFS Channel Estimation

Accurate channel estimation is the fundamental requirement for recovering underwater acoustic orthogonal time–frequency space (OTFS) modulation signals. As the Doppler effect in the underwater acoustic channel is much more severe than that in the radio channel, the channel information usually cannot strictly meet the compressed sensing sparsity assumption in the orthogonal matching pursuit channel estimation algorithm. This deviation ultimately leads to a degradation in system performance. This paper proposes a novel approach for OTFS channel estimation in underwater acoustic communications, utilizing a model-driven deep learning technique. Our method incorporates a residual neural network into the OTFS channel estimation process. Specifically, the orthogonal matching pursuit algorithm and denoising convolutional neural network (DnCNN) collaborate to perform channel estimation. The cascaded DnCNN denoises the preliminary channel estimation results generated by the orthogonal matching pursuit algorithm for more accurate OTFS channel estimation results. The use of a lightweight DnCNN network with a single residual block reduces computational complexity while still preserving the accuracy of the neural network. Through extensive evaluations conducted on simulated and experimental underwater acoustic channels, the outcomes demonstrate that our proposed method outperforms traditional threshold-based and orthogonal matching pursuit channel estimation techniques, achieves superior accuracy in channel estimation, and significantly reduces the system’s bit error rate.

Phase-Domain Injected Training for Channel Estimation in Constant Envelope OFDM

Constant envelope orthogonal frequency division multiplexing (CE-OFDM) is a multi-carrier waveform with 0 dB peak-to-average power ratio (PAPR). This property enables the exploitation of multi-carrier waveforms with non-linear power amplifiers, avoiding the undesirable clipping effects. However, the existing channel estimation techniques designed for OFDM cannot be reused, since the use of a phase modulator makes CE-OFDM a non-linear waveform. Previous works assumed that the channel estimation process relies on the transmission of preambles, and the data symbols are equalized using a frequency domain equalizer (FDE). To avoid the overhead induced by preambles, a phase-domain injected training (PIT) is proposed, where the pilot sequence is embedded in the phase dimension of the data symbols. This novel approach does not waste time and/or frequency resources as in preamble-based schemes. Moreover, it does not require additional power for the training. The received symbols are averaged with a dual procedure, and owing to the particular structure of CE-OFDM, the channel estimates are recovered. Also, the analytical expression of the channel estimation mean squared error (MSE) is derived. Finally, several numerical results illustrate the performance of the proposal, showing that the MSE, bit error rate (BER) and achievable rate are improved, as compared to the existing works.

SFBC Recognition over Orthogonal Frequency Division Multiplexing Schemes in the Presence of Inphase and Quadrature Phase Discrepancies for Cognitive Radio Applications

A radio is adaptive if it can autonomously analyze the communications environment and instantly modify its settings to achieve the best possible efficiency. In orthogonal frequency division multiplexing (OFDM) transmissions, identifying the space frequency block coding (SFBC) category utilized is one of the most important tasks of an adaptive receiver. Previous approaches to this problem did not take into consideration the fact that real systems typically suffer from transmission defects. This study offers a novel maximum likelihood recognizer capable of distinguishing between SFBC OFDM waveforms in the context of inphase and quadrature phase differences (IQDs). The theoretical findings show that IQDs arising from the transmitter and recipient can be combined with channel paths to generate so-called effective channel paths. The conceptual examination demonstrates that the outlined maximum likelihood strategy of the SFBC recognition and effective channel estimation processes is implemented by an expectation maximization tool utilizing the error control decoders’ soft outputs. The simulations results reveal that the suggested strategy delivers a much greater recognition accuracy than the typical approaches outlined in the comparable literature. At a signal-to-noise ratio (SNR) of 14 dB, for example, the proposed approach achieves a bit error rate (BER) of 0.00002, which is very close to the case of perfect estimation and compensation for IQDs, outperforming the previous reported works which achieved BERs of 0.01 and 0.02.

Over-the-Air Antenna Array Calibration for mmWave Hybrid Beamforming Systems Based on Monte Carlo Markov Chain Method

The antenna phase calibration is critical for the millimeter wave (mmWave) hybrid beamforming communication system. Especially, with the increasing number of antennas being deployed in future massive MIMO systems, it is unrealistic to calibrate each antenna path in a microwave anechoic chamber. This work proposes a phase calibration based on over-the-air (OTA) scheme for mmWave hybrid beamforming systems, where the calibration process is performed automatically by the online signal transmission. The challenge for the OTA-based phase calibration is the imperfect channel estimation due to the phase error. To solve the challenge, we simplify the channel estimation process by integrating the beam alignment and phase calibration process. Consequently, the phase calibration is formatted to an MMSE-criterion based optimization problem solved by the Monte Carlo Markov Chain (MCMC) with probabilistic conversion improved Gibbs sampling method. Furthermore, an alternating iteration algorithm is developed to calibrate phase deviation for both the transmitter and receiver. We also extend our method to solve the joint amplitude and phase calibration problem. According to the simulation result, the calibration results outperform existing methods when the signal-to-noise ratio is less than 15dB. Besides, the proposed method exhibits a high beamforming gain during the calibration process, which paves the way for future massive device deployment in a practical system.

An efficient hybrid strategy for uplink channel estimation in massive MIMO systems based on spatially correlated channels

SummaryThe channel estimation (CE) process is an important phase that has a considerable influence on the performance of massive multiple‐input multiple‐output systems, in particular, in a more realistic scenario where the channels are spatially correlated (ScD). Thereby, in this work, the uplink (UL) CE process and channel hardening (CH) feature is addressed for ScD Rayleigh fading channels using the statistical Bayesian minimum mean square error estimator. The spatial correlation (SC) of the channels is described using different models, namely, the Gaussian local scattering (GLS) model, the uniform local scattering model, and the proposed hybrid model. Each model (i.e., GLS model and the uniform local scattering model) is studied using two arrangements, that is, for a uniform linear array (ULA) and uniform planar array (UPA). Moreover, the CH feature is investigated under SC of the channels using different models. Furthermore, this study proposes an efficient hybrid strategy based on SC of the channels for UL CE; that is, this work proposes a hybrid covariance matrix (CM) for UPA arrangement by relying on the Kronecker product of the CMs generated through two ULA arrangements, where the first CM is generated through horizontal ULA using GLS model, whereas the second CM is generated through vertical ULA using uniform local scattering model (i.e., one‐ring model). Numerical results regarding CE and CH are provided to assert the theoretical expressions, where the CE is evaluated using the normalized mean square error, whereas the CH is assessed using the variance of CH.

A novel blind spatial-based random access to pilots (BSB-RAP) in overloaded massive MIMO systems

In this study, to increase the success rate of active user admission in overloaded massive multi-input multi-output (MIMO) systems, a new spatially based random access to pilots (RAP) is proposed to assign orthogonal pilots to the users requesting network access. Therefore, by increasing the acceptance rate of users in a cell, this approach reduces the training overhead and waste of resources. In the massive MIMO for crowd scenarios, the main issue is the limited number of available orthogonal pilots employed by the users in the channel estimation process. This novel approach as spatially based random access enables us to have more connected users during every coherence interval (CI) despite the mentioned limitation. Intrinsic angular domain sparsity of massive MIMO channels and the sporadic traffic of users can help us obtain the spatial features of active UEs in a blind continuous compressed sensing (CCS) approach. Proposed approach is to use a continuous compressed sensing technique based on a prior optimization that provides users’ angle of arrival (AoA) and an innovative space-based RAP protocol to assign orthogonal pilots to active users in coherent transmission. Unlike the previous works, this strategy does not need to limit the number of users to the number of available orthogonal pilots due to the employed spatial degrees of freedom.

Deep Learning Multi-Class Approach for Human Fall Detection Based on Doppler Signatures.

Falling events are a global health concern with short- and long-term physical and psychological implications, especially for the elderly population. This work aims to monitor human activity in an indoor environment and recognize falling events without requiring users to carry a device or sensor on their bodies. A sensing platform based on the transmission of a continuous wave (CW) radio-frequency (RF) probe signal was developed using general-purpose equipment. The CW probe signal is similar to the pilot subcarriers transmitted by commercial off-the-shelf WiFi devices. As a result, our methodology can easily be integrated into a joint radio sensing and communication scheme. The sensing process is carried out by analyzing the changes in phase, amplitude, and frequency that the probe signal suffers when it is reflected or scattered by static and moving bodies. These features are commonly extracted from the channel state information (CSI) of WiFi signals. However, CSI relies on complex data acquisition and channel estimation processes. Doppler radars have also been used to monitor human activity. While effective, a radar-based fall detection system requires dedicated hardware. In this paper, we follow an alternative method to characterize falling events on the basis of the Doppler signatures imprinted on the CW probe signal by a falling person. A multi-class deep learning framework for classification was conceived to differentiate falling events from other activities that can be performed in indoor environments. Two neural network models were implemented. The first is based on a long-short-term memory network (LSTM) and the second on a convolutional neural network (CNN). A series of experiments comprising 11 subjects were conducted to collect empirical data and test the system's performance. Falls were detected with an accuracy of 92.1% for the LSTM case, while for the CNN, an accuracy rate of 92.1% was obtained. The results demonstrate the viability of human fall detection based on a radio sensing system such as the one described in this paper.

Underwater Acoustic Channel Estimation Based on Sparse Bayesian Learning Algorithm

The channel estimation algorithm based on sparse Bayesian learning proposed in recent years shows better performance than the traditional channel estimation algorithm by effectively reducing the convergence error in the channel estimation process. However, the sparse Bayesian learning algorithm based on expectation maximization (EM-SBL) is difficult to meet the practical applications with low complexity and power consumption. In order to guarantee the long-term stable communication of underwater devices, this paper proposes the fast sparse Bayesian learning algorithm based on Fast Marginal Likelihood Maximization (FM-SBL) to estimate underwater acoustic channels with low power consumption and high performance. Simulation and sea trial results show the output BER after channel estimation of FM-SBL is similar to that of EM-SBL, better than LS, MP and OMP, and it has good robustness in fast and slow time-varying channels. In terms of running speed, the FM-SBL algorithm is 16.7% of EM-SBL algorithm, which greatly reduces the estimation time.

Physical Layer Security in Downlink of Cell-Free Massive MIMO With Imperfect CSI

This paper investigates the threat of passive eavesdropping on downlink cell-free massive MIMO (CF-MaMIMO) systems, examining in a particular system under the effects of imperfect channel estimation. Physical layer security (PLS) techniques and power allocation algorithms are typically adopted to deteriorate the quality of eavesdropped signals. In the downlink stream, artificial noise (AN) is broadcasted simultaneously with the users’ data streams, with the aim of jamming the eavesdropper’s signal without sacrificing the quality of service (QoS). However, imperfect channel estimation results in AN leakage to legitimate users. Our work considers this condition, and the power allocation algorithms we present determine the minimum power that is needed to maintain the user’s Qos even in the presence of leaked AN. We first propose the cooperative PLS algorithm (COP), which facilitates AN broadcasting via access point (AP) cooperation. Unfortunately, this cooperation wastes some of the power used to send the AN and, in most cases, increases the computational complexity. We then present the independent PLS algorithm (IND), where the goal is to regain this power by allowing each AP to broadcast AN independently. However, to meet the feasibility criterion, this occurs at the cost of increasing the number of used antennas. This technique reduces the power allocation complexity but increases the computational complexities of the precoder design and the channel estimation process. Our results reveal that the proposed algorithms enhance the security performance of CF-MaMIMO. We evaluate such performance from numerous angles including the number of users, number of APs, QoS, beamforming, AN leakage, and channel estimation techniques.

A Hybrid Optimization-Based Technique for Channel Estimation in OFDM System: A Parametric Approach

The performance of OFDM system depends on the how efficient channel estimation is, which directly impactsits bit error rate (BER). In this research work, the novel technique of pseudo-pilot aided OFDM system is usedits channel estimation with least square and Recursive Least Squares approach. In proposed technique, for channel estimation Pseudo-pilot technique is used in OFDM system over AWGN fading channels. A hybridization technique has been implemented to alleviate the error rate in the signals. The hybrid optimization approach is implemented on the estimated output for the optimum solution. The combination of the two optimization techniques is particle swarm optimization (PSO) and Moth Flame Optimization (MFO) method that is used for optimization of the performance rate. To get more optimum solutions (reducing BER) OFDM system is trained with neural network. The performance of the proposed techniques and the weighted scheme are compared and verified using computerized simulation carried out using Matrix Laboratory software. The hybrid approach is able to achieve low BER of the network. The BER of PSO is 1.004 × 10−7 whereas for hybrid optimization (PSO + MFO) BER is 6.275 × 10−8 at 18 dB SNR. After training of the whole system is done with BPNN which will further reduce the BER while increasing SNR. By using BPNN, BER will further reduce to 1.243 × 10−8 at 18 dB SNR. It means hybrid optimization is done to optimize the performance of the channel and reduce the BERs, which will help to increase the channel estimation process as well as channel capacity and further reduces the losses while transmission from one end to the other end.

A systematic literature review on channel estimation in MIMO-OFDM system: performance analysis and future direction

Abstract Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) is a familiar modern wireless broadband technology due to its resistance against multipath fading, high data transmission rate, and spectral efficiency. This technology delivers dependable communication as well as a large range of coverage. The precise recovery of Channel State Information (CSI) and synchronization among the receiver and transmitter are two major challenges for MIMO-OFDM systems. Several estimate procedures, like blind, pilot-aided, and semi-blind channel estimating, are used to recover channel state information. Yet, those systems have several flaws that cause them to perform poorly. Hence, this paper describes the basic introduction of the Channel Estimation (CE) process in the MIMO-OFDM system. The main goal of this survey is to study analyzing and categorizing the channel estimation algorithms, and simulation tools in different contributions. Further, the performance analysis with different performance metrics from diverse contributions is pointed out. Thus, this review article presents a detailed overview of the various channel estimation schemes that have been exploited in the OFDM channel to enhance the estimation of the CSI in the MIMO-OFDM systems. This work presents and discusses the relevant comparative results and computational complexity for all of these CE systems. Furthermore, there is a list of open study directions for further exploration.

R&D of a low-complexity OFDM acoustic communication payload for Micro-AUV in confined space

With small size, high flexibility, low cost, and deployment convenience, Micro-sized autonomous underwater vehicle (Micro-AUV) is capable of performing diverse underwater missions efficiently in confined underwater space, for the extensive purpose of rescue, sightseeing, pipeline engineering and so on. The underwater acoustic (UWA) communication technique provides an effective way to support this types of underwater mission for telemetry and remote control of Micro-AUV. However, while the adverse multipath caused by confined space poses significant challenge to the classic coherent acoustic communication schemes that need channel estimation and equalization processing, the employment of non-coherent communication scheme is generally limited by low data rate. By utilizing time-domain and frequency-domain differential modulation to suppress the influence of multipath, a low-complexity UWA communication payload is designed to provide an effective solution to make a tradeoff between data rate and implementation complexity. Based on a STM32 series processor, this paper introduced the software and hardware implementation of a time-frequency differential OFDM UWA communication payload for Micro-AUV and presented the performance evaluation of the system in confined underwater space. The experimental results achieved in a confined lake show that the proposed system has the potential of being used for Micro-AUV to achieve a data rate of 1.96 kbps at a distance of 200m with acceptable implementation overhead.