Changes In Thickness Research Articles

Reliability of Semitendinosus and Biceps Femoris Aponeurosis Thickness Using B‐Mode Ultrasound

ObjectivesThe aim of the present study was to assess the reliability of aponeurosis and muscle thickness of the hamstrings using ultrasound (US).MethodsUS images were captured from the semitendinosus (ST) and biceps femoris long head (BFlh) of 30 individuals (15 females), undergoing two testing sessions with a 24‐hour interval. Measurements were taken at six sites along the thigh at two knee angles (0° = full extension and 90°) in prone position. Aponeurosis and muscle thickness across the entire length of ST and BFlh were evaluated using computational image segmentation which generated ~360 data points per participant.ResultsThe intraclass correlation coefficients ranged from 0.937 to 0.998 while the standard error of measurement varied from 0.88 to 2.72% for superficial aponeurosis, from 1.41 to 2.29% for deep aponeurosis, and from 1.50 to 4.22% for muscle thickness. The minimal detectable change ranged from 2.44 to 7.56% for the superficial aponeurosis, from 3.57 to 6.27% for deep aponeurosis, and from 4.17 to 11.70% for BF and ST muscle thickness.ConclusionsEvaluation of hamstring aponeurosis and muscle thickness measurements at rest displayed very high reliability and, hence, such measurements can be used to diagnose changes in thickness due to injury or exercise interventions.

Volumetric changes of porcine collagen matrix and free gingival grafts for soft-tissue grafting to increase the width of keratinized tissue around dental implants: a retrospective clinical study

Abstract Aim To compare three-dimensional changes of aporcine derived collagen matrix (CM) and free gingival grafts (FGG) for increasing keratinized tissue (KT) at dental implants over a 24-month follow-up period. Materials and methods This retrospective study enrolled 25 patients exhibiting 41 implants with deficient KT width (i.e., < 2 mm) who underwent soft tissue augmentation using either CM (11 patients/15 implants) or FGG (14 patients/26 implants). The primary outcome was tissue thickness change (mm) at treated implant sites between 1- (S0), 12- (S1), and 24-months (S2). Secondary outcome was the changes of KT width over a 24-month follow-up period. Results Dimensional analyses from S0 to S1 and from S0 to S2 revealed a mean decrease in tissue thickness of -0.05 ± 0.35 mm and − 0.31 ± 0.41 mm in the CM group, and − 0.23 ± 0.38 mm and − 0.22 ± 0.81 mm in the FGG group, with no significant differences found between the groups (S0-S1: p = 0.14, S0-S2: p = 0.58). Within S1 and S2, the CM and FGG groups displayed comparable tissue thickness reduction (CM: -0.32 ± 0.53 mm, FGG: -0.02 ± 0.21 mm; p = 0.07). The FGG group exhibited a significantly greater KT gain 24-months compared to the CM group (CM: 1.50 ± 1.14 mm, FGG: 4.04 ± 1.65 mm; p < 0.001). Conclusions CM and FGG were associated with comparable three-dimensional thickness changes over a period of 24 months. A significantly wider KT band could be established in the FGG group. Graphical Abstract

Association of hypertension defined by the 2017 ACC/AHA guideline and choroidal thickness changes in type 2 diabetes: a 2-year longitudinal study

Association of hypertension defined by the 2017 ACC/AHA guideline and choroidal thickness changes in type 2 diabetes: a 2-year longitudinal study

Abstract 4120375: Penetrance and Phenotype Conversion Rate of Genetic Hypertrophic Cardiomyopathy in an Academic Biobank

Introduction: Hypertrophic cardiomyopathy (HCM) is an autosomal dominant condition with incomplete penetrance and variable expressivity. Given the increasing prevalence of sequencing and current guidelines on secondary finding disclosure, HCM P/LP alleles are increasingly being returned to patients who undergo genetic testing for other reasons. Whether individuals carrying P/LP HCM variants discovered in a genome-first context have progressive endophenotypes indicative of HCM remains poorly understood. Methods: To evaluate the penetrance and phenotype conversion rate of adults with P/LP HCM variants, we leveraged the Massachusetts General Brigham Biobank (MGBB), which consists of 36,417 participants with genotyping array and clinical data. Primary images of the earliest and latest TTE studies were reviewed for measurements of the posterior wall (PW), interventricular septum (IVS), and left ventricular morphology. Phenotype-positive (P+) status was defined by a PW or IVS thickness of at least 13 mm. Results: P/LP HCM variants were identified in 42 (0.1%) individuals with mean (SD) age 50.0 (16.6) years and 21 (50%) female sex. The most common HCM variants were in MYBPC3 (44%) and MYH7 (40%), followed by TNNI3(7%), MYL3 (7%), and TNNT2 (2%). Among the 42 genotype-positive (G+) individuals in MGBB, 17 (40%) had pre-existing HCM diagnoses prior to genomic return of results (gRoR). In contrast, 25 (60%) G+ individuals lacked a prior HCM diagnosis, among whom gRoR prompted TTE studies in 13 patients, revealing evidence of HCM in 9 individuals. Among the 42 G+ patients, 25 (58%) patients had completed at least two TTE studies, with a median [IQR] of 6 [3-9] TTE studies per patient, across a span of 10 [7-15] years follow-up. At the time of first TTE, 16 (64%) patients were P+ while 9 (36%) were P-. No G+, P- individuals converted to P+ over 10 years follow-up, nor was there any significant change in IVS or PW thickness. In contrast, individuals who were P+ at the initial TTE exhibited thickening PW (25% increase, CI 97.5% of 6 to 44) and IVS (26% increase, CI 97.5% of 4 to 49) over 8 years follow-up. Conclusion: In a genome-first approach, we identified 42 individuals in the MGBB with a P/LP HCM variant, among whom 60% lacked a prior clinical diagnosis of HCM. Targeted phenotyping revealed that nearly half of this newly identified group were P+. Over a median of 10 years follow-up, we observed a 0% phenotype conversion rate among G+, P- adult carriers of HCM variants.

Evaluation of the macula, retinal nerve fiber layer and choroid thickness in premature ovarian failure using spectral-domain optical coherence tomography

Background The aim of our study is to describe the basal findings at the first diagnosis of the disease in patients with premature ovarian failure (POF) and to draw attention to the early changes in the macula, optic nerve head and choroid. Methods In a prospective case-control study, 90 patients with POF and 90 control patients were evaluated. All participants underwent the same ophthalmic examination, including visual acuity, intraocular preasure measurement, anterior and posterior segment evaluation, macular and coroidal thickening, and retinal nerve fiber layer (RNFL) measurements with the same device (Spectral Domain OCT, software version 5.6.3.0, Heidelberg, Germany). Results The median age was 30.00 (28.00–31.00) in the control group and 29.00 (27.00–31.00) in the POF group ( p = 0.249). The median thickness of the temporal outer macular region was statistically significantly thinner in the POF group (295.00 (289.00–303.25)) compared to the control group (306.00 (290.75–328.00)) ( p < 0.001). There was a statistically significant decrease in all choroidal regions ( p < 0.001), including the central, nasal 500, nasal 1500, temporal 500, and temporal 1500 regions in the POF group according to the control group. Conclusion An increase in intraocular pressure in the postmenopausal period has been reported, suggesting a link between the postmenopausal decline in sex hormones and glaucoma. Our study is the first to monitor changes in choroidal, retinal thickness and RNFL in POF images showing early menopausal symptoms.

Mechanical and surface characterisation of additively manufactured polyetheretherketone for the tribo test

Purpose The additive manufacturing process, such as fused filament fabrication based on material extrusion, fabricates the samples layer-by-layer. The various parameters in the process significantly affect the dimensions, structure and mechanical properties of the fabricated parts. The purpose of this paper is to investigate the surface and mechanical properties that can affect the contact characteristics with other materials during tribological tests. Design/methodology/approach The investigation of 3D-printed Polyetheretherketone (PEEK) includes the measurement of dimensions, microhardness, surface roughness, surface energy and tensile strength to define material characteristics. The crystallinity is measured using an X-ray diffractometer to understand the hardness behaviour. Findings The printing parameters affect its surface roughness, hardness and crystallinity. This change in parameters such as layer thickness and infill density impacts mechanical properties such as hardness and surface roughness, which will influence the contact mechanism with the counter body during any tribological test. The change in a single parameter during the sample fabrication and the change in the surface and mechanical properties are observed. Research limitations/implications The material cost plays an important role in conducting numerous destructive tests, which is a major limitation to conducting parameter optimisation by varying more parameters. The study is limited to the as-fabricated samples rather than finished samples and without any heat treatment. Achieving optimal parameters is integral to the success of additive manufacturing, ensuring the production of components with consistent performance. Practical implications The study aims at the application of 3D-printed PEEK for bush or journal bearings that can be directly used in practice. The mechanical properties discussed in this paper can fill the gap between theory and practice. Social implications The research provides all fundamental properties, including the printing parameters and their effect on the dimensions and surface structure, which are required to understand the material and its use. The results are consistent as at least four samples were tested for tribological behaviour. The conclusion is updated as per suggestions. Originality/value The study outlines the relationship between the change in layer thickness and infill density with changes in surface energy, surface roughness, hardness and tensile strength. The deformation and adhesion during the friction test depend on these properties.

Clinical efficacy of optical coherence tomography parameters to predict the visual field outcome following pituitary adenoma surgery

Purpose To investigate the factors affecting visual field recovery in patients with pituitary adenoma following surgical removal, both eyes of 35 patients with pituitary adenoma who had been followed up for > six months post-surgery were retrospectively analyzed. Material and methods Pre- and post-operative visual acuity, visual field test, retinal nerve fiber layer (RNFL), and ganglion cell inner plexiform layer (GCIPL) thickness were investigated. The average age of the 35 patients was 58.3 ± 11.5 years. Preoperatively, 30 eyes (mean average RNFL thickness, 99.73 ± 5.89 μm) and 40 eyes (mean average RNFL thickness, 77.55 ± 8.35 μm) were included in the thick (≥ 90 μm) and thin RNFL group (< 90 μm), respectively. Results In the thick RNFL group, pre- and post-operative mean deviation (MD) and pattern standard deviation (PSD) were favorable (all p < 0.001), and the proportion of eyes of postoperative MD change which were stable or improved was greater than in the thin RNFL group (p = 0.042). Preoperative MD, RNFL (except nasal quadrant) and GCIPL thickness were positively correlated to postoperative MD values (all, p < 0.05). Preoperative MD and temporal RNFL thickness were significantly correlated with postoperative MD change rate (p = 0.03 and 0.04, respectively). Preoperative GC IPL thickness and postoperative MD change rate were not significantly correlated (p = 0.61). Using univariate regression analysis, preoperative best corrected visual acuity (Odds ratio [OR], 0.050; p < 0.001), tumor volume (OR, 1.110, p = 0.002), higher preoperative MD values (OR, 0.858; p < 0.001), lower preoperative PSD values (OR, 1.169, p = 0.002), thick RNFL (OR, 0.215; p = 0.003) and thick GCIPL (OR, 0.305, p = 0.018) were significantly associated with a good visual field outcome following surgery. According to multivariate analysis, any other parameters were not significant. In patients with thick RNFL, postoperative MD values were better than in the thin RNFL group. Conclusions Eyes with preoperative higher MD and thick temporal RNFL showed more improvement in their visual fields postoperative. Preoperative thick RNFL could be a potential predictor of visual field recovery following TSA-TR, while macular GCIPL thickness does not appear to be a reliable predictor.

Pressure-tolerant survival mechanism of Schizophyllum commune 20R-7-F01 isolated from deep sediments 2 kilometers below the seafloor

In anaerobic high hydrostatic pressure (HHP) sedimentary environments below the seafloor, fungi are found to dominate the eukaryotic communities, playing crucial ecological roles. However, the specific mechanisms by which fungi adapt to anaerobic HHP environments remain unclear. In this study, we investigated Schizophyllum commune 20R-7-F01 isolated from coal-bearing sediments at a depth of 2 km below the seafloor. By assessing the cell viability, biomass, and cell wall thickness changes of strain 20-7-1 under different HHP conditions, we observed that, compared to 0.1 MPa, strain 20-7-1 exhibited slower growth rates and decreased cell viability at 15 MPa and 35 MPa, yet demonstrated significant pressure tolerance. Transcriptomic and metabolomic analyses revealed that this strain activated the carbohydrate metabolic process to simultaneously utilize ethanol and lactic acid fermentation pathway. Additionally, it activates the oxidoreductase activity and hydrolase activity pathways to detoxify intracellular reactive oxygen species (ROS). Activation of the metal ion binding pathway increases the proportion of unsaturated fatty acids in the cell membrane, while instigation of the integral component of membrane pathway maintains cell wall structural stability. Furthermore, activation of the DNA repair pathway repairs DNA damage, demonstrating its comprehensive adaptive mechanisms against the HHP stress. These research findings deepen our understanding of fungal survival strategies and adaptation mechanisms in extreme environments, laying the groundwork for further exploration of their roles in cycling of carbon, nitrogen, sulfur, and other elements in the deep biosphere.

Retinal Thickness Change Following Cataract Surgery in Eyes with Epiretinal Membranes

Purpose: To investigate intraretinal changes and central millimeter thickness (CMMT) after successful uncomplicated cataract surgery in patients with asymptomatic epiretinal membrane (ERM). Design: prospective, single-center, interventional case series. Methods: Thirty eyes from 26 patients with cataract and ERM (ERM group) and fifteen consecutive eyes with senile cataract with a healthy macula (control group) were included. Best-corrected visual acuity (BCVA) and optical coherence tomography (OCT) as well as biomicroscopy were performed at baseline, one week, one month and three months after cataract surgery. OCT raster scans were further analyzed regarding CMMT and structural changes in the retinal morphology. Results: The baseline mean visual acuity improved significantly three months after cataract surgery in both groups (p < 0.05). CMMT in the ERM group was 342 (±53 μm) at baseline and increased significantly to 356 (±57) μm after three months (p < 0.05). One patient in the ERM group developed temporary cystoid macular edema one week after cataract surgery that resolved under topical treatment within three months. CMMT in the control group increased significantly three months after cataract surgery as well but no structural changes in the retinal morphology were observed in this group. Conclusions: This study provides evidence that cataract surgery in eyes with asymptomatic pre-existing ERM can be considered as safe and effective, resulting in good visual acuity outcomes. However, an increase in CMMT and temporary mild changes in retinal morphology may occur.

The Phase Structure of Wave Disturbances Excited by a Pulsating Source at the Interface of a Liquid Flow of Finite Depth and an Ice Sheet

The floating ice sheet determines the dynamic interaction between the ocean and the atmosphere, affects the dynamics of the sea surface and subsurface waters, since the ice sheet and the entire mass of liquid under it participate in the general vertical movement. The paper investigates the phase structure of wave fields arising at the interface between ice and a flow of homogeneous liquid of finite thickness when flowing around a localized pulsating source of disturbances. The ice sheet is modeled by a thin elastic plate, the deformations of which are small, and the plate is physically linear. An integral representation of the solution is obtained, and the results of calculations of dispersion dependencies and phase patterns for various parameters of wave generation are presented. It is shown that the main parameters determining the characteristics of the amplitude-phase structure of wave disturbances of the ice sheet surface are ice thickness, flow velocity, and pulsation frequency. Numerical calculations demonstrate that when the flow velocities, ice thickness, and frequency change, there is a noticeable qualitative restructuring of the phase patterns of the excited long-range wave fields at the ice-liquid interface.

Effects of percussive massage therapy on fascia echo intensity and fascia thickness in firefighters with chronic non-specific low back pain: a randomized controlled trial

BackgroundChronic non-specific low back pain (CNSLBP) is prevalent among firefighters and may negatively affect their job performance. Alterations in the thoracolumbar fascia (TLF) structure are associated with CNSLBP. Percussive massage therapy (PT) has demonstrated potential in modifying fascial properties and alleviating pain. However, its effects on TLF structure in CNSLBP patients have not been thoroughly investigated. This study evaluates the effects of 6 weeks of PT on TLF echo intensity, thickness, pain, and disability in firefighters with CNSLBP, utilizing ultrasound imaging as a primary assessment tool.MethodsThis six-week randomized controlled trial involved 38 firefighters with CNSLBP. Participants were randomly assigned 1:1 to either the PT group (receiving PT and core stability exercise) or the control group (receiving only core stability exercise). TLF echo intensity and thickness were measured using ultrasound imaging, and disability was assessed using the Roland-Morris Disability Questionnaire (RMQ) at baseline and post-intervention. Pain was measured using the Visual Analog Scale (VAS) at baseline, immediately after the first intervention, three weeks post-intervention, and post-intervention. Paired t-tests were conducted to analyze within-group changes in RMQ and ultrasound data, while ANCOVA was used to assess between-group differences, and repeated measures ANOVA for VAS scores.ResultsParticipants in the PT and control groups were aged 26.6±4.1 and 23.6±1.7 years, respectively, with BMI of 23.1±1.8 and 21.8±1.2 kg/m². The PT group showed significant reductions in bilateral TLF echo intensity post-intervention (left side: mean difference -6.4, 95% CI -9.7 to -3.1, p < 0.001, effect size 0.67; right side: mean difference -7.6, 95% CI -11.8 to -3.3, p < 0.01, effect size 0.60). Changes in TLF thickness were not statistically significant (p > 0.05). The PT group demonstrated significantly lower VAS scores than the control group (mean difference - 0.626, 95% CI -1.087 to -0.165, p = 0.009, effect size 0.63). RMQ scores decreased by -1.3 (95% CI -2.1 to -0.4, p < 0.01, effect size 0.5).ConclusionSix weeks of percussive massage therapy significantly reduced thoracolumbar fascia echo intensity, alleviated pain, and improved functional disability in firefighters with chronic non-specific low back pain, but was not effective in altering fascia thickness. Percussive massage therapy emerges as an effective and safe strategy for managing chronic non-specific low back pain in firefighters.Trial registrationRetrospectively registered in Thai Clinical Trials Registry (TCTR20221223001) on December 22, 2022.

Automatic Defects Recognition of Lap Joint of Unequal Thickness Based on X-Ray Image Processing

It is difficult to automatically recognize defects using digital image processing methods in X-ray radiographs of lap joints made from plates of unequal thickness. The continuous change in the wall thickness of the lap joint workpiece causes very different gray levels in an X-ray background image. Furthermore, due to the shape and fixturing of the workpiece, the distribution of the weld seam in the radiograph is not vertical which results in an angle between the weld seam and the vertical direction. This makes automatic defect detection and localization difficult. In this paper, a method of X-ray image correction based on invariant moments is presented to solve the problem. In addition, a novel background removal method based on image processing is introduced to reduce the difficulty of defect recognition caused by variations in grayscale. At the same time, an automatic defect detection method combining image noise suppression, image segmentation, and mathematical morphology is adopted. The results show that the proposed method can effectively recognize the gas pores in an automatic welded lap joint of unequal thickness, making it suitable for automatic detection.

Seasonal Variation in ATP-Induced Retinal Damage in the Cone-Dominant 13-Lined Ground Squirrel.

To examine whether time of year (relative to hibernation emergence) influences the retinal degenerative effects of intravitreal injection of adenosine triphosphate (ATP) in the 13-lined ground squirrel (13-LGS). Eighteen (9 male, 9 female) 13-LGS in three experimental cohorts (early season, mid-season, late season) (n = 6 each) underwent baseline imaging using scanning light ophthalmoscopy (SLO) and optical coherence tomography (OCT). Animals then received a 10-µL intravitreal injection of 0.723 M ATP, followed by OCT and SLO imaging at 3, 10, and 21 days. Adaptive optics SLO (AOSLO) was performed in animals without retinal damage after the 21-day follow-up. Retinal thickness, choroidal thickness, and cone density measures were compared to values from wild-type controls (n = 12). Five animals (four early season, one late season) showed retinal damage post-ATP injection (Fisher's exact test, P = 0.065). Animals with retinal damage displayed areas of disrupted retinal lamination on OCT. Any changes in OCT thickness were generally present on initial follow-up and resolved at later time points. Follow-up imaging with AOSLO on animals without retinal damage showed no significant differences in the cone mosaic topography from control eyes. Axial length was increased in mid-/late-season cohorts relative to early season (P = 0.0025 and P = 0.0007). In this pilot study, the 13-LGS appears more susceptible to ATP-induced retinal damage during the early season. Future studies adjusting dose based on ocular biometry may help elucidate the impact of time of year on chemical response. Consideration of ocular biometry in this and other animal models is merited when using intravitreal methods of chemical administration.

The safe lowest effective power of subthreshold micropulse laser treatment in Chinese patients with acute or chronic central serous chorioretinopathy

PurposeTo assess the safe, lowest effective laser power of subthreshold micropulse laser (SML) for treating acute and chronic central serous chorioretinopathy (CSC) in Chinese patients.MethodsPatients were distinguished with acute or chronic CSC based on focal or diffuse retinal pigment epithelium (RPE) leakage on fundus fluorescein angiography (FFA), with or without widespread RPE decompensation. Patients were categorized into five groups and treated with 577 nm yellow SML according to 50% titration power. The change of best-corrected visual acuity (BCVA) and central macular thickness (CMT) were set as primary outcomes. A linear regression model assessed the correlation between different factors and outcome indicators.ResultsA total of 103 patients with 127 eyes (61 with acute CSC and 66 with chronic CSC) were enrolled. The baseline characteristics were balanced between the five groups (all p &amp;gt; 0.05). The decrease of CMT and the improvement of BCVA were related to the CMT at baseline (all p &amp;lt; 0.05). We found that the lowest effective laser power for acute CSC was 425 mW (−225.50 μm vs. −171.24 μm vs. −114.50 μm vs. −130.54 μm vs. −68.00 μm, p &amp;lt; 0.001), showing a significant CMT reduction at this power, but no significant increase in BCVA (−0.15 ± 0.10 logMAR vs. −0.20 ± 0.16 logMAR vs. −0.14 ± 0.11 logMAR vs. −0.17 ± 0.30 logMAR vs. −0.11 ± 0.14 logMAR, p &amp;gt; 0.05). For chronic CSC, the lowest effective laser power was 375 mW (p = 0.01), the change of CMT was significant in 375 mW (−93.91 ± 109.06 μm, −119.32 ± 105.56 μm, −88.67 ± 67.26 μm, −60.89 ± 106.86 μm, and −99.11 ± 157.32 μm, p = 0.04). The change of BCVA was similar trend (−0.54 ± 0.66 logMAR vs. −0.17 ± 0.23 logMAR vs. −0.10 ± 0.21 logMAR vs. −0.02 ± 0.30 logMAR vs. 0.05 ± 0.19 logMAR, p &amp;lt; 0.001).ConclusionIn this study, our results suggested 425 mW and 375 mW laser power is the lowest effective SML power for treating acute and chronic CSC in Chinese patients respectively, And the power of SML for chronic CSC requires lower power than acute CSC.

Temperature Distribution of Frozen Wall Formed by Irregular Hole Arrangement During In Situ Repair of Underground Shield Machine

In order to study the development law of the irregular hole freezing temperature field, combined with the shield solution project of the Nanjing Water Supply Corridor, the distribution characteristics and influencing factors of the irregular freezing temperature field of the river bottom shield machine are studied by numerical simulation. The following conclusions are obtained: (1) The extension length of the outer ring pipe is correlated approximately positively with the thickness and average temperature of the freezing wall at the bottom of the cup. The thickness increases by 0.25 m, and the average temperature decreases by 1.25 °C for every 1 m increase in the extension length. (2) The intersection time decreases logarithmically with the increase in the extension length of the outer ring tube. (3) As the ratio of the axial angle between the two adjacent tubes in the weak area of the outer ring tube becomes larger, the temperature of the weak point in the center of the two tubes increases approximately linearly. The midpoint temperature of the two tubes increases by 3.3 °C for every 1 increase in the angle coefficient. (4) With the increase in the opening angle of the inner ring hole, the thickness and average temperature change, respectively, at 150 d are not more than 0.15 m and 0.6 °C. The results show that under the irregular freezing form, the angle and length of the outer ring pipe have a great influence on the temperature field, and the angle of the inner ring pipe has little influence on the final distribution of the temperature field. The average temperature and the temperature distribution of the weak points show a trend of decreasing first and then increasing along the shield advancing direction, reaching a minimum near the cutterhead.

Quality evaluation of innovative buttermilk biscuits produced from orange-flesh sweet potato flour infused with coconut

IntroductionThis study was undertaken to evaluate a value-added innovative buttermilk biscuit made from orange flesh sweet potato (OFSP) flour, infused with coconut. It underscores the importance of food utilisation through alternatives to wheat flour contributing to food and nutrition security amidst evolving global challenges. The objectives of this study were: to investigate the effect of different levels of OFSP flour with and without shredded coconut on the physical, microbiological, nutritional and sensory properties of buttermilk biscuits. The hypotheses were: Ho: There is no effect of different levels of OFSP flour and shredded coconut on the physical, microbiological, nutritional and sensory properties on buttermilk biscuits at ∝ = 0.05 and Ha: There is an effect of different levels of OFSP flour and shredded coconut on the physical, microbiological, nutritional and sensory properties on buttermilk biscuits at ∝ = 0.05.MethodsOFSP flour was produced and combined with wheat flour at different ratios and infused with desiccated shredded coconut to produce six formulations of buttermilk biscuits: 100% wheat flour + 5% coconut (control 1), 100% wheat flour (control 2), 70% wheat flour + 30% OFSP flour + 5% coconut, 70% wheat flour + 30% OFSP flour, 50% wheat flour + 50% OFSP flour + 5% coconut and 50% wheat flour + 50% OFSP flour. The study followed a randomised 3 × 2 factorial design where each treatment was replicated four times giving 24 treatments. Physical, nutritional, sensory, microbiological and shelf-life analyses were determined for each buttermilk biscuit treatment.ResultsThe study’s findings revealed that buttermilk biscuits formulated with 30% OFSP flour received the highest (p &amp;lt; 0.05) sensory evaluation scores for the majority of attributes and overall acceptability while the 100% wheat flour formulations received the lowest scores according to the 9-point hedonic scale. Notably, the inclusion of shredded coconut did not improve sensory attributes or overall acceptance of the buttermilk biscuits. The OFSP flour buttermilk biscuits contained protein, fat, fibre, moisture and ash. The 100% wheat flour treatments contained significantly higher levels of proteins and moisture than the OFSP flour buttermilk biscuits. The colour L* of the OFSP flour treatments were significantly lower than the 100% wheat flour treatments. There were no significant changes in spread-ratio, diameter and thickness of the buttermilk biscuits during storage. Furthermore, the microbiological quality was maintained as no growth of bacteria, yeasts and molds were observed.DiscussionThe OFSP flour with and without desiccated coconut produced acceptable buttermilk biscuits with less reliant on wheat flour. It is noteworthy that the protein content of the OFSP flour buttermilk biscuits was at an acceptable level even though it was lower than that in 100% wheat flour buttermilk biscuits. Food safety was maintained throughout storage which is crucial in the elimination of food borne diseases. The use of different baking parameters can be used for future studies to assess the effect of temperature on the quality of buttermilk biscuits.

Intercalation Behavior of a Spiro-bipyrrolidinium Cation into a Graphite Electrode from Dimethyl/Propylene Carbonates.

Quaternary ammonium-graphite intercalation compounds (QA+-GICs) are promising negative electrode materials in dual-carbon batteries by virtue of safety, low cost, and environmental friendliness. However, the intercalation behavior of QA+ into graphite electrodes in mixed solvents has never been reported. Herein, spiro-(1,1')-bipyrrolidinium tetrafluoroborate dissolved in a dimethyl/propylene carbonate (DMC/PC) binary solvent system was employed in graphite/activated carbon (AC) capacitors. The storage behavior of the spiro-(1,1')-bipyrrolidinium cation into graphite is very related to the solvent composition of the electrolyte solutions. In situ X-ray diffraction tests revealed that the graphite electrodes can form different QA+-GICs during cycling, which is a key factor influencing the electrochemical performance of graphite/AC capacitors. Besides, the reversible thickness change of graphite in graphite/AC capacitors with different electrolytes during the charge-discharge process was also addressed. These findings provide sound evidence for the co-intercalation of the solvent with the cation.

Determining the Relationship Between Corneal Stiffening and Tissue Dehydration After Corneal Cross-Linking.

To quantify corneal cross-linking (CXL)-induced stiffening via mechanical testing to estimate the impact of changes in hydration levels (H) and evaluate depth-dependent tissue hydration after CXL. Eighty-three porcine corneal buttons were divided into three groups: Standard protocol CXL (S-CXL), accelerated CXL (A-CXL), and untreated (nonirradiated riboflavin-only) controls. Samples were hydrated or dehydrated to modulate H and dynamic mechanical analyzer compression tests were performed to measure Young's modulus (E). To extract the solid tissue network modulus, the cornea was modeled as a biphasic material after measuring E at different H. Corneal hydration was correlated with depth-dependent tissue thickness characterized by confocal reflection microscopy (CRM). Young's modulus increased fourfold after S-CXL (0.72 ± 0.1 MPa) and threefold after A-CXL E (0.53 ± 0.12 MPa) versus controls (0.17 ± 0.045 MPa). However, H decreased from 4.07 ± 0.35 in controls to 2.06 ± 0.2 after S-CXL and 2.79 ± 0.12 after A-CXL. After H modulation and biphasic mechanical modeling, Young's modulus for corneal solid tissue network showed only a 1.8-fold increase after S-CXL (2.25 MPa) and 1.5-fold increase after A-CXL (1.85 MPa) versus controls (1.22 MPa). With CRM, the overall thickness of the corneal tissue was found to linearly correlate to hydration H as expected. No appreciable depth dependence of hydration-induced thickness changes throughout the corneal buttons were observed. Corneal tissue hydration changes significantly impact measured corneal stiffness after CXL using mechanical testing. Not considering H leads to major overestimation of the stiffening effect of the CXL procedure. Depth-dependence of corneal thickness because of changing hydration is strongly dependent on the integrity of the tissue.

Quercetin Alleviates Scleral Remodeling Through Inhibiting the PERK-EIF2α Axis in Experiment Myopia.

This study aims to investigate the effect of quercetin (QUE) on scleral remodeling by inhibiting the PERK-EIF2α signaling pathway and to evaluate its potential role in slowing myopia. Lens-induced myopia (LIM) guinea pigs were obtained and treated with QUE. After 4 and 6 weeks of treatments, ocular biological measurements were conducted. Hematoxylin and eosin (H&E) staining was used to observe the changes in scleral morphology and thickness, and Masson staining was used to examine scleral collagen fiber arrangement. Quantitative PCR (qPCR) and Western bolt were utilized to detect the mRNA and protein expression of PERK, EIF2α, MMP-2, TIMP-2, and collagen I in the scleral tissues. Calcium ion flow in each group was measured using noninvasive micro-test technology, and reactive oxygen species levels were detected by flow cytometry. Compared with the LIM group, the ocular measurements showed that the refractive errors and axial length of the eyes were significantly reduced in the LIM+QUE group (P < 0.01). H&E and Masson staining showed that sclera in the LIM+QUE group was thickened, collagen was dense, and the fiber gap was reduced. In the LIM+QUE group, the expression levels of PERK, EIF2α, and MMP-2 were decreased, whereas the expression levels of TIMP-2 and collagen I were increased. Calcium release and reactive oxygen species (ROS) in the LIM+QUE group were decreased. Quercetin ameliorates scleral remodeling in myopic guinea pigs by inhibiting the PERK-EIF2α signaling pathway, thereby alleviating the progression of myopia. These findings provide new experimental evidence for the potential application of quercetin in myopia prevention and treatment.

Molecular mechanisms of iron nanominerals formation in fungal extracellular polymeric substances (EPS) layers during fungus-mineral interactions

Extracellular polymeric substances (EPS), which envelop on fungal hyphae surface, interact strongly with minerals and play a crucial role in the formation of nanoscale minerals during biomineralization in nature environments. However, it remains poorly understood about the molecular mechanisms of nanominerals (i.e., iron nanominerals) formation in fungal EPS halos during fungus-mineral interactions. This process is vital because fungi typically grow attached to various mineral surfaces in nature. According to the changes of thickness of the fungal cell and EPS layers during the Trichoderma guizhouense NJAU 4742 and hematite cultivation experiments, we found that fungal biomineralization could trigger the formation of EPS layers. Fe-dominated nanominerals, aromatic C (283-286.1 eV), alkyl C (287.6-288.3 eV), and carboxylic C (288.4-289.1 eV) were the dominant chemical groups on the EPS layers, as determined by nanoscale secondary ion mass spectrometry (NanoSIMS), high-resolution transmission electron microscope (HRTEM), and carbon 1s near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Further, evidence from Fe K-edge X-ray absorption near-edge structure (XANES) and X-ray photoelectron spectroscopy (XPS) spectra indicated that oxygen vacancy (OV) was formed on the Fe-dominated nanomineral surface during fungus-mineral interactions, which played an important role in catalyzing H2O2 decomposition and HO∗ production. Taken together, the intrinsic peroxidase-like activity by reactive oxygen species (ROS) could modulate the Fe-dominated nanominerals formation in EPS layers to newly form a physical barrier between the cell and the external environments around hyphae, providing novel insights into the effects of ROS-mediated fungal-mineral interactions on fungal nutrient recycling, attenuation of contaminants, and biological control in nature environments.