Changes In pH Values Research Articles

Carbon dots-based fluorescent films to act as a potential antioxidant agent and pH ratiometric sensor for skin applications

The wound healing process is accompanied by changes in pH values. Monitoring this physicochemical parameter can indicate the effectiveness of the applied treatment and act as early identification of wound infection. This study focuses on the development of a fluorescent film-based polyvinyl alcohol (PVA) and carbon dots (CDs) derived from lemon bagasse (CD-L) and ortho-phenylenediamine (CD-oPD) named to act as antioxidants and potential ratiometric fluorescent pH sensors, in wound applications. The I460/I550 intensity ratio, as a function of pH value for the dual-system CDs prepared from the mixture of CD-L and CD-oPD, named CD-L/oPD, was investigated. The fit corresponded to a sigmoidal function in the pH range of 5–10, with a relationship having a r2 = 0.992. The variation in the values of the I460/I550 ratio allows for the visualization of the color change from yellowish-green to green with increasing pH. Through a simulated ex vivo pig skin model, it was possible to note that the films prepared from mixed of the CD-L and CD-oPD carbon dots incorporated in a matrix PVA named CD-L/oPD-F was more efficient at visually discriminating color in relation to changes in pH than the films prepared from both individual CD-L (CD-L-F) and CD-oPD (CD-oPD-F) carbon dots. CD-L and CD-oPD demonstrated antioxidant capacity against reactive oxygen species (ROS). The IC50 values for CD-L and CD-oPD were 56.7 and 39.5 μg mL−1 in the DPPH● inhibition assay, and 25.1 and 63.4 μg mL−1 in the HOCl scavenging one, respectively. MTT viability assays using human non-tumoral skin fibroblast (HFF-1) cell showed a cell survival rate of over 80% for both CDs up to a concentration of 1,000 μg mL−1. Finally, the developed films can act in a bifunctional way, by monitoring healing through pH changes and by acting as an antioxidant agent in the treatment of wounds.

Re-evaluating fetal scalp pH thresholds: An examination of fetal pH variations during labor.

Since the 1970s, fetal scalp blood sampling (FSBS) has been used as a second-line test of the acid-base status of the fetus to evaluate fetal well-being during labor. The commonly employed thresholds that delineate normal pH (>7.25), subnormal (7.20-7.25), and pathological pH (<7.20) guide clinical decisions. However, these experienced-based thresholds, based on observations and common sense, have yet to be confirmed. The aim of the study was to investigate if pH drop rate accelerates at the common thresholds (7.25 and 7.20) and to explore the possibility of identifying more accurate thresholds. A retrospective study was conducted at a tertiary maternity hospital between June 2017 and July 2021. Patients with at least one FSBS during labor for category II fetal heart rate and delivery of a singleton cephalic infant were included. The rate of change in pH value between consecutive samples for each patient was calculated and plotted as a function of pH value. Linear regression models were used to model the evolution of the pH drop rate estimating slope and standard errors across predefined pH intervals. Exploration of alternative pH action thresholds was conducted. To explore the independence of the association between pH value and pH drop rate, multiple linear regression adjusted on age, body mass index, parity, oxytocin stimulation and suspected small for gestational age was performed. We included 2047 patients with at least one FSBS (total FSBS 3467); with 2047 umbilical cord blood pH, and a total of 5514 pH samples. Median pH values were 7.29 1 h before delivery, 7.26 30 min before delivery. The pH drop was slow between 7.40 and 7.30, then became more pronounced, with median rates of 0.0005 units/min at 7.25 and 0.0013 units/min at 7.20. Out of the alternative pH thresholds, 7.26 and 7.20 demonstrated the best alignment with our dataset. Multiple linear regression revealed that only pH value was significantly associated to the rate of pH change. Our study confirms the validity and reliability of current guideline thresholds for fetal scalp pH in category II fetal heart rate.

Suppressing Rampant and Vertical Deposition of Cathode Intermediate Product via PH Regulation Toward Large-Capacity and High-Durability Zn//MnO2 Batteries.

Despite great prospects, Zn//MnO2 batteries suffer from rampant and vertical deposition of zinc sulfate hydroxide (ZSH) at the cathode surface, which leads to a significant impact on their electrochemical performance. This phenomenon is primarily due to the drastic increase in the electrolyte pH value upon discharging, which is closely associated with the electrodissolution of Mn-based active materials. Herein, the pH value change is effectively inhibited by employing an electrolyte additive with excellent pH buffering capability. As such, the formation of ZSH at the cathode is postponed, resulting in the deposition of ZSH in a horizontal arrangement. This strategy can significantly enhance the utilization efficiency of cathode active material, while also enabling a solid electrolyte interphase layer at the Zn anode to address low Zn stripping/plating reversibility. With the optimal electrolyte, the Zn//MnO2 battery realizes a 25.6% increase in the specific capacity at 0.2 A g-1 compared to that with the baseline electrolyte, great rate capability (161.6 mAh g-1 at 5 A g-1 ), and superior capacity retention (90.2% over 5,000 cycles). In addition, the pH buffering strategy is highly applicable in hydrogel electrolytes. This work underscores the importance of pH regulation for Zn//MnO2 batteries and provides enlightening insights.

Electrokinetic and Microstructural Peculiarities of the Portland Cement Hydration with Microadditives

AbstractThe results of given studies included a comparison of changes in temperature, redox potential, OH‐ions concentration and pH values in the Portland cement‐water‐additive system depending on the hydration time and features of hydration processes in the microstructure of the cement stone. The studied additives were selected taking into account the prospects for their use in the complex modifiers compositions for cement‐containing building materials. The results of electrokinetic measurements are presented and regularities and features of the influence of each studied additives on the processes of hydration structure and phase formation in Portland cement paste in the early stages of hardening are determined. The microstructure and fracture surfaces of cement stone samples formed during cement paste hardening with the optimal content of additives and features of hydration processes of cement stone were studied. The features of the mutual arrangement of individual phases in crystalline hydrate aggregates of cement stone, as well as the nature of the porosity of its microstructure, were investigated.

Physical and Chemical Components Characteristics of Liquid Smoke Redistillation from Different Biomass Sources

In this study, liquid smoke from coconut shells, sengon wood, and corn cobs has been produced and redistilled. The change of colour, pH value, and chemical components of liquid smoke (LS) and redistilled liquid smoke (r-LS) have been studied. Redistillation was carried out at about 100–105 °C for 3 hours. The results show that the colour of r-LS from the three biomass sources is lighter than LS. The pH values slightly decreased for coconut shell, sengon wood, and corn cobs, from 3.63 to 3.40, 4.42 to 3.39, and 3.53 to 3.36, respectively. This result is caused by the evaporation of volatile compounds. Meanwhile, the results of the analysis of the chemical components showed that all the main components of liquid smoke decreased after redistillation, except for the esters component, which increased in coconut shell and corn cobs, from 2.98% to 64.36% and 2.98% to 8.07%, respectively.

Effect of plant extracts on some quality parameters of canned mixed sweet corn-red bean

The leading export product of Hungary is canned sweetcorn, which is available in single-component or blended varieties with a focus on colour retention, for wich the food industry mainly uses ascorbic acid and EDTA in the brine of canned vegetable. Thoughtful customer behavior is pushing the food industry to switch to natural plant extracts instead of synthetic additives. In order to investigate if acerola plant extract is suitable as a replacement for ascorbic acid, we investigated the potential uses of two varieties of acerola extract in three different concentrations in the case of canned mixed sweet corn and red bean. After production, and after 1 week of thermostating at 55°C and storage at room temperature for 4 and 8 weeks, the changes in pH value, salt concentration, water-soluble dry matter content, colour, total polyphenol content, and antioxidant capacity of the brine were all evaluated in this experiment. The results showed that both acerola extracts were promising in fixing the colour, with the higher application of the first extract and the lowest and highest dosage of the second extract showing the best results. During storage, the polyphenol content and antioxidant capacity of some samples decreased slightly compared to their initial values.

Effects of forest fire smoke deposition on soil physico-chemical properties and bacterial community

The number of forest fires has increased globally, together with considerable smoke emission that significantly impacts the atmospheric environment and associated ecosystems. Most current studies have focused on the in situ effects of fire on the forest ecosystem. However, the mechanisms by which smoke particles affect adjacent ecosystems are largely unexplored. In this study, a simulated forest fire combustion system was developed to evaluate the effect of different smoke concentrations (control, low and high) on soil physico-chemical properties of adjacent farmland at two soil depths. The abundance and diversity of bacterial community were also determined. The results showed that smoke deposition increased the contents of total carbon (TC), total nitrogen (TN), and total phosphorus (TP) in the 0–10 cm soil layer; however, no significant changes in soil water content (SWC) and pH values was observed. The ACE(Abundance Coverage-based Fastimator) and Chao1 diversity indices of bacterial community generally showed a downward trend whereas the PD_whole_ tree diversity index increased after 180 d of smoke deposition. The relative abundance of Proteobacteria remained stable, while abundance of Firmicutes in soil decreased after 180 d of smoke deposition. Smoke deposition slightly affected the physical and chemical properties of the 10–20 cm soil, but the range of variation of the relative abundance and diversity dominant bacteria exceeded that of the 0–10 cm soil. A significant positive correlation was found between the soil properties and the alpha diversity indices during the first 30 d after smoke deposition; the correlation then decreased gradually. Redundancy analysis revealed that Proteobacteria, Firmicutes, and Actinobacteria were generally positively correlated with TC, TN, and SWC. As a whole, the study reveals that the effects of smoke deposition on soil physico-chemical properties and bacterial community depends on smoke concentration where relatively low concentration appears to be beneficial to soil bacterial community.

Changes in pH Values Allow for a Visible Detection of the End Point in Submerged Liquid Biodetoxification during Biorefinery Processing

Changes in pH Values Allow for a Visible Detection of the End Point in Submerged Liquid Biodetoxification during Biorefinery Processing

Unveiling the Potential of Bacillus safensis Y246 for Enhanced Suppression of Rhizoctonia solani.

Rhizoctonia solani is a significant pathogen affecting various crops, including tobacco. In this study, a bacterial strain, namely Y246, was isolated from the soil of healthy plants and exhibited high antifungal activity. Based on morphological identification and DNA sequencing, this bacterial strain was identified as Bacillus safensis. The aim of this investigation was to explore the antifungal potential of strain Y246, to test the antifungal stability of Y246 by adjusting different cultivation conditions, and to utilize gas chromatography-mass spectrometry (GC-MS) to predict the volatile compounds related to antifungal activity in Y246. In vitro assays demonstrated that strain Y246 exhibited a high fungal inhibition rate of 76.3%. The fermentation broth and suspension of strain Y246 inhibited the mycelial growth of R. solani by 66.59% and 63.75%, respectively. Interestingly, treatment with volatile compounds derived from the fermentation broth of strain Y246 resulted in abnormal mycelial growth of R. solani. Scanning electron microscopy analysis revealed bent and deformed mycelium structures with a rough surface. Furthermore, the stability of antifungal activity of the fermentation broth of strain Y246 was assessed. Changes in temperature, pH value, and UV irradiation time had minimal impact on the antifungal activity, indicating the stability of the antifungal activity of strain Y246. A GC-MS analysis of the volatile organic compounds (VOCs) produced by strain Y246 identified a total of 34 compounds with inhibitory effects against different fungi. Notably, the strain demonstrated broad-spectrum activity, exhibiting varying degrees of inhibition against seven pathogens (Alternaria alternata, Phomopsis. sp., Gloeosporium musarum, Dwiroopa punicae, Colletotrichum karstii, Botryosphaeria auasmontanum, and Botrytis cinerea). In our extensive experiments, strain Y246 not only exhibited strong inhibition against R. solani but also demonstrated remarkable inhibitory effects on A. alternata-induced tobacco brown spot and kiwifruit black spot, with impressive inhibition rates of 62.96% and 46.23%, respectively. Overall, these findings highlight the significant antifungal activity of B. safensis Y246 against R. solani. In addition, Y246 has an excellent antifungal stability, with an inhibition rate > 30% under different treatments (temperature, pH, UV). The results showed that the VOCs of strain Y246 had a strong inhibitory effect on the colony growth of R. solani, and the volatile substances produced by strain Y246 had an inhibitory effect on R. solani at rate of 70.19%. Based on these results, we can conclude that Y246 inhibits the normal growth of R. solani. These findings can provide valuable insights for developing sustainable agricultural strategies.

Wetting-drying effect on the strength and microstructure of cement-phosphogypsum stabilized soils

Phosphogypsum has often been used as an effective and environmentally friendly binder for partial replacement of cement, improving the engineering properties of slurries with high water content. However, the influence of phosphogypsum on the physicomechnical properties of stabilized soil subjected to wetting–drying cycles is not well understood to date. In this study, the effect of phosphogypsum on the durability of stabilized soil was studied by conducting a series of laboratory experiments, illustrating the changes in mass loss, pH value and unconfined compressive strength (qu) with wetting-drying cycles. The test results showed that the presence of phosphogypsum significantly restrained the mass loss in the early stage (lower than the 4th cycle), which in turn led to a higher qu of stabilized soil than that without phosphogypsum. After the 4th cycle, a sudden increase in mass loss was observed for stabilized soil with phosphogypsum, resulting in a significant drop in qu to a value lower than those without phosphogypsum at the 6th cycle. In addition, the qu of stabilized soils correlated well with the measured soil pH irrespective of phosphogypsum content for all wetting–drying tests. According to the microstructure observation via scanning electron microscope (SEM) and X-ray diffraction (XRD) tests, the mechanisms relating the sudden loss of qu for the stabilized soils with phosphogypsum after the 4th wetting-drying cycle are summarized as follows: (i) the disappearance of ettringite weakening the cementation bonding effect, (ii) the generation of a larger extent of microcrack, and (iii) a lower pH value, in comparison with the stabilized soil without phosphogypsum.

Hybrid Polymer–Inorganic Coatings Enriched with Carbon Nanotubes on Ti-6Al-4V Alloy for Biomedical Applications

Bone tissue degeneration, caused by disease as well as trauma, is a problem affecting many social groups in the 21st century. It involves pain and reduced patient comfort. Developments in materials engineering allow for the design of novel, innovative materials that can be used in therapies to promote bone regeneration. This work presents the preparation of a ceramic–polymer coating modified with carbon nanotubes on a titanium alloy for biomedical applications. The ceramic part is hydroxyapatite synthesized by the wet precipitation method using orthophosphate and calcium hydroxide. The polymer of choice was polyethylene glycol. A UV light synthesis method was successfully applied to obtain coatings characterized by continuity and full crosslinking. Extensive physicochemical analysis and incubation studies were carried out. Interactions between coatings and fluids mimicking artificial biological environments were analyzed for 9 days, i.e., in fluids such as SBF solution, artificial saliva, and distilled water. During the in vitro incubation, changes in pH values were measured by potentiometric tests, and ionic conductivity was measured by analyzing conductometry. After incubation, the surface morphology was studied by scanning electron microscopy (SEM) together with energy-dispersive (EDS) microanalysis, which made it possible to determine the presence of individual elements on the surface, as well as to observe the appearance of new apatite layers. Fourier-transform infrared (FT-IR) spectrometry was also performed before and at the end of the incubation period. On the basis of the presented studies, it was concluded that coatings that contain nanotubes are bioactive and do not negatively affect the properties of the coatings. Bioactivity was confirmed microscopically by observing new apatite layers after incubation in SBF, which were identified as phosphorus and calcium deposits. Degradation of the polymer phase was observed in the artificial saliva. These materials require further study, including safety analysis, but they demonstrate potential for further work.

Study on the Reverse Flotation Separation of Smithsonite from Dolomite Using the Saponified 2-(4,4-Dimethylpentan-2-yl)-5,7,7-trimethyloctanoic Acid as a Collector

Dolomite, a prominent calcium-bearing gangue mineral found in carbonate-type zinc oxide ores, poses a significant challenge for effective flotation separation alongside smithsonite due to their highly similar surface properties. The present study explores the potential of 2-(4,4-dimethylpentan-2-yl)-5,7,7-trimethyloctanoic acid (2-DMPT) as a collector for the reverse flotation of smithsonite from dolomite. Micro-flotation experiments indicated that saponified 2-DMPT exhibited superior collecting ability and selectivity for dolomite over smithsonite under highly alkaline conditions. Specifically, the flotation recovery of dolomite reached 62%, whereas only 6% of smithsonite was recovered in the flotation foam products. Zeta potential and attenuated total reflectance–Fourier transform infrared (ATR-FTIR) analysis revealed that changes in pH values had minimal influence on the collector’s adsorption onto dolomite, while significantly hindering its adsorption on the smithsonite surface. Furthermore, X-ray photoelectron spectroscopy (XPS) analysis showed that 2-DMPT could form hydrophobic complexes with the active Ca2+ sites on the dolomite surface at pH 11.5. However, the interaction between smithsonite and carboxylic groups of 2-DMPT under the same conditions was relatively weaker, facilitating their reverse flotation separation. As a result, 2-DMPT shows promise as a potential collector for the reverse flotation process, effectively removing dolomite from smithsonite and reducing acid consumption in subsequent acid-leaching processes.

Controlling Metal-Oxide Reducibility for Efficient C-H Bond Activation in Hydrocarbons.

Knowing the structure of catalytically active species/phases and providing methods for their purposeful generation are two prerequisites for the design of catalysts with desired performance. Herein, we introduce a simple method for precise preparation of supported/bulk catalysts. It utilizes the ability of metal oxides to dissolve and to simultaneously precipitate during their treatment in an aqueous ammonia solution. Applying this method for a conventional VOx -Al2 O3 catalyst, the concentration of coordinatively unsaturated Al sites was tuned simply by changing the pH value of the solution. These sites affect the strength of V-O-Al bonds of isolated VOx species and thus the reducibility of the latter. This method is also applicable for controlling the reducibility of bulk catalysts as demonstrated for a CeO2 -ZrO2 -Al2 O3 system. The application potential of the developed catalysts was confirmed in the oxidative dehydrogenation of ethylbenzene to styrene with CO2 and in the non-oxidative propane dehydrogenation to propene. Our approach is extendable to the preparation of any metal oxide catalysts dissolvable in an ammonia solution.

Mechanism study on the effect of diammonium hydrogen phosphate on the setting time and micro-nanostructure of ordinary Portland cement paste

The effect of diammonium hydrogen phosphate (DAP) on the setting time, mechanical properties and micro-nanostructure of cement paste is investigated. The results show that with an increase in DAP content, the peak value of hydration heat of cement is delayed, but the 3d cumulative hydration heat release of the cement is basically the same. The 3d compressive strength of cement paste is not significantly different, and the 28d compressive strength increases first and then decreases. When the DAP content is 0.5 wt%, the compressive strength of cement paste is most significantly improved, increasing by 38.5%. Meanwhile, the initial and final setting times of cement paste are extended by 74.0% and 73.2%, respectively. When the DAP content is 1.0 wt%, the cement paste has the longest setting time, with the initial and final setting times extended by 101.8% and 103.5%, respectively. However, the compressive strength of the cement paste can still be improved by 10.5%. It is mainly due to the change of pH value and calcium ion concentration of cement pore solution with different DAP content, which changes the micro-nanoscale morphology of C-S-H gel, Hamaker constant between globules, microscopic Young's modulus, and pore structure.

Culture condition optimization of naturally lacto-fermented cucumbers based on changes in detrimental and functional ingredients.

A two-step trial was used to optimize the culture condition of naturally lacto-fermented cucumbers. In the first trial, changes in pH values and total biogenic amines were measured to optimize the pickling juice formula. A 15% crystal sugar solution with low-salt brine at 4°C was proved to be the best formula. In the second trial, pH values, organic acids, total phenolics, flavonoids, saponins and free amino acids, as well as biogenic amines and nitrites under the optimal pickling formula were measured. The optimal fermentation day was suggested at around 8days. During the cucumber's fermentation process, the pH value was quickly lowered to <4.6. Meanwhile, the functional ingredients increased significantly. In contrast, total biogenic amines and nitrites did not exceed the risk limit, evidencing the safety and functional characteristics for the naturally lacto-fermented cucumbers. The two-step trial has evidenced the possibility to develop desirable lacto-fermented cucumbers.

Retention properties and mechanism of agricultural waste maize whisker on atmospheric mercury

Mercury (Hg) is a global pollutant transmitted mainly through the atmosphere, posing a serious threat to biological survival and human health. Porous materials, with high specific surface area, high porosity, and high adsorption, are particularly suitable for the purification of atmospheric Hg mixtures. However, plant porous materials are rarely directly used for atmospheric Hg purification. In this study, the properties and mechanism of maize whisker in removing atmospheric Hg were analyzed. The results show that the Hg content in the whiskers increases significantly as the initial Hg concentration increases, and 79.38% Hg can be removed by 0.2 g maize whiskers after 1 h exposure when the initial Hg concentration is 0.1 μg m−3, indicating that maize whiskers can accumulate atmospheric Hg rapidly and effectively. The hole diameter of the maize whisker is between 0.83 and 3.06 μm, which is suitable for the adsorption of small substances. Correlation analysis shows that maize whiskers have a significant correlation between atmospheric Hg retention and its specific surface area, pore size, medium pore ratio, and micropore ratio, suggesting that the maize whisker hole feature has a significant influence on its ability to retain atmospheric Hg. Compared with the energy profiles before and after Hg treatment, the peak of Mg decreased after Hg adsorption. Fourier infrared spectrometer analysis suggests that functional groups such as -OH, -COOH, and -O- are involved in the adsorption process. The change in pH value shows an obvious effect on the overall change in zeta potential in the adsorption process. Therefore, a variety of mechanisms, including physical adsorption, electrostatic adsorption, complexation, chelation, and ion exchange, are involved in Hg retention with the maize whisker. This study reveals the important potential value of agricultural waste maize whiskers in the purification of atmospheric heavy metal Hg.Graphical

Failure mechanisms of nitrogen-doped diamond-like carbon films: Exfoliation or localized attack behaviour of films under hydrochemistry evolution

Nitrogen-doped diamond-like carbon (N-DLC) films with different nitrogen content were prepared on the surface of 2024 aluminium alloy using plasma-enhanced chemical vapour deposition technology. The failure mechanisms of the N-DLC films during seawater exposure have been investigated. The results demonstrated that nitrogen doping significantly affected the failure behaviour of the DLC films in seawater. Extensive exfoliation of the DLC film was found without the addition of nitrogen. However, when the nitrogen flow rate is 10 sccm and 15 sccm, significant localized corrosion of the DLC film and the aluminium alloy substrate occurred. The difference in the thermodynamic process of corrosion of the N-DLC films was mainly due to the changes in pH value on the local solution caused by the formation and hydrolysis of NH4+. In the DLC film without nitrogen additive, large oxide particles were formed at the film-substrate interface due to the acidification of the solution. Meanwhile, the internal stress of the DLC film was high under this condition. The film was easily exfoliated and ultimately lost its protective effect on the substrate. The corrosion products could not grow sustainably due to the variable pH value when excess nitrogen was added to the DLC film. No extensive exfoliation of the DLC films with 10 sccm and 15 sccm nitrogen addition has occurred, but obvious corrosion channels were formed in the substrate because of the localized corrosion. The evolution mechanism of oxidation behaviour in the presence of variations in local hydrochemistry is also discussed.

Enhancing the oxidative stability, physicochemical and sensory quality of deep-fat fried chicken nuggets using thyme essential oil-loaded oleogel coatings

Deep-fat fried foods are a popular choice in the United States, known for their delicious taste and affordability. However, they often absorb excessive amounts of oil during frying, leading to accelerated lipid oxidation and reduced shelf life. This study introduced an innovative approach by developing edible coatings from oleogels (OGC) loaded with thyme essential oil (TEO) at varying concentrations (0 %, 0.5 %, 1 %, and 2 % v/v). Uncoated samples were also included as controls to assess the effect of the coating on chicken nuggets. The aim was to explore their effectiveness in enhancing the physicochemical properties and sensory attributes of deep-fat fried chicken nuggets. Results indicated that the incorporation of TEO effectively reduced coating pickup in coated samples. Furthermore, these oleogel-based coatings significantly minimized moisture loss and fat uptake in chicken nuggets, improving both lightness (L*) and a* values without significant changes in pH values or textural parameters. Most notably, increasing TEO concentration led to a remarkable two-fold reduction in peroxide values compared to the control. Importantly, sensory analysis revealed that the addition of TEO to the coating does not compromise the overall sensory quality of the fried products. This study suggests promising future applications of OGC and TEO blends in mitigating quality degradation in deep-fat fried foods. These findings hold great potential for the food industry, offering a pathway to healthier, longer-lasting fried products with enhanced sensory appeal.

Effect of carbonation curing on the physical, mechanical, and microstructural properties of metakaolin-based geopolymer concrete

Carbonation curing can absorb CO2 and fix it as a carbonate mineral in cementitious materials. Carbonation curing in Portland cement-based materials has been widely discussed in the literature, unlike carbonation curing in geopolymers. Therefore, the objective of this article was to evaluate the effect of carbonation curing on the physical, mechanical, and microstructural properties of metakaolin-based geopolymer concrete. Changes in pH value, carbonation depth, CO2 absorption, compressive strength, and microstructure formation were determined before and after carbonation curing. The results showed that the carbonation depth of Portland cement concrete is similar to the carbonation depth of geopolymer concrete. Furthermore, compressive strength after post-conditioning was not affected by carbonation curing, remaining statistically equal to reference concrete. Also, the formation of carbonates (Na2CO3 and CaCO3) refined the pore structure and increased closed pores, reducing the void ratio and the water absorption (permeability properties). A hybrid system containing N-A-S-(H) gel and carbonate crystals was identified.

The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium.

Strontium (Sr) is a trace element in the human body that can promote bone formation and inhibit bone absorption. A conversion coating of strontium phosphate (Sr-P) on the surface of titanium (Ti) can improve its biological properties and has many potential applications in the fields of dentistry and orthopedics. In the present study, Sr-P coatings with SrHPO4 and Sr3(PO4)2 crystals on Ti are prepared by a phosphate chemical conversion (PCC) treatment and the effect of pH values on the properties of the Sr-P coatings is researched. The results prove that the phase composition, morphology, and corrosion resistance of the coated Ti vary according to the pH values of the PCC solution. The morphology of the conversion deposition on Ti changes from plat-like to cluster-like and then to homogeneous microcrystals as the pH value changes from 2.50 to 3.25. Only discrete SrHPO4 crystals are generated on the substrate at lower pH values, while relatively stable Sr3(PO4)2 and SrHPO4 crystals grow and subsequently form an integrated coating on the Ti as the pH exceeds 2.50. The cross-sectional morphologies and bonding strength of different coatings are also researched. The corrosion resistance of coated Ti improves compared with that of bare Ti because of the Sr-P coatings with a Sr3(PO4)2 phase. In addition, it is indicated that the Sr-P coatings on Ti can improve the adhesion and differentiation of BMSCs.