Changes In Conductivity Research Articles

A-257 Revolutionizing Fungal Infection Diagnosis: A Sensitive, Cost-Effective, and Time-Efficient Solution

Abstract Background Fungal infection detection is essential for optimizing therapeutic strategies, preventing complications, enhancing overall health, and alleviating the financial burden, and preventing transmission. According to the CDC, fungal illness resulted in 75,000 hospital admissions and 9 million outpatient visits annually, with 7,199 deaths predicted in the United States in 2021. The rising prevalence of fungal infections, influenced by factors such as population expansion and evolving treatment strategies poses a growing challenge to achieving an early and accurate diagnosis. There is the crucial need for improved detection methods to promptly identify various fungal infections, including Candida species, spanning from skin issues to potentially fatal systemic diseases, ultimately reducing associated morbidity and mortality. Severe and profound infections with life-threatening potential are common in individuals with compromised immune systems and those who are hospitalized. This risk is notably elevated among patients with organ transplants, immunosuppressive treatments, diabetes, recent broad-spectrum antibiotic usage, catheter utilization, and extended hospitalization periods. Our advancement seeks to introduce innovative methods leveraging carbon-based nanomaterials for the detection of fungal infections, offering distinct advantages including cost-effectiveness, ease of operation, and time efficiency compared to conventional techniques. Methods Our technology utilizes carbon-based nano materials, a promising advancement in nanotechnology to detect fungal infections, especially Candida manifestations. The samples are brought into contact with pre-probed carbon-based nano materials sensors maintained at a specific annealing temperature, facilitating nucleic acid hybridization. Subsequently, alterations in the carbon nanotube's electrical signal are observed, indicating a change in conductivity. This change can allow for the measurement of a voltage difference across a continuous flow of electricity, correlating with the concentration of targets present in the sample, thereby enabling the detection of specific microorganisms. No change was noticed in electrical properties of carbon-based nano material when negative experiments were conducted. Results The initial findings showed the presence of specific microorganisms within the sample in less than 15 minutes with carbon-based nano materials sensors. Comparative analysis of the electrical signal magnitude values obtained from carbon nanotube measurements against the corresponding CT values from quantitative PCR (qPCR) provides insights into the correlation between the electrical readouts and molecular quantification, offering a comprehensive evaluation of the nanotube-based detection system's performance in diagnostics procedure. Conclusions Unlike conventional blood culture and qPCR, our technology, delivers outcomes with heightened sensitivity, cost-effectiveness, and time efficiency. Our team's uncomplicated sample collection method notably reduces the intricacies of sample preparation, enabling the proper disposal of both the sample container and sensor part without requiring disassembly. Enhanced sensitivity, coupled with the economical and rapid detection capabilities of advanced technologies like carbon-based nano materials, is a promising alternative for the accurate and efficient diagnosis of fungal infections. Consequently, the implementation of such technology not only enhances diagnostic efficiency but also contributes to better patient outcomes through prompt and targeted therapeutic interventions.

In-plane electrical conductivity of PEDOT:PSS/Halloysite composite thin films

PEDOT:PSS has found numerous applications in the field of advanced materials, especially in the development of organic electronics. Embedding nanoparticles into the polymer matrix has emerged as an effective strategy to modify the properties of PEDOT:PSS and develop advanced functional composites. Over the past decade, Halloysite nanotubes (HNT) have garnered significant interest and utility as nanofillers and/or templates due to their unique physical-chemical properties, small size, relatively low cost, and large availability. Interestingly, pairing PEDOT:PSS with non-conductive HNT has been demonstrated to enhance the charge transport properties of the composite film. Our discoveries show how the HNT can act as scaffolding for PEDOT:PSS by improving the local ordering of PEDOT chains and enabling the formation of conductive pathways. Consequently, the mechanism responsible for the observed changes in conductivity and the correlation between PEDOT:PSS and insulating nanofillers (HNT) could be different to that previously proposed. Hence, in this work it was observed that PEDOT:PSS/HNT composite films exhibited a non-linear conductivity dependence as a function of the HNT loading. From thermogravimetric analysis, infrared and UV-Vis-NIR spectroscopies, as well as impedance spectroscopy, a more complex interaction between the polymer chains and the nanotubes is revealed. Our study includes the modification of the interaction between the PEDOT chains and the nanofillers by using the secondary doping effect and functionalization of the nanotubes, which confirms our findings. These results represent a significant progress toward a deeper understanding of the emergence of a conductive polymer network on the nanofiller surface, leading to improvements in the electrical conductivity in the composite material.

Thermoelectric and electrical transport properties of mixed-conducting multicomponent oxides based on Ba(Zr,Ce)O3-δ

In this work, the chosen physicochemical properties of single-phase multicomponent oxides BaTi1/8Fe1/8Co1/8Y1/8Zr1/8Sn1/8Ce1/8Hf1/8O3-δ and BaTi1/9Fe1/9Co1/9Y1/9Zr1/9Sn1/9Ce1/9Hf1/9Bi1/9O3-δ were studied. The microstructure of the compounds strongly depended on the presence of bismuth in the structure. The electrical transport studies showed a level of electrical conductivity of ∼10-3 - 10-2 S/cm in the temperature range 673 – 1073 K. Electrical conductivity was thermally activated and the dominant conduction mechanism was the hopping of small polarons. Moreover, total electrical conductivity changes in the dry and humidified atmosphere at lower temperatures due to the presence of protonic defects in the structure. Thermoelectric measurements showed a relatively high value of the Seebeck coefficient for studied ceramics. Its values ranged between 50 and 250 μV/K depending on the sample and temperature. The Seebeck coefficient sign was positive, meaning that electron holes and/or oxygen vacancies were predominant charge carriers in oxidising atmospheres. Additionally, the Seebeck coefficient was found to be different in the humidified atmosphere which indicates an influence of protonic defects on thermoelectric transport. The obtained power factor Pf turned out to be low and dependent on the presence of protonic defects in the structure. This indicates, that the efficiency of the MOs-based operating thermoelectric generators can be controlled by changing the partial pressure of water vapor.

A Janus WSi2P2As2 monolayer: A promising material for detecting NO2 with excellent sensitivity, selectivity, reversibility, and humidity resistance

Realizing highly sensitive, selective, humidity-resistant, and reversible detection of hazardous gas molecules with low detection limit in the air environment at room temperature is essential. Herein, we predict a novel two-dimensional Janus WSi2P2As2 material and propose a NO2 gas sensor with excellent response, selectivity, humidity resistance, and reversibility based on WSi2P2As2, by employing density functional theory, statistical thermodynamic modeling, and the non-equilibrium Green’s function approach. The Janus WSi2P2As2 monolayer is a stable semiconductor with a direct band gap of 0.85 eV and an intrinsic out-of-plane dipole moment. We study the sensing properties of the Janus WSi2P2As2 monolayer towards several typical toxic gases (NO, NO2, NH3, SO2, and H2S). All the gas molecules are physically adsorbed on the surface. Different adsorption energies and electronic structures are found for the top- and bottom-surface adsorptions due to the intrinsic dipole of the Janus WSi2P2As2. The experimental viability is characterized by the adsorption density and the recovery time. The statistical estimation of the adsorption density shows that the oxide gases can be adsorbed practically even at ultra-low concentration of part per billion (ppb) at room temperature. The rapid natural desorption of these toxic gases at 300 K indicates the recyclability of the WSi2P2As2 material. Furthermore, we evaluate the sensing performance of the WSi2P2As2-based gas sensor by the conductance change. The sensor exhibits ultra-response of 374 % and excellent selectivity towards NO2 molecules. Importantly, the sensor remains operating with high performance in the humid environment and air environment. These results demonstrate that the Janus WSi2P2As2 is a promising gas-sensing material for the NO2 detection.

Examining the Mid to Long‐Term Variability in Saturated Hydraulic Conductivity of Sandy Soils and Its Influencing Factors Under Constant Head Test in the Laboratory

AbstractSaturated hydraulic conductivity (Ks) is a crucial parameter that influences water flow in saturated soils, with applications in various fields such as surface water runoff, soil erosion, drainage, and solute transport. However, accurate determination of Ks is challenging due to temporal and spatial uncertainties. This study addresses the knowledge gap regarding the long‐term behavior of Ks in sandy soils with less than 10% fine particles. The research investigates the changes in Ks over a long period of constant head tests and examines the factors influencing its variation. Two sandy samples were tested using a hydraulic conductivity cell, and the hydraulic head and discharge were recorded for over 50 days. The results show a general decline in Ks throughout the test, except for brief periods of increase. At the end of both tests, there are noticeable reductions in the saturated hydraulic conductivities of the samples, with one sample being 96% and the other sample 91% less than the maximum recorded saturated hydraulic conductivity during the tests. Furthermore, the relationship between flow rate and hydraulic head gradient does not follow the expected linear correlation from Darcy's law, highlighting the complex nature of sandy soil saturated hydraulic conductivity. The investigation of soil properties in three different sections of the samples before and after the tests revealed a decrease in the percentage of fine particles and a shift in specific gravity from the bottom to the top of the sample, suggesting particle migration along the flow direction. Factors such as clogging by fine particles and pore pressure variation contribute to the changes in Ks. The findings of this research show the importance of considering changes of saturated hydraulic conductivity during constant‐head laboratory tests. Therefore, this study provides evidence for the requirement to further assess the laboratory methods for measurement of the saturated hydraulic conductivity in sandy soil mixtures.

Plasma coupled with ultrasonic for degradation of organic pollutants in water: Revealing the generation of free radicals and the dominant degradation pathways

This study explores the synergistic effects of dielectric barrier discharge (DBD) plasma coupled with ultrasound (US) in the degradation of organic pollutants in water. The optimal degradation conditions were determined to be 100W ultrasonic power, 190V DBD plasma voltage, and neutral pH. The combination of DBD plasma and US significantly enhances the generation of reactive species (·OH, ·O2-, and 1O2), leading to a 97.3% degradation efficiency of methyl orange (MO), which is 17.3% higher than DBD plasma alone. Electron spin resonance (ESR) identified ·OH, ·O2-, and 1O2 in DBD/US system, and radical scavengers were employed to elucidate their roles. The degradation process was assessed through changes in pH, conductivity, TOC and COD, with characterization and analysis via UV-Vis and LC-MS. By combining LC-MS with density functional theory (DFT) calculations, nine intermediates were identified and three degradation pathways dominated by free radicals were established. Additionally, the DBD/US system treated wastewater containing sulfamethoxazole (SMX), sulfadiazine (SDZ), tetracycline (TC), and ciprofloxacin (CIP), achieving degradation rates exceeding 80%. These findings suggest that the DBD/US coupled system holds promising potential for treating organic pollutant wastewater.

Sex-Dependent Changes in Gonadotropin-Releasing Hormone Neuron Voltage-Gated Potassium Currents in a Mouse Model of Temporal Lobe Epilepsy.

Temporal lobe epilepsy (TLE) is the most common focal epilepsy in adults, and people with TLE exhibit higher rates of reproductive endocrine dysfunction. Hypothalamic gonadotropin-releasing hormone (GnRH) neurons regulate reproductive function in mammals by regulating gonadotropin secretion from the anterior pituitary. Previous research demonstrated GnRH neuron hyperexcitability in both sexes in the intrahippocampal kainic acid (IHKA) mouse model of TLE. Fast-inactivating A-type (I A) and delayed rectifier K-type (I K) K+ currents play critical roles in modulating neuronal excitability, including in GnRH neurons. Here, we tested the hypothesis that GnRH neuron hyperexcitability is associated with reduced I A and I K conductances. At 2 months after IHKA or control saline injection, when IHKA mice exhibit chronic epilepsy, we recorded GnRH neuron excitability, I A, and I K using whole-cell patch-clamp electrophysiology. GnRH neurons from both IHKA male and diestrus female GnRH-GFP mice exhibited hyperexcitability compared with controls. In IHKA males, although maximum I A current density was increased, I K recovery from inactivation was significantly slower, consistent with a hyperexcitability phenotype. In IHKA females, however, both I A and I K were unchanged. Sex differences were not observed in I A or I K properties in controls, but IHKA mice exhibited sex effects in I A properties. These results indicate that although the emergent phenotype of increased GnRH neuron excitability is similar in IHKA males and diestrus females, the underlying mechanisms are distinct. This study thus highlights sex-specific changes in voltage-gated K+ currents in GnRH neurons in a mouse model of TLE and suggesting potential sex differences in GnRH neuron ion channel properties.

Both edge substitution effects on thermal conductivity of armchair graphene nanoribbons under tensile strain: From equilibrium molecular dynamics simulations

Thermal conductivity and phonon spectra change of graphene nanoribbon as function of both side edges substitution and strain is investigated using equilibrium molecular dynamics. Under small strain, the edge’s partial substitution by graphane plays effect role to change the phonon mode of GNR. Under large tensile strain, reduction ratio of thermal conductivity is the largest in case of fluorographane hybrid and the smallest in case of graphane hybrid. Especially, under 16 % strain, the thermal conductivity of GNR is reduced until 13 % by edges substitution of graphane. The phonon spectra shift peaks towards low frequency at high frequency range (>50 THz).

Sensitive detection of Hg(II) on MoS2/NiS2 based on interfacial engineering to accelerate the Ni2+/Ni3+ cycle: Identification the role of atomic-level heterojunction-induced electron transfer in electroanalysis

The valence change of transition metal ions in nanomaterials can highly enhance the electrochemical detection performance toward heavy metal ions (HMIs), and how to further promote the valence change calls enormous concerns in electroanalysis. In this work, an interfacial engineering that combing the MoS2 and NiS2 together to form the MoS2/NiS2 complex is proposed. The density functional theory (DFT) results reveals that the novel atomic-level heterojunction between MoS2 and NiS2 will build an internal electric field (IEF), which leads to an enhanced conductivity and valence change behavior of Ni atoms in MoS2/NiS2 complex, resulting in a superior detection performance. In detail, the formation of atomic-level heterojunctions in the MoS2/NiS2 complex accelerates electron transfer due to the valence changes associated with Ni2+/Ni3+ cycling. The active Mo4+ species on MoS2 act as electron donors, facilitating the reduction of Ni3+ to Ni2+ on NiS2, thereby promoting Ni2+/Ni3+ cycling. As anticipated, the MoS2/NiS2 complex exhibits exceptional detection performance for Hg(II), with a sensitivity of 459.13 μA μM−1 cm−2, surpassing even that of other composite materials. In general, these findings are expected to significantly advance the application of electron transfer acceleration in electroanalysis based on the construction of heterojunction.

Effects of Varying Nano-Montmorillonoid Content on the Epoxy Dielectric Conductivity

This study investigates the correlation between the interface structure and macroscopic dielectric properties of polymer-based nanocomposite materials. Utilizing bisphenol-A (BPA) epoxy resin (EP) as the polymer matrix and the commonly employed layered phyllosilicate montmorillonoid (MMT) as the nanometer-scale dispersive phase, nano-MMT/EP composites were synthesized using composite technology. The microstructure of the composite samples was characterized through XRD, FTIR, SEM, and TEM. Changes in the morphology of the nanocomposite interface were observed with varying MMT content, subsequently impacting dielectric polarization and loss. Experimental measurements of the dielectric spectrum of the nano-MMT/EP were conducted, and the influence of the material interface, at different nano-MMT contents, on the dielectric relaxation was analyzed. The study delves into the effect of the nanocomposite interface structure on ion dissociation and migration barriers, exploring the ionic conductivity of nano-MMT/EP. Lastly, an analysis of the impact of different nano-MMT contents on the dielectric conductivity is presented. From the experimental results, the arranging regularity of polymer molecules in the interface area raises. In the matrix, the ion migration barriers decrease significantly. The higher the MMT content in the interface, the lower the migration barrier is. Until the MMT content exceeds the threshold, the agglomerated micro-particles form, which decreases the polymers’ space distribution regularity, and the ions migration barrier raises. According to the changes in the rule of the ions migration barrier with the composite interface structure content, the reason for dielectric conductivity changes can be judged.

PEDOT:PSS Wire: A Two-Terminal Synaptic Device for Operation in Electrolyte and Saline Solutions.

Synaptic devices, which are designed to emulate the synaptic functions of neurons, have recently gained attention as key elements in the development of neuromorphic hardware. To date, most synaptic devices utilizing conductive polymer materials, particularly poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), have been designed as three-terminal devices. Nevertheless, a recent study revealed that a single PEDOT:PSS wire can function as a two-terminal synaptic device through additional polymerization, which creates asymmetry in the wire diameter between the anode and cathode. Owing to its high biocompatibility, PEDOT is considered a promising candidate for use in clinical information-processing devices. However, previous studies examined the synaptic function of PEDOT:PSS only in PSS solutions. Therefore, the performance of PEDOT:PSS wires in other solutions, such as physiological saline solutions, remains unknown. Herein, we investigated the effects of operating environmental conditions (including phosphate-buffered saline (PBS)) on the synaptic functions of the asymmetric PEDOT:PSS wire. Our results indicate that the synaptic conductance change in the PEDOT:PSS wire occurred in all investigated aqueous electrolyte solutions. Moreover, we revealed the relationship between the synaptic conductance change behavior and the molecular properties of the electrolyte ions. Furthermore, the waveform of the conductance change can be controlled by adjusting the conditions for wire asymmetrization. These results demonstrate that the PEDOT:PSS wire exhibits a synaptic conductance change, yielding a waveform suitable for machine learning, even under wet conditions (i.e., in any electrolyte solution, including PBS). Therefore, PEDOT:PSS wire is a promising material for two-terminal synaptic devices applicable in clinical studies.

Concentration-dependent microvascular responses to repeated iontophoresis of acetylcholine

BackgroundIontophoresis studies face challenges due to the unknown absolute drug dose delivered and the possible effect of the current used in drug delivery on the microvessels, known as current-induced vasodilation. This study aimed to investigate how various concentrations of acetylcholine (ACh), delivered through transdermal iontophoresis using repeated current pulses, impact the recovery profile of the microvascular response. MethodsThe study included fifteen healthy volunteers, and microvascular responses to five concentrations of iontophorised ACh (ranging from 0.0055 mM to 55 mM) and sterile water were assessed at six forearm skin sites using polarized reflectance spectroscopy. Iontophoresis at each concentration involved three consecutive pulses separated 8 recovery periods. ResultsCurrent-induced responses were more pronounced for lower concentrations of ACh and for sterile water. With repeated pulses, lower concentrations of ACh exhibited a recovery profile more akin to higher concentrations. PerspectiveThrough repeated iontophoresis of ACh, microvascular responses exhibit variation based on the drug concentration and the number of pulses administered. These variations are likely attributed to changes in skin conductivity and permeability.

Determination of the elemental composition and changes in thermal and electrical conductivity of “Hanford” and low-ash medium-grained graphite’s grade graphites depending on the fast neutrons fluence

Studying the properties of graphite recovered from operating nuclear reactors is vital for predicting the properties and integrity of graphite as part of assessing the continued operation and life extension of nuclear reactors. The purpose of the study is to determine the electrical conductivity and thermal conductivity of low-ash medium-grained graphite’s grade graphite in the thermal column masonry of the VVR-SM research reactor in the measurement temperature range corresponding to the conditions of normal operation of the reactor to determine the service life. In this work, the change in thermal conductivity and electrical conductivity of GMZ graphite was studied, as well as for comparison of Hanford grade graphite depending on the fluence of fast neutrons and the measurement temperature. The dependence of electrical conductivity and thermal conductivity on dose and temperature has been established. It has been shown that the greater the neutron fluence, the more both the thermal conductivity and electrical conductivity of the material decreases. The service life of the thermal column has been determined.

AGMATINE ADMINISTRATION ALLEVIATES NERVE DAMAGE AND IMPROVES NERVE FUNCTION IN METHOTREXATE INDUCED PERIPHERAL NEUROPATHY IN RATS

Objective: Chemotherapeutic agents can produce neurodegenerative changes. This study was conducted to assess the therapeutic potential of agmatine, a neuromodulator, on methotrexate induced neurodegeneration in sciatic nerve. Materials and Methods: 40 male Wistar albino rats were assigned into four groups at random as control, methotrexate, agmatine and methotrexate-agmatine. Methotrexate was injected intraperitoneally at a 37.5 mg/kg/week dose for 3 weeks. Afterwards, agmatine was administered intraperitoneally twice a day at a 40 mg/kg dose for 7 days. Sciatic functional index, nociceptive pain perception and behavioral changes were analyzed every week. Nerve conduction velocity was evaluated. Apoptotic activity and mitophagy, histopathological changes in sciatic nerves were examined. Results: Methotrexate administration resulted in a prolonged escape time to the platform and decreased the time spent in the quadrant in the water maze test; elevated nociceptive latencies; decreased the number of frames passed in the open field test; reduced sciatic NCV and SFI score. Besides, methotrexate administration caused a reduction in myelin thickness and axon diameter in sciatic nerve and a more intense glial fibrillary acidic protein immunoreactivity. Methotrexate administration triggered an increase in the Bax/Bcl-2 protein expression ratio without changing the expression level of Parkin, indicating a slight apoptotic activation. agmatine administration improved methotrexate induced changes in behavioral performances, nociceptive pain perception, nerve conduction, SFI scores and histopathological changes. Conclusion: Agmatine has been demonstrated to possess a therapeutic potential in methotrexate induced degeneration and peripheral neuropathy in the rat sciatic nerve.

A pore network modeling approach to bridge void ratio‐dependent soil water retention and unsaturated hydraulic conductivity curves

AbstractIn geotechnical engineering, understanding the relationship between soil permeability and deformation is essential, particularly for applications like earth dams, where compaction‐induced permeability reduction is crucial for performance optimization. In unsaturated soils, soil moisture content significantly impacts hydraulic conductivity. Traditionally, changes in unsaturated hydraulic conductivity have been linked to soil void ratios. However, a pore network modeling perspective reveals the significance of structural parameters, such as pore and throat size distribution and pore coordination number. This study introduces a pore network model to estimate unsaturated hydraulic conductivity based on void ratio‐dependent soil‐water retention curves. It examines how soil deformation at varying stress levels affects structural parameters and the water phase continuity. The model shows strong potential in predicting unsaturated hydraulic conductivity across different stress levels, aligning well with experimental data and established equations. Notably, the aspect ratio and coordination number parameters are most affected by stress levels. The study also presents relationships to describe changes in pore network structural parameters with soil void ratio, which can be used to predict soil‐water retention curves and unsaturated hydraulic conductivity at various stress levels.

Insight into behaviors of internal interactions and thermodynamic properties of binary mixtures composed of ether-functionalized ionic liquids and 1,4-butyrolactone or propylene carbonate

A deeper comprehension of the mechanism behind various internal interactions and their influence on system properties encourages the utilization of ionic liquid mixture systems. In this work, the excess molar volume, viscosity deviation, change of electrical conductivity, and ionicity of both binary mixtures for N-methyl-N-methoxyethylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([MOEMPYrr][TFSI]) ether-functionalized ionic liquids (ILs) with 1,4-butyrolactone (GBL) or propylene carbonate (PC) were systematically studied. The specific interactions between ILs and solvent molecules were investigated by using the COSMO-RS model in terms of DFT calculation. The results indicate that [MOEMPYrr]+ tends to act as a hydrogen bond donor and [TFSI]- tends to act as a hydrogen bond acceptor, and GBL (or PC) has a strong hydrogen bond acceptance ability. Furthermore, based on the radial distribution functions (RDFs) from molecular dynamics (MD) simulations, the H1 atom in [MOEMPYrr]+, the O2 atom in [TFSI]-, the O3 atom in GBL, and the O4 atom in PC are selected as reference sites to study the interaction between cations and anions (or solvent molecules). It is found that the interaction between anions and cations in the [MOEMPYrr][TFSI] + PC system is stronger than that in the [MOEMPYrr][TFSI] + GBL system, and the interaction between cations and GBL is stronger than that between cations and PC. This result further explains why the excess molar volumes (VE) of [MOMPYrr][TFSI] + GBL binary mixtures are greater than that of [MOMPYrr][TFSI] + PC binary mixtures from a microscopic perspective.

Effect of abrupt post‐fire ash inputs on water quality and the phytoplankton community in lentic freshwaters

Abstract One of the major threats to biodiversity is changing fire regimes, particularly increasingly frequent fires, especially during the dry season. However, studies on the direct and indirect effects of fire on biotic responses in aquatic ecosystems are still scarce. In this study, we investigated how water quality and phytoplankton community structure were affected by different ash concentrations from burning vegetation of a tropical savanna. We used a microcosm experiment to simulate the aquatic ecosystem with different ash concentration scenarios and evaluated the water quality and the composition, richness and density of phytoplankton over time. We found increased total phosphorus and ammoniacal nitrogen concentrations after ash addition, in addition to changes in electrical conductivity. We identified 242 phytoplankton taxa throughout the experiment and identified changes in species composition among treatments. We identified changes in the taxonomic richness of total phytoplankton, green algae and desmids over time. The density of total phytoplankton, diatoms, green algae, desmids and cyanobacteria also changed over time. Our results suggest that ash from terrestrial fires affects water quality and phytoplankton communities depending on the proportion of ash input. Our results serve as a basis for further investigations of the effects of fire on abiotic conditions in aquatic ecosystems and their communities over long periods of time. Finally, longer‐term experiments are needed to evaluate delayed responses by the phytoplankton community.

Non-steady flow decomposition behaviors of heat and mass transfer on intrinsic kinetics for methane hydrate particles transported in pipelines

The differential equations governing the decomposition rate and activation energy, convective mass transfer, methane diffusion and fugacity, as well as heat conduction and enthalpy change were derived by integrating thermal convection, heat conduction, mass transfer and intrinsic kinetics. Mathematical models for decomposition kinetics and thermodynamics in a non-steady field were solved using a radial logarithmic grid for node division and discretization of the equations. The study elucidated the heat and mass transfer processes as well as decomposition kinetics in pipelines by analyzing the impacts of particle size, temperature, pressure, flow rate and activation energy on decomposition rate. The results indicated that compared with the isothermal decomposition of the intrinsic kinetic model and static experimental decomposition, the complex non-steady multiphase flow model offers a more accurately simulation of hydrate decomposition as well as associated heat and mass transfer processes. Hydrate decomposition is characterized as a non-isothermal dynamic ablation process with heat transfer rate and intrinsic kinetics dominating during the preliminary stage and the stable stage, respectively. An increasing in the slurry temperature, temperature fluctuation and flow rate accelerated the heat transfer rate capacity, enhanced convective heat transfer capacity and facilitated hydrate decomposition, with the mass transfer rate exhibiting lesser influence. The particle surface area and slurry temperature exhibited the most significant influence on hydrate decomposition, which was followed by flow rate. Upon increasing particle size from 1 mm to 5 mm and the temperature from 293 K to 313 K, the decomposition rate increased by 20.7 times and 13.5 times, respectively. Furthermore, enhancing temperature and flow rate while decreasing particle size and pressure decreased both the decomposition time and the duration required for the decomposition rate to reach its peak. Additionally, the decomposition rate and its constant vary with the activation energy.

Endoscopic Cartilage Myringoplasty with Anterior Margin Preservation for Repairing Large Anterior Perforations.

Objective: This study compared the graft outcomes and complications of endoscopic cartilage inlay myringoplasty with preservation of anterior margins (IPAM) and the cartilage underlay technique with raising the tympanomeatal flap (CUTF) for repairing large anterior perforations. Materials and Methods: In total, 55 patients with large anterior perforations were recruited and allocated to the IPAM (n = 28) or the CUTF (n = 27) group. The graft success rate, hearing gain, operation time, and postoperative complications were compared between the groups at 12 months. Results: The mean operation times were 29.3 ± 2.7 minutes and 46.4 ± 3.9 minutes in the IPAM and CUTF groups, respectively (P < .001). The residual perforation rate was 0.0% in the IPAM group and 11.1% in the CUTF group (P = .222). All patients completed the 12-month follow-up. The overall graft success rate was 96.4% in the IPAM group and 88.9% in the CUTF group (P = .577). No significant differences were observed between the groups in terms of postoperative pure-tone averages for air conduction and bone conduction, air-bone gaps (ABGs), or ABG changes. In the CUTF group, 22.2% of the patients reported altered taste perception, 3.7% experienced bony external auditory canal (EAC) stenosis, and 3.7% developed EAC cholesteatoma. By contrast, the IPAM group did not have any cases of altered taste perception, EAC stenosis, or cholesteatoma. Conclusions: Endoscopic cartilage myringoplasty with IPAM and anterior perichondrium folding is a simple, effective, and minimally invasive technique for repairing large anterior perforations. It offers a high graft success rate and better hearing improvement compared to CUTF.

High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells

Proton-conducting solid oxide fuel cells (P-SOFCs) are widely studied for their lower working temperatures than oxygen-ion-conducting SOFCs (O-SOFCs). Due to the elevated preparation and operation temperatures varying from 500 °C to 1500 °C, high mechanical stresses can be developed in the electrolytes of SOFCs. The stresses will in turn impact the electrical conductivities, which is often omitted in current studies. In this work, the mechanical–conductive behaviors of Y-doped BaZrO3 (BZY) electrolytes for P-SOFCs under high temperatures are studied through molecular dynamics modeling. The Young’s moduli of BZY in fully hydrated and non-hydrated states are calculated with different Y-doping concentrations and at different temperatures. It is shown that Y doping, oxygen vacancies, and protonic point defects all lead to a decrease in the Young’s moduli of BZY at 773 K. The variations in the conductivities of BZY are then investigated by calculating the diffusion rates of protons in BZY at different triaxial, biaxial, and uniaxial strains from 673 K to 873 K. In all cases, the diffusion rate present a trend of first increasing and then decreasing from compression state to tension state. The variations in elementary affecting factors of proton diffusion, including hydroxide rotation, proton transfer, proton trapping, and proton distribution, are then analyzed in detail under different strains. It is concluded that the influences of strains on these factors collectively determine the changes in proton conductivity.