Changes In Physicochemical Conditions Research Articles

Mineralogical and radiological studies on some Paleozoic yellow ochre deposits in Southwestern Sinai, Egypt

Yellow ochre is the basic material used in the manufacture of yellow oxide (a commercial product). Yellow ochre samples were taken from three different formations in southwestern Sinai: Abu Hamata, Um Bogma, and Abu Zarab. Yellow ochre occasionally exists in Abu Hamata Formation particularly in El Ferah area, associated with Fe–Mn ore in Wadi El Sahu (Um Bogma Formation) and in Himayer area (Abu Zarab Formation). The XRD analysis of the raw material reveals that they are mainly composed of goethite, which is associated with quartz and kaolinite in El Ferah area, hematite, kaolinite and quartz in Himayer area, and kaolinite, gypsum and quartz in Wadi El Sahu. The commercial product is mainly composed of goethite, quartz, and calcite. The heavy mineral investigation shows that some yellow ochre samples contain zircon and rare earth sulfate which may be responsible for the radioactivity of ochre due to their thorium and uranium content. The average values of specific radio-activities of most radionuclides in the samples of Himayer area I and II, and El Sahu I are higher than the respective world averages, while their activities are lower in El Ferah and El Sahu II. Th/U and Ra/U ratios exhibit vigorous changes in physico-chemical conditions during uranium leaching and deposition. Most of the radiological parameters in the ferruginous sediment and commercial product samples from El Ferah, El Sahu II, and Himayer II are lower than the recommended international values but higher than those from Himayer I and El Sahu I samples. The plotted hierarchical cluster analysis (HCA) exhibits that the main contributors for the hazards of these sediments and their commercial product are 238U, 232Th and 226Ra in Himayer I &II, commercial products, and El Ferah area, 232Th and 226Ra in El Sahu II , 232Th, 40K and 226Ra in El Sahu I.

Scheelite as a microtextural and geochemical tracer of multistage ore-forming processes in skarn mineralization: A case study from the giant Xintianling W deposit, South China

The Xintianling deposit is one of the largest skarn-type scheelite deposit in China. Recent discoveries of quartz-vein-type scheelite mineralization within the deposit have raised questions about its origin and the evolution of ore-forming fluids, hindering a comprehensive understanding of the ore-forming process. We investigate the microtextures, trace elements, and oxygen isotope compositions of scheelite from different stages in both skarn-type and quartz-vein-type W mineralizations. Combined with apatite geochemistry and U–Pb dating, we determine the timing of quartz-vein-type mineralization and the evolution of magmatic-hydrothermal system. Based on detailed petrological observation, three types (seven subtypes) of scheelite and two types of apatite are identified. The Mo contents and Eu/Eu* ratios of scheelite, along with the Ce/Ce* ratios of apatite indicate the oxygen fugacity of fluids during the skarn metallogenic episode is generally higher than that during the quartz-vein metallogenic episode. Furthermore, the Y/Ho ratios and REE patterns of scheelite indicate the presence of at least three significant stages of fluid influx and fluid-rock interactions throughout entire ore-forming process. The O isotope compositions of scheelite in the quartz-vein-type metallogenic episode reveal that the ore-forming fluids are originated from a magmatic source, and meteoric water was mixed into the system, leading to the precipitation of the latest stage of scheelite. The apatites closely coexist with scheelite, from the early and the late stages of quartz-vein metallogenic episode, yield consistent U–Pb ages within error of 160.4 ± 2.4 Ma and 158.4 ± 1.3 Ma, respectively, indicating a close genetic link between quartz-vein-type W mineralization and the fine-grained porphyritic biotite granite. Our study highlights the significance of pulsed fluid exsolution and the combined effects of multiple mechanisms, including fluid-rock interaction, fluid mixing, and physicochemical condition changes, in the formation of large W deposits.

Spatio-temporal fluid evolution of gold deposit in the Jiaodong Peninsula, China: A case study of the giant Xiling deposit

The Xiling gold deposit (>592 t @ 4.02 g/t) in the eastern Zhaoyuan-Laizhou gold belt of the Jiaodong Peninsula, is currently the largest gold deposit and deepest gold mine in China. This study presents microthermometric fluid inclusions data on quartz gangue, as well as trace element and S isotope data on pyrite from different mineralization stages and depths in the Xiling gold deposit to provide new insights into the spatio-temporal evolution of the ore-forming fluid that led to a giant Early Cretaceous gold deposit in the Jiaodong Peninsula. The δ34S values of pyrite range from 7.5 to 15.2 ‰, but vary temporally and spatially, reflecting a changes in physicochemical conditions as the ore-forming fluid migrated to different crustal levels over time, also suggesting Precambrian basement as the principal sulfur source. Trace element analyses of pyrite revealed that ore-forming metals were scavenged from the wall rock and then incorporated into the pyrite. Fluid inclusions data reveal that the ore-forming H2O-CO2-NaCl ± CH4 fluid had a medium to high temperature (283–401 °C), medium-low salinity (1.91–8.00 wt% NaCl equivalent), analogous to most gold deposits in the Jiaodong Peninsula. Intensive interaction between the ore-forming fluid and wall rock changed the physicochemical conditions of fluid, leading to gold precipitation. The study supports the notion of the ore fluid of Jiaodong-type gold deposit having originated from a metasomatized lithospheric mantle.

Genesis of the Haidewula volcanic rock-hosted uranium deposit in the East Kunlun Orogen, northwestern China

The Haidewula deposit in Northwest China is a recently discovered volcanic-related uranium deposit. To determine the origin of this deposit, whole-rock geochemical, stable isotope, U–Pb isotope and trace element compositions of the pitchblende were obtained, and microthermometric analyses of the fluid inclusions were performed. The Haidewula deposit is located within the Phanerozoic volcanic basin and contains Silurian trachyte, rhyolite, rhyolitic tuff, and Triassic basalt. These Silurian volcanic rocks are characterized by high-K calc-alkaline properties and were intruded by Triassic dolerite, which served as a source for mineralization. The mineralized zones were primarily influenced by NE-NNE-trending and SE-dipping faults. Vein-like pitchblende is commonly associated with calcite, illite, quartz, pyrite, and fluorite. Geochronology indicated that uranium mineralization occurred during 235–230 Ma. The ore-forming fluids contained meteoric water with limited magmatic water and exhibited moderate to low temperatures (246–133 °C), moderate to low salinities (17.3–1.06 wt% NaCleqv) and Cl-bearing rocks. U precipitation was attributed to changes in physicochemical conditions resulting from fluid–rock interactions and fluid boiling. The uranium mineralization at Haidewula coincided with the evolution of the Tethys Ocean. During late Wenlock, an extensional environment, triggered by the closure of the Proto-Tethys Ocean, led to the extrusion of Haidewula rhyolite and trachyte. During the crustal extensional environment resulting from the subduction of the A’nyemaqen Ocean in the Middle Triassic, ore-forming fluids circulated and remobilized uranium from the Haidewula volcanic rocks. As a result of fluid–rock interactions and fluid boiling within brittle structures, the U-complexes destabilized and formed pitchblende at Haidewula.

Hyper-enrichment of gold via quartz fracturing and growth of polymetallic melt droplets

Abstract Gold precipitation in hydrothermal systems is traditionally attributed to supersaturation of gold due to decreasing gold complex stability triggered by changes in physicochemical conditions of the ore fluid. However, ultrahigh-grade gold veins in orogenic (shear zone related) gold deposits can contain kilograms per tonne of gold or more, in marked contrast to the typically very low gold concentrations (tens of parts per billion) in fluid. The gold mineral assemblage is commonly restricted to native gold and/or Au-(Ag)-tellurides and occurs in micro-fractures of sheared quartz veins. Textural and compositional characterization of such assemblages, coupled with hydrothermal diamond anvil cell experiments and heating-freezing experiments, provides evidence for an alternative ultrahigh-grade gold enrichment mechanism via growth of polymetallic melt droplets induced by quartz fracturing. We propose that polymetallic melt droplets of Au-Ag-Te-Bi–rich composition form through adsorption-reduction of metal complexes on fractured quartz surfaces, where surface silanol groups and hydrogen serve as reductants. The melt droplets subsequently grow by catalyzing reduction of metal complexes and absorbing metals from fluids percolating in the fractured quartz network. The mobile and reactive polymetallic melt droplets can repeatedly react with the fluid on protracted quartz fracturing and efficiently continue to scavenge gold from multiple pulses of gold-undersaturated ore fluids.

Seasonally varying biogeochemical regime around the coral habitats off central west coast of India

The Western Indian Continental Shelf (WICS) experiences upwelling during the Southwest Monsoon (SWM), leading to deoxygenation and acidification of subsurface waters. The region has patchy growth of corals, e.g. in the Grande Island and Angria Bank. Measurements made during the late SWM of 2022 reveal that the shelf waters around the Grande Island were subject to varying environmental conditions, viz. lower temperature (21.3–26.1°C), oxygen (0–4.9 mL L−1) and pHT (7.506–7.927). Complete anoxia was associated with sulphide build-up to a maximum of 5.9 μmol L−1 at 17 m depth. An additional episodic condition (high temperature, low oxygen and pH) also occurred associated presumably with a plankton bloom in April 2017. Hence, unlike the offshore coral site Angria Bank, waters around the Grande Island experiences extreme changes in physico-chemical conditions (e.g. Ωarg ∼1.2–1.8 during October 2022) seasonally as reported here. The biogeochemical conditions are however not as intense (Ωarg = 0.6) as observed along the eastern boundary upwelling system of the Pacific Ocean.

Tethered Particle Motion Analysis of DNA-Binding Properties of Architectural Proteins.

Architectural DNA-binding proteins are key to the organization and compaction of genomic DNA inside cells. Tethered particle motion (TPM) permits analysis of DNA conformation and detection of changes in conformation induced by such proteins at the single molecule level in vitro. As many individual protein-DNA complexes can be investigated in parallel, these experiments have high throughput. TPM is therefore well suited for characterization of the effects of protein-DNA stoichiometry and changes in physicochemical conditions (pH, osmolarity, and temperature). Here, we describe in detail how to perform tethered particle motion experiments on complexes between DNA and architectural proteins to determine their structural and biochemical characteristics.

Geochemistry and geochronology of Beiya giant Au polymetallic deposit: Implications for multistage ore-fluid pulses in a skarn system

Garnet is one of the most typical minerals in skarn deposits, and its texture and composition is a proxy for the changing physicochemical conditions. Thus, mineralogical and geochemical characterization of different garnet types can provide important information on the nature and evolution of ore-forming fluids. The Beiya gold-polymetallic deposit is China’s largest skarn-type Au deposit with Au reserves of >380 t. Although several studies have addressed the skarn formation mechanism and nature of fluid evolution, a systematic study on the changes in the composition and texture of garnet from wall rocks to ore-related intrusion has not yet been attempted. In this work, we carry out a systematic investigation along a horizonal profile in the open pit of the Beiya deposit. Our results show that the garnet in the profile belongs to grossular-andradite solid solution series with all grains showing well-developed fine oscillatory zoning. The garnets are of two types: the first type (Grt I) formed within the endoskarn, is reddish to red with euhedral-subhedral megacryst structure (>10 mm) and has altered surfaces. The second type (Grt II) occur in the proximal exoskarn, is red to brown–red, euhedral-subhedral, with medium- to fine- grained structure (0.3–4 mm) and displaying oscillatory zoning. Unlike Grt I, hydrous minerals occur in the pores among Grt II garnets, such as calcite, quartz, epidote and chlorite. Also, calcite-chlorite vein, quartz vein and quartz-chalcopyrite-pyrite vein cuts the Grt II garnets. Grt I is dominantly grossular (Adr14.88-43.58Grs55.25-82.87), depleted in the large ion lithophile elements (LILE), relatively enriched in high field strength elements (HFSEs) and enriched in heavy rare earth elements (HREEs) with negative Eu anomalies. Grt II is mostly andradite (Adr62.18-98.91Grs0-36.22), depleted in the LILE and HFSE, enriched in light rare earth elements (LREEs) with slightly positive Eu anomalies. Here we selected Grt II for in-situ LA-ICP-MS U-Pb dating, since Grt I contains negligible uranium. The results yielded a lower intercept 206Pb/238U age of 35.3 ± 1.8 Ma (MSWD = 0.68, n = 23). The calculated oxygen isotopic compositions of hydrothermal fluids in equilibrium with two types of garnets range from 6.46 ‰ to 8.56 ‰ (average 7.89 ‰), which are within the range of values for magmatic fluids. We infer that the physicochemical conditions of the hydrothermal fluid changed from relatively reduced, nearly neutral, and low water/rock ratios to slightly oxidized, slightly acidic, and high water/rock ratios. The chlorine content in the fluid increased during garnet growth. The fluctuating compositions of garnets in the skarn suggest multistage ore-fluid activities and the fluid evolution provide insights into the ore-forming process.

Microbiome dynamics modeling and analysis in relation to spatio-temporal changes in physicochemical conditions of the water ecosystem

Microbiome dynamics modeling and analysis in relation to spatio-temporal changes in physicochemical conditions of the water ecosystem

A mathematical model to simulate the release of Fe and Mn from sediments in a drinking water reservoir

Fe and Mn release from sediments promotes the release of other chemicals and jointly affects downstream water safety, especially in drinking water reservoirs. Quantitative research on release processes and flux estimation methods for endogenous Fe and Mn in reservoirs is still limited. Static incubation experiments were designed to systematically explore the effects of water temperature (WT), dissolved oxygen (DO), pH, carbon sources, and microbial activity on Fe and Mn release. The results showed that increased WT and carbon source addition promoted the release of acid-extractable Fe and Mn from the sediments; hypoxia and acidification promoted the dissolution of reducible sediment Fe and Mn; and microorganisms participated in the cycling of Fe and Mn. Based on the experimental results, first-order kinetic equations for sediment Fe and Mn release to overlying water were proposed, and the relationships between release rate and environmental factors were mathematically represented by a surface equation (R2 = 0.88 and 0.86, respectively). A diffusion gradients in thin films (DGT) device based on the diffusion model was used in situ to obtain the diffusion fluxes of Fe (JFe = 13.93 mg m-2 d-1) and Mn (JMn = 3.48 mg m-2 d-1). When environmental factors obtained in the field were introduced into the established mathematical model, the modeled release fluxes of Fe and Mn were RFe = 20.92 mg m-2 d-1 and RMn = 13.12 mg m-2 d-1, respectively. The established model filled gaps in the diffusion model, which does not account for differences in release fluxes under changing physicochemical water conditions. This work serves as a reference for studying the release fluxes of endogenous chemicals in sediments.

Effect of Different Plant Growth-Promoting Rhizobacteria on Biological Soil Properties, Growth, Yield and Quality of Oregano (Origanum onites L.)

Intensive agriculture uses continuous chemical fertilizers to increase crop yields, but excessive use of fertilizers leads to environmental pollution, permanent changes in physicochemical conditions in soil ecology, deterioration of soil biological health, leaching of nutrients, surface and groundwater pollution and eutrophication. Plant growth-promoting rhizobacteria (PGPR) are becoming increasingly important for ensuring crop safety, increasing nutrient uptake and output, lowering fertilizer costs, preventing environmental contamination and promoting sustainable agriculture and agricultural resources. Therefore, the purpose of this study was to identify and evaluate the effects of fifteen bacteria strains that were isolated from various acidic rhizospheric soils as biofertilizers on soil biological properties. Growth, yield and quality traits were analyzed, and various PGPR were identified using 16S ribosomal RNA of Turkish oregano. Fifteen bacterial inoculations with 1-aminocyclopropane-1-carboxylate (ACC) deaminase, N2-fixing, P-solubilizing and/or IAA-producing genes were used in the experiment, which was carried out in a randomized block design with five replicates (each with three pots) and a control without inoculation. Increased biological activity in soil inoculated with bacteria with multiple traits was confirmed by high C and N content in microbial biomass, urease, dehydrogenase and acid and alkaline phosphatase activities. Essential oil content, oil yield, thymol and carvacrol contents increased by 0.5–40.1%, 5.9–71.9%, 0.07–16.7% and 0.3–9.2%, respectively, as a result of bacterial inoculation. Oil content ranged from 2.02% to 2.83%; carvacrol (66.1–72.2%) was the main constituent, followed by thymol (14.5–16.9%) and linalool (1.38–3.68%). Two large PGPR groups were formed based on genetic distance analysis. Responses were variable and depended on the inoculant strain and the parameters being evaluated. The results indicate PGPR has clear potential for improving the yield of cultivated aromatic and essential oil plants, such as oregano.

Depositing >1.5 Mt of Tin Within <1 m.y. of Initial Granitic Intrusion in the San Rafael Tin (-Copper) Deposit, Southeastern Peru

Abstract The San Rafael Sn (-Cu) deposit, located in the Eastern Cordillera of southeast Peru, is one of the world’s largest cassiterite-bearing vein systems (>1 Mt Sn produced since 1969). The deposit consists of a quartz-cassiterite-chlorite-sulfide lode system spatially associated with an upper Oligocene (ca. 24 Ma) S-type granitic pluton. Based on a revised paragenetic sequence for the deposit, we interpret the temporal setting of both magmatic (biotite, K-feldspar) and hydrothermal (muscovite, adularia, cassiterite) minerals analyzed by 40Ar/39Ar step-heating and U-Pb laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) geochronology. The least-disturbed biotite sample from the megacrystic monzogranite yielded a 40Ar/39Ar plateau age of 24.10 ± 0.26 Ma (2σ), which constrains the time of cooling of the upper part of the pluton to below 300°C. Greisen developed on top of the granitic cupola and its immediate metamorphic aureole dated at 24.24 ± 0.24 Ma (2σ; 40Ar/39Ar muscovite average plateau age) is interpreted to be contemporaneous with the emplacement of pre-ore quartz-tourmaline veins and breccias. In situ U-Pb dating of cassiterite, including both botryoidal cassiterite (“wood tin”) and coarse-grained cassiterite in quartz-chlorite veins and breccias, constrains the timing of the main Sn ore stage to between 24.10 ± 0.37 and 23.47 ± 0.53 Ma (2σ). Botryoidal and coarse-grained cassiterite are characterized by similar trace element compositions with fluctuating metal concentrations across growth banding, suggesting significant changes of physicochemical conditions of the hydrothermal system during cassiterite precipitation, likely caused by rapid and repeated mixing between magmatic fluids and meteoric groundwaters. Polymetallic sulfide-rich veins and quartz-carbonate veins are constrained to have formed between 22.72 ± 0.11 and 22.29 ± 0.24 Ma (2σ), based on adularia 40Ar/39Ar plateau ages. The latter overlap partially reset 40Ar/39Ar age spectra for K-feldspar megacrysts in the host granite and thus reflect pervasive alteration by hydrothermal fluids. Collectively, the results show the magmatic-hydrothermal system spanned at least 2 m.y. with the main Sn ore stage representing <1 m.y. in the lifetime of the deposit. The latest polymetallic stages postdate the main Sn ore stage by ca. 1 m.y. and reflect the waning of the hydrothermal system, accompanied by additional incursion of meteoric groundwaters. This study provides further evidence that the present-day exposed level of the San Rafael granite was a passive host for the Sn mineralization and only provided the structural focusing for the mineralizing fluids derived from a deeper part of the magmatic system.

No biological effect on magnesium isotope fractionation during stromatolite growth

The growth and morphology of stromatolites have been previously linked to diverse microbial activities. However, the role of microbial metabolisms on carbonate formation during stromatolite growth remains controversial. Magnesium isotopes have been proposed to serve as a tracer of microbial carbonate formation, implying a potential biological isotope fractionation. To further elucidate whether Mg isotope fractionation is modified during microbial carbonate formation, this study reports Mg isotope compositions of Holocene stromatolites and pore waters from Lagoa Salgada, a coastal ephemeral lake in Brazil. The stromatolitic carbonates are composed of high-Mg calcites characterized by extremely positive inorganic δ13C values, up to +20‰, and variable δ26Mg values, ranging from −2.98‰ to −0.68‰. Multiple pieces of evidence consistently demonstrate changes in microbial metabolism resulting from ecosystem fluid chemistry evolution. However, the direction of Mg isotope fractionation associated with carbonate precipitation remained invariable despite the changes in microbial activity. Mineralogical features indicate that the stromatolitic carbonates formed via 2-D nucleation. An isotopic mass balance calculation based on the observed variations in δ26Mg values and Mg concentrations of associated pore waters argues for an Mg isotopic equilibrium fractionation factor of −2.60‰ associating with the carbonate formation at Lagoa Salgada, well-matching experimental values for abiotic calcite precipitation. Thus, the observed δ26Mg variability of stromatolitic carbonates is primarily controlled by the changes of physicochemical conditions in the ambient fluid. We infer that during the formation of stromatolites, a consortium of different microbial communities produces extracellular polymeric substances, which serve as a substrate for carbonate nucleation from ambient fluid without significantly affecting the fractionation of Mg-isotopes. Our findings shed light on the effects of microbial processes on carbonate formation during stromatolite growth and improve the current understanding of the Mg isotope record in microbial carbonates.

Trace Element and Sulfur Isotopic Analysis of Pyrite from the Luyuangou Gold Deposit, Xiong’ershan Au-Ag Polymetallic District, Central China: Implications for The Origin and Evolution of Ore-Forming Fluids

The Luyuangou gold deposit is located in the eastern section of the Xiong’ershan Au-Ag polymetallic district (XESPMD) and consists of a few gold-bearing veins found in the EW-striking faults located in the Archean Taihua and Mesoproterozoic Xiong’er Groups. The gold deposits contain numerous gold-bearing pyrites in thin quartz veins, representing an ideal tool for explaining the enigmatic genesis of gold deposits in the XESPMD. The distributions of trace elements and the sulfur isotopes of gold-bearing pyrite in the Luyuangou gold deposit were investigated to define the origin and evolution of ore-forming fluids. Five generations of pyrite have been identified: coarse-grained euhedral pyrite cores (Py1-1) and margins (Py1-2) in milky quartz veins, fine-grained pyrite (Py2) in quartz veins and host rocks, pyrite (Py3) in quartz + polymetallic sulfide veins, and pyrites (Py4) in quartz calcite veins. The distributions of trace elements indicated that Py2 and Py3 represented the main gold-bearing minerals and contained high concentrations of As, Au, Ag, Pb, Zn, and Cu, and the distributions were controlled by the micro/nanoinclusions. The δ34S values in the five pyrite generations ranged from −19.5 to 3.4‰. Py2 (−15.4 to −6.1‰) and Py3 (−19.5 to −12.4‰) had the lowest δ34S values, indicating that the sulfur originated from an oxidizing fluid. Py1 showed δ34S values (−0.3 to 1.9‰) corresponding to a magmatic origin. Py4 (1.1–3.4‰) displayed the highest δ34S values, indicating that the sulfur originated from the host rock under the action of meteoric water cycles. Analyses of the pyrite’s trace elements and sulfur isotopes, in combination with geological evidence, indicated that magmatic ore-forming fluids contributed to the formation of the Luyuangou gold deposit. The magmatic ore-forming fluids interacted with meteoric water during the main mineralization period. The changing physicochemical conditions of the mineralized fluids caused the precipitation of a large amount of gold and other mineralized elements.

A Review on Different Zooplankton Culturing Techniques and Common Problems Associated with Declining Density

Zooplankton are primary consumers and serves as a crucial connection between primary producers and consumers in the aquatic food chain and higher consumers. Plankton is consumed by more than 75% of fish species at some point throughout their life. Supply of live feed cultures is critical to the expansion of aquaculture enterprises, particularly the larviculture sector, which generates fish and crustacean seeds for grow-out businesses. However, zooplankton is rarely farmed in high enough densities to be commercially viable on a large scale. This is owing to dynamic changes in physicochemical conditions in the culture system, which would normally result in a shift in the reproduction pathway from parthenogenetic to sexual, which creates resting eggs and reduces overall live feed output. The density of these live feed organisms can alter in response to environmental conditions such as eutrophication due to an excess of nutrients, acidification, pollution, salinity intrusion, and other factors that occur within the system. The water quality and food supply in the system have a big impact on zooplankton population dynamics, especially in a culture environment. The goal of this review is to have a better understanding of the many strategies for growing zooplankton utilizing various fertilization methods in order to maintain a constant population density. This review focusing on the density of zooplankton, the biological responses of live feed to fertilization, and common challenges that farmers face in the culture. In particular, we (i) examine the many zooplankton culture techniques that have been developed over time, (ii) explain the biological reactions of zooplankton to changes in culture conditions, and (iii) show the frequent issues as-sociated with live feed culture.

Modern diatom assemblages and their association with meteorological conditions in two lakes in northeastern Poland

The population dynamics of diatoms are affected by a variety of environmental variables. Due to their short generation times and high sensitivity to changes in physicochemical conditions, diatoms are considered good environmental indicators. The main goal of our study was to find and explain the relationships between changes in meteorological conditions and diatom fluxes and taxonomic composition based on the example of two small lakes: Łazduny and Rzęśniki. Using meteorological data, sediment traps, and regular measurements of limnological and hydrochemical properties of the water column, we collected a three-year-long, high-resolution series of observations. The results show that total diatom fluxes are indirectly influenced by changes in meteorological conditions, acting through changes in the mixing regimes that determine the nutrient and light availability in lakes. Statistical analyses showed that the variability of the diatom data is correlated with air temperature and wind speed. Nevertheless, their influence on diatom assemblages is most likely the surrogate for the complex changes in the physical structure of the investigated lakes. Despite many similarities between the studied lakes such as mixing regime patterns, dominant diatom taxa, and seasonal dynamics of diatom fluxes, we recorded differences in both the seasonal succession of specific diatom taxa and the occurrence of the peaks of total fluxes, and differences in taxonomic composition referring to less dominant taxa. We attribute these dissimilarities to the local conditions, such as the hydrological types of the lakes, the extent of the littoral zone, and exposure to the sunlight connected to the position in the catchment.

Bacterial Communities in a Gradient of Abiotic Factors Near a Sulfide Thermal Spring in Northern Baikal

The structure and diversity of microbial communities developing in the combined gradient of temperature (44–19 °C), as well as concentration of oxygen (0–10 mg/L) and hydrogen sulfide (33–0.7 mg/L), were studied in the thermal sulfide spring on the coast of Northern Lake Baikal. The predominance of bacteria participating in sulfur and nitrogen cycles and significant changes in the composition of microbial communities were noted at changing physicochemical conditions. Thiovirga sp. (sulfur-oxidizing bacteria, up to 37%) and Azonexus sp. (nitrogen-fixing bacteria, up to 43%) were dominant at high temperatures and concentrations of hydrogen sulfide in two hydrotherms. In addition, a significant contribution of the Rhodocyclaceae family (up to 51%) which is involved in the denitrification processes, and Acetoanaerobium sp. (up to 20%) fixing carbon oxide were found in the spring water. In the stream, mainly oxygenic cyanobacteria (up to 56%) developed at a temperature of 33 °C, in the presence of hydrogen sulfide and oxygen. In addition, sulfur bacteria of the genus Thiothrix (up to 48%) found in epibiotic communities of benthic animals of Lake Baikal were present here. Thiothrix sp. formed massive fouling in the zone of mixing lake and thermal waters with a significant contribution of hydrogen-oxidizing bacteria of the genus Hydrogenophaga (up to 22.5%). As well as chemolitho- and phototrophic bacteria, chemoorganotrophs (phyla Firmicutes, Chloroflexi, Desulfobacterota, Nitrospirota, Fibrobacterota, etc.) have been identified in all communities. The chemical parameters of water in spring and coastal zones indicate a significant change in the composition of thermal waters occurring with the participation of diverse microbial communities that contribute to the assimilation of inorganic components of mineral thermal waters.

The B. subtilis Rok protein is an atypical H-NS-like protein irresponsive to physico-chemical cues.

Nucleoid-associated proteins (NAPs) play a central role in chromosome organization and environment-responsive transcription regulation. The Bacillus subtilis-encoded NAP Rok binds preferentially AT-rich regions of the genome, which often contain genes of foreign origin that are silenced by Rok binding. Additionally, Rok plays a role in chromosome architecture by binding in genomic clusters and promoting chromosomal loop formation. Based on this, Rok was proposed to be a functional homolog of E. coli H-NS. However, it is largely unclear how Rok binds DNA, how it represses transcription and whether Rok mediates environment-responsive gene regulation. Here, we investigated Rok's DNA binding properties and the effects of physico-chemical conditions thereon. We demonstrate that Rok is a DNA bridging protein similar to prototypical H-NS-like proteins. However, unlike these proteins, the DNA bridging ability of Rok is not affected by changes in physico-chemical conditions. The DNA binding properties of the Rok interaction partner sRok are affected by salt concentration. This suggests that in a minority of Bacillus strains Rok activity can be modulated by sRok, and thus respond indirectly to environmental stimuli. Despite several functional similarities, the absence of a direct response to physico-chemical changes establishes Rok as disparate member of the H-NS family.

Genesis of the Bayan qagan dongshan Sn-Pb-Zn-Ag deposit, NE China, based on sphalerite chemistry and sulfur isotope

The Bayan qagan dongshan Sn-Pb-Zn-Ag deposit (223,383 t Sn @ 0.755 %; 9,446 t Ag @ 187.46 g/t; 752,944 t Zn @ 1.60 %; 150,828 t Pb @ 0.521 %) is mainly hosted by the contact zones between early Cretaceous granite porphyry and Permian epimetamorphic rock in the southern part of the Great Khingan Range of northeastern China. Nevertheless, the migration and precipitation form of silver in the deposit is undefined. In this study, seven subtypes of sphalerite (SpⅠ, SpⅡ-1, SpⅡ-2a, SpⅡ-2b, SpⅡ-2c, SpⅡ-3a and SpⅡ-3b) were identified according to mineral assemblages in the quartz-tourmaline-sericite-sphalerite stage (Ⅰ) and cassiterite-sulfide stage (Ⅱ) of the deposit. SpⅠ is distributed in the granite porphyry as disseminated ores, accompanied by tourmalinization and fluoritization. SpⅡ-1 is predominantly associated with cassiterite, whereas SpⅡ-2 (including SpⅡ-2a, SpⅡ-2b and SpⅡ-2c) mainly coexisted with stannite, in which chalcopyrite exsolution is found. SpⅡ-3 (including SpⅡ-3a and SpⅡ-3b) is mainly characterized by its irregular shape, and intimately associated with galena and Sb-bearing mineral. Representative time-resolved depth profile and inter-element correlation analyses based on the LA-ICP-MS method illustrated that: 1) Fe, Cd, Mn, Co, Cu, In, Ag and Sb are present in solid solutions formed through direct cation substitution as Zn2+ ↔ (Fe2+, Cd2+, Mn2+, Co2+) and coupled substitution as Zn2+ ↔ Cu+ + In3+ and Zn2+ ↔ Ag+ + Sb3+; 2) Pb, Bi, Sn and Te may be intimately associated with galena and Sn-bearing telluride inclusions hosted by sphalerite. The characteristics of trace and minor elements, along with the results of sulfur isotope studies, suggest that: 1) the ore forming temperature of Bayan qagan dongshan deposit gradually decreases and the silver mineralization mainly occurred in the late stage; 2) the changes of physicochemical conditions (e.g., temperature and pressure) are likely to be an important depositional mechanism for Ag in the Bayan qagan dongshan deposit; 3) the Bayan qagan dongshan deposit may belong to magmatic-hydrothermal origin.

Mineral evolution and mineral niches of ammonium sulfates: The case of Pastora mine, Aliseda, Spain

Abstract The uncommon association of ammonium sulfates identified in the Pastora abandoned mine is the result of a complex mineral evolution. By means of dissolution-(re)crystallization reactions operating during long periods of time, ammonium minerals “adapt” to local spatiotemporal changes in physico-chemical conditions. We found that during such an evolution, seasonal variations in temperature and humidity, the relative solubility of mineral species, and the presence of organic matter play an important role. In addition, our study shows the existence of “mineral niches” and “mineral seasonality,” which can be explained on the basis of the “mineral ecology” concept introduced by Hazen et al. (2015). Our investigation of the formation of hydrated sulfates, particularly of ammonium sulfates, might be of importance for identifying the existence of life in mineral formation environments.