Cesium Lead Halide Perovskite Research Articles

Effect of Mn2+ Doping and DDAB-Assisted Postpassivation on the Structural and Optical Properties of CsPb(Cl/Br)3 Halide Perovskite Nanocrystals.

Cesium lead halide perovskite (CsPbX3; X = Cl, Br, I) nanocrystals showing intense band-edge emission and high photoluminescence quantum yield are known to be a potential candidate for application in optoelectronic devices. However, controlling toxicity due to the presence of Pb2+ in lead-based halide perovskites is a major challenge for the environment that needs to be tackled cautiously. In this work, we have partially replaced Pb2+ with Mn2+ ions in the CsPb(Cl/Br)3 nanocrystals and investigated their impact on the structural and optical properties. The Rietveld refinement shows that CsPbCl2Br nanocrystals possess a cubic crystal structure with Pm3 ̅m space group, the Mn2+ doping results in the contraction of the unit cell. The CsPb(Cl/Br)3: Mn nanocrystals show a substantial change in the optical properties with an additional emission band at ~588 nm through a d-d transition, changing the emission color from blue to pink. Here, a didodecyldimethylammonium bromide (DDAB) ligand that triggers both anion and ligand exchange in the CsPb(Cl/Br)3: Mn nanocrystals have been used to regulate the exchange reaction and tune the emission color of halide perovskites by changing the peak position and the PL intensities of band-edge and Mn2+ defect states. We have also shown that oleic acid helps in the desorption of oleylamine capping from the CsPb(Cl/Br)3: Mn nanocrystal surfaces and DDAB, resulting in the substitution of Cl¯ with Br¯ as well as provides capping with shorter branched length ligand which led to increase in the overall PL intensity by many folds.

Surface Structure of Lecithin-Capped Cesium Lead Halide Perovskite Nanocrystals Using Solid-State and Dynamic Nuclear Polarization NMR Spectroscopy.

Inorganic colloidal cesium lead halide perovskite nanocrystals (NCs) encapsulated by surface capping ligands exhibit tremendous potential in optoelectronic applications, with their surface structure playing a pivotal role in enhancing their photophysical properties. Soy lecithin, a tightly binding zwitterionic surface-capping ligand, has recently facilitated the high-yield synthesis of stable ultraconcentrated and ultradilute colloids of CsPbX3 NCs, unlocking a myriad of potential device applications. However, the atomic-level understanding of the ligand-terminated surface structure remains uncertain. Herein, we use a versatile solid-state nuclear magnetic resonance (NMR) spectroscopic approach, in combination with dynamic nuclear polarization (DNP) and atomistic molecular dynamics (MD) simulations, to explore the effect of lecithin on the core-to-surface structures of CsPbX3 (X = Cl or Br) perovskites, sized from micron to nanoscale. Surface-selective (cross-polarization, CP) solid-state and DNP NMR (133Cs and 207Pb) methods were used to differentiate the unique surface and core chemical environments, while the head-groups {trimethylammonium [-N(CH3)3+] and phosphate (-PO4-)} of lecithin were assigned via 1H, 13C, and 31P NMR spectroscopy. A direct approach to determining the surface structure by capitalizing on the unique heteronuclear dipolar couplings between the lecithin ligand (1H and 31P) and the surface of the CsPbCl3 NCs (133Cs and 207Pb) is demonstrated. The 1H-133Cs heteronuclear correlation (HETCOR) DNP NMR indicates an abundance of Cs on the NC surface and an intimate proximity of the -N(CH3)3+ groups to the surface and subsurface 133Cs atoms, supported by 1H{133Cs} rotational-echo double-resonance (REDOR) NMR spectroscopy. Moreover, the 1H-31P{207Pb} CP REDOR dephasing curve provides average internuclear distance information that allows assessment of -PO4- groups binding to the subsurface Pb atoms. Atomistic MD simulations of ligand-capped CsPbCl3 surfaces aid in the interpretation of this information and suggest that ligand -N(CH3)3+ and -PO4- head-groups substitute Cs+ and Cl- ions, respectively, at the CsCl-terminated surface of the NCs. These detailed atomistic insights into surface structures can further guide the engineering of various relevant surface-capping zwitterionic ligands for diverse metal halide perovskite NCs.

Optoelectronic and Morphological Surface Resistance Evaluation of Laser-Induced Graphene Counter Electrodes for Potential Applications in Cesium Lead Halide Perovskite Solar Cells

Optoelectronic and Morphological Surface Resistance Evaluation of Laser-Induced Graphene Counter Electrodes for Potential Applications in Cesium Lead Halide Perovskite Solar Cells

Evolution of structural dynamics in cesium lead halide perovskite colloidal nanocrystals from temperature-controlled synthesis.

Halide perovskite nanocrystals are at the forefront of materials research due to their remarkable optoelectronic properties and versatile applications. While their lattice structure and optical properties have been extensively investigated for the structure-property correlation, their lattice dynamics, the physical link between the lattice structure and optoelectronic properties, has been much less visited. We report the evolution of structural dynamics of a series of cesium lead halide perovskite nanocrystals whose size and morphology are systematically varied by synthesis temperature. Low-frequency Raman spectroscopy uncovers the nanocrystals' structural dynamics, including a relaxational spectral continuum from ligand librations and a phonon spectrum evolving with nanocrystal size. As the size of nanocrystals increases, their phonon spectrum becomes more intense, and their spectral weights redistribute with new first- and second-order modes being activated. The linewidth of the observed phonon modes generally broadens as the nanocrystal grows larger, an interesting deviation from the established phonon confinement model. We suggest that strong confinement and truncation of the lattice and ligands anchoring on the surface might lead to pinning of the lattice dynamics at nanoscale. These findings offer new insights into the bulk-nano-transition in halide perovskite soft semiconductors.

Red-Emitting CsPbI3/ZnSe Colloidal Nanoheterostructures with Enhanced Optical Properties and Stability.

Producing heterostructures of cesium lead halide perovskites and metal-chalcogenides in the form of colloidal nanocrystals can improve their optical features and stability, and also govern the recombination of charge carriers. Herein, the synthesis of red-emitting CsPbI3/ZnSe nanoheterostructures is reported via an insitu hot injection method, which provides the crystallization conditions for both components, subsequently leading to heteroepitaxial growth. Steady-state absorption and photoluminescence studies alongside X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis evidence on a type-I band alignment for CsPbI3/ZnSe nanoheterostructures, which exhibit photoluminescence quantum yield of 96% due to the effective passivation of surface defects, and an enhancement in carrier lifetime. Furthermore, the heterostructure growth of ZnSe domains leads to significant improvement in the stability of the CsPbI3 nanocrystals under ambient conditions and against thermal and UV irradiation stress.

Hot-Injection Synthesis of Cesium Lead Halide Perovskite Nanowires with Tunable Optical Properties.

Metal halide perovskite semiconductors have emerged as promising materials for various optoelectronic applications due to their unique crystal structure and outstanding properties. Among different forms, perovskite nanowires (NWs) offer distinct advantages, including a high aspect ratio, superior crystallinity, excellent light absorption, and carrier transport properties, as well as unique anisotropic luminescence properties. Understanding the formation mechanism and structure-property relationship of perovskite NWs is crucial for exploring their potential in optoelectronic devices. In this study, we successfully synthesized all-inorganic halide perovskite NWs with high aspect ratios and an orthorhombic crystal phase using the hot-injection method with controlled reaction conditions and surface ligands. These NWs exhibit excellent optical and electrical properties. Moreover, precise control over the halogen composition through a simple anion exchange process enables the tuning of the bandgap, leading to fluorescence emission, covering a wide range of colors across the visible spectrum. Consequently, these perovskite NWs hold great potential for efficient energy conversion and catalytic applications in photoelectrocatalysis.

Stress-induced phase stability and optoelectronic property changes in cesium lead halide perovskites

Over the past decade, the certified power conversion efficiency of perovskite solar cells (PSCs) has increased to 26.1%. However, phase instability originating from lattice strains, has limited their commercialization. Strains will inevitably be generated during the PSC fabrication and service process due to the “soft lattice” nature of halide perovskites. In particular, flexible PSCs are subjected to not only mechanical tensile and compressive loads, but also suffer from thermal stresses. In this study, strain-induced changes in the phase stability and the corresponding optoelectronic properties of CsPbI3−xBrx (CsPbI3, CsPbBr3, and CsPbI2Br) systems under tensile and compressive stresses were investigated using first-principles calculations. The results showed that compressive stresses reduce the bandgap value and increase the light absorption coefficient; thus, the optoelectronic performance is improved, whereas the light absorption coefficient decreases regardless of how the bandgap changes under tensile stresses. Moreover, under the same stress, the tensile strain value was twice that of the compressive strain, and the critical value of the transition from the cubic to tetragonal phase was lower, indicating that phase stability was worse under tensile stresses. Therefore, during the fabrication of PSCs, the tensile stress state should be adjusted to the compressive stress state, which is favorable for enhancing PSCs photovoltaic performance and phase stability. The results not only provide direct evidence of tensile and compressive strains influencing the phase stability and optoelectronic property changes in halide perovskites, but also highlight lattice-strain tailoring for the composition design, process optimization, and interface engineering of efficient and stable PSCs.

Efficiently green-emitting and ultra-stable CsPbBr3@SiO2 nanocomposites for white light-emitting diodes

Inorganic oxide especially SiO2 encapsulation strategy is an effective way to improve the stability of all-inorganic cesium lead halide perovskite (CsPbX3, X = Cl, Br, I) nanocrystals (NCs). However, when CsPbX3 NCs are encapsulated in SiO2 by in situ tetraethyl orthosilicate (TEOS) hydrolysis, the unavoidable by-products (water and ethanol) of TEOS hydrolysis commonly damage the structural and optical properties of the CsPbX3 NCs. Herein, TDPA-CsPbBr3 NCs with the dense tetradecylphosphonic acid (TDPA) passivation were pre-prepared and subsequently encapsulated into SiO2 via in situ TEOS hydrolysis. Benefitting from the dense phosphonic passivation layer capable of resisting the erosion of polar by-products generated by TEOS hydrolysis, the obtained TDPA-CsPbBr3@SiO2 nanocomposites maintain the excellent optical properties of the colloidal CsPbBr3 NCs, showing near-unity photoluminescence quantum yield (PLQY) and ultra-narrow full width at half maximum (FWHM). Furthermore, the TDPA-CsPbBr3@SiO2 nanocomposites exhibit outstanding stability against ethanol, UV light, and heating treatment due to the dual protection of dense phosphonate ligand layers and inorganic SiO2 matrix. The white light-emitting diodes (WLED) device was fabricated by sequentially depositing green-emitting TDPA-CsPbBr3@SiO2 nanocomposites and red-emitting K2SiF6:Mn on blue-emitting GaN LED chip. The obtained WLED exhibits excellent luminous performances with standard white emission of CIE Coordinates (0.33, 0.33), a color gamut 138 % of the NTSC and 103 % of Rec. 2020, respectively. This study demonstrates that TDPA-CsPbBr3@SiO2 nanocomposites have a potential application in solid-state lighting and backlight displays.

Harnessing Pb-S Interactions for Long-Term Water Stability in Cesium Lead Halide Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (LHP NCs) have garnered attention as promising light-harvesting materials for optoelectronics and photovoltaic devices, attributed to their impressive optoelectronic properties. However, their susceptibility to moisture-induced degradation has hindered their practical applications. Despite various encapsulation strategies, challenges persist in maintaining their stability and optoelectronic performance simultaneously. Here, a ligand exchange approach is proposed using (11-mercaptoundecyl)-N,N,N-trimethylammonium bromide (MUTAB) to enhance the stability and dispersibility of CsPbBr3 (CPB) NCs in aqueous environments. MUTAB enables effective surface passivation of the CPB NCs via robust Pb-S interactions at the S-terminal while concurrently directing water molecules through the unbound cationic N-terminal or vice versa, ensuring water dispersibility and stability. Spectroscopic analysis confirms retained structural and optical integrity post-ligand exchange. Crucially, MUTAB-bound CPB NCs exhibit sustained charge transfer properties, demonstrated by aqueous colloidal oxidation reactions. This ligand exchange strategy offers a promising pathway for advancing LHP NCs toward practical optoelectronic and photocatalytic applications.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review.

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Selective detection of ascorbic acid by tuning the composition and fluorescence of the cesium lead halide perovskite nanocrystals

Lead halide perovskite nanocrystals (PNCs) have attracted intense attention due to their excellent optoelectronic properties. In this work, a series of water-stable CsPb(Br/I)3 PNCs fluorescent probes were prepared using an anion exchange method. It was found that the PNCs probes could be used to detect ascorbic acid (AA) in water, and interestingly, the FL spectra of the PNCs probes can be adjusted by controlling the concentration of KI in anion exchange to improve the detection selectivity of AA. The high sensitivity and selectivity make CsPb(Br/I)3 PNCs an ideal material for AA sensing. The concentration of AA can be linearly measured in the range from 0.01 to 50 μM, with a detection limit of 4.2 nM. The reason for the enhanced FL of CsPb(Br/I)3 PNCs was studied, and it is considered that AA causes the aggregation of CsPb(Br/I)3 PNCs. This strategy of improving the selectivity of the probe to the substrate by adjusting the spectrum will significantly expand the application of PNCs in the field of analysis and detection.

Advancements in perovskite solar cell efficiency through blade coating techniques and post-treatment optimization

Addition of lead chloride (PbCl2) improves the crystallization kinetics of perovskites by suppressing the formation of δ-phase during large-area perovskite film fabrication. However, this addition results in formation and accumulation of lead iodide (PbI2) platelet atop the film, which adversely affects carrier transport. To eliminate the negative effect of PbI2 accumulation and simultaneously obtain a dense, mirror-like perovskite film, a post-treatment method involving blade coating formamidinium iodide (FAI) under air atmosphere is used. Instead of being washed away, as reported in literatures using spin coating process, PbI2 platelets are converted into cesium lead halide perovskites (CsPbX3) through reaction with Cs and halide present in the original perovskite Cs0.22FA0.78Pb(I0.85Br0.15)3. An efficiency enhancement of (>10%) is achieved by FAI treatment, which does not require fast solvent removal or nitrogen (N2) atmospheres, indicating that FAI blade coating is an effective and straightforward method for the post-treatment of excess PbI2.

Exploring various Integration Methods of carbon quantum dots in CsPbCl3 perovskite solar cells for enhanced power conversion efficiency

In this study, we explore the integration of carbon quantum dots (QDs) in cesium lead halide perovskite solar cells (PSCs) across the electron transport layer (ETL), hole transport layer (HTL), and the perovskite absorber to enhance power conversion efficiency (PCE). We conduct a comprehensive investigation from thin film analysis to complete device characterization, encompassing eight different device topologies. Our results reveal that the integration of QDs in various layers significantly impacts the performance of the PSCs. Notably, adding QDs in the HTL and ETL improves charge transport and reduces recombination, enhancing device efficiency. Furthermore, introducing QDs in the perovskite layer leads to modifications in the energy landscape, reducing charge trapping and enhancing stability. We observe a trade-off between short-circuit current and overall PCE, with different QD integration strategies yielding distinct performance outcomes. Additionally, incorporating QDs in the ETL layer reduces hysteresis, attributed to mitigated ion migration and charge-trapping effects. Overall, the addition of QDs in these layers demonstrates improved charge transport, reduced recombination, and enhanced stability, ultimately contributing to the enhanced performance and efficiency of perovskite solar cells, reaching 22.5%. This study paves the way for future investigations into the potential of QDs in PSC technology and their impact on device forecasting and operational stability.

Surface stability and morphological transformations of CsPbI3

Metal-halide perovskites, particularly inorganic cesium-lead halide perovskites, have emerged as exceptional candidates for several technological applications in the 21st century, such as photovoltaic devices, optoelectronic and photocatalysis. This study systematically investigates the CsPbI3 surfaces through density functional theory (DFT) simulations and morphological analyses. The (001), (110), and (111) surfaces were investigated in terms of their possible terminations (here named α, β, γ, δ and ε), where the relations between their outermost coordination polyhedra, bond lengths, charge distribution, electronic and morphological properties were revealed. The results demonstrate that the (001) and (110) surfaces stand out as the most stables, with Esurf001-α=Esurf110-γ=0.08J/m2. Concerning the electronic properties, it is observed that the (110) and (111) present α terminations with acceptor states, while the β with donor states, making it possible to tune the system semiconducting behavior (n or p-type) via surface termination control. The Wulff construction was employed to show that (001), (110) and (111) surface stabilizations can produce cubic, dodecahedral and octahedral nanocrystal morphologies, respectively. By probing the depths of CsPbI3 surfaces, this research advances new concepts about the design and functionalization of perovskite halide, offering a crucial direction for experimental synthesis strategies.

Effective development and utilization of SILAR-assisted TiO2 and CsPb2Br5 nanocomposites for photochemical and biological cleaning of environment

Recently, cesium lead halide perovskites such as CsPb2Br5 and CsPbBr3 have drawn the attention of researchers because of their unique optical, electronic, and chemical properties. To improve the photo and/or chemical performance of such CsPb2Br5 (termed as CPB hereafter), we have realized multiple facile routes for its combination with UV-active TiO2 nanoparticles. Resultantly developed binary nanocomposites of TiO2, CPB perovskites and TiO2/CPB-nanocomposite (TiO2/CPB-NC) offered a meaningful photochemical contrast between pseudo-successive ionic layer adsorption and reaction (p-SILAR) and electrostatic self-assembly methods for targeting photocatalytic degradation of toxic dyes under solar irradiation and resulted significant performance as reactant for oxygen evolution (OER) as revealed by extensive electrochemical impedance spectroscopy (EIS). In parallel to extensive material-based characterization using SEM, XRD, and UV Vis. etc, the study was further extended to the theoretical investigation of the structure of CsPb2Br5, and antibacterial activity against gram-positive and gram-negative bacteria namely Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). RhB degradation of TiO2 increased from 13% to 58% by deposition of CPB, in parallel to 100% inhition zone growth.

Thickness‐Dependent Microstructural Evolution of CsPbBr3 Nanobricks Induced by Electron Beam Irradiation

All‐inorganic halide perovskites exhibit exceptional optical properties and are promising photoactive materials for optoelectronics. However, their stability remains a key challenge, exacerbated by a limited understanding of degradation mechanisms. Herein, in situ transmission electron microscopy (TEM) is used to investigate the effect of thickness on the structural stability of CsPbBr3 nanobricks under electron beam irradiation. CsPbBr3 nanobricks with different thicknesses have been prepared using a traditional hot‐injection method, giving rise to a distinctive cubic structure. A modulated structure, caused by bromine vacancy ordering, has been observed in the thin nanobricks. The degradation behaviors of nanobricks are related to thickness‐dependent bromine vacancy formation in the CsPbBr3 lattice. More bromine vacancies exist in thin nanobricks than thick ones, resulting in a greater number of undercoordinated Pb atoms which accelerate irradiation‐induced degradation. Decomposition products include Pb nanoparticles, which also demonstrate thickness‐dependent characteristics. TEM images of Pb nanoparticles formed from thin nanobricks show evidence of irradiation‐induced amorphization. In thicker nanobricks, Pb nanoparticle size increases with the duration of electron beam irradiation, while the remaining Cs atoms bond with Br atoms to form relatively stable CsBr nanoparticles. These results contribute to understanding of degradation mechanisms in cesium lead halide perovskites under electron beam irradiation.

Tuning the fluorescence emission of water-stable CsPb(Br/I)3 perovskite nanocrystal probes for naked-eye visual detection of mercury ion

All-inorganic cesium lead halide perovskite nanocrystals (PNCs) have rarely been reported in analytical chemistry, especially in water environment analysis, due to their high susceptibility to environmental conditions. Herein, we investigate and report a method of visual detection of Hg2+ concentration in aqueous solution using CsPb(Br/I)3 PNCs. In this strategy, three kinds of CsPb(Br/I)3 PNCs with FL emission peaks of 551 nm, 591 nm, and 617 nm were used to detect Hg2+, and it was found that Hg2+ can quench the fluorescence of CsPb(Br/I)3 PNCs and blue-shift the maximum FL emission peak. We also found that the Hg2+ concentration has a good linear relationship with the fluorescence quenching rate (I0/I) and FL emission peak shift (Δλ) of CsPb(Br/I)3 PNCs. With the red-shift of the probe FL emission peak, the detected concentration range of Hg2+ gradually expanded. Therefore, the possibility of detecting Hg2+ concentration without huge equipment was detailed by examining the red (R), green (G), and blue (B) values of photographs of CsPb(Br/I)3 PNCs with Hg2+. Under a 365 nm ultraviolet (UV) lamp, the solution color of CsPb(Br/I)3 PNCs emission peaks at 591 nm gradually changes from orange to green with the increase of Hg2+ concentration, which has an excellent visualization effect. The method presented here has the potential to establish a new analytical method for the visual detection of Hg2+ in aqueous environments, and may also facilitate the application of all-inorganic cesium lead halide perovskite nanocrystals for analytical detection in aqueous environments.

Improved photoluminescence stability and defect passivation in SbBr3 post-treated CsPbBr3 quantum dots under ambient conditions.

Inorganic cesium lead halide perovskites have evoked wide popularity because of their excellent optoelectronic properties, high photoluminescence (PL) quantum yield (PLQY), and narrowband emission. Here, cesium lead bromide (CsPbBr3 ) quantum dots (QDs) were synthesized via the ligand-assisted re-precipitation method. Post-synthesis treatment of CsPbBr3 QDs using antimony tribromide improved the PL stability and optoelectronic properties of the QDs. In addition, the PLQY of the post-treated sample was enhanced to 91% via post-treatment, and the luminescence observed was maintained for 8 days. The post-synthesis treatment ensured defect passivation and improved the stability of CsPbBr3 perovskite QDs. High-resolution transmission electron microscopy revealed the presence of more ordered, uniform-sized CsPbBr3 QDs after post-synthesis treatment, and the uniformity of the sample improved as the day passed. The formation of a mixed crystal phase was observed from X-ray diffraction in both as-synthesized, as well as post-treated QDs samples with the possibility of a polycrystalline nature in the post-treated CsPbBr3 QDs as per the selected area electron diffraction pattern. The X-ray photoelectron spectroscopy spectra confirmed the presence of antimony and the possibility of defect passivation in the post-treated samples. These QDs can act as potential candidates in various optoelectronic applications such as photodetectors and light-emitting diodes due to their high PLQY and longer lifetime.

Blue-Emitting Cs(Pb,Cd)Br3 Nanocrystals Resistant to Electric Field-Induced Ion Segregation.

High-performance solution-processed perovskite light-emitting diodes (PeLEDs) have emerged as a good alternative to the well-established technology of epitaxially grown AIIIBV semiconductor alloys. Colloidal cesium lead halide perovskite nanocrystals (CsPbX3 NCs) exhibit room-temperature excitonic emission that can be spectrally tuned across the entire visible range by varying the content of different halogens at the X-site. Therefore, they present a promising platform for full color display manufacturing. Engineering of highly efficient PeLEDs based on bromide and iodide perovskite NCs emitting green and red light, respectively, does not face major challenges except low operational stability of the devices. Meanwhile, mixed-halide counterparts demonstrating blue luminescence suffer from the electric field-induced phase separation (ion segregation) phenomenon described by the rearrangement (demixing) of mobile halide ions in the crystal lattice. This phenomenon results in an undesirable temporal redshift of the electroluminescence spectrum. However, to realize spectral tuning and, at the same time, address the issue of ion segregation less mobile Cd2+ ion could be introduced in the lattice at Pb2+-site that leads to the band gap opening. Herein, we report an original synthesis of CsPb0.88Cd0.12Br3 perovskite NCs and study their structural and optical properties, in particular electroluminescence. Multilayer PeLEDs based on the obtained NCs exhibit single-peak emission centered at 485 nm along with no noticeable change in the spectral line shape for 30 min which is a significant improvement of the device performance.

Limitations and Progresses in Carbon-Based Cesium Lead Halide Perovskite Solar Cells.

Inorganic cesium lead halide perovskites (CsPbIx Br3-x , 0≤x≤3) are promising alternatives with great thermal stability. Additionally, the choice of moisture-resistive and dopant-free carbon as the electrode material can simultaneously solve the problems of stability and cost. Therefore, carbon electrode-based inorganic PSCs (C-IPSCs) represent a promising candidate for commercialization, yet both the efficiencies and stability of related devices demand further progress. This article reviews the recent advancement of C-IPSCs and then unravels the distinctive merits and limitations in this field. Subsequently, our perspective on various modification strategies is analyzed on a methodological level. Finally, this article outlooks the promising research contents and the remaining unresolved issues in this field. We believe that understanding and analyzing the related problems in this field are instructive to stimulate the future development of C-IPSCs.