Centroid Size Research Articles

Differences in the Shape of the Frontal Bone between 20th-Century Euro-Americans and Germans

Geometric morphometrics is a very useful but rarely applied concept in forensic anthropology. It uses information on the shape of an object for data analysis. For this study, geometric morphometrics has been used to compare the shape of the frontal bone between a German and a Euro-American sample (both early 20th century). Results were compared using size-only, shape-only and size-and-shape combined. Results show that the frontal shapes of the two study populations can clearly be distinguished from one another. The best classification results could be achieved when combining size and shape data for analysis. Centroid size showed significant variation by group and sex, and that Euro-Americans are more sex dimorphic than Germans. We conclude that shape data provides a considerable amount of extra information for population affinity estimation, even on a single cranial bone like the frontal. A broader application of geometric morphometrics in forensic anthropology could thus help generating a more reliable biological profile, as well as providing additional insight into German-American morphometric differentiation.

Seasonal dimorphism as an expression of sexual dimorphism: Influence of gonad maturity on the body shape of a rocky intertidal polyplacophoran

Seasonal dimorphism in the body shape of marine invertebrates has been poorly explored compared to vertebrates. We aim to investigate through traditional (body length/width ratio, dorsal elevation ratio and angle of elevation) and geometric (centroid size and shape geometric configurations) morphometrics the effect of gonad maturity (via the gonadosomatic index [GSI] and gonad development stages [GDS]) on changes in body shape in males and females of two latitudinally different populations of the broadcast-spawning intertidal mollusc Chiton articulatus. We confirmed that C. articulatus does not present external sexual dimorphism since sex does not have a significant effect on body shape (1%); instead, dimorphism was seasonal and related to the reproductive season, and varied across populations, probably because in the subtropical zone additional energy is invested in shell (scleritome) bending at the same time as the gonad matures, which is opposite of what occurs in the tropical zone. C. articulatus shows a narrower body shape (i.e., diminished body width) during its gonad maturity compared to the rest of the GDS and is corroborated by a body length/width ratio that contributes the greatest variation in the geometric shape descriptors (18%), just below the centroid size (24%). The expression of centroid size differences shows a correspondence with the change in body dimensions expressed by the three morphometric ratios during gonad maturity. The use of traditional body ratios over time may be useful in polyplacophoran molluscs as a proxy tool to estimate gonad maturity and to provide a reliable indication of the reproductive season.

Phenotypic divergence of Glossina morsitans (Diptera: Glossinidae) populations in Zambia: Application of landmark-based wing geometric morphometrics to discriminate population-level variation.

An important consequence of the discontinuous distribution of insect populations within their geographic range is phenotypic divergence. Detection of this divergence can be challenging when it occurs through subtle shifts in morphological traits with complex geometries, such as insect wing venation. Here, we used landmark-based wing geometric morphometrics to investigate the population-level phenotypic variation of the two subspecies of Glossina morsitans, G. m. centralis Machado and G. m. morsitans Westwood that occur in Zambia. Twelve homologous landmarks digitised on the right wings of 720 specimens collected from four and five sites (80 per site with 1:1 sex ratio) within the G. m. centralis and G. m. morsitans range respectively, were subjected to generalised Procrustes analysis to obtain wing centroid size (CS) and wing shape variables. Linear permutation models and redundancy analysis were then used to compare CS and wing shape between male and female G. morsitans, the two subspecies G. m. centralis and G. m. morsitans, the sexes of each subspecies and between sample locations within each subspecies range, respectively. Significant differences in CS and wing shape were observed between G. morsitans sexes, subspecies and sample locations within each subspecies range. A neighbour-joining cladogram derived from the analysis of Procrustes distances showed that tsetse within each subspecies range were highly divergent. We conclude that G. morsitans populations in Zambia exhibit significant population-level variation in fly size and wing shape which suggests high levels of population structuring. The main drivers of this structuring could be random genetic drift in G. m. centralis demes and local adaptation to environmental conditions in G. m. morsitans populations. We therefore recommend molecular studies to estimate the levels of gene flow between these populations and identify possible barriers to genetic flow.

Can microplastic contamination affect the wing morphology and wingbeat frequency of Aedes aegypti (Diptera: Culicidae) mosquitoes?

Microplastics (MPs) are increasingly widespread in the environment, which raises questions about their potential effects at different biological levels. It is essential to assess the impacts on biodiversity, and it is also crucial to understand whether the presence of MPs can interfere with the biological traits of species of relevance in public health. Considering that the life-history traits of mosquitoes, such as size and the wingbeat frequency (WBF), are related to its vector competence, here, we study the effects of 106 particles L-1 (as expected concentration of MPs on the environment, using the polyethylene type) on WBF, as well as wing morphology, testing the Culicidae species found across all continents, Aedes aegypti, as an indicator. Results show that larvae survival and development were not affected by the tested concentration of MP. Geometric morphometrics showed some asymmetry in female mosquito wings, which were also smaller for individuals reared in MP suspension. As for WBF, results did not indicate any significant differences between females. Male mosquitoes, however, showed alterations in WBF and wing morphology, suggesting possible sex-specific reactions to microplastic exposure. Also, the combination of morphological parameters analyzed as covariates (wing centroid size and body weight) did not significantly affect WBF for both female and male mosquitoes. Overall, this study shows an inaugural investigation of the effects of MP on wing size and WBF on Ae. aegypti, shedding light on these parameters tested for a current pollution issue and its impact on a virus vector.

3D Head Shape Feature Analysis of Zika-Infected Children.

Congenital Zika syndrome (CZS) has been identified a constellation of congenital anomalies caused by Zika Virus (ZKV) infection during pregnancy. The infection with ZKV could lead to microcephaly of the fetus due to a severe decrease in brain volume and reduced brain growth. The preliminary screening of CZS is based on measuring head circumference; the diagnosis is made if this measurement is below two standard deviations below the mean. The analyses of the 3D head features of infected infants are limited. This study analyzed 3D head images of 35 ZKV-positive cases with an average age of 16.8 ± 2 months and 35 controls with an average age of 14.4 ± 5 months. This study focused on identifying potential diagnostic characteristics of CZS. The 3D head images were captured using a 3D imaging system. The averaged images of the two groups were aligned to illustrate the size and shape differences. There were significant differences in centroid size, head circumference (HC), head height (HH), and chin height (CH) between the two groups. We also identified significant differences in the indices of chin height/total facial height (CH/TFH) and head height/head circumference ratio (HH/HC) between the CZS and control cases. An HH/HC of 0.49 showed a sensitivity of 0.86 and a specificity of 0.74 in diagnosing CZS, which is more sensitive than the routinely used HC measurement. The index of HH/HC has potential to be used as the gold standard for the early screening for the detection of CZS cases.

Analisis Perbedaan Antropometri Vertebra Thorax (T12) antar Kelompok Usia dengan Menggunakan Image CT Scan: Pendekatan Teknik Geometric Morphometric

The role of forensic anthropology is to identify the unknown skeletal remains to assiss in criminal investigation. Age estimation is one of the essential aspects of individual identification. Geometric morphometric is a technique to quantify the morphological of an object using the Cartesian coordinates of anatomical landmarks. There were no studies doing on the T12 vertebra for identification purposes using geometric morphometric techniques. This is an analytic observational study with a retrospective cross sectional study design. Samples were taken from 100 CT scan images at Radiology departemetnt of Dr Kariadi hospital. The age groups as independent variable, while both centroid size which represent the size and Principal component (PCs) which represent the size as the dependent variable. The differences between age group were analyzed using one way ANOVA test. There was a significant difference between age groups in the size of the T12 vertebra with p value = 0.003 (p<0.05). There was no significant difference in size between age groups in size, with p value = 0,149 (p>0,05). Using the Geometric morphometric approach, the vertebra T12 showed significant difference in size.

Exploring Skull Shape Variation and Allometry Across Different Chicken Breeds

This study investigates skull shape variation and allometry among three different chicken breeds: Broiler, Lohman Brown, and Leghorn. Geometric morphometric analysis was employed to analyze skull morphology, focusing on facial bones and the neurocranium. The study aims to understand how skull shape differs between these breeds and how it relates to size variation. Results show significant differences in skull morphology among the chicken breeds. Broiler chickens exhibit a distinct skull shape, characterized by a more rounded head and a higher neurocranium compared to the other breeds. In contrast, Lohman Brown and Leghorn chickens show similarities in skull shape, with a more elongated appearance. Broiler chickens were found to be the smallest among the breeds studied, with statistical analysis confirming their distinguishability based on centroid size. In contrast, Lohman Brown and Leghorn chickens exhibited similar sizes, with no significant difference between them. Allometric analysis reveals that skull shape changes with size, particularly in the neurocranium and facial bones. These findings suggest that evolutionary adaptations and breeding practices have influenced the skull morphology of these chicken breeds. Overall, this study provides insights into the skull shape variation and allometry of different chicken breeds, highlighting the importance of considering both genetic and environmental factors in understanding morphological diversity in poultry.

Geometric Morphometrics and Genetic Diversity Analysis of Chalcidoidea (Diglyphus and Pachyneuron) at Various Elevations.

Eulophidae and Pteromalidae are parasitic wasps with a global distribution and import for the biological control of pests. They can be distributed in different altitude regions, but their morphological and genetic adaptations to different altitudes are unclear. Here, we collected specimens that belong to Eulophidae and Pteromalidae from various altitudinal gradients, based on integrated taxonomic approaches to determine the species composition, and we analyzed their body shape and size from different altitudes using geometric morphometrics. Then, we performed an analysis of the D. isaea population's haplotype genes to illustrate their genetic diversity. As a result, eight species that belong to two genera, Diglyphus Walker (Eulophidae) and Pachyneuron Walker (Pteromalidae), were identified, including two newly recorded species from China (D. chabrias and D. sabulosus). Through a geometric morphometrics analysis of body shape, we found that a narrow forewing shape and a widened thorax are the significant characteristics of adaptation to high-altitude environments in D. isaea and P. aphidis. Additionally, the body size studies showed a principal relationship between centroid size and altitude; the size of the forewings and thorax increases at higher altitudes. Next, using haplotype analysis, 32 haplotypes were found in seven geographic populations with high genetic diversity of this species. Our research provides preliminary evidence for the morphological and genetic diversity adaptation of parasitic wasps to extreme environments, and these data can provide important references for investigations on the ecological adaptability of parasitic wasps.

Integrative studies of Microtus hartingi and Microtus guentheri (Cricetidae, Arvicolinae) and taxonomic problem of Microtus elbeyli

In this study, Taxonomic differences between Microtus guentheri and Microtus hartingi, which are similar in terms of external morphological features, were determined using linear morphometric, geometric morphometric, karyological and molecular analyses methods. Through classical morphometric (mean values) and geometric morphometric analyses of craniodental and mandible characters, influenced by various genetic, developmental, and functional processes, it was found that M. hartingi and M. guentheri exhibited notable differences in both mean linear measurements and shape. The Jackknife in classical morphometric analyses of samples, which underwent molecular and karyological species diagnoses, was higher than 88 % for each character. In geometric morphometric analyses, the Procrustes distance for shape follows the order Ventral < Dorsal < Mandible < M3<M2<M1. Based on cross-validation, the accurate classification rate is between 73 and 100 %. In both mean linear measurements and centroid size, M. hartingi specimens exhibited significantly larger mandibles and craniodentals compared to individuals of M. guentheri. According to PLS results, there was a significant relationship between the shape of M1, M2 and M3 and environmental variables, while the relationship between their size and environmental variables was not significant. However, neither the shape nor the size of the other parts had an sufficient relationship with environmental variables. Both species exhibited karyological similarity with a chromosome number of 2n = 54, but display polymorphism in chromosome arm number. There were differences in the C-banding of autosomal chromosomes and X chromosome. The classification of species in classical and geometric morphometric analyses, diverges from the outcomes of karyological and molecular assessments. In both species, the intraspecific genetic distance remained below 1.35 %. The cyt-b exhibits significant differentiation between the two species (K2P = 6.55 %). The divergence time for M. guentheri from the clade containing M. hartingi + M. qazvinensis + Microtus dogramacii was estimated to be 0.73 million years ago. Since no sample of Microtus elbeyli with karyological and cyt-b characteristics was found in the samples taken from the type locality, the taxonomic status of M. elbeyli remains unclear.

Size and shape of the neurocranium of laying chicken breeds

The neurocranium in birds provides valuable insights into their morphological diversity, including adaptations related to brain size, facial shaping, and environmental factors. This study analyzes the neurocranial shape characteristics and size of chickens with similar genetic backgrounds. By examining the neurocranial shape variation in chickens of the same age and sex, the study aims to understand the factors contributing to morphological diversity within this specific group. 3D geometric morphometrics was used to analyze 235 neurocrania from four chicken breeds. The analysis revealed significant differences in centroid size among the chicken breeds. The largest neurocranium centroid size was found in Sasso chickens., which were statistically separated from Atak-S. Additionally, centroid size effectively differentiates between Lohmann Brown and Lohmann Sandy chicken breeds.The most significant shape variation concerned the width of the rostral part of the frontal bone. However, according to the PC1 value, the shape variation was observed within rather than between groups. Lohmann Sandy chickens exhibited higher variability in neurocranial shape, suggesting greater shape diversity within this breed than others. As for shape analysis, the breeds showed closer similarity to each other. Lohmann Sandy chickens are characterized by positive PC1 value, with the rostral end of the frontal region inclined more ventrally, and a more extensive basioccipital region. Sasso chickens have a more dome-shaped middle part of the frontal region than other breeds. The study also identified the most significant shape variation among the study samples, observed at the rostral part of the frontal bone. These findings contribute to understanding the genetic and environmental influences shaping neurocranial morphology in chickens. Similar studies in different bird species and subspecies offer valuable insights into avian biology and adaptation.

A novel approach to craniofacial analysis using automated 3D landmarking of the skull

Automatic dense 3D surface registration is a powerful technique for comprehensive 3D shape analysis that has found a successful application in human craniofacial morphology research, particularly within the mandibular and cranial vault regions. However, a notable gap exists when exploring the frontal aspect of the human skull, largely due to the intricate and unique nature of its cranial anatomy. To better examine this region, this study introduces a simplified single-surface craniofacial bone mask comprising of 6707 quasi-landmarks, which can aid in the classification and quantification of variation over human facial bone surfaces. Automatic craniofacial bone phenotyping was conducted on a dataset of 31 skull scans obtained through cone-beam computed tomography (CBCT) imaging. The MeshMonk framework facilitated the non-rigid alignment of the constructed craniofacial bone mask with each individual target mesh. To gauge the accuracy and reliability of this automated process, 20 anatomical facial landmarks were manually placed three times by three independent observers on the same set of images. Intra- and inter-observer error assessments were performed using root mean square (RMS) distances, revealing consistently low scores. Subsequently, the corresponding automatic landmarks were computed and juxtaposed with the manually placed landmarks. The average Euclidean distance between these two landmark sets was 1.5 mm, while centroid sizes exhibited noteworthy similarity. Intraclass coefficients (ICC) demonstrated a high level of concordance (> 0.988), with automatic landmarking showing significantly lower errors and variation. These results underscore the utility of this newly developed single-surface craniofacial bone mask, in conjunction with the MeshMonk framework, as a highly accurate and reliable method for automated phenotyping of the facial region of human skulls from CBCT and CT imagery. This craniofacial template bone mask expansion of the MeshMonk toolbox not only enhances our capacity to study craniofacial bone variation but also holds significant potential for shedding light on the genetic, developmental, and evolutionary underpinnings of the overall human craniofacial structure.

A geometric morphometric analysis of wing variations in shape and size of the blue bottle fly, Calliphora vicina (Diptera: Calliphoridae).

A geometric morphometric analysis was performed on the right wing of adult Calliphora vicina (Robineau-Desvoidy) collected across 4 altitudinal levels in Sicily. The objective of this study was to assess differences in shape and centroid size (CS) between females and males and across elevations. The wings analyzed in this study were removed from adults of C. vicina collected with baited traps at 20, 700, 1,153, and 1,552; for this study, 19 landmarks were identified in each wing. The coordinates of the landmarks were aligned and superimposed to prevent variations due to position, orientation, and scale; they were then scaled to the same CS and recentered. CS and Procrustes differences were, respectively, used to assess variations in size and shape. Significant differences were observed in wing shape between males and females but not between all altitudinal levels. Female wings were found to be significantly larger than males (P < 0.01). Wings of flies collected at the highest altitudinal level resulted in significantly larger wings than those collected at lower altitudes (P < 0.001), with CS values ranging from 12.1 to 14.1. Variation in wing shape can impact thermal regulation, and therefore, oxygen content, temperature, atmospheric pressure, and solar radiation can have an effect on an insect's body and activity levels. At high elevations and lower temperatures, larger wings could mean less energy expenditure when flying to increase body temperature.

A 3D geometric morphometric analysis of the bovid distal humerus, with special reference to Rusingoryx atopocranion (Pleistocene, Eastern Africa).

The family Bovidae [Mammalia: Artiodactyla] is speciose and has extant representatives on every continent, forming key components of mammal communities. For these reasons, bovids are ideal candidates for studies of ecomorphology. In particular, the morphology of the bovid humerus has been identified as highly related to functional variables such as body mass and habitat. This study investigates the functional morphology of the bovid distal humerus in isolation due to its increased likelihood of preservation in the fossil record, and the resulting opportunity for a better understanding of the ecomorphology of extinct bovids. A landmark scheme of 30 landmarks was used to capture the 3D distal humerus morphology in 111 extant bovid specimens. We find that the distal humerus has identifiable morphologies associated with body mass, habitat preference and tribe affiliation and that some characteristics are shared between high body mass bovids and those living on hard, flat terrain which is likely due to the high stress on the bone in both cases. We directly apply our findings regarding extant bovids to the extinct alcelaphine bovid, Rusingoryx atopocranion from the mid to late Pleistocene (>33-45 ka) Lake Victoria region of Kenya. This species is known for some peculiar morphologies including a domed cranium with hollow nasal crests, and having small hooves for a bovid of its size. Another interesting aspect of Rusingoryx's skeletal morphology which has not been addressed is an unusual protrusion on the lateral epicondyle of the distal humerus. Despite considerable individual variation in the Rusingoryx specimens, we find evidence to support its historical assignment to the tribe Alcelaphini, and that it likely preferred open grassland habitats, which is consistent with independent reconstructions of the palaeoenvironment. We also provide the most accurate body mass estimate for Rusingoryx to date, based on distal humerus centroid size. Overall, we are able to conclude that the distal humerus in extant bovids is highly informative regarding body mass, habitat preference and tribe, and that this can be applied directly to a fossil taxon with promising results.

Variety is the spice: The role of morphological variation of Triatoma infestans (Hemiptera, Reduviidae) at a macro-scale

Chagas disease is caused by the protozoan parasite Trypanosoma cruzi (Chagas, 1909). One of the primary vectors of T. cruzi in South America is Triatoma infestans (Klug, 1834). This triatomine species is distributed across a huge latitudinal gradient, inhabiting domiciliary , peridomiciliary , and wild environments. Its wide geographic distribution provides an excellent opportunity to study the relationships between environmental gradients and intraspecific morphological variation. In this study, we investigated variations in wing size and shape in T. infestans across six ecoregions. We aimed to address the following questions: How do wing size and shape vary on a regional scale, does morphological variation follow specific patterns along an environmental or latitudinal gradient, and what environmental factors might contribute to wing variation? Geometric morphometric methods were applied to the wings of 162 females belonging to 21 T. infestans populations, 13 from Argentina (n = 105), 5 from Bolivia (n = 42), and 3 from Paraguay (n = 15). A comparison of wing centroid size across the 21 populations showed significant differences. Canonical Variate Analysis (CVA) revealed significant differences in wing shape between the populations from Argentina, Bolivia, and Paraguay, although there was a considerable overlap, especially among the Argentinian populations. Well-structured populations were observed for the Bolivian and Paraguayan groups. Two analyses were performed to assess the association between wing size and shape, geographic and climatic variables: multiple linear regression analysis (MRA) for size and Partial Least Squares (PLS) regression for shape. The MRA showed a significant general model fit. Six temperature-related variables, one precipitation-related variable, and the latitude showed significant associations with wing size. The PLS analysis revealed a significant correlation between wing shape with latitude, longitude, temperature-related, and rainfall-related variables. Wing size and shape in T. infestans populations varied across geographic distribution. Our findings demonstrate that geographic and climatic variables significantly influence T. infestans wing morphology.

Sex and ancestry variation in ulna morphology in an adult South African cadaveric sample

BackgroundSex and/or ancestry estimations based on skeletal elements are vital in forensics, as these variables are key to identification of unknown skeletal remains. Unfortunately, patterns of skeletal variation are often shared between sex and ancestry groups, making independent estimation of such variables less accurate, especially when substantial size differences exist both within and between groups. Geometric morphometric analysis allows isolation of the size component of variation, enabling independent and more sensitive detection of shape variation between groups. This creates the potential for more accurate estimations of sex and ancestry either independently or simultaneously, thus reducing the chances of compounding errors of estimation. This would be especially beneficial in heterogeneous populations, such as that of South Africa, where group separation may be affected by complicated genetic and environmental influences. MethodsThis study assessed sex and ancestry variation in morphology of 1894 ulnae of South African males and females of the country's three largest ancestry groups. Three-dimensional data was submitted to Generalized Procrustes Analysis for superimposition and scaling to a common centroid size. Mean centroid sizes and shapes were compared, and accuracy of sex, ancestry, or sex-ancestry estimation was assessed using Discriminant Function Analysis and leave-one-out cross-validation. Covariation with size, age and year-of-birth were assessed through regression analysis. ResultsMale ulnae were absolutely and proportionally larger than female ulnae, while Black individuals were similarly larger than Colored and White individuals. Based on this variation, sex could be estimated with 68.8 % accuracy, and ancestry with 73.6 % accuracy. Simultaneous sex-ancestry assessment showed similar morphological patterning and yielded a mean classification accuracy of 73.6 %. ConclusionsThese results have practical value for forensic application, where relatively poorly elements such as the ulna are often all that is available for analysis. Additionally, simultaneous estimation of sex and ancestry reduces compounding errors that may arise from first estimating one variable and basing the rest of the biological profile estimations thereon. Such improved estimations are of great potential value, especially in heterogeneous populations such as that of South Africa.

Skull asymmetry in various sheep breeds: Directional asymmetry and fluctuating asymmetry.

Sheep (Ovis aries) play an important role in the economy of Turkey and the Balkan Peninsula due to their use in farming. As a domesticated species, sheep's morphometric and morphological diversity is likely determined by selective breeding practices rather than geographic distribution. This study aimed to analyse four different sheep breed skulls and reveal skull asymmetry using geometric morphometric methods. For this purpose, 2D images of 52 sheep skulls from different breeds were analysed from the dorsal view of the skull, using 28 landmarks. In the comparison of sheep skulls from the dorsal view, the first principal components for directional asymmetry (DA) and fluctuating asymmetry (FA) were 32.98% and 39.62% of the total variation, respectively. Sharri and Ivesi (Awassi) sheep breeds had the broadest distribution of skull shapes among the breeds, while Lara e Polisit was the most conservative breed. DA was used as a measure of biomechanical constraints, and FA was used as an indicator of environmental stress. Consistent with DA, both differences in centroid size and shape between breeds were statistically significant. No differences between males and females related to asymmetry were revealed. Ivesi sheep revealed the highest fluctuating asymmetry. Geometric morphometric methods proved to be a useful tool for distinguishing differences in the shape of the skull of different sheep breeds and also can be useful for taxonomic purposes.

Geographical variation in the forewing shape of the red dwarf honeybees revealed by landmark-based geometric morphometrics

Accurate intraspecific variation assessment is the prerequisite for determining subspecies, evolutionarily significant units, or management units across a species' range. However, intraspecific variation assessment is often hindered by inaccurate morphological results from traditional methods or high-cost genetic analyses. Geometric morphometrics is a promising technique for quantifying and visualising intraspecific diversity. We used landmark-based geometric morphometrics to investigate forewing shape variation and microtaxonomy of populations of Apis florea Fabricius 1787 (Apidae: Apini), which originated from some parts of Asia and Africa based on the 19 landmarks plotted at the venation intersections of forewings. We collected samples of 162 colonies from 36 different localities. On average, 13 workers per colony were analysed (1851 bees in total). Distinct spatial structures and significant differences in wing shape between the studied populations were revealed using canonical variate analysis, and no considerable overlap was detected between the colonies belonging to the western and eastern populations. The populations at higher latitudes showed significantly larger centroid sizes than those at lower latitudes, and a clinal variation in forewing size was confirmed. Significant distance-decay relationships between the studied populations were observed so that the populations located at the maximum geographical distance showed the most significant distance from each other and vice versa. Wing geometric morphometrics was an accurate tool for the reliable estimation of the population structure of the red dwarf honeybees. It is essential to increase the reliability of these variations by combining the results with further molecular data.

Scaling relations for gamma-ray burst afterglow light curves and centroid motion independent of jet structure and dynamics

ABSTRACT Models for gamma-ray burst afterglow dynamics and synchrotron spectra are known to exhibit various scale invariances, owing to the scale-free nature of fluid dynamics and the power-law shape of synchrotron spectra. Since GRB 170817A, off-axis jet models including a lateral energy structure in the initial outflow geometry have gained in prominence. Here, we demonstrate how the scale invariance for arbitrary jet structure and dynamical stage can be expressed locally as a function of jet temporal light-curve slope. We provide afterglow flux expressions and demonstrate their use to quickly assess the physical implications of observations. We apply the scaling expressions to the Swift X-ray Telescope sample, which shows a spread in observed fluxes, binned by light-curve slope at time of observation, that increases with increasing light-curve slope. According to the scaling relations, this pattern is inconsistent with a large spread in environment densities if these were the dominant factor determining the variability of light curves. We further show how the late deep Newtonian afterglow stage remains scale-invariant but adds distinct spectral scaling regimes. Finally, we show that for given jet structure a universal curve can be constructed of the centroid offset, image size, and ellipticity (that can be measured using very large baseline interferometry) versus observer angle, in a manner independent of explosion energy and circumburst density. Our results apply to any synchrotron transient characterized by a release of energy in an external medium, including supernova remnants, kilonova afterglows, and soft gamma-repeater flares.

Influence of insular conditions on wing phenotypic variation in two dominant mosquito vectors, Aedes albopictus and Armigeres subalbatus (Diptera: Culicidae), in the border archipelagos of Thailand.

Insects geographically separated into island and mainland populations often exhibit phenotypic variations, a phenomenon known as insular conditions. These conditions can lead to rapid evolutionary changes that affect the morphological characteristics of mosquito vectors. Nevertheless, studies that specifically examine phenotype differences between island and mainland mosquito populations have been limited. In this study, wing variation in size and shape was investigated using the geometric morphometric (GM) technique in two dominant mosquito vectors, Aedes albopictus and Armigeres subalbatus, in the Ranong and Trat archipelagos of Thailand. Significant differences in average wing centroid size (CS) were found in 6 out of 15 population pairs for Ae. albopictus (p < 0.05) and in 5 population pairs for Ar. subalbatus (p < 0.05). After removing the allometric effect, canonical variate analyses (CVA) based on wing shape analysis revealed overlap across all populations for both Ae. albopictus and Ar. subalbatus. However, the statistical analysis indicated that Ar. subalbatus exhibited wing shape differences across all populations (p < 0.05), and most Ae. albopictus populations also displayed distinct wing shapes (p < 0.05), except for the populations from Chang Island and the mainland of Ranong, which showed no significant differences (p > 0.05). These findings enhance our understanding of mosquito adaptability in island regions and provide valuable data for the surveillance and monitoring of vector evolution.

Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9–73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.