Centriolar Microtubules Research Articles

Cep104 is a component of the centriole distal tip complex that regulates centriole growth and contributes to Drosophila spermiogenesis

Proper centrosome number and function relies on the accurate assembly of centrioles, barrel-shaped structures that form the core duplicating elements of the organelle. The growth of centrioles is regulated in a cell cycle-dependent manner; while new daughter centrioles elongate during the S/G2/M phase, mature mother centrioles maintain their length throughout the cell cycle. Centriole length is controlled by the synchronized growth of the microtubules that ensheathe the centriole barrel. Although proteins exist that target the growing distal tips of centrioles, such as CP110 and Cep97, these proteins are generally thought to suppress centriolar microtubule growth, suggesting that distal tips may also contain unidentified counteracting factors that facilitate microtubule polymerization. Currently, a mechanistic understanding of how distal tip proteins balance microtubule growth and shrinkage to either promote daughter centriole elongation or maintain centriole length is lacking. Using a proximity-labeling screen in Drosophila cells, we identified Cep104 as a novel component of a group of evolutionarily conserved proteins that we collectively refer to as the distal tip complex (DTC). We found that Cep104 regulates centriole growth and promotes centriole elongation through its microtubule-binding TOG domain. Furthermore, analysis of Cep104 null flies revealed that Cep104 and Cep97 cooperate during spermiogenesis to align spermatids and coordinate individualization. Lastly, we mapped the complete DTC interactome and showed that Cep97 is the central scaffolding unit required to recruit DTC components to the distal tip of centrioles.

Novel features of centriole polarity and cartwheel stacking revealed by cryo‐tomography

Centrioles are polarized microtubule‐based organelles that seed the formation of cilia, and which assemble from a cartwheel containing stacked ring oligomers of SAS‐6 proteins. A cryo‐tomography map of centrioles from the termite flagellate Trichonympha spp. was obtained previously, but higher resolution analysis is likely to reveal novel features. Using sub‐tomogram averaging (STA) in T. spp. and Trichonympha agilis, we delineate the architecture of centriolar microtubules, pinhead, and A‐C linker. Moreover, we report ~25 Å resolution maps of the central cartwheel, revealing notably polarized cartwheel inner densities (CID). Furthermore, STA of centrioles from the distant flagellate Teranympha mirabilis uncovers similar cartwheel architecture and a distinct filamentous CID. Fitting the CrSAS‐6 crystal structure into the flagellate maps and analyzing cartwheels generated in vitro indicate that SAS‐6 rings can directly stack onto one another in two alternating configurations: with a slight rotational offset and in register. Overall, improved STA maps in three flagellates enabled us to unravel novel architectural features, including of centriole polarity and cartwheel stacking, thus setting the stage for an accelerated elucidation of underlying assembly mechanisms.

WDR90 is a centriolar microtubule wall protein important for centriole architecture integrity.

Centrioles are characterized by a nine-fold arrangement of microtubule triplets held together by an inner protein scaffold. These structurally robust organelles experience strenuous cellular processes such as cell division or ciliary beating while performing their function. However, the molecular mechanisms underlying the stability of microtubule triplets, as well as centriole architectural integrity remain poorly understood. Here, using ultrastructure expansion microscopy for nanoscale protein mapping, we reveal that POC16 and its human homolog WDR90 are components of the microtubule wall along the central core region of the centriole. We further found that WDR90 is an evolutionary microtubule associated protein. Finally, we demonstrate that WDR90 depletion impairs the localization of inner scaffold components, leading to centriole structural abnormalities in human cells. Altogether, this work highlights that WDR90 is an evolutionary conserved molecular player participating in centriole architecture integrity.

Homogeneous multifocal excitation for high-throughput super-resolution imaging.

Super-resolution microscopies have become an established tool in biological research. However, imaging throughput remains a main bottleneck in acquiring large datasets required for quantitative biology. Here we describe multifocal flat illumination for field-independent imaging (mfFIFI). By integrating mfFIFI into an instant structured illumination microscope (iSIM), we extend the field of view (FOV) to >100 × 100 µm2 while maintaining high-speed, multicolor, volumetric imaging at double the diffraction-limited resolution. We further extend the effective FOV by stitching adjacent images for fast live-cell super-resolution imaging of dozens of cells. Finally, we combine our flat-fielded iSIM with ultrastructure expansion microscopy to collect three-dimensional (3D) images of hundreds of centrioles in human cells, or thousands of purified Chlamydomonas reinhardtii centrioles, per hour at an effective resolution of ~35 nm. Classification and particle averaging of these large datasets enables 3D mapping of posttranslational modifications of centriolar microtubules, revealing differences in their coverage and positioning.

SAS-6 Association with γ-Tubulin Ring Complex Is Required for Centriole Duplication in Human Cells

Centrioles are essential components of centrosome, the main microtubule-organizing center of animal cellsrequired for robust spindle bipolarity [1, 2]. They are duplicated once during the cell cycle [3], and the duplication involves assembly of a cartwheel on the pre-existing centriole followed by assembly of triplet microtubules around the cartwheel [4, 5]. Although the molecular details of cartwheel formation are understood [6-13], the mechanisms initiating the formation of centriolar microtubules are not known. Here, we show that the central component of cartwheel, HsSAS-6 plays a crucial role in the formation of centriolar microtubules by interacting with the microtubule nucleation machinery, γ-tubulin ring complex (γ-TuRC) in human cells. The globular N terminus and the central coiled-coil domain of SAS-6 are required for formation of the cartwheel [7, 14], whereas the function of its C-terminal outer cartwheel region in centriole duplication remains unclear. We find that deletion of HsSAS-6 C terminus disrupts microtubule formation in daughter centriole, and as a result, cells fail to form the new centriole. Consequently, this results in mitotic cells having only two centrioles localized at a single site. Detailed molecular analyses showed that HsSAS-6 interacts with the γ-TuRC proteins and associates with the γ-TuRC at the centrosome, and furthermore, the C terminus isessential for this association. High-resolution microscopy revealed localization of the γ-TuRC protein, γ-tubulin as multiple lobes surrounding the HsSAS-6-containing central hub in the centriole. Together, theresults indicate that HsSAS-6 regulates centriolar microtubule assembly by anchoring γ-TuRCs to the pro-centriole at the onset of daughter centriole formation.

Sperm Ultrastructure of corydalid Corydalus diasi Navás (Megaloptera, Neuropterida, Insecta) with phylogenetic considerations

AbstractSpermatozoa of the Megaloptera Corydalus diasi (Corydalidae) showed a two‐layered acrosome, similar to Raphidioptera, but different from the acrosomal arrangement in Ascalaphidae, Coniopterygidae and Myrmeleontidae (Neuroptera families) and Sialidae (Megaloptera). Also, the acrosomal shape differs from both Raphidioptera and Neuroptera examined so far. The nucleus is cylindrical with condensed chromatin, resembling the sperm of Sialidae, Raphidioptera and Neuroptera. The transition region of C. diasi does not have the nucleus surrounded by centriolar microtubules, and thus, it differs from Sialidae, whose character has been previously considered a synapomorphy between Megaloptera and Raphidioptera. The flagella analysed here possess a 9 + 9 + 2 axoneme arrangement, two elongated circular mitochondrial derivatives and triangular accessory bodies, which are also reported in Raphidioptera. In summary, there are numerous sperm differences between Corydalidae and Sialidae, besides several characters shared between Corydalidae and Raphidioptera. However, several of these similarities appear to be plesiomorphisms rather than synapomorphies. Additionally, this is the first spermatic description for Corydalidae and the second for Megaloptera order. Therefore, considering the number of genres that comprise this family and the lack of spermiocladistics studies for Corydalidae, we recommended that new studies on the field should be performed to better understand the sperm pattern within the Corydalidae genus.

Cep128 associates with Odf2 to form the subdistal appendage of the centriole.

The mother centriole in a cell has two appendages, the distal appendage (DA) and subdistal appendage (SDA), which have roles in generating cilia and organizing the cellular microtubular network, respectively. In the knockout (KO) cells of Odf2, the component of the DA and SDA, both appendages simultaneously disappear. However, the molecular mechanisms by which the DA and SDA form independently but close to each other downstream of Odf2 are unknown. Here, using super-resolution structured illumination microscopy (SR-SIM), we found that the signal for GFP-tagged Odf2 overlapped considerably with that of immunofluorescently labeled Cep128. We further found that Cep128 knockdown (KD) caused the dissociation of other SDA components from the centriole, including centriolin, Ndel1, ninein and Cep170, whereas Odf2 was still associated with the centriole. In contrast, the DA components remained associated with the centriole in Cep128 KD cells. Consistent with this observation, we identified Cep128 as an Odf2-interacting protein by immunoprecipitation. Taken with the finding that Cep128 deletion decreased the stability of centriolar microtubules, our results indicate that Cep128 associates with Odf2 in the hierarchical assembly of SDA components to elicit the microtubule-organizing function.

Centriolar CPAP/SAS-4 Imparts Slow Processive Microtubule Growth

SummaryCentrioles are fundamental and evolutionarily conserved microtubule-based organelles whose assembly is characterized by microtubule growth rates that are orders of magnitude slower than those of cytoplasmic microtubules. Several centriolar proteins can interact with tubulin or microtubules, but how they ensure the exceptionally slow growth of centriolar microtubules has remained mysterious. Here, we bring together crystallographic, biophysical, and reconstitution assays to demonstrate that the human centriolar protein CPAP (SAS-4 in worms and flies) binds and “caps” microtubule plus ends by associating with a site of β-tubulin engaged in longitudinal tubulin-tubulin interactions. Strikingly, we uncover that CPAP activity dampens microtubule growth and stabilizes microtubules by inhibiting catastrophes and promoting rescues. We further establish that the capping function of CPAP is important to limit growth of centriolar microtubules in cells. Our results suggest that CPAP acts as a molecular lid that ensures slow assembly of centriolar microtubules and, thereby, contributes to organelle length control.

Basal body structure in Trichonympha.

Trichonympha is a symbiotic flagellate of many species of termites and of the wood-feeding cockroach. Remarkably, this unicellular organism harbors up to over ten thousand flagella on its surface, which serve to propel it through the viscous environment of the host hindgut. In the 1960s, analysis of resin-embedded Trichonympha samples by electron microscopy revealed that the basal bodies that give rise to these flagella are exceptionally long, with a proximal, cartwheel-bearing, region some 50 times longer than that of regular centrioles. In recent years, this salient feature has prompted the analysis of the 3D architecture of Trichonympha basal bodies in the native state using cryo-electron tomography. The resulting ~40 Å resolution map of the basal body proximal region revealed a number of novel features that may be conserved in centrioles of other systems. These include proximal–distal polarity of the pinhead structure that links the cartwheel to centriolar microtubules, as well as of the linker between the A and the C microtubules. Moreover, this work demonstrated that the cartwheel is made of stacked ring-like structures that likely each comprise 18 molecules of SAS-6 proteins.

Mechanics of Centriole Microtubules

This is a review paper describing recent findings about the physical properties of centriolar microtubules. Microtubules are the principal structures making up the centrioles. The centrioles in turn are the principal agents in cell duplication and division (mitosis). The microtubules are seen to be long hollow cylinders: approximately 400 nm in length, with a 24 nm outside diameter, and a 5 nm wall thickness. Within the centrioles, the microtubules are arranged into nine parallel sets of triplets—thus numbering 27 parallel cylinders per centriole. Each normal eukaryotic (human and animal) cell, not in mitosis, has two perpendicular centrioles connected at their proximal (base) ends. During mitosis, these two become four, resulting in a total of 108 centriolar microtubules. The structure of the microtubules themselves is found to consist of 13 parallel filaments making up the cylinder walls. The filaments are composed of approximately 40 and β-tubulin connected end-to-end with their proximal (base) ends anchored in γ-tubulin. The longitudinal vibrations of the filaments are believed to create an electro-magnetic field within the cell which plays an important role in mitosis.

CEP295 interacts with microtubules and is required for centriole elongation.

ABSTRACTCentriole duplication is a tightly ordered process during which procentrioles are assembled in G1-S and elongate during S and G2. Here, we show that human CEP295 (Drosophila Ana1) is not essential for initial cartwheel assembly, but is required to build distal half centrioles during S and G2. Using super-resolution and immunogold electron microscopy, we demonstrate that CEP295 is recruited to the proximal end of procentrioles in early S phase, when it is also localized at the centriolar microtubule wall that surrounds the human SAS6 cartwheel hub. Interestingly, depletion of CEP295 not only inhibits the recruitments of POC5 and POC1B to the distal half centrioles in G2, resulting in shorter centrioles, it also blocks the post-translational modification of centriolar microtubules (e.g. acetylation and glutamylation). Importantly, our results indicate that CEP295 directly interacts with microtubules, and that excess CEP295 could induce the assembly of overly long centrioles. Furthermore, exogenous expression of the N-terminal domain of CEP295 exerts a dominant-negative effect on centriole elongation. Collectively, these findings suggest that CEP295 is essential for building the distal half centrioles and for post-translational modification of centriolar microtubules.

Human SAS-6 C-Terminus Nucleates and Promotes Microtubule Assembly in Vitro by Binding to Microtubules.

Centrioles are essential components of the animal centrosome and play crucial roles in the formation of cilia and flagella. They are cylindrical structures composed of nine triplet microtubules organized around a central cartwheel. Recent studies have identified spindle assembly abnormal protein SAS-6 as a critical component necessary for formation of the cartwheel. However, the molecular details of how the cartwheel participates in centriolar microtubule assembly have not been clearly understood. In this report, we show that the C-terminal tail (residues 470-657) of human SAS-6, HsSAS-6 C, the region that has been shown to extend toward the centriolar wall where the microtubule triplets are organized, nucleated and induced microtubule polymerization in vitro. The N-terminus (residues 1-166) of HsSAS-6, the domain known to be involved in formation of the central hub of the cartwheel, did not, however, exert any effect on microtubule polymerization. HsSAS-6 C bound to the microtubules and localized along the lengths of the microtubules in vitro. Microtubule pull-down and coimmunoprecipitation (Co-IP) experiments with S-phase synchronized HeLa cell lysates showed that the endogenous HsSAS-6 coprecipitated with the microtubules, and it mediated interaction with tubulin. Isothermal calorimetry titration and size exclusion chromatography showed that HsSAS-6 C bound to the αβ-tubulin dimer in vitro. The results demonstrate that HsSAS-6 possesses an intrinsic microtubule assembly promoting activity and further implicate that its outer exposed C-terminal tail may play critical roles in microtubule assembly and stabilizing microtubule attachment with the centriolar cartwheel.

CP110 exhibits novel regulatory activities during centriole assembly in Drosophila.

CP110 is a conserved centriole protein implicated in the regulation of cell division, centriole duplication, and centriole length and in the suppression of ciliogenesis. Surprisingly, we report that mutant flies lacking CP110 (CP110Δ) were viable and fertile and had no obvious defects in cell division, centriole duplication, or cilia formation. We show that CP110 has at least three functions in flies. First, it subtly influences centriole length by counteracting the centriole-elongating activity of several centriole duplication proteins. Specifically, we report that centrioles are ~10% longer than normal in CP110Δ mutants and ~20% shorter when CP110 is overexpressed. Second, CP110 ensures that the centriolar microtubules do not extend beyond the distal end of the centriole, as some centriolar microtubules can be more than 50 times longer than the centriole in the absence of CP110. Finally, and unexpectedly, CP110 suppresses centriole overduplication induced by the overexpression of centriole duplication proteins. These studies identify novel and surprising functions for CP110 in vivo in flies.

CEP120 and SPICE1 Cooperate with CPAP in Centriole Elongation

Centrosomes organize microtubule (MT) arrays and are comprised of centrioles surrounded by ordered pericentriolar proteins. Centrioles are barrel-shaped structures composed of MTs, and as basal bodies they template the formation of cilia/flagella. Defects in centriole assembly can lead to ciliopathies and genome instability. The assembly of procentrioles requires a set of conserved proteins. It is initiated at the G1-to-S transition by PLK4 and CEP152, which help recruit SASS6 and STIL to the vicinity of the mother centriole to organize the cartwheel. Subsequently, CPAP promotes centriolar MT assembly and elongation in G2. While centriole integrity is maintained by CEP135 and POC1 through MT stabilization, centriole elongation requires POC5 and is restricted by CP110 and CEP97. How strict control of centriole length is achieved remains unclear. Here, we show that CEP120 and SPICE1 are required to localize CEP135 (but not SASS6, STIL, or CPAP) to procentrioles. CEP120 associates with SPICE1 and CPAP, and depletion of any of these proteins results in short procentrioles. Furthermore, CEP120 or CPAP overexpression results in excessive centriole elongation, a process dependent on CEP120, SPICE1, and CPAP. Our findings identify a shared function for these proteins in centriole length control.

Human microcephaly protein CEP135 binds to hSAS-6 and CPAP, and is required for centriole assembly

Centrioles are cylindrical structures that are usually composed of nine triplets of microtubules (MTs) organized around a cartwheel-shaped structure. Recent studies have proposed a structural model of the SAS-6-based cartwheel, yet we do not know the molecular detail of how the cartwheel participates in centriolar MT assembly. In this study, we demonstrate that the human microcephaly protein, CEP135, directly interacts with hSAS-6 via its carboxyl-terminus and with MTs via its amino-terminus. Unexpectedly, CEP135 also interacts with another microcephaly protein CPAP via its amino terminal domain. Depletion of CEP135 not only perturbed the centriolar localization of CPAP, but also blocked CPAP-induced centriole elongation. Furthermore, CEP135 depletion led to abnormal centriole structures with altered numbers of MT triplets and shorter centrioles. Overexpression of a CEP135 mutant lacking the proper interaction with hSAS-6 had a dominant-negative effect on centriole assembly. We propose that CEP135 may serve as a linker protein that directly connects the central hub protein, hSAS-6, to the outer MTs, and suggest that this interaction stabilizes the proper cartwheel structure for further CPAP-mediated centriole elongation.

Structured illumination of the interface between centriole and peri-centriolar material

The increase in centrosome size in mitosis was described over a century ago, and yet it is poorly understood how centrioles, which lie at the core of centrosomes, organize the pericentriolar material (PCM) in this process. Now, structured illumination microscopy reveals in Drosophila that, before clouds of PCM appear, its proteins are closely associated with interphase centrioles in two tube-like layers: an inner layer occupied by centriolar microtubules, Sas-4, Spd-2 and Polo kinase; and an outer layer comprising Pericentrin-like protein (Dplp), Asterless (Asl) and Plk4 kinase. Centrosomin (Cnn) and γ-tubulin associate with this outer tube in G2 cells and, upon mitotic entry, Polo activity is required to recruit them together with Spd-2 into PCM clouds. Cnn is required for Spd-2 to expand into the PCM during this maturation process but can itself contribute to PCM independently of Spd-2. By contrast, the centrioles of spermatocytes elongate from a pre-existing proximal unit during the G2 preceding meiosis. Sas-4 is restricted to the microtubule-associated, inner cylinder and Dplp and Cnn to the outer cylinder of this proximal part. γ-Tubulin and Asl associate with the outer cylinder and Spd-2 with the inner cylinder throughout the entire G2 centriole. Although they occupy different spatial compartments on the G2 centriole, Cnn, Spd-2 and γ-tubulin become diminished at the centriole upon entry into meiosis to become part of PCM clouds.

Tankyrase 1 regulates centrosome function by controlling CPAP stability

CPAP--a gene mutated in primary microcephaly--is required for procentriole formation. Here we show that CPAP degradation and function is controlled by the poly(ADP-ribose) polymerase tankyrase 1. CPAP is PARsylated by tankyrase 1 in vitro and in vivo. Overexpression of tankyrase 1 leads to CPAP proteasomal degradation, preventing centriole duplication, whereas depletion of tankyrase 1 stabilizes CPAP in G1, generating elongated procentrioles and multipolarity. Tankyrase 1 localizes to centrosomes exclusively in G1, coinciding with CPAP degradation. Hence, tankyrase 1-mediated PARsylation regulates CPAP levels during the cell cycle to limit centriole elongation and ensure normal centrosome function.

Klp10A, a Microtubule-Depolymerizing Kinesin-13, Cooperates with CP110 to Control Drosophila Centriole Length

Klp10A is a kinesin-13 of Drosophila melanogaster that depolymerizes cytoplasmic microtubules. In interphase, it promotes microtubule catastrophe; in mitosis, it contributes to anaphase chromosome movement by enabling tubulin flux. Here we show that Klp10A also acts as a microtubule depolymerase on centriolar microtubules to regulate centriole length. Thus, in both cultured cell lines and the testes, absence of Klp10A leads to longer centrioles that show incomplete 9-fold symmetry at their ends. These structures and associated pericentriolar material undergo fragmentation. We also show that in contrast to mammalian cells where depletion of CP110 leads to centriole elongation, in Drosophila cells it results in centriole length diminution that is overcome by codepletion of Klp10A to give longer centrioles than usual. We discuss how loss of centriole capping by CP110 might have different consequences for centriole length in mammalian and insect cells and also relate these findings to the functional interactions between mammalian CP110 and another kinesin-13, Kif24, that in mammalian cells regulates cilium formation.

Scaffolding function of theChlamydomonasprocentriole protein CRC70, a member of the conserved Cep70 family

Centriole duplication occurs once per cell cycle through the assembly of daughter centrioles on the side wall of pre-existing centrioles. Little is known about the molecules involved in the assembly of new centrioles. Here, we identify CRC70 as a Chlamydomonas protein with an important role in the accumulation of centriole proteins at the site of assembly. CRC70 contains a highly conserved ~50-amino-acid sequence shared by mammalian Cep70 and preferentially localizes to immature centrioles (the procentrioles). This localization is maintained in the mutant bld10, in which centriole formation is blocked before the assembly of centriolar microtubules. RNA interference (RNAi)-mediated knockdown of CRC70 produces flagella-less cells and inhibits the recruitment of other centriole components, such as SAS-6 and Bld10p to the centriole. Overexpression of CRC70 induces an accumulation of these proteins in discrete spots in the cytoplasm. Overexpression of EGFP-tagged CRC70 in mouse NIH3T3 cells causes the formation of structures apparently related to centrioles. These findings suggest that CRC70 is a member of a conserved protein family and functions as a scaffold for the assembly of the centriole precursor.

Centriolar Kinesin Kif24 Interacts with CP110 to Remodel Microtubules and Regulate Ciliogenesis

We have identified a protein, Kif24, that shares homology with the kinesin-13 subfamily of motor proteins and specifically interacts with CP110 and Cep97, centrosomal proteins that play a role in regulating centriolar length and ciliogenesis. Kif24 preferentially localizes to mother centrioles. Loss of Kif24 from cycling cells resulted in aberrant cilia assembly but did not promote growth of abnormally long centrioles, unlike CP110 and Cep97 depletion. We found that loss of Kif24 leads to the disappearance of CP110 from mother centrioles, specifically in cycling cells able to form cilia. Kif24 is able to bind and depolymerize microtubules in vitro. Remarkably, ectopically expressed Kif24 specifically remodels centriolar microtubules without significantly altering cytoplasmic microtubules. Thus, our studies have identified a centriolar kinesin that specifically remodels a subset of microtubules, thereby regulating cilia assembly. These studies also suggest mechanistic differences between the regulation of microtubule elongation associated with centrioles and cilia.