Cellular Traction Research Articles

A possible molecular mechanism for mechanotransduction at cellular focal adhesion complexes

Mechanotransduction at focal adhesion complexes is key for various cellular events. Theoretical analyses were performed to predict a potential role of lipid membranes in modulating mechanotransduction at focal adhesions. Calculations suggested that the size of nanostructural constraints and mechanical pulling applied on lipid membranes affect the generation of cellular traction forces and signaling transduction at focal adhesions. This work provides predictions on how lipid membranes contribute to mechanotransduction at cellular focal adhesions.

Correlation of cellular traction forces and dissociation kinetics of adhesive protein zyxin revealed by multi-parametric live cell microscopy.

Cells exert traction forces on the extracellular matrix to which they are adhered through the formation of focal adhesions. Spatial-temporal regulation of traction forces is crucial in cell adhesion, migration, cellular division, and remodeling of the extracellular matrix. By cultivating cells on polyacrylamide hydrogels of different stiffness we were able to investigate the effects of substrate stiffness on the generation of cellular traction forces by Traction Force Microscopy (TFM), and characterize the molecular dynamics of the focal adhesion protein zyxin by Fluorescence Correlation Spectroscopy (FCS) and Fluorescence Recovery After Photobleaching (FRAP). As the rigidity of the substrate increases, we observed an increment of both, cellular traction generation and zyxin residence time at the focal adhesions, while its diffusion would not be altered. Moreover, we found a positive correlation between the traction forces exerted by cells and the residence time of zyxin at the substrate elasticities studied. We found that this correlation persists at the subcellular level, even if there is no variation in substrate stiffness, revealing that focal adhesions that exert greater traction present longer residence time for zyxin, i.e., zyxin protein has less probability to dissociate from the focal adhesion.

Morphology and cellular-traction of fibroblasts on 2D silk-fibroin hydrogel substrates

ABSTRACT Development of clinically amenable bio-implants with silk-fibroin (SF) necessitates characterization of cellular-traction generated between cells and the substrate. However, studies on the biomechanical response of cells on SF substrates are limited. In this study, we prepared SF hydrogels of varying compliance (SF30 and SF50) and varying surface-ligands (derivatized with poly-L-lysine (PLL) or Arg-Gly-Asp (RGD) peptide). Subsequently, NIH-3T3 fibroblast cells were grown on these substrates, and the morphological changes was examined. It was observed that the increase in SF stiffness from 0.7 kPa to 3.1 kPa decreased nucleus-to-cytoplasm area-ratio and increased asymmetricity along the major-axis of cells. Moreover, while functionalization of SF with RGD induced increase in cell-area and circularity, functionalization with PLL did not cause any change. Next, using traction-force-microscopy (TFM), we quantified 2D cell-traction for NIH-3T3 cells cultured on SF hydrogels. Cells plated on SF50 hydrogel exhibited significantly high traction stress as compared to SF30; change of functionalization did not show significant change. Also, protrusion traction stress was found to be greater than nuclear traction stress. Put together, our results suggest that surface-stiffness of SF-hydrogel, rather than nature of surface-ligand, regulates both cellular morphology and cellular traction stresses.

Advanced in silico validation framework for three-dimensional traction force microscopy and application to an in vitro model of sprouting angiogenesis

In the last decade, cellular forces in three-dimensional hydrogels that mimic the extracellular matrix have been calculated by means of Traction Force Microscopy (TFM). However, characterizing the accuracy limits of a traction recovery method is critical to avoid obscuring physiological information due to traction recovery errors. So far, 3D TFM algorithms have only been validated using simplified cell geometries, bypassing image processing steps or arbitrarily simulating focal adhesions. Moreover, it is still uncertain which of the two common traction recovery methods, i.e., forward and inverse, is more robust against the inherent challenges of 3D TFM. In this work, we established an advanced in silico validation framework that is applicable to any 3D TFM experimental setup and that can be used to correctly couple the experimental and computational aspects of 3D TFM. Advancements relate to the simultaneous incorporation of complex cell geometries, simulation of microscopy images of varying bead densities and different focal adhesion sizes and distributions. By measuring the traction recovery error with respect to ground truth solutions, we found that while highest traction recovery errors occur for cases with sparse and small focal adhesions, our implementation of the inverse method improves two-fold the accuracy with respect to the forward method (average error of 23% vs. 50%). This advantage was further supported by recovering cellular tractions around angiogenic sprouts in an in vitro model of angiogenesis. The inverse method recovered higher traction peaks and a clearer pulling pattern at the sprout protrusion tips than the forward method. Statement of significanceBiomaterial performance is often studied by quantifying cell-matrix mechanical interactions by means of Traction Force Microscopy (TFM). However, 3D TFM algorithms are often validated in simplified scenarios, which do not allow to fully assess errors that could obscure physiological information. Here, we established an advanced in silico validation framework that mimics real TFM experimental conditions and that characterizes the expected errors of a 3D TFM workflow. We apply this framework to demonstrate the enhanced accuracy of a novel inverse traction recovery method that is illustrated in the context of an in vitro model of sprouting angiogenesis. Together, our study shows the importance of a proper traction recovery method to minimise errors and the need for an advanced framework to assess those errors.

Hypergravity affects cell traction forces of fibroblasts

Cells sense and react on changes of the mechanical properties of their environment and, likewise, respond to external mechanical stress applied to them. However, whether the gravitational field as overall body force modulates cellular behavior is unclear. Different studies demonstrated that micro- and hypergravity influences the shape and elasticity of cells, initiate cytoskeleton reorganization, and influence cell motility. All these cellular properties are interconnected and contribute to forces that cells apply on their surrounding microenvironment. Yet, studies that investigated changes of cell traction forces under hypergravity conditions are scarce. Here, we performed hypergravity experiments on 3T3 fibroblast cells using the large-diameter centrifuge at the European Space Agency - European Space Research and Technology Centre. Cells were exposed to hypergravity of up to 19.5 g for 16 h in both the upright and the inverted orientation with respect to the g-force vector. We observed a decrease in cellular traction forces when the gravitational field was increased up to 5.4 g, followed by an increase of traction forces for higher gravity fields up to 19.5 g independent of the orientation of the gravity vector. We attribute the switch in cellular response to shear thinning at low g-forces, followed by significant rearrangement and enforcement of the cytoskeleton at high g-forces.

Study on the Expansion Dynamics of MDCK Epithelium by Interstitial Flow Using a Traction Force-Measurable Microfluidic Chip.

The movement of collective cells is affected through changes in physical interactions of cells in response to external mechanical stimuli, including fluid flow. Most tissues are affected by fluid flow at the interstitial level, but few studies have investigated the physical effects in collective cells affected by a low flow rate. In this study, collective cell migration of Madin–Darby canine kidney (MDCK) epithelial cells was investigated under static or interstitial flow (0, 0.1, and 1 μL/min) using a traction microfluidic device. The optimization of calculation of cellular traction forces was first achieved by changing interrogation window size from the fluorescent bead images. Migration analysis of cell collectives patterned with a 700 μm circular shape reveals that cells under the slow flow (0.1 and 1 μL/min) showed the inhibitory migration by decreasing cell island size and cellular speed compared to that of static condition. Analysis of cellular forces shows that level of traction forces was lower in the slow flow condition (~20 Pa) compared to that of static condition (~50 Pa). Interestingly, the standard deviation of traction force of cells was dramatically decreased as the flow rate increased from 0 to 1 μL/min, which indicates that flow affects the distribution of cellular traction forces among cell collectives. Cellular tension was increased by 50% in the cells under the fluid flow rate of 1 μL/min. Treatment of calcium blocker increased the migratory speed of cells under the flow condition, whereas there is little change of cellular forces. In conclusion, it has been shown that the interstitial flow inhibited the collective movement of epithelial cells by decreasing and re-distributing cellular forces. These findings provide insights into the study of the effect of interstitial flow on cellular behavior, such as development, regeneration, and morphogenesis.

Computational 4D-OCM for label-free imaging of collective cell invasion and force-mediated deformations in collagen

Traction force microscopy (TFM) is an important family of techniques used to measure and study the role of cellular traction forces (CTFs) associated with many biological processes. However, current standard TFM methods rely on imaging techniques that do not provide the experimental capabilities necessary to study CTFs within 3D collective and dynamic systems embedded within optically scattering media. Traction force optical coherence microscopy (TF-OCM) was developed to address these needs, but has only been demonstrated for the study of isolated cells embedded within optically clear media. Here, we present computational 4D-OCM methods that enable the study of dynamic invasion behavior of large tumor spheroids embedded in collagen. Our multi-day, time-lapse imaging data provided detailed visualizations of evolving spheroid morphology, collagen degradation, and collagen deformation, all using label-free scattering contrast. These capabilities, which provided insights into how stromal cells affect cancer progression, significantly expand access to critical data about biophysical interactions of cells with their environment, and lay the foundation for future efforts toward volumetric, time-lapse reconstructions of collective CTFs with TF-OCM.

Viscoelastic substrate decouples cellular traction force from other related phenotypes

Survival and maintenance of normal physiological functions depends on continuous interaction of cells with its microenvironment. Cells sense the mechanical properties of underlying substrate by applying force and modulate their behaviour in response to the resistance offered by the substrate. Most of the studies addressing cell-substrate mechanical interactions have been carried out using elastic substrates. Since tissues within our body are viscoelastic in nature, here we explore the effect of substrate’s viscoelasticity on various properties of mesenchymal stem cells. Here, we used two sets of polyacrylamide substrates having similar storage modulus (G’ = 1.1–1.6 kPa) but different loss modulus (G” = 45 Pa and 300 Pa). We report that human mesenchymal stem cells spread more but apply less force on the viscoelastic substrate (substrate with higher loss modulus). We further investigated the effect of substrate viscoelasticity on the expression of other contractility-associated proteins such as focal adhesion (FA) proteins (Vinculin, Paxillin, Talin), cytoskeletal proteins (actin, mysion, intermediate filaments, and microtubules) and mechano-sensor protein Yes-Associated Protein (YAP). Our results show that substrate viscoelasticity decouples cellular traction from other known traction related phenotypes.

Hyperthermia induced disruption of mechanical balance leads to G1 arrest and senescence in cells.

Human body temperature limits below 40°C during heat stroke or fever. The implications of prolonged exposure to the physiologically relevant temperature (40°C) on cellular mechanobiology is poorly understood. Here, we have examined the effects of heat stress (40°C for 72 h incubation) in human lung adenocarcinoma (A549), mouse melanoma (B16F10), and non-cancerous mouse origin adipose tissue cells (L929). Hyperthermia increased the level of ROS, γ-H2AX and HSP70 and decreased mitochondrial membrane potential in the cells. Heat stress impaired cell division, caused G1 arrest, induced cellular senescence, and apoptosis in all the tested cell lines. The cells incubated at 40°C for 72 h displayed a significant decrease in the f-actin level and cellular traction as compared with cells incubated at 37°C. Also, the cells showed a larger focal adhesion area and stronger adhesion at 40°C than at 37°C. The mitotic cells at 40°C were unable to round up properly and displayed retracting actin stress fibers. Hyperthermia down-regulated HDAC6, increased the acetylation level of microtubules, and perturbed the chromosome alignment in the mitotic cells at 40°C. Overexpression of HDAC6 rescued the cells from the G1 arrest and reduced the delay in cell rounding at 40°C suggesting a crucial role of HDAC6 in hyperthermia mediated responses. This study elucidates the significant role of cellular traction, focal adhesions, and cytoskeletal networks in mitotic cell rounding and chromosomal misalignment. It also highlights the significance of HDAC6 in heat-evoked senile cellular responses.

Stiffness Sensing by Aortic Smooth Muscle Cells: Continuum Mechanics Modeling of the Acto-Myosin Role

Smooth Muscle Cells (SMCs) play a vital role in maintaining homeostasis in the aorta by sensing and responding to mechanical stimuli. However, the mechanisms that underlie the ability of SMCs to sense and respond to stiffness change in their environment are still partially unclear. In this study, we focus on the role of acto-myosin contractility in stiffness sensing and introduce a novel continuum mechanics approach based on the principles of thermal strains. Each stress fiber satisfies a universal stress-strain relationship driven by a Young’s modulus, a contraction coefficient scaling the fictitious thermal strain, a maximum contraction stress and a softening parameter describing slipping effects at the weakest links. To account for the inherent variability of cellular responses, large populations of SMCs are modeled with the finite-element method, each cell having a random number and a random arrangement of stress fibers. Moreover, the level of myosin activation in each stress fiber satisfies a Weibull probability density function. Model predictions are compared to traction force measurements on different SMC lineages. It is demonstrated that the model not only predicts well the effects of substrate stiffness on cellular traction, but it can also successfully approximate the statistical variations of cellular tractions induced by intercellular variability. Finally, stresses in the nuclear envelope and in the nucleus are computed with the model, showing that the variations of cytoskeletal forces induced by substrate stiffness directly induce deformations of the nuclear envelope and of the nucleus, which can potentially alter gene expression. The predictability of the model combined to its relative simplicity are promising assets for further investigation of stiffness sensing in multicellular 3D environments. Eventually, this could contribute to decipher the effects of mechanosensitivity impairment, which are known to be at the root of aortic aneurysms.

Epifluorescence-based three-dimensional traction force microscopy

We introduce a novel method to compute three-dimensional (3D) displacements and both in-plane and out-of-plane tractions on nominally planar transparent materials using standard epifluorescence microscopy. Despite the importance of out-of-plane components to fully understanding cell behavior, epifluorescence images are generally not used for 3D traction force microscopy (TFM) experiments due to limitations in spatial resolution and measuring out-of-plane motion. To extend an epifluorescence-based technique to 3D, we employ a topology-based single particle tracking algorithm to reconstruct high spatial-frequency 3D motion fields from densely seeded single-particle layer images. Using an open-source finite element (FE) based solver, we then compute the 3D full-field stress and strain and surface traction fields. We demonstrate this technique by measuring tractions generated by both single human neutrophils and multicellular monolayers of Madin–Darby canine kidney cells, highlighting its acuity in reconstructing both individual and collective cellular tractions. In summary, this represents a new, easily accessible method for calculating fully three-dimensional displacement and 3D surface tractions at high spatial frequency from epifluorescence images. We released and support the complete technique as a free and open-source code package.

Stick–slip model for actin-driven cell protrusions, cell polarization, and crawling

Cell crawling requires the generation of intracellular forces by the cytoskeleton and their transmission to an extracellular substrate through specific adhesion molecules. Crawling cells show many features of excitable systems, such as spontaneous symmetry breaking and crawling in the absence of external cues, and periodic and propagating waves of activity. Mechanical instabilities in the active cytoskeleton network and feedback loops in the biochemical network of activators and repressors of cytoskeleton dynamics have been invoked to explain these dynamical features. Here, I show that the interplay between the dynamics of cell-substrate adhesion and linear cellular mechanics is sufficient to reproduce many nonlinear dynamical patterns observed in spreading and crawling cells. Using an analytical formalism of the molecular clutch model of cell adhesion, regulated by local mechanical forces, I show that cellular traction forces exhibit stick-slip dynamics resulting in periodic waves of protrusion/retraction and propagating waves along the cell edge. This can explain spontaneous symmetry breaking and polarization of spreading cells, leading to steady crawling or bipedal motion, and bistability, where persistent cell motion requires a sufficiently strong transient external stimulus. The model also highlights the role of membrane tension in providing the long-range mechanical communication across the cell required for symmetry breaking.

Live-cell super-resolved PAINT imaging of piconewton cellular traction forces.

Despite the vital role of mechanical forces in biology, it still remains a challenge to image cellular force with sub-100-nm resolution. Here, we present tension points accumulation for imaging in nanoscale topography (tPAINT), integrating molecular tension probes with the DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) technique to map piconewton mechanical events with ~25-nm resolution. To perform live-cell dynamic tension imaging, we engineered reversible probes with a cryptic docking site revealed only when the probe experiences forces exceeding a defined mechanical threshold (~7-21 pN). Additionally, we report a second type of irreversible tPAINT probe that exposes its cryptic docking site permanently and thus integrates force history over time, offering improved spatial resolution in exchange for temporal dynamics. We applied both types of tPAINT probes to map integrin receptor forces in live human platelets and mouse embryonic fibroblasts. Importantly, tPAINT revealed a link between platelet forces at the leading edge of cells and the dynamic actin-rich ring nucleated by the Arp2/3 complex.

Slippery and magnetically responsive micropillared surfaces for manipulation of droplets and beads

Stimuli-responsive surfaces are of practical importance for applications ranging from enhanced mixing of reagents in lab-on-a-chip systems until probing cellular traction forces. Non-destructive reversible bending of cilia-inspired magnetic pillars can be used for controlled transportation of non-magnetic objects and bio-inspired sensing. Magnetic actuation of micropillars suspended in liquids allows controlled mixing, propelling, and stirring of fluids as well as droplet manipulation, which are important for various applications including generation of cell spheroids and droplet coalescence in microfluidic systems. In order to expand their practical applications, fabrication processes capable of rapid prototyping have to be developed. Inspired by biological cilia and their functionalities, actuating hairy surfaces are herein fabricated and implemented to manipulate both microbeads and droplets. The artificial cilia are based on microscale magnetic pillar arrays made of flexible polydimethylsiloxane functionalized with magnetic microparticles. The arrays are fabricated by a new method using patterned molds that relies on cryogenic separation to produce transparent cilia-inspired arrays without requiring manual interference to clean the templates during the process. Magnetic actuation of the pillar arrays is demonstrated in isopropanol and silicone oil. Filling with oil yields magnetically responsive slippery lubricated surfaces allowing directional motion of droplets by repetitive bending and recovery of the flexible magnetic pillars. The achieved structures allow manipulation of microbeads and droplets which is uncommon even at the sub-mm scale; directional motion is demonstrated for 250 μm–550 μm sized droplets. Droplet transportation is facilitated by extremely low hysteresis and a high degree of omnidirectional bending of the pillar array.

Characterization of multicellular breast tumor spheroids using image data-driven biophysical mathematical modeling

Multicellular tumor spheroid (MCTS) systems provide an in vitro cell culture model system which mimics many of the complexities of an in vivo solid tumor and tumor microenvironment, and are often used to study cancer cell growth and drug efficacy. Here, we present a coupled experimental-computational framework to estimate phenotypic growth and biophysical tumor microenvironment properties. This novel framework utilizes standard microscopy imaging of MCTS systems to drive a biophysical mathematical model of MCTS growth and mechanical interactions. By extending our previous in vivo mechanically-coupled reaction–diffusion modeling framework we developed a microscopy image processing framework capable of mechanistic characterization of MCTS systems. Using MDA-MB-231 breast cancer MCTS, we estimated biophysical parameters of cellular diffusion, rate of cellular proliferation, and cellular tractions forces. We found significant differences in these model-based biophysical parameters throughout the treatment time course between untreated and treated MCTS systems, whereas traditional size-based morphometric parameters were inconclusive. The proposed experimental-computational framework estimates mechanistic MCTS growth and invasion parameters with significant potential to assist in better and more precise assessment of in vitro drug efficacy through the development of computational analysis methodologies for three-dimensional cell culture systems to improve the development and evaluation of antineoplastic drugs.

Recovery of Tractions Exerted by Single Cells in Three-Dimensional Nonlinear Matrices.

Cell-generated tractions play an important role in various physiological and pathological processes such as stem-cell differentiation, cell migration, wound healing, and cancer metastasis. Traction force microscopy (TFM) is a technique for quantifying cellular tractions during cell-matrix interactions. Most applications of this technique have heretofore assumed that the matrix surrounding the cells is linear elastic and undergoes infinitesimal strains, but recent experiments have shown that the traction-induced strains can be large (e.g., more than 50%). In this paper, we propose a novel three-dimensional (3D) TFM approach that consistently accounts for both the geometric nonlinearity introduced by large strains in the matrix, and the material nonlinearity due to strain-stiffening of the matrix. In particular, we pose the TFM problem as a nonlinear inverse hyperelasticity problem in the stressed configuration of the matrix, with the objective of determining the cellular tractions that are consistent with the measured displacement field in the matrix. We formulate the inverse problem as a constrained minimization problem and develop an efficient adjoint-based minimization procedure to solve it. We first validate our approach using simulated data, and quantify its sensitivity to noise. We then employ the new approach to recover tractions exerted by NIH 3T3 cells fully encapsulated in hydrogel matrices of varying stiffness. We find that neglecting nonlinear effects can induce significant errors in traction reconstructions. We also find that cellular tractions roughly increase with gel stiffness, while the strain energy appears to saturate.

Actomyosin-dependent invasion of endothelial sprouts in collagen.

During sprouting angiogenesis-the growth of blood vessels from the existing vasculature-endothelial cells (ECs) adopt an elongated invasive form and exert forces at cell-cell and cell-matrix interaction sites. These cell shape changes and cellular tractions require extensive reorganizations of the actomyosin network. However, the respective roles of actin and myosin for endothelial sprouting are not fully elucidated. In this study, we further investigate these roles by treating 2D-migrating and 3D-sprouting ECs with chemical compounds targeting either myosin or actin. These treatments affected the endothelial cytoskeleton drastically and reduced the invasive response in a compound-specific manner; pointing toward a tight control of the actin and myosin activity during sprouting. Clusters in the data further illustrate that endothelial sprout morphology is sensitive to the in vitro model mechanical microenvironment and directs future research toward mechanical substrate guidance as a strategy for promoting engineered tissue vascularization. In summary, our results add to a growing corpus of research highlighting a key role of the cytoskeleton for sprouting angiogenesis.

Modeling of Mechanosensing Mechanisms Reveals Distinct Cell Migration Modes to Emerge From Combinations of Substrate Stiffness and Adhesion Receptor-Ligand Affinity.

Mesenchymal cell migration is an integral process in development and healing. The process is regulated by both mechanical and biochemical properties. Mechanical properties of the environment are sensed through mechanosensing, which consists of molecular responses mediated by mechanical signals. We developed a computational model of a deformable 3D cell on a flat substrate using discrete element modeling. The cell is polarized in a single direction and thus moves along the long axis of the substrate. By modeling discrete focal adhesions and stress fibers, we implement two mechanosensing mechanisms: focal adhesion stabilization by force and stress fiber strengthening upon contraction stalling. Two substrate-associated properties, substrate (ligand) stiffness and adhesion receptor–ligand affinity (in the form of focal adhesion disassembly rate), were varied for different model setups in which the mechanosensing mechanisms are set as active or inactive. Cell displacement, focal adhesion number, and cellular traction were quantified and tracked in time. We found that varying substrate stiffness (a mechanical property) and adhesion receptor–ligand affinity (a biochemical property) simultaneously dictate the mode in which cells migrate; cells either move in a smooth manner reminiscent of keratocytes or in a cyclical manner reminiscent of epithelial cells. Mechanosensing mechanisms are responsible for the range of conditions in which a cell adopts a particular migration mode. Stress fiber strengthening, specifically, is responsible for cyclical migration due to build-up of enough force to elicit rupture of focal adhesions and retraction of the cellular rear. Together, both mechanisms explain bimodal dependence of cell migration on substrate stiffness observed in the literature.

As the endothelial cell reorients, its tensile forces stabilize

When adherent cells are subjected to uniaxial sinusoidal stretch at frequencies close to physiological, their body and their contractile stress fibers realign nearly perpendicularly to the stretch axis. A common explanation for this phenomenon is that stress fibers reorient along the direction where they are unaffected by the applied cyclic stretch and thus can maintain optimal (homeostatic) tensile force. The ability of cells to achieve tensional homeostasis in response to external disturbances is important for normal physiological functions of cells and tissues and it provides protection against diseases, including cancer and atherosclerosis. However, quantitative experimental data that support the idea that stretch-induced reorientation is associated with tensional homeostasis are lacking. We observed previously that in response to uniaxial cyclic stretch of 10% strain amplitudes, traction forces of single endothelial cells reorient in the direction perpendicular to the stretch axis. Here we carried out a secondary analysis of those data to investigate whether this reorientation of traction forces is associated with tensional homeostasis. Our analysis showed that stretch-induced reorientation of traction forces was accompanied by attenuation of temporal variability of the traction field to the level that was observed in the absence of stretch. These findings represent a quantitative experimental evidence that stretch-induced reorientation of cellular traction forces is associated with the cell’s tendency to achieve tensional homeostasis.

Piezo1 activation gains traction

A major unanswered question in biology is how mechanical forces are generated, detected and transduced by cells to impact biochemical and genetic programs. Our work is aimed at uncovering the mechanical principles at play in cells and tissues using novel molecular, imaging and bioengineering tools. Here we present insights gleaned from non‐invasive approaches to measure and manipulate mechanical signals in native cellular conditions. We find that the mechanically‐activated ion channel Piezo1 transduces cell‐generated traction forces to regulate lineage choice of neural stem cells. We show that actomyosin‐based cellular traction forces generate spatially‐restricted Piezo1 Ca2+ flickers in the absence of externally‐applied mechanical forces. Although Piezo1 channels diffuse readily in the plasma membrane and are widely distributed across the cell, their Ca2+ flicker activity is enriched in regions proximal to force‐producing adhesions. The mechanical force that activates Piezo1 arises from Myosin II phosphorylation by Myosin Light Chain Kinase. We propose that Piezo1 Ca2+ flickers allow spatial segregation of mechanotransduction events, and that mobility allows channel molecules to efficiently respond to local mechanical stimuli.Support or Funding InformationNIH grants R01 NS109810 and DP2 AT010376