Flow Cell Research Articles

Reversible Hydrogen Acceptor-Donor Enables Relay Mechanism for Nitrate-to-Ammonia Electrocatalysis.

Electrocatalytic nitrate reduction is a crucial process for sustainable ammonia production. However, to maximize ammonia yield efficiency, this technology inevitably operates at the potentials more negative than 0 V vs. RHE, leading to high energy consumption and competitive hydrogen evolution.To eradicate this issue, hydrogen tungsten bronze (HxWO3) as reversible hydrogen donor-acceptor is partnered with copper (Cu) to enable a relay mechanism at potentials positive than 0 V vs. RHE, which involves rapid intercalation of H into HxWO3 lattice, prompt de-intercalation of the lattice H and transfer onto Cu, and spontaneous H-mediated nitrate-to-ammonia conversion on Cu.The resulting catalysts demonstrated a high ammonia yield rate of 3332.9±34.1 mmol gcat-1 h-1 and a Faraday efficiency of ~100 % at 0.10 V vs. RHE, displaying a record-low estimated energy consumption of 17.6 kWh kgammonia-1. Using these catalysts, we achieve continuous ammonia production in an enlarged flow cell at a real energy consumption of 17.0 kWh kgammonia-1.

Reversible Hydrogen Acceptor–Donor Enables Relay Mechanism for Nitrate‐to‐Ammonia Electrocatalysis

Electrocatalytic nitrate reduction is a crucial process for sustainable ammonia production. However, to maximize ammonia yield efficiency, this technology inevitably operates at the potentials more negative than 0 V vs. RHE, leading to high energy consumption and competitive hydrogen evolution. To eradicate this issue, hydrogen tungsten bronze (HxWO3) as reversible hydrogen donor‐acceptor is partnered with copper (Cu) to enable a relay mechanism at potentials positive than 0 V vs. RHE, which involves rapid intercalation of H into HxWO3 lattice, prompt de‐intercalation of the lattice H and transfer onto Cu, and spontaneous H‐mediated nitrate‐to‐ammonia conversion on Cu. The resulting catalysts demonstrated a high ammonia yield rate of 3332.9±34.1 mmol gcat−1 h−1 and a Faraday efficiency of ~100 % at 0.10 V vs. RHE, displaying a record‐low estimated energy consumption of 17.6 kWh kgammonia−1. Using these catalysts, we achieve continuous ammonia production in an enlarged flow cell at a real energy consumption of 17.0 kWh kgammonia−1.

Bi‐Doped In2O3 Nanofiber for Efficient Electrocatalytic CO2 Reduction

AbstractElectrocatalytic carbon dioxide reduction reaction (CO2RR) to formic acid (HCOOH) is attracted for superfluous CO2 removal and HCOOH production under ambient conditions. Indium‐based catalysts has considered as a good candidate material for CO2RR to HCOOH due to their environmentally friendly features. However, the catalytic efficiency is limited by the poor HCOOH Faradaic efficiency (FE) and high reaction overpotential of electrocatalyst, and the activity and stability of indium‐based catalysts are unsatisfactory, especially in industrial current density that is critical for commercialization. Herein, a fiber Bi‐doped In2O3 was synthesized through electrospinning method, and it demonstrate a FEHCOOH of 88.2% at −1.5 V versus RHE (reversible hydrogen electrode) with partial current density of −21.8 mA cm−2 in H type cell. Specially, the Bi‐In electrocatalyst also reach the industrial current density standard, which can work at −400 mA cm−2 current density with FEHCOOH of 92.7% (yield of HCOOH is 6.9 mmol h−1) in home‐made Flow cell. Importantly, Bi‐In shows 24 h long‐term stability test in −300 mA cm−2. The improvement catalytic activity of Bi‐In catalyst is ascribed to the optimized electronic structure of In site, and the reduced work function value of Bi‐In is beneficial for reducing the formation energy of the key *OCHO intermediates.

Development of a 3D Printed Flow Cell for Application as an In-line Optical Particle Analysis Tool

Development of a 3D Printed Flow Cell for Application as an In-line Optical Particle Analysis Tool

Relay Catalysis of Isolated Rhodium-Alloyed Copper Boosts Urea Electrosynthesis from Nitrate and CO2.

Urea electrosynthesis from the coelectrolysis of NO3- and CO2 (UENC) presents a fascinating approach for simultaneously migrating NO3- pollutants and producing valuable urea. In this study, isolated Rh-alloyed copper (Rh1Cu) is explored as a highly active and selective catalyst toward the UENC. Combined in situ spectroscopic analysis and theoretical calculations reveal the relay catalysis of the Rh1 site and Cu site to promote the UENC energetics, in which the Rh1 site activates NO3- to form *NH2 while the Cu site activates CO2 to form *CO. The formed *CO is then migrated from the Cu substrate to the nearby Rh1 site, which promotes the C-N coupling of *NH2 and *CO toward the urea formation. Prominently, Rh1Cu achieves an exceptional UENC performance in the flow cell, exhibiting the highest urea-Faradaic efficiency of 67.10% and urea yield rate of 50.36 mmol h-1 g-1 at -0.6 V versus RHE.

Determination of trace uranium concentrations in spent‐fuel reprocessing using online graphite crystal pre‐diffraction energy‐dispersive x‐ray fluorescence

AbstractAn online graphite crystal pre‐diffraction x‐ray fluorescence technique was developed for accurate real‐time detection of trace uranium concentrations in spent‐fuel reprocessing streams. Online analysis for determining uranium concentrations was established. The device was equipped with measurement windows in both the flow cell and a side wall of the glove box. X‐ray tubes and detectors were arranged outside the glove box, and the process stream flowing through the flow cell was measured through the measurement window. A cylindrical highly oriented pyrolytic graphite crystal was located in front of the detector to improve detection efficiency and to provide monochromatic uranium‐characteristic x‐rays. At the same time, the device could perform remote online automatic calibration. The uranium detection limit in a kerosene solution was 0.08 mg/L, and the quantitative limit was 0.27 mg/L. The detection limit in a nitric acid solution was 0.11 mg/L, and the quantitative limit was 0.37 mg/L. The relative standard deviation of measuring 0.5 mg/L uranium was less than 10%, which greatly improved online monitoring of trace uranium in spent‐fuel reprocessing samples.

Case Report: Emergence of de novo Donor-Specific HLA antibodies post Pneumococcal & Varicella Zoster Vaccinations in Waitlisted Renal Transplant Candidate

Abstract Introduction/Objective In renal transplant waitlisted patients, vaccination series remains to be the standard of care for infection prevention. There is a need to investigate if any of these vaccines or their adjuvant components can induce de novo donor-specific antibodies (dnDSA) against human leukocyte antigens (HLA). These novel anti-HLA antibodies in renal transplant waitlisted patients can result in a positive flow cell crossmatch (FCXM) associated with an increased risk of renal transplant rejection. Methods/Case Report We present a 59-year-old renal transplant waitlisted patient who has had multiple negative T- cell and B-cell FCXM with no detection of dnDSA at baseline. We detected de-novo anti-HLA antibodies after he received pneumococcal conjugate (Pneum-C-13) and recombinant zoster vaccine (RZV). After vaccination, FCXM was positive for both T-cells and B-cells. HLA class I antibodies (A1, 23, 24, 80; B44, 45, 76) showed a panel reactive antibody (PRA) of 51%. Epitope analysis highlighted 166DG and 166ES as shared epitopes responsible for the entire specificity. The A1 dn-DSA had a mean fluorescence intensity (MFI) of 1800 and with shared A80 epitope MFI was 15,000 contributing to the strong positivity observed in T-cell and B-cell FCXM. New onset A1, and B44 DSA predicted high risk for transplant rejection with his sibling. His planned live donor renal transplant was halted and had to instead enter the kidney-paired donor program wherein he received his transplantation after 16 months. Results (if a Case Study enter NA) NA Conclusion Allosensitization risk secondary to RZV or Pneum-C-13 vaccines or their adjuvant components in renal transplant waitlisted patients must be considered as a potential risk for transplant rejection. Future studies can utilize monitoring of HLA-specific memory B-cells to provide crucial insights into the primary mechanism of action of dn-DSA anti-HLA antibody formation and suggest interventions to mitigate this memory B-cell activation.

Carbonate-carbonate coupling on platinum surface promotes electrochemical water oxidation to hydrogen peroxide

Water electro-oxidation to form H2O2 is an important way to produce H2O2 which is widely applied in industry. However, its mechanism is under debate and HO(ads), hydroxyl group adsorbed onto the surface of the electrode, is regarded as an important intermediate. Herein, we study the mechanism of water oxidation to H2O2 at Pt electrode using in-situ Raman spectroscopy and differential electrochemical mass spectroscopy and find peroxide bond mainly originated from the coupling of two CO32- via a C2O62- intermediate. By quantifying the 18O isotope in the product, we find that 93% of H2O2 was formed via the CO32- coupling route and 7% of H2O2 is from OH(ads)-CO3•− route. The OH(ads)-OH(ads) coupling route has a negligible contribution. The comparison of various electrodes shows that the strong adsorption of CO3(ads) at the electrode surface is essential. Combining with a commercial cathode catalyst to produce H2O2 during oxygen reduction, we assemble a flow cell in which the cathode and anode simultaneously produce H2O2. It shows a Faradaic efficiency of 150% of H2O2 at 1 A cm−2 with a cell voltage of 2.3 V.

Barcode 100K Specimens: In a Single Nanopore Run.

It is a global priority to better manage the biosphere, but action must be informed by comprehensive data on the abundance and distribution of species. The acquisition of such information is currently constrained by high costs. DNA barcoding can speed the registration of unknown animal species, the most diverse kingdom of eukaryotes, as the BIN system automates their recognition. However, inexpensive sequencing protocols are critical as the census of all animal species is likely to require the analysis of a billion or more specimens. Barcoding involves DNA extraction followed by PCR and sequencing with the last step dominating costs until 2017. By enabling the sequencing of highly multiplexed samples, the Sequel platforms from Pacific BioSciences slashed costs by 90%, but these instruments are only deployed in core facilities because of their expense. Sequencers from Oxford Nanopore Technologies provide an escape from high capital and service costs, but their low sequence fidelity has, until recently, constrained adoption. However, the improved performance of its latest flow cells (R10.4.1) erases this barrier. This study demonstrates that a MinION flow cell can characterise an amplicon pool derived from 100,000 specimens while a Flongle flow cell can process one derived from several thousand. At $0.01 per specimen, DNA sequencing is now the least expensive step in the barcode workflow.

P-Block Aluminum Single-Atom Catalyst for Electrocatalytic CO2 Reduction with High Intrinsic Activity.

Atomically dispersed transition metal sites on nitrogen-doped carbon catalysts hold great potential for the electrochemical CO2 reduction reaction (CO2RR) to CO due to their encouraging selectivity. However, their intrinsic activity is restricted by the hurdle of the high energy barrier of either *COOH formation or *CO desorption due to the scaling relationship. Herein, we discover a p-block aluminum single-atom catalyst (Al-NC) featuring an Al-N4 site that enables disentangling this hurdle, which endows a moderate reaction kinetic barrier for *COOH formation and *CO desorption, as validated by in situ attenuated total reflection infrared spectroscopy and theoretical simulations. As a result, the developed Al-NC shows a CO Faradaic efficiency (FECO) of up to 98.76% at -0.65 V vs RHE and an intrinsic catalytic turnover frequency of 3.60 s-1 at -0.99 V vs RHE, exceeding those of the state-of-the-art Ni-NC and Fe-NC counterparts. Moreover, it also delivers a partial CO current of 309 mA·cm-2 at 93.65% FECO and 605 mA at >85% FECO in a flow cell and membrane electrode assembly (MEA), respectively. Strikingly, when using low-concentration CO2 (30%) as the feedstock, this catalyst can still deliver a partial CO current of 240 mA at >80% FECO in the MEA. Considering the earth-abundant character of the Al element and the high intrinsic activity of the Al-NC catalyst, it is a promising alternative to today's transition metal-based single-atom catalysts.

Tumor Resection in Hepatic Carcinomas Restores Circulating T Regulatory Cells.

Background/Objectives: Cholangiocarcinoma (CCA) and hepatocellular carcinoma (HCC) represent major primary liver cancers, affecting one of the most vital organs in the human body. T regulatory (Treg) cells play an important role in liver cancers through the immunosuppression of antitumor immune responses. The current study focuses on the characterization of circulating natural killer (NK) cells and T cell subsets, including Treg cells, in CCA and HCC patients, before and after surgical tumor resection, in order to understand the effect of tumor resection on the homeostasis of peripheral blood NK cells and T cells. Methods: Whole blood assays were performed to monitor immune alterations and the functional competence of circulating lymphocytes in a group of ten healthy individuals, eight CCA patients, and twenty HCC patients, before and one month after the surgical procedure, using flow cytometry, cell sorting, and qRT-PCR. Results: Before tumor resection, both HCC and CCA patients display increased percentages of CD8+ Treg cells and decreased frequencies of circulating CD4+ Treg cells. Notwithstanding, no functional impairment was detected on circulating CD4+ Treg cells, neither in CCA nor in HCC patients. Interestingly, the frequency of peripheral CD4+ Treg cells increased from 0.55% ± 0.49 and 0.71% ± 0.54 (in CCA and HCC, respectively) at T0 to 0.99% ± 0.91 and 1.17% ± 0.33 (in CCA and HCC, respectively) at T1, following tumor resection. Conclusions: Our results suggest mechanisms of immune modulation induced by tumor resection.

Electrocatalytic nitrite conversion to ammonia over Mn single atoms anchored on MoO3-x

Electrocatalytic reduction of NO2 to NH3 (NO2RR) offers a promising route to attain harmful NO2– removal and valuable NH3 production. Herein, Mn single atoms anchored on oxygen vacancy-rich MoO3-x (Mn1/MoO3-x) are developed as a high-performance catalyst for the NO2RR. Atom characterizations unravel that the isolated Mn atoms exist as Mn1-O5 moieties on MoO3-x. Theoretical calculations and in situ electrochemical spectroscopic measurements unveil that Mn1/MoO3-x follows a Langmuir-Hinshelwood mechanism to drive the NO2RR process, in which Mn1-O5 site facilitates the adsorption and activation of NO2– to form the intermediates, while MoO3-x substrate dissociates H2O to yield *H. The generated *H is then transferred from MoO3-x substrate to Mn1-O5 site which promotes the intermediate protonation to produce NH3. Remarkably, Mn1/MoO3-x in flow cell reaches the high NH3 yield rate of 546.25 μmol h−1 cm−2 and NH3-Faraday efficiency of 92.6 %, outperforming most reported NO2RR catalysts.

Efficient nitrite-to-ammonia electroreduction on single Ag sites

Electroreduction of nitrite to ammonia (NO2RR) provides an innovative route for simultaneously achieving waste NO2– removal and valuable NH3 production. Herein, single-atom Ag on hexagonal BN nanosheets (Ag1@h-BN) is developed as an efficient catalyst for the NO2RR. Strikingly, Ag1@h-BN assembled in a flow cell shows the highest NH3-Faradaic efficiency of 92.04 % with the corresponding NH3 yield rate of 1523.6 μmol h−1 cm−2 at a high current density of 266.2 mA cm−2. Theoretical calculations and electrochemical spectroscopic measurements unveil the creation of Ag1-N3 site to selectively activate NO2– and boost the hydrogenation energetics of NO2–-to-NH3 pathway, consequently resulting in the substantially expedited selectivity and activity of Ag1@h-BN for the NO2RR.

Establishing a Robust Nonlinear Targeted Switch for C1 Electroproduction in Atomic Alloy Cox/Pd Bimetallenes

Establishing a targeted switch for CO2 conversion under electric drive is essential for achieving carbon‐balance by enabling selective chemicals. However, engineering the topological assembly of active sites to precisely regulate the competing pathways for various intermediates has been plagued by unclear structure‐function relationships. To tailor the CO/formate pathways, herein we established a robust nonlinear targeted switch with tunable active Cox sites integrated into Pd metallene, which involves Co1/Pd single‐atom alloy (favoring CO) and Co2/Pd diatomic alloy (favoring formate). Transitioning from Co1/Pd to Co2/Pd atomic alloy bimetallenes resulted in a nonlinear, high‐contrast flip in selectivity, surpassing 94% for CO and formate productions in both H‐cell and flow cell. Furthermore, the superior selectivity and current efficiency for CO (> 80 %) and formate (> 88%) were consistently maintained at ‐150 mA cm‐2 over continuous 200 h. Theoretical simulations and in‐situ spectroscopy analyses unveiled that appropriate adjacent metal site combinations (Pd‐Pd, Pd‐Co and Co‐Co) lead to tunable dz2 band center and a nonlinear shift in preferred adsorption configurations of intermediates, dictating the C1 pathways. Our finding reveals a desired switch in C1 selectivity and robust stability within Cox/Pd system, providing a new perspective for fine‐tuning energy conversion processes through specific topological assembly.

Establishing a Robust Nonlinear Targeted Switch for C1 Electroproduction in Atomic Alloy Cox/Pd Bimetallenes.

Establishing a targeted switch for CO2 conversion under electric drive is essential for achieving carbon-balance by enabling selective chemicals. However, engineering the topological assembly of active sites to precisely regulate the competing pathways for various intermediates has been plagued by unclear structure-function relationships. To tailor the CO/formate pathways, herein we established a robust nonlinear targeted switch with tunable active Cox sites integrated into Pd metallene, which involves Co1/Pd single-atom alloy (favoring CO) and Co2/Pd diatomic alloy (favoring formate). Transitioning from Co1/Pd to Co2/Pd atomic alloy bimetallenes resulted in a nonlinear, high-contrast flip in selectivity, surpassing 94% for CO and formate productions in both H-cell and flow cell. Furthermore, the superior selectivity and current efficiency for CO (> 80 %) and formate (> 88%) were consistently maintained at -150 mA cm-2 over continuous 200 h. Theoretical simulations and in-situ spectroscopy analyses unveiled that appropriate adjacent metal site combinations (Pd-Pd, Pd-Co and Co-Co) lead to tunable dz2 band center and a nonlinear shift in preferred adsorption configurations of intermediates, dictating the C1 pathways. Our finding reveals a desired switch in C1 selectivity and robust stability within Cox/Pd system, providing a new perspective for fine-tuning energy conversion processes through specific topological assembly.

Experimental Set‐Up for Measurement of Half‐Cell‐ and Over‐Potentials of Flow Batteries during Operation

The study of flow batteries (FBs) requires the development of tools able to evaluate their performance during operation in a reliable and simple way. In this work, we present an experimental set‐up that allows the on‐line monitoring of the half‐cells state of charge and apparent overpotentials on the positive and negative electrodes during battery operation. These measurements are feasible by using additional flow cells that include a reference electrode on each side. We used the experimental set‐up to study the performance of the vanadium system as well as a previously reported stable organic couple. The studies consisted on short cycling operation at different current densities and polarization curves at different flow rates and states of charge. By confirming previous results obtained for vanadium‐FBs and extending the analysis to further systems, we demonstrated that this approach provides a reliable deeper insight into the battery performance and the processes taking place during operation.

Closed-Loop and Precipitation-Free CO2 Capture Process Enabled by Electrochemical pH Gradient.

Carbon dioxide (CO2) capture is a crucial negative-emission technology for the mitigation of climate change and global warming. The urgent need of combating climate change motivates the research and development of economical, effective and environmentally benign processes for CO2 capture. Herein, we design and report a flow cell for the CO2 capture from air or flue gas in a precipitate-free and closed-loop manner. No ion-exchange membrane is used in the electrolyser. The water electrolysis produces acidic solution near the anode and alkaline solution near the cathode, while generating valuable hydrogen and oxygen byproducts. The dilute CO2 in air or flue gas is captured by the alkaline solution, which is then mixed with the acidic solution to release the concentrated CO2. The process operates in a cyclic manner as driven by the water electrolysis and the mechanical pumping. No precipitation of calcium carbonate is involved for fixing CO2, which may simplify the separation process and minimizing the materials loss. The simple process enabled by electrochemical pH gradient shows promise for efficient CO2 capture on both small and large scales.

Oxford Nanopore's 2024 sequencing technology for Listeria monocytogenes outbreak detection and source attribution: progress and clone-specific challenges.

Whole genome sequencing is an essential cornerstone of pathogen surveillance and outbreak detection. Established sequencing technologies are currently being challenged by Oxford Nanopore Technologies (ONT), which offers an accessible and cost-effective alternative enabling gap-free assemblies of chromosomes and plasmids. Limited accuracy has hindered its use for investigating pathogen transmission, but recent technology updates have brought significant improvements. To evaluate its readiness for outbreak detection, we selected 78 Listeria monocytogenes isolates from diverse lineages or known epidemiological clusters for sequencing with ONT's V14 Rapid Barcoding Kit and R10.4.1 flow cells. The most accurate of several tested workflows generated assemblies with a median of one error (SNP or indel) per assembly. For 66 isolates, the cgMLST profiles from ONT-only assemblies were identical to those generated from Illumina data. Eight assemblies were of lower quality, with more than 20 erroneous sites each, primarily caused by methylations at the GAAGAC motif (5'-GAAG6mAC-3'/5'-GT4mCTTC-3'). This led to inaccurate clustering, failing to group isolates from a persistence-associated clone that carried the responsible restriction-modification system. Out of 50 methylation motifs detected among the 78 isolates, only the GAAGAC motif was linked to substantially increased error rates. Our study shows that most L. monocytogenes genomes assembled from ONT-only data are suitable for high-resolution genotyping, but further improvements of chemistries or basecallers are required for reliable routine use in outbreak and food safety investigations.

Effects of Tooth Desensitizers on Streptococcus mutans Biofilm Formation Using a Modified Robbins Device Flow Cell System.

This study aimed to assess the antibiofilm effects of dentin desensitizers using a modified Robbins device flow cell system. The test desensitizers were Saforide, Caredyne Shield, and Clinpro White Varnish. Standardized dentin specimens were prepared from human single-rooted premolars, treated with one of the materials, and mounted on the modified Robbins device flow cell system. Streptococcus mutans biofilms were developed for 24 h at 37 °C under anaerobic conditions. Scanning electron microscopy, fluorescence confocal laser scanning microscopy, viable and total cell counts, acid production, and gene expression analyses were performed. A wavelength-dispersive X-ray spectroscopy electron probe microanalyzer was used to analyze the ion incorporations. Clinpro White Varnish showed the greatest inhibition, suggesting its suppression of bacterial adherence and transcription of genes related to biofilm formation. Saforide reduced only the number of viable bacteria, but other results showed no significant difference. The antibiofilm effects of Caredyne Shield were limited. The uptake of ions released from a material into dentin varies depending on the element. Clinpro White Varnish is effective for the short-term treatment of tooth sensitivity due to dentin demineralization. It prioritizes remineralization by supplying calcium and fluoride ions while resisting biofilm formation.

Investigating the IgM and IgG B Cell Receptor Repertoires and Expression of Ultralong Complementarity Determining Region 3 in Colostrum and Blood from Holstein-Friesian Cows at Calving.

In cattle, colostral maternal immunoglobulins and lymphocytes transfer across the neonate's intestinal epithelium to provide protection against pathogens. This study aimed to compare repertoires of B cell populations in blood and colostrum in cows for the first time, with an emphasis on ultralong complementarity determining region 3 (CDR3, ≥40 amino acids). Blood mononuclear cells (BMCs, n= 7) and colostral cells (n = 7) were isolated from Holstein-Friesian dairy cows. Magnetic-activated cell sorting was used to capture IgM and IgG B cells from BMCs. Colostral cells were harvested by centrifugation. RNA was extracted and cDNA was produced; IgM and IgG transcripts were amplified using polymerase chain reactions. Amplicons were sequenced using the Nanopore Native barcoding kit 24 V14 and MinION with R10.4 flow cells. In colostrum, there was a significantly greater percentage of IgM B cells with ultralong CDR3s (8.09% ± 1.73 standard error of the mean) compared to blood (4.22% ± 0.70, p = 0.05). There was a significantly greater percentage of IgG B cells in colostrum with ultralong CDR3s (12.98% ± 1.98) compared to blood (6.61% ± 1.11, p = 0.05). A higher percentage of IgM and IgG B cells with ultralong CDR3s in colostrum may be indicative of a potential role in protecting the neonate.