Air Cells Research Articles

Beyond metal–air battery, emerging aqueous metal–hydrogen peroxide batteries with improved performance

AbstractThe aqueous metal–H2O2 batteries have been paid rapidly increasing attention due to their large theoretical energy densities, attractive power density, and multiple applications (air, land, and sea), especially in low‐content oxygen or nonoxygen conditions in which metal–air cells are out of work. However, the requirements of metal–H2O2 batteries are different due to the order of metal activities (Mg > Al > Zn) as well as metal–air cells. Aqueous metal–H2O2 batteries mainly include Al–H2O2, Mg–H2O2, and Zn–H2O2 batteries with the respective scientific problems, including battery structures, single/dual‐electrolyte systems, electrocatalysts for O2 reduction/evolution reactions, H2O2 reduction/production/decomposition, and the designability of anode to inhibit self‐corrosion. In this review, we summarized battery architectures, possible mechanisms, and recent progress in metal–H2O2 batteries, including Al–H2O2, Mg–H2O2, and Zn–H2O2 batteries. Several perspectives are also provided for these research fields, which may be focused on in the future.

An Innovative Non-destructive Technology for Controlling the Storage Period of Chicken Eggs Using Egg Parameters

We proposed here a non-destructive technology for pre-sorting eggs into subclasses characterized by a specifical acceptable shelf life and quality requirements. Egg characteristics were identified suiting a predictive model for controlling storage periods. Accordingly, the relationships of egg parameters were assessed, with weight loss (ΔW) during storage being the best indicator of changes in egg contents variables. Using changes in ΔW, we established three indicators with the maximum effect on fast egg drying and shrinkage. These included egg weight (W), egg volume-to-surface area ratio, and air cell diameter. The relationship formulae were derived to estimate the ΔW value accurately. This approach enables to judge regarding the potential of each particular egg subclass for its acceptable weight shrinkage and assign an optimal storage period for it. The proposed non-invasive analytical method can be implemented in industrial conditions for both table and hatching eggs with the available set of automated technological equipment.

Effect of using three types of vinegar on the quality and Shelf Life of table egg


 
 
 
 The current investigation was conducted to study the effectiveness of apple, grape and lemon vinegar coating in the shelf life of table eggs stored under room and refrigerator conditions for eight weeks. Two –hundred and forty table eggs from broiler breeder 57 weeks old were taken in the field and divided into eight treatments in two conditions, each including four treatments. T1 (control group) 60 eggs, T2 (apple vinegar) 60 eggs, T3 (lemon vinegar) 60 eggs and T4 (grape vinegar) 60 eggs were studied for eight weeks to evaluate egg quality characteristics after each two weeks and internal chemical compounds in the last week. The result showed a significant (P≤0.01) improvement of egg weight (g) in T2 and T3 in refrigerator conditions compared toT1, which recorded the lowest egg weight and decreased egg weight loss. Moreover, albumin height (mm) was increased while albumin diameter decreased, and yolk index significantly (P≤0.01) increased in refrigerator conditions.
 Additionally, air cells were significantly (P≤0.01) decreased in all vinegar-sprayed eggs, particularly in apple and grape treatments in both conditions. Three types of vinegar significantly (P≤0.01) improved moisture content by about 4%, and 2% in refrigerator condition. Results in this study indicate that using 5% of apple, lemon and grape vinegar solution of coating table egg extends egg-shelf life from one month to two months and more without negatively affecting the quality and quantity of eggs.
 
 
 
 

Surface passivation for efficient and stable perovskite solar cells in ambient air: The structural effect of amine molecules

Amine-based molecules are frequently utilized for defect passivation in perovskite films. However, the passivation effect can vary considerably depending on the structural differences of the amine molecules. In this study, we selected small-sized formamidine iodide (FAI), long-chain octylammonium iodide (OAI), and aromatic nicotinic acid (NA) to passivate surface defects in perovskite films. The charge transport in perovskite solar cells (PSCs) was inhibited by the excessively long alkyl chain of OAI but was enhanced by the π-conjugated structure of NA. Consequently, the power conversion efficiency (PCE) of OAI and NA-passivated PSCs decreased by 0.91% and increased by 0.23%, respectively. Interestingly, FAI was found to react preferentially with the PbI2 at the grain boundary of perovskite films, promoting secondary grain growth and resulting in a 21% increase in grain size. Due to the reduction in grain boundaries and the combined passivation of MA+ and I− vacancies, the PCE of FAI-passivated PSCs increased from 18.63% to 19.35% in ambient air and maintained 91% of their initial values after 76 days of storage under conditions of 20 ± 5 °C and <5% RH. This study introduces a promising strategy for selecting an appropriate amine molecule for surface passivation in efficient and stable fully-ambient air processed PSCs.

Correlative Study of High-Resolution Computed Tomography Temporal Bone with Intraoperative Findings in Tympanomastoid Surgery

Abstract Introduction: The global incidence of chronic otitis media (COM) is approximately 4.76 per thousand, with 31 million cases causing various complications. Most of these patients require one of the various forms of mastoid surgeries. High-resolution computed tomography (HRCT) has greatly improved the ability to assess both bony architecture and soft-tissue status. Aim: The aim is to assess the correlation of HRCT temporal bone with intraoperative findings in tympanomastoid surgery and to evaluate the sensitivity, specificity, positive predictive value, and negative predictive value of HRCT temporal bone. Materials and Methods: This prospective study was conducted in the Department of Otorhinolaryngology, SDM College of Medical Sciences and Hospital, Dharwad from November 2012–April 2014. Fifty patients of COM were taken up for study who underwent preoperative HRCT temporal bone followed by appropriate tympanomastoid surgery. Results: HRCT temporal bone showed increased sensitivity and specificity in detecting ossicular chain erosion and soft tissue abnormality within the middle ear and mastoid air cells. Facial nerve canal erosion was correctly detected in 62.50%, and overall agreement between surgical findings and the scan was high (90%). It also showed a very high specificity of 95.24%. For semicircular canal erosion and dural plate erosion, sensitivity was 50% each, specificity was 100% and had a very good correlation with surgical findings. Two cases of erosion of the posterior bony wall of the external auditory canal were correctly detected by the HRCT scan. Conclusion: HRCT temporal bone was found to have a high overall correlation with surgical findings and can be a useful method for early diagnosis of complications of COM and preoperative assessment.

Multifunctional Regulation of SnO2 Nanocrystals by Snail Mucus for Preparation of Rigid or Flexible Perovskite Solar Cells in Air.

Tin oxide (SnO2) is widely used as an inorganic electron transport layer (ETL) for rigid and flexible perovskite solar cells (PSCs). In this work, an extract of snail shell, the sodium salt of polyaspartic acid (S-PASP), a water-soluble polypeptide polymer, has been used to multifunctionally regulate SnO2 nanograins. S-PASP has a strong chelating and dispersing effect; thus, chemically adsorbed SnO2 can inhibit agglomeration. The S-PASP:SnO2 ETL also improved the extraction and transferability of carriers, reducing body defects and interfacial charge. Moreover, the S-PASP:SnO2 ETL promotes the vertical growth of the perovskite crystals due to its bottom-up morphology, wettability, and strain release, which is conducive to improving the photoelectric performance of the device. The optimized rigid device prepared under open-air conditions obtained a PCE of 20.92%. In addition, due to the stress compensation of the S-PASP long chain, which prevented the cracking and displacement of the ETL, the optimal PCE of the flexible device was 17.96%, and the initial efficiency was maintained at 82.8% after 100 bends. This work introduces a molecular doping mechanism for organic-inorganic hybrid electronics.

Structural and optical characterization of beta-gallium oxide

Demands for cheaper solar cells have led researchers to less complex, low-temperature, vacuum-free thin-film deposition processes, like spray pyrolysis and sol–gel spin coating. Previous studies of β-Ga2O3 thin-film deposition have used aqueous solutions of gallium nitrate which have strong tendencies to form hydroxide precipitates. This leads to the blockage of spray gun nozzles. To avoid precipitation, tetrahydroxogallate (III) ammonium was used as a novelty precursor in this study for the synthesis of β-Ga2O3. In the spray pyrolysis technique, the precursor was deposited on sapphire substrates at 200 ℃, with a carrier gas pressure of 200 kPa. The same precursor, with added monoethanolamine to enhance viscosity, was used in the spin coating method. A polycrystalline β-Ga2O3 structure was obtained by post-annealing films at 750 ℃ in ambient air. The spin-coated films with thicknesses ranging from 165 to 354 nm exhibited an average crystallite size of 17.78 nm and an optical band gap range between 4.80 eV and 4.95 eV. Films produced by spray pyrolysis had thicknesses ranging between 158 and 255 nm, an average crystallite size of 17.55 nm, and a band gap ranging between 4.69 eV and 4.93 eV. From Raman spectroscopy, the molecular vibrational modes Ag and Bg were detected, featuring three blue shifts and two red shifts. Films showed a UV-blue region originating from oxygen and gallium vacancies in the lattice, an important characteristic for good photodetectors and vital for solar cell passivation. When utilizing β-Ga2O3 as dielectric coating, the refractive index between air and solar cells is reduced, enhancing solar energy absorption. Similar results were obtained for both synthesis techniques confirming the reliability of the methods.

Sex Estimation From Measurements of the Mastoid Triangle and Volume of the Mastoid Air Cell System Using Classical and Machine Learning Methods: A Comparative Analysis.

Previous studies on the sexual dimorphism of the mastoid triangle have typically focused on linear and area measurements. No studies in the literature have used mastoid air cell system volume measurements for direct anthropological or forensic sex determination. The aims of this study were to investigate the applicability of mastoid air cell system volume measurements and mastoid triangle measurements separately and combined for sex estimation, and to determine the accuracy of sex estimation rates using machine learning algorithms and discriminant function analysis of these data. On 200 computed tomography images, the distances constituting the edges of the mastoid triangle were measured, and the area was calculated using these measurements. A region-growing algorithm was used to determine the volume of the mastoid air cell system. The univariate sex determination accuracy was calculated for all parameters. Stepwise discriminant function analysis was performed for sex estimation. Multiple machine learning methods have also been used. All measurements of the mastoid triangle and volumes of the mastoid air cell system were higher in males than in females. The accurate sex estimation rate was determined to be 79.5% using stepwise discriminant function analysis and 88.5% using machine learning methods.

Quantification of Mastoid Air Cells and Opacification of the Middle Ear in Primary Ciliary Dyskinesia.

To evaluate pneumatization and opacification of the temporal bone on computed tomography (CT) images in patients with primary ciliary dyskinesia (PCD). Retrospective case-control study. Tertiary referral center. Fifteen patients with PCD (30 ears) and 45 age-matched individuals without PCD (90 ears) as controls. Diagnostic only. Quantification of mastoid air cells in the PCD and control groups and comparison between them. Degree of middle ear opacification on CT images of the temporal bone in the PCD group. The volume of the mastoid air cells was 30% smaller in the PCD group than in the control group ( p < 0.05). The suppression ratio, which is defined to indicate how much the average volume of mastoid air cells in the PCD group is suppressed relative to the control group, was 64% lower in the PCD group ( p < 0.05). Opacification was noted in 47% of the mastoid air cells and 63% of the tympanic cavity on CT images of the temporal bone in the PCD group, which were significantly higher frequencies than in the control group (1.1% and 1.1%, respectively). Compared with individuals without PCD, those with PCD showed a significantly smaller volume of mastoid air cells and a significantly higher frequency of opacification of mastoid air cells and tympanic cavity on temporal bone CT. Otitis media raises suspicion for PCD, and the otological manifestations of PCD reported here could help to narrow the differential diagnosis and facilitate early treatment.

Physical property changes promoting shelf-life extension of soy protein-based high moisture meat analog under high pressure treatment.

The effects of high pressure treatment were investigated on the physical properties and possible shelf-life extension of soy protein-based high moisture meat analog (S-HMMA) produced by the extrusion process. High pressure treatment was applied at 200, 400 and 600MPa for 5, 10 and 15min. Physical properties of S-HMMA including appearance, moisture content, color and texture were analyzed during storage at 4°C for 8weeks. Higher pressure and longer storage time significantly reduced moisture content by creating more air cells and increasing cavitation. L* value of S-HMMA products increased at higher levels of pressurization while increasing storage time tended to decrease lightness. The unpressurized control S-HMMA product showed increasing hardness and toughness, while S-HMMA products subjected to various pressures exhibited higher hardness and toughness over time compared to the control sample at 200-400MPa. Products treated with high pressure (600MPa) showed the highest reductions in microbial growth but the aroma of the beans became more pronounced.

Pre-Operative Predictors of Ossicular Status in Chronic Supportive Otitis Media

Introduction: Chronic suppurative otitis media is associated with ossicular necrosis. Both safe and unsafe CSOM have incidence of ossicular necrosis. This study will provide the much-needed insight, into the factors which can act as significant predictors for the intra operative ossicular status, and help in better preparing the patient before the surgery and need for ossiculoplasty. Furthermore, narrowing down to the most significant ly related predictors, it may also be»possib1eto reduce the financial burden on the patient, something which is of prime importance in a resource limited country like ours. Objectives: pre-operative predictors of intra operative ossicular status in chronic suppurative otitis media and effect of duration of disease on hearing threshold and ossicular-status. Material and methods: A descriptive observational study was done in a Tertiary care referral center. A total number of 124 patients with the clinical diagnosis of CSOM were selected from outpatient department and admitted. All patients were subjected to otoendoscopy, X-raymastt), 1d (Schiller’s view) and pure tone audiometry. All patients underwent tympanomastoidectomy. Preoperative findings on the basis of history, examination and investigations were noted along with findings of intraoperative ossicular status. Findings were tabulated and statistical test were applied to determine significant preoperative predictors of iv intraoperative ossicular status. Results: Intraoperative ossicular necrosis was seen in a total number of 43 patients. On; univariate analysis, blood-stained discharge (P&lt;0.0001), purulent consistency of ear discharge (0&lt;0.0()01), associated symptoms of vertigo (p=0.0047), otalgia (p=0.0019), size(p=0.0042) and f site(p=0.004l), severity of hearing loss (p=0.004), sclerotic mastoid air cell (p=0.0001) had significant association with ossicular necrosis. The duration of disease and hearing threshold did not have statistically significant association (p=0.227). Conclusion: Ossicular necrosis is best indicated by the presence blood-stained and purulent discharge, vertigo, otalgia, total perforation, severe degree of hearing loss and sclerosed mastoid. Incus was the most common necrosed ossicle followed by malleus followed by stapes, Duration of disease did not have a significant connotation with hearing threshold.

Impact of moisture content on microstructural, thermal, and techno-functional characteristics of extruded whole-grain-based breakfast cereal enriched with Indian horse chestnut flour

The use of non-conventional seed flour is of interest in obtaining healthy breakfast cereals. The research aimed to study the physico-functional, bioactive, microstructure, and thermal characteristics of breakfast cereals using scanning electron microscopy, X-ray diffractometry, and differential scanning calorimeter. The increase in feed moisture content (16 %) enhanced the bulk density (5.24 g/mL), water absorption index (7.76 g/g), total phenolic content (9.03 mg GAE/g), and antioxidant activity (30.36 %) having desirable expansion rate (2.84 mm), water solubility index (48 %), and color attributes. The microstructure showed dense inner structures with closed air cells in extruded flours.Extrusion treatment rearranged the crystalline structure from A-type to V-type by disrupting the granular structure of starch, reducing its crystallinity, and promoting the formation of an amylose–lipid complex network. Increasing conditioning moisture enhanced the degree of gelatinization (%), peak gelatinization temperature (Tp), and starch crystallinity (%) and reduced the gelatinization enthalpy (ΔHG) and gelatinization temperature ranges. The results reported in this study will help industries to develop innovative and novel food products containing functional ingredients.

Giant primary intracranial multi-fossa leiomyosarcoma involving the frontal sinus, ethmoid air cells, anterior fossa, middle fossa, and intraventricular space: A case report and literature review

Background: Leiomyosarcomas (LMSs) is a type of sarcoma that arises from smooth muscle and generally presents in the abdomen. Although intracranial LMS has been identified before, most reported presentations have been in immunocompromised patients. Here, we present an intracranial LMS in an immunocompetent patient. Case Description: A 22-year-old male with a history of an atypical pineal parenchymal tumor of intermediate differentiation resected by suboccipital craniotomy at the age of 12 followed by adjuvant radiation therapy, presented with 3 weeks of decreased appetite, weight loss, and lethargy. He subsequently underwent transbasal approach skull base tumor resection. Histologic examination of the mass along with the patient’s history of radiation was supportive of a low-grade, radiation-induced LMS arising from the anterior fossa of the skull or meninges and extends to the frontal sinus and ethmoid air cells. Conclusion: Primary intracranial LMS is an extremely rare diagnosis and presenting symptoms vary with the location and size of the tumor. Due to the poor specificity of clinical symptoms, diagnosis is often based on histology. The most common treatment is surgical resection. Adjuvant chemotherapy with various agents has been found to be somewhat effective outside the central nervous system. When LMS does occur, a history of immunocompromised state or previous radiation exposure is often present. Pathological confirmation is required for an appropriate diagnosis.

Otoscopic, radiological and audiological status of the contralateral ear in patients with unilateral chronic suppurative otitis Media

As the disease process does not affect both the ears simultaneously in all the cases, it is possible to identify in early stages of the disease process and arrest further progression by timely intervention. Hence, we aim to study the anatomical and functional changes in contralateral ear (CLE) in pts with unilateral CSOM. prospective observational study, of 75 patients attending the OPD of JLN hospital and research center, Bhilai, with unilateral CSOM, with intact TM in CLE were evaluated by otoscope, PTA, Impedance audiometry and CT temporal bone. Above observations were recorded and analyzed. 44% in our study showed abnormal TM, most common was TM retraction, seen in 22.66%. PTA showed mixed hearing loss in 5.33% and normal hearing in 66.66%. Impedance audiometry had A type graph in 82.66%, As type in 10.66%. Compliance was normal in 82.66% and decreased in 10.66%. Pressure was normal in 97.33% and was decreased in 2.66%. Normal, well pneumatized air cells in HRCT temporal bone seen in 90.66% and opacified in 12%.A detailed otoscopic evaluation of the contralateral ear plays a vital role in early diagnosis of the pathology affecting the contralateral ear. Audiological evaluation of the contralateral ear by audiometry and tympanometry provides a pathway for detecting the functional abnormalities in the contralateral ear at an early stage. Knowing the radiological status of the contralateral ear can guide us to monitor the disease progression and plan accordingly.

Risk Factors for Chronic and Recurrent Otitis Media in Children: A Review Article.

Otitis media is an inflammation of the mucous membrane of the middle ear, which includes mastoid air cells, the middle ear cavity, the Eustachian tube, and the mastoid antrum. Otitis media can be either acute, less than six weeks, or chronic, which lasts for more than six weeks. Recurrent otitis media refers to three episodes of the disease occurring within six months or four episodes within one year. There are many risk factors for otitis media among children; however, some of such factors may vary based on the type of otitis media. To highlight the risk factors of chronic and recurrent otitis media in pediatrics. Scientific databases were used to search for articles related to our objective. Various terms were used for the search process. The types of articles included in our review were original articles, review articles, meta-analyses, and systematic reviews written in the English language and concerned with our subject. The topic was discussed under four main titles; the first overviewed the prevalence and risk factors of otitis media, the second title discussed chronic otitis media and its risk factors, the third title discussed recurrent otitis media and its risk factors, and the last title discussed the risk factors of both chronic and recurrent otitis media. There are various risk factors for chronic and recurrent otitis media, and they include allergy, passive smoking, male gender, and snoring. Also, genetics may have a common role, but this needs further investigation.

Impact of soy protein dispersibility on the structural and sensory properties of fat-free ice cream

Soy protein can be an effective fat replacer in ice cream due to its contribution to the viscosity and foaming ability. In this study, we investigated the individual effect of soy protein particle size and mix viscosity on the physical, rheological, tribological and sensory properties of fat-free ice cream. Particle size was varied by homogenization and subsequent separation of the dispersible and non-dispersible fractions. Three series of ice cream mixes were made in which (i) particle size and viscosity were varied, (ii) particle size was varied with a constant viscosity, and (iii) the ratio between the dispersible and non-dispersible protein fractions, particle size and viscosity were varied. The results showed that dispersible protein particles (0.25 μm) led to lower hardness and higher scoopability as their presence was related to increased overrun and reduced non-air thickness between the air cells. In comparison, large non-dispersible particles (3.8–145 μm) enhanced the melting resistance and stability of ice cream by forming a network in the serum phase. Therefore, the size of the protein particles determined their functionality in ice cream. Based on sensory evaluation, samples with a protein particle size of approximately 4 μm showed a relatively denser texture, a lower melting rate and better lubrication behavior (lower friction), as well as a sensory profile similar to that of full-fat ice cream. This study indicates that both textural and sensory properties of fat-free ice cream can be improved by manipulating the size of plant proteins and mix viscosity.

Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt

Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt

Mastoid fluid signal in acute cerebral venous thrombosis is is associated with increased clot burden

PurposeMastoid air cell abnormalities in the form of hyperintense T2 fluid signal have been reported in cases of acute Cerebral Venous Thrombosis (CVT) without otologic infection and have been hypothesized to be a result of venous congestion rather than infectious mastoiditis. The aim of this study was to investigate a link between the spectrum of mastoid abnormalities and clot burden in patients with acute CVT. MethodsA retrospective study of adult patients admitted to the National Institute of Mental Health and Neurosciences between 2016 and 2023 who were diagnosed with acute CVT and had no clinical evidence of active or recent ear infections was conducted. Pre- and post-contrast MR Images were analyzed to identify the dural sinuses and/or cerebral veins involved and the presence of fluid signal in the mastoid. Fluid signal in the mastoid was graded from 0 to 3 as described by Shah et al- no fluid signal (grade 0), thin curvilinear hyperintensities (grade 1), thick crescenteric hyperintensities (grade 2), and complete hyperintensity (grade 3). Clot Burden Score (CBS) was calculated by assigning one point for each sinus involved, one point for extension of thrombus into the intracranial Internal Jugular Vein (IJV), one point for thrombosis of cortical veins and one point for thrombosis of deep cerebral veins. ResultsA total of 89 patients with acute CVT were included in the final analysis. Median time from presentation to MRI was 2 days (range 0–13). 51 patients (57.3%) had fluid signal in the mastoid air cells on T2-weighted images, of whom 33 showed mucosal contrast enhancement. Higher grade of fluid signal in the mastoid was present ipsilateral to the side of venous thrombosis in 59 out of 60 patients with posterior fossa CVT. CBS was significantly different between patients with different grades of fluid signal (p = 0.002). Grade 2–3 fluid signal was associated with higher clot burden (CBS > 3) in both the entire study population (n = 89) – OR = 8.281, 95 %CI: 2.758–24.866 (p < 0.001) and among patients with posterior fossa CVT – OR = 4.375, 95 %CI: 1.320–14.504 (p = 0.016). Among patients with posterior fossa CVT, grade 2–3 fluid signal was associated with left sided transverse and/or sigmoid sinus thrombosis – OR = 5.600, 95 %CI: 1.413–22.188 (p = 0.014), and extension of thrombosis into the IJV – OR = 4.606, 95 %CI: 1.162–18.262 (p = 0.030). ConclusionT2 fluid signal in the mastoid is associated with venous congestion in adults with acute CVT without evidence of otologic infection. Moderate-to-severe T2 fluid signal in the mastoid air cells is associated with increased clot burden.

Design and Verification of an Automated Pressure Mapping System and Modulating Air Cells for Pressure Ulcer Prevention

This research focuses on developing an intelligent air mattress prototype based on commercially available alternating pressure air mattresses to prevent pressure ulcers. Force-sensitive resistors (FSRs) are installed under each air cell to measure interface pressure values occurring at different parts of the body. These collected values are then used to create pressure maps, indicating areas of high overpressure. The prototype incorporates a smart pneumatic control system divided into seven functional areas: head, back, waist, buttocks, thighs, calves, and heels. All operations are performed using LabVIEW software.

Highly Stable Protonic Ceramic Electrolysis Cells Based on Air Electrodes with Finger-Like Pores Current Collection Layers Running in High-Steam-Content Air.

The steam content in the air electrode is one of the major factors determining the efficiency and stability of protonic ceramic electrolysis cells (PCECs). In this work, the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) current collection layer (CCL) film with unique finger-like pores was successfully prepared by the phase-inversion tape-casting technique (PT), which promoted the gas diffusion inside the electrode and effectively improved the stability of the single cell in high-humidity air. A screen-printed LSCF-BaCe0.7Zr0.1Y0.1Yb0.1O3 catalytic active layer (CAL) was also applied to match the thermal expansion coefficient (TEC) values and improve the interface combination. The electrochemical impedance spectroscopy (EIS) and distribution of relaxation time (DRT) studies of the symmetric cells showed that when the film was used to match different CALs as an air electrode, the gas diffusion inside the electrode was no longer restricted by the increasing steam content in air. The single cell exhibited a high electrolysis current density of 1 A cm-2 (1.25 V) at 650 °C; furthermore, no performance degradation was observed in this high current density when electrolyzed in air with 40 and 60% humidity for more than 250 h. These results present a simplified and economical scheme to develop air electrodes with high stability in wet air with a high steam content.