3D Cell Research Articles

Cytotoxic and Radiosensitizing Effects of European and African Propolis in 3D Lung Carcinoma Cell Cultures.

Natural compounds such as propolis have gained wide popularity in the last decades. While its antibacterial, antiviral, and antifungal properties are well known, the anticancer properties of propolis are just beginning to be appreciated. Herein, we comparatively investigate the cytotoxic and radiosensitizing potential of four different ethanolic propolis extracts originating from three different countries (Germany, Ireland, South Africa) in human lung cancer cell models. Liquid chromatography-mass spectrometry (LC-MS/MS) was applied to characterize the four different propolis extracts. Cytotoxicity and radiation survival were determined by 3D matrix-based clonogenic assays and autophagy was examined by western blotting. We found cytotoxicity in a propolis type-, time- and cell model- dependent manner. In the four ethanolic propolis extracts, Coumaric acid, Caffeic acid phenethyl ester, Pinocembrin and Chrysin presented the major compounds identified. Examining the induction of autophagy using the marker LC3B and autophagy inhibition with chloroquine suggested autophagy to be part of the survival mechanisms upon propolis treatment in a cell model-dependent manner. Combining propolis with X-ray irradiation showed the radiosensitizing potential of propolis in human lung cancer cell models, which clearly presented in a manner dependent on the incubation time of propolis and the cell model treated. Propolis treatment showed cytotoxic and radiosensitizing effects of propolis on human lung cancer cells. Since these effects differ greatly between the four propolis extracts studied and originating from different regions, further studies are urgently needed to differentiate propolis species and their anticancer properties in more detail.

The Impact of 3D Tumor Spheroid Maturity on Cell Migration and Invasion Dynamics

Cell motility is crucial in cancer metastasis, and understanding its regulation in tumor cells is vital for developing anti-metastatic therapies. Traditional 2D cell culture assays provide insights into cell migration but fail to replicate the complex 3D architecture of tissues in vivo. 3D cell culture models like tumor spheroids have been applied for cell migration tests. This study investigates the role of spheroid maturity in tumor cell motility, hypothesizing that spheroid maturity mirrors physiological conditions in solid tumors. Human prostate (DU145), breast (MCF-7), and murine breast (EMT-6) cancer cells were cultured into spheroids of varying ages (3, 7, and 11 days). The migration and invasion of these spheroids were analyzed, revealing that 11-day-old DU145 spheroids demonstrated the greatest horizontal migration, correlating with RNA-seq data showing increased cell adhesion, cytoskeleton dynamics, and motility pathways. Confocal microscopy and single-cell analysis indicated higher reactive oxygen species (ROS) levels in mature spheroids, potentially activating motility pathways. Additionally, DU 145 spheroids were treated with chemotherapy reagent Doxorubicin (DOX), and the results showed that spheroids culture for 7 and 11 days exhibited greater resistance to DOX compared to spheroids cultured for 3 days. These findings highlight the importance of considering spheroid maturity in cancer research and drug development, emphasizing the need for systematic analysis of spheroid growth conditions to ensure reproducible and reliable experimental settings.

Melanoma-on-a-chip model for anticancer drug injecting delivery method

The pharmaceutical and cosmetic industries are encountering a challenge in adopting new study models for product development. there has been a growing interest in organ-on-a-chip systems, and particularly for generating skin models. While numerous alternatives replicating high-fidelity skin models exist, there is a notable absence of melanoma study's methodology specifically on these microfluidic chips. This work introduces a novel skin-on-a-chip device featuring two microfluidic chambers, facilitating a 3D cell co-culture involving fibroblasts, keratinocytes, and melanoma cells. The design of this organ-on-a-chip has enabled the administration of the anticancer treatment Gemcitabine using an injection system within the chip. The results of this work have shown a significant impact on the co-culture distribution of cells, decreasing the population of cancerous cells after the administration of Gemcitabine. The work presented in this article demonstrates the effectiveness of the chip and the administration method for testing anti-melanoma therapies and position this technology as an enhanced fidelity model for studying melanoma while providing an alternative for real-time monitoring of drug testing.

Microfluidic device-assisted 3D cell spheroids isolation, staining and embedding

3D cell spheroids have emerged as indispensable tools in cell biology research. In this study, the efficacy of an open-close switchable microfluidic device for on-chip staining and agar-embedding of 3D spheroids was thoroughly validated, especially in preparation for immunohistochemistry (IHC) analysis. The on-chip staining procedure, employing Trypan blue and Calcein-AM/PI staining, was demonstrated to evaluate the cell viability of spheroids. During overextended culture periods, a discernible decline in cell viability was observed at the central region of the spheroids, offering valuable information on the temporal aspects of spheroid development. On-chip agar embedding stands out for its precise control over the location and orientation of three-dimensional spheroids, a key factor in exploring cellular architecture, especially in fused spheroids using IHC analysis. In comparison to tube-based staining, this method significantly cuts down on reagent use and analysis time. This not only boosts efficiency but also lowers the risk of spheroid damage or loss during staining, highlighting its potential for handling miniaturized tissue samples and biopsies in cell assays. The on-chip staining and agar-embedding techniques presented here not only provide valuable insights into spheroids’ behavior but also pave the way for further developments in miniaturized tissue analysis and cell-based assays.

Identification of CD44 as a key engager to hyaluronic acid-rich extracellular matrices for cell traction force generation and tumor invasion in 3D

Mechanical properties of the extracellular matrix (ECM) critically regulate a number of important cell functions including growth, differentiation and migration. Type I collagen and glycosaminoglycans (GAGs) are two primary components of ECMs that contribute to mammalian tissue mechanics, with the collagen fiber network sustaining tension, and GAGs withstanding compression. The architecture and stiffness of the collagen network are known to be important for cell-ECM mechanical interactions via integrin cell surface adhesion receptors. In contrast, studies of GAGs in modulating cell-ECM interactions are limited. Here, we present experimental studies on the roles of hyaluronic acid (HA) in single tumor cell traction force generation using a recently developed 3D cell traction force microscopy method. Our work reveals that CD44, a cell surface receptor to HA, is engaged in cell traction force generation in conjunction with β1-integrin. We find that HA significantly modifies the architecture and mechanics of the collagen fiber network, decreasing tumor cells’ propensity to remodel the collagen network, attenuating traction force generation, transmission distance, and tumor invasion. Our findings point to a novel role for CD44 in traction force generation, which can be a potential therapeutic target for diseases involving HA rich ECMs such as breast cancer and glioblastoma.

PM2.5 Induces Developmental Neurotoxicity in Cortical Organoids

There is mounting evidence implicating the potential neurotoxic effects of PM2.5 during brain development, as it has been observed to traverse both the placental barrier and the fetal blood-brain barrier. However, the current utilization of 2D cell culture and animal models falls short in providing an accurate representation of human brain development. Consequently, the precise mechanisms underlying PM2.5-induced developmental neurotoxicity in humans remain obscure. To address this research gap, we constructed three-dimensional (3D) cortical organoids that faithfully recapitulate the initial stages of human cerebral cortex development. Our goal is to investigate the mechanisms of PM2.5-induced neurotoxicity using 3D brain organoids that express cortical layer proteins. Our findings demonstrate that exposure to PM2.5 concentrations of 5 μg/mL and 50 μg/mL induces neuronal apoptosis and disrupts normal neural differentiation, thereby suggesting a detrimental impact on neurodevelopment. Furthermore, transcriptomic analysis revealed PM2.5 exposure induced aberrations in mitochondrial complex I functionality, which is reminiscent of Parkinson's syndrome, potentially mediated by misguided axon guidance and compromised synaptic maintenance. This study is a pioneering assessment of the neurotoxicity of PM2.5 pollution on human brain tissues based on 3D cortical organoids, and the results are of great significance in guiding the formulation of the next air pollution prevention and control policies in China to achieve the sustainable improvement of air quality and to formulate pollution abatement strategies that can maximize the benefits to public health.

Simple and Cost-Effective Generation of 3D Cell Sheets and Spheroids Using Curvature-Controlled Paraffin Wax Substrates

The challenges associated with animal testing in pharmaceutical development have driven the search for alternative in vitro models that mimic human tissues more accurately. In this study, we present a simple and cost-effective method for generating 3D cell sheets and spheroids using curvature-controlled paraffin wax films, which are easily accessible laboratory materials that eliminate the need for extracellular matrix (ECM) components or thermo-responsive polymers. By adjusting the curvature of the paraffin wax film, we successfully generated human periodontal ligament fibroblast (HPdLF) cell sheets and bone marrow-derived mesenchymal stem cell (hBMSC) spheroids. Key parameters, such as cell density, substrate curvature, and incubation time, were identified as critical factors for optimizing the formation of these 3D structures. In addition, the use of quantum dots (QDs) for cell tracking enabled long-term visualization and distinction between different cell types within complex tissue-like structures. We further demonstrated that wrapping the hBMSC spheroids with HPdLF cell sheets partially replicated the connective tissue structure of the periodontal ligament surrounding the tooth root. This highlights the potential of this platform for the construction of more sophisticated tissue-mimicking assemblies. In conclusion, curvature-controlled paraffin wax films provide a versatile and practical approach for 3D cell cultures. This simplifies the generation of both cell sheets and spheroids, offering a promising tool for tissue engineering and regenerative medicine applications, where precise cell-to-cell interactions are essential.Graphical abstract

Tracking Small Extracellular Vesicles Using a Minimally Invasive PicoGreen Labeling Strategy.

Extracellular vesicles (EVs) are cell-secreted lipid bilayer delimited particles that mediate cellular communication. These tiny sacs of cellular information play an important role in cell communication and alter the physiological process under both normal and pathological conditions. As such, tracking EVs can provide valuable information regarding the basic understanding of cell communication, the onset of early malignancy, and biomarker discovery. Most of the current EV-tracking strategies are invasive, altering the natural characteristics of EVs by modifying the lipid bilayer with lipophilic dyes or surface proteins with fluorescent reporters. The invasive labeling strategies could alter the natural processes of EVs and thereby have major limitations for functional studies. Here, we report an alternative minimally invasive EV labeling strategy using PicoGreen (PG), a small molecule that fluoresces at 520 nm when bound to dsDNA. We show that PG binds to dsDNA associated with small EVs (50-200 nm), forming a stable and highly fluorescent PG-DNA complex in EVs (PG-EVs). In both 2D cell culture and 3D organoid models, PG-EV showed efficient tracking properties, including a high signal-to-noise ratio, time- and concentration-dependent uptake, and the ability to traverse a 3D environment. We further validated PG-EV tracking using dual-labeled EVs following two orthogonal labeling strategies: (1) Bioconjugation via surface amine labeling and (2) donor cell engineering via endogenously expressing mCherry-tetraspanin (CD9/CD63/CD81) reporter proteins. Our study has shown the feasibility of using PG-EV as an effective EV tracking strategy that can be applied for studying the functional role of EVs across multiple model systems.

ColMA‐based bioprinted 3D scaffold allowed to study tenogenic events in human tendon stem cells

AbstractThe advent of bioprinting has enabled the creation of precise three‐dimensional (3D) cell cultures suitable for biomimetic in vitro models. In this study, we developed a novel protocol for 3D printing methacrylated collagen (ColMa, or PhotoCol®) combined with tendon stem/progenitor cells (hTSPCs) derived from human tendon explants. Although pure ColMa has not previously been proposed as a printable hydrogel, this paper outlines a robust and highly reproducible pipeline for bioprinting this material. Indeed, we successfully fabricated a 3D bioengineered scaffold and cultured it for 21 days under perfusion conditions with medium supplemented with growth/differentiation factor‐5 (GDF‐5). This bioprinting pipeline and the culture conditions created an exceptionally favorable 3D environment, enabling the cells to proliferate, exhibit tenogenic behaviors, and produce a new collagen type I matrix, thereby remodeling the surrounding environment. Indeed, over the 21‐day culture period under perfusion condition, tenomodulin expression showed a significant upregulation on day 7, with a 2.3‐fold increase, compared to days 14 and 21. Collagen type I gene expression was upregulated nearly 10‐fold by day 14. This trend was further confirmed by western blot analysis, which revealed a statistically significant difference in tenomodulin expression between day 21 and both day 7 and day 14. For type I collagen, significant differences were observed between day 0 and day 21, as well as between day 0 and day 14, with a p‐value of 0.01. These results indicate a progressive over‐expression of type I collagen, reflecting cell differentiation towards a proper tenogenic phenotype. Cytokines, such as IL‐8 and IL‐6, levels peaked at 8566 and 7636 pg/mL, respectively, on day 7, before decreasing to 54 and 46 pg/mL by day 21. Overall, the data suggest that the novel ColMa bioprinting protocol effectively provided a conducive environment for the growth and proper differentiation of hTSPCs, showcasing its potential for studying cell behavior and tenogenic differentiation.

Familial Pancreatic Cancer Research: Bridging Gaps in Basic Research and Clinical Application

Familial pancreatic cancer (FPC) represents a significant yet underexplored area in pancreatic cancer research. Basic research efforts are notably limited, and when present, they are predominantly centered on the BRCA1 and BRCA2 mutations due to the scarcity of other genetic variants associated with FPC, leading to a limited understanding of the broader genetic landscape of FPC. This review examines the current state of FPC research, focusing on the molecular mechanisms driving pancreatic ductal adenocarcinoma (PDAC) progression. It highlights the role of homologous recombination (HR) and its therapeutic exploitation via synthetic lethality with PARP inhibitors in BRCA1/2-deficient tumors. The review discusses various pre-clinical models of FPC, including conventional two-dimensional (2D) cell lines, patient-derived organoids (PDOs), patient-derived xenografts (PDXs), and genetically engineered mouse models (GEMMs), as well as new advancements in FPC research.

Effects of patient pleural effusion fluids on the BBSome components expression of human benign mesothelial cells.

Malignant pleural mesothelial cells are affected by the extracellular milieu while such data on benign cells are scarce. Benign cells sense the extracellular environment with the Primary Cilium (PC) and its molecular complex, the BBSome, is critical for this process. Here we aimed at assessing the changes in BBSome genes expression in ordinary 2D and spheroid 3D cell cultures after incubation with pleural effusion fluids (PF) of several etiologies. Benign human mesothelial cells MeT-5A were incubated with PF from patients with mesothelioma (Meso-PF), breast cancer (BrCa-PF), hemothorax (Hemo-PF) and congestive heart failure (CHF-PF). Gene expression of BBS1, 2, 4, 5, 7, 9, 18 was assessed by quantitative real-time PCR (qRT-PCR) to monitor PF-induced gene expression changes. MeT-5A cell migration using the PC-modulating drugs ammonium sulfate (AS) and lithium chloride (LC) during PF incubation was also determined. BBSome gene expression upon influence of BrCa-PF and Hemo-PF was more pronounced in 2D compared to 3D, inducing global changes in 2D. CHF-PF and Meso-PF also induced changes in 2D but not as many, while in all cases MeT-5A grown in 3D were more resistant to the effects of the PF. Meso-PF decreased 2D cell migration, while the disturbance of PC in all PF cases resulted in decreased cell migration. These data suggest distinct BBSome molecular profile changes in benign mesothelial cells exposed to malignant and benign PF, in each case, in both 2D and 3D. Cell migration is sensitive to drug disturbance with PC modulators in PF-exposed cells.

The lncRNA AFAP1-AS1 is upregulated in metastatic triple-negative breast tumors and controls hypoxia-activated vasculogenic mimicry and angiogenesis

BackgroundVasculogenic mimicry (VM) is an alternative intratumoral microcirculation system that depends on the capacity of tumor cells to reorganize and grow in three-dimensional (3D) channel architectures like the capillaries formed by endothelial cells. Both VM and angiogenesis may coordinately function to feed cancer cells, allowing tumor growth. Long noncoding RNAs (lncRNAs) regulate critical cellular functions in cancer cells, including cell proliferation, apoptosis, angiogenesis, invasion, and metastasis. The lncRNA, known as actin filament-associated protein 1-antisense RNA 1 (AFAP1-AS1), has been described as an oncogene in diverse types of cancers. However, its role in VM and metastasis in triple-negative breast cancer (TNBC) is unknown.MethodsReverse transcription and quantitative polymerase chain reaction (RT‒qPCR) experiments were performed to evaluate the expression of 10 selected lncRNAs from literature in metastatic and nonmetastatic biopsies from TNBC patients. The expression of AFAP1-AS1 was analyzed in Genotype-Tissue Expression Genotype-Tissue Expression (GTEx) and The Cancer Genome Atlas (TCGA) datasets. The AFAP1-AS1 expression was knocked in TNBC Hs578T cells by transfection of specific siRNAs. Channel-like formation assays were performed using 3D cultures over Matrigel in hypoxia-treated Hs578T cancer cells with diminished expression of AFAP1-AS1. The angiogenesis tests were conducted using human umbilical vein endothelial cells (HUVECs) and AFAP1-AS1- silenced Hs578T cells on 3D cell cultures. The presence of VM (CD31-/PAS+) in tumor tissues from TNBC patients with and without metastasis was assessed through immunohistochemistry using endothelial marker CD31 antibodies and periodic acid-Schiff (PAS) staining.ResultsCompared with normal mammary tissues, AFAP1-AS1 expression was higher in breast cancer tissues. Moreover, AFAP1-AS1 expression was upregulated in the TNBC subtype compared to receptor-positive breast tumors. In addition, the expression of AFAP1-AS1 was correlated with the expression of the thirteen genes characteristic of a previously reported hypoxia signature. Interestingly, AFAP1-AS1 was upregulated in primary TNBC tumors from patients who developed metastasis compared with the nonmetastatic group. Functional analysis revealed that the knockdown of AFAP1-AS1 in Hs578T cells significantly impaired the hypoxia-induced VM, accompanied by a decrease in the development of 3D channel networks. Similarly, AFAP1-AS1 knockdown counteracts the angiogenic potential of cancer cells, as indicated by a reduction in the number of polygons, sprouting cells, and nodes in HUVEC cells. Remarkably, an increase in CD31-/PAS + staining of 3D channel networks in primary breast tumors from metastatic patients was found compared with the nonmetastatic group. Finally, we found that the number of blood vessels increased in the nonmetastatic group more than in the metastatic cohort.ConclusionsOur data suggested that AFAP1-AS1 controls both VM and angiogenesis in Hs578T breast cancer cells and that increased metastasis is associated with VM in TNBC patients.

Islet cell spheroids produced by a thermally sensitive scaffold: a new diabetes treatment

The primary issues in treating type 1 diabetes mellitus (T1DM) through the transplantation of healthy islets or islet β-cells are graft rejection and a lack of available donors. Currently, the majority of approaches use cell encapsulation technology and transplant replacement cells that can release insulin to address transplant rejection and donor shortages. However, existing encapsulation materials merely serve as carriers for islet cell growth. A new treatment approach for T1DM could be developed by creating a smart responsive material that encourages the formation of islet cell spheroids to replicate their 3D connections in vivo and controls the release of insulin aggregates. In this study, we used microfluidics to create thermally sensitive porous scaffolds made of poly(N-isopropyl acrylamide)/graphene oxide (PNIPAM/GO). The material was carefully shrunk under near-infrared light, enriched with mouse insulinoma pancreatic β cells (β-TC-6 cells), encapsulated, and cultivated to form 3D cell spheroids. The controlled contraction of the thermally responsive porous scaffold regulated insulin release from the spheroids, demonstrated using the glucose-stimulated insulin release assay (GSIS), enzyme-linked immunosorbent assay (ELISA), and immunofluorescence assay. Eventually, implantation of the spheroids into C57BL/6 N diabetic mice enhanced the therapeutic effect, potentially offering a novel approach to the management of T1DM.Graphical

Mimicking Urinary Tract Infections Caused by Uropathogenic Escherichia coli Using a Human Three-Dimensional Tissue Engineering Model

Uropathogenic Escherichia coli are the main causal agent of urinary tract infections. These diseases can affect more than half of women during their lifetime. Moreover, recurrent urinary tract infections can affect up to 30% of patients, leading to higher social and economic costs for the community. No efficient treatment against the recurrent form of the disease has been discovered. Due to the low average rate of successful translation from 2D cell culture and in vivo animal models into clinical trials, new models that mimic pathologies, such as those produced by tissue engineering, are needed. A model of human-derived 3D bladder mucosa was produced by tissue engineering techniques using collagen gels and organ-specific primary human stromal and epithelial cell populations. This model was used to mimic the different steps of a urinary tract infection: adhesion, invasion, intracellular bacterial community and quiescent intracellular reservoir formation and, finally, bacteria resurgence after umbrella cell exfoliation through chitosan exposure to mimic the recurrent infection. The uropathogenic strain UTI-89-GFP was used as infectious bacteria and BL-21-GFP strain as a control. Our model is unique and is the first step toward mimicking the different phases of a UTI in a human context.

Genetically Engineered Filamentous Bacteriophages Displaying TGF-β1 Promote Angiogenesis in 3D Microenvironments

Combined 3D cell culture in vitro assays with microenvironment-mimicking systems are effective for cell-based screening tests of drug and chemical toxicity. Filamentous bacteriophages have diverse applications in material science, drug delivery, tissue engineering, energy, and biosensor development. Specifically, genetically modified bacteriophages have the potential to deliver therapeutic molecules or genes to targeted tumor tissues. The engineered bacteriophages in this study significantly enhanced endothelial cell migration and tube formation within the extracellular matrix (ECM). Compared to TGF-β1 alone and non-modified phages, the presence of TGF-β1 on the bacteriophages demonstrated superior performance as a continuous stimulant in the microenvironment, effectively promoting these angiogenic processes. Assays, including RT-qPCR, ELISA, and fluorescence microscopy, confirmed the expression of angiogenic markers such as CD31, validating the formation of 3D angiogenic structures. Our findings indicate that the TGF-β1 displayed by bacteriophages likely acted as a chemotactic factor, promoting the migration, proliferation, and tube formation of endothelial cells (ECs) within the ECM. Although direct contact between ECs and bacteriophages was not explicitly confirmed, the observed effects strongly suggest that TGF-β1-RGD bacteriophages contributed to the stimulation of angiogenic processes. The formation of angiogenic structures by ECs in the ECM was confirmed as three-dimensional and regulated by the surface treatment of microfluidic channels. These results suggest that biocompatible TGF-β1-displaying bacteriophages could continuously stimulate the microenvironment in vitro for angiogenesis models. Furthermore, we demonstrated that these functionalized bacteriophages have the potential to be utilized as versatile biomaterials in the field of biomedical engineering. Similar strategies could be applied to develop angiogenic matrices for tissue engineering in in vitro assays.

Biomimetic and soft lab-on-a-chip platform based on enzymatic-crosslinked silk fibroin hydrogel for 3D cell co-culture

Integrating biological material within soft microfluidic systems made of hydrogels offers countless possibilities in biomedical research to overcome the intrinsic limitations of traditional microfluidics based on solid, non-biodegradable, and non-biocompatible materials. Hydrogel-based microfluidic technologies have the potential to transformin vitrocell/tissue culture and modeling. However, most hydrogel-based microfluidic platforms are associated with device deformation, poor structural definition, reduced stability/reproducibility due to swelling, and a limited range in rigidity, which threatens their applicability. Herein, we describe a new methodological approach for developing a soft cell-laden microfluidic device based on enzymatically-crosslinked silk fibroin (SF) hydrogels. Its unique mechano-chemical properties and high structural fidelity, make this platform especially suited forin vitrodisease modelling, as demonstrated by reproducing the native dynamic 3D microenvironment of colorectal cancer and its response to chemotherapeutics in a simplistic way. Results show that from all the tested concentrations, 14 wt% enzymatically-crosslinked SF microfluidic platform has outstanding structural stability and the ability to perfuse fluid while displayingin vivo-like biological responses. Overall, this work shows a novel technique to obtain an enzymatically-crosslinked SF microfluidic platform that can be employed for developing soft lab-on-a-chipin vitromodels.

Mechanobiology of 3D cell confinement and extracellular crowding

AbstractCells and tissues are often under some level of confinement, imposed by the microenvironment and neighboring cells, meaning that there are limitations to cell size, volume changes, and fluid exchanges. 3D cell culture, increasingly used for both single cells and organoids, inherently impose levels of confinement absent in 2D systems. It is thus key to understand how different levels of confinement influences cell survival, cell function, and cell fate. It is well known that the mechanical properties of the microenvironment, such as stiffness and stress relaxation, are important in activating mechanosensitive pathways, and these are responsive to confinement conditions. In this review, we look at how low, intermediate, and high levels of confinement modulate the activation of known mechanobiology pathways, in single cells, organoids, and tumor spheroids, with a specific focus on 3D confinement in microwells, elastic, or viscoelastic scaffolds. In addition, a confining microenvironment can drastically limit cellular communication in both healthy and diseased tissues, due to extracellular crowding. We discuss potential implications of extracellular crowding on molecular transport, extracellular matrix deposition, and fluid transport. Understanding how cells sense and respond to various levels of confinement should inform the design of 3D engineered matrices that recapitulate the physical properties of tissues.

3D Micropatterned Traction Force Microscopy: A Technique to Control 3D Cell Shape While Measuring Cell-Substrate Force Transmission.

Cell shape and function are intimately linked, in a way that is mediated by the forces exerted between cells and their environment. The relationship between cell shape and forces has been extensively studied for cells seeded on flat 2D substrates, but not for cells in more physiological 3D settings. Here, a technique called 3D micropatterned traction force microscopy (3D-µTFM) to confine cells in 3D wells of defined shape, while simultaneously measuring the forces transmitted between cells and their microenvironment is demonstrated. This technique is based on the 3D micropatterning of polyacrylamide wells and on the calculation of 3D traction force from their deformation. With 3D-µTFM, it is shown that MCF10A breast epithelial cells exert defined, reproducible patterns of forces on their microenvironment, which can be both contractile and extensile. Cells switch from a global contractile to extensile behavior as their volume is reduced are further shown. The technique enables the quantitative study of cell mechanobiology with full access to 3D cellular forces while having accurate control over cell morphology and the mechanical conditions of the microenvironment.

3D Neurovascular Unit Tissue Model to Assess Responses to Traumatic Brain Injury.

The neurovascular unit (NVU) is a critical interface in the central nervous system that links vascular interactions with glial and neural tissue. Disruption of the NVU has been linked to the onset and progression of neurodegenerative diseases. Despite its significance the NVU remains challenging to study in a physiologically relevant manner. Here, a 3D cell triculture model of the NVU is developed that incorporates human primary brain microvascular endothelial cells, astrocytes, and pericytes into a tissue system that can be sustained invitro for several weeks. This tissue model helps recapitulate the complexity of the NVU and can be used to interrogate the mechanisms of disease and cell-cell interactions. The NVU tissue model displays elevated cell death and inflammatory responses following mechanical damage, to emulate traumatic brain injury (TBI) under controlled laboratory conditions, including lactate dehydrogenase (LDH) release, elevated inflammatory markers TNF-α and monocyte chemoattractant cytokines MCP-2 and MCP-3 and reduced expression of the tight junction marker ZO-1. This 3D tissue model serves as a tool for deciphering mechanisms of TBIs and immune responses associated with the NVU.

An Automated Digital Microfluidic System Based on Inkjet Printing

Cellular interactions, such as intercellular communication and signal transduction, can be enhanced within three-dimensional cell spheroids, contributing significantly to cellular viability and proliferation. This is crucial for advancements in cancer research, drug testing, and personalized medicine. The dimensions of the cell spheroids play a pivotal role in their functionality, affecting cell proliferation and differentiation, intercellular interactions, gene expression, protein synthesis, drug penetration, and metabolism. Consequently, different spheroid sizes may be required for various drug sensitivity experiments. However, conventional 3D cell spheroid cultures suffer from challenges such as size inconsistency, poor uniformity, and low throughput. To address these issues, we have developed an automated, intelligent system based on inkjet printing. This system allows for precise control of droplet volume by adjusting algorithms, thereby enabling the formation of spheroids of varying sizes. For spheroids of a single size, the printing pattern can be modified to achieve a coefficient of variation within 10% through a bidirectional compensation method. Furthermore, the system is equipped with an automatic pipetting module, which facilitates the high-throughput preparation of cell spheroids. We have implemented a 3 × 3 spheroid array in a 24-well plate, printing a total of 216 spheroids in just 11 min. Last, we attempted to print mouse small intestinal organoids and cultured them for 7 days, followed by immunofluorescent staining experiments. The results indicate that our equipment is capable of supporting the culture of organoids, which is of great significance for high-throughput drug screening and personalized medicine.