Cell Surface Of Pichia Pastoris Research Articles

Supplementation of citrus pectin with whole-cell pectinase PG5 on Pichia pastoris promotes recovery of colitis and enhances intestinal barrier function in DSS-treated mice

A whole-cell biocatalyst was developed by genetically engineering pectinase PG5 onto the cell surface of Pichia pastoris using Gcw12 as the anchoring protein. Whole-cell PG5 eliminated the need for enzyme extraction and purification, while also exhibiting enhanced thermal stability, pH stability, and resistance to proteases in vitro compared to free PG5. Magnetic resonance mass spectrometry analysis revealed that whole-cell PG5 efficiently degraded citrus pectin, resulting in the production of a mixture of pectin oligosaccharides. The primary components of the mixture were trigalacturonic acid, followed by digalacturonic acid and tetragalacturonic acid. Supplementation of citrus pectin with whole-cell PG5 resulted in a more pronounced protective effect compared to free PG5 in alleviating colitis symptoms and promoting the integrity of the colonic epithelial barrier in a mouse model of dextran sulfate sodium-induced colitis. Hence, this study demonstrates the potential of utilizing whole-cell pectinase as an effective biocatalyst to promote intestinal homeostasis in vivo.

A betaine-modified whole-cell biocatalyst with surface display of Thermomyces lanuginosus lipase for biodiesel production from Jatropha curcas oil

Yeast surface displaying lipases are promising biocatalysts for biodiesel synthesis. Thermomyces lanuginosus lipase (TLL) was displayed on Pichia pastoris cell surface by screening proper anchor system, resulting in a whole-cell biocatalyst (termed D-TLL). The lipase activity of D-TLL is the highest activity to date for surface-displayed TLL, reaching 2274.7 U/g dry cell weight (DCW). The obtained biocatalyst was efficient in converting Jatropha curcas oil into biodiesel. The biodiesel yield peaked 92.6% after 12 h adopting only 3.3% (w/w) of D-TLL in the solvent-free system. As compared to free TLL, the whole-cell biocatalyst showed a dramatic reduction of 48 h in reaction time. The further treatment with betaine enabled enhanced thermostability, hydrophobicity and methanol tolerance of biocatalyst (named D-TLL-betaine), and thereby increasing the reusability of the whole-cell biocatalyst. These results exhibited that the new biocatalyst, D-TLL-betaine, has great potential for biodiesel production.

Kinetic resolution of sec-alcohols catalysed by Candida antarctica lipase B displaying Pichia pastoris whole-cell biocatalyst.

Kinetic resolution of sec-alcohols is a green process with biocatalyst. Candida antarctica lipase B (CALB) displayed on Pichia pastoris cell-surface (Pp-CALB) was characterized in kinetic resolution of sec-alcohols with different structures. The reaction parameters including acyl donors, molar ratio of substrates, solvents and temperatures were examined with 2-octanol as model substrate. 47.4% molar conversion of 2-octanol and 99.7% eep were obtained after a 5h reaction with Pp-CALB, and 90% of its original activity still remained after being reused for 10 cycles. Pp-CALB was then used to several sec-alcohols and it showed great enzymatic activity and enantioselectivity to all tested sec-alcohols, more than 93.1% of eep. The enantioselective characteristics of Pp-CALB catalysed sec-alcohols with different structures were compared with Novozyme 435 which was almost the same. Solvent free system as one way of green chemistry was applied to Pp-CALB and Pp-CALB showed great catalytic activity and enantioselectivity. Pp-CALB was potential biocatalyst of high enzymatic activity and enantioselectivity using in resolution of sec-alcohols.

Display of fungal hydrophobin on the Pichia pastoris cell surface and its influence on Candida antarctica lipase B.

To modify the Pichia pastoris cell surface, two classes of hydrophobins, SC3 from Schizophyllum commune and HFBI from Trichoderma reesei, were separately displayed on the cell wall. There was an observable increase in the hydrophobicity of recombinant strains. Candida antarctica lipase B (CALB) was then co-displayed on the modified cells, generating strains GS115/SC3-61/CALB-51 and GS115/HFBI-61/CALB-51. Interestingly, the hydrolytic and synthetic activities of strain GS115/HFBI-61/CALB-51 increased by 37 and 109%, respectively, but decreased by 26 and 43%, respectively, in strain GS115/SC3-61/CALB-51 compared with the hydrophobin-minus recombinant strain GS115/CALB-GCW51. The amount of glycerol by-product from the transesterification reaction adsorbed on the cell surface was significantly decreased following hydrophobin modification, removing the glycerol barrier and allowing substrates to access the active sites of lipases. Electron micrographs indicated that the cell wall structures of both recombinant strains appeared altered, including changes to the inner glucan layer and outer mannan layer. These results suggest that the display of hydrophobins can change the surface structure and hydrophobic properties of P. pastoris and affect the catalytic activities of CALB displayed on the surface of P. pastoris cells.

Citrobacter amalonaticus phytase on the cell surface of Pichia pastoris exhibits high pH stability as a promising potential feed supplement.

Phytase expressed and anchored on the cell surface of Pichia pastoris avoids the expensive and time-consuming steps of protein purification and separation. Furthermore, yeast cells with anchored phytase can be used as a whole-cell biocatalyst. In this study, the phytase gene of Citrobacter amalonaticus was fused with the Pichia pastoris glycosylphosphatidylinositol (GPI)-anchored glycoprotein homologue GCW61. Phytase exposed on the cell surface exhibits a high activity of 6413.5 U/g, with an optimal temperature of 60°C. In contrast to secreted phytase, which has an optimal pH of 5.0, phytase presented on the cell surface is characterized by an optimal pH of 3.0. Moreover, our data demonstrate that phytase anchored on the cell surface exhibits higher pH stability than its secreted counterpart. Interestingly, our in vitro digestion experiments demonstrate that phytase attached to the cell surface is a more efficient enzyme than secreted phytase.

High-yield phosphatidylserine production via yeast surface display of phospholipase D from Streptomyces chromofuscus on Pichia pastoris.

The gene encoding phospholipase D (PLD) from Streptomyces chromofuscus was displayed on the cell surface of Pichia pastoris GS115/pKFS-pldh using a Flo1p anchor attachment signal sequence (FS anchor). The displayed PLD (dPLD) showed maximum enzymatic activity at pH 6.0 and 55 °C and was stable within a broad range of temperatures (20-65 °C) and pHs (pH 4.0-11.0). In addition, the thermostability, acid stability and organic solvent tolerance of the dPLD were significantly enhanced compared with the secreted PLD (sPLD) from S. chromofuscus. Use of dPLD for conversion of phosphatidylcholine (PC) and l-serine to phosphatidylserine (PS) showed that 67.5% of PC was converted into PS at the optimum conditions. Moreover, the conversion rate of PS remained above 50% after 7 repeated batch cycles. Thus, P. pastoris GS115/pKFS-pldh shows the potential for viable industrial production of PS.

Quantitative evaluation of Candia antarctica lipase B displayed on the cell surface of a Pichia pastoris based on an FS anchor system

A new approach is described to quantify the number of enzyme molecules, such as Candia antarctica lipase B, that are displayed on the cell surface of Pichia pastoris. Enhanced green fluorescent protein (EGFP) and Candida antarctica lipase B (CALB) were fused and displayed on the surface of P. pastoris by linking to the anchor flocculation functional domain of FLO1p from Saccharomyces cerevisiae. Confocal laser scanning microscopy, flow cytometry, and fluorescence spectrophotometry were used to monitor the fluorescence intensity of fused EGFP. Combined with the corresponding protein concentration detected in the medium, a standard curve describing the relationship between the fusion protein concentration and fluorescence intensity were obtained and could be used to number CALB displayed on the cell surface. The results showed that approx. 10(4) molecules of CALB molecules were immobilized on the single P. pastoris cell wall based on FS anchor system.

Double Candida antarctica lipase B co-display on Pichia pastoris cell surface based on a self-processing foot-and-mouth disease virus 2A peptide

To develop a high efficiency Candida antarctica lipase B (CALB) yeast display system, we linked two CALB genes fused with Sacchromyces cerevisiae cell wall protein genes, the Sed1 and the 3'-terminal half of Sag1, separately by a 2A peptide of foot-and-mouth disease virus (FMDV) in a single open reading frame. The CALB copy number of recombinant strain KCSe2ACSa that harbored the ORF was identified, and the quantity of CALB displayed on the cell surface and the enzyme activity of the strain were measured. The results showed that the fusion of multiple genes linked by 2A peptide was translated into two independent proteins displayed on the cell surface of stain KCSe2ACSa. Judging from the data of immunolabeling assay, stain KCSe2ACSa displayed 94% CALB-Sed1p compared with stain KCSe1 that harbored a single copy CALB-Sed1 and 64% CALB-Sag1p compared with stain KCSa that harbored a single copy CALB-Sag1 on its surface. Besides, strain KCSe2ACSa possessed 170% hydrolytic activity and 155% synthetic activity compared with strain KCSe1 as well as 144% hydrolytic activity and 121% synthetic activity compared with strain KCSa. Strain KCSe2ACSa even owned 124% hydrolytic activity compared with strain KCSe2 that harbored two copies CALB-Sed1. The heterogeneous glycosylphosphatidylinositol-anchored proteins co-displaying yeast system mediated by FMDV 2A peptide was shown to be an effective method for improving the efficiency of enzyme-displaying yeast biocatalysts.

Cell-surface phytase onPichia pastoriscell wall offers great potential as a feed supplement

Cell-surface expression of phytase allows the enzyme to be expressed and anchored on the cell surface of Pichia pastoris. This avoids tedious downstream processes such as purification and separation involved with extracellular expression. In addition, yeast cells with anchored proteins can be used as a whole-cell biocatalyst with high value added. In this work, the phytase was expressed on the cell surface of P. pastoris with a glycosylphosphatidylinositol anchoring system. The recombinant phytase was shown to be located at the cell surface. The cell-surface phytase exhibited high activity with an optimal temperature at 50-55 degrees C and two optimal pH peaks of 3 and 5.5. The surface-displayed phytase also exhibited similar pH stability and pepsin resistance to the native and secreted phytase. In vitro digestibility test showed that P. pastoris containing cell-surface phytase released phosphorus from feedstuff at a level similar to secreted phytase. Yeast cells expressing phytase also provide additional nutrients, especially biotin and niacin. Thus, P. pastoris with phytase displayed on its surface has a great potential as a whole-cell supplement to animal feed.

Efficient display of active lipase LipB52 with a Pichia pastoris cell surface display system and comparison with the LipB52 displayed on Saccharomyces cerevisiae cell surface

BackgroundFor industrial bioconversion processes, the utilization of surface-displayed lipase in the form of whole-cell biocatalysts is more advantageous, because the enzymes are displayed on the cell surface spontaneously, regarded as immobilized enzymes.ResultsTwo Pichia pastoris cell surface display vectors based on the flocculation functional domain of FLO with its own secretion signal sequence or the α-factor secretion signal sequence were constructed respectively. The lipase gene lipB52 fused with the FLO gene was successfully transformed into Pichia pastoris KM71. The lipase LipB52 was expressed under the control of the AOX1 promoter and displayed on Pichia pastoris KM71 cell surface with the two Pichia pastoris cell surface display vectors. Localization of the displayed LipB52 on the cell surface was confirmed by the confocal laser scanning microscopy (CLSM). The LipB52 displayed on the Pichia pastoris cell surface exhibited activity toward p-nitrophenol ester with carbon chain length ranging from C10 to C18, and the optimum substrate was p-nitrophenol-caprate (C10), which was consistent with it displayed on the Saccharomyces cerevisiae EBY100 cell surface. The hydrolysis activity of lipase LipB52 displayed on Pichia pastoris KM71-pLHJ047 and KM71-pLHJ048 cell surface reached 94 and 91 U/g dry cell, respectively. The optimum temperature of the displayed lipases was 40°C at pH8.0, they retained over 90% activity after incubation at 60°C for 2 hours at pH 7.0, and still retained 85% activity after incubation for 3 hours.ConclusionThe LipB52 displayed on the Pichia pastoris cell surface exhibited better stability than the lipase LipB52 displayed on Saccharomyces cerevisiae cell surface. The displayed lipases exhibited similar transesterification activity. But the Pichia pastoris dry cell weight per liter (DCW/L) ferment culture was about 5 times than Saccharomyces cerevisiae, the lipase displayed on Pichia pastoris are more suitable for whole-cell biocatalysts than that displayed on Saccharomyces cerevisiae cell surface.

Construction of a novel system for cell surface display of heterologous proteins on Pichia pastoris

A versatile vector was developed for heterologous proteins display on the cell surface of Pichia pastoris using the C-terminal half of alpha-agglutinin from Saccharomyces cerevisiae as a membrane anchor under the control of the alcohol oxidase 1 promoter (pAOX1). Multiple cloning sites and the sequence encoding the Xpress epitope (-Asp-Leu-Tyr-Asp-Asp-Asp-Asp-Lys-) were introduced into the vector for insertion of heterologous genes and selective cleavage of target proteins. Enhanced green fluorescence protein (EGFP) was used as a model protein to check the function of this vector. The expression of EGFP on the P. pastoris surface was confirmed by confocal laser scanning microscopy. Fluorescence microscopy and western blot analysis confirmed that EGFP can be successfully cleaved from the cell surface by treating with enterokinase.

Display of adenoregulin with a novel Pichia pastoris cell surface display system

Two Pichia pastoris cell surface display vectors were constructed. The vectors consisted of the flocculation functional domain of Flo1p with its own secretion signal sequence or the alpha-factor secretion signal sequence, a polyhistidine (6xHis) tag for detection, an enterokinase recognition site, and the insertion sites for target proteins. Adenoregulin (ADR) is a 33-amino-acid antimicrobial peptide isolated from Phyllomedusa bicolor skin. The ADR was expressed and displayed on the Pichia pastoris KM71 cell surface with the system reported. The displayed recombinant ADR fusion protein was detected by fluorescence microscopy and confocal laser scanning microscopy (CLSM). The antimicrobial activity of the recombinant adenoregulin was detected after proteolytic cleavage of the fusion protein on cell surface. The validity of the Pichia pastoris cell surface display vectors was proved by the displayed ADR.