Cell Size Research Articles

Numerical simulation on cellular structure and mechanical properties of tungsten particles/polymethyl methacrylate microcellular composites

AbstractMicrocellular composites combine the advantages of composite material and microcellular material. Introducing the inclusion phase into the polymer matrix can optimize the cellular structure and improve the mechanical properties of microcellular materials. This paper focuses on rigid W particles reinforced PMMA microcellular materials, combining compression experiments and meso FE simulations to investigate the structure–property relationship of cellular structure and compressive properties for W/PMMA microcellular composites. The results indicate that W particles promote heterogeneous nucleation, reducing the cell size to 3 μm, and reinforce the PMMA matrix. W particles (10 → 60 wt%) are linearly and exponentially related to compressive modulus and compressive strength of W/PMMA microcellular composites, increased by 49.3% and 19.8%. Void porosity (71% → 48%) is quadratic related to compressive properties of W/PMMA microcellular composites, increased by 109%. Cell sizes (5 → 1 μm, especially smaller than the W particle sizes) are exponentially related to compressive properties of W/PMMA microcellular composites, increased by 38.5%. This work provides theoretical support for the regulation of cellular structure and optimization of mechanical properties of microcellular materials.

Cell growth and nutrient availability control the mitotic exit signaling network in budding yeast.

Cell growth is required for cell cycle progression. The amount of growth required for cell cycle progression is reduced in poor nutrients, which leads to a reduction in cell size. In budding yeast, nutrients can influence cell size by modulating the extent of bud growth, which occurs predominantly in mitosis. However, the mechanisms are unknown. Here, we used mass spectrometry to identify proteins that modulate bud growth in response to nutrient availability. This led to the discovery that nutrients regulate numerous components of the mitotic exit network (MEN), which controls exit from mitosis. A key component of the MEN undergoes gradual multisite phosphorylation during bud growth that is dependent upon bud growth and correlated with the extent of growth. Furthermore, activation of the MEN is sufficient to override a growth requirement for mitotic exit. The data suggest a model in which the MEN ensures that mitotic exit occurs only when an appropriate amount of bud growth has occurred.

Biaxial porosity gradient and cell size adjustment improve energy absorption in rigid and flexible 3D-printed reentrant honeycomb auxetic structures

This paper compares different uniaxial and biaxial graded designs of auxetic reentrant honeycomb structures to enhance their mechanical properties, especially the specific energy absorption under compressive load. The lattice structures were 3D printed using the vat photopolymerization masked-stereolithography technique from two different materials – tough (OR) and flexible (FR). The results were evaluated from a material and structural point of view, investigating the effect of porosity, cell number, size, graded design, and fracture mode. The universally best energy-absorbing performance was found in a biaxially graded structure with a center-wise location of the highest local porosity. Depending on the used resin, its energy absorption capacity was up to 2–3 times enhanced compared to a reference uniform-porosity auxetic design. The presented data constitutes a fundamental understanding of auxetic structures and identifies practical approaches for tuning the auxetic structures’ performance regarding their mechanical response. Finally, this study demonstrates the potential of shape versatility offered by 3D printing and other additive manufacturing techniques.

Modeling from the first principles of the electronic properties of compositions of REE as precursors of high-temperature superconductors

Modeling of the first principles of the electronic properties of complex oxides of rare earth elements (BaY2O4, BaGd2O4, BaLu2O4) as precursors of high-temperature superconductors has been performed. The VASP software package was used as a modeling environment, in particular the method of coupled plane waves (PAW method), which allows us to obtain fairly accurate results for calculating the electron density and band structure. From the analysis of the obtained band energy structure, it follows that the studied REE oxides have a band gap width Eg = 3.29–3.84 eV, which is characteristic for dielectric materials. The studied compounds based on these rare earth elements selected from the yttrium (Y, La, Gd–Lu) and cerium (Ce–Eu) groups are characterized by an increase in Fermi energy and a decrease in the band gap as the atomic number (39, 64, 71) of the element in the periodic table increases. A method for modeling the quantum layers of the studied materials by simulating the restriction of the crystal structure along one of the coordinate axes is proposed. This representation approximates the model of the crystal lattice of REE oxides to the situation of analyzing a quantum layer whose thickness is equal to the size of the crystal cell along the specified axis. The rupture of atomic bonds in a crystal is simulated by increasing the distance between atomic layers along this axis to values at which the value of free energy is stabilized. In the quantum layer of rare earth element oxide (with its thickness close to 1 nm), a wider range of energy values is formed in which electrons are distributed than is observed in the continuous version, and the expansion of the electron distribution area extends to the energy levels of the band gap. This is explained by the fact that the geometric discretization of nanoscale structures determines the discreteness of the quantum-dimensional energy spectrum.

Alterations in the Anatomy and Ultrastructure of Leaf Blade in Norway Maple (Acer platanoides L.) Growing on Mining Sludge: Prospects of Using This Tree Species for Phytoremediation.

Alterations in leaf architecture can be used as an indicator of the substrate toxicity level as well as the potential of a given plant species in the phytoremediation of polluted areas, e.g., mining sludge. In this work, we demonstrated, for the first time, the nature and scale of alterations in leaf architecture at the tissue and cellular levels occurring in Norway maple growing on mining sludge originating from a copper mine in Lubin (Poland). The substrate differs from other mine wastes, e.g., calamine or serpentine soils, due to an extremely high level of arsenic (As). Alterations in leaf anatomy predominantly included the following: (1) a significant increase in upper epidermis thickness; (2) a significant decrease in palisade parenchyma width; (3) more compact leaf tissue organization; (4) the occurrence of two to three cell layers in palisade parenchyma in contrast to one in the control; (5) a significantly smaller size of cells building palisade parenchyma. At the cellular level, the alterations included mainly the occurrence of local cell wall thickenings-predominantly in the upper and lower epidermis-and the symptoms of accelerated leaf senescence. Nevertheless, many chloroplasts showed almost intact chloroplast ultrastructure. Modifications in leaf anatomy could be a symptom of alterations in morphogenesis but may also be related to plant adaptation to water deficit stress. The occurrence of local cell wall thickenings can be considered as a symptom of a defence strategy involved in the enlargement of apoplast volume for toxic elements (TE) sequestration and the alleviation of oxidative stress. Importantly, the ultrastructure of leaf cells was not markedly disturbed. The results suggested that Norway maple may have good phytoremediation potential. However, the general shape of the plant, the significantly smaller size of leaves, and accelerated senescence indicated the high toxicity of the mining sludge used in this experiment. Hence, the phytoremediation of such a substrate, specifically including use of Norway maple, should be preceded by some amendments-which are highly recommended.

The FAcilitates Chromatin Transcription complex regulates the ratio of glycolysis to oxidative phosphorylation in neural stem cells.

Defects in the FAcilitates Chromatin Transcription (FACT) complex, a histone chaperone composed of SSRP1 and SUPT16H, are implicated in intellectual disability. Here, we reveal that the FACT complex promotes glycolysis and sustains the correct cell fate of neural stem cells/neuroblasts in the Drosophila 3rd instar larval central brain. We show that the FACT complex binds to the promoter region of the estrogen-related receptor (ERR) gene and positively regulates ERR expression. ERR is known to act as an aerobic glycolytic switch by upregulating the enzymes required for glycolysis. Dysfunction of the FACT complex leads to the downregulation of ERR transcription, resulting in a decreased ratio of glycolysis to oxidative phosphorylation (G/O) in neuroblasts. Consequently, neuroblasts exhibit smaller cell sizes, lower proliferation potential, and altered cell fates. Overexpression of ERR or suppression of mitochondrial oxidative phosphorylation in neuroblasts increases the relative G/O ratio and rescues defective phenotypes caused by dysfunction of the FACT complex. Thus, the G/O ratio, mediated by the FACT complex, plays a crucial role in neuroblast cell fate maintenance. Our study may shed light on the mechanism by which mutations in the FACT complex lead to intellectual disability in humans.

Effects of cell parameters on accurate calculation of activation dose after DT explosion for local hot spots in laser-driven ICF facilities

Instruments placed in the target chamber will be highly activated after DT explosion in laser-driven ICF experiments, especially for the part near the chamber center. Operations near those local hot spots are the main concern for radiation protection due to its high contribution to the occupation exposure dose, therefore it becomes very important to calculate the dose during the operating process accurately. Cell-based rigorous two-step (R2S) method has been introduced to deal with the activated objects with highly heterogeneous distribution, and the effects of cell size, materials as well as radiation source have also been specified to improve the accuracy of simulations. Results for a typical model sample show that with a given distribution of radiation source, cell size in the simulations placed a significant influence on the accuracy of the radiation field. A cell size of 50 cm for a 100 cm cone-shaped sample will lead to the inaccuracy of the radiation field as large as an order in magnitude within the location 50 cm from the surface of the sample. While for the same sample model, cell size should be limited to smaller than 2 cm to ensure an accuracy lower than ±10 %. In addition, the effects of the material and source energy on the calculation accuracy for the radiation field could be neglected if the cell size is limited to smaller than 5 cm. Furthermore, the influence of cell size increased as the distance from the sample surface decreased, which indicates that appropriate cell size must be chosen to ensure the accuracy of dose estimation, especially for surface contact operations. Besides, a significant difference between the effective dose and skin-equivalent dose has been observed for the typical mode used in the calculations.

Triiodo-L-thyronine (T3) downregulates Npr1 gene (coding for natriuretic peptide receptor-A) transcription in H9c2 cells: involvement of β-AR-ROS signaling.

Natriuretic peptide receptor-A (NPR-A) signaling system is considered as an intrinsic productive mechanism of the heart that opposes abnormal cardiac remodeling and hypertrophic growth. NPR-A is coded by Npr1 gene, and its expression is downregulated in the hypertrophied heart. We sought to examine the levels of Npr1 gene transcription in triiodo-L-thyronine (T3) treated hypertrophied cardiomyocyte (H9c2) cells, in vitro, and also the involvement of β-adrenergic receptor (β-AR) - Reactive oxygen species (ROS) signaling system in the down-regulation of Npr1 transcription also studied. Anti-hypertrophic Npr1 gene transcription was monitored in control and T3-treated (dose and time dependent) H9c2 cells, using a real time PCR method. Further, cell size, intracellular cGMP, ROS, hypertrophy markers (ANP, BNP, α-sk, α-MHC and β-MHC), β-AR, and protein kinase cGMP-dependent 1 (PKG-I) genes expression were also determined. The intracellular cGMP and ROS levels were determined by ELISA and DCF dye method, respectively. In addition, to neutralize T3 mediated ROS generation, H9c2 cells were treated with T3 in the presence and absence of antioxidants [curcumin (CU) or N-acetyl-L-cysteine (NAC)]. A dose dependent (10 pM, 100 pM, 1 nM and 10 nM) and time dependent (12 h, 24 h and 48 h) down-regulation of Npr1 gene transcription (20, 39, 60, and 74% respectively; 18, 55, and 85%, respectively) were observed in T3-treated H9c2 cells as compared with control cells. Immunofluorescence analysis also revealed that a marked down regulation of NPR- A protein in T3-treated cells as compared with control cells. Further, a parallel downregulation of cGMP and PKG-I (2.4 fold) were noticed in the T3-treated cells. In contrast, a time dependent increased expression of β-AR (60, 72, and 80% respectively) and ROS (26, 48, and 74%, respectively) levels were noticed in T3-treated H9c2 cells as compared with control cells. Interestingly, antioxidants, CU or NAC co-treated T3 cells displayed a significant reduction in ROS (69 and 81%, respectively) generation and to increased Npr1 gene transcription (81 and 88%, respectively) as compared with T3 alone treated cells. Our result suggest that down regulation of Npr1 gene transcription is critically involved in T3- induced hypertrophic growth in H9c2 cells, and identifies the cross-talk between T3-β-AR-ROS and NPR-A signaling.

RNA-Seq Reveals That Multiple Pathways Are Involved in Tuber Expansion in Tiger Nuts (Cyperus esculentus L.).

The tiger nut (Cyperus esculentus L.) is a usable tuber and edible oil plant. The size of the tubers is a key trait that determines the yield and the mechanical harvesting of tiger nut tubers. However, little is known about the anatomical and molecular mechanisms of tuber expansion in tiger nut plants. This study conducted anatomical and comprehensive transcriptomics analyses of tiger nut tubers at the following days after sowing: 40 d (S1); 50 d (S2); 60 d (S3); 70 d (S4); 90 d (S5); and 110 d (S6). The results showed that, at the initiation stage of a tiger nut tuber (S1), the primary thickening meristem (PTM) surrounded the periphery of the stele and was initially responsible for the proliferation of parenchyma cells of the cortex (before S1) and then the stele (S2-S3). The increase in cell size of the parenchyma cells occurred mainly from S1 to S3 in the cortex and from S3 to S4 in the stele. A total of 12,472 differentially expressed genes (DEGs) were expressed to a greater extent in the S1-S3 phase than in S4-S6 phase. DEGs related to tuber expansion were involved in cell wall modification, vesicle transport, cell membrane components, cell division, the regulation of plant hormone levels, signal transduction, and metabolism. DEGs involved in the biosynthesis and the signaling of indole-3-acetic acid (IAA) and jasmonic acid (JA) were expressed highly in S1-S3. The endogenous changes in IAA and JAs during tuber development showed that the highest concentrations were found at S1 and S1-S3, respectively. In addition, several DEGs were related to brassinosteroid (BR) signaling and the G-protein, MAPK, and ubiquitin-proteasome pathways, suggesting that these signaling pathways have roles in the tuber expansion of tiger nut. Finally, we come to the conclusion that the cortex development preceding stele development in tiger nut tubers. The auxin signaling pathway promotes the division of cortical cells, while the jasmonic acid pathway, brassinosteroid signaling, G-protein pathway, MAPK pathway, and ubiquitin protein pathway regulate cell division and the expansion of the tuber cortex and stele. This finding will facilitate searches for genes that influence tuber expansion and the regulatory networks in developing tubers.

Estimation of red blood cell aggregation size using power spectrum considering density of red blood cells in focal region

Abstract We have studied a noninvasive and quantitative method for measuring the aggregate size of red blood cells (RBCs). In our previous study, the scattering power spectrum obtained from the vascular lumen was fitted to the reference scattering spectra calculated from the scattering spectrum of a single-sphere scatterer. In this paper, we propose a method for calculating the reference scattering spectra by summing the scattering spectra for numerous scatterers in the ultrasound focal region. By applying this method to the size estimation of microparticles simulating RBC aggregates, the estimated sizes are found to be close to the true values. In in vivo measurements, the estimated sizes at rest are equivalent to the size of a single sphere with the same volume as an RBC, and those during avascularization are larger than those at rest, which is reasonable. The proposed method has the potential to accurately estimate the size of RBC aggregates.

Advantages of pulsed electric field ablation for COPD: Excellent killing effect on goblet cells

Mucus hypersecretion resulting from excessive proliferation and metaplasia of goblet cells in the airways is the pathological foundation for Chronic obstructive pulmonary disease (COPD). Clinical trials have confirmed the clinical efficacy of pulsed electric field ablation (PFA) for COPD, but its underlying mechanisms is poorly understood. Cellular and animal models of COPD (rich in goblet cells) were established in this study to detect goblet cells’ sensitivity to PFA. Schwan’s equation was adopted to calculate the cells’ transmembrane potential and the electroporation areas in the cell membrane. We found that goblet cells are more sensitive to low-intensity PFA (250 V/cm-500 V/cm) than BEAS-2B cells. It is attributed to the larger size of goblet cells, which allows a stronger transmembrane potential formation under the same electric field strength. Additionally, the transmembrane potential of larger-sized cells can reach the cell membrane electroporation threshold in more areas. Trypan blue staining confirmed that the cells underwent IRE rate was higher in goblet cells than in BEAS-2B cells. Animal experiments also confirmed that the airway epithelium of COPD is more sensitive to PFA. We conclude that lower-intensity PFA can selectively kill goblet cells in the COPD airway epithelium, ultimately achieving the therapeutic effect of treating COPD.

Translational control of MPS1 links protein synthesis with the initiation of cell division and spindle pole body duplication in Saccharomyces cerevisiae.

Protein synthesis underpins cell growth and controls when cells commit to a new round of cell division at a point in late G1 of the cell cycle called Start. Passage through Start also coincides with the duplication of the microtubule-organizing centers, the yeast spindle pole bodies, which will form the two poles of the mitotic spindle that segregates the chromosomes in mitosis. The conserved Mps1p kinase governs the duplication of the spindle pole body in Saccharomyces cerevisiae. Here, we show that the MPS1 transcript has a short upstream open reading frame that represses the synthesis of Mps1p. Mutating the MPS1 uORF makes the cells smaller, accelerates the appearance of Mps1p in late G1, and promotes completion of Start. Monitoring the spindle pole body in the cell cycle using structured illumination microscopy revealed that mutating the MPS1 uORF enabled cells to duplicate their spindle pole body earlier at a smaller cell size. The accelerated Start of MPS1 uORF mutants depends on the G1 cyclin Cln3p and the transcriptional repressor Whi5p but not on the Cln1,2p G1 cyclins. These results identify growth inputs in mechanisms that control duplication of the microtubule-organizing center and implicate these processes in the coupling of cell growth with division.

Energy absorption in expanding metallic wire mesh tubes

The deformation process and energy absorption of metal wire mesh tubes under quasi-static expanding by a hemispherical-cylindrical indenter were investigated by experimental tests, finite element (FE) simulations and analytical modelling. Stainless steel and aluminum alloy tubes were tested on an MTS universal testing machine at a speed of 10 mm/min. The effects of mesh cell size and friction coefficient on the quasi-static force and specific energy absorption (SEA) were examined by FE analysis and analytical modelling. The analysis reveals that a combination of the mesh cell size and cross section dimension of the wire governs the energy absorption of tubes of equal overall dimension (diameter and length) and masses. In general, a decrease of the size of cells with constant height-to-width ratios leads to an increase of the specific energy absorption mainly due to the increased number of cells within the deformed region. An increase of the specific energy absorption is also achieved when the cell size is reduced by only decreasing the cell height. The maximum indenter force predicted by the proposed analytical model of the expanded tube deformation agrees well with the experimental results and FE simulations.

Inhibition of Hmbox1 Promotes Cardiomyocyte Survival and Glucose Metabolism Through Gck Activation in Ischemia/Reperfusion Injury.

Exercise-induced physiological cardiac growth regulators may protect the heart from ischemia/reperfusion (I/R) injury. Homeobox-containing 1 (Hmbox1), a homeobox family member, has been identified as a putative transcriptional repressor and is downregulated in the exercised heart. However, its roles in exercise-induced physiological cardiac growth and its potential protective effects against cardiac I/R injury remain largely unexplored. We studied the function of Hmbox1 in exercise-induced physiological cardiac growth in mice after 4 weeks of swimming exercise. Hmbox1 expression was then evaluated in human heart samples from deceased patients with myocardial infarction and in the animal cardiac I/R injury model. Its role in cardiac I/R injury was examined in mice with adeno-associated virus 9 (AAV9) vector-mediated Hmbox1 knockdown and in those with cardiac myocyte-specific Hmbox1 ablation. We performed RNA sequencing, promoter prediction, and binding assays and identified glucokinase (Gck) as a downstream effector of Hmbox1. The effects of Hmbox1 together with Gck were examined in cardiomyocytes to evaluate their cell size, proliferation, apoptosis, mitochondrial respiration, and glycolysis. The function of upstream regulator of Hmbox1, ETS1, was investigated through ETS1 overexpression in cardiac I/R mice in vivo. We demonstrated that Hmbox1 downregulation was required for exercise-induced physiological cardiac growth. Inhibition of Hmbox1 increased cardiomyocyte size in isolated neonatal rat cardiomyocytes and human embryonic stem cell-derived cardiomyocytes but did not affect cardiomyocyte proliferation. Under pathological conditions, Hmbox1 was upregulated in both human and animal postinfarct cardiac tissues. Furthermore, both cardiac myocyte-specific Hmbox1 knockout and AAV9-mediated Hmbox1 knockdown protected against cardiac I/R injury and heart failure. Therapeutic effects were observed when sh-Hmbox1 AAV9 was administered after I/R injury. Inhibition of Hmbox1 activated the Akt/mTOR/P70S6K pathway and transcriptionally upregulated Gck, leading to reduced apoptosis and improved mitochondrial respiration and glycolysis in cardiomyocytes. ETS1 functioned as an upstream negative regulator of Hmbox1 transcription, and its overexpression was protective against cardiac I/R injury. Our studies unravel a new role for the transcriptional repressor Hmbox1 in exercise-induced physiological cardiac growth. They also highlight the therapeutic potential of targeting Hmbox1 to improve myocardial survival and glucose metabolism after I/R injury.

Revealing roles of S-layer protein (SlpA) in Clostridioides difficile pathogenicity by generating the first slpA gene deletion mutant.

Clostridioides difficile infection (CDI) with high morbidity and high mortality is an urgent threat to public health, and C. difficile pathogenesis studies are eagerly required for CDI therapy. The major surface layer protein, SlpA, was supposed to play a key role in C. difficile pathogenesis; however, a lack of isogenic slpA mutants has greatly hampered analysis of SlpA functions. In this study, the whole slpA gene was successfully deleted for the first time via CRISPR-Cas9 system. Deletion of slpA in C. difficile resulted in smaller, smother-edged colonies, shorter bacterial cell size, and aggregation in suspension. For life cycle, the mutant demonstrated lower growth (changes of optical density at 600 nm, OD600) but higher cell density (colony-forming unit, CFU), decreased toxins production, and inhibited sporulation. Moreover, the mutant was more impaired in motility, more sensitive to vancomycin and Triton X-100-induced autolysis, releasing more lactate dehydrogenase. In addition, SlpA deficiency led to robust biofilm formation but weak adhesion to human host cells.IMPORTANCEClostridioides difficile infection (CDI) has been the most common hospital-acquired infection, with a high rate of antibiotic resistance and recurrence incidences, become a debilitating public health threat. It is urgently needed to study C. difficile pathogenesis for developing efficient strategies as CDI therapy. SlpA was indicated to play a key role in C. difficile pathogenesis. However, analysis of SlpA functions was hampered due to lack of isogenic slpA mutants. Surprisingly, the first slpA deletion C. difficile strain was generated in this study via CRISPR-Cas9, further negating the previous thought about slpA being essential. Results in this study will provide direct proof for roles of SlpA in C. difficile pathogenesis, which will facilitate future investigations for new targets as vaccines, new therapeutic agents, and intervention strategies in combating CDI.

Microalgae cultivation trials in a membrane bioreactor operated in heterotrophic, mixotrophic, and phototrophic modes using ammonium-rich wastewater: The study of fouling

ABSTRACT In this work, microalgae cultivation trials were carried out in a membrane bioreactor to investigate fouling when the cultures of Chlorellavulgaris were grown under mixotrophic, heterotrophic, and phototrophic cultivation regimes. The Chlorella cultures were cultivated in wastewater as a source of nutrients that contained a high concentration of ammonium. In mixotrophic cultivation trials, the results showed that the elevated contents of carbohydrates in the soluble microbial product and proteins in extracellular polymeric substances probably initiated membrane fouling. In this case, the highest protein content was also found in extracellular polymeric substances due to the high nitrogen removal rate. Consequently, transmembrane pressure significantly increased compared to the phototrophic and heterotrophic regimes. The data indicated that cake resistance was the main cause of fouling in all cultivations. Higher protein content in the cake layer made the membrane surface more hydrophobic, while carbohydrates had the opposite effect. Compared to a mixotrophic culture, a phototrophic culture had a larger cell size and higher hydrophobicity, leading to less membrane fouling. Based on our previous data, the highest ammonia removal rate was reached in the mixotrophic cultures; nevertheless, membrane fouling appeared to be the fundamental problem.

Lamiales epidermal dynamics: Unveiling antimicrobial resilience in a structural symphony.

This research on Lamiales epidermal anatomy not only provides in-depth understanding of their structural traits but also highlights the significance of uncovering the inherent antimicrobial resilience embedded within these plants. Such insights hold promise for advancing natural product-based approaches in medicine, potentially contributing to the development of novel antimicrobial agents inspired by Lamiales unique biological defense mechanisms. Scanning microscopic tools were utilized to conduct foliar epidermal anatomy of nine species that belong to seven genera and four families within the Lamiales order, Plantaginaceae, Scrophulariaceae, Verbenaceae, and Lamiaceae. This approach aimed to gather both qualitative and quantitative data, facilitating the assessment of taxonomic microanatomical significance. The shape of epidermal cells and their anticlinal walls; number of epidermal cells, stomata, and trichomes; type of stomata and trichomes; length and width of epidermal cells, trichomes, stomatal pore, guard cells, and subsidiary cells; and stomatal index were determined statistically. Most of the species examined were amphistomatous and showed extensive array of trichomes diversity. The exploration of Lamiales epidermal micromorphology and their antimicrobial potential were significant for their implications in multidisciplinary fields. The pharmacological research to utilize sustainable agricultural practices prompts avenues to strengths of Lamiales order for the development of novel antimicrobial solutions and ecological benefits. RESEARCH HIGHLIGHTS: Diverse trichome morphometry reveals a wide array of trichome structures across Lamiales species. Epidermal microscopic architecture variability of epidermal cell shapes and sizes signifies the interspecies variability. Secondary metabolite localization within microanatomical structures elucidates potential hotspots for antimicrobial compound production.

Utilizing poly(4‐hydroxybutyrate) as a reinforcing additive to produce high‐performance and biodegradable PBAT blends tailored for foaming applications

AbstractPoly(butylene‐adipate‐co‐terephthalate) (PBAT) is recognized for its advantages as a biodegradable thermoplastic polyester. However, its application is often limited due to low strength and poor processability. In contrast, poly(4‐hydroxybutyrate) (P4HB) emerges as a fully biodegradable polyester characterized by high strength, excellent toughness, and facile processing. In this study, P4HB was employed to reinforce PBAT, and glycidyl methacrylate grafted onto poly(4‐hydroxybutyrate) (P4HB‐g‐GMA) was introduced as an effective compatibilizer to address their inherent incompatibility. The study explored the influence of P4HB‐g‐GMA content on the mechanical, thermal, morphological, and rheological properties of the blends. The findings revealed that P4HB‐g‐GMA significantly enhanced the compatibility, mechanical properties, and melt strength of PBAT/P4HB blends. Furthermore, various PBAT/P4HB foams were prepared through a batch foaming process, employing supercritical CO2 as a physical foaming agent. The volume expansion ratio and cell size of PBAT/P4HB foams increased with higher levels of the compatibilizer.

Melting mode driven tuning of local microstructure and hardness in laser powder bed fusion of 18Ni-300 maraging steel

Laser powder bed fusion (LPBF) of 18Ni-300 maraging steel has attracted abundant popularity in both academia and industry due to its superior mechanical properties and printability. Several studies showcased the optimization of process parameters based on relative density, but there is little exploration on tailoring the as-built microstructure. In this study, fully dense maraging steel samples are fabricated with three different melting modes, and they are examined for the cellular solidification microstructure, retained austenite, and the effect of cyclic reheating, the three characteristics that are unique to additively manufactured maraging steel. Microstructural discrepancies among the samples are traced back to the different cooling rate and residual heat, both of which are ultimately determined by the energy input. The findings suggest that a reasonably low energy input yields a microstructure containing fine cell size and little retained austenite, leading to higher hardness. Nanoindentation mapping reveals that the main bodies of all samples are strengthened around 13 %, likely because of the formation of precipitation zone due to four to five layers of subsequent cyclic reheating. This study demonstrates the important opportunity for microstructural tailoring, and consequently, engineering the mechanical properties of maraging steel via LPBF by controlling the solidification and subsequent cyclic reheating, which are both attributed to the printing parameters deployed.

Effects of carboxymethyl cellulose concentration on mechanical, viscoelastic properties, and thermal properties of starch/plant fiber foaming tableware materials with foam structure

In this study, a novel bio-based composite of starch/plant fiber foaming tableware material was prepared by the hot-pressing foaming method. The influence of the content of carboxymethyl cellulos (CMC) as a new type of film-forming agent filler on the properties of foam materials was systematically investigated. The results showed that the foam material with 10 wt% CMC had excellent cell morphology and uniform cell size (the average cell size reached the minimum value of 465.7 μm), relatively high porosity (57.01%), and excellent thermal insulation properties (thermal conductivity: 0.0541 W/m·K). The tensile strength of foam increased from 4.289 MPa for 0 wt% CMC to 5.714 MPa for 10 wt% CMC loading. Similarly, the flexural strength also increased from 11.609 MPa to 15.719 MPa for the foam material with 10 wt% CMC. The thermal stability and viscoelastic properties of the foam material reached the highest after adding 10 wt% CMC. In addition, the increase of CMC content is beneficial to improve the oil resistance and biodegradability of the material. The research shows that CMC is an effective filler to improve the properties of starch/plant fiber foaming tableware materials, which can greatly promote the development of bio-based polymer foam materials.