Cell Recycle Research Articles

High cell density sequential batch fermentation for enhanced propionic acid production from glucose and glycerol/glucose mixture using Acidipropionibacterium acidipropionici

BackgroundPropionic acid fermentation from renewable feedstock suffers from low volumetric productivity and final product concentration, which limits the industrial feasibility of the microbial route. High cell density fermentation techniques overcome these limitations. Here, propionic acid (PA) production from glucose and a crude glycerol/glucose mixture was evaluated using Acidipropionibacterium acidipropionici, in high cell density (HCD) batch fermentations with cell recycle. The agro-industrial by-product, heat-treated potato juice, was used as N-source.ResultsUsing 40 g/L glucose for nine consecutive batches yielded an average of 18.76 ± 1.34 g/L of PA per batch (0.59 gPA/gGlu) at a maximum rate of 1.15 gPA/L.h, and a maximum biomass of 39.89 gCDW/L. Succinic acid (SA) and acetic acid (AA) were obtained as major by-products and the mass ratio of PA:SA:AA was 100:23:25. When a crude glycerol/glucose mixture (60 g/L:30 g/L) was used for 6 consecutive batches with cell recycle, an average of 35.36 ± 2.17 g/L of PA was obtained per batch (0.51 gPA/gC-source) at a maximum rate of 0.35 g/L.h, and reaching a maximum biomass concentration of 12.66 gCDW/L. The PA:SA:AA mass ratio was 100:29:3. Further addition of 0.75 mg/L biotin as a supplement to the culture medium enhanced the cell growth reaching 21.89 gCDW/L, and PA productivity to 0.48 g/L.h, but also doubled AA concentration.ConclusionThis is the highest reported productivity from glycerol/glucose co-fermentation where majority of the culture medium components comprised industrial by-products (crude glycerol and HTPJ). HCD batch fermentations with cell recycling are promising approaches towards industrialization of the bioprocess.

Advancements and Challenges in Photovoltaic Cell Recycling: A Comprehensive Review

This review examines the complex landscape of photovoltaic (PV) module recycling and outlines the challenges hindering widespread adoption and efficiency. Technological complexities resulting from different module compositions, different recycling processes and economic hurdles are significant barriers. Inadequate infrastructure, regulatory gaps and limited awareness are also hampering progress. In addition, this analysis draws parallels between the development of PV module recycling and recycling technologies for other high-tech products, such as lithium-ion batteries, highlighting similarities in regulatory and technical feasibility challenges. Amid these challenges, however, lie opportunities for a sustainable future. Technological advances, stakeholder collaboration and the adoption of circular economy principles emerge as key ways forward. This review highlights the need for concerted action to overcome barriers and drive the development of efficient and sustainable PV module recycling practices.

Lactic Acid Production by Enterococcus durans Is Improved by Cell Recycling and pH Control

Lactic acid bacteria are widely used because they produce lactic acid naturally, are resistant to acidic pH and a wide temperature range, and frequently produce lactic acid as a primary metabolite. In this study, Enterococcus durans isolated from buffalo milk was employed in lactic acid fermentation with the primary goal of obtaining fermentation parameters for an effective process enabling the use of lactose as an alternative carbon source. Fermentative parameters such as initial concentration of carbon source, dissolved oxygen concentration, cell recycling, and batch with pulse operation mode were studied to find the best conditions for L-(+)-lactic acid production. The association of 20 g·L−1 of lactose with 10 g·L−1 of glucose enabled the best bioconversion to lactic acid. Anaerobiosis did not contribute to increasing lactic acid production. Batch fermentation with cell recycling was the strategy that enhanced lactic acid production and lactose consumption, reaching 26.07 g·L−1, 0.36 g·L−1·h−1 of productivity and yielding about 0.86 g·g−1. It is fundamental to evaluate the parameters of lactic acid fermentation and provide efficient and sustainable production methods.

Low-grade heat recycling of vertical thermoelectric cells based on thermal-induced electric double layer

Employing electric double-layer (EDL) capacitors to harvest low-grade heat (LGH) is a novel technique in the high-efficiency energy absorption field. This work reports the fabrication of a vertical thermoelectric cell, based on a nanoporous graphene electrode immersed in low-concentration saline solution, for use as thermo-charging supercapacitors to convert LGH to electricity via thermally induced voltage. Because of a large specific area and a large number of micropores of nanoporous graphene films, the effective thermoelectric coefficient of the thermoelectric cell containing 0.01 M KCl solution can reach as high as 4.73 mV/°C. However, many factors, such as electrode materials, electrolyte solutions, and energy conversion device components, determine the efficiency of a thermoelectric conversion device. In summary, the device has a lower internal resistance and higher output voltage when the concentration of KCl solution is 0.05 M, and demonstrates higher thermoelectric conversion efficiency. Moreover, improving the conductivity of the electrolyte solution without affecting the device output voltage is also a way to reduce the internal power consumption of the device. The specific power and thermoelectric conversion efficiency of the device are increased by several orders of magnitude when uniformly dispersed silver nanoparticles are added to the potassium chloride solution to enhance the conductivity of the solution. The specific power underwent an increase from 0.50 mW g−1 to 42.37 mW g−1, and the thermoelectric conversion efficiency also increased from 0.0022% to 0.1358%.

Novel Technologies for Butyric Acid Fermentation: Use of Cellulosic Biomass, Rapid Bioreactor, and Efficient Product Recovery

Butyric acid, a four-carbon fatty acid, is an important industrial chemical and feedstock. To produce this chemical, a control fermentation was run with a 126.5 g.L−1 glucose concentration in the feed medium. In this medium, the strain produced 44.8 g.L−1 total acid with a productivity of 0.23 g.L−1h−1 and a yield of 0.41 g.g−1. The strain (Clostridium tyrobutyricum ATCC 25755) was also able to utilize glucose and xylose simultaneously with similar fermentation performance. The culture was also used to produce butyric acid from wheat straw hydrolysate (WSH) employing a hot water pretreatment. In a batch system, the strain resulted in a productivity and yield of 0.27 g.L−1h−1 and 0.44 g.g−1, respectively, which was an improvement over the use of glucose or xylose alone or mixtures of both. To improve reactor productivity, a membrane cell recycle bioreactor was used which resulted in a productivity of 1.89 g.L−1h−1. This productivity was 822% of that achieved in the glucose or xylose batch fermentation. Furthermore, a butyric acid recovery method was developed using XAD-4 adsorbent resin. In this system, up to 206.1 g.L−1 of butyric acid was used in the feed and, as a result of the quick adsorption, the residual butyric acid concentration was 29.5 g.L−1. In this experiment, the rate of acid removal of 1059.4 g.L−1h−1 was achieved.

Non-coding RNAs in Regulation of Protein Aggregation and Clearance Pathways: Current Perspectives Towards Alzheimer's Research and Therapy.

Alzheimer's disease (AD) is the leading cause of dementia, affecting approximately 45.0 million people worldwide and ranking as the fifth leading cause of mortality. AD is identified by neurofibrillary tangles (NFTs), which include abnormally phosphorylated tau-protein and amyloid protein (amyloid plaques). Peptide dysregulation is caused by an imbalance between the production and clearance of the amyloid-beta (Aβ) and NFT. AD begins to develop when these peptides are not cleared from the body. As a result, understanding the processes that control both normal and pathological protein recycling in neuronal cells is critical. Insufficient Aβ and NFT clearance are important factors in the development of AD. Autophagy, lysosomal dysfunction, and ubiquitin-proteasome dysfunction have potential roles in the pathogenesis of many neurodegenerative disorders, particularly in AD. Modulation of these pathways may provide a novel treatment strategy for AD. Non-coding RNAs (ncRNAs) have recently emerged as important biological regulators, with particular relevance to the emergence and development of neurodegenerative disorders such as AD. ncRNAs can be used as potential therapeutic targets and diagnostic biomarkers due to their critical regulatory functions in several biological processes involved in disease development, such as the aggregation and accumulation of Aβ and NFT. It is evident that ncRNAs play a role in the pathophysiology of AD. In this communication, we explored the link between ncRNAs and AD and their regulatory mechanisms that may help in finding new therapeutic targets and AD medications.

Insights into Peptidoglycan-Targeting Radiotracers for Imaging Bacterial Infections: Updates, Challenges, and Future Perspectives.

The unique structural architecture of the peptidoglycan allows for the stratification of bacteria as either Gram-negative or Gram-positive, which makes bacterial cells distinguishable from mammalian cells. This classification has received attention as a potential target for diagnostic and therapeutic purposes. Bacteria's ability to metabolically integrate peptidoglycan precursors during cell wall biosynthesis and recycling offers an opportunity to target and image pathogens in their biological state. This Review explores the peptidoglycan biosynthesis for bacteria-specific targeting for infection imaging. Current and potential radiolabeled peptidoglycan precursors for bacterial infection imaging, their development status, and their performance in vitro and/or in vivo are highlighted. We conclude by providing our thoughts on how to shape this area of research for future clinical translation.

Prodigiosin Inhibits Transforming Growth Factor β Signaling by Interfering Receptor Recycling and Subcellular Translocation in Epithelial Cells.

Prodigiosin (PG) is a naturally occurring polypyrrole red pigment produced by numerous microorganisms including some Serratia and Streptomyces strains. PG has exhibited promising anticancer activity; however, the molecular mechanisms of action of PG on malignant cells remain ambiguous. Transforming growth factor-β (TGF-β) is a multifunctional cytokine that governs a wide array of cellular processes in development and tissue homeostasis. Malfunctions of TGF-β signaling are associated with numerous human cancers. Emerging evidence underscores the significance of internalized TGF-β receptors and their intracellular trafficking in initiating signaling cascades. In this study, we identified PG as a potent inhibitor of the TGF-β pathway. PG blocked TGF-β signaling by targeting multiple sites of this pathway, including facilitating the sequestering of TGF-β receptors in the cytoplasm by impeding the recycling of type II TGF-β receptors to the cell surface. Additionally, PG prompts a reduction in the abundance of receptors on the cell surface through the disruption of the receptor glycosylation. In human Caucasian lung carcinoma cells and human hepatocellular cancer cell line cells, nanomolar concentrations of PG substantially diminish TGF-β-triggered phosphorylation of Smad2 protein. This attenuation is further reflected in the suppression of downstream target gene expression, including those encoding fibronectin, plasminogen activator inhibitor-1, and N-cadherin. SIGNIFICANCE STATEMENT: Prodigiosin (PG) emerges from this study as a potent TGF-β pathway inhibitor, disrupting receptor trafficking and glycosylation and reducing TGF-β signaling and downstream gene expression. These findings not only shed light on PG's potential therapeutic role but also present a captivating avenue towards future anti-TGF-β strategies.

Continuous fermentation using high cell density cell recycle system for L-lactic acid production.

For complete utilization of high glucose at ∼100 g/L, a high cell density (HCD) continuous fermentation system was established using Lb. delbrueckii NCIM 2025 for the bioproduction of lactic acid (LA). An integrated membrane cell recycling system coupled with the continuous bioreactor, aided to achieve the highest 34.77 g/L h LA productivity and 0.94-0.98 g/g yield. ∼34 times higher productivity was observed (in comparison to batch fermentation conducted in this study), when the continuous operations were carried out at the maximum dilution rate and wet cell weight i.e. 0.36 h-1 and 230 g/L, respectively. These results show the potential of this method for large-scale lactic acid production because it not only produces high titers but also ensures that glucose is used effectively. The method's superior performance in comparison to earlier studies suggests it as an affordable and sustainable alternative for the production of LA.

Closing the loop: recycling of MAPbI3 perovskite solar cells

Closed-loop recycling of MAPbI3 solar cells: maintaining performance while enhancing economic and environmental benefits.

Development of Photovoltaic Cell Efficiency and Recycling

Development of Photovoltaic Cell Efficiency and Recycling

Economic potential of recovery and recycling of silicone photovoltaics cells and non-ferrous metals as part of the transition towards a circular economy

The article aims to assess the economic recovery and recycling of silicon PV cells and the non-ferrous metals contained in them, taking into account the analysis of costs, benefits and factors: legal, ecological, technical, technological and social. The research methodology was based on statistical measures related to the analysis of PV structure and changes in individual years of operation. For the designated structures, the current state of knowledge and legal status in the field of recycling methods of exploited PV installations were defined. In addition, an analysis of the Polish market about selected developed countries concerning the recycling sector was performed, and the identification of key factors and barriers to the development of the analysed sector was presented. On this basis, the possibilities and directions of support for the PV recycling sector were indicated, and a SWOT analysis of possible methods of its support was made.

(Invited) Sustainable Recycling of Metals from Solar Cells

The share of solar energy is increasing worldwide, leading to a widespread use of solar panels. Knowing that the 80 Mt of waste solar panels will be produced by 2050, sustainable processes must be designed in order to deal with the inevitable increase of waste solar cells in the coming years.The main advantage associated with recycling is to avoid the inevitable dispersion of hazardous materials in the environment occurring when the solar cells are landfilled. It also reduces the need for primary mineral resources and may reduce the supply risk for important components like silicon wafers, for which the production is concentrated in a few countries. The recycling process applied plays a major role to allow reducing the carbon footprint of solar cells, advocating in favour of sustainable practices for solar cells recycling.Mono-crystalline solar cells representing 90% of the market, it is therefore this kind of solar cells that are more likely to reach their end-of-life soon. Mono-crystalline solar cells are made of an aluminium frame surrounding the solar module. Underneath a glass layer, layers of ethylene vinyl acetate (EVA) encapsulate the solar cell. The solar cell in itself is made of a silicon wafer with aluminium and silver electrode as well as a silicon nitride anti-reflective coating. Recycling of the metals, particularly silver, is the main economic driver for solar cells recycling.Recycling mono-crystalline solar cells involves a mechanical removal of the aluminium frame and the junction box prior to removal of the glass and EVA layers. Different process were evaluated to get rid of EVA. Solvent-assisted dissolution allowed EVA dissolution but it requires the use of harmful solvents and often leads to breakage of the solar cell. Pyrolysis allows to recover the wafer intact while removing the glass and polymers layers. Provided that the thermal treatment is applied under an inert atmosphere, EVA decomposition leads to relatively non-toxic chemicals such as acetic acid. Recent developments include laser assisted would lead to efficient and straightforward removal of EVA.The removal of metals from the solar cells involves the use of harsh chemicals such as hydrofluoric acid for the removal of silicon nitride, nitric acid to solubilise silver and sodium hydroxide for the dissolution of aluminium. Recently, the use of aqueous brines was introduced to recover silver and aluminium from solar cells. A green and re-usable oxidising agent such as iron(III) chloride can be used to oxidise and dissolve silver, as evidenced in Figure 1, which shows a solar cells before (up) and after (down) etching, revealing the removal of the white silver lines.Using water as a solvent, silver dissolution is impossible due to the low chloride content. By increasing the chloride content, oxidation of silver and its dissolution becomes possible due to the formation of iron-chloride and silver-chloride complexes which have a different redox behaviour and a higher solubility. Overall, silver is completely dissolved in about 10 minutes without using any acids or harmful chemical. Silver can be easily recovered by precipitation or cementation, while the oxidising agent can be regenerated using oxygen from air or via electrolytic means. The objective of this presentation is to give an overview of the current recycling options and provide some guidance on the best and more sustainable practices for the complete recycling of solar cells. The choice is guided by techno-economic analysis and life cycle assessment as well as experimental demonstration of the recycling on real waste solar cells. Figure 1

Neuro-fuzzy modelling of a continuous stirred tank bioreactor with ceramic membrane technology for treating petroleum refinery effluent: a case study from Assam, India.

A continuous stirred tank bioreactor (CSTB) with cell recycling combined with ceramic membrane technology and inoculated with Rhodococcus opacus PD630 was employed to treat petroleum refinery wastewater for simultaneous chemical oxygen demand (COD) removal and lipid production from the retentate obtained during wastewater treatment. In the present study, the COD removal efficiency (CODRE) (%) and lipid concentration (g/L) were predicted using two artificial intelligence models, i.e., an artificial neural network (ANN) and a neuro-fuzzy neural network (NF-NN) with a network topology of 6-25-2 being the best for NF-NN. The results revealed the superiority of NF-NN over ANN in terms of determination coefficient (R2), root mean square error (RMSE), and mean absolute percentage error (MAPE). Three learning algorithms were tested with NF-NN; among them, the Bayesian regularization backpropagation (BR-BP) outperformed others. The sensitivity analysis revealed that, if solid retention time and biomass concentrations were maintained between 35 and 75h and 3.0g/L and 3.5g/L, respectively, high CODRE (93%) and lipid concentration (2.8g/L) could be obtained consistently.

Rab11 suppresses head and neck carcinoma by regulating EGFR and EpCAM exosome secretion

ObjectivesRab11(Rab11a and Rab11b) localizes primarily along recycling endosomes in cells and is involved in various intracellular trafficking processes, including membrane receptor recycling and secretion of exosomes or small extracellular vesicles (EVs). Although Rab11 is closely associated with the progression and metastasis of various cancer types, little is known about Rab11’ role in head and neck squamous cell carcinoma (HNSCC). In this study, we investigated the roles of Rab11a and Rab11b in HNSCC. MethodsThe clinical significance of Rab11 expression in HNSCC was investigated using a public database and tissue microarray analysis. Stable cell lines with loss and gain of Rab11a or Rab11b were originally established to investigate their roles in the proliferative, migratory, and invasive capabilities of HNSCC cells. ResultsDatabase analysis revealed a significant association between Rab11b mRNA expression and a favorable patient survival rate in HNSCC. Tissue microarray analysis revealed that Rab11b expression was the highest in normal tissues and gradually decreased across the stages of HNSCC progression. Overexpression of Rab11a or Rab11b resulted in a decrease in epidermal growth factor receptor (EGFR), Epithelial cell adhesion molecule (EpCAM) exosome secretion, and the migratory and invasive potential of HNSCC cells. The knockdown of Rab11a or Rab11b increased EpCAM/CD9 exosome secretion in addition to the migratory and invasive potential of HNSCC cells. ConclusionsRab11 suppresses HNSCC by regulating EGFR recycling and EpCAM exosome secretion in HNSCC cells. Our results indicate that Rab11b is a superior prognostic indicator of HNSCC and holds promise for developing novel therapeutic strategies.

Oxide-Halide Perovskite Composites for Simultaneous Recycling of Lead Zirconate Titanate Piezoceramics and Methylammonium Lead Iodide Solar Cells.

Global concerns over energy availability and the environment impose an urgent requirement for sustainable manufacturing, usage, and disposal of electronic components. Piezoelectric and photovoltaic components are being extensively used. They contain the hazardous element, Pb (e.g., in widely used and researched Pb(Zr,Ti)O3 and halide perovskites), but they are not being properly recycled or reused. This work demonstrates the fabrication of upside-down composite sensor materials using crushed ceramic particles recycled from broken piezoceramics, polycrystalline halide perovskite powder collected from waste dye-sensitized solar cells, and crystal particles of a Cd-based perovskite composition, C6H5N(CH3)3CdBr3 xCl3(1- x ). The piezoceramic and halide perovskite particles are used as filler and binder, respectively, to show a proof of concept for the chemical and microstructural compatibility between the oxide and halide perovskite compounds while being recycled simultaneously. Production of the recycled and reusable materials requires only a marginal energy budget while achieving a very high material densification of >92%, as well as a 40% higher piezoelectric voltage coefficient, i.e., better sensing capability, than the pristine piezoceramics. This work thus offers an energy- and environmentally friendly approach to the recycling of hazardous elements as well as giving a second life to waste piezoelectric and photovoltaic components.

Liquid Metal‐Based Perovskite Solar Cells: In Situ Formed Gallium Oxide Interlayer Improves Stability and Efficiency

AbstractIn this study, eutectic gallium–indium alloy (EGaIn) liquid metal is used as the rear electrode for perovskite solar cells (PSCs), where the interfacial properties of the device, particularly the beneficial roles of the surface oxide of the liquid metal, are explored. The findings demonstrate that the native oxide of the EGaIn electrode significantly affects the stability of photovoltaic performance and impedance characteristics including series and shunt resistances. Based on the results, the following hypothesis is formulated: the oxide interlayer serves two crucial functions of a barrier against metal diffusion and a tunnel for enhancing charge extraction and transfer. The results of elemental mapping and trap density calculation support the former function of the hypothesis that the oxide film can effectively prevent metal penetration into the perovskite layer. Furthermore, measurements involving capacitance−voltage and time‐resolved photoluminescence confirm that the oxide film on the liquid metal eliminates the interfacial Schottky barrier, promoting efficient charge extraction and transfer processes. Finally, the investigation is extended to develop flexible PSCs using the EGaIn electrode, which consistently exhibits stable performance during repeated bending cycles. Notably, the EGaIn rear electrode can be readily removed and collected through a straightforward acid treatment, offering a promising avenue for efficient cell recycling.

Electrolyzer and Fuel Cell Recycling for a Circular Hydrogen Economy

AbstractElectrolyzers and fuel cells will be crucial for achieving global clean hydrogen and industrial decarbonization goals. However, the nascent clean hydrogen sector faces uncertainties around material supply chains and technology end‐of‐life management. This work aims to guide the transition to a circular hydrogen economy by using process modeling, techno‐economic analysis, and life cycle assessment to evaluate the material cost, energy use, greenhouse gas (GHG) emissions, toxicity, and water use of five potential recycling strategies for proton exchange membrane electrolyzers (PEMWE) and fuel cells (PEMFC). Hydrometallurgy, acid dissolution, and electrochemical dissolution are shown to offer 2–7 times improvement across all assessed metrics relative to the manufacturing of PEMWE and PEMFC from raw materials. Recycling can also lower the raw material demand, material cost, energy use, and GHG emissions associated with PEMWE and PEMFC deployment in the United States in 2050 by 23%, 19%, 21%, and 16%, respectively. This study provides key insights into the costs, benefits, and complexities of recycling strategies for PEMWE and PEMFC, aiding the development of a circular economy that is synergistic with clean hydrogen deployment.

Continuous microalgae cultivation for wastewater treatment – Development of a process strategy during day and night

Conventional wastewater treatment (WWT) is not able to recycle nutrients from the wastewater (WW) directly. Microalgae integrate the valuable nutrients nitrogen and phosphorus within their biomass very efficiently, making them predestined for an application in WWT. Nevertheless, microalgae-based processes are driven by natural sunlight as energy source, making a continuous process mode during day and night difficult. The aim of this study was therefore to investigate metabolic activities of the continuously cultivated microalgae Chlorella vulgaris at light and dark periods (16 h,8 h) with focus on nutrient uptake during night from a synthetic WW. Varying the dilution rate D (D = 0.0–1.0 d−1 in 0.1 d−1-steps) causes different limitations for algae growth. Nutrient limitations at low D's cause maximum accumulation of intracellular storage components (sum of carbohydrates and lipids) of ~70 % of dry biomass, starch is converted to lipids at the absence of light. From middle to high D's, the growth rate is determined by light limitation, reducing the intracellular storage components to ~20 % of dry biomass. Complete nutrient uptake is measurable up to D = 0.5 d−1, marking the maximum operating point for wastewater purification. At that point, cells are characterised by high protein (up to 57%DBM) and pigment (up to 6.9%DBM) quotas. During the night, the build-up of proteins at the degradation of intracellular storage components is furthermore visible. Applying the concept of active biomass (cells without storage components), a constant cellular protein (~68%ABM) and nitrogen quota (11.94%ABM) was revealed. A nitrogen spiking experiment clearly showed nitrogen uptake and proliferation during the night period. Based on the experimental data, a window of operation for a continuous WWT process was designed, allowing the hypothesis that continuous WWT using microalgae during day and night operation is possible without the supplementation of artificial light. This revealed the system's capacity to treat WW throughout 24 h applying cell recycling and storage of carbohydrate-rich biomass. At the end of the night, protein-rich biomass is available for further valorisation.

Efficient laboratory perovskite solar cell recycling with a one-step chemical treatment and recovery of ITO-coated glass substrates

The proliferation of organic–inorganic perovskite solar cells (PSCs) has garnered considerable attention due to their potential for low-cost, large-scale photovoltaic panel production. However, the inclusion of lead in PSCs poses significant sustainability challenges, necessitating effective end-of-life treatment strategies to mitigate environmental pollution and comply with electronic waste disposal regulations. In this study, we present a novel recycling system for decomposing and reclaiming the constituent materials of a typical PSC. Utilizing a one-step solution process extraction approach, we successfully preserved the chemical composition of each layer, enabling their potential reuse. This recycling method not only addresses the separation of the toxic lead component but also emphasizes the recovery of other valuable PSC layers. Notably, the commonly used hole transport layer in perovskite solar cells is Spiro-OMeTAD, which was successfully extracted with chlorobenzene, with its purity subsequently confirmed. Moreover, the removal of individual layers facilitated the retrieval of indium-doped tin oxide (ITO) conductive glass, a critical substrate in PSC fabrication. Comparative analysis of the physical and electrical properties of recycled and reference ITO substrates revealed minimal discrepancies, indicating the feasibility of reusing recycled substrates without compromising device performance. The proposed recycling technique offers a practical approach to mitigate pollution risks, minimize waste generation during the recycling process of perovskite-based solar cells, and reduce end-of-life recycling costs.