Cell-derived Extracellular Matrix Research Articles

Cultured cell-derived extracellular matrices to enhance the osteogenic differentiation and angiogenic properties of human mesenchymal stem/stromal cells.

Cell-derived extracellular matrix (ECM) consists of a complex assembly of fibrillary proteins, matrix macromolecules, and associated growth factors that mimic the composition and organization of native ECM micro-environment. Therefore, cultured cell-derived ECM has been used as a scaffold for tissue engineering settings to create a biomimetic micro-environment, providing physical, chemical, and mechanical cues to cells, and support cell adhesion, proliferation, migration, and differentiation. Here, we present a new strategy to produce different combinations of decellularized cultured cell-derived ECM (dECM) obtained from different cultured cell types, namely, mesenchymal stem/stromal cells (MSCs) and human umbilical vein endothelial cells (HUVECs), as well as the coculture of MSC:HUVEC and investigate the effects of its various compositions on cell metabolic activity, osteogenic differentiation, and angiogenic properties of human bone marrow (BM)-derived MSCs, vital features for adult bone tissue regeneration and repair. Our findings demonstrate that dECM presented higher cell metabolic activity compared with tissue culture polystyrene. More importantly, we show that MSC:HUVEC ECM enhanced the osteogenic and angiogenic potential of BM MSCs, as assessed by in vitro assays. Interestingly, MSC:HUVEC (1:3) ECM demonstrated the best angiogenic response of MSCs in the conditions tested. To the best of our knowledge, this is the first study that demonstrates that dECM derived from a coculture of MSC:HUVEC impacts the osteogenic and angiogenic capabilities of BM MSCs, suggesting the potential use of MSC:HUVEC ECM as a therapeutic product to improve clinical outcomes in bone regeneration.

Fabrication of extracellular matrix-coated conductive polypyrrole-poly(l-lactide) fiber-films and their synergistic effect with (nerve growth factor)/(epidermal growth factor) on neurites growth

Non-nerve cell-derived extracellular matrix (ECM) was coated on the aligned porous polypyrrole-poly(l-lactide) (PPy-PLLA) fiber-films with the conductivity of ∼12 mS/m via L929 cells culture and lysing, resulting in ∼10% increase of PC12 cells attachment and ∼26 μm increase of neurites length. The neurite length of ∼149 μm in EGF/NGF group (optimal concentration radio of 12.5/50 (ng/mL)) on aligned and ECM-conjugated fiber-films was significantly larger than ∼94 μm in only NGF group (50 ng/mL), confirming the synergy of EGF, NGF and aligned ECM-conjuaged PPy-PLLA fibers. When differentiated PC12 cells were exerted electrical stimulation (ES) of 100 mV/cm for 4 h/day in 2 day through ECM-PPy-PLLA fiber-films, their neurite length reached to ∼251 μm, significantly larger than ∼149 μm of group without ES, due to the higer expression of related neural proteins in ES group. A simple mechanism was proposed to analyze synergistical effect of ECM, EGF, NGF on axons adhesion and elongation along the aligned ECM-coated fibers under ES condition.

Contributions of Fibroblasts, Extracellular Matrix, Stiffness, and Mechanosensing to Hepatocarcinogenesis.

Hepatocellular carcinoma (HCC) is the third leading cause of cancer mortality worldwide. A unique feature of liver cancer is its close association with liver fibrosis. About 90% of HCCs develop in advanced liver fibrosis or cirrhosis, suggesting an important role for the fibrotic microenvironment in driving HCC development. Here, the authors will discuss functional contributions of liver fibrosis to the development of HCC, focusing on mechanisms through which fibrosis may promote HCC development such as hepatic stellate cell-derived extracellular matrix, growth factors, and cytokines, stiffness-induced signaling pathways, and immunosuppression. Better understanding of these factors in HCC development and progression may provide the basis for novel stromal-based therapies for tumor prevention or therapy.

Extracellular matrix derived by human umbilical cord-deposited mesenchymal stem cells accelerates chondrocyte proliferation and differentiation potential in vitro.

The extracellular matrix (ECM) is a dynamic and intricate three-dimensional (3D) microenvironment with excellent biophysical, biomechanical, and biochemical properties that may directly or indirectly regulate cell behavior, including proliferation, adhesion, migration, and differentiation. Compared with tissue-derived ECM, cell-derived ECM potentially has more advantages, including less potential for pathogen transfer, fewer inflammatory or anti-host immune responses, and a closer resemblance to the native ECM microenvironment. Different types of cell-derived ECM, such as adipose stem cells, synovium-derived stem cells and bone marrow stromal cells, their effects on articular chondrocytes which have been researched. In this study, we aimed to develop a 3D cell culture substrate using decellularized ECM derived from human umbilical cord-derived mesenchymal stem cells (hUCMSCs), and evaluated the effects on articular chondrocytes. We evaluated the morphology and components of hUCMSC-derived ECM using physical and chemical methods. Morphological, histological, immunohistochemical, biochemical, and real-time PCR analyses demonstrated that proliferation and differentiation capacity of chondrocytes using the 3D hUCMSC-derived ECM culture substrate was superior to that using non-coated two-dimensional plastic culture plates. In conclusion, 3D decellularized ECM derived from hUCMSCs offers a tissue-specific microenvironment for in vitro culture of chondrocytes, which not only markedly promoted chondrocyte proliferation but also preserved the differentiation capacity of chondrocytes. Therefore, our findings suggest that a 3D cell-derived ECM microenvironment represents a promising prospect for autologous chondrocyte-based cartilage tissue engineering and regeneration. The hUCMSC-derived ECM as a biomaterial is used for the preparation of scaffold or hybrid scaffold products which need to further study in the future.

Corrigendum

International Wound JournalVolume 16, Issue 3 p. 873-873 CORRIGENDUMOpen Access Corrigendum This article corrects the following: Wound-healing effect of adipose stem cell-derived extracellular matrix sheet on full-thickness skin defect rat model: Histological and immunohistochemical study Yoon J. Lee, Seung E. Baek, Sujin Lee, Yeon J. Jeong, Ki J. Kim, Young J. Jun, Jong W. Rhie, Volume 16Issue 1International Wound Journal pages: 286-296 First Published online: November 20, 2018 First published: 07 April 2019 https://doi.org/10.1111/iwj.13131AboutSectionsPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat In this paper,1 the fourth author, Yong W. Cho, and his affiliation have been removed in conformance with the requirement for the copyright that was obtained from the American Chemical Society to use the data in Table 1 of this article. Here is updated author-by-line and author affiliation sections following the changes: Yoon J. Lee1 | Seung E. Baek2 | Sujin Lee2 | Yeon J. Jeong1 | Ki J. Kim2 | Young J. Jun2 | Jong W. Rhie2 1Department of Plastic and Reconstructive Surgery, Yeouido St Mary's Hospital, College of Medicine, The Catholic University of Korea, Seoul, Korea 2Department of Plastic and Reconstructive Surgery, Seoul St Mary's Hospital, College of Medicine, The Catholic University of Korea, Seoul, Korea And here is the updated caption for Table 1 that cites the copyright for the American Chemical Society: Profile of growth factors in the ECM sheet derived from human adipose tissue using growth factor antibody assays. Adapted with permission from “Injectable and thermosensitive soluble extracellular matrix and methylcellulose hydrogels for stem cell delivery in skin wounds”.24 Copyright 2016 American Chemical Society The online version of the article has been corrected. The authors would like to apologize for the inconvenience caused. REFERENCE 1Lee YJ, Baek SE, Lee S, et al. Wound-healing effect of adipose stem cell-derived extracellular matrix sheet on full-thickness skin defect rat model: Histological and immunohistochemical study. Int Wound J. 2019; 16: 286- 296. https://doi.org/10.1111/iwj.13030. Volume16, Issue3June 2019Pages 873-873 ReferencesRelatedInformation

Lysyl Oxidase Like 2 Processing by Factor Xa Modulates its Activity and Localization

IntroductionLysyl oxidase like 2 (LOXL2) is a member of the lysyl oxidase (LOX) family of amine oxidases that catalyzes the oxidative deamination of lysine residues to crosslink extracellular matrix (ECM) proteins, thereby forming a stable and highly organized matrix. LOXL2 is shown to be involved in a diverse set of diseases including hepatic fibrosis and cancer metastasis, due to its critical role in tubulogenesis, matrix assembly, and angiogenesis. Despite the significant advances made in linking LOXL2 to fibrosis initiation and disease progression, the mechanisms of LOXL2 regulation are still largely unknown.Prior studies have shown that LOXL2 is processed extracellularly and LOXL2 processing putatively regulates its catalytic function. However, the exact identity of the protease that processes LOXL2 remains unknown. Specifically, LOXL2 is composed of a C‐terminal prototypic LOX domain that has the enzymatic function to catalyze ECM protein crosslinking, and four N‐terminal scavenger receptor cysteine rich (SRCR) domains, which are typically involved in protein‐protein recognition and signaling. Extracellular processing releases an N‐terminus fragment of 317 amino acids containing SRCR domains 1–2 and a C‐terminus fragment of SRCR domains 3–4 along with the LOX domain.Methods and ResultsIn silico digest of LOXL2 using the ExPASy peptide cutter showed Factor Xa as the potential protease that cleaves LOXL2 at position 317. Therefore, we first tested processing of exogenously expressed LOXL2 in cell culture media in vitro. Factor Xa dose dependently increased LOXL2 processing, and this was inhibited using aprotinin (non‐specific inhibitor) and rivaroxaban (specific inhibitor). We next determined the effect of LOXL2 processing on its sub‐cellular localization. Comparing the full‐length and processed LOXL2 content in the conditioned cell‐culture media and ECM showed that full length LOXL2 is predominantly found in the ECM and the processed form is found predominantly in the media. Next, we investigated whether LOXL2 processing regulates its catalytic activity. To this end, we measured the in‐situ assembly of FITC‐labeled collagen I or elastin, the main substrates of LOXL2, by processed and full length LOXL2. The incorporation of collagen I/elastin and the deposition of LOXL2 were visualized by confocal epifluorescence microscopy. Our findings indicate that LOXL2 processing markedly reduces collagen I/elastin incorporation when compared to that by full‐length LOXL2.ConclusionsFactor Xa is the protease responsible for LOXL2 processing in vitro. LOXL2 processing inhibits its ability to utilize collagen I and elastin as substrates. Future studies will continue to 1) investigate whether LOXL2 processing regulates its substrate specificity by shifting LOXL2 catalysis to Collagen IV, 2) determine the functions of the cleaved SRCR1–2 propeptide, 3) identify the specific mechanism by which processed and full length LOXL2 are trafficked to the cell‐derived ECM, and 4) evaluate the in vivo significance of this processing in the vascular compartment.Support or Funding InformationFunded by JHMI ACCM StAAR Grant.This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Co-culture cell-derived extracellular matrix loaded electrospun microfibrous scaffolds for bone tissue engineering

Cell-derived extracellular matrix (ECM) has been employed as scaffolds for tissue engineering, creating a biomimetic microenvironment that provides physical, chemical and mechanical cues for cells and supports cell adhesion, proliferation, migration and differentiation by mimicking their in vivo microenvironment. Despite the enhanced bioactivity of cell-derived ECM, its application as a scaffold to regenerate hard tissues such as bone is still hampered by its insufficient mechanical properties. The combination of cell-derived ECM with synthetic biomaterials might result in an effective strategy to enhance scaffold mechanical properties and structural support. Electrospinning has been used in bone tissue engineering to fabricate fibrous and porous scaffolds, mimicking the hierarchical organized fibrillar structure and architecture found in the ECM. Although the structure of the scaffold might be similar to ECM architecture, most of these electrospun scaffolds have failed to achieve functionality due to a lack of bioactivity and osteoinductive factors. In this study, we developed bioactive cell-derived ECM electrospun polycaprolactone (PCL) scaffolds produced from ECM derived from human mesenchymal stem/stromal cells (MSC), human umbilical vein endothelial cells (HUVEC) and their combination based on the hypothesis that the cell-derived ECM incorporated into the PCL fibers would enhance the biofunctionality of the scaffold. The aims of this study were to fabricate and characterize cell-derived ECM electrospun PCL scaffolds and assess their ability to enhance osteogenic differentiation of MSCs, envisaging bone tissue engineering applications. Our findings demonstrate that all cell-derived ECM electrospun scaffolds promoted significant cell proliferation compared to PCL alone, while presenting similar physical/mechanical properties. Additionally, MSC:HUVEC-ECM electrospun scaffolds significantly enhanced osteogenic differentiation of MSCs as verified by increased ALP activity and osteogenic gene expression levels. To our knowledge, these results describe the first study suggesting that MSC:HUVEC-ECM might be developed as a biomimetic electrospun scaffold for bone tissue engineering applications.

Compositional and structural analysis of glycosaminoglycans in cell-derived extracellular matrices.

The extracellular matrix (ECM) is a highly dynamic and complex meshwork of proteins and glycosaminoglycans (GAGs) with a crucial role in tissue homeostasis and organization not only by defining tissue architecture and mechanical properties, but also by providing chemical cues that regulate major biological processes. GAGs are associated with important physiological functions, acting as modulators of signaling pathways regulating several cellular processes such as cell growth and differentiation. Recently, in vitro fabricated cell-derived ECM have emerged as promising materials for regenerative medicine due to their ability of better recapitulate the native ECM-like composition and structure, without the limitations of availability and pathogen transfer risks of tissue-derived ECM scaffolds. However, little is known about the molecular and more specifically, GAG composition of these cell-derived ECM. In this study, three different cell-derived ECM were produced in vitro and characterized in terms of their GAG content, composition and sulfation patterns using a highly sensitive liquid chromatography-tandem mass spectrometry technique. Distinct GAG compositions and disaccharide sulfation patterns were verified for the different cell-derived ECM. Additionally, the effect of decellularization method on the GAG and disaccharide relative composition was also assessed. In summary, the method presented here offers a novel approach to determine the GAG composition of cell-derived ECM, which we believe is critical for a better understanding of ECM role in directing cellular responses and has the potential for generating important knowledge to use in the development of novel ECM-like biomaterials for tissue engineering applications.

A Fibrous Hybrid Patch Couples Cell-Derived Matrix and Poly(l-lactide-co-caprolactone) for Endothelial Cells Delivery and Skin Wound Repair.

Skin wound healing is an intricate orchestration that involves different cell types, an extracellular matrix (ECM), cytokines, and growth factors. On the basis of the great benefits of cell-derived ECM in regenerative applications, here we propose an electrospun fibrous membrane that combines poly(l-lactide-co-caprolactone) (PLCL) and human fibroblast-derived ECM (hFDM). hFDM-deposited PLCL (hFDM-PLCL) was obtained via decellularization of a confluent layer of fibroblasts cultivated on PLCL. An organized assembly of fibrillar structure on hFDM-PLCL was notable via immunostaining. As human umbilical vein endothelial cells (HUVECs) were seeded on the hFDM-PLCL, they proliferated faster and exhibited more elongated, capillary-like morphology than those on PLCL or fibronectin-coated PLCL (Fn-PLCL). HUVECs have a relatively large aspect ratio, spreading area, and vinculin-positive area per cell on the fibrillary structure of hFDM-PLCL. In addition, transwell cell migration assay showed the chemoattractant effect of hFDM for HUVECs and human dermal fibroblasts. Furthermore, HUVECs-loaded hFDM-PLCL membranes showed the most promising therapeutic effects on a mouse skin wound model as proved via the wound closure rate, neovascularization effect, regenerated epidermis, and skin appendage. This study shows that biodegradable PLCL fibers not only support the weak mechanical properties of hFDM but also allow hFDM to reserve ECM macromolecules and to maintain structural integrity. Current results also demonstrate the critical role of hFDM with biochemical and biophysical cues on HUVECs adhesion, proliferation, and vascular morphogenesis in vitro and even on the wound healing process in vivo. Taken together, hFDM-functionalized PLCL patch should be a promising platform for cell delivery and regenerative applications.

Wound-healing effect of adipose stem cell-derived extracellular matrix sheet on full-thickness skin defect rat model: Histological and immunohistochemical study.

The potential use of extracellular matrix (ECM) as a source of wound dressing material has recently received much attention. The ECM is an intricate network of various combinations of elastin, collagens, laminin, fibronectin, and proteoglycans that play a key role in stimulating cell proliferation and differentiation. We evaluated the efficacy of an ECM sheet derived from human adipose tissue as a wound dressing material to enhance healing. We prepared a novel porous ECM sheet dressing scaffold from human adipose tissue. in vitro analysis of the ECM sheets showed efficient decellularisation; absence of immunostimulatory components; and the presence of a wide number of angiogenic and bioactive factors, including collagen, elastin, and proteoglycans. To evaluate in vivo efficacy, full-thickness excisional wounds were created on the dorsal skin of a rat, and the ECM sheets; secondary healing foam wound dressing, Healoderm; or a conventional dressing were applied to each wound site. Photographs were taken every other day, and the degree of reepithelialisation of the wounds was determined. Application of an ECM sheet dressing enhanced the macroscopic wound-healing rate on days 4, 7, and 10 compared with that in the control group. Microscopic analysis indicated that the reepithelialisation rate of the wound was higher in the ECM group compared with that in the control group; the reepithelialisation rate was better than that of the secondary healing foam wound dressing. Moreover, a denser and more organised granulation tissue was formed in the ECM sheet group compared with that in the secondary healing foam wound dressing and control groups. The ECM sheet also showed the highest microvessel density compared with the secondary healing foam wound dressing and control groups. Based on these data, we suggest that a bioactive ECM sheet dressing derived from human adipose can provide therapeutic proteins for wound healing.

Nanoengineered, cell-derived extracellular matrix influences ECM-related gene expression of mesenchymal stem cells

BackgroundHuman mesenchymal stem cells (hMSCs) are, due to their pluripotency, useful sources of cells for stem cell therapy and tissue regeneration. The phenotypes of hMSCs are strongly influenced by their microenvironment, in particular the extracellular matrix (ECM), the composition and structure of which are important in regulating stem cell fate. In reciprocal manner, the properties of ECM are remodeled by the hMSCs, but the mechanism involved in ECM remodeling by hMSCs under topographical stimulus is unclear. In this study, we therefore examined the effect of nanotopography on the expression of ECM proteins by hMSCs by analyzing the quantity and structure of the ECM on a nanogrooved surface.MethodsTo develop the nanoengineered, hMSC-derived ECM, we fabricated the nanogrooves on a coverglass using a UV-curable polyurethane acrylate (PUA). Then, hMSCs were cultivated on the nanogrooves, and the cells at the full confluency were decellularized. To analyze the effect of nanotopography on the hMSCs, the hMSCs were re-seeded on the nanoengineered, hMSC-derived ECM.ResultshMSCs cultured within the nano-engineered hMSC-derived ECM sheet showed a different pattern of expression of ECM proteins from those cultured on ECM-free, nanogrooved surface. Moreover, hMSCs on the nano-engineered ECM sheet had a shorter vinculin length and were less well-aligned than those on the other surface. In addition, the expression pattern of ECM-related genes by hMSCs on the nanoengineered ECM sheet was altered. Interestingly, the expression of genes for osteogenesis-related ECM proteins was downregulated, while that of genes for chondrogenesis-related ECM proteins was upregulated, on the nanoengineered ECM sheet.ConclusionsThe nanoengineered ECM influenced the phenotypic features of hMSCs, and that hMSCs can remodel their ECM microenvironment in the presence of a nanostructured ECM to guide differentiation into a specific lineage.

The Role of Tumor Microenvironment in Chemoresistance: 3D Extracellular Matrices as Accomplices.

Background: The functional interplay between tumor cells and their adjacent stroma has been suggested to play crucial roles in the initiation and progression of tumors and the effectiveness of chemotherapy. The extracellular matrix (ECM), a complex network of extracellular proteins, provides both physical and chemicals cues necessary for cell proliferation, survival, and migration. Understanding how ECM composition and biomechanical properties affect cancer progression and response to chemotherapeutic drugs is vital to the development of targeted treatments. Methods: 3D cell-derived-ECMs and esophageal cancer cell lines were used as a model to investigate the effect of ECM proteins on esophageal cancer cell lines response to chemotherapeutics. Immunohistochemical and qRT-PCR evaluation of ECM proteins and integrin gene expression was done on clinical esophageal squamous cell carcinoma biopsies. Esophageal cancer cell lines (WHCO1, WHCO5, WHCO6, KYSE180, KYSE 450 and KYSE 520) were cultured on decellularised ECMs (fibroblasts-derived ECM; cancer cell-derived ECM; combinatorial-ECM) and treated with 0.1% Dimethyl sulfoxide (DMSO), 4.2 µM cisplatin, 3.5 µM 5-fluorouracil and 2.5 µM epirubicin for 24 h. Cell proliferation, cell cycle progression, colony formation, apoptosis, migration and activation of signaling pathways were used as our study endpoints. Results: The expression of collagens, fibronectin and laminins was significantly increased in esophageal squamous cell carcinomas (ESCC) tumor samples compared to the corresponding normal tissue. Decellularised ECMs abrogated the effect of drugs on cancer cell cycling, proliferation and reduced drug induced apoptosis by 20–60% that of those plated on plastic. The mitogen-activated protein kinase-extracellular signal-regulated kinase (MEK-ERK) and phosphoinositide 3-kinase-protein kinase B (PI3K/Akt) signaling pathways were upregulated in the presence of the ECMs. Furthermore, our data show that concomitant addition of chemotherapeutic drugs and the use of collagen- and fibronectin-deficient ECMs through siRNA inhibition synergistically increased cancer cell sensitivity to drugs by 30–50%, and reduced colony formation and cancer cell migration. Conclusion: Our study shows that ECM proteins play a key role in the response of cancer cells to chemotherapy and suggest that targeting ECM proteins can be an effective therapeutic strategy against chemoresistant tumors.

Development of a Novel Human Cell-Derived Tissue-Engineered Heart Valve for Transcatheter Aortic Valve Replacement: an In Vitro and In Vivo Feasibility Study.

Transcatheter aortic valve replacement (TAVR) is being extended to younger patients. However, TAVR-compatible bioprostheses are based on xenogeneic materials with limited durability. Off-the-shelf tissue-engineered heart valves (TEHVs) with remodeling capacity may overcome the shortcomings of current TAVR devices. Here, we develop for the first time a TEHV for TAVR, based on human cell-derived extracellular matrix and integrated into a state-of-the-art stent for TAVR. The TEHVs, characterized by a dense acellular collagenous matrix, demonstrated in vitro functionality under aortic pressure conditions (n = 4). Next, transapical TAVR feasibility and in vivo TEHV functionality were assessed in acute studies (n = 5) in sheep. The valves successfully coped with the aortic environment, showing normal leaflet motion, free coronary flow, and absence of stenosis or paravalvular leak. At explantation, TEHVs presented full structural integrity and initial cell infiltration. Its long-term performance proven, such TEHV could fulfill the need for next-generation lifelong TAVR prostheses.

Human mesenchymal stromal cells in adhesion to cell-derived extracellular matrix and titanium: Comparative kinome profile analysis.

The extracellular matrix (ECM) physically supports cells and influences stem cell behaviour, modulating kinase‐mediated signalling cascades. Cell‐derived ECMs have emerged in bone regeneration as they reproduce physiological tissue‐architecture and ameliorate mesenchymal stromal cell (MSC) properties. Titanium scaffolds show good mechanical properties, facilitate cell adhesion, and have been routinely used for bone tissue engineering (BTE). We analyzed the kinomic signature of human MSCs in adhesion to an osteopromotive osteoblast‐derived ECM, and compared it to MSCs on titanium. PamChip kinase‐array analysis revealed 63 phosphorylated peptides on ECM and 59 on titanium, with MSCs on ECM exhibiting significantly higher kinase activity than on titanium. MSCs on the two substrates showed overlapping kinome profiles, with activation of similar signalling pathways (FAK, ERK, and PI3K signalling). Inhibition of PI3K signalling in cells significantly reduced adhesion to ECM and increased the number of nonadherent cells on both substrates. In summary, this study comprehensively characterized the kinase activity in MSCs on cell‐derived ECM and titanium, highlighting the role of PI3K signalling in kinomic changes regulating osteoblast viability and adhesion. Kinome profile analysis represents a powerful tool to select pathways to better understand cell behaviour. Osteoblast‐derived ECM could be further investigated as titanium scaffold‐coating to improve BTE.

Keratinocytes negatively regulate the N-cadherin levels of melanoma cells via contact-mediated calcium regulation

In human skin, melanocytes and their neighboring keratinocytes have a close functional interrelationship. Keratinocytes, which represent the prevalent cell type of human skin, regulate melanocytes through various mechanisms. Here, we use a keratinocyte and melanoma co-culture system to show for the first time that keratinocytes regulate the cell surface expression of N-cadherin through cell-cell contact. Compared to mono-cultured human melanoma A375 cells, which expressed high levels of N-cadherin, those co-cultured with the HaCaT human keratinocyte cell line showed reduced levels of N-cadherin. This reduction was most evident in areas of A375 cells that underwent cell-cell contact with the HaCaT cells, whereas HaCaT cell-derived extracellular matrix and conditioned medium both failed to reduce N-cadherin levels. The intracellular level of calcium in co-cultured A375 cells was lower than that in mono-cultured A375 cells, and treatment with a cell-permeant calcium chelator (BAPTA) reduced the N-cadherin level of mono-cultured A375 cells. Furthermore, co-culture with HaCaT cells reduced the expression levels of transient receptor potential cation channel (TRPC) 1, −3 and −6 in A375 cells, and siRNA-mediated multi-depletion of TRPC1, -3 and -6 reduced the N-cadherin level in these cells. Taken together, these data suggest that keratinocytes negatively regulate the N-cadherin levels of melanoma cells via cell-to-cell contact-mediated calcium regulation.

Self-assembled human osseous cell sheets as living biopapers for the laser-assisted bioprinting of human endothelial cells

A major challenge during the engineering of voluminous bone tissues is to maintain cell viability in the central regions of the construct. In vitro prevascularization of bone substitutes relying on endothelial cell bioprinting has the potential to resolve this issue and to replicate the native bone microvasculature. Laser-assisted bioprinting (LAB) commonly uses biological layers of hydrogel, called ‘biopapers’, to support patterns of printed cells and constitute the basic units of the construct. The self-assembly approach of tissue engineering allows the production of biomimetic cell-derived bone extracellular matrix including living cells. We hypothesized that self-assembled osseous sheets can serve as living biopapers to support the LAB of human endothelial cells and thus guide tubule-like structure formation. Human umbilical vein endothelial cells were bioprinted on the surface of the biopapers following a predefined pattern of lines. The osseous biopapers showed relevant matrix mineralization and pro-angiogenic hallmarks. Our results revealed that formation of tubule-like structures was favored when the cellular orientation within the biopaper was parallel to the printed lines. Altogether, we validated that human osseous cell sheets can be used as biopapers for LAB, allowing the production of human prevascularized cell-based osseous constructs that can be relevant for autologous bone repair applications.

Decellularized materials derived from TSP2-KO mice promote enhanced neovascularization and integration in diabetic wounds

Decellularized biologic scaffolds are gaining popularity over synthetic biomaterials as naturally derived materials capable of promoting improved healing. Nevertheless, the most widely used biologic material – acellular dermal matrix (ADM) – exhibits slow repopulation and remodeling, which prevents integration. Additionally, engineering control of these materials is limited because they require a natural source for their production. In the current report, we demonstrate the feasibility of using genetically engineered animals to create decellularized biologic scaffolds with favorable extracellular matrix (ECM) properties. Specifically, we utilized skin from thrombospondin (TSP)-2 KO mice to derive various decellularized products. Scanning electron microscopy and mechanical testing showed that TSP-2 KO ADM exhibited an altered structure and a reduction in elastic modulus and ultimate tensile strength, respectively. When a powdered form of KO ADM was implanted subcutaneously, it was able to promote enhanced vascularization over WT. Additionally, when implanted subcutaneously, intact slabs of KO ADM were populated by higher number of host cells when compared to WT. In vitro studies confirmed the promigratory properties of KO ADM. Specifically, degradation products released by pepsin digestion of KO ADM induced greater cell migration than WT. Moreover, cell-derived ECM from TSP-2 null fibroblasts was more permissive to fibroblast migration. Finally, ADMs were implanted in a diabetic wound model to examine their ability to accelerate wound healing. KO ADM exhibited enhanced remodeling and vascular maturation, indicative of efficient integration. Overall, we demonstrate that genetic manipulation enables engineered ECM-based materials with increased regenerative potential.

Inhibition of osteoclastogenesis by stem cell-derived extracellular matrix through modulation of intracellular reactive oxygen species

Decellularized extracellular matrix (ECM) derived from stem cells has been shown as a promising biomaterial for bone regeneration because of the promotion effect on osteogenesis in mesenchymal stem cells (MSCs). However, bone regeneration is also influenced by bone resorption and little is known about the effect of cell-derived ECM on osteoclast differentiation. In this study, ECM was deposited by MSCs and, after decellularization, the effect of ECM on osteoclastogenesis of bone marrow monocytes (BMMs) was investigated in comparison to standard tissue culture polystyrene. Our results showed that cell-derived ECM improved BMM proliferation but potently inhibited osteoclast differentiation, evidenced by down-regulation of multinucleated tartrate-resistant acid phosphatase (TRAP)-positive cells, areas of actin rings, and osteoclast-specific gene expression. ECM-mediated attenuation of intracellular reactive oxygen species (ROS) was suggested to play a rival role in the inhibition of osteoclastogenesis, because exogenous hydrogen peroxide supplementation partially rescued the ECM-inhibited osteoclastogenesis. Furthermore, rather than collagen type I, fibronectin in the ECM contributed to ECM-mediated anti-osteoclastogenesis. In conclusion, stem cell-derived decellularized ECM significantly suppressed osteoclastogenesis via the attenuation of intracellular ROS. The anti-osteoclastogenic property of cell-derived ECM may benefit its clinical use for modulating bone remodeling and promoting bone tissue engineering. Statement of SignificanceDecellularized extracellular matrix (ECM) derived from stem cells has been shown as a promising biomaterial for bone regeneration; however, bone remodeling is influenced by bone resorption and little is known about the effect of cell-derived ECM on osteoclast differentiation. Cell-derived ECM improved BMM proliferation but potently inhibited osteoclast differentiation. ECM-mediated attenuation of intracellular reactive oxygen species was suggested to play a rival role in osteoclastogenesis. Fibronectin in cell-derived ECM also contributed to ECM-mediated anti-osteoclastogenesis. The anti-osteoclastogenic property of cell-derived ECM may benefit clinically for modulating bone remodeling and promoting bone tissue engineering.

Differentiated osteoblasts derived decellularized extracellular matrix to promote osteogenic differentiation

BackgroundThe extracellular matrix (ECM) can directly or indirectly influence on regulation of cell functions such as cell adhesion, migration, proliferation and differentiation. The cell derived ECM (CD-ECM) is a useful in vitro model for studying the comprehensive functions of CD-ECM because it maintains a native-like structure and composition. In this study, the CD-ECM is obtained and a test is carried out to determine the effectiveness of several combinations of decellularized methods. These methods were used to regulate the optimal ECM compositions to be induced by osteogenic differentiation using primary isolated osteoblasts.ResultWe investigated the effect of osteoblasts re-seeded onto normal osteoblast ECM under the growth medium (GM-ECM) and the osteogenic differentiation medium (OD-ECM). The osteoblasts were then cultured statically for 1, 2, and 4 weeks in a growth medium or differentiation medium. Before osteoblast culture, we performed immunostaining with filamentous actin and nuclei, and then performed DNA quantification. After each culture period, the osteogenic differentiation of the osteoblasts re-seeded on the OD-ECMs was enhanced osteogenic differentiation which confirmed by alkaline phosphatase staining and quantification, Alizarin Red S staining and quantification, and von Kossa staining. The OD-ECM-4 W group showed more effective osteogenic differentiation than GM-ECM and OD-ECM-2 W.ConclusionsThe OD-ECM-4 W has a better capacity in a microenvironment that supports osteogenic differentiation on the GM-ECM and OD-ECM-2 W. The ECM substrate has a wide range of applications as cell culture system or direct differentiation of stem cell and excellent potential as cell-based tissue repair in orthopedic tissue engineering.

Proteomic Analysis of Nucleus Pulposus Cell-derived Extracellular Matrix Niche and Its Effect on Phenotypic Alteration of Dermal Fibroblasts

Reconstituting biomimetic matrix niche in vitro and culturing cells at the cell niche interface is necessary to understand the effect and function of the specific matrix niche. Here we attempted to reconstitute a biomimetic extracellular matrix (ECM) niche by culturing nucleus pulposus cells (NPCs) in a collagen microsphere system previously established and allowing them to remodel the template matrix. The reconstituted NPC-derived complex ECM was obtained after decellularization and the composition of such niche was evaluated by proteomic analysis. Results showed that a complex acellular matrix niche consisting of ECM proteins and cytoskeletal proteins by comparing with the template collagen matrix starting material. In order to study the significance of the NPC-derived matrix niche, dermal fibroblasts were repopulated in such niche and the phenotypes of these cells were changed, gene expression of collagen type II and CA12 increased significantly. A biomimetic NPC-derived cell niche consisting of complex ECM can be reconstituted in vitro, and repopulating such matrix niche with fibroblasts resulted in changes in phenotypic markers. This work reports a 3D in vitro model to study cell niche factors, contributing to future understanding of cellular interactions at the cell-niche interface and rationalized scaffold design for tissue engineering.